What’s the frequency of radiation that has a wavelength of 13 um, about the size of bacterium?

Answer:

We can say that we need 171 g barium hydroxide needed to make one model equals solution.

Explanation:

I hope this answered your question.

171 gram of  Ba(OH)2, in grams, is needed to make a 1.00 m aqueous solution.

Mass is the quantity of matter. The mass is calculated by the density divide by the volume.

In 1.00 solution, the mass of Ba(OH)2 is 171 gram.

Thus, the mass of Ba(OH)2 is 171 gram.

Learn more about mass

https://brainly.com/question/19694949

#SPJ2

Answer:

Diamond is covalently bonded and has a giant covalent structure. Covalent bonds require lots of energy to break as they are strong so diamond has the highest melting point. Iodine has only weak intermolecular forces (instantaneous dipole-dipole interactions or London forces) whereas hydrogen fluoride has a permanent dipole and can hydrogen bond (as well as having London forces).

Explanation:

hope to help

Answer:

C6H5S^-

Explanation:

This is because you are removing the hydrogen to make it a conjugate base.

The formula for conjugate base of C6H5SH is C6H5S⁻.

Conjugate base is defined as the substance which is formed when an acid liberate its protons.

The acid donate protons and the acid changes into base.

Conjugate acid is defined as the pair of compound that differs by its protons by gaining protons.

Conjugate acid and base are based in acid base theory.

Thus, the formula for conjugate base of C6H5SH is C6H5S⁻.

To learn more about conjugate base, refer to the link below:

https://brainly.com/question/12883745

#SPJ2

Answer:

Answer: Change in speed = 11 m/sTime taken = 3.4sHence, acceleration = (11/3.4) m/s² = 3.235 m/s²

Explanation:

(winks and runs off)

Acceleration is 3.235 m/s² when Usain Bolt went from 0.0 to 11.0 m/s in 3.4 seconds.

Acceleration is defined as a rate at which the velocity changes with time with respect to both speed and direction.An object is said to be accelerated if it's speeds up r slows down.

Motion along a circle is always accelerated even when speed is constant it's direction is continuously changing.Acceleration is a vector quantity as it has both magnitude as well as direction.The magnitude of acceleration is described by Newton's second law of motion.

Formula of acceleration is change in speed /time.Substituting the given values in the given formula,(11.0-0.0)/3.4=3.235 m/s².

Thus, the acceleration  is 3.235 m/s² when Usain Bolt went from 0.0 to 11.0 m/s in 3.4 seconds.

Learn more about acceleration,here:

https://brainly.com/question/12550364

#SPJ2

Answer:

respiration and photosynthesis

Explanation:

The percentages of carbon dioxide and oxygen in Earth's atmosphere are maintained most directly by cellular respiration and photosynthesis.

Photosynthesis simply refers to a biological and chemical process through which green plants convert light energy derived from the Sun into chemical energy, so as to make their food while using carbon dioxide (CO₂) and releasing oxygen.

On the other hand, cellular respiration is a series of metabolic reactions that occur in living cells and it involves the use of oxygen that are typically produced by green plants (autotrophs) during photosynthesis.

This ultimately implies that, the percentages of carbon dioxide (1%) and oxygen (20%) that are contained in Earth's atmosphere are maintained most directly by cellular respiration and photosynthesis.

Read more on photosynthesis here: brainly.com/question/3529377

sure i can help

so u have to ask someone else

In the first case, the molarity of oxygen gas is 0.0012 mol/L. In the second case, the molarity of oxygen gas is 0.0052 mol/L .

We have to obtain the number of moles of oxygen as follows;

P = 1.00 atm

V = 28.31 mL or 0.02831 L

n = ?

R = 0.082 atm LK-1mol-1

T = 25 °C + 273 = 298 K

n = PV/RT

n=  1.00 atm × 0.02831 L/ 0.082 atm LK-1mol-1 ×  298 K

n = 0.0012 moles

Molarity = Number of moles/Volume = 0.0012 moles/1.00 L =  0.0012 mol/L

For the second case;

P = 4.47 atm

V = 28.31 mL or 0.02831 L

n = ?

R =  0.082 atm LK-1mol-1

T = 25 °C + 273 = 298 K

n = PV/RT

n = 4.47 atm ×  0.02831 L/0.082 atm LK-1mol-1 × 298 K

n = 0.1265/24.436

n = 0.0052 moles

Molarity of oxygen = 0.0052 moles/1.00 L = 0.0052 mol/L

Learn more: https://brainly.com/question/2510654

The predicted concentration of IO₃⁻ needed to start the precipitation titration is 1.703 × 10⁻⁷ M

The dissociation of zinc (II) iodate can be expressed as:

[tex]\mathbf{Zn (IO_3)_2 \to Zn^{2+} + 2IO_3^-}[/tex]

Given that the solubility product constant Ksp value = 3.9 × 10⁻⁶

For the above dissociation,

[tex]\mathbf{Ksp = [Zn^{2+ }] [IO_3^-]^2}[/tex]

Since [tex]\mathbf{ [Zn^{2+ }] = [Zn(NO_3)_2] = 0.229 \ M}[/tex]

∴

[tex]\mathbf{3.9\times 10^{-8} =(0.229) \times [IO_3^-]^2}[/tex]

[tex]\mathbf{ [IO_3^-]^2 = \dfrac{3.9\times 10^{-8} }{(0.229)}}[/tex]

[tex]\mathbf{ [IO_3^-]^2 = 1.703 \times 10^{-7} \ M}[/tex]

Therefore, we can conclude that the initial predicted concentration of IO₃⁻ needed to start the precipitation titration is 1.703 × 10⁻⁷ M

Learn more about solubility product constant here:

https://brainly.com/question/17274813?referrer=searchResults

Answer:

[tex]\boxed {\boxed {\sf 1.6 \times 10^{24} \ atoms \ Si}}[/tex]

Explanation:

We are asked to find how many atoms are in a sample of 75 grams of silicon.

First, we must convert grams to moles using the molar mass. This is the mass of 1 mole of a substance. The molar mass is found on the Periodic Table because it is equal to the atomic mass, but the units are grams per mole instead of atomic mass units.

Look up the molar mass of silicon.

We convert using dimensional analysis, so we must set up a conversion factor.

[tex]\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

We are converting 75 grams of silicon to moles, so we multiply by this value.

[tex]75 \ g \ Si*\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

Flip the conversion factor so the units of grams of silicon cancel.

[tex]75 \ g \ Si*\frac {1 \ mol \ Si}{28.085 \ g \ Si}[/tex]

[tex]75 *\frac {1 \ mol \ Si}{28.085 }[/tex]

[tex]\frac {75}{28.085} \ mol \ Si[/tex]

[tex]2.670464661 \ mol \ Si[/tex]

Next, we convert moles to atoms using Avogadro's Number, or 6.022 ×10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this problem, the particles are atoms of silicon.

Set up another conversion factor, this time with Avogadro's Number.

[tex]\frac {6.022 \times 10^{23} \ atoms \ Si}{1 \ mol \ Si}[/tex]

Multiply by the number of moles we found.

[tex]2.670464661 \ mol \ Si*\frac {6.022 \times 10^{23} \ atoms \ Si}{1 \ mol \ Si}[/tex]

The units of moles of silicon cancel.

[tex]2.670464661 *\frac {6.022 \times 10^{23} \ atoms \ Si}{1 }[/tex]

[tex]2.670464661 * {6.022 \times 10^{23} \ atoms \ Si}[/tex]

[tex]1.60815382 \times 10^{24} \ atoms \ Si[/tex]

The original value of grams (75) has 2 significant figures, so our answer must have the same. For the number we found, that is the tenths place. The 0 in the hundredths place tells us to leave the 6 in the tenths place.

[tex]1.6 \times 10^{24} \ atoms \ Si[/tex]

Answer:

5.627 × 1019 milliliters

Explanation:

is this what you wanted?

Answer:

B) Ivory

Explanation:

Ivory is a hard, white material from the tusks and teeth of animals, that consists mainly of dentine, one of the physical structures of teeth and tusks.

Platinum, Silver, and Gold are precious metals, meaning they are rare metallic chemical elements of high economic value, shiny, hard, strong with high melting points

Ivory is regarded as the least of the options. Ivory consists of dentine and

are usually found in the tusks and teeth of animals such as elephants. They

however don't have much value as the other metals in the options.

Precious metals  include the following:

They are used for ornamental purposes. They are usually mined and refined

to produce a variety of objects.

Their use are however legal and they are expensive which makes the Ivory

the least out of the options provided.

Read more about Precious metals here https://brainly.com/question/1336406

Answer:

it allow us to compare the amount of energy passing through each tropical level over a period of time

Answer:

78.125ml

Explanation:

Number of moles in 250ml of 2.5M KCl is (250÷1000)litres×2.5M so we divide these moles by 8M. The answer gotten will be in litres so multiply by 1000 to get it in ml

Answer:

LICL as an Ionic compounds has covalent ability and they are soluble in polar solvent such as CH3COCH3 but they are insoluble in non-polar solvents. Due to their polarity, CH3COCH3 will decreases the electrostatic forces of attraction thereby resulting in free ions in aqueous solution.

Water is the known as a polar solvent that can dissolve an ionic compounds very easy and as a polar solvent, the arrangement of oxygen and hydrogen atoms in water is in bent shape.

Ionic compounds like LICL that is very polar is soluble in the polar solvent water.

Polar solvents like CH3COCH3 will dissolve polar and ionic solutes because of the attraction of the opposite charges on the solvent and solute particles.

Learn more from

https://brainly.com/question/25422160

Explanation:

Answer:

There are 95 atoms in mercury phosphate

Explanation:

You just add the atomic number for both elements

Answer:

reaction is NaHCO3 + HCL = H2CO3 + NaCl

the ratios are 1:1  

the 8 moles of HCl are in excess

so if you use 4 moles of NaHCO3 then you will obtain 4 moles of carbonic acid

hope that helps

Explanation:

Answer:

Calculate the freezing point of a solution of 3.46 g of a compound,X,in 160 g of benzene. When separate sample of X was vaporised, its density was found 3.27 g/L at 116 c and 773 torr. The freezing point of pure benzen is 5.45 c, and kf is 5 .12 c/m.

Explanation:

First determine molar mass from

P*molar mass = density*R*T

Solve for molar mass. Then

moles = grams/molar mass

Solve for moles

molality = moles/kg solvent

Solve for molality

delta T = Kf*m

Solve for delta T, then convert to freezing point

The back torn of Camel is important because it acts as a storage facility for

fats.

Camels are found in desert regions where there is scarcity of

This makes the food it eats to get stored at the back in the hump

region as fats so as to enable it survive long periods of unavailability of food.

The fats are gradually metabolized into nutrients which is used by the body

cells to ensure adequate energy availability and optimal survival.

Read more about Camels here https://brainly.com/question/24478294

I think u asked for the atoms of sulfur? its 4..

Explanation:

calcium = 4

sulfur = 4

oxygen = 4

I hope this is correct

Answer: 3.2 [D]

Explanation:

Use Boyles law

(Might want to rotate image, sorry!)

Answer:

It is the one that has start and finish and a compass on it...I am sorry I can share images for some reason. And underneath the compass, it says 1.0 Mile. It also has a compass in the bottom right-hand corner.

Explanation:

I just took the quiz and got it correct!

Answer:

same question

Explanation:

Answer:

arrow down is gravity

Explanation:

Answer: The person above me is right

Explanation:

Have a Great day!

Answer:

C. Both depend on how much matter an object has.

Explanation:

weight is the gravitational force acting on an object, so it does vary depending on gravity.

Hope it help and if it its correct please give brainliest  

Stay Safe And Heal thy

Thank You

Answer:

A

Explanation:

Conducts electricity:

-Steel

-Gold

-Copper

-Aluminum

Does not conduct electricity:

-Plastic

-Glass

-Rubber

-Wood

Metallic bonding causes metals to conduct electricity. Some metals are more highly conductive than others.

Hope this helps :)

Answer:

The first table correctly classifies the materials.

Explanation:

In table 1, all the elements on the left side are transition metals, expect for steel. Steel is not an element, it's an alloy (Which is a combination of two or more elements).Transition metals are very good conductors of heat and electricity. The reason why transition metals make such good conductors is because their outer electrons can move freely in their atom.

The right side of table 1 correctly classifies the materials that do not conduct electricity. The reason why those materials are poor conductors is because they all have their electrons tightly bound to their atoms.

In table 2, it classifies copper has a poor conductor which is wrong. It also classifies wood as a good conductor which also wrong for the reasons I stated above.

[tex] \: \: \: \: [/tex]

[tex] \: \: \: \: \: \: \: [/tex]

Answer:

We can say that we need 171 g barium hydroxide needed to make one model equals solution.

Explanation:

I hope this answered your question.