When scientists use one of their five senses to gather information, they are
A.
drawing a conclusion.
B.
making an inference.
C.
predicting a relationship
D.
making an observation.

Answer:

T = 2.83701481512 seconds

Explanation:

Hi!

The formula that you will want to use to solve this question is:

[tex]T = 2\pi *\sqrt{\frac{L}{g} }[/tex]

T--> period

L --> length of the pendulum

g --> acceleration due to gravity (9.8m/s^2)

since we know that the mass of the bob at the end of the pendulum does not affect the period of the pendulum, we can go ahead and ignore that bit of information (unless, of course, the weight causes the pendulum to stretch)

so now we can plug in our given info into the formula above and solve!

T = 2*pi * sqrt(2/9.8)

T = 2.83701481512 seconds

*Note*

- I used 3.14 to pi, if you need to use a different value for pi (a longer version, etc) your answer will be slightly different

I hope this helped!

Answer:

Distance = 13.9 meters

Explanation:

Given the following data;

Maximum speed = 150 km/hr to meters per seconds = 150 * 1000/3600 = 41.67 m/s

Decelerating speed = 3m/s

To find the distance travelled with this speed;

Distance = maximum speed/decelerating speed

Distance = 41.67/3

Distance = 13.9 meters

Therefore, the bus would travel a distance of 13.9 meters before stopping.

Answer:

Where are the answer choices?

Explanation:

Answer:

the correct answer is C

Explanation:

For this exercise we can use the conservation of angular momentum, let's define a system formed by the disk and the other body, so that the torques during the collision have been internal and the moment is conserved.

Initial instant. Before placing the second body

          L₀ = I₁ w₁

Final moment. Right after placing the body

         L_f = (I₁ + I₂) w

the moment of inertia of the ring with respect to an axis passing through its center is tabulated

         I_{cm} = m r²

we use the parallel axes theorem to find the moment of inertia about an axis passing through one end

        I₁ = I_{cm} + m d²

where d is the distance from the center of mass to the new axis

        d = r / 2

we substitute

        I₁ = mr² + m (r/2)²

        I₁ = 5/4 m r²

The second body does not specify a specific shape, so we can assume it to be punctual

        I₂ = m’ (2r)²

        I₂ = 4 m’ r²

in the exercise indicate that

        m ’= m / 4

        I₂ = m r²

how the moment of inertia is conserved

        L₀ = L_f

        I₁ w₁ = (I₁ + I₂) w

        5/4 m r² w₁ = (5/4 m r² + m r²) w

        5/4 m r² w₁ =9/4 m r² w

        w = 5/9 w₁      

we calculate

         w = 5/9 12

         w = 6.67 rad / s

having the initial and final angular velocities we can find the kinetic energy of the hoop

         K₀ = ½ I₁ w₁²

         K_f = ½ (I₁) w2

the energy ratio is

        [tex]\frac{K_f}{K_o}[/tex] = [tex]\frac{w^2}{w_1^2}[/tex]

        \frac{K_f}{K_o} = (6.67 / 12)²

        \frac{K_f}{K_o} = 0.309

        [tex]\frac{K_f}{K_o} %[/tex] = 31%

the correct answer is C

The answer is C I believe

Answer:

42

Explanation:

Multiply the difference by 8.4 to estimate the distance. ( kilometers )

P wave = 10

S wave = 15

Difference = 5

8.4 * 5 = 42

The initial wave (P wave) is less severe and moves faster, whereas the more damaging S wave moves slowly.

When an earthquake happens, it sends forth energy waves known as seismic waves. It's similar to the ripples that occur when a stone is thrown into water.

Here, There are two types of waves: P waves and S waves.

P waves travel faster and are formed first; they go in the exact opposite direction from where the earthquake occurs.

S waves, or secondary waves, on the other hand, are slower and travel in a perpendicular direction.

When these waves are generated in particular facilities, scientists can detect them.

The difference between time = 15 – 10 = 5

From the graph:

=8.4×5

= 42

Thus, the initial wave (P wave) is less severe and moves faster, whereas the more damaging S wave moves slowly.

Learn more about the seismic waves here:

https://brainly.com/question/13062627

#SPJ2

Answer:

Foot

Explanation:

Big toes

Answer:

b

Explanation:

sorry if im wrong plz no report.

Answer: B

Explanation: Friction and gravity change the motion.

Increasing the number of resistors in a parallel branch, decreases the total resistance of the system.

Parallel resistive circuit is one where the resistors are connected to the same two points (or nodes) and is identified by the fact that it has more than one current path connected to a common voltage source.

As more and more resistors are added in parallel to a circuit, the equivalent resistance of the circuit decreases and the total current of the circuit increases.

To learn more about Parallel circuit here

https://brainly.com/question/11409042

#SPJ2

Answer:Air bags can leave you in even more injury, From the impact they give

You could end up with a broken nose,arm

concussion

Answer: mark me branliest plz

Explanation:

Two objects with masses 5. 4 meters per second in 20. 8 m/s? At the end of ... A -kilogram car travels at a constant speed of 20. 18 m/s . 8 m/s2). The acceleration due to ... 5 seconds. the maximum speed an object can travel falling towards earth. ... 1 (4) 7. 0 3 101 m 3. 19)An object is dropped and falls freely to the ground ...

Answer:

a)  F = 64.30 N,  b) θ = 121.4º

Explanation:

Forces are vector quantities so one of the best methods to add them is to decompose each force and add the components

let's use trigonometry

Force F1

          sin 170 = F_{1y} / F₁

          cos 170 = F₁ₓ / F₁

          F_{1y} = F₁ sin 170

          F₁ₓ = F₁ cos 170

          F_{1y} = 100 sin 170 = 17.36 N

          F₁ₓ = 100 cos 170 = -98.48 N

Force F2

          sin 30 = F_{2y} / F₂

          cos 30 = F₂ₓ / F₂

          F_{2y} = F₂ sin 30

          F₂ₓ = F₂ cos 30

          F_{2y} = 75 sin 30 = 37.5 N

          F₂ₓ = 75 cos 30 = 64.95 N

the resultant force is

X axis

          Fₓ = F₁ₓ + F₂ₓ

          Fₓ = -98.48 +64.95

          Fₓ = -33.53 N

Y axis

         F_y = F_{1y} + F_{2y}

         F_y = 17.36 + 37.5

         F_y = 54.86 N

a) the magnitude of the resultant vector

let's use Pythagoras' theorem

         F = Ra Fx ^ 2 + Fy²

         F = Ra 33.53² + 54.86²

         F = 64.30 N

b) the direction of the resultant

let's use trigonometry

        tan θ’= F_y / Fₓ

        θ'= [tex]tan^{-1} \frac{F_y}{F_x}[/tex]

        θ'= tan⁻¹ (54.86 / (33.53)

        θ’= 58.6º

this angle is in the second quadrant

The angle measured from the positive side of the x-axis is

        θ = 180 -θ'

        θ = 180- 58.6

        θ = 121.4º

Answer:

D

Explanation:

because if the solvent is more than the solvent then we can't resolve it.

so our product will be suspended

Answer:

leader give enthusiasm and strength power to country they reflect to. be a successful and hyperbolic

Explanation:

leader is the main king of the country they reflect them to be honourable and be confident that is the way to get key on a typical African

Answer:

Matthias Schleidan

Explanation:

because Matthias Schleiden found that all plants are composed of cells, and communicated the finding to Schwann, who had found similar structures in the cells. Other researchers confirmed the similarity, as explained in his book, where he concluded, "All living things are composed of cells and cell products.

This became the cell theory.

I learn that in my old school.

Answer: [tex]0.985\times 10^{-4}\ T[/tex]

Explanation:

Given

Electron is accelerated 3.5 kV potential difference

Distance between plates d=29 mm

The potential difference between plates is V=100 V

here, the kinetic energy of an electron is acquired through a potential difference of 3.5 kV

[tex]\Rightarrow \dfrac{1}{2}m_ev^2=e\times 3.5\times 10^3\\\\\Rightarrow v=\sqrt{\dfrac{2\times 3.5\times 10^3e}{m_e}}=\sqrt{\dfrac{7\times 10^3\times 1.6\times 10^{-19}}{9.1\times 10^{-31}}}\\\\\Rightarrow v=\sqrt{1.23\times 10^{15}}=3.5\times 10^7\ m/s[/tex]

To move in a straight line Force due to magnetic field must be balanced by force due to charge

[tex]\Rightarrow F_B=F_q\\\\\Rightarrow evB=eE\\\\\Rightarrow B=\dfrac{E}{v}\\\\\Rightarrow B=\dfrac{\frac{V}{d}}{3.5\times 10^7}=\dfrac{\frac{100}{0.029}}{3.5\times 10^7}\\\\\Rightarrow B=\dfrac{3.448\times 10^3}{3.5\times 10^7}=0.985\times 10^{-4}\ T[/tex]

Answer:

B

Explanation:

Because blocks 2 and 3 have sides with unequal forces while block 1 doesnt. Plz drop a follow if this helps! ❤

Answer:

Monthly energy cost = $47.52

Explanation:

Given the following data;

Voltage = 120 Volts

Current = 8 Ampere

Time = 15 hours

Energy cost = $0.11/KWh

To find the energy cost for a month;

First of all, we would determine the power rating of the microwave oven.

Power = current * voltage

Power = 8 * 120

Power = 960 Watts

Next, we find the amount of energy consumed;

Energy = power * time

Energy = 960 * 15

Energy = 14400 Watt-hour

To kilowatt per hour, we have;

Energy = 14400/1000 = 14.4 KWh

Now, we determine the monthly energy cost;

Daily energy cost = Energy consumption * cost

Daily energy cost = 14.4 * 0.11

Daily energy cost = $1.584

Therefore, monthly energy cost = 1.584 * 30

Monthly energy cost = $47.52

Or

Monthly energy cost = 14.4 * 0.11 * 30

Monthly energy cost = $47.52

I learned the equation as P•V=k•T .

So x=1, y=1, and z= -1 .

three different states

Water is known to exist in three different states; as a solid, liquid or gas. Clouds, snow, and rain are all made of up of some form of water. A cloud is comprised of tiny water droplets and/or ice crystals, a snowflake is an aggregate of many ice crystals, and rain is just liquid water.

Answer:

Answer:

equipment for the measurement of microwave L bands with a range between 1 GHz and 2 GHz.

Explanation:

The electromagnetic spectrum can be calculated with the relationship between the speed of light, its wavelength and its frequency.

         c = λ f

For reasons of analysis and equipment used, it is artificially divided into ranges, with poorly defined limits and in some cases with overlaps between some.

For the case of analysis, f = 1.41 10⁹ Hz, we have the range called

* Microwave for f> 3 108 Hz to approximately f <3 1011 Hz

For the lower part of the frequency 3 10⁸ <f <3 10⁹ Hz we have UHF television channels and cell phones and military communications.

As the frequency observed by the researchers is in the UHF range, it is possible that they are using microwave equipment for communications, specifically equipment for the measurement of microwave L bands with a range between 1 GHz and 2 GHz.

Answer:

a. 0.332 W/m² b. 11.2 V/m c. 15.8 V/m

Explanation:

(a) the average intensity of the light,

Intensity, I = P/A where P = average power = 150.0 W and A = area through which the power emits = 4πr² where r = distance from bulb = 6 m.

So, I = P/A = P/4πr²

Substituting the values of the variables into the equation, we have

I =  P/4πr²

I =  150.0 W/4π(6 m)²

I =  150.0 W/4π(36 m²)

I =  150.0 W/452.39 m²

I =  0.332 W/m²

(b) the rms value of the electric field,

Since Intensity, I = E²/cμ₀ where E = rms value of electric field, c = speed of light = 3 × 10⁸ m/s and μ₀ = permeability of free space = 4π × 10⁻⁷ H/m.

Making E subject of the formula, we have

E² = Icμ₀

E = √(Icμ₀)

Since I = 0.332 W/m², substituting the other terms into the equation, we have

E = √(0.332 W/m² × 3 × 10⁸ m/s × 4π × 10⁻⁷ H/m.)

E = √(0.332 W/m² × 3 × 10⁸ m/s × 4π × 10⁻⁷ H/m.)

E = √(12.5 × 10)

E = √125 V/m

E = 11.18 V/m

E ≅ 11.2 V/m

(c) the peak value of the electric field.

The peak value of electric field, E' is gotten from E = E'/√2 where E = rms value of electric field.

So, E' = √2E

= √2 × 11.2 V/m

= 15.81 V/m

≅ 15.8 V/m

Answer: current I= 2 A

Explanation: when resistors are in series current I is same

Through each resistor. Potential drop along resistor R is

ΔV= IR. then I = ΔV/R = 6V/3Ω

Three resistors: R1 = 5 Ω,R2 = 3 Ω, and R3 = 4 Ω are connected in series to each other. A voltmeter connected in parallel to resistor R2 measures a voltage of 6 Volts, then the current flowing through the battery would be 2 Ampere.

Resistance is the obstruction of electrons in an electrically conducting material.

As given in the problem ,Three resistors: R1 = 5 Ω,R2 = 3 Ω, and R3 = 4 Ω are connected in series to each other. A voltmeter connected in parallel to resistor R2 measures a voltage of 6 V.

By using Ohm's Law,

V = IR

6 Volt = Electric current × 3 Ohms

Electric current = 6 volt / 3 Ohm's

                          = 2 Ampere

Thus, the current flowing through the battery would be 2 Ampere.

To learn more about resistance here, refer to the link;

brainly.com/question/14547003

#SPJ2

Answer: I think its D

Explanation: Hope this was helpful...

Explanation:

Check out the Periodic Table attached here. The Carbon family is the vertical group starting with Carbon, Group 14. Nonmetals are in green, which element there is a nonmetal?

Refers to the attachment for the answer.

Let us assume that the object of mass m is kept on the Inclined plane.

Now, there will act one force called as Component of the Weight along the Incline which is given by the Relation,

mgsinθ,

where θ is the angle which the incline makes with the surface or Angle of the Incline.

Now, If there will be no friction and the object is moving along the incline

Force = mgsinθ

⇒ ma = mgsinθ

∴ a = gsinθ

This case is valid when the angle of the Incline is greater than the angle of repose, which means the object is moving with no cause or acing of the force.

But sometimes when the object does not move without the action of force, I mean that the angle of repose is greater than the angle of the incline, then we need to apply the force so that the object can move then,

Force applied = mgsinθ

∴ a = gsinθ

It will change the cases when friction is involved.

Now, For velocity, It can be found by using the equation of Motions. Time, Distance or initial velocity, etc must be given if the question will be asked related to the velocity. So by using them, you can find that.

Answer:

I would assume a force of gravitational pull.

Explanation:

Answer:  How powerful the pull is or how many magnetic things it can pick up at one time, or a heavy magnetic object.

Explanation: