Where do you think most of the water
will go?
split the same
though the path of little rocks
though the path of big rocka

Answer:

ΔT = 4.9°C

Explanation:

The thermal energy of the bar can be given as follows:

Thermal Energy = mCΔT

where,

m = mass of bar = 1 kg

C = specific heat capacity of aluminum = 1020 J/kg.°C

ΔT = Change in Temperature = ?

Therefore,

5000 J = (1 kg)(1020 J/kg.°C)ΔT

ΔT = (5000 J)/(1020 J/°C)

ΔT = 4.9°C

Solution:

Mass of liquid water and water vapor in the insulated tank initially = 1.4 kg

Temperature = 200 °C

And 25% of the volume by liquid water is steam.

State 1

[tex]$m=\frac{V}{v}$[/tex]

[tex]$m=m_f+m_g$[/tex]

[tex]$1.4=\frac{0.25V}{v_f}+\frac{0.75V}{v_g}$[/tex]

[tex]$1.4=\frac{0.25V}{1.1565 \times 10^{-3}}+\frac{0.75V}{0.1274}$[/tex]       (taking the value of [tex]$v_g$[/tex] and [tex]$v_g$[/tex] at 200°C  )

[tex]$V=6.304 \times 10^{-3}$[/tex]

Now quality of vapor

[tex]$x=\frac{m_g}{m}$[/tex]

  [tex]$=3.377 \times 10^{-3}$[/tex]

Internal energy at state 1 can be found out by

[tex]$u_1=u_f+xu_{fg}$[/tex]

    [tex]$=850.65+3.377\times10^{-3}\times 1744.65$[/tex]

    = 856.54 kJ/kg

After heating with the resistor for 20 minutes, at state 2, the tank contains saturated water vapor [tex]$v_2=v_g \text { and }\ x=1$[/tex]

Tank is rigid, so volume of tank is constant.

[tex]$v_g=v_2=\frac{V}{m}$[/tex]

[tex]$v_g=\frac{6.304\times 10^{-3}}{1.4}$[/tex]

[tex]$v_g=4.502 \times 10^{-3} \ m^3 /kg$[/tex]

Now interpolate the value to get temperature at state 2 with specific volume value to get final temperature

[tex]$T_2=360+(374.14-360)\left(\frac{0.004502-0.006945}{0.003155-0.006945}\right)$[/tex]

   = 369.11° C

Internal energy at state 2

[tex]$u_2=2154.9 \ kJ/kg$[/tex]

Now power rating of the resistor

[tex]$P=\frac{m(u_2-u_1)}{t}$[/tex]

[tex]$P=\frac{1.4(2154.9-856.54)}{20 \times 60}$[/tex]

  = 1.51 kW

Answer:

45 degrees

Explanation:

a projectile travels the farthest when it is launches at the angle of 45 degree.

Answer:

B. An opposing force caused by friction produced a lower acceleration than calculated

Explanation:

Answer:

An opposing force caused by friction produced a lower acceleration than calculated.

Explanation:

Answer:

12.18

Explanation:

The maximum height that the orange will reach is 12.18 m.

When an object is thrown at an angle from the horizontal direction, the object is said to be in projectile motion.

You throw an orange out a window at a height of 12.00 meters upwards at an angle of 32° to the horizontal at a velocity of 3.5 m/s.

If u is the initial speed, the maximum height of the ball from the point of throwing is

H = u² sin²θ / 2g

Put the values, we get

H = 3.5² sin²32° / (2x9.81)

H = 0.1753 m

So, the maximum height calculated from the ground is

12 + 0.18 = 12.18 m

Thus ,the maximum height that the orange will reach is 12.18 m.

Learn more about projectile.

brainly.com/question/11422992

#SPJ2

Answer:

The arrow of the second archer standing on a high building will have more potential energy.

The arrow of the first archer standing on ground will have more kinetic energy.

Explanation:

POTENTIAL ENERGY:

The potential energy of an object depends upon its height, as given in the formula:

P.E = mgh

Hence, the arrow with the greater height will have more potential energy.

Therefore, the arrow of the second archer standing on a high building will have more potential energy.

KINETIC ENERGY:

The kinetic energy of an object depends upon its speed, as given in the formula:

K.E = (1/2)mv²

Hence, the arrow with the greater speed will have more kinetic energy energy. Since, the second arrow is stationary, it will have zero kinetic energy. But, the first arrow will have some K.E due to its speed.

Therefore, the arrow of the first archer standing on ground will have more kinetic energy.

(a)  The second archer standing at the top of the building will have more potential energy.

(b) The first archer on the ground level will have the more kinetic energy.

The potential energy of an object is the energy possessed by the object by virtue its position above above the ground.

P.E = mgh

where;

Thus, the second archer standing at the top of the building will have more potential energy.

(b) The kinetic energy of an object is the energy possessed by the object due to its motion.

K.E = ¹/₂mv²

where;

An object in motion, has zero velocity at maximum height but maximum velocity on the ground level.

Thus, the first archer on the ground level will have the more kinetic energy.

Learn more here:https://brainly.com/question/21866017

Answer:

it is hit by an external force

Explanation:

Answer:

ask questions that the findings bring up

Explanation:

hope this helps :)

Answer:

ask questions that the findings bring up

Answer:

The velocity the stone must be thrown with is 20 m/s.

Explanation:

Given;

time taken for the stone to reach it highest point, t = 2 s

acceleration due to gravity, g = 10 m/s²

The maximum height reached by the stone at the given time is calculated as;

[tex]h = \frac{1}{2}gt^2\\\\h = \frac{1}{2}*10*2^2\\\\h = 20 \ m[/tex]

Determine the initial of the stone;

v² = u² + 2gh

where;

v is the final velocity of the stone at maximum height = 0

u is the initial velocity of the stone = ?

0 = u² - 2(10 x 20)

0 = u² - 400

u² = 400

u = √400

u = 20 m/s

Therefore, the velocity the stone must be thrown with is 20 m/s.

Answer:

Explanation:

Given

the range = 5.00m (distance moved in horizontal direction)

Height = 0.150m

Required

Initial velocity of the dart

Using the formula for calculating range of a projectile;

R = U√2H/g

5 = U√2(0.15)/9.8

5 = U√0.0306

5 = 0.1749U

U = 5/0.1749

U = 28.59m/s

Hence the initial horizontal velocity of the dart is 28.59m/s

Answer:

28.59

Explanation:

khan academy

Answer:

W = 1493.9 J = 1.49 KJ

Explanation:

The work done by the elevator on the object will be equal to the gain in is potential energy:

W = ΔP.E

W = mgΔh

where,

W = Work = ?

m = mass of object = 7.4 kg

g = 9.8 m/s²

Δh = gain in height = 20.6 m

Therefore,

W = (7.4 kg)(9.8 m/s²)(20.6 m)

W = 1493.9 J = 1.49 KJ

Answer:

I think it's A and D.

Answer:

a) El número de neutrones de Cl-35 es 18 y del Cl-37 es 20.

b) La masa atómica media del cloro es 35.5 uma.

c) En 15 g de cloro hay 2.55x10²³ átomos.    

Explanation:

a) Para calcular los protones y neutrones de los isótopos Cl-35 y Cl-37 debemos usar la siguiente fórmula:

[tex] A = Z + N [/tex]

En donde:

Z: es el número de protones = 17

N: es el número de neutrones

A: es la masa atómica

Los isótopos de un elemento dado tienen el mismo número de protones (número atómico) y en ellos sólo varia la la masa atómica (y por ende el número de neutrones); por lo que el Cl-35 y Cl-37 tienen igual Z (17).

Para el Cl-35 tenemos:

[tex] N = A - Z = 35 - 17 = 18 [/tex]

Y para el Cl-37 tenemos:

[tex]N = 37 - 17 = 20[/tex]

Por lo tanto, el número de neutrones de Cl-35 es 18 y del Cl-37 es 20.

b) La masa atómica media del cloro está dada por:

[tex]M_{Cl} = A_{Cl-35}*\%_{Cl-35} + A_{Cl-37}*\%_{Cl-37} = 35 u*\frac{75}{100} + 37 u*\frac{25}{100} = 35.5 u[/tex]  

Entonces, la masa atómica media del cloro es 35.5 uma.

c) Para encontrar el número de átomos de Cl que hay en 15 g debemos usar el número de Avogadro (6.022x10²³ átomos/mol):

[tex] N = \frac{1 mol}{35.5 g}*15 g*\frac{6.022 \cdot 10^{23} atomos}{1 mol} = 2.55 \cdot 10^{23} atomos [/tex]

Finalmente, en 15 g de cloro hay 2.55x10²³ átomos.

Espero que te sea de utilidad!          

Answer:

Replication of the DNA must occur. Segregation of the "original" and its "replica" follow. Cytokinesis ends the cell division process. Whether the cell was eukaryotic or prokaryotic, these basic events must occur.

Answer:

See below

Explanation:

ICT " Information and the communication technology" can be used in sectors like Telecommunications. ADB support for telecommunications and ICT is changing lives across the region. ...

ICT in Education. ICT can improve the efficiency and quality of education at all levels. ...

ICT in Public Sector Management. ...

ICT in Health. ...

ICT in Agriculture and Food Security.

( hope it helped <3 )

Answer:

C. It will remain constant because the total amount of thermal energy  plus chemical potential energy stays the same.

Explanation:

According to the law of conservation of energy, the total energy of this system will remain constant because the total amount of thermal energy plus chemical potential energy stays the same.

Answer:

1144.8

Explanation:

1 meter per second is equal to 3.6 kilometers per hour

Answer:

Mass, m = 71.42 kg

Explanation:

Given that,

Normal force acting on a box, F = 700 N

We need to find the mass of a box. Let it is m. Normal force acting on an object is balanced by its weight such that,

F = mg

Where m is the mass of the box

[tex]m=\dfrac{F}{g}\\\\m=\dfrac{700\ N}{9.8\ m/s^2}\\\\m=71.42\ kg[/tex]

So, the mass of the box is 71.42 kg.

Answer:

The percentage uncertainty in his calculated value of density is [tex]\pm 0.713\,\%[/tex].

Explanation:

We can estimate the absolute uncertainty by the definition of total differential. That is:

[tex]\Delta \rho \approx \frac{\partial \rho}{\partial m}\cdot \Delta m + \frac{\partial \rho}{\partial d}\cdot \Delta d + \frac{\partial \rho}{\partial l}\cdot \Delta l[/tex] (1)

Where:

[tex]\frac{\partial \rho}{\partial m}[/tex] - Partial derivative of the density with respect to mass, measured in [tex]\frac{1}{mm^{3}}[/tex].

[tex]\frac{\partial \rho}{\partial d}[/tex] - Partial derivative of the density with respect to diameter, measured in grams per cubic milimeter.

[tex]\frac{\partial \rho}{\partial l}[/tex] - Partial derivative of the density with respect to length, measured in grams per cubic milimeter.

[tex]\Delta m[/tex] - Mass uncertainty, measured in grams.

[tex]\Delta d[/tex] - Diameter uncertainty, measured in milimeters.

[tex]\Delta l[/tex] - Length uncertainty, measured in milimeters.

[tex]\Delta \rho[/tex] - Density uncertainty, measured in grams per cubic milimeters.

Partial derivatives are, respectively:

[tex]\frac{\partial \rho}{\partial m} = \frac{4}{\pi\cdot d^{2}\cdot l}[/tex] (2)

[tex]\frac{\partial \rho}{\partial d} = -\frac{8\cdot m}{\pi\cdot d^{3}\cdot l}[/tex] (3)

[tex]\frac{\partial \rho}{\partial l} = - \frac{4\cdot m}{\pi\cdot d^{2}\cdot l^{2}}[/tex] (4)

And we expand (1) as follows:

[tex]\Delta \rho \approx \frac{4\cdot \Delta m}{\pi\cdot d^{2}\cdot l} - \frac{8\cdot m\cdot \Delta d}{\pi\cdot d^{3}\cdot l}-\frac{4\cdot m\cdot \Delta l}{\pi\cdot d^{2}\cdot l^{2}}[/tex]

[tex]\Delta \rho \approx \left(\frac{4}{\pi\cdot d^{2}\cdot l}\right)\cdot \left(\Delta m -\frac{m\cdot \Delta d}{d}-\frac{m \cdot \Delta l}{l} \right)[/tex] (5)

If we know that [tex]d = 2\,mm[/tex], [tex]l = 25\,mm[/tex], [tex]m = 6.2\,g[/tex], [tex]\Delta m = \pm 0.1\,g[/tex], [tex]\Delta d = \pm 0.01\,mm[/tex] and [tex]\Delta l = \pm 0.1\,mm[/tex], then the absolute uncertainty is:

[tex]\Delta \rho \approx \pm\left[\frac{4}{\pi\cdot (2\,mm)^{2}\cdot (25\,mm)} \right]\cdot \left[(0.1\,g)-\frac{(6.2\,g)\cdot (0.01\,mm)}{2\,mm} -\frac{(6.2\,g)\cdot (0.1\,mm)}{25\,mm} \right][/tex]

[tex]\Delta \rho \approx \pm 5.628\times 10^{-4}\,\frac{g}{mm^{3}}[/tex]

And the expected density is:

[tex]\rho = \frac{4\cdot m}{\pi\cdot d^{2}\cdot l}[/tex] (6)

[tex]\rho = \frac{4\cdot (6.2\,g)}{\pi\cdot (2\,mm)^{2}\cdot (25\,mm)}[/tex]

[tex]\rho \approx 78.941\times 10^{-3}\,\frac{g}{mm^{3}}[/tex]

The percentage uncertainty in his calculated value of density is:

[tex]\%e = \frac{\Delta \rho}{\rho}\times 100\,\%[/tex] (7)

If we know that [tex]\Delta \rho \approx \pm 5.628\times 10^{-4}\,\frac{g}{mm^{3}}[/tex] and [tex]\rho \approx 78.941\times 10^{-3}\,\frac{g}{mm^{3}}[/tex], then the percentage uncertainty is:

[tex]\%e = \frac{\pm 5.628\times 10^{-4}\,\frac{g}{mm^{3}} }{78.941\times 10^{-3}\,\frac{g}{mm^{3}} }\times 100\,\%[/tex]

[tex]\%e = \pm 0.713\,\%[/tex]

The percentage uncertainty in his calculated value of density is [tex]\pm 0.713\,\%[/tex].

Answer:

0.364

I believe... Good luck!

Answer:

Speed is a description of how fast an object moves; velocity is how fast and in what direction it moves. In physics, velocity is speed in a given direction. When we say a car travels at 60 km/h, we are specifying its speed.

Answer:

Explanation:

The area of the base of the statue can be found by using the formula

[tex]a = \frac{f}{p} \\ [/tex]

f is the force

p is the pressure

From the question we have

[tex]a = \frac{1000}{20000} = \frac{1}{20} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:55,000 kg•m/s

Explanation:

Answer:

C

Explanation:

Answer:

Explanation:

a. WEIGHT: As we have seen, weight is the gravitational force exerted on an object by the Earth (or any other celestial body). If an object is near the Earth's surface and has mass, then the object has a weight. The magnitude of its weight is w = mg and its direction is toward the center of the Earth.

Answer:

no

Explanation:

because it will bind together in the molecular level