Answer:
soil formation, or pedogenesis
Explanation:
The process that begins with the physical and chemical weathering of rock and eventually leads to the formation of soil is called soil formation, or pedogenesis. Soil formation is a complex and dynamic process that involves the interactions of several different factors, including the physical and chemical properties of the rock, the climate and weather conditions, the organisms that live in the soil, and the topography and geology of the area.
The process of soil formation typically begins with the physical and chemical weathering of rock, which is the process by which rock is broken down into smaller pieces by the forces of nature. Physical weathering can occur through processes such as abrasion, where rocks are worn down by the action of wind, water, or ice. Chemical weathering, on the other hand, occurs when the chemical bonds in the rock are broken down by the action of water, oxygen, or other chemicals.
As the rock is broken down into smaller pieces, it begins to form a layer of loose, porous material called regolith. This layer of regolith is the foundation for the development of soil, and it provides the nutrients and minerals that plants and other organisms need to grow. Over time, the regolith is transformed into soil through the action of weathering, erosion, and the activities of living organisms, such as plants and animals.
The process of soil formation can take thousands of years, and it is constantly ongoing as new layers of rock are exposed to the forces of weathering and erosion. The resulting soil is a complex and diverse ecosystem, supporting a wide range of plants and animals, and it is an essential component of the Earth's natural environment.
How does the marine west coast climate in western europe differ from marine west coast climates in other parts of the world?.
hurricane season for the atlantic ocean lasts from june to november. which factor makes an atlantic hurricane less likely to form during the month of march?
Cool ocean water makes Atlantic hurricane less likely to form during month of march.
What is an Atlantic hurricane?An Atlantic hurricane, also referred to as a tropical storm or just a hurricane, is a tropical cyclone that develops in the Atlantic Ocean, usually between the months of June and November. Only the location of a hurricane distinguishes it from a cyclone or typhoon. Typhoons form in the northwestern Pacific Ocean, hurricanes form in the Atlantic Ocean and northeastern Pacific Ocean, and cyclones form in the South Pacific Ocean or Indian Ocean. The intensity of tropical cyclones can be categorized. Hurricanes have one-minute maximum sustained winds greater than 74 mph (64 knots, 33 m/s, 119 km/h), while tropical storms have one-minute maximum sustained winds of at least 39 mph (34 knots, 17 m/s, 63 km/h).
To learn more about hurricane, visit:
https://brainly.com/question/28421573
#SPJ4
In a simplified model of a city, the zone where retail and office activities are clustered is the.
In a simplified city model, the central business district is the area where businesses like stores and offices are concentrated.
What is the Central Business District?The central business district (CBD) is where the majority of the city's services are concentrated. Services are attracted to the CBD because of its accessibility, usually close to the site of the initial settlement. The core business center of older cities is typically situated next to a body of water.
Where is a central business district often located?The main commercial area of a municipality is typically found in the downtown or city center. This helps to make sure that those who live and work in the city have a handy location for the CBD.
The importance of the Central Business DistrictThe success of a local and regional economy, the transportation of products and people, the life and culture of cities, and many other intersecting issues are all impacted by the central business district, also known as the CBD or its abbreviation. As a result, the central business district is a key term in planning.
Learn more about central business district: https://brainly.com/question/29372761
#SPJ4
In rwanda, there are more young children than teenagers, and more teenagers than adults. This age structure indicates a population that.
In Rwanda, there are more young children than teenagers, and more teenagers than adults. This age structure indicates a population that Will double in 30 years
While declining population frequently have more modest level of individuals in these age gatherings, developing populaces ordinarily have higher extents of individuals in more youthful age gatherings. Populaces that are steady normally have a higher extent of individuals in conceptive age gatherings.
The world's populaces are maturing because of declining rates of birth and increasing future. Because of this segment shift, the level of people beyond 60 years old has expanded.
More individuals will live longer on account of expanded admittance to sufficient lodging, supporting food, and medical services, which is the most clear benefit of a maturing populace.
Know more about population growth - https://brainly.com/question/27779235
#SPJ4
What were two factors that contributed to the end of the open range on the western frontier?
Barbed wire and windmills brought about the closing of the once-open range.
With the invention of barbed wire, rangelands were enclosed, cattle drives ended, and a new way of moving cattle to emerge markets was introduced.
The success of the ranching industry also created unexpected issues. As more ranchers moved into Texas, the range became crowded. The Grazing pastures could not support the growing number of cattle.
Ranchers tried to keep track of their cattle and separate them from other herds, but this proved to be difficult. Also, farmers moved on to the range after Native Americans were confined to reservations.
They farmed on the same lands the cattle needed to roam. A conflict over the use of the land was unavoidable.
Before the invention of barbed wire, cattle fences were made of wood, thorn bushes, mud, or rocks. But, in the 1870s, the cattle industry spread onto the treeless Great Plains.
To know more about the End of open range:
https://brainly.com/question/4917526
In which african ecosystem would you most likely find giraffes, zebras, and lions in a grassland habitat? a. The tundra b. The tropical rainforest c. The desert d. The savanna please select the best answer from the choices provided. A b c d.
In the Savanna Region of African Ecosystem we find most likely giraffes, zebras, and lions in a grassland habitat. The option D Savanna.
The Savanna Region is also known as African Savannas where most of the herbivorous animal live because most of the region is covered with grasslands. Herbivorous are the animals who depends on plants, grass.
So that we find animals like Giraffes, Zebras, Buffalos in this region Zebras found in treeless grassland doesn't survive in deserts rainforests. Giraffes found in open savanna region and carnivorous animals like lions,cheetahs', hyenas also live in this region as they depend on herbivorous.
To learn more about Ecosystem:https://brainly.com/question/1514975
How is the culture of Ireland different from the cultures of the rest of the British isles?
The Ireland and the rest of the British Isles are culturally similar but not same. The Irish are natively different to the majority of English. They hereditary Irish culture center around mythology of the Island while the English culture tends to center around the history of their old knights and kings and the battles fought. .They also have different history.
What is cultural differenceCultural differences is the different in behaviors, beliefs, customs, traditions, language and expressions that are characterize by a groups of people of a particular country, race, ethnic or origin .Cultural differences impact how people from different countries, co-exist or interact and socialize in meetings.
Learn more about Cultural Difference here: brainly.com/question/8906148
#SPJ1
hurricane season for the atlantic ocean lasts from june to november. which factor makes an atlantic hurricane less likely to form during the month of march?
The ocean is cold. Because a storm formed over water, its wind speed drops when it crosses land.
What are the two components of the oceans that work together to create storms with such strong winds?The hot, rising air of the storms contains ocean water vapor. When the vapor condenses into clouds, heat is released, warming the cornea and causing more surface water to evaporate, keeping the cycle running. The humidity and temperature of the air are other crucial factors.
What would happen if a hurricane crossed land or a body of cold water?As these storms travel across land or frigid water and are cut off from the hot water that fuels them, they become weaker and eventually evaporate. Recent studies have shown a correlation between the strength of tropical storms and ocean surface temperatures, with stronger storms being fueled by warmer waters.
Learn more about hurricane: https://brainly.com/question/13661501
#SPJ4
a dam is constructed to prevent seasonal flooding that typically occurs in an area. what might be expected to occur along the shorelines downstream of the dam?
The dam is built to stop seasonal flooding that frequently happens in a place. It is possible to anticipate a decline in species richness along the shorelines downstream of the dam.
How can a dam help to lower the risk of flooding?Because material cannot travel downstream, dams release relatively pure water, which erodes the riverbed more thoroughly. The channel can now carry more water thanks to this cut, which also prevents floodwaters from spilling the riverbanks.
Why are dams necessary, and what good and negative effects might they have on the ecosystem?Dams function as flood barriers, renewable energy sources, and water reservoirs. Sadly, they also increase the harm caused by climate change. They uproot low-income neighborhoods, create greenhouse gases, destroy carbon sinks in wetlands and oceans, deplete ecosystems of nutrients, harm ecosystems, and cause other harm.
Learn more about dams: https://brainly.com/question/6592407
#SPJ4
What are the 4 reasons for sparse settlement in the Great Plains & Intermountain West?
Answer: The Great Plains are a large plateau featuring grassland, prairie, mountains, hills, and valleys, depending on what part of the Plains you are on.
Explanation: The plains are wide, flat stretches of land. They are not more than 200 metres above the mean sea level. Usually, plains are very fertile. Hence, these plains are parts of the earth which are very densely populated.
Explain how the same rock layer might exist at different elevations in different locations.
Answer:
Geologists can use index fossils to match rock layers in different areas.
Explanation:
Geologists can use index fossils to match rock layers in different areas is the same rock layer might exist at different elevations in different locations.
What is Geologists?Geologists research the components, operations, outcomes, physical characteristics, and past of the planet. Geomorphologists examine the landforms and landscapes of the planet in relation to the geology, climatic, and human processes that have shaped them.
The exploration and production of natural resources, such as petroleum, entail a large number of geoscientists. Others are engaged in cleanup and reclaiming land efforts as well as environmental conservation and preservation work. Some focus on a specific area of the Earth, such its oceans.
Geologists travel to do on-site work, create research plans, and complete assignments. They observe, collect, and test liquid, mineral, soil, and rock samples both within and outside of laboratories.
Thus, Geologists can use index fossils to match rock layers in different areas.
For more information about Geologists, click here:
https://brainly.com/question/13428729
#SPJ2
Find the surface area and volume of the sphere. Round your answers to the nearest whole number.
The formula for the surface area of a sphere is:
Surface area = 4 * pi * r^2
The formula for the volume of a sphere is:
Volume = (4/3) * pi * r^3
What are the surface area and volume of the sphere.?Generally, To find the surface area and volume of a sphere, you will need to know the radius of the sphere. The radius is the distance from the center of the sphere to the surface.
The formula for the surface area of a sphere is:
Surface area = 4 * pi * r^2
where r is the radius of the sphere and pi is a mathematical constant approximately equal to 3.14.
The formula for the volume of a sphere is:
Volume = (4/3) * pi * r^3
To find the surface area and volume of a sphere with a given radius, simply substitute the value of the radius into the appropriate formula and solve.
For example, if the radius of the sphere is 5, the surface area would be:
Surface area = 4 * pi * 5^2 = 100 * pi = approximately 314 square units
And the volume would be:
Volume = (4/3) * pi * 5^3 = (4/3) * pi * 125 = approximately 523 cubic units.
Read more about the surface area and volume of the sphere.
https://brainly.com/question/16415229
#SPJ1
CQ not found
hurricane season for the atlantic ocean lasts from june to november. which factor makes an atlantic hurricane less likely to form during the month of march?
From June to November, the Atlantic Ocean experiences a hurricane season. March is a less likely month for an Atlantic hurricane because of the low water temperatures. A storm's wind speed decreases as it moves across land because it develops over water.
Why do hurricanes form between June and November?Hurricanes form in the warmest regions of the ocean. Every year from June 1 to November 30 there is a hurricane season in the Atlantic Ocean that lasts for the duration of the summer and fall. The storm season may be extended due to the warmer ocean surface caused by our changing climate.
Hurricanes form in the warmest regions of the ocean. A hurricane season runs from June 1 to November 30 each year in the Atlantic Ocean. The lengthening of the storm season could be a result of the warming of the ocean surface caused by climate change.
Although the Atlantic basin's official hurricane season runs from June 1 to November 30, there are sporadic instances where tropical cyclone activity might occur before or beyond that date. From mid-August to mid-October, when it peaks on September 10, the Atlantic hurricane season reaches its height.
Learn more about hurricane season: https://brainly.com/question/29693884
#SPJ4
how would you describe the composition of this rock? (hint: this rock contains primarily plagioclase feldspar and pyroxene)
Almost all rocks are minerals, but different rocks contain different mixtures of minerals. There are three main groups of rocks: sedimentary, igneous and metamorphic rocks.
Members of the plagioclase group are the most common rock-forming minerals. They are important for most of the dominant minerals in the igneous rocks of the earth's crust. They are the main components of many intrusive and extrusive igneous rocks, including granite, diorite, gabbro, rhyolite, andesite, and basalt. Rocks that contain many dark silicate materials and plagioclase in feldspar are basaltic in composition. Basalt rock contains minerals of the pyroxene group, which give the minerals their dark color.
It can be as light as dark green or as dark as black. Plagioclase (feldspar) is widespread and common in many igneous and metamorphic rocks, and to a much lesser extent in some immature sedimentary rocks. In general, the keys to identifying plagioclase are its absence (color), low birefringence, and twinning.
Learn about rock:
https://brainly.com/question/26046551
#SPJ4
A cylindrical pillar is 50 cm in diameter and 350 cm in height. Find the cost of painting the curved surface of the pillar at the rate of $12.50 per cm².
The cost of painting the curved surface of the pillar at the rate of $12.50 per cm² is $543,750.
What is curved surface area?Curved surface area (CSA) is the total area of all the curved surfaces of a three-dimensional object. It is different from the object's total surface area, which includes both curved and flat surfaces. CSA is important in determining the amount of material needed to cover a curved object and can be calculated from the object's surface area and total surface area. For example, a sphere has a total surface area of 4πr², but its curved surface area is 4πr², since the entire surface is curved.
The total area of the curved surface of the cylinder is given by A = 2πrh, where r is the radius and h is the height.
Therefore, the area of the curved surface of the cylinder is A = 2π(25 cm)(350 cm) = 43500 cm².
The cost of painting the curved surface of the pillar is then $12.50 per cm² x 43500 cm² = $543,750.
It can be concluded that the cost of painting the curved surface of the pillar at the rate of $12.50 per cm² is $543,750.
To know more about curved surface area, check this link:
https://brainly.com/question/23426060
#SPJ1
To what extent are the factors that caused urbanization in Canada the same as those in the developing world? Explain both similarities and difference’s
Answer:
The factors that caused urbanization in Canada are similar to those in the developing world in some ways, but there are also significant differences. Urbanization is the process by which an increasing proportion of a population lives in cities, and it is driven by a range of economic, social, and environmental factors.
One of the key factors that caused urbanization in Canada and in the developing world is the growth of the economy and the expansion of job opportunities in cities. In Canada, the growth of the industrial sector in the 19th and 20th centuries led to the creation of many new jobs in cities, and this attracted large numbers of people from rural areas and other countries. Similarly, in the developing world, the growth of the manufacturing, service, and technology sectors has created many new jobs in cities, and this has attracted many people from rural areas and other countries.
Another factor that has contributed to urbanization in Canada and in the developing world is the availability of infrastructure and services in cities. In Canada, cities have developed a range of infrastructure and services, such as transportation networks, schools, hospitals, and utilities, which have made them attractive places to live and work. Similarly, in the developing world, cities have invested in infrastructure and services, such as roads, ports, airports, and telecommunications networks, which have made them more attractive to businesses and investors.
However, there are also significant differences between the factors that caused urbanization in Canada and in the developing world. In Canada, urbanization has been largely driven by internal factors, such as the growth of the economy and the availability of infrastructure and services, whereas in the developing world, urbanization has often been driven by external factors, such as migration and colonization.
In addition, the urbanization process in Canada has generally been more gradual and orderly than in the developing world, where urbanization has often been characterized by rapid and uncontrolled growth, leading to problems such as overcrowding, pollution, and inequality.
Overall, the factors that caused urbanization in Canada are similar to those in the developing world in some ways, but there are also significant differences, such as the role of external factors and the pace and pattern of urbanization.
Cara wants to build an 80 foot long rectangular sheep pen in back of her barn. If she bought 180 feet of fencing and used her barn wall as one side of the pen equaling the width, what would be the area of the sheep pen?.
The area of the sheep enclosure would be 1600 square feet if Cara were to construct an 80 foot long, rectangular sheep pen behind her barn.
Rectangles are enclosed 2-D shapes with four sides, four corners, and four right angles. Equal and parallel opposite sides make up a rectangle. Being a two-dimensional form, a rectangle has length and breadth as its two dimensions.
When determining the area of a rectangle, we multiply its length by its width, as in Area = length x width.
The sheep pen is 80 feet long.
180 feet of fencing I bought
A barn covering the length and width of one side of a rectangular sheep enclosure
2 (length + width) is the perimeter of a rectangular sheep corral.
2 lengths plus 1 width must be covered in length.
180 = 2 length plus breadth
180 = 2 x 80 plus width
180-160= width
20= width
80 x 20 is the rectangle's area.
1.6 square meters
Know more about equal here:
https://brainly.com/question/17198465?
#SPJ4
One of the two main sects of islam is
A orthodox
B sufi
C Sunni
B brahman
Answer: C) Sunni
Explanation: Sunni and Shia are the two largest sects of Islam. The Sunni is much larger. Most adherents of Shia Islam live in Iran, but there are also large Shia.
What explanation does science give about how the mouflon found on an island in the indian ocean were able to maintain their genetic diversity under extraordinary circumstances? << read less.
The Mouflon are a type of Sheep commonly found in the Mediterranean Island region.
A geneticist known as David Coltman checked out concentrating on them and found that the hereditary variety has been kept up with over the course of the years regardless of the multitude of horrible circumstances the species has been exposed to.
The Mouflon keeping up with the hereditary variety implies that normal determination addresses one of the centers of transformative cycles in living beings. At the point when populaces are decisively decreased in size, the hypothesis of hereditary float proposes that a deficiency of hereditary variety ought not out of the ordinary. On account of the Mouflon, be that as it may, no such misfortune in variety was noticed. This outcome was very astonishing for researchers since it meant that the theory of genetic drift does not always hold true.
Know more about Mouflon - https://brainly.com/question/3621163
#SPJ4
Since they are small and have a selective advantage over larger plants, stone walls, fences, and cracks in exposed rocks are ideal microhabitats for.
Since they are small and have a selective advantage over larger plants, stone walls, fences, and cracks in exposed rocks are ideal microhabitats for mosses.
Moss will become basically anyplace that has sufficient water, whether it's trees, fallen logs, roots, walls, structures or shakes. However, trees offer different advantages to help greeneries colonize and thrive. Tree rind is unpleasant and sporadic, and these breaks and cleft give safeguarded miniature natural surroundings
The stems are powerless and detached, and are typically greenish to brown shaded. It repeats by spores (since no seeds are found). The sporophytes are fleeting and have long, unbranched stems. They are generally subject to the gametophyte for water and nourishment.
Mosses capability like wipes, utilizing their narrow spaces to hold tight to water. They help to absorb precipitation, keep up with dampness in the dirt beneath and keep conditions around them sticky. This empowers different plants around them flourish, for example, in natural surroundings like swamps and forest.
Know more about Mosses - https://brainly.com/question/10508599
#SPJ4
Why would farmers in the united states be especially concerned about a decrease in groundwater?.
a local gardener puts fertilizer on his plants. the plants are very healthy, but what is a negative effect the fertilizers have on the environment?
Answer:
While fertilizers can be beneficial for plants and help them grow, they can also have negative effects on the environment. One of the main concerns with the use of fertilizers is that they can leach into nearby water sources, such as rivers and streams, and cause an excess of nutrients in the water. This can lead to the growth of harmful algae and other aquatic plants, which can deplete the water of oxygen and kill fish and other aquatic life. Additionally, fertilizers can also release harmful pollutants into the air, such as nitrogen oxides, which can contribute to air pollution and damage the ozone layer. Therefore, it is important to use fertilizers responsibly and follow the instructions on the packaging to avoid any negative effects on the environment.
The populations of countries around the world are __________.
A.
increasing and decreasing
B.
all increasing at different rates
C.
all decreasing at different rates
D.
increasing at the same rates
The populations of countries around the world are increasing and decreasing. Option A
What are populations?Generally, The term "population" is most commonly used to refer to the total number of people living in a particular location, such as a city or town, region, country, continent, or the entire world.
The complete quantity of individuals occupying an area or contributing to a whole: the overall number of particles existing at a particular energy level used in particular atoms when referring to a laser.
Read more about populations
https://brainly.com/question/27991860
#SPJ1
Which of the following statements describes a centrifugal force?
Question 1 options:
The Canadian government plans to construct a national railroad system that will connect all provinces and territories.
The British Museum funds a traveling exhibition of the Royal crown throughout the United Kingdom for citizens who cannot travel to London for the exhibit.
Ethnic Burmans control the central territory and political capital in Myanmar while the less powerful ethnic groups are marginalized in the border regions.
Schoolchildren in Australia learn the history, values, and traditions of their country.
Most of the citizens in Nepal follow the tenets of Hinduism, the state religion in their country
Ethnic Burmans control the central territory and political capital in Myanmar while the less powerful ethnic groups are marginalized in the border regions describes a centrifugal force.
What is a centrifugal force?A centrifugal force is a term used in human geography to describe factors that split up political and ethnic groups. Racism, nationalism, and notions that one group is distinct or "other" are examples of centrifugal forces that divide or draw people apart.
There are centrifugal forces that separate people and centripetal ones that unite them. These factors can prevent interaction, fostering regionalism and dividing a nation's population.
Hence, option C is an appropriate response.
To learn more about centrifugal force
https://brainly.com/question/4669833
#SPJ1
An earthquake that measures 8 on the richter scale would be how many times stronger than an earthquake that measures 4 on the same scale?
Answer:
10,000 times stronger
Explanation:
An earthquake that measures 8 on the Richter scale would be 10,000 times stronger than an earthquake that measures 4 on the same scale. The Richter scale is a logarithmic scale, which means that each increment on the scale represents a tenfold increase in the amplitude of the earthquake's waves. So, an earthquake that measures 8 on the Richter scale would have waves that are 10,000 times more powerful than those of an earthquake that measures 4 on the scale.
HELPPP Which parts of the following image illustrate a central concept related to cultural cohesion?
George Washington because he was an admiral in the American navy and the image shows his power
Betsy Ross because she is a wealthy person with a big house, which shows uneven development between upper and lower classes
The original flag said to be sewn by Betsy Ross because it is part of the iconography related to the United States
The children because they are reciting the pledge of allegiance to the flag to show to the soldiers what they learned in school
The soldiers because they are seen in full military dress, meaning they are on their way to a parade
The original flag sewn by Betsy Ross represents cultural cohesion and serves as a symbol of American values and identity.
The part of the image that illustrates a central concept related to cultural cohesion is the original flag said to be sewn by Betsy Ross because it represents the historical and cultural significance of the United States.
It serves as a symbol of the country's values and ideals, such as freedom, democracy, and unity.
The flag is an important part of American identity, and its history is closely tied to the country's development and evolution.
By celebrating and honoring this iconography, people can feel a sense of connection and belonging to their shared cultural heritage, fostering a greater sense of cohesion and unity among citizens.
To know more about the cultural cohesion, visit:
https://brainly.com/question/9884368
#SPJ1
which zone is generated in coastal sediments bring nutrients to the middle layers of the ocean, sandwiched between the upper and lower oxygenated layers?
The zone is generated in coastal sediments bring nutrients to the middle layers of the ocean, sandwiched between the upper and lower oxygenated layers the oxygen minimum zone.
The oxygen minimum zone is growing for what reason?Oxygen minimum zones (OMZs) are areas of the ocean that lack oxygen and are currently growing as a result of the warming of the water column brought on by anthropogenic climate change.
What is and how does an oxygen minimum zone form?Oxygen minimum zones are areas with low midwater oxygen concentrations and high levels of dissolved inorganic carbon (DIC), which are caused by a combination of high primary productivity at the surface and local hydrography.
Quiz: What is the location of the oxygen minimum zone?The ocean's surface is far from where the oxygen minimum layer forms. Photosynthesis cannot occur without light, and atmospheric mixing cannot occur. Additionally, oxygen is constantly being depleted by processes like respiration and decomposition.
To Know more about minimum zone.
https://brainly.com/question/28115205
#SPJ4
power plants use to create steam to drive turbines that generate , but they also use the same resource for cooling.
Power plants use water to create steam to drive turbines that generate electricity, but they also use the same resource for cooling.
What is a power plant?Power plants can be defined as installations where the energy from a given energy source is converted into electrical use for home and industrialized consumption.
Therefore, with this data, we can see that a given power plant generates electrical energy by moving turbines, which requires a source of energy such as hydroelectric or nuclear energy, and the water used to move turbines is also required to cool the device during this overall process.
Complete question:
Fill in the blank spaces.
Power plants use _____ to create steam to drive turbines that generate _____, but they also use the same resource for cooling.
Learn more about power plants here:
https://brainly.com/question/16064039
#SPJ1
Information from which evidence led scientists to believe that the continents were parts of larger plates?.
Information obtained from this evidence led scientists to believe that the continents were parts of larger plates: mid-ocean ridges and earthquakes.
Mid-ocean ridge - In the center of an ocean basin, a mid-ocean ridge is a long, linear, seismically active seabed mountain range that was often created by plate tectonics as a result of molten magma eruptions.
An earthquake - An earthquake is described as a rapid, natural shaking of the ground that happens as a result of repeated movement in the upper mantle and crust of the Earth (lithosphere), which normally generates some seismic waves.
The fact that earthquakes and mid-ocean ridges are both components of bigger plates means that they are both characteristics of the Earth's crust that either directly or indirectly affect the different continents of the planet Earth.
In conclusion, mid-ocean ridges and earthquakes led scientists to hypothesize that the continents were fragments of bigger plates.
For more info about 'mid-ocean ridges' click on below link - https://brainly.com/question/7666628
#SPJ4
Which part of a tidal power plant is the tidal water pushed through to generate electricity?.
In tidal power plants, turbines are used to produce electricity.
To produce electricity, tidal power plants use the kinetic energy of moving water. One of the sources of energy that is renewable is this one.
The tidal power plant's turbine is a component that produces electricity. Where there is a particularly high tidal flow, it is kept on the ocean floor. In contrast to wind turbines, the turbines used in tidal power plants are quite expensive.
As a result, "turbine" is the appropriate choice.
For more info about 'Tidal power plants' click on below link - https://brainly.com/question/2684879
#SPJ4