What's the area of the following triangle?

A. 24 ft.²

B. 128 ft.²

C. 12 ft.²

D. 64 ft.²

What's The Area Of The Following Triangle?A. 24 Ft.B. 128 Ft.C. 12 Ft.D. 64 Ft.

Answers

Answer 1

Answer:

D

Step-by-step explanation:

the area (A) of a triangle is calculated as

A = [tex]\frac{1}{2}[/tex] bh ( b is the base and h the perpendicular height )

here b = 16 and h = 8 , then

A = [tex]\frac{1}{2}[/tex] × 16 × 8 = 8 × 8 = 64 ft²


Related Questions

A building contractor is building a backyard playground and wishes to put down rubber mulch to provide safety from falls. The contractor wishes to put the mulch in a pit in the shape of a rectangular solid 24 feet​ long, 13 feet​ wide, and 6 inches deep.

a) Determine the​ volume, in cubic​ feet, of mulch the contractor will need.
​b) If mulch costs 9​$ per cubic​ foot, what will the cost of mulch​ be?

Answers

Answer:

A= 220.5ft

B= $2425.5

Step-by-step explanation:

A= 220.5ft

B= $2425.5

Does the mapping diagram represent a function? Why or why not?
-5
8
9
y
-8
A. Yes; each input pairs with only one output.
B. No; the input value x = -5 pairs with two output values.
C. No; each input pairs with only one output.
D. No; each output value pairs with two input values.

Answers

The correct answer is:  A. Yes; each input pairs with only one output.

To determine whether the given mapping diagram represents a function, we need to analyze the relationship between the input values (x) and the corresponding output values (y).

Looking at the mapping diagram, we can see that the input value -5 is paired with the output value 8. This implies that when x = -5, the corresponding y value is 8. Similarly, when x = 9, the corresponding y value is -8.

Since each input value has a unique and specific output value, we can conclude that the mapping diagram represents a function. In other words, for every input value, there is only one output value associated with it.

This is consistent with the definition of a function, where each input has a single and distinct output. Therefore, the mapping diagram satisfies the criteria for a function, and the correct answer is:

A. Yes; each input pairs with only one output.

For more questions on output

https://brainly.com/question/30724559

#SPJ8

The mapping diagram does not represent a function that reflects this is: No; each output value pairs with two input values. D.

To determine whether the mapping diagram represents a function, we need to assess whether each input value pairs with only one output value.

Looking at the given mapping diagram:

-5 -> 8

9 -> y

-8 -> y

We can see that the input value -5 maps to the output value 8.

There are two different input values, 9 and -8, that map to the same output value, y.

In a function, each input should correspond to exactly one output, but in this case, the output value y is associated with two different input values.

In this case, y, the output value, pairs with both 9 and -8, indicating that the diagram does not meet the criteria for a function.

We must examine if each input value couples with only one output value in order to evaluate whether the mapping diagram reflects a function.

Observing the provided mapping diagram:

-5 -> 8 9 -> y -8 -> y

As can be seen, the input value of -5 corresponds to the output value of 8.

The identical output value, y, is mapped to two distinct input values, 9 and -8.

A function should have only one output for each input, however in this situation, the output value y is connected to two separate input values.

This figure does not fit the definition of a function because the output value, y, couples with both 9 and -8.

For similar questions mapping diagram

https://brainly.com/question/28658986

#SPJ8

Please answer ASAP I will brainlist

Answers

The solution to the system is (a) a = 4/5, b = 5, c = -4 and d =-4

How to determine the solution to the system

From the question, we have the following parameters that can be used in our computation:

The augmented matrix

Where, we have

[tex]\left[\begin{array}{cccc|c}1&0&0&0&4/5\\0&1&0&0&5\\0&0&1&0&-4\\0&0&0&1&-4\end{array}\right][/tex]

From the above, we have the diagonals to be 1

And other elements to be 0

This means that the equation has been solved

So, we have

a = 4/5, b = 5, c = -4 and d =-4

Read more about matrix at

https://brainly.com/question/11989522

#SPJ1

A company has recently been hiring new employees. Today the company has 32% more employees than it did a year ago. If there are currently 69,300 employees, how many employees did the company have a year ago?​

Answers

Answer:

52500

Step-by-step explanation:

Let there be x employees in the previous year

Now, the company has 32% more employees whis is 69300

i.e.

[tex]x + \frac{32}{100} x = 69300\\\\ \implies\frac{132x}{100} = 69300 \\\\\implies 132x = 6930000\\\\\implies x = \frac{6930000}{132}\\[/tex]

⇒ x = 52500

There were 52500 employees in the previous year

Can anyone help me solving this question I forgot how to solve it it’s important

Answers

The statement that is correct about the dot plots is that:

A) The distribution for Class M is approximately symmetric

How to identify symmetric distribution?

A symmetric distribution in dot plots is defined as a distribution with a vertical line of symmetry in the center of the graphical representation, so that the mean is equal to the median.

A symmetric distribution is one that occurs when the values ​​of a variable occur at regular frequencies, and often the mean, median, and mode all occur at the same point. If we draw a line through the middle of the chart, we can see that the two planes mirror each other.  

Now, from the given two dot plots of class M and Class N, it is very clear that class M is very close to being symmetric about the data value 3.

Read more about Symmetric Distribution at: https://brainly.com/question/31851902

#SPJ1

Write the correct measurement for A-F (Example 2.2, 5.9, 9)

Answers

Answer:

9

Step-by-step explanation:

Find the volume of this cylinder give your answer to one decimal place 11height 14 Length

Answers

To find the volume of the given cylinder, we need to use the formula of volume of a cylinder which is given by V = πr²h, where V is the volume of the cylinder, r is the radius of the cylinder and h is the height of the cylinder. So, the volume is 1078.1 cubic units.

Given, Length = 14 units, Height = 11 units. Now, we know that the formula for the volume of a cylinder is given as; V = πr²h.

Here, the radius of the cylinder is half the length of the cylinder, which is; Radius = Length/2

Radius = 14/2

Radius = 7 units

Substituting the value of the radius and height, we have; V = π(7)²(11)

V = 1078.1 cubic units. Therefore, the volume of the cylinder is 1078.1 cubic units. Rounded off to one decimal place, the volume is 1078.1 cubic units.

For more questions on: volume of the cylinder

https://brainly.com/question/27535498

#SPJ8      

a spinner with 10 equally sized slices 4 yellow, 4 red, 2 blue. probability that the dial stops on yellow?

Answers

The probability that the dial stops on yellow is 2/5 or 0.4 (or 40%).

Therefore, there is a 40% chance that the spinner will stop on yellow.

To find the probability that the spinner stops on yellow, we need to determine the number of favorable outcomes (yellow) and the total number of possible outcomes.

The spinner has 10 equally sized slices, with 4 yellow, 4 red, and 2 blue.

The number of favorable outcomes (yellow) is 4 because there are 4 yellow slices.

The total number of possible outcomes is 10 because there are 10 slices in total.

Therefore, the probability of the spinner stopping on yellow can be calculated as:

Probability = Number of favorable outcomes / Total number of possible outcomes

Probability = 4 / 10

Simplifying this fraction, we get:

Probability = 2 / 5

So, the probability that the dial stops on yellow is 2/5 or 0.4 (or 40%).

Therefore, there is a 40% chance that the spinner will stop on yellow.

for such more question on probability

https://brainly.com/question/27342429

#SPJ8

This table shows the number of customers who have come in to Trent’s Hobby Shop each day since he opened the doors.

A 2-column table with 4 rows. Column 1 is labeled Number of Days Open with entries 1, 2, 3, 4. Column 2 is labeled Number of customers with entries 3, 11, 24, 30.

Is this function discrete or continuous?

Answers

Answer:

a

Step-by-step explanation:

The function is discrete because the output and the input is assumed as only integer values.

•Discrete variable are countable kind of numbers like 1,2,3 and are represented by whole numbers or integers if it can be negative.
•Continuous variables can be decimals and they are represented by rational numbers.

What is the next value?
2 3 E 4 5 I 6 8
options: O 8 M N

Answers

Answer:

The correct answer is a.

Step-by-step explanation:

The sequence is: 2 3 E 4 5 I 6 8 We can notice that there are numbers and letters alternating in the sequence. The numbers are increasing, and the letters seem to be vowels in alphabetical order. So, the next value should be a letter (vowel) after I, which is O. The correct answer is a.


y = 1/3x -1

x-intercept (3,0)

How did they get this answer? Somebody please help

Answers

The x-intercept of a line is the point where the line crosses the x-axis, which means that the y-coordinate of the point is zero. To find the x-intercept of the line y = (1/3)x - 1, we need to substitute y with zero and solve for x.

Here's how to do it:

Substitute y with zero:
0 = (1/3)x - 1

Add 1 to both sides:
1 = (1/3)x

Multiply both sides by 3:
3 = x

So the x-intercept of the line y = (1/3)x - 1 is (3,0). This means that the line crosses the x-axis at the point (3,0).

In conclusion, the x-intercept of the line y = (1/3)x - 1 is (3,0), which means that the line crosses the x-axis at the point (3,0).

Answer:

Step-by-step explanation:

x-intercept is where the line cuts the x-axis. That is, when y=0.

Substitute y=0 and we get:

       [tex]0=\frac{1}{3} x-1[/tex]

       [tex]1=\frac{1}{3} x[/tex]

       [tex]x=3[/tex]

So x-intercept is the point (3,0).

(|7 − 3 x 5) | ÷ 4)³ + √64

Answers

Answer:

16

Step-by-step explanation:

(|7 − 3 x 5| ÷ 4)³ + √64

(|7 − 3 x 5| ÷ 4)³ + √64

(|7 − 15| ÷ 4)³ + √64

(|7 − 15| ÷ 4)³ + √64

(8 ÷ 4)³ + √64

(8 ÷ 4)³ + √64

2³ + √64

8 + 8

16

Answer:

16

Step-by-step explanation:

To solve, use PEMDAS as it applies to the expression.

First, you must carry out what is in the parenthesis.

Multiply (3*5 = 15), then subtract (7 - 15 = -8). The two little vertical lines surrounding (7 - 3 x 5) mean absolute value. This means that you will write -8 as +8.

Continuing on in the parenthesis, carry out (8 ÷ 4 = 2).

Next, we must do exponents.

We see that everything in the parenthesis is being raised to the power of three (cubed). Since we've solved what was in the parenthesis, we simply need to carry out ([tex]2^{3}[/tex] = 8).

Now, we need to quickly carry out [tex]\sqrt{64}[/tex]. Square roots are just whatever number can be multiplied by itself to get, in this case, 64.

[tex]\sqrt{64} = 8[/tex].

Finally, we must add what remains.

8 + 8 = 16.

So, (|7 - 3 x 5) | ÷ [tex]4)^{3}[/tex] + [tex]\sqrt{64}[/tex] = 16.

Roger can run one mile in 9 minutes. Jeff can run one mile in 6 minutes. If Jeff gives Roger a 1 minute head start, how
long will it take before Jeff catches up to Roger? How far will each have run?
They each will have run of a mile.

Answers

It will take approximately 5.33 minutes for Jeff to catch up to Roger. Both Jeff and Roger will have run a distance of 1 mile.

Let's calculate the time it takes for Jeff to catch up to Roger and the distance each will have run.

First, we need to determine how much distance Roger covers during the 1-minute head start. Since Roger runs one mile in 9 minutes, in 1 minute, he would cover 1/9 of a mile.

Now, let's set up an equation to represent the time it takes for Jeff to catch up to Roger:

Distance covered by Jeff = Distance covered by Roger + Distance covered during the head start

Let's denote the time it takes for Jeff to catch up as t minutes. During this time, Jeff runs a distance of 1 mile, while Roger runs a distance of 1/9 of a mile (from the head start).

Distance covered by Jeff = Distance covered by Roger + Distance covered during the head start

1 mile = (1/9) mile + (6 minutes) × t × (1 mile/6 minutes)

Now, let's solve this equation to find the time it takes for Jeff to catch up:

1 = (1/9) + (1/6)t

Multiplying the equation by the least common multiple (LCM) of 9 and 6, which is 18, to clear the fractions:

18 = 2 + 3t

Subtracting 2 from both sides:

16 = 3t

Dividing by 3:

t = 16/3 = 5.33 minutes (rounded to two decimal places)

Therefore, it will take approximately 5.33 minutes for Jeff to catch up to Roger. Both Jeff and Roger will have run a distance of 1 mile.

for such more question on distance

https://brainly.com/question/12356021

#SPJ8

I dont understand these can someone help?

Answers

The corresponding sides and angles of the similar and congruent triangles indicates that we get the following approximate and exact values;

Page 1;

5. [tex]\overleftrightarrow{AC}[/tex] = 4.3. 6. [tex]\overline{BP}[/tex] ≈ 7.5 7. [tex]\overline{YV}[/tex] ≈ 8

Page 2

5. [tex]\overline{DF}[/tex] = [tex]11\frac{1}{4}[/tex], 6. [tex]\overline{ED}[/tex] = 5, 7. [tex]\overline{BC}[/tex] = 22, 8. [tex]\overline{EF}[/tex] = 8

Page 3;

8. m∠ABC = 30°, 9. m∠XYP = 44°, 10. [tex]\overline{AC}[/tex] = 14

What are congruent triangles?

Congruent triangles are triangles that have all three corresponding sides of the same length and all three angles of the same measure.

First Page

5. The distance from the vertex B to the line segment [tex]\overleftrightarrow{AC}[/tex] in the triangle ΔABC is the altitude of the triangle, which is 4.3

6. The distance from the vertex B to [tex]\overleftrightarrow{AC}[/tex] = [tex]\overline{BP}[/tex]

Pythagorean theorem indicates that the length of the segment [tex]\overline{BP}[/tex] can be found as follows;

[tex]\overline{BP}[/tex] = √(13.5² - 11.2²) ≈ 7.5

7. The distance from Y to  [tex]\overleftrightarrow{XZ}[/tex] is the altitude of the triangle ΔXYZ, which indicates;

The distance from Y to  [tex]\overleftrightarrow{XZ}[/tex] = [tex]\overline{YV}[/tex]

The Pythagorean theorem indicates that we get;

[tex]\overline{YV}[/tex] = √(13.34² - 10.67²) ≈ 8

Second page;

5. The scale factor from ΔABC to ΔDEF = 3/4

Therefore, the length of [tex]\overline{DF}[/tex] = (3/4) × 15 = 45/4 = [tex]11\frac{1}{4}[/tex]

6. The scale factor of (1/3) indicates that we get;

[tex]\overline{ED}[/tex] = (1/2) × 10 = 5

7. The ratio of the corresponding sides by length which is the scale factor is; S.F. = 18/9 = 10/5 = 2

The corresponding side to [tex]\overline{BC}[/tex] is [tex]\overline{EF}[/tex]

[tex]\overline{EF}[/tex] = 11, therefore, the length of [tex]\overline{BC}[/tex] = 2 × 11 = 22

8. The ratio of the corresponding sides by length which is the scale factor is; S.F. = 4/6 = 10/15 = 2/3

The corresponding side to [tex]\overline{EF}[/tex] is [tex]\overline{BC}[/tex]

[tex]\overline{BC}[/tex] = 12, therefore [tex]\overline{EF}[/tex] = (2/3) × 12 = 8

Third page;

8. The triangles ΔABV and ΔCVB are congruent triangles by the Leg Hypotenuse congruence theorem.

The angles ∠ABV and ∠CBV are corresponding triangles, therefore;

∠ABV ≅ ∠CBV

m∠CVB = m∠ABV = 15° (Definition of congruent triangles and symmetric and substitution property)

∠ABC = ∠ABV + ∠CBV

Therefore; m∠ABC = 15° + 15° = 30°

9. The angles ∠YXP and ∠YZP are right triangles, therefore;

m∠YXP = m∠YZP = 90°

The right triangles  ΔYXP and ΔYZP are congruent by the LH congruence theorem

∠XYP ≅ ∠ZYP (Corresponding Parts of Congruent Triangles are Congruent, CPCTC)

m∠XYP = m∠ZYP (Definition of congruent triangles)

m∠XYZ = m∠XYP + m∠ZYP (Angle addition property)

m∠XYZ = 2 × m∠XYP

2 × m∠XYP = m∠XYZ = 88°

m∠XYP = 88°/2 = 44°

10. The angles ∠ACP and ∠ABP are right angles, according to the indicated markings, therefore;

∠ACP ≅ ∠ABP (All right angles are congruent)

ΔACP ≅ ΔABP by SAA congruence theorem

[tex]\overline{AC}[/tex] ≅ [tex]\overline{AB}[/tex] (CPCTC)

[tex]\overline{AC}[/tex] = [tex]\overline{AB}[/tex] (Definition of congruent segments)

[tex]\overline{AC}[/tex] = [tex]\overline{AB}[/tex] = 14

Learn more on congruent triangles here: https://brainly.com/question/30642909

#SPJ1

6. For each final matrix, state the solution.


Please answer this picture

Answers

The solutions associated with the final matrices representing a system of linear equations are listed below:

First case: x = 3, y = 1, z = 8

Second case: No solution

Third case: No solution

What are the solutions contained in each final matrix?

In this problem we find three of final matrices, each of them representing a system of linear equations. There are two rules to be considered:

A system has no solution if there is a row with only zeroes in the dependent coefficients matrix.A system has a solution if there is a singular matrix, there is, the dependent coefficients matrix has only ones in the main diagonal and the rest of elements are zeroes.

Now we proceed to determine the solution associated with each matrix:

First matrix:

x = 3, y = 1, z = 8

Second matrix:

No solution

Third matrix:

No solution

To learn more on systems of linear equations: https://brainly.com/question/19549098

#SPJ1

Step-by-step explanation:

For the left matrix, since the matrix is already in reduced row form,

The solutions to the matrix is (3,-1,8)

For the middle matrix, we need to convert the -6 to a zero,

notice how in the third row, every entry except the last one is 0, this implies that

0=-2, which is not the case thus the middle matrix has no solution.

For the last one, notice that we have 3 colums but only two non zero rows, this means that this matrix has infinite solutions.

answer the question submitted

Answers

The function g(x) = 4x² - 28x + 49 can be rewritten as g(x) = 4(x - 7/2)² - 147 after completing the square.

To complete the square for the function g(x) = 4x² - 28x + 49, we follow these steps:

Step 1: Divide the coefficient of x by 2 and square the result.

  (Coefficient of x) / 2 = -28/2 = -14

  (-14)² = 196

Step 2: Add and subtract the value obtained in Step 1 inside the parentheses.

  g(x) = 4x² - 28x + 49

  = 4x² - 28x + 196 - 196 + 49

Step 3: Rearrange the terms and factor the perfect square trinomial.

  g(x) = (4x² - 28x + 196) - 196 + 49

  = 4(x² - 7x + 49) - 147

  = 4(x² - 7x + 49) - 147

Step 4: Write the perfect square trinomial as the square of a binomial.

  g(x) = 4(x - 7/2)² - 147

Therefore, the function g(x) = 4x² - 28x + 49 can be rewritten as g(x) = 4(x - 7/2)² - 147 after completing the square.

For more such questions square,click on

https://brainly.com/question/27307830

#SPJ8

The probable question may be:

Rewrite the function by completing the square.

g(x)=4x²-28x +49

g(x)= ____  (x+___ )²+____.

complete the table of values for y=3/x

Answers

The table of values for the equation y = 3/x can be completed as follows:

x | y

1 | 3/1 = 3

2 | 3/2 = 1.5

3 | 3/3 = 1

4 | 3/4 = 0.75

5 | 3/5 = 0.6

To complete the table of values for the equation y = 3/x, we substitute different values of x into the equation and calculate the corresponding values of y.

When x = 1:

Substitute x = 1 into the equation: y = 3/1 = 3

So, when x = 1, y = 3.

When x = 2:

Substitute x = 2 into the equation: y = 3/2 = 1.5

So, when x = 2, y = 1.5.

When x = 3:

Substitute x = 3 into the equation: y = 3/3 = 1

So, when x = 3, y = 1.

When x = 4:

Substitute x = 4 into the equation: y = 3/4 = 0.75

So, when x = 4, y = 0.75.

When x = 5:

Substitute x = 5 into the equation: y = 3/5 = 0.6

So, when x = 5, y = 0.6.

By substituting different values of x into the equation y = 3/x, we can complete the table of values as shown above.

Hence, the completed table of values for y = 3/x is:

x | y

1 | 3

2 | 1.5

3 | 1

4 | 0.75

5 | 0.6

For more such questions on table of values, click on:

https://brainly.com/question/12151322

#SPJ8

Let A be the point (7,4) and D be (-5, -3). What is the length of the shortest path ABCD, where B is a point (x, 2) and C is a point (x,0)? This path consists of three connected segments, with the middle one vertical.

Answers

The length of the shortest path ABCD is 7 units.

To find the length of the shortest path ABCD, we need to determine the coordinates of points B and C and then calculate the distances between these points.

Given that B has a y-coordinate of 2, it lies on a horizontal line. Therefore, the y-coordinate of B is 2, and the x-coordinate is the same as the x-coordinate of point A, which is 7. So, B is the point (7, 2).

Similarly, C lies on a vertical line, and its x-coordinate is the same as the x-coordinate of point D, which is -5. So, C is the point (-5, 0).

Now, we can calculate the distances between the points. The distance between A and B can be found using the distance formula:

AB = √[tex]((x2 - x1)^2 + (y2 - y1)^2[/tex])

Substituting the coordinates of A and B, we have:

AB = √[tex]((7 - 7)^2 + (2 - 4)^2) = √(0^2 + (-2)^2[/tex]) = √4 = 2

The distance between B and C is simply the difference in their y-coordinates:

BC = |y2 - y1| = |2 - 0| = 2

Finally, the distance between C and D can be calculated using the distance formula:

CD = √[tex]((-5 - (-5))^2 + (0 - (-3))^2)[/tex] = √[tex](0^2 + 3^2)[/tex] = √9 = 3

Therefore, the length of the shortest path ABCD is the sum of the distances AB, BC, and CD:

Shortest path ABCD = AB + BC + CD = 2 + 2 + 3 = 7

For more such questions on shortest path visit:

https://brainly.com/question/31911286

#SPJ8

If f(x) = 16x2, what is the value of f(2.5)?

Answers

Answer:

f(2.5) = 100

Step-by-step explanation:

to evaluate f(2.5) substitute x = 2.5 into f(x)

f(2.5) = 16(2.5)² = 16 × 6.25 = 100

Please help! :')

Prove that the two circles shown below are similar. (10 points)

Circle X is shown with a center at negative 2, 8 and a radius of 6. Circle Y is shown with a center of 4, 2 and a radius of 3.

Answers

To prove that two circles are similar, we need to show that they have the same shape. This means that the ratio of the radii of the two circles is the same as the ratio of their corresponding diameters 1.
In this case, Circle X has a center at (-2, 8) and a radius of 6. Circle Y has a center at (4, 2) and a radius of 3. To show that these two circles are similar, we need to show that the ratio of their radii is the same as the ratio of their corresponding diameters 1.
The distance between the centers of Circle X and Circle Y is:
d = sqrt((4 - (-2))^2 + (2 - 8)^2) = sqrt(6^2 + (-6)^2) = sqrt(72)
The ratio of the radii of Circle X and Circle Y is:
r1/r2 = 6/3 = 2
The ratio of their corresponding diameters is:
d1/d2 = (2 * r1)/(2 * r2) = r1/r2 = 2
Since the ratio of their radii is the same as the ratio of their corresponding diameters, we can conclude that Circle X and Circle Y are similar 1.

a 4-foot length of ribbon costs $1.32. how much will it cost to buy 10 yards of ribbon?

Answers

Answer:

$3.3

Step-by-step explanation:

4x = 1.32

x = 0.33$ / ft

10x = 10 * 0.33 = 3.3$

please help quick
Which of the following are solutions to the quadratic equation? Check all that
apply.

Answers

The correct solutions to the quadratic equation are:

c. -8

e. 2

To determine the solutions to the quadratic equation 2x^2 + 6x - 10 = x^2 + 6, we need to solve for x.

First, let's simplify the equation by combining like terms:

2x^2 + 6x - 10 - x^2 - 6 = 0

x^2 + 6x - 16 = 0

Now, we can solve this quadratic equation by factoring or by using the quadratic formula.

By factoring:

(x + 8)(x - 2) = 0

Setting each factor equal to zero, we get:

x + 8 = 0 --> x = -8

x - 2 = 0 --> x = 2

So, the solutions to the quadratic equation are x = -8 and x = 2.

Now, let's check the given options:

a. -2: This value is not a solution to the equation.

b. 1/3: This value is not a solution to the equation.

c. -8: This value is a solution to the equation.

d. -1/2: This value is not a solution to the equation.

e. 2: This value is a solution to the equation.

f. 8: This value is not a solution to the equation.

The following are the proper answers to the quadratic equation: c. -8 e.2

for such more question on quadratic equation

https://brainly.com/question/1214333

#SPJ8

Which table of values represents a function? Step by step.

Answers

Answer:

A

Step-by-step explanation:

For a table of values to be a function, all inputs must have one unique output. The only table that doesn't violate this is table A.

Notice that while two different inputs (-4 and 1) have the same output of 7, it is still a function because both outputs of 7 are associated with two different inputs.

Which of the following functions is graphed me below ?

Answers

Answer:

[tex]y = |x - 2| + 3[/tex]

The correct answer is C.

25 ÷ 5+7-(4 x 3) Solve the problem is fast as possible

Answers

Answer:

Step-by-step explanation:

0

Answer:

0

Step-by-step explanation:

25 ÷ 5+7-(4 x 3)

25 ÷ 5+7-(4 x 3)

5+7-(4 x 3)

5+7-(4 x 3)

5+7-12

12-12

0

I wrote in bold the steps you need to follow using PEMDAS (Parentheses, Exponents, Multiplication and Divison left to right, and Addition and Subtraction left to right).

Question #3
Solve for x
OOO
O 10
07
5
8
6x+8
N
p
U
K
122°
L
M
194°

Answers

The calculated value o x in the circle is 7

How to determine the solution for x

From the question, we have the following parameters that can be used in our computation:

The circle

The value of x can be calculated using teh equation of the intersection of chords

So, we have

122 = 1/2(6x + 8 + 194)

Evaluate

244 = 6x + 202

So, we have

6x = 42

Divide by 6

x = 7

Hence, the solution for x is 7

Read more about circles at

https://brainly.com/question/32192505

#SPJ1

Select the correct text.

Regina’s teacher recently gave her a homework assignment on solving equations. Since she has been thinking about saving for a new cell phone, she decided to use the assignment as an opportunity to model a savings plan.

She created this equation to model the situation. In it, y represents the total amount saved for the new cell phone, 74 is the amount of money she has now, 40 is the amount of money she saves each month for the phone, and x represents the number of months since she started saving a regular amount:

74 + 40x = y.

She then solved the equation to determine how many months she’d need to save to have enough to purchase the new cell phone. Review her work, and select the error.

Justification
1: given

2: subtraction property of equality

3: simplification

4: multiplication property of equality

5: simplification

6: substitution, y = 834

7: simplification

Step 1: 74 + 40x = y

Step 2: 74 + 40x − 74 = y − 74

Step 3: 40x = y − 74

Step 4:
=
Step 5: x =
Step 6: x =
Step 7: x = 19

Answers

The error in the given steps is Step 4:

Step 4:

This step is missing an operation. It should specify that the right-hand side should be multiplied by 40, just like the left-hand side:

40x = 40(y - 74)

Therefore, the correct step 4 should be:

40x = 40y - 296

The error is that the multiplication of 40 is not applied to both terms on the right-hand side.

Prove the following?

Answers

The given statement proposition is a that suggests that if x is an inductive element, defined in terms of the set X as described, then it follows that every non-zero natural number can be expressed as the successor of some other natural number.

The given statement is a logical proposition involving the concept of induction. Let's break it down and analyze its components.

"If x is inductive..."

This implies that x is a concept or object that possesses the property of being inductive. In mathematics, the term "inductive" typically refers to the property of being a natural number or belonging to the set of natural numbers.

"...then so is (x ∈ X : x = Ф or x = y ∪ {y} for some y)"

Here, we have a set X that consists of elements satisfying a certain condition. The condition states that an element x in X can either be equal to the empty set (Ф) or the union of a set y with itself ({y}). This construction represents a recursive definition, where each element in X is defined in terms of a base case (Ф) and a recursive step ({y}).

"...hence each n ≠ 0 is m + 1 for some m."

This conclusion states that for every natural number n that is not equal to 0, there exists another natural number m such that n can be expressed as m + 1. In other words, any non-zero natural number is the successor of some other natural number.

Overall, the given statement is a proposition that suggests that if x is an inductive element, defined in terms of the set X as described, then it follows that every non-zero natural number can be expressed as the successor of some other natural number.

for such more question on proposition

https://brainly.com/question/22008756

#SPJ8

write 718000 in standard form

Answers

Answer:

718000

Step-by-step explanation:

718000 is already in standard form

Suppose we have two equations and they are both equal to each other. Equation A is "y = x^2 - 9" and Equation B is "y = x + 3". If we had to solve this system of equations, what quadratic equation do we have to solve in order to get our x values?
a. x^2 - x - 12 = 0
b. x^2 + x + 3 = 0
c. x^2 - x - 6 = 0

Answers

Answer:

a) x² - x - 12 = 0

Step-by-step explanation:

We have equation A = equation B

⇒ x² - 9 = x + 3

⇒ x² - 9 - x - 3 = 0

⇒ x² - x - 12 = 0

Other Questions
Which substance will have the largest temperature change if the same amount of heat is added to each of them? Gold, Au(s): specific heat = 0. 0308 calories per gram degree Celsius. Water, H2O(l): specific heat = 1. 00 calorie per gram degree Celsius. Copper, Cu(s): specific heat = 0. 0920 calorie per gram degree Celsius. Ethanol, C2H5OH(l): specific heat = 0. 588 calorie per gram degree Celsius When recording drums, you need to isolate and amplify the sound picked up by themicrophone of the bass drum since this usually picks up the sound of the others as welldrums and cymbals of the battery itself. A system is required that amplifies andfilter the signal picked up by this microphone, where the RMS amplitude of the signalcaptured is 5mV. The output of this first system that you will design shouldamplify the signal captured by the microphone up to 46dB in the pass band,having a cutoff frequency equal to 200Hz with a roll-off of 80dB/dec. Theuseful frequency range of a bass drum is from 30Hz to 150Hz Determine the 1000(10+jw)(100+jw) (c) (10 pts.) Consider a linear time-invariant system with H(jw) = (jw) (100+jw) (800+jw)* VALUE of the Bode magnitude approximation in dB at w = 100(2) and the SLOPE of the Bode magnitude appr5c. a = 6 The Schrdinger equation for a simple harmonic oscillator is given by on = (or? B) where o2 = mx, B = 2mE and w= Vk/m The ground state wave function of the oscillator is given by 40(x) = (9)"4022/2 Show, by substituting this function in the oscillator equation, that the ground state of the oscillator is given by E = Eo = Hw Urban areas in Ghana face unprecedented challenges including rising income disparities and increased vulnerability to disaster and climate change impacts. Parts of the Tano region, for example, have been subjected to perennial flooding occasioned by, poor sanitation and drainage infrastructure, overcrowded spaces, and weak regulatory enforcement with respect to sanitation, drainage and waste management. To address these issues, the Government of Ghana in collaboration with the World Bank introduced the Ghana Flood and Disaster Management Project(GFDMP) in December 2020. The objective was to strengthen flood and solid waste management in the Tano region, particularly, in communities within the Tano River basin, improve the living conditions of the most vulnerable communities in the Tano basin and foster adaptation of the flood management infrastructure to climate change in the Tano Region. The Ministry of Flood and Disaster Management has put in place several interventions to improve on flood management and disaster prevention. These include acclimate-resilient drainage and flood mitigation measures, solid waste management capacity improvement, and participatory upgrade of targeted low-prone Low-Income Communities and emergency response units. Structural measures to mitigate flood impacts in the Tano River Basin would be developed, non-structural measures to improve flood warning and preparedness to be deployed, reduce the amount of solid waste flowing into the Tano channel, implement Community-based solid waste management interventions and community campaign and improve physical planning and coordination in the Tano River Basin.A total of US$45.25 million would be spent on the resilient drainage and flood mitigation measures, US$30.65 million on Solid Waste Management Capacity Improvements, US$19.85 million on Participatory Upgrading of Targeted Flood Prone Low-Income Communities and physical planning support whilst US$4.25 million would be required for institutional strengthening, capacity building, supervision, monitoring and evaluation, and project management.As a Deputy Director of the Policy, Planning, Monitoring and Evaluation Directorate of your institution, use the concept of the logical framework or model to analyse this project identifying the inputs, key activities, outputs, outcomes, impacts, assumptions and external factors. Professor sam has invented a frictionless spring, with a force constant of 2050 N/m. It is oriented horizontally. He affixed a 5 kg ball on the end of the spring and depressed the spring 20 cm from its equilibrium position. How much potential energy did he give it when pulling it back (It would be better to say that he gave this energy to the spring rather than to the ball)? Hint: Does the mass of the ball matter here yet if it moves the spring left or right rather than vertically?a. 205000 J b. 41 J c. 2.05 J d. 50.0 J e. 0.50 J A 23.0 mm diameter bolt is used to fasten two timber as shown in the figure. The nut is tightened to cause a tensile load of 30.1 kN in the bolt. Determine the required outside diameter (mm) of the washer if the washer hole has a radius of 1.5 mm greater than the bolt. Bearing stress is limited to 6.1 Mpa. Which of the following best describes the information that one AS communicates to other AS's via the BGP protocol?A. O it broadcasts a set of policies that neighboring AS's must follow when handling datagrams originating within its own ASB. It transmits a data structure that describes the network topology of its AS so that neighboring AS's can use this data to feed to their routing algorithms (e.gDijkstra)C. It queries neighboring AS's to see if they can route to a particular destination host once the gateway router receives a datagram destined for that hostD. It advertises a list of hosts to which it can route datagrams b) The keys E QUALIZATION are to be inserted in that order into an initially empty hash table of M= 5 lists, using separate chaining. i. Compute the probability that any of the M chains will contain at least 4 keys, assuming a uniform hashing function. ii. Perform the insertion, using the hash function h(k) = 11k%M to transform the kth letter of the alphabet into a table index. iii. Compute the average number of compares necessary to insert a key-value pair into the resulting list. - Visitors of a supermarket were greeted warmly as they entered. Visitors were greeted warmly and, in addition, were given a cup of yogurt by the manager and therefore they spent more money in the restaurant. Which persuasion technique is described in the example (Supermarket)? a. Social norms O b. Contrast effects C. Bait and switch d. Reciprocation 1. Select the correct answer. 1.1.In the Bisection method, the estimated root is based on a. The midpoint of the given interval. b. The first derivative of the given function. c. The second derivative of the given function. d. None of above is correct. 1. 1.2.In the false position method, the estimated root is based on The derivative of the function at the initial guess. b. The midpoint of the given interval. drawing a secant from the function value at xt (lower limit to the function value at Xp (upper limit), d. None of above is correct. C 1.3. In newton Raphson method, the estimated root is based on a. The intersection point of the tangent line at initial guess with the x axis. b. The intersection point of the tingent line at initial guess with the y axis, The intersection point of the tangent line at the maximum point of the given function with the x axis. d. None of above is correct. 1.4.In which of the below methods you can calculate the error in the first iterations The Bisection method b. The False position method. e. The Newton Raphson method. d None of above is correct A string of 50 identical tree lights connected in series dissipates 100 W when connected to a 120 V power outlet. How much power is dissipated by each light? Suppose that you are experimenting with a 15 V source and two resistors: R = 2500 2 and R = 25 02. Find the current for a, b, c, and d below. What do you notice? a. R in series with R (Answer in mA) Help me answer this please The topic chosen is GLOBAL POVERTY. In this Module, you have learned about Virtue Ethics and spent time thinking about an article written on your applied ethics topic from the perspective of a virtue ethicist. In your initial post, you must do the following: Clearly explain the author's position on your topic (animal rights, euthanasia, or global poverty). This should be formatted like a thesis statement (e.g., Slote believes that it is wrong to ....). Clearly explain the author's reasons in support of this position. Make sure to do so well enough that your classmates who are working on another topic understand the author's argument as well as how it counts as an argument from a virtue ethical perspective. Then, state whether you agree with the author's conclusion and explain why or why not. *Remember, the article you need to read for this discussion forum can be found in 5.2: Applying Virtue Ethics and is based on the topic that you've chosen. You should be writing on one of the following articles: Global Poverty: "Famine, Affluence, and Virtue" by Michael Slote. Find F(x) given that F(x)=4x25ln(t2) dt. (Do not include"F(x)=" in your answer.)Question Find F"(x) given that F(x) = Provide your answer below: Content attribution - S 2 4z 5 In (t) dt. (Do not include "F'(x) = =" in your answer.) FEEDBACK MORE INSTRUCTION SUBMIT Describe how the stability of a feedback control loop can be predicted using a Bode diagram. Define all the terms used and indicate normal design specifications. A 400 MVA, 3ph power-station synchronous generator has a synchronous reactance of 1.6 pu. It is operating at a terminal voltage that is 5% above the rated voltage. It is known that a field current of 600 A is required to produce rated output voltage on open-circuit. You can ignore the effects of resistance and magnetic saturation, and assume the phase angle of the stator phase voltage is zero. i) The generator is delivering 100MW at a power-factor of 0.7 lagging. Calculate the magnitude and phase of the stator voltage V and the stator current I in per-unit. At t = 0, a charged capacitor with capacitance C = 500F is connected in series to an inductor with L = 200 mH. At a certain time, the current through the inductor is increasing at a rate of 20.0 A/s. Identify the magnitude of charge in the capacitor. The fundamental frequency wo of the periodic signal x(t) = 2 cos(t) 5 cos(3t) is - An 18 mL sample of hydrochloric acid, HCl(aq), in a flask was titrated with a primary standard solution of sodium carbonate, Na2CO3(aq). Methyl red was used as an indicator. The primary standard solution was prepared by dissolving 0. 53 g of sodium carbonate in enough water to make 100 mL of solution. In a single trial of the titration, the initial volume reading on the burette was 0. 21 mL and the final volume reading was 26. 23 mL. (a) What volume of primary standard solution was used in this trial?(b) What amount of sodium carbonate reacted with the acid, during this trial?(c) What was the concentration of the hydrochloric acid solution?