When 26400j of energy is supplied to a 2.0kg bloom of aluminum it temperature rise from 20oc to 35oc.The block is well so there is no energy lost to sorround determine the specific heat capacity of aluminum

Answers

Answer 1

Answer:

880J/kelvin

Explanation:

Q =MC ×change in t

c =C/m

C=Q/change in t

c= Q/ m× change in t

c = 26400 / 2.0 × 15

c = 880 J/kelvin


Related Questions

What is the volume of a brick that is 30 cm long, 8 cm wide, and 10 cm tall?

Answers

Anwer: volume = 30×8×10 = 2400 centimeters to the power of 3

a 2kg block is attached to a horizontal ideal spring with a spring constant of 200 Newton per minute. when the spring has its equillibrium length of block is given a speed of 5mps. what is the maximum elongation of the spring

Answers

Answer:

The maximum elongation of the spring is 0.5 meters.

Explanation:

The statement is incorrect. The correct form is:

A 2-kg block is attached to a horizontal ideal spring with a spring constant of 200 newton per meter. When the spring has its equillibrium length, the block has a speed of 5 meters per second. What is the maximum elongation of the spring?

The block experiments a simple harmonic motion, where there are no non-conservative forces and the total energy is the sum of translational kinetic energy of the mass and the elastic potential energy of the spring. The maximum elongation of the spring is done when elastic potential energy reach its maximum. By the Principle of Energy Conservation, the maximum elastic potential energy is equal to the maximum translational kinetic energy, which corresponds to the instant when the mass reaches the equilibrium position. Then, the equation modelling the system is:

[tex]U_{max} = K_{max}[/tex] (1)

Where:

[tex]U_{max}[/tex] - Maximum elastic potential energy of the spring, measured in joules.

[tex]K_{max}[/tex] - Maximum translational kinetic energy of the mass, measured in joules.

By definitions of the maximum elastic potential energy of the spring and the maximum translational kinetic energy of the mass, the expression above is expanded and simplified:

[tex]\frac{1}{2}\cdot k\cdot x_{max}^{2} = \frac{1}{2}\cdot m \cdot v_{max}^{2}[/tex]

[tex]x_{max} = \sqrt{\frac{m}{k} }\cdot v_{max}[/tex] (2)

Where:

[tex]x_{max}[/tex] - Maximum elongation of the spring, measured in meters.

[tex]m[/tex] - Mass, measured in kilograms.

[tex]k[/tex] - Spring constant, measured in newtons per meter.

[tex]v_{max}[/tex] - Maximum speed of the mass, measured in meters per second.

If we know that [tex]m = 2\,kg[/tex], [tex]k = 200\,\frac{N}{m}[/tex] and [tex]v_{max} = 5\,\frac{m}{s}[/tex], then the maximum elongation of the spring is:

[tex]x_{max} = \sqrt{\frac{2\,kg}{200\,\frac{N}{m} } }\cdot \left(5\,\frac{m}{s} \right)[/tex]

[tex]x_{max} = 0.5\,m[/tex]

The maximum elongation of the spring is 0.5 meters.

a machine
of efficiency of 70% is used to raise
a body of
mass 80 kg through
a vertical distance of 3m in
40 seconds. Calculate the power input. (Take g = 10 m/s²)​

Answers

Answer:

Power_input = 85.71 [W]

Explanation:

To be able to solve this problem we must first find the work done. Work is defined as the product of force by distance.

 [tex]W =F*d[/tex]

where:

W = work [J] (units of Joules)

F = force [N] (units of Newton)

d = distance [m]

We need to bear in mind that the force can be calculated by multiplying the mass by the gravity acceleration.

Now replacing:

 [tex]W=m*g*d[/tex]

[tex]W=80*10*3\\W=2400[J][/tex]

Power is defined as the work done over a certain time. In this way by means of the following formula, we can calculate the required power.

 [tex]P=W/t[/tex]

where:

P = power [W] (units of watts)

W = work [J]

t = time = 40 [s]

[tex]P=W/t\\P=2400/40\\P=60 [W][/tex]

The calculated power is the required power. Now as we have the efficiency of the machine, we can calculate the power that is introduced, to be able to do that work.

 [tex]Effic=0.7\\Effic=P_{required}/P_{introduced}\\P_{introduced}= 60/0.7\\P_{introduced}=85.71[W][/tex]

Based on its location on the periodic table, which metal is likely to be less reactive than both strontium and sodium?

magnesium (Mg)
barium (Ba)
cesium (Cs)
rubidium (Rb)

Answers

Answer:

Magnesium is the correct answer

Explanation:

It is magnesium because as we move down the periodic table group, atomic sizes increase which is as a result of lesser forces of attraction between nucleus and valence of an atom which makes the atom to be prone to leave as electrons so easily, elements become more reactive.

But as we move along the period , atomic sizes decrease because there is a more force of attraction between nucleus of an atom and it valence electrons making it less reactive just as the case in magnesium. Other elements are more reactive than it across the group.

Answer:

Magnesium

Explanation: Correct on edge!

Hope this Helps! :)

What is net force?
A. The sum of all the forces acting on an object
B. The difference between the largest and smallest forces acting on
an object
C. The largest force acting on an object
D. The smallest force acting on an object

Answers

Answer:

A. The sum of all the forces acting on an object.

two spheres A and B are projected off the edge of a 1.0 m high table with the same horizontal velocity . sphere A has a mass of 20.g and sphere B has a mass of 10.g.
     If both spheres leave the edge of the table at the same instant, sphere A will land
a.    at some time after sphere B.
b.    at the same time as sphere B.
c.    at some time before sphere B.
d.    There is not enough information to decide.​

Answers

Answer:

A lands first becuase its heavier

Calculate the change in entropy of 0.020 kg of ice when it melts at 0.0°C. The heat of fusion of ice is 3.36 x 10'J/kg.

Answers

Answer:

S = 2461.53 [kJ]

Explanation:

The change in entropy in a process such as melting can be calculated by means of the following expression.

[tex]S=\frac{H*m}{T}[/tex]

where:

S = entropy [kJ]

H = fusion heat = 3.36*10¹ [J/kg]

m = mass = 0.02 [kg]

T = temperature in kelvin = 273 [K]

[tex]S = \frac{0.02*3.36*10^{1} }{(273+0)}\\S = 2461.53 [kJ][/tex]

A rifle is aimed at a target 40m away. The bullet hits the target 2.2cm below the horizontal plane (ignore wind and rotational effects).
(a) What is the time of flight for bullet?
(b) What is the muzzle velocity (velocity of bullet when it leaves the rifle)?

Answers

Answer:

The value is [tex]u_x = 597 \ m/s[/tex]

Explanation:

From the question we are told that

    The distance of the target from the riffle is  [tex]d = 40 \ m[/tex]

    The height at which the bullet hit the target is  [tex]y = 2.2 \ cm = 0.022 \ m[/tex]

Considering the vertical motion  

Generally from kinematic equations we have that

        [tex]y = u_y t + \frac{1}{2} * gt^2[/tex]

At the initial stage the velocity is  zero  i.e [tex]u_y = 0 \ m/s[/tex]

=>     [tex]0.022 = 0 * t + \frac{1}{2} * 9.8 t^2[/tex]

=>    [tex]t = 0.067 \ s[/tex]

Generally the velocity of the bullet when it leaves the riffle is mathematically represented as

         [tex]u_x = \frac{ d}{t}[/tex]

=>     [tex]u_x = \frac{40 }{ 0.067 }[/tex]

=>     [tex]u_x = 597 \ m/s[/tex]

Which answer below most accurately describes both cells?

Answers

Could you provide a picture or provide an explanation of what cells they are

Which is true of low resistance wires

Answers

Answer:

the cooler the wire, the less the resistance

a 9.0-kg dog runs at 4.0 m/s and jumps onto a stationary skateboard the mas of the skateboard is 1.0 m/s what speed is the speed of the skating dog?

Answers

Answer:

1.3

Explanation:

sbsbsbsnsnssnssssssiejejeneene

A car starting at rest accelerates to a speed of 6miles/hr in 5 sec what is the average acceleration

Answers

Answer:

1.2 mi/hr/sec

Explanation:

a = Vf - Vi / t (formula)

-----------------------------------

     6mi/hr - 0 mi/hr        6 mi/hr

a = ____________ =    _______ = 1.2 mi/hr/sec

              5 sec                 5 sec

That look very confusing

ASAP
What is elastic potential energy?

Answers

Answer:

Elastic potential energy is stored when materials stretch or compress. Examples of it include springs, rubber bands, and slingshots.

Explanation:

When a ball is thrown upward, there is a loss of ____________ energy, but a gain in ___________ energy.

Answers

Answer:

Explanation:

Loss of potential energy but a gain in kinetic (becasue its falling)

Answer:

There is a loss of potential energy and a gain of kinectic

Explanation:

A double-slit interference pattern is created by two narrow slits spaced 0.21 mm apart. The distance between the first and the fifth minimum on a screen 61 cm behind the slits is 6.2 mm What is the wavelength of the light used in this experiment?

Answers

Answer:

[tex]\lambda =533.6 nm [/tex]

Explanation:

the slits spacing, d = 0.21 mm

distance of screen, D = 61 cm

The condition for minima is given as

[tex]dsin(\theta) = \left ( n+\frac{1}{2} \right )\lambda[/tex]

So, first minima, n = 0

[tex]dsin(\theta_1) = \frac{1}{2}\lambda[/tex]

fifth minima, n = 4

[tex]dsin(\theta_5) = \frac{9}{2}\lambda[/tex]

[tex]d(sin(\theta_5) -sin(\theta_1))= 4\lambda[/tex]

For small angle

[tex]d(tan(\theta_5) -tan(\theta_1))= 4\lambda[/tex]

From the figure:

[tex]d(\frac{y_5}{D}-\frac{y_1}{D})= 4\lambda[/tex]

[tex]\frac{d}{D} (y_5-y_1) = 4\lambda[/tex]

[tex]\lambda = \frac{d}{4D} (y_5-y_1)[/tex]

[tex]\lambda = \frac{0.021}{4(61)} (6.2 \times 10^{-3})[/tex]

[tex]\lambda =533.6 nm[/tex]

"533.5 nm" would be the wavelength of the light used in this experiment.

According to the question,

Slits spacing,

d = 0.21 mm

Distance of screen,

D = 61 cm

The condition for minima is given as:

→ [tex]d (sin \Theta) = (n+\frac{1}{2} ) \lambda[/tex]

So,

1st minima, n = 0

→ [tex]d sin(\Theta_1)= \frac{1}{2} \lambda[/tex]

5th minima, n = 4

→ [tex]d (sin (\Theta_5) - sin (\Theta_1) = 4 \lambda[/tex]

For small angle,

→ [tex]d (tan (\Theta_5) - tan (\Theta_1) = 4 \lambda[/tex]

From the figure, we get

→ [tex]d(\frac{y_5}{D} - \frac{y_1}{D} )= 4 \lambda[/tex]

  [tex]\frac{d}{D} (y_5 -y_1) = 4 \lambda[/tex]

                 [tex]\lambda = \frac{d}{4D}(y_5-y_1)[/tex]

                    [tex]= \frac{0.021}{4\times 61} (6.2\times 10^{-3})[/tex]

                    [tex]= 533.6 \ nm[/tex]

Thus the above answer is correct.  

Learn more:

https://brainly.com/question/14294313

The direction of electrical force is based on the fact that like charges will

Answers

yes

Explanation:

because hindi ko tlaga ala

Answer:

the answer is repel

Explanation:

A small, 300 g cart is moving at 1.10 m/s on an air track when it collides with a larger, 4.00 kg cart at rest. After the collision, the small cart recoils at 0.890 m/s. What is the speed of the large cart after the collision (answer in m/s please)?

Answers

Answer:

0.0158m/s

Explanation:

Using the law of conservation of energy which states that the sum of momentum before collision is equal to the sum after collision. It is expressed mathematically as;

m1u1 + m2u2 =  m1v1 + m2v1

m1 and m2 are the masses of the object

u1 and u2 are the initial velocities

v1 and v2 are the final velocities

Given

m1 = 300g  = 0.3kg

u1 = 1.10m/s

m2 = 4.00kg

u2 = 0m/s (at rest)

v1 = 0.890

v2 = ?

Substitute the given values into the formula;

0.3(1.10) + 0 = 0.3(0.89) + 4v2

0.33 = 0.267 + 4v2

0.33-0.267 = 4v2

0.063 = 4v2

v2 = 0.063/4

v2 = 0.0158m/s

Hence the speed of the large cart after the collision is 0.0158m/s

The speed of the large cart will be "0.0158 m/s".

According to the question:

Mass,

[tex]m_1 = 300 \ g = 0.3 \ kg[/tex][tex]m_2 = 4.00 \ kg[/tex]

Final velocity,

[tex]u_1 = 1.10 \ m/s[/tex][tex]u_2 = 0 \ m/s[/tex]

Initial velocity,

[tex]v_1 = 0.890 \ m/s[/tex][tex]v_2 = \ ?[/tex]

By using the law of conservation, we get

→ [tex]m_1 u_1 +m_2 u_2 =m_1 v_1 +m_2 v_1[/tex]

By substituting the values, we get

→ [tex]0.3(1.10)+0 = 0.3(0.89)+4v_2[/tex]

→              [tex]0.33=0.267+4 v_2[/tex]

   [tex]0.33-0.267 = 4 v_2[/tex]

              [tex]0.063 =4v_2[/tex]

                   [tex]v_2 = \frac{0.063}{4}[/tex]

                       [tex]= 0.0158 \ m/s[/tex]

Thus the response above is appropriate.

Learn more about speed here:

https://brainly.com/question/14478313

which is NOT true of the Big Bang Theory?
1. it explains what’s happening in the universe now
2. it explains what caused the big bang.
3. it explains what the universe was like in the beginning
4. it stages that the universe is expanding

Answers

Answer:

1. it explains what's happening im the universe now

A cross-country skier travels 40 meters north in 2 minutes. What is the skiers velocity?

Answers

Answer:

v = 0.33 [m/s]

Explanation:

We must remember that speed is defined as the relationship between the displacement in a given time. In this way, we can propose the following equation.

[tex]v=d/t[/tex]

where:

v = velocity [m/s]

d = displacement = 40 [m]

t = 2 [min] = 120 [s]

Now replacing we have:

[tex]v=40/120\\v=0.33[m/s][/tex]

PLEASE HELP! what kind of electricity does electrical heat burners make

Answers

Answer:

Electrical to Thermal

electric energy to thermal energy ( im late lol )

How large a net force is required to accelerate a 1,586-kg SUV from rest to a speed of 10.4 m/s in a distance of 212 m?

Answers

Answer:

F = 404.6 N

Explanation:

Mechanical Force

According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:

F = m.a

Where a is the acceleration of the object.

On the other hand, the equations of the Kinematics describe the motion of the object by the equation:

[tex]v_f=v_o+a.t[/tex]

Where:

vf is the final speed

vo is the initial speed

a is the acceleration

t is the time

Another useful equation for speeds and distance X is:

[tex]V_f^2=V_o^2+2aX[/tex]

To calculate the acceleration, we solve for a:

[tex]\displaystyle a=\frac{V_f^2-V_o^2}{2X}[/tex]

The SUV starts from rest (vo=0) to vf=10.4 m/s traveling a distance of X=211 m, thus the acceleration is:

[tex]\displaystyle a=\frac{10.4^2-0^2}{2(212)}[/tex]

[tex]\displaystyle a=\frac{108.16}{424}[/tex]

[tex]a=0.26 \ m/s^2[/tex]

The force needed to accelerate the SUV of mass m=1,586 Kg is:

F = 1,586*0.26

F = 404.6 N

In a step-down transformer the secondary coil is made of thick copper coil.
Explain
(2 marks)​

Answers

Answer:

In a step-up transformer, the secondary coil is made of same wire as the primary coil but it is rolled with the presence of the insulated which never conduct the opposite current to the coil.

Hence it function property without meeting any fire and other problem.

Even if you want to get clear ideas, then you have to go with official website.

When a transformer is in operation, there are ac currents in primary and secondary coils. ... This is the most important for the high current winding (the secondary coil of a step-down transformer). Thick copper wire is used for this winding, because thick wire of low resistivity has a low resistance.

Find the total charge of a system consists 2X10^4 electrons.

Answers

ANSWER: The first thing to learn is how to convert numbers back and forth between scientific notation and ordinary decimal notation. The expression "10n", where n is a whole number, simply means "10 raised to the nth power," or in other words, a number gotten by using 10 as a factor n times:

105 = 10 x 10 x 10 x 10 x 10 = 100,000 (5 zeros)

108 = 10 x 10 x 10 x 10 x 10 x 10 x 10 x 10 = 100,000,000 (8 zeros)

Notice that the number of zeros in the ordinary decimal expression is exactly equal to the power to which 10 is raised.

If the number is expressed in words, first write it down as an ordinary decimal number and then convert. Thus, "ten million" becomes 10,000,000. There are seven zeros, so in powers of ten notation ten million is written 107.

A number which is some power of 1/10 can also be expressed easily in scientific notation. By definition,

1/10 = 10-1     ("ten to the minus one power")

More generally, the expression "10-n" (where n is a whole number) means ( 1/10 )n. Thus

10-3 = ( 1 / 10 )3 = 1 / ( 10 x 10 x 10) = 1/1000

10-8 = ( 1 / 10 )8 = 1/100,000,000

Scientific notation was invented to help scientists (and science students!)deal with very large and very small numbers, without getting lost in all the zeros. Now answer the following on a separate sheet of paper and check your answers by clicking on "Answers":

Explanation:

800 because 10x10x10x10 equals 400 and 400x2 equals800

B. How does potential energy change when
mass is increased?

Answers

Answer:

with the increase in mass of the object , the force of gravitation increases that eventually increases the potential energy if the object is still fixed in its relative position with surrounding objects.

Explanation:

hopes this will help you

what would the net force be on the box in the problems shown below.( both force and direction).​ for all four diagrams. please explain answers.​

Answers


Answer:
A) object moves 20 N [West] or -20 N [East]
B) object moves 6 N [South] or -6 N [North]
C) object moves 90 N [West] or -90 N [East]
D) object does not move and is at rest*

*Rest means 0


Why:

A)both forces from north and south that are pushing against the object neutralize each other. Assume that north is positive and south is negative: 20 [N] + (-20) [S] = 0
On West and east, you can see that west has a greater force. Assume that west is negative and east is positive: 50 [E] + (-70) [W] = -20 [E]

help please Derive an equation
Ta=1.44T1/2​

Answers

Answer:

To derive an equation you must indicate the variable you want to solve for.Here we have tension of an object A and Tension 1.Two variables or unknown are given hence we cannot derive any other equations.

What power does a toaster with 15 A of current and 20 Ωof resistance consume?

Answers

Answer:

4500W

Explanation:

[tex]P = {I}^{2} R[/tex]

where P = Power consumed , I = Current & R = Resistance.

In the question it's given that

I = 15A ; R = 20Ω

So ,

[tex]P = {15}^{2}\times 20 = 225 \times 20 = 4500W[/tex]

4500w is the answer to this question

What is the resistance of a wire with "p" of .25, a length "L" of 11.2, and an area "A" of 1.26?

Answers

Answer:

Resistance = 2.2 Ohms.

Explanation:

Given the following data;

Resistivity, P = 0.25

Length, L = 11.2

Area, A = 1.26

To find the resistance.

Resistance is given by the formula below;

Resistance = PL/A

Substituting into the equation, we have;

Resistance = (0.25*11.2)1.26

Resistance = 2.8/1.26

Resistance = 2.2 Ohms.

Therefore, the resistance of the wire is 2.2 Ohms.

Explain how a fish is able to enjoy 180° field of view when in a pond.

Answers

Answer:

Time

An explanation of basic pond measurements that are vital to basic pond management practices.

Save For Later Print

Pond Measurements: Area, Volume and Residence Time - Articles UPDATED: OCTOBER 29, 2015

Pond Measurements: Area, Volume and Residence Time

The importance of getting an accurate estimation of your pond surface area cannot be overestimated. The majority of pond owners visually estimate their pond area, which usually results in an overestimate of the true pond surface area. Pond area and water volume should be calculated based on some simple measurements. The effort necessary to estimate pond surface area is directly related to your pond's shape and uniformity. The simplest method--using basic equations for common shapes--can be applied if your pond closely resembles a circle, square, rectangle, or trapezoid in shape.

Pond Shapes

Circular

pond shape can be estimated by measuring the distance around the pond shoreline in feet. Square the shoreline distance and divide by 547,390 to get the pond area in acres. For example, a pond that is 450 feet around the shoreline would have an area = (450 feet)2 / 547,390 or 0.37 acres.

Explanation:

i looked this up

list at least three examples of circular motion​

Answers

Answer:

When an object moves with a constant speed in a circular path, then its motion is called as Circular motion.

Examples of Uniform Circular Motion :--

The moon moves in uniform circular motion around the earth.

A stoned tied to a thread and rotated in circular motion.

An athlete running on a circular track.

A satellite revolving around Earth.

Other Questions
How do me I do the grammer spell me do I can do the spell not can I spell word like not me is the good a spelling cant me do need help how do I you me does me the spell pneumonoultramicroscopicsilicovolcanoconiosis The shape shown consists of three sides of a rectangle together with a semicircle. Which of the following isclosest to the perimeter of the shape? (The dashed line is not a part of the perimeter.(1) 56.1(2) 44.6(3) 38.3(4) 32.5 What is the primary reason U.S. citizens pay income taxes? What is the solution to the equation x + 14 = 63? (Input a whole number only.) (3 points) Select the correct answer.Marla plans to buy around 40 books of different genres for her library. However, she realizes that with her tight budget, she can only afford tobuy 25 books. What Is the scarce resource in this scenario?staffOB. booksOC moneyOD. spaceResetNextD Edmentum All rghts reserved 5Select the correct answer.Which behavior is most likely to lead to depression?.Cherie sleeps 4-5 hours every night for the last few months.O B.Manuel jogs for 30 minutes every day.O C.Dan neglects his personal hygiene regularly.OD.Liam faithfully spends four hours a day studying for his exams. Of(x) = 4x 2+ 7x1) f(8) =2) f(-5) = 3) f(0) = Why was the U.S. annexation of Hawaii delayed until William McKinley became President?McKinleys predecessor, Grover Cleveland, refused to sign the treaty of annexation.Supporters of the nationalist cause were in the majority in Hawaii until 1898.The Senate did not approve the treaty of annexation until McKinley entered the White House. Help! really fast pls Find the errors and identify them 1. (x) (Ew) (y) (Abaxwy v (Ez) Bzzxy) p 2. ~Abaawc p 3. (Ew) (y) (Abaawy v (Ez) Bzzxy) UI, 1 4. (y) (Abaawy v (Ez) Bzzxy) EI, 3 5. Abaawc v (Ez) Bzzxy UI, 4 6. (Ez) Bzzxy DS 2,5 7. Byyxy EI, 6 8. (x) Byyxy UG, 7 9. (x) Byyxy v ~Axxaabb ADD 8 10. (Ez) ( (x) Byyzy v ~ Azzaabb) EG, 9 g clout chaser dont use beauty for hype What is the most widely accepted theory as to how our Universe formed? What are four kind of sound devices Take a look at the painting below. What do you think can be understood about Mayan beliefs or their lifestyle from this mural? Explain. 1. The total cost of 3 cups of hot chocolate is $8.25. Assume the total costof hot chocolate y varies directly with the number of hot chocolateordered x. What is the cost of one hot chocolate? *O A. $0.36O B. $8.25O C. $2.75O D. $3.00 What part of the Constitution outlines executive powers?A. PreambleB. Article IC. Article IID. Article III X + (-4) = -2 What does X repesents??? Please help Make h the subject of the formula x = 5h + 8 How many moles of O2 are needed to reactwith 24 moles of C2H6?2C2H6 + 702 4CO2 + 6H20 write an Expository Essay on Why does a positive attitude helps a person be successful? font 14 1 page this is alot of points please do it right f