Answer:
Present Your Findings Write a summary paragraph discussing this experiment and the results. Use the following questions and topics to help guide the content ...
A 0.7 tennis ball is thrown with a velocity of 20 m second to the right what is the momentum of the tennis ball
Explanation:
Momentum of an object is defined as the product of the mass of object and the velocity with which it is moving.
p = mv
where, p = momentum, m= mass and v= velocity
mass m = 0.7 Kg and v = 20 m/s
p = 0.7×20 = 14 Kg-m/sec
Therefore, momentum of the object = 14 kg-m
This a solving question
Please please help
Answer:
Part A
The sound intensity at the location 150 from the firework = 4.3[tex]\overline 5[/tex] W/m²
Part B
The power the firework is emitting is approximately 1,231.5 kW
Explanation:
Part A
The data of the firework sound heard by the two friends are;
Let 'A' represent the location of the friend at a point 150 m from the fireworks and let 'B' represent the location of the friend watching from a distance of 700 m from the firework
The distance of 'A' from the sound, r₁ = 150 m
The distance of 'B' from the sound, r₂ = 700 m
The intensity at which 'B' hears the sound, I₂ = 0.2 W/m²
The relationship between sound intensity and distance is given as follows;
[tex]\dfrac{I_2}{I_1} = \left (\dfrac{r_1}{r_2} \right )^2[/tex]
[tex]\therefore {I_1} = \dfrac{I_2}{ \left (\dfrac{r_1}{r_2} \right )^2} = I_2 \times \left (\dfrac{r_2}{r_1} \right )^2[/tex]
Plugging in the values gives;
[tex]\therefore {I_1} = 0.2 \times \left (\dfrac{700}{150} \right )^2 = \dfrac{196}{45} = 4.3\overline 5[/tex]
The sound intensity at location 'A', I₁ = 4.3[tex]\overline 5[/tex] W/m²
Part B
The relationship between power, 'P', and intensity, 'I', is presented as follows;
[tex]I = \dfrac{P}{4 \cdot \pi \cdot r^2}[/tex]
P = I·4·π·r² = 4·I·π·r²
Therefore, at point 'A', where the distance, r₁ = 150 m, and the intensity, I₁ = 4.3[tex]\overline 5[/tex] W/m², we have;
P = 4 × 4.3[tex]\overline 5[/tex] W/m² × π × (150 m)² = 1231504.32021 W
The power the firework is emitting, P ≈ 1,231.5 kW.
skater spins over a point at a speed of 3.0 rotations per second then the momentum of inertia is 0.60 kg.M2, what is its angular momentum?
Answer:
[tex]L=11.3\ kg-m^2/s[/tex]
Explanation:
Given that,
Angular speed of a skater, [tex]\omega=3\ rot/s=18.84\ rad/s[/tex]
The moment of inertia of the skater, I = 0.6 kg-m²
We need to find the angular momentum of the skater. The formula for the angular momentum of the skater is given by :
[tex]L=I\omega[/tex]
Substitute all the values,
[tex]L=0.6\times 18.84\\\\L=11.3\ kg-m^2/s[/tex]
So, its angular momentum is equal to [tex]11.3\ kg-m^2/s[/tex].
It takes 8.76 hours to travel 427 miles Northwest from Chicago, Illinois to Minneapolis, Minnesota. What is your velocity for the trip?
Answer:
infinity
Explanation:
this is because time is irrelevant
help meeeeeeeeeeee
what is the rheostat and what its ruleeee??
Answer:
Rheostat:=> Rheostat is an electric device used as a variable resistance, like the regulator of the fan. It is used to change the electric resistance in the electric circuit.
Principle / Rule:=> Rheostat works on the principle of Ohm’s law. Ohm’s law states that current in a circuit is inversely proportional to the resistance at the given temperature.
[tex] \infty \infty \infty [/tex]
What is the difference in intensity for two sounds that are 40 dB apart?
the difference of 10 dB is considered as having 10 times the intensity, so difference of 40 dB means :
=》10 × 10 × 10 × 10
=》10000 times
so the the intensity of one sound is 10000 times the other one.
What way is more effective when trying to make magnets repel further/faster, using strong magnets over weak magnets or putting the magnets closer together?
Answer:
north pole of a magnet repels the north pole of another magnet no matter of their shape , size , weakness , strength ,etc .
Explanation:
which of the following is not a main function of the human's body nervous system?
Answer:
I can't see option dear
Explanation:
When a substance is poured from one container to another, its shape changes but its volume does not, what state of matter is the substance in?
A. Plasma
B. Liquid
C. Gas
D. Solid
Answer: When a liquid substance is poured into a vessel, it takes the shape of the vessel, and, as long as the substance stays in the liquid state, it will remain inside the vessel. Furthermore, when a liquid is poured from one vessel to another, it retains its volume (as long as there is no vaporization or change in temperature) but not its shape.
Explanation: A solid has a definite shape and volume. A liquid has a definite volume, but takes the shape of its container. A gas lacks either a defined shape or volume. Plasma is similar to a gas in that its particles are very far apart, but a gas is electrically neutral and plasma has a charge.
Answer:
B
Explanation:
Liquid
please help me out i'm so depressed and such a failure
how does the brightness of the lamp (L) vary if we dispalce the cursor (C) of the rheostat
a)Towards A
b) Towards B
Answer:
ok so first ur not a failure and its okay don't be so hard on ur self
<3Which of the following statements best explains the relationship between the common property regime and energy distribution? The common property regime ____.
may lead to inequitable availability of energy resources or, worse, scarcity
is the direct result of energy security
regime will provide energy security
will prevent energy scarcity
Answer:
the anser is B
Explanation:
True or false blood gets oxygen and releases carbon dioxide in the heart
Answer:
FALSE
Explanation:
You breath in oxygen and your blood takes it through your body then you breath it out as carbon dioxide
The flow of electrons in a circuit follows a path from the negative terminal of the battery to the positive terminal
Answer:
No it's not true electric grow from Positive terminal to negative terminal
Please help giving a lot of points- A rollercoaster cart that has a mass of 4500 kg has 67.5 kJ (kilojoules), or 67,500 J (joules), of gravitational potential
energy. What is its height above the ground?
PT.2
The same 4500 kg rollercoaster cart is moving with 63.0 kJ (kilojoules), or 63,000 J (joules), of kinetic energy at the
bottom of its biggest hill. What is its velocity?
Answer:
(a) h = 1.5 m (b) v = 5.29 m/s
Explanation:
1. Given that,
Mass of a rollercoaster cart, m = 4500 kg
It has 67,500 J of gravitational potential energy.
We know that, the gravitational potential energy is given by :
[tex]E=mgh[/tex]
Put all the values,
[tex]h=\dfrac{E}{mg}\\\\h=\dfrac{67500}{4500\times 10}\\\\h=1.5\ m[/tex]
2. The kinetic energy of an object is given by :
[tex]E=\dfrac{1}{2}mv^2\\\\v=\sqrt{\dfrac{2E}{m}}\\\\v=\sqrt{\dfrac{2\times 63000}{4500}}\\\\v=5.29\ m/s[/tex]
Hence, this is the required solution.
b) The ice cube melting on the nonconducting plate
Is it conduction,convention, or radiation thermal energy
Answer:I think it’s convection
Explanation:
A fall thrown vertically upwards with a speed
of 20 ms-¹ from the top of a tower reaches
the earth in 8seconds. find the height of the
tower.
take g= 10ms-²
Answer:
Height of tower = 480 meter
Explanation:
Given:
Initial velocity = 20 m/s
Time taken to reach ground = 8 second
So,
Final velocity = 0 m/s
Acceleration due to gravity = 10 m/s²
Find:
Height of tower
Computation:
s = ut + (1/2)(g)(t)²
s = (20)(8) + (1/2)(10)(8)²
s = 160 + (1/2)(10)(64)
s = 160 + (10)(32)
s = 160 + 320
s = 480 meter
Height of tower = 480 meter
If a document is to be produced using a duplicating
camera, where should the camera be placed in or
der to obtain an exact copy? A. at the point which
is twice the focal lenght of the lens of the camera
B. at the optical centre of the lens of the camera C
between the principal and a point twice the foca
lens of the lens of the camera D. beyond a poin
twice the focal lenght of the lens of the camera
Answer: A. at the point which
is twice the focal lenght of the lens of the camera
Explanation:
When a certain document is to be produced through the use of a duplicating camera, it should be noted that the camera should be placed at the point which is twice the focal lenght of the lens of the camera so as to get the exact copy of the document.
It should be noted that placing the camera between the principal and a point twice the focal lens of the camera lens or beyond a point that's twice the focal length will not produce the document.
Therefore, the correct option is A
On your first trip to Planet X you happen to take along a 100 g mass, a 40-cm-long spring, a meter stick, and a stopwatch. You're curious about the free-fall acceleration on Planet X, where ordinary tasks seem easier than on earth, but you can't find this information in your Visitor's Guide. One night you suspend the spring from the ceiling in your room and hang the mass from it. You find that the mass stretches the spring by 22.6 cm . You then pull the mass down 10.9 cm and release it. With the stopwatch you find that 10 oscillations take 18.8 s .
Answer:
[tex]g=2.513m/s^2[/tex]
Explanation:
From the question we are told that:
Mass Taken [tex]m=100g \approx 100*10^{-3}[/tex]
Strain on Spring [tex]l_s=22.6cm \approx 22.6*10^{2}[/tex]
Distance pulled down [tex]d_d=10.9[/tex]
Time for ten oscillations take [tex]t=18.8s[/tex]
Generally the equation for angular velocity is mathematically given by
[tex]\omega=2\pi\\\omega=2\pi*\frac{10\ oscillations}{t}\\\\\omega=2\pif=2\pi*\frac{10\ oscillations}{18.8}\\Also\\\omega=\sqrt{\frac{k}{m}} \\\omega=\sqrt{\frac{k}{100*10^{-3}}}[/tex]
Therefore
[tex]{2\pi*\frac{10\ oscillations}{18.8}}=\sqrt{\frac{k}{100*10^{-3}}} \\k=\sqrt{2\pi*\frac{10\ oscillations}{18.8}}*100*10^{-3}\\k=1.112N/m[/tex]
Generally the equation for Acceleration due to gravity is mathematically given by
[tex]F=mg\\mg=k l_s\\g=\frac{k l_s}{m}\\g=\frac{1.112*2.6*10^{2}}{100*10^{-3}}[/tex]
[tex]g=2.513m/s^2[/tex]
If a body is thrown up with an initial velocity 'u' and covers a maximum height of 'h' , then 'h' is equal to u²/2g
Explain in detail.
Answer:
1/2 m u^2 initial Kinetic Energy of body
m g h Potential Energy body attains as it rises to height
1/2 m u^2 = m g h conversion of KE to PE
h = u^2 / ( 2 g)
What is the total resistance of the circuit shown below?
Two-resistor parallel circuit
A. 50 ohms
B. 30 ohms
C. 25 ohms
D. 12 ohms
HELP
Answer:
D. 12Explanation:
I just did the Gizmo and the correct answer is 12 :) Hope this helps!
The total resistance of the circuit for parallel resistors of 41 Ω and 17 Ω is 12Ω. Hence option D is correct.
What is a parallel and series combination of resistance?When two or more resistors are connected between two same points, they are said to be connected in parallel combination(as shown in fig). The equivalent resistance is the reciprocal and the sum of reciprocals of all resistance connected in parallel combination.
[tex]\frac{1}{R_{s}} = \frac{1}{R_{1}} + \frac{1}{R_{2} } + \frac{1}{R_{3}} ..........+ \frac{1}{R_{n} }[/tex] where Rs is the equivalent or total resistance of the circuit.
In parallel combination, same potential difference exists across each resistor. But current through each resistance is different.
When two or more resistors are connected one after other, they are said to be connected in series as shown in figure. in this combination voltage difference across each resistance is different which is given by ohms law. current flowing through each resistance is same.
equivalent resistance for series combination is given by,
R(s) = R₁ + R₂ + R₃...........+R(n).
In this problem given resistance are not seen, Resistor can be with 41 and 17Ω.
Given,
R₁ = 17 Ω
R₂ = 41 Ω
[tex]R_{s} = ?[/tex]
by parallel combination,
[tex]\frac{1}{R_{s}} = \frac{1}{R_{1} } + \frac{1}{R_{2} }[/tex]
[tex]R_{s} = \frac{R_{1} R_{2} }{R_{1} + R_{2} }= \frac{17*41}{17+41} = \frac{697}{58} = 12[/tex]
R = 12 Ω.
Hence option D is correct.
To know more about Resistor :
https://brainly.com/question/24297401
#SPJ3.
Please answer needed as soon as possible, will give brainlest...fill in the question mark area! No files, cant access on a school computer thank you!!!!
The advantage of using a machine is that we apply less ??? at the input for the work done at the output.
Answer:
That is because we apply less Work.
Brainliest?? I hope this helps!!!
Explanation:
the natural radioactivity is done by(controlling the nuclear energy-no ability to control the nuclear energy-both of them)
Answer:
Nuclear power plants are fueled by uranium, which emits radioactive substances. Most of these substances are trapped in uranium fuel pellets or in sealed metal fuel rods. However, small amounts of these radioactive substances (mostly gases) become mixed with the water that is used to cool the reactor.
A plastic rod becomes negatively charged when it is rubbed with a piece of wool. How does the rod become charged?
Electrons move from the rod to the wool.
Protons move from the rod to the wool.
Electrons move from the wool to the rod.
Protons move from the wool to the rod.
Electrons move from the wool to the rod.
BEcause if they move from wool to rod, the rod has more number of electrons now. Hence making it negatively charged
The plastic rod becomes charged when electrons move from the wool to the rod to become negatively charged. Details about charge can be found below.
What is electronegativity?Electronegativity is the tendency, or a measure of the ability, of an atom or molecule to attract electrons and thus form bonds.
According to this question, a plastic rod becomes negatively charged when it is rubbed with a piece of wool.
An atom becomes negatively charged when it gains electrons from another atom, hence, it can be said that the plastic rod becomes charged when electrons move from the wool to the rod to become negatively charged.
Learn more about charge at: https://brainly.com/question/19886264
#SPJ2
Which is equivalent to 1 W?
Answer:
1 joule per second.
Explanation:
The watt (symbol: W) is a unit of power or radiant flux. In the International System of Units (SI), it is defined as a derived unit of (in SI base units) 1 kg⋅m2⋅s−3 or, equivalently, 1 joule per second.
A pelican flying along a horizontal path drops a fish from a height of 12.3 m. the fish travels 16.0m horizontally before it hits the water below. What is the Pelican's initial speed?
Answer:
10.1 m/s
Explanation:
Let the coordinates of the pelican's position be (x, y).
Now, since it is dropped from a height of 12.3 m, then initial velocity is zero and using Newton's 2nd law of motion, we have;
12.3 = 0 - ½gt²
½gt² = 12.3
t² = 12.3 × 2/9.8
t² = 2.51
t = √2.51
t = 1.5843 s
Now, it travels 16.0m horizontally before it hits the water below. Using the formula, distance = speed × time, we have;
16 = v_x•t
Thus;
16 = v_x × 1.5843
v_x = 16/1.5843
v_x = 10.1 m/s
Now, the velocity in the vertical y-direction is zero.
Thus;
v = √((v_x)² + (v_y)²)
v = √((10.1² + 0²))
v = 10.1 m/s
Starting from the results of Examples 5.4 and 5.5, estimate the number of cubic meters of water that would flow each second through an OTEC plant large enough ( 1000 M W e 1000 MWe) to provide electricity for Miami. Use the approximation of an ideal heat engine as in the examples. If this water flows at a velocity of 4 m / s 4 m/s, what would be the necessary diameter of the pipes?
Answer: Hello Results of examples 5.4 and 5.5 are missing from your question but I was able to find it online and use it to resolve your question
answer :
a) 1780 m^3/sec
b) 23.81 m
Explanation:
a) calculate the number of m^3 of water flowing through an OTEC plant charge
assumption : assuming an ideal heat engine
Q / t = m*c*∆T * (eff) / t
1e^9 J/s = 1g/cc *V(1cal/g°C) * 2°C (6.7%)*(4.184J/cal) / t
Hence: V / t ( number of m^3 of water ) = 1.78e^9 cc / sec = 1.78 * 10
= 1780 m^3/sec
b) Determine the diameter of pipes
Given that the water flows at 4m/s ( velocity )
1780 m^3 /sec = A * V ------ ( 1 )
A = π*d^2/4 = 1780 / 4 = 445 m^2 -------- ( 2 )
v = 4 m/s
Back to equation 2
d^2 = ( 445 * 4 ) / π
≈ 567
∴ necessary diameter ( d ) = [tex]\sqrt{567}[/tex] = 23.81 m
On Earth, the gravitational Field strength is much than on the moon. If a piece of rock was taken from the Moon to the Earth, state what change, if any, there would be in mass, weight and density of the rock.
1. Mass
2. Weight
3. Density
Define and describe the following terms: amplitude, wavelength, frequency, period, tension.
Answer:
Amplitude—distance between the resting position and the maximum displacement of the wave
Frequency—number of waves passing by a specific point per second
Period—time it takes for one wave cycle to complete
wavelength λ - the distance between adjacent identical parts of a wave, parallel to the direction of propagation.
Tension - described as the pulling force transmitted axially by the means of a string, a cable, chain, or similar one-dimensional continuous object, or by each end of a rod, truss member, or similar three-dimensional object
A taxi is travelling at 15 m/s. Its driver accelerates with
acceleration
[tex] {3m.s}^{2} [/tex]
for 4 s. What is its new velocity?
Which three statements describe electromagnetic waves?
Answer:
It is most likely option A B and C
Answer:
I think option A ,B,D are correct