What volume of oxygen is required to burn the above Hydrogen in space when the temperature is -50 degrees Celsius and pressure is 50 kPa?

Answers

Answer 1

Answer:

To calculate the volume of oxygen required to burn hydrogen, we need to use the balanced chemical equation for the combustion of hydrogen with oxygen which is

2H2(g) + O2(g) → 2H2O(g)

Two moles of hydrogen gas combine with one mole of oxygen gas to form two moles of water vapour, according to this equation. The coefficients in the equation provide information on the mole ratios of the reactants and products.

To determine the volume of oxygen necessary, we must first convert the problem's circumstances to standard temperature and pressure (STP), which are 0 degrees Celsius and 101.3 kPa. This conversion may be accomplished using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

Next step is to convert the temperature of -50 degrees Celsius to Kelvin:

T = (−50 + 273.15) K = 223.15 K

Now we can use the ideal gas law to calculate the number of moles of hydrogen required for the reaction:

n(H2) = PV/RT = (50 kPa)(V)/(8.314 J/(mol·K))(223.15 K)

where we have used the units of the gas constant R in Joules per mole Kelvin (J/(mol·K)).

The stoichiometry of the balanced chemical equation may then be used to calculate the amount of moles of oxygen required for the reaction. Because the hydrogen-to-oxygen ratio is 2:1, we require half as many moles of oxygen as hydrogen:

n(O2) = n(H2)/2

Finally, we can use the ideal gas law again to calculate the volume of oxygen required at STP:

n(O2) = PV/RT = (101.3 kPa)(V)/(8.314 J/(mol·K))(273.15 K)

Now we can substitute the expression for n(O2) in terms of n(H2) into the equation for V(O2) and solve for V(O2):

V(O2) = n(O2)RT/P = [(50 kPa)(V)/(8.314 J/(mol·K))(223.15 K)](8.314 J/(mol·K))(273.15 K)/(101.3 kPa)

Simplifying this expression and solving for V(O2), we get:

V(O2) = (V/2) * (101.3/50) * (273.15/223.15) = 3.07 V

As a result, at -50 degrees Celsius and 50 kPa, the volume of oxygen required to burn a given volume of hydrogen in space is 3.07 times the volume of hydrogen. It should be noted that the volume units will be determined by the initial volume supplied for hydrogen in the problem.

(im so sorry if its wrong)


Related Questions

using the following information calculate the energy difference between the two conformations.
[H<-->H]eclipsed - 4 KJ/mol (CH3 <--> CH3] Letimes = 11 KJ/mol [CH3 <--> CH3]gauche = 3.8 KJ/mol [H<-->CH3]clipes = 6 KJ/mol)

Answers

The energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations is 0.2 KJ/mol.

The total energy difference between the two conformations can be calculated by adding the Letimes energy to the energy difference between [H<--->H]eclipsed and [H<--->CH3]eclipsed, and subtracting the energy difference between [CH3<--->CH3]gauche and [H<--->CH3]eclipsed.

Thus, the total energy difference is:

Letimes + [H<--->CH3]eclipsed - [CH3<--->CH3]gauche - [H<--->H]eclipsed

= 11 KJ/mol + 6 KJ/mol - 3.8 KJ/mol - 4 KJ/mol

= 9.2 KJ/mol

Therefore, the energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations is 9.2 KJ/mol. However, the question asks for the energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations only.

Therefore, we need to subtract the energy difference between [H<--->CH3]eclipsed and [CH3<--->CH3]gauche to get the answer:

[H<--->H]eclipsed - [CH3<--->CH3]gauche = 4 KJ/mol - 3.8 KJ/mol = 0.2 KJ/mol

Hence, the energy difference between the [H<--->H]eclipsed and [CH3<--->CH3]gauche conformations is 0.2 KJ/mol.

For more questions like Energy click the link below:

https://brainly.com/question/12807194

#SPJ11

The Ka value for acetic acid, CH3COOH(aq), is 1.8x10^-5. Calculate the ph of a 2.80 M acetic acid solution.PH=

Answers

The pH of a 2.80 M acetic acid solution is approximately: 2.65.

To calculate the pH of a 2.80 M acetic acid solution, given the Ka value for acetic acid, [tex]CH^3COOH[/tex](aq), is 1.8x[tex]10^{-5[/tex], follow these steps:

1. Write the ionization equation for acetic acid: [tex]CH^3COOH[/tex](aq) ⇌ [tex]CH^3COO-[/tex](aq) + H+(aq)
2. Set up an ICE (Initial, Change, Equilibrium) table to represent the concentrations of each species at equilibrium.
3. Since the initial concentration of [tex]CH^3COOH[/tex] is 2.80 M, assume x M of [tex]CH^3COOH[/tex] dissociates into x M of[tex]CH^3COO-[/tex] and H+ ions.
4. Write the expression for Ka: Ka = [[tex]CH^3COO-[/tex]][H+]/[[tex]CH^3COOH[/tex]]
5. Substitute the equilibrium concentrations into the Ka expression: 1.8x[tex]10^{-5[/tex] = (x)(x)/(2.80-x)
6. Since Ka is very small, the change in concentration (x) is negligible compared to the initial concentration of acetic acid. Therefore, you can simplify the expression to: 1.8x10^-5 = x^2/2.80
7. Solve for x (concentration of H+ ions): x = √(1.8x[tex]10^{-5[/tex] * 2.80) ≈ 0.00224 M
8. Calculate the pH using the formula pH = -log10[H+]: pH = -log10(0.00224) ≈ 2.65

To know more about "pH" refer here:

https://brainly.com/question/30761746#

#SPJ11

what is the equilibrium expression for the following reaction? 2na2o (s) ⇌ 4na (l) o2 (g)

Answers

The equilibrium expression for the reaction 2Na2O(s) ⇌ 4Na(l) + O2(g) is represented by Kc = [O2]^x

Chemical equilibrium occurs when the rate of the forward reaction equals the rate of the reverse reaction, and the concentrations of the reactants and products remain constant over time. For the given reaction, we can represent the equilibrium constant (Kc) using the concentrations of the products and reactants raised to the power of their stoichiometric coefficients. However, since equilibrium constants only consider gases and aqueous solutions, the expression will exclude solid and liquid species. Therefore, the equilibrium expression for this reaction is: Kc = [O2]^x

Here, [O2] represents the concentration of oxygen gas (O2) in the equilibrium mixture, and x is the stoichiometric coefficient of O2 in the balanced equation, which is 1. The reaction involves the decomposition of solid sodium oxide (2Na2O) into liquid sodium (4Na) and gaseous oxygen (O2). Due to the exclusion of solid and liquid species from the equilibrium expression, only the concentration of oxygen gas is considered in the equilibrium constant calculation. In conclusion, the equilibrium expression for the reaction 2Na2O(s) ⇌ 4Na(l) + O2(g) is represented by Kc = [O2]^x

Learn more about chemical equilibrium at:

https://brainly.com/question/5537989

#SPJ11

Calculate the amount of heat released from combustion of 3 g of gasoline. The heat capacity of the bomb calorimeter is 9.96 kJ/°C. The initial temperature is 20°C and the final temperature is 24.7°C.

Answers

In the combustion of 3 g of gasoline, 46.99 kJ of heat are produced.

Determine how much heat is released during combustion.

We must utilize the heat capacity of the bomb calorimeter and the change in temperature to determine how much heat is released during the combustion of 3 g of gasoline.

We must first determine the temperature change:

T is the product of the initial and final temperatures.

ΔT = 24.7°C - 20°C

ΔT = 4.7°C

The amount of heat released can then be calculated using the equation below:

q = CΔT

where q is the amount of heat released, C is the bomb calorimeter's heat capacity, and T is the temperature change.

Inputting the specified values results in:

q = 9.96 kJ/°C × 4.7°C

q = 46.99 kJ

To know more about combusted visit:

https://brainly.com/question/17066788

#SPJ1

A 0.18-m rigid tank is filled with saturated liquid water at 120°C. A valve at the bottom of the tank is now opened, and one-half of the total mass is withdrawn from the tank in the liquid form. Heat is transferred to water from a source at 230°C so that the temperature in the tank remains constant.

Answers

During the process of withdrawing one-half of the total mass of saturated liquid water from the 0.18-m rigid tank at 120°C, heat is transferred from a 230°C source to maintain a constant temperature in the tank. This results in the remaining water in the tank staying in the saturated liquid state at 120°C.

Regarding the 0.18-m rigid tank filled with saturated liquid water at 120°C, where one-half of the total mass is withdrawn in liquid form and heat is transferred from a 230°C source to maintain a constant temperature, please consider the following steps:

1. The initial state of the system is a saturated liquid water at 120°C.
2. The valve at the bottom of the tank is opened, allowing one-half of the total mass to be withdrawn in the liquid form. This reduces the mass of water in the tank by 50%.
3. During this process, heat is transferred to the water from a 230°C source to maintain the constant temperature of 120°C in the tank. This heat transfer compensates for the cooling effect caused by the withdrawal of liquid water.
4. Since the temperature in the tank remains constant at 120°C, the water remains in the saturated liquid state throughout the process.

Know more about temperature - brainly.com/question/27944554

#SPJ11

what can you conclude about the following reaction? galactose glucose → lactose water

Answers

The reaction between galactose and glucose is a condensation reaction, resulting in the formation of lactose and water.

Based on the provided information, we can conclude that the reaction is a condensation reaction between galactose and glucose, forming lactose and water as products.

1. Identify the reactants: In this case, the reactants are galactose and glucose, which are both monosaccharides (simple sugars).

2. Identify the products: The products are lactose, which is a disaccharide, and water.

3. Analyze the reaction: Since the reaction involves the combination of two monosaccharides to form a disaccharide and water, we can conclude that it's a condensation reaction, also known as a dehydration synthesis reaction. This type of reaction occurs when two molecules combine, and a water molecule is removed in the process.

In summary, the reaction between galactose and glucose is a condensation reaction, resulting in the formation of lactose and water.

More on condensation reaction: https://brainly.com/question/31322120

#SPJ11

Molar concentration of NaOH (mol/L) 2. Volume of weak acid (mL) 3. Buret reading of NaOH, Initial(mL) 4. Buret reading NaOH at stoichiometric point, final(mL) 5. Volume of NaOH dispensed(mL) 6. Instructor's approval of pH vs, V_ NaOH graph 7. Moles of NaOH to stoichiometric point (mol) 8. Moles of acid (mol) 9. Molar concentration of acid (mol/L) 10. Average molar mass of add (mol/L) Molar mass and the PK_a of a solid weak acid sample no.__ Monoprotic or diprotic acid? ____suggested mass____1. Mass of dry, solid acid(g) 2. Molar concentration of NaOH (mol/L) 3. Buret reading of NaOH, initial(mL) 4. Buret reading NaOH at stoichiometric point, final(mL) 5. Volume of NaOH dispensed (mL) 6. Instructor's approval of PH versus V_NaOH graph 7. Moles of NaOH to stoichiometric point(mol) 8.Moles of acid(mol) 9. Molar mass of acid (g/mol) 10. Average molar mass of acid(g/mol) 11. Volume of NaOH halfway to stoichiometric point(mL) 12. PK_a1 of weak acid(from graph) 13. Average PK_a1 14. How calculations for trial 1 on the next page.

Answers

1. Mass of dry, solid acid (g): This is the mass of the sample of the acid that you are titrating.

What is solid acid?

Solid acids are acids that exist in solid form rather than in solution. Unlike liquid acids, solid acids do not dissociate into ions when dissolved in water. Instead, they remain in their molecular form and can therefore act as a catalyst in many industrial and chemical reactions.

2. Molar concentration of NaOH (mol/L): This is the molar concentration of the NaOH solution that you are using to titrate the acid sample.
3. Buret reading of NaOH, initial (mL): This is the volume of the NaOH solution that is in the buret before you begin titrating the acid.
4. Buret reading NaOH at stoichiometric point, final (mL): This is the volume of the NaOH solution that is in the buret when you reach the stoichiometric point.
5. Volume of NaOH dispensed (mL): This is the difference between the initial and final buret readings of the NaOH solution.
6. Instructor's approval of PH versus [tex]V_{NaOH[/tex] graph: This is to ensure that the acid-base titration was done correctly and the graph accurately reflects the results.
7. Moles of NaOH to stoichiometric point (mol): This is the number of moles of NaOH required to reach the stoichiometric point.
8. Moles of acid (mol): This is the number of moles of acid that were titrated.
9. Molar mass of acid (g/mol): This is the molar mass of the acid sample.
10. Average molar mass of acid (g/mol): This is the average molar mass of the acid sample, which is calculated by taking the mass of the sample divided by the moles of the acid.
11. Volume of NaOH halfway to stoichiometric point (mL): This is the volume of the NaOH solution that is in the buret when you are halfway to the stoichiometric point.
12. [tex]PK_{a1[/tex] of weak acid (from graph): This is the [tex]PK_{a1[/tex] of the weak acid sample, which is calculated using the graph.
13. Average [tex]PK_{a1[/tex]: This is the average of the [tex]PK_{a1[/tex] of the weak acid sample.
14. How calculations for trial 1 on the next page: This is the instructions on how to calculate the results of the first titration trial.

To learn more about solid acid
https://brainly.com/question/15367135
#SPJ1

Calculate Hrxn for the combustion of octane (C8H18), a component of gasoline, by using average bond energies, and then calculate it using enthalpies of formation from Appendix IIB. What is the percent difference between your results? Which result would you expect to be more accurate?

Answers

Combustion is a chemical reaction in which a substance reacts with oxygen to produce heat and light. Gasoline is a mixture of hydrocarbons, including octane ([tex]C_{8} H_{18}[/tex]). The process of combustion involves the breaking of chemical bonds in the fuel molecules and the formation of new bonds with oxygen molecules.

To calculate the Hrxn for the combustion of octane, one approach is to use average bond energies, which are based on the energy required to break and form bonds. Another approach is to use enthalpies of formation, which are based on the energy required to form a compound from its constituent elements.
The percent difference between the two results can vary depending on the accuracy of the data used and the assumptions made in the calculations. However, in general, enthalpies of formation are considered to be more accurate than average bond energies because they take into account the specific conditions under which the reaction occurs, such as temperature and pressure. Enthalpies of formation also provide a more direct measure of the energy change involved in a reaction.
In summary, the Hrxn for the combustion of octane can be calculated using either average bond energies or enthalpies of formation. The percent difference between the results can vary, but enthalpies of formation are generally considered to be more accurate.

To know more about the combustion :

https://brainly.com/question/31123826

#SPJ11

a 529.8 ml sample of carbon dioxide was heated to 357 k. if the volume of the carbon dioxide sample at 357 k is 779.1 ml, what was its temperature at 529.8 ml?

Answers

If the volume of the carbon dioxide sample at 357 k is 779.1 ml the temperature at 529.8 ml is 310.3 K.

The ideal gas law states that PV=nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature. The number of moles of carbon dioxide does not change, so the equation can be rearranged to T = PV/nR.

By replacing P with 1 and nR with 0.0821 L*kPa/mol*K, the equation becomes T = V/0.0821. Therefore, to find the temperature at 529.8 ml, the volume was plugged into the equation and multiplied by 0.0821. The result was 310.3 K.

Learn more about carbon dioxide at: https://brainly.com/question/22963529

#SPJ11

why does the specific rotation of a freshly prepared solution of the form gradually decrease with time? why do solutions of the and forms reach the same specific rotation at equilibrium?

Answers

The specific rotation of a freshly prepared solution of the α-form gradually decreases with time due to a phenomenon called mutarotation. The solutions of the and forms reach the same specific rotation at equilibrium because equilibrium mixture contains a constant ratio of these two forms, regardless of their initial concentrations

Mutarotation occurs when there is an interconversion between two anomeric forms of a sugar molecule, such as the α- and β-forms, in an aqueous solution. This interconversion leads to an equilibrium state in which both forms coexist, resulting in a change in the optical rotation of the solution.

The reason that solutions of the α- and β-forms reach the same specific rotation at equilibrium is because the equilibrium mixture contains a constant ratio of these two forms, regardless of their initial concentrations. This is due to the spontaneous interconversion of the anomeric forms, which depends on the thermodynamic stability of the molecules, and not on their initial concentrations. Therefore, at equilibrium, the specific rotation of the solution reflects the combined contributions of both the α- and β-forms, giving a constant value for the specific rotation regardless of the starting form.

Learn more about mutarotation at:

https://brainly.com/question/13265198

#SPJ11

Is the low solubility of KHT a result of an unfavorable ∆H° or an unfavorable ∆S° value? Give your reasoning.

Answers

The low solubility of KHT is likely a result of an unfavorable ∆H° value. This is because KHT is a relatively large and complex molecule, which means that breaking apart its solid structure requires a significant amount of energy.

Additionally, the molecule contains multiple hydrogen bonds, which are relatively strong intermolecular forces. These factors contribute to a relatively large positive ∆H° value, which makes it energetically unfavorable for KHT to dissolve in water.

On the other hand, the ∆S° value for the dissolution of KHT is likely not a major contributing factor, as the process does not involve a significant change in the degree of disorder or randomness of the system. The unfavorable ∆H° means that energy is absorbed during the dissolution, making the process less favorable and leading to low solubility.

Learn more about solubility here:

https://brainly.com/question/28170449

#SPJ11

C. Write the name of the alkane next to the drawing of the molecule.

Answers

Answer:

propane

Explanation:

the structure of propane

calculate the concentrations of h , hco3−, and co32− in a 0.087 m h2co3 solution.

Answers

The concentrations of H+, HCO₃-, and CO₃₂- in a 0.087 M H₂CO₃ solution are 3.06 x 10⁻⁴ M, 0.0867 M, and 4.06 x 10⁻⁶ M, respectively.

The dissociation reactions for carbonic acid (H₂CO₃) are as follows:

H₂CO₃ ⇌ H+ + HCO₃- (Ka₁ = 4.45 x 10⁻⁷)

HCO₃- ⇌ H+ + CO₃₂- (Ka₂ = 4.69 x 10⁻¹¹)

Let x be the concentration of H+ in the solution. Then, the concentration of HCO₃- is (0.087 - x) and the concentration of CO₃₂- is equal to the concentration of H+.

Using the first dissociation equation, we can write the equilibrium expression:

Ka1 = [H+][HCO₃-]/[H₂CO₃]

Substituting the values and simplifying, we get:

4.45 x 10⁻⁷ = x(0.087 - x)/0.087

Solving for x, we get:

x = 3.06 x 10⁻⁴ M

Therefore, the concentration of H+ in the solution is 3.06 x 10⁻⁴ M.

Using the second dissociation equation, we can write the equilibrium expression:

Ka₂ = [H+][CO₃₂-]/[HCO₃-]

Substituting the values and simplifying, we get:

4.69 x 10⁻¹¹ = x²/(0.087 - x)

Since the concentration of CO₃₂- is equal to the concentration of H+, we can simplify the equation as:

4.69 x 10⁻¹¹ = x²/0.087

Solving for x, we get:

x = 4.06 x 10⁻⁶ M

Therefore, the concentration of CO₃₂- in the solution is 4.06 x 10⁻⁶ M.

To find the concentration of HCO3-, we can use the equation:

[HCO₃-] = 0.087 - [H+] - [CO₃₂-]

Substituting the values, we get:

[HCO₃-] = 0.087 - 3.06 x 10⁻⁴ - 4.06 x 10⁻⁶

[HCO₃-] = 0.0867 M

Therefore, the concentration of HCO₃- in the solution is 0.0867 M.

In summary, the concentrations of H+, HCO₃-, and CO₃₂- in a 0.087 M H₂CO₃ solution are 3.06 x 10⁻⁴ M, 0.0867 M, and 4.06 x 10⁻⁶ M, respectively.

Learn More about concentrations

https://brainly.com/question/28564792

#SPJ4

Do you think BaCrO_4 is soluble in acidic or in neutral solutions? Explain think your answer using relevant chemical reactions.

Answers

BaCrO_4 is insoluble in both acidic and neutral solutions. This is because BaCrO_4 is a salt that is highly insoluble in water due to its low solubility product constant (Ksp) value of 1.17 x 10^-10.

When BaCrO_4 is added to an acidic solution, it reacts with the hydrogen ions (H+) present in the solution to form chromic acid (H2CrO4) and barium ions (Ba2+). This reaction is represented by the following equation:
BaCrO4 + 2H+ → Ba2+ + H2CrO4
However, the formation of chromic acid does not increase the solubility of BaCrO_4, as both Ba2+ and H2CrO4 are also insoluble salts. In a neutral solution, BaCrO_4 does not undergo any significant reaction, and the salt remains insoluble. The BaCrO_4 particles may undergo some hydrolysis, but this does not increase their solubility in water.
Therefore, BaCrO_4 remains insoluble in both acidic and neutral solutions.

Learn more about acidic solution here:

https://brainly.com/question/13208021

#SPJ11

A mixture of 5 kg of H2 and 4 kg of O2 is compressed in a piston-cylinder assembly in a Polytropic process for which n = 1.6. The temperature increases from 40 to 250 degree C. Using constant values for the specific heat, determine (a) the heat transfer, in kJ (b) the entropy change, in kJ/K.

Answers

The heat transfer (a) is 663.12 kJ and the entropy change is 1.21 kJ/K.(B)

In a polytropic process, we can use the following equations to find the heat transfer and entropy change:

1. For heat transfer (Q): Q = m * Cv * (T2 - T1)
2. For entropy change (ΔS): ΔS = m * Cv * ln(T2/T1)

Given: m_H2 = 5 kg, m_O2 = 4 kg, n = 1.6, T1 = 40°C = 313 K, T2 = 250°C = 523 K

First, we need to find the specific heat at constant volume (Cv) for the mixture:
Cv_mix = (m_H2 * Cv_H2 + m_O2 * Cv_O2) / (m_H2 + m_O2)

Using Cv_H2 = 10.16 kJ/kgK and Cv_O2 = 6.45 kJ/kgK:
Cv_mix = (5 * 10.16 + 4 * 6.45) / (5 + 4) = 8.312 kJ/kgK

Now, calculate (a) heat transfer:
Q = (5 + 4) * 8.312 * (523 - 313) = 663.12 kJ

Finally, calculate (b) entropy change:
ΔS = (5 + 4) * 8.312 * ln(523/313) = 1.21 kJ/K. (B)

To know more about polytropic process click on below link:

https://brainly.com/question/13001350#

#SPJ11

What is the ph of 0.203 m diethylammonium bromide, (c2h5)2nh2br?

Answers

The pH of 0.203 M diethylammonium bromide, (C₂H₅)₂NH₂Br, is approximately 8.77.

Diethylammonium bromide is a salt of a weak base, diethylamine (C₂H₅)₂NH, and a strong acid, hydrobromic acid (HBr). When it is dissolved in water, it undergoes hydrolysis to form its respective weak base and strong acid. The diethylamine acts as a weak base, accepting a proton from water and generating hydroxide ions (OH⁻). The hydroxide ions increase the pH of the solution, making it basic.

The Kb value of diethylamine is 5.38 x 10⁻¹². Using this value, we can calculate the concentration of OH⁻ ions that are generated in the solution. The OH⁻ concentration is then used to calculate the pH of the solution using the equation pH = 14 - pOH.

To find the concentration of OH⁻ ions, we need to use the Kb expression:

Kb = [NH₂][OH⁻]/[NH₃⁺]

At equilibrium, [NH₂] = [OH⁻] and [NH₃⁺] = [(C₂H₅)₂NH₃⁺].

Therefore, Kb = [OH⁻]²/[(C₂H₅)₂NH₃⁺]

Solving for [OH⁻], we get [OH⁻] = sqrt(Kb x [(C₂H₅)₂NH₂Br]) = 1.50 x 10⁻⁴ M.

Using the equation pH = 14 - pOH, we get pH = 8.77. Therefore, the pH of 0.203 M diethylammonium bromide solution is approximately 8.77.

learn more about PH here:

https://brainly.com/question/15289714

#SPJ11

draw the lewis structure for h2nnh2. now answer the following questions based on your lewis structure: (enter an integer value only.)

Answers

In H2NNH2, we have two Nitrogen atoms in the center, so N-N is the central bond. The Hydrogen atoms are bonded to the Nitrogen atoms, so the structure will look like this: H-N-N-H.

How many lone pairs are in the Lewis structure of H2NNH2?

The Lewis structure for H2NNH2 and answer your questions,follow these steps:

Count the total number of valence electrons: Nitrogen has 5 valence electrons, and Hydrogen has 1 valence electron. There are 2 Nitrogens and 4 Hydrogens in H2NNH2, so the total number of valence electrons is (2x5) + (4x1) = 10 + 4 = 14 valence electrons.
Place the least electronegative atom in the center, which is Nitrogen in this case. Connect the other atoms to the central atom with single bonds. In H2NNH2, we have two Nitrogen atoms in the center, so N-N is the central bond. The Hydrogen atoms are bonded to the Nitrogen atoms, so the structure will look like this: H-N-N-H.
Distribute the remaining valence electrons to satisfy the octet rule for each atom. In H2NNH2, each Nitrogen needs 3 more electrons to satisfy the octet rule. Assign a lone pair of electrons to each Nitrogen, and the remaining 4 electrons will form a double bond between the Nitrogen atoms. So, the final Lewis structure is:
  H
  |
  N=N
 / \
H   H
Based on the Lewis structure, the integer value you are looking for might be the number of valence electrons (14) or the number of bonds in the molecule (4).

Learn more about Lewis structure of hydrazine H2NNH2

brainly.com/question/29756061

#SPJ11

In H2NNH2, we have two Nitrogen atoms in the center, so N-N is the central bond. The Hydrogen atoms are bonded to the Nitrogen atoms, so the structure will look like this: H-N-N-H.

How many lone pairs are in the Lewis structure of H2NNH2?

The Lewis structure for H2NNH2 and answer your questions,follow these steps:

Count the total number of valence electrons: Nitrogen has 5 valence electrons, and Hydrogen has 1 valence electron. There are 2 Nitrogens and 4 Hydrogens in H2NNH2, so the total number of valence electrons is (2x5) + (4x1) = 10 + 4 = 14 valence electrons.
Place the least electronegative atom in the center, which is Nitrogen in this case. Connect the other atoms to the central atom with single bonds. In H2NNH2, we have two Nitrogen atoms in the center, so N-N is the central bond. The Hydrogen atoms are bonded to the Nitrogen atoms, so the structure will look like this: H-N-N-H.
Distribute the remaining valence electrons to satisfy the octet rule for each atom. In H2NNH2, each Nitrogen needs 3 more electrons to satisfy the octet rule. Assign a lone pair of electrons to each Nitrogen, and the remaining 4 electrons will form a double bond between the Nitrogen atoms. So, the final Lewis structure is:
  H
  |
  N=N
 / \
H   H
Based on the Lewis structure, the integer value you are looking for might be the number of valence electrons (14) or the number of bonds in the molecule (4).

Learn more about Lewis structure of hydrazine H2NNH2

brainly.com/question/29756061

#SPJ11

The solubility of calcium sulfate at a given temperature is 0.217 g/100 mL. Calculate the Ksp at this temperature. After you get your answer, take the negative log and enter that (so it's like you're taking the pKsp)!can someone please help i got 5.32 and it was wrong

Answers

The pKsp of calcium sulfate at this temperature is 5.60.

To calculate the Ksp of calcium sulfate, we need to use the equation:

CaSO4 (s) ⇌ Ca²⁺ (aq) + SO₄²⁻ (aq)

When, solubility = 0.217 g/100 mL and,

The molar mass of CaSO4 = 40.08 (Ca) + 32.07 (S) + 4*16.00 (O) = 136.15 g/mol

Then the molar solubility is:

Molar solubility = (0.217 g/100 mL) / (136.15 g/mol)

                         = 0.00159 mol/100 mL

                         = 0.00159 mol/L

The Ksp expression for calcium sulfate is:

Ksp = [Ca²⁺] × [SO₄²⁻]

At equilibrium, the concentration of Ca2+ and SO42- will be equal to the solubility of calcium sulfate:

[Ca2+] = 0.00159 mol/L

[SO42-] = 0.00159 mol/L

Substituting these values into the Ksp expression:

Ksp = (0.00159 mol/L)(0.00159 mol/L)

      = 2.53 × 10⁻⁶

Taking the negative log of the Ksp:

pKsp = -log(Ksp)

         = -log(2.53 × 10^-6)

          = 5.60

To know more about Ksp and pKsp, click on the below link:

https://brainly.com/question/22782525

#SPJ11

What is the strongest intermolecular force in H2S?
A. dipole-dipole
B. london dispersion
C. ionic
D. hydrogen bonding

Answers

The strongest intermolecular force in H2S is dipole-dipole. H2S is a polar molecule with a permanent dipole moment. This means that the positive end of one molecule will attract the negative end of another molecule, leading to dipole-dipole interactions.

H2S does not have hydrogen bonding or ionic interactions, and while London dispersion forces are present in all molecules, they are weaker than dipole-dipole interactions in H2S.
The strongest intermolecular force in H2S is:
A. dipole-dipole
This is because H2S is a polar molecule with a bent molecular geometry, which results in the presence of a net dipole moment. Dipole-dipole interactions occur between the positive and negative ends of these polar molecules. Since H2S does not contain any ions (as in ionic forces) or a hydrogen atom bonded to a highly electronegative atom like nitrogen, oxygen, or fluorine (as in hydrogen bonding), the strongest intermolecular force present in H2S is dipole-dipole.

Visit here to learn more about  intermolecular force:

brainly.com/question/9007693

#SPJ11

Individuals in this stage of change may sporadically engage in physical activity but without any form, structure, or consistency.
Select one:
a. Maintenance
b. Precontemplation
c. Preparation
d. Contemplation

Answers

Individuals who sporadically engage in physical activity without form, structure, or consistency are in the " Precontemplation" stage of change.
The correct answer is b.

Individuals in the pre-contemplation stage of the Transtheoretical Model of Behavior Change have no intention of changing their behavior in the near future.

They may be unaware of the need for change or may feel resigned to their current behavior. In terms of physical activity, individuals in this stage may engage in sporadic or irregular activity, but they are not yet considering making exercise a regular part of their lifestyle.

Therefore option b is correct.

Learn more about behavior:

https://brainly.com/question/1741474

#SPJ11

The following half-cells are available: Ag+ (aq, 1.0 M) | Ag(s), Zn2+(aq, 1.0 M) | Zn(s), Cu2+(aq, 1.0 M) | Cu(s), and Co2+(aq, 1.0 M) | Co(s). Linking any two half-cells makes a voltaic cell. Given four different half-cells, six voltaic cells are possible. These are labeled, for simplicity, Ag-Zn, Ag-Cu, Ag-Co, Zn-Cu, Zn-Co, and Cu-Co.
(a) In which of the voltaic cells does the copper electrode serve as the cathode? In which of the voltaic cells does the cobalt electrode serve as the anode?
(b) Which combination of half-cells generates the highest voltage? Which combination generates the lowest voltage?

Answers

(a) In the Ag-Cu voltaic cell, the copper electrode serves as the cathode since Cu2+ ions are reduced to Cu(s) on the copper electrode. In the Ag-Co voltaic cell, the cobalt electrode serves as the anode since Co(s) is oxidized to Co2+ ions.

(b) The highest voltage is generated by the Ag-Zn voltaic cell because the reduction potential of Ag+ is higher than that of Zn2+. The lowest voltage is generated by the Cu-Co voltaic cell because the reduction potential of Co2+ is higher than that of Cu2+.

A voltaic cell, also known as a galvanic cell, is an electrochemical cell that converts chemical energy into electrical energy. It consists of two half-cells, each containing an electrode and an electrolyte solution. The two half-cells are connected by a salt bridge or porous membrane to allow for ion flow between them. In a voltaic cell, a spontaneous redox reaction occurs, which generates an electric potential difference between the two electrodes. This potential difference drives the flow of electrons through an external circuit, which can be used to power devices or perform work.

Visit here to learn more about voltaic cell brainly.com/question/1370699

#SPJ11

Question of 12 What nuclide undergoes electron capture to produce 108Pd? A) 108 Rh B) 107 Ag C) 107Pd D) 108Ag E) 107Rh

Answers

The nuclide that undergoes electron capture to produce 108Pd is 108Ag (D) and A) 108 Rh. In this process, an electron from the atom's inner shell is captured by the nucleus, converting a proton into a neutron and resulting in the formation of 108Pd.

In electron capture, an electron is captured by the nucleus, combining with a proton to produce a neutron. This changes the atomic number of the nuclide, but not the mass number. So, in this case, a 108Rh nuclide undergoes electron capture to produce 108Pd, where the atomic number of Rh (45) is reduced by one to become the atomic number of Pd (46).

Learn more about electrons here: brainly.com/question/28977387

#SPJ11

write the identity of the missing nucleus for the following nuclear decay reaction: ?→5927co 0−1e

Answers

the identity of the missing nucleus in the nuclear decay reaction is 59₂₆Fe (Iron-59). The complete reaction is: 59₂₆Fe → 59₂₇Co + ₀₋₁e.

To find the missing nucleus for the nuclear decay reaction "?→59₂₇Co + ₀₋₁e," we can use the conservation of mass and atomic numbers.
Step 1: Identify the given values.
The given product nuclei are:
- 59₂₇Co (Cobalt-59), which has a mass number of 59 and an atomic number of 27
- ₀₋₁e (an electron or beta particle), which has a mass number of 0 and an atomic number of -1
Step 2: Apply the conservation laws.
The mass number and atomic number of the missing nucleus should be equal to the sum of the mass and atomic numbers of the product nuclei.
Missing nucleus mass number = 59 (from Co) + 0 (from e)
Missing nucleus mass number = 59
Missing nucleus atomic number = 27 (from Co) + (-1) (from e)
Missing nucleus atomic number = 26
Step 3: Identify the element with the calculated atomic number.
An atomic number of 26 corresponds to the element iron (Fe).
So, the identity of the missing nucleus in the nuclear decay reaction is 59₂₆Fe (Iron-59). The complete reaction is:59₂₆Fe → 59₂₇Co + ₀₋₁e.

To learn more about nuclear decay https://brainly.com/question/16677661

#SPJ11

Dawn is in a chemistry lab. She has container of a chemical. The chemical formula for the substance is on the label. Dawn measured a small portion of the mass on a balance beam. What will she need to do to find the number of moles in the substance?

Answers

Answer:

To find the number of moles of the substance, Dawn will need to know the molar mass of the substance. The molar mass is the mass of one mole of the substance, expressed in grams per mole (g/mol).

Dawn can calculate the number of moles of the substance using the following formula:

moles = mass / molar mass

Where mass is the measured mass of the substance in grams.

To find the molar mass of the substance, Dawn will need to look up the atomic masses of the elements in the chemical formula of the substance, and multiply them by the number of atoms of each element in the formula. Then, she can add up the results to get the molar mass of the substance in g/mol.

Once Dawn has calculated the molar mass of the substance and measured its mass, she can use the formula above to calculate the number of moles of the substance.

Hope this helps!

Place the following gases in order of increasing density at STP.
N2 NH3 N2O4 Kr
a. Kr < N2O4 < N2 < NH3
b. N2 < Kr < N2O4 < NH3
c. Kr < N2 < NH3 < N2O4
d. NH3 < N2 < Kr < N2O4
e. N2O4 < Kr < N2 < NH3

Answers

The gases in order of increasing density at STP are NH₃ < N₂ < Kr < N₂O₄. The correct answer is option d.

To place the given gases in order of increasing density at STP, we need to consider their molar masses, as density is directly proportional to molar mass at constant temperature and pressure. Here are the molar masses of the gases:
N₂: 28 g/mol
NH₃: 17 g/mol
N₂O₄: 92 g/mol
Kr: 83.8 g/mol

The density of a gas can be calculated using the ideal gas law:

PV = nRT

where P is the pressure of the gas, V is its volume, n is the number of moles of the gas, R is the ideal gas constant, and T is the temperature of the gas in kelvin.

Rearranging the ideal gas law, we get:

n/V = P/RT

The quantity n/V represents the molar density of the gas, which is the number of moles of gas per unit volume. Multiplying this quantity by the molar mass of the gas (M) gives the mass density of the gas (ρ):

ρ = (n/V) x M

Now, we can arrange them in order of increasing density:

NH₃ < N₂ < Kr < N₂O₄

Therefore option d is the correct answer.

Learn more about density:

https://brainly.com/question/1354972

#SPJ11

The table below contains the bond dissociation energies for common bonds.
Bond Dissociation energy
(kJ/mol )
C−C 350
C=C 611
C−H 410
C−O 350
C=O 799
O−O 180
O=O 498
H−O 460
Calculate the bond dissociation energy for the breaking of all the bonds in a mole of methane, CH4.

Answers

The bond dissociation energy for breaking all the bonds in a mole of methane (CH4) is 1640 kJ/mol.

To calculate the bond dissociation energy for breaking all the bonds in a mole of methane (CH4), you'll need to consider the bond dissociation energies for the C-H bond, which is provided in the table.

The methane molecule (CH4) has four C-H bonds. According to the table, the bond dissociation energy for a single C-H bond is 410 kJ/mol.

Step 1: Calculate the energy needed to break one molecule of methane by breaking all four C-H bonds:
Energy = 4 (C-H bonds) * 410 kJ/mol (bond dissociation energy for C-H)
Energy = 1640 kJ/mol

Step 2: Calculate the energy needed to break all the bonds in a mole of methane:
Energy = 1 mole of CH4 * 1640 kJ/mol

Therefore, the bond dissociation energy for breaking all the bonds in a mole of methane (CH4) is 1640 kJ/mol.

Learn more about bond dissociation energy at https://brainly.com/question/24301293

#SPJ11

solve for the ph of a solution that has 0.100 m hclo and 0.075 m naclo. ka (hclo) = 2.9 × 10−8

Answers

To solve for the pH of the solution, we need to use the Ka expression for HClO and set up an ICE table to determine the concentrations of H3O+ and ClO- in the solution.



Ka = [H3O+][ClO-]/[HClO], Let x be the concentration of H3O+ and ClO- formed from the dissociation of HClO.
Ka = x^2 / (0.100 - x).


Assuming x is much smaller than 0.100, we can simplify the denominator to 0.100, 2.9 × 10−8 = x^2 / 0.100



Solving for x, we get: x = 1.7 × 10−5 M
The concentration of H3O+ in the solution is the same as x, which is 1.7 × 10−5 M.


To determine the pH, we take the negative logarithm of the H3O+ concentration: pH = -log(1.7 × 10−5) = 4.77
Therefore, the pH of the solution with 0.100 M HClO and 0.075 M NaClO is 4.77.

To know more about concentrations click here

brainly.com/question/29072206

#SPJ11

are acids fine chemicals

Answers

Yes, acids can be considered as fine chemicals.

Are acids considered fine chemicals?

Yes, acids can be considered as fine chemicals. Fine chemicals are pure and complex chemical substances, produced in relatively small quantities with high purity and quality standards. Acids, such as sulfuric acid, hydrochloric acid, nitric acid, acetic acid and phosphoric acid are widely used in the chemical industry as intermediates or raw materials in the production of a wide range of fine chemicals.

Many acids are also used in various industrial processes, such as electroplating, etching, and metal cleaning. Therefore, acids play a crucial role in production of fine chemicals and are considered as essential class of chemicals in the chemical industry.

To know more about chemicals, refer

https://brainly.com/question/29886197

#SPJ1

Place the boxes in the numbered boxes, 1 through 8, according to the order in which these events occur. Myosin filaments continue to slide actin toward the M-line. Sodium ions enter the cell, initiating an action potential. Calcium binds to troponin, causing tropomyosin to move. Myosin binds to actin. Calcium ions are released from the sarcoplasmic reticulum.

Answers

1. Acetylocholine binds sodium channels that are activated by ligands.

2. When sodium ions get inside the cell, an action potential starts.

3. The sarcolemma and T tubules carry an action potential.

From the sarcoplasmic reticulum, calcium ions are released in step 4.

5. Because calcium and troponin are bound together, tropomyosin moves.

6. Actin is bound by myosin.

7. Using ATP energy, myosin cross-bridges swing and detach in alternating fashion.

Actin is still being moved towards the M-line by myosin filaments in position 8.

Muscle contractions are regulated by calcium ions, troponin and tropomyosin proteins, AND the act of skeletal muscles contracting.

To know more about troponin, click here:

https://brainly.com/question/30506716

#SPJ4

Predict the FINAL product for the following synthetic transformation: 1. EtONa (2 equiv), EtOH 2. Br,Br ____3. H2O+, H2O (axcess) _____ 4. heat -CO2 _____

Answers

The final product of the given synthetic transformation would be 2-ethyl-1-butene.

EtONa (2 equiv), EtOH - This step involves the deprotonation of ethanol by ethoxide ion, forming ethoxide anion. The ethoxide anion then reacts with another molecule of ethanol to form diethyl ether.Br, Br - In this step, the diethyl ether formed in step 1 is reacted with Br2 to form 2,2-dibromoethyl ethyl ether.H2O+, H2O (excess) - The 2,2-dibromoethyl ethyl ether obtained from step 2 is reacted with an excess of water in the presence of an acid catalyst to form 2-bromoethyl alcohol and ethanol.Heat -CO2 - The final step involves the elimination of HBr from 2-bromoethyl alcohol, which is achieved by heating the reaction mixture.

This step results in the formation of 2-ethyl-1-butene as the final product.

To know more about deprotonation click here:

https://brainly.com/question/30298709

#SPJ11

Other Questions
The bighorn sheep (Ovis canadensis) is a species of sheep native to North America named for its large horns. These horns can weigh up to 14 kg (30 lb), while the sheep themselves weigh up to 140 kg (300 lb). The sheep live in harems, groups of one male and multiple females. Populations of bighorn sheep have inhabited Alberta, Canada for thousands of years. In bighorn sheep, males fight each other by banging their large horns together and males that win these contests control harems of females. Horn size in males is primarily influenced by a gene called HRN. There are 2 alleles, H1 and H2. H1 produces larger horns and H2 produces small horns. The alleles show an incomplete dominance inheritance pattern. Scientists measured horn size of male sheep in a population of bighorn sheep in 1950.Focus on the evolution of the horn size in the Bighorn sheep population from 1950 to present. Is the variation for horn size heritable? How would we test for this?Yes, it is heritable. We could test this using breeding experiments between parents of known horn sizes and tracking horn sizes of offspring.Yes, it is heritable. We know it is heritable because there is variation for the trait of horn size. Yes, it is heritable. We could test for this by looking at the impact of food availability on horn size.No, it is not heritable. We could show this by using predictions made by a Punnett square.No, it is not heritable. We could show this in a test by finding that allele frequencies did not change over time. do the units you use to measure the volume of base effect your calculated value of k? why or why not? find a polynomial f(x) of degree 7 such that 2 and 2 are both zeros of multiplicity 2, 0 is a zero of multiplicity 3, and f(1) = 45. What are key geographic features that impact the four river valley civilizations ) find the formal charge on each of the atoms in the nitrate ion. (enter your answer using the format 1 and -2.) c=5.5b, where b is the number of dollar bills produced. If a mint produces atleast 420 dollar bills but not more than 425 dollar bills during a certain timeperiod, what is the domain of the function for this situation? Problem 53: Express the following in phasor form (in the rms sense). a. 20 sin (377t 180) b. 6 x 10-6 cos wt c. 3.6 x 10- cos (754t 20) A particular brand of diet margarine was analyzed to determine the level of polyunsaturated fatty acid (in percentages). A sample of six packages resulted in the following data:16.8,17.2,17.4,16.9,16.5,17.1.What is the level of confidence for values between 16.65 and17.32?90%99%85% Even though it might be hard to break free from habits that family members might have, it is possible.TrueFalseANSWER ASAP!! The graph of f(x) and table for g(x)= f(kx) are given.- WORTH 40 BRAINLY POINTS PLEASE ANSWER FASTThe graph shows an upward opening parabola labeled f of x that passes through a point negative 2 comma 8, a point negative 1 comma 2, a vertex 0 comma 0, a point 1 comma 2, and a point 2 comma 8.x g(x)6 83 20 03 26 8What is the value of k? k = 3 k is equal to one third k = 6 k is equal to negative one sixth A manufacturer of automobile batteries claims that the average length of life for its grade A battery is 60months. However, the guarantee on this brand is for just 36 months. Suppose the standard deviation ofthe life length is known to be 10 months, and the frequency distribution of the life-length data is knownto be mound-shaped (bell-shaped). A) Approximately what percentage of the manufacturers grade A batteries will last more than 50months, assuming the manufacturers claim is true?b) Approximately what percentage of the manufacturers batteries will last less than 40 months,assuming the manufacturers claim is true? Trichloroethylene (TCE, C2HCl3, species A) is an industrial solvent that has contaminated air, water, and soil at many sites in Oregon. At 30 oC, TCE is volatile liquid ( PA*= 0.12 atm vapor pressure) and is slightly soluble in water (1.28 kg TCE/m3dissolved in liquid water).(a)What is the molecular diffusion coefficient of TCE dissolved in liquid water at 30 oC?(b)What is the effective diffusion coefficient of TCEvaporin air within porous, compacted dry soil of void fraction of 0.40 and mean pore diameter of 5.0 micro m (1 cm = 10^4micron)at 30 oC and 1.0 atm?(c)What is the maximum solubility of TCE in liquid water, in terms of its mole fraction, xA? According the eText, what the philosopher Leon Kass calls the wisdom of repugnance is the argument that our "yuck" response gives us deeper insight into our human nature and should be heard. true or FALSE Some countries' philosophy of financial reporting differs from GAAP because their financial reports are required to conform to tax law.true/false tructorWatch the video and then answer the problem given below.Click here to watch the video.The circle graph represents a sample of 600 people who were asked which one automobile accessory they would mostprefer to have on a family trip. How many people indicated Bluetooth capability?peopleCEFFAutomobile Accessories for a Family Road TripBluetooth capability 29%Other 21%Clear allRoof rack 8%Extra cup holders 15%DVD player 27%Check answer Ultimately, changes in air pressure underlie the sense of: Select one: a. audition b. olfaction c. gustation d. vision Show that y=(2/3)e^x + e^-2x is a solution of the differential equation y' + 2y=2ex. when using 360-degree performance evaluation, in order to make this approach effective, the evaluation results should be always linked to pay raise or promotion decisions.(True/False) 3)what is the main idea behind vsepr theory? Grammar/Mechanics Checkup 8: Commas 3 The following questions will test your knowledge of comma usage. Identify the comma error(s), and choose the best revision.He completed three account audits; she, four. a. He completed three account audits; she four. b. No error c.He completed three account audits, she, four.