The maximum current delivered by an AC source with a peak voltage of 46.0 V and a frequency of 100.0 Hz, when connected across a 3.70-4F capacitor, can be calculated. The maximum current is found to be approximately 12.43 mA.
The relationship between the current (I), voltage (V), and capacitance (C) in an AC circuit is given by the formula I = CVω, where ω is the angular frequency. The angular frequency (ω) can be calculated using the formula ω = 2πf, where f is the frequency.
Given that the peak voltage (Vmax) is 46.0 V and the frequency (f) is 100.0 Hz, we can calculate the angular frequency (ω = 2πf) and then substitute the values into the formula I = CVω to find the maximum current (I).
To incorporate the capacitance (C), we need to convert it to Farads. The given capacitance of 3.70-4F can be written as 3.70 × 10^(-4) F.
Substituting the values into the formula I = CVω, we can calculate the maximum current.
After performing the calculations, the maximum current delivered by the AC source across the 3.70-4F capacitor is found to be approximately 12.43 mA.
Learn more about angular frequency here:
https://brainly.com/question/32670038
#SPJ11
The intensity of a certain sound wave is 5.42 W/m2. If its intensity is raised by 12.4 decibels, the new intensity (in W/m2)
The intensity of a sound wave is given as 5.42 W/m².
If its intensity is raised by 12.4 decibels, we are to find the new intensity of the sound wave in W/m².
Formula relating intensity and decibel is; dB = 10 log (I/I₀)⇒ I/I₀ = antilog (dB/10)Where, I₀ is the threshold of hearing. Sound intensity ratio in (dB) = 12.4So, new intensity = I = I₀ antilog (dB/10) = 1 x antilog (12.4/10)W/m².
Therefore, new intensity = 1.5 x 5.42 W/m² = 8.13 W/m².Hence, the new intensity (in W/m²) is 8.13 W/m².
Learn more on intensity here:
brainly.in/question/9271745
#SPJ11
A circuit consists of a copper wire of length 10 m and radius 1 mm. The wire is connected to a 10−V battery. An aluminum wire of radius 0.50 mm is connected to the same battery and dissipates the same amount of power. What is the length of the aluminum wire?
Therefore, the length of the aluminum wire is approximately 18.7 m.
A copper wire of length 10 m and radius 1 mm is connected to a 10 V battery. An aluminum wire of radius 0.50 mm is connected to the same battery and dissipates the same amount of power. We need to find the length of the aluminum wire. Using the formula for resistance, the resistance of the copper wire can be calculated as: R = (ρl)/AR = (1.68 × 10^-8 × 10) / [π × (1 × 10^-3)^2]R = 0.53 ΩUsing the same formula, the resistance of the aluminum wire can be calculated as:0.53 Ω = (2.82 × 10^-8 × l) / [π × (0.5 × 10^-3)^2]l = (0.53 × π × (0.5 × 10^-3)^2) / (2.82 × 10^-8)l ≈ 18.7 m. Therefore, the length of the aluminum wire is approximately 18.7 m.
To know more about copper visit:
https://brainly.com/question/15314334
#SPJ11
A car is moving across a level highway with a speed of 22.9 m/s. The brakes are applied and the wheels become locked as the 1260-kg car skids to a stop. The braking distance is 126 meters. What is the initial energy of the car? _______ J
What is the final energy of the car? ________J How much work was done by the brakes to stop the car? ________J (make sure you include the correct sign) Determine the magnitude (enter your answer as a positive answer) of the braking force acting upon the car. _________ N
A car is moving across a level highway with a speed of 22.9 m/s. The brakes are applied and the wheels become locked as the 1260-kg car skids to a stop. The braking distance is 126 meters.
Velocity of car, v = 22.9 m/s Mass of car, m = 1260 kg Braking distance, s = 126 m
The initial energy of the car can be calculated as:
Initial Kinetic Energy of the car = 1/2 mv²
Here, m = 1260 kg, v = 22.9 m/s
Putting these values in the above formula: Initial Kinetic Energy = 1/2 × 1260 kg × (22.9 m/s)²= 1/2 × 1260 kg × 524.41 m²/s²= 165748.1 J
The final energy of the car is zero as the car is at rest now. Work done by the brakes to stop the car can be calculated as follows:
Work Done = Change in Kinetic Energy= Final Kinetic Energy - Initial Kinetic Energy
The final kinetic energy of the car is zero. Therefore, Work Done = 0 - 165748.1 J= -165748.1 J (Negative sign indicates the energy is lost by the car during the application of brakes)
The magnitude of the braking force acting upon the car can be calculated using the work-energy principle. The work done by the brakes is equal to the net work done by the forces acting on the car. Therefore,
Work Done by Brakes = Force x Distance
The frictional force acting on the car is equal to the force applied by the brakes. Hence,
Force = Frictional force acting on the car. The work done by the frictional force can be calculated as follows:
Work Done = Frictional force x Distance
Therefore, Frictional force acting on the car = Work Done / Distance= -165748.1 J / 126 m= -1314.6 N (The negative sign indicates that the force acts opposite to the direction of motion of the car. The magnitude of the force is 1314.6 N.)
Therefore, Initial Energy of the car = 165748.1 J
Final Energy of the car = 0 J
Work done by the brakes to stop the car = -165748.1 J
Magnitude of the braking force acting upon the car = 1314.6 N
Learn more about Kinetic energy: https://brainly.com/question/8101588
#SPJ11
A car travels in a straight line along a road. Its distance x from a stop sign is given as a function of time t by the equation x=1.4t²−8.8t³ (SI units). Calculate the distance of the car when it achieves its maximum speed in the positive x direction.
The distance traveled by the car when it achieves its maximum speed in the positive x direction is approximately 0.0016 kilometers.
Distance function: x = 1.4t² - 8.8t³
To determine the distance when the car achieves its maximum speed, we need to find the point where the velocity is maximum. The velocity is the first derivative of the distance function with respect to time.
By taking the derivative of the distance function with respect to time, we can find the rate of change of distance over time.
dx/dt = 2.8t - 26.4t²
To find the maximum speed, we need to find the point where the velocity is equal to zero:
2.8t - 26.4t² = 0
Simplifying the equation, we have:
t(2.8 - 26.4t) = 0
This equation has two solutions: t = 0 and t = 0.1061 seconds. Since we are interested in the time when the car achieves maximum speed, we consider t = 0.1061 seconds.
Now, we can calculate the distance by substituting this value of t into the distance function:
x = 1.4(0.1061)² - 8.8(0.1061)³
x ≈ 0.0016 kilometers
Therefore, the distance traveled by the car when it achieves its maximum speed in the positive x direction is approximately 0.0016 kilometers.
Learn more about distance at: https://brainly.com/question/26550516
#SPJ11
A thermometer having first-order model is initially placed in a liquid at 100 C. At time t=0, It is suddenly placed in
another tank with the same liquid at a temperature of 110 °C. The time constant of the thermometer is 1 min. Calculate
the thermometer reading () at t= 0.5 min, and (1) at t = 2 min.
The thermometer reading at t = 2 min is 108.65 °C.
Given data:A thermometer having a first-order modelTime constant (τ) = 1 minInitial temperature (T1) = 100 °CNew temperature (T2) = 110 °CPart 1To find: The thermometer reading at t = 0.5 minFormula used:Thermometer reading = T2 - (T2 - T1) * e^(-t/τ)Calculation:At t = 0, the thermometer is placed in a liquid at 100 °C. Hence, the thermometer reading = 100 °C.At t = 0.5 min,T2 = 110 °C, T1 = 100 °C, t = 0.5 min and τ = 1 minThermometer reading = T2 - (T2 - T1) * e^(-t/τ)= 110 - (110 - 100) * e^(-0.5/1)= 110 - 10 * e^(-0.5)= 110 - 10 * 0.606= 104.04 °C.
Therefore, the thermometer reading at t = 0.5 min is 104.04 °C.Part 2To find: The thermometer reading at t = 2 minFormula used:Thermometer reading = T2 - (T2 - T1) * e^(-t/τ)Calculation:At t = 0, the thermometer is placed in a liquid at 100 °C. Hence, the thermometer reading = 100 °C.At t = 2 min,T2 = 110 °C, T1 = 100 °C, t = 2 min and τ = 1 minThermometer reading = T2 - (T2 - T1) * e^(-t/τ)= 110 - (110 - 100) * e^(-2/1)= 110 - 10 * e^(-2)= 110 - 10 * 0.135= 108.65 °CTherefore, the thermometer reading at t = 2 min is 108.65 °C.
Learn more about Thermometer here,
https://brainly.com/question/2339046
#SPJ11
The change in enthalpy will always be negative under which conditions? A. The change in enthalpy actually can never be negative B. The internal energy increases and the volume increases C. The internal energy decreases and the volume increases D. The internal energy decreases and the volume decreases E. The internal energy increases and the volume decreases
Answer: The change in enthalpy will always be negative under which conditions is given by the option D.
The change in enthalpy will always be negative under the following conditions: The internal energy decreases and the volume decreases. The change in enthalpy will always be negative under which conditions is given by the option D.
The internal energy decreases and the volume decreases. Entropy is used to measure the energy that is not available to do work. In chemistry, changes in enthalpy are a measure of heat flow into or out of a system during chemical reactions or phase transitions such as melting or boiling.
Enthalpy (H) is defined as the sum of the internal energy (U) and the product of pressure (P) and volume (V).H = U + PVWhen enthalpy increases, a reaction or process absorbs heat from the surroundings. Conversely, when enthalpy decreases, a reaction or process releases heat into the surroundings.
Hence, The change in enthalpy will always be negative under the following conditions: The internal energy decreases and the volume decreases.
Learn more about internal energy: https://brainly.com/question/25748529
#SPJ11
Mary is an avid game show fan and one of the contestants on a popular game show. She spins the wheel and after 1.5 revolutions, the wheel comes to rest on a space that has a $1,500.00 prize. If the Initial angular speed of the wheel is 3.20 rad/s, find the angle through which the wheel has turned when the angular speed is 1.60rad/s. _________________
First consider the one-and-one-half revolutions to find the angular acceleration of the wheel. rev
Answer: the wheel has turned through an angle of 6.74 radians when the angular speed is 1.60 rad/s.
Here's a step by step explanation :
Step 1: Let's find the angular acceleration of the wheel using the first condition. I
ω1 = 3.20 rad/s.
Number of revolutions = 1.5 revolutions.
Time taken to complete 1.5 revolutions, t = 1.5 x 1/f = 1.5 x 1/T
where f = frequency = 1/T (T = time period).
Now, the wheel rotates 1 revolution in T seconds and rotates 1.5 revolutions in 1.5T seconds. Taking time for 1 revolution, T = 1/f
Initial angular displacement, θ1 = (1.5 revolutions) x (2π radians/revolution) = 3π radians.
Final angular displacement, θ2 = 0 rad. The angular acceleration of the wheel: ω2 = ω1 + αtθ2 = θ1 + ω1t + 0.5 α t².
At the end, angular speed of the wheel,
ω2 = 0 rad/sθ2
= θ1 + ω1t + 0.5 α t²0
= θ1 + ω1 (1.5T) + 0.5 α (1.5T)²0
= 3π + 3.20 (1.5T) + 0.5 α (1.5T)²
α = -2.69 rad/s²
Step 2: Let's find the angle through which the wheel has turned when the angular speed is 1.60 rad/s.
ω1 = 3.20 rad/s
ω2 = 1.60 rad/s.
The angle through which the wheel has turned is given by
θ = θ1 + 0.5 (ω1 + ω2)
tθ = θ1 + 0.5 (ω1 + ω2)
tθ = 3π + 0.5 (3.20 + 1.60)
tθ = 3π + 2.40 t.
we know that α = -2.69 rad/s²
From the kinematic equation, ω2 = ω1 + αt. By rearranging, we get t = (ω2 - ω1)/α. Substitute the given values to find the value of t.
t = (1.60 - 3.20)/-2.69t
= 1.119 seconds.
Substitute the value of t in the equation for θ.
θ = 3π + 2.40 t
θ = 3π + 2.40 (1.119)
θ = 6.74 radians.
Therefore, the wheel has turned through an angle of 6.74 radians when the angular speed is 1.60 rad/s.
Learn more about angular speed: https://brainly.com/question/6860269
#SPJ11
The hot resistance of a flashlight bulb is 2.80Ω, and it is run by a 1.58 V alkaline cell having a 0.100Ω internal resistance. (a) What current (in A) flows? ___________ A (b) Calculate the power (in W) supplied to the bulb using I²Rbulb.
_________ W (c) Is this power the same as calculated using V2/Rbulb (where V is the voltage drop across the bulb)? O No O Yes
(a) The current flowing through the circuit is 0.518 A.
(b) The power supplied to the bulb is 0.746 W.
(c) No, this power is not the same as the power calculated using I²Rbulb
The hot resistance of a flashlight bulb is 2.80Ω,
Voltage is 1.58 V
Internal resistance is 0.100Ω .
(a) The current flowing through the circuit is given by:
I = (V - Ir) / R
where
V is the voltage of the cell,
Ir is the internal resistance of the cell and
R is the resistance of the bulb.
I = (1.58 - 0.1) / 2.8I
= 0.518 A
The current flowing through the circuit is 0.518 A.
(b) The power supplied to the bulb can be calculated as
P = I²R
= 0.518² × 2.8P
= 0.746 W
The power supplied to the bulb is 0.746 W.
(c) The voltage drop across the bulb is given by:
V = IR
V = 0.518 × 2.8
V = 1.4544 V
The power supplied to the bulb can also be calculated as:
P = V² / R
P = (1.4544)² / 2.8
P = 0.753 W
No, this power is not the same as the power calculated using I²Rbulb. It's because of the difference in the voltage across the bulb due to the internal resistance of the cell.
Learn more about the current:
brainly.com/question/2248465
#SPJ11
Calculate the maximum kinetic energy of a beta particle when 19K decays via 3.
The Q-value of the decay is 21.46 MeV.The electron binding energy of 19Ca is 3.210 MeV. Therefore, the maximum kinetic energy of the beta particle is:Kmax = Q – EbKmax = 21.46 MeV – 3.210 MeVKmax = 18.25 MeV
When 19K decays to 19Ca via β− decay, the maximum kinetic energy of the beta particle can be calculated by using the following formula: Kmax = Q – Eb Here, Kmax is the maximum kinetic energy of the beta particle, Q is the Q-value of the decay, and Eb is the electron binding energy of the 19Ca atom.
The Q-value of the decay can be calculated using the mass-energy balance equation.
This equation is given by:m(19K)c² = m(19Ca)c² + melectronc² + QHere, melectronc² is the rest mass energy of the electron, which is equal to 0.511 MeV/c².
Substituting the atomic masses from the periodic table, we get:m(19K) = 18.998 403 163 u, m(19Ca) = 18.973 847 u.
Substituting these values into the equation and simplifying, we get:Q = [m(19K) – m(19Ca) – melectron]c²Q = [18.998 403 163 u – 18.973 847 u – 0.000 548 579 u] × (931.5 MeV/u)Q = 0.023 007 u × (931.5 MeV/u)Q = 21.46 MeV
Therefore, the Q-value of the decay is 21.46 MeV. The electron binding energy of 19Ca is 3.210 MeV. Therefore, the maximum kinetic energy of the beta particle is: Kmax = Q – EbKmax = 21.46 MeV – 3.210 MeVKmax = 18.25 MeV
Therefore, the maximum kinetic energy of the beta particle is 18.25 MeV.
Learn more about beta particle here:
https://brainly.com/question/2193947
#SPJ11
Given a region of groundwater flow with a cross sectional area of 100 m ∧ 2, a drop in the water table elevation of 0.1 m over a distance of 200 m and, a hydraulic conductivity of 0.000015 m/s, calculate a. the velocity of groundwater flow, in m/s and m/day b. the volumetric flowrate of groundwater, in m ∧3/5 and m ∧ 3/ day
The volumetric flow rate of groundwater is 0.00000075 m³/s or 0.0648 m³/day.
Given the following values:
Cross-sectional area of groundwater flow, A = 100 m²
Drop in water table elevation, Δh = 0.1 m
Distance traveled, L = 200 m
Hydraulic conductivity, K = 0.000015 m/s
a. The velocity of groundwater flow can be calculated using the formula:
v = (K * Δh) / L
Substituting the given values, we have:
v = (0.000015 * 0.1) / 200
= 0.0000000075 m/s
To convert the velocity to m/day, we multiply by the number of seconds in a day (86,400):
v = 0.0000000075 * 86,400
= 0.000648 m/day
Therefore, the velocity of groundwater flow is 0.0000000075 m/s or 0.000648 m/day.
b. The volumetric flow rate of groundwater can be calculated using the formula:
Q = A * v
Substituting the given values, we have:
Q = 100 * 0.0000000075
= 0.00000075 m³/s
To convert the volumetric flow rate to m³/day, we multiply by the number of seconds in a day (86,400):
Q = 0.00000075 * 86,400
= 0.0648 m³/day
Learn more about volumetric
https://brainly.com/question/12978058
#SPJ11
A circuit connects battery to three light bulbs in parallel. In other words, all the light bulbs are in parallel with one another, and in parallel with the battery. What happens to the circuit if one of the light bulb burns out? Why? A. Total resistance increases, other bulbs get brighter B. Total resistance increases, other bulbs get dimmer C. Total resistance increases, brightness of other bulbs does not change D. All the bulbs go out E. Total resistance decreases, other bulbs get brighter F. Total resistance decreases, other bulbs get dimmer G. Total resistance decreases, brightness of other bulbs does not change
If one of the light bulb burns out, Total resistance increases, other bulbs get dimmer. The circuit would not be broken if one of the bulbs burns out. This is the effect of a parallel circuit when one component fails. Therefore. the correct answer is option B.
In a parallel circuit, each device operates independently. As a result, if one component fails, it does not cause the others to stop working. However, since the resistance of each bulb is fixed, the total resistance of the circuit decreases as bulbs are added.
When a bulb burns out, the resistance of the circuit rises, making the other bulbs dimmer. Because the current in a parallel circuit is divided among the components, the current flowing through each remaining bulb would decrease if one bulb burns out.
So, if one bulb fails, the voltage across it would drop, and it would get dimmer. That's why in parallel circuit the bulbs are installed in parallel to ensure that they function independently of each other. So, option B is the correct answer.
To learn more about resistance: https://brainly.in/question/19540047
#SPJ11
An axle starts from rest and uniformly increases angular speed to 0.17rev/s in 31 s. (a) What is its angular acceleration in radians per second per second? rad/s 2
(b) Would doubling the angular acceleration during the given period have doubled final angular speed? Yes No
(a) The angular acceleration of the axle is approximately 0.00548 [tex]rad/s^2[/tex].
(b) No, doubling the angular acceleration would not double the final angular speed.
(a) To find the angular acceleration, we can use the formula: angular acceleration (α) = (final angular speed - initial angular speed) / time. Given that the initial angular speed is 0 rev/s, the final angular speed is 0.17 rev/s, and the time is 31 s, we can calculate the angular acceleration as follows:
α = (0.17 rev/s - 0 rev/s) / 31 s ≈ 0.00548 [tex]rad/s^2[/tex].
Therefore, the angular acceleration of the axle is approximately 0.00548 [tex]rad/s^2[/tex].
(b) Doubling the angular acceleration during the given period would not double the final angular speed. The relationship between angular acceleration, time, and final angular speed is given by the formula: final angular speed = initial angular speed + (angular acceleration * time).
If we double the angular acceleration, the new angular acceleration would be 2 * 0.00548 [tex]rad/s^2[/tex] = 0.01096 [tex]rad/s^2[/tex]. However, the time remains the same at 31 s. Plugging these values into the formula, we get:
final angular speed = 0 rev/s + (0.01096 [tex]rad/s^2[/tex] * 31 s) ≈ 0.33976 rev/s.
Comparing this to the original final angular speed of 0.17 rev/s, we can see that doubling the angular acceleration does not result in doubling the final angular speed. Therefore, the answer is No.
To learn more about angular acceleration, refer:-
https://brainly.com/question/1980605
#SPJ11
Starting with Maxwell's two curl equations, derive the dispersion relation for high frequency propagation in a dilute plasma given by: Ne? k= -- 02 meo where N is the number of atoms per unit volume, and it is assumed that there is one free electron for each atom present. (All other symbols have their usual meaning.)
The dispersion relation for high-frequency propagation in a dilute plasma, derived from Maxwell's two curl equations, is given by [tex]Ne\omega^2 = -k^2/\epsilon_0 \mu_0[/tex], where N is the number of atoms per unit volume and each atom is assumed to have one free electron.
To derive the dispersion relation for high-frequency propagation in a dilute plasma, we start with Maxwell's two curl equations:
∇ × E = - ∂B/∂t (1)
∇ × B = [tex]\mu_0J + \mu_0\epsilon_0 \delta E/\delta t (2)[/tex]
Assuming a plane wave solution of form [tex]E = E_0e^{(i(k.r - \omega t))} and B = B_0e^{(i(k.r - \omega t))[/tex], where [tex]E_0[/tex] and [tex]B_0[/tex] are the amplitudes, k is the wavevector, r is the position vector, ω is the angular frequency, and t is time, we substitute these expressions into equations (1) and (2). Using the vector identities and assuming a linear response for the plasma, we arrive at the following relation:
[tex]k * E = \omega B/\mu_0 (3)[/tex]
Next, we use the equation for the electron current density, J = -Neve, where e is the charge of an electron, to substitute into equation (2). After some algebraic manipulations and using the relation between E and B, we obtain:
[tex]Ne\omega^2 = -k^2/\epsilon_0\mu_0[/tex]
Here, N represents the number of atoms per unit volume in the dilute plasma, and it is assumed that each atom has one free electron. The dispersion relation shows the relationship between the wavevector (k) and the angular frequency (ω) for high-frequency propagation in the dilute plasma.
Learn more about angular frequency here:
https://brainly.com/question/32670038
#SPJ11
Find the magnitude of the magnetic field at the center of a 45 turn circular coil with radius 16.1 cm, when a current of 3.47 A flows in it. magnitude:
The magnitude of the magnetic field at the center of a 45 turn circular coil with radius 16.1 cm is approximately 4.83 × 10^-5 Tesla.
To find the magnitude of the magnetic field at the center of a circular coil, we can use the formula for the magnetic field inside a coil:
B = (μ₀ * N * I) / (2 * R)
where B is the magnetic field, μ₀ is the permeability of free space (4π × 10^-7 T·m/A), N is the number of turns in the coil, I is the current flowing through the coil, and R is the radius of the coil.
In this case, the coil has 45 turns, a radius of 16.1 cm (or 0.161 m), and a current of 3.47 A.
Plugging in the values into the formula, we have:
B = (4π × 10^-7 T·m/A) * (45) * (3.47 A) / (2 * 0.161 m)
Simplifying the equation, we find:
B ≈ 4.83 × 10^-5 T
Therefore, the magnitude of the magnetic field at the center of the coil is approximately 4.83 × 10^-5 Tesla.
Learn more about magnetic field here:
https://brainly.com/question/30331791
#SPJ11
A 2.6 kg mass is connected to a spring (k=106 N/m) and is sliding on a horizontal frictionless surface. The mass is given an initial displacement of +10 cm and released with an initial velocity of -11 cm/s. Determine the acceleration of the spring at t=4.6 seconds. (include units with answer)
When a 2.6 kg mass connected to a spring (k=106 N/m) is sliding on a horizontal frictionless surface then the acceleration of the spring at t = 4.6 seconds is approximately -0.194 m/[tex]s^2[/tex].
To determine the acceleration of the spring at t=4.6 seconds, we can use the equation of motion for a mass-spring system:
m * a = -k * x
where m is the mass, a is the acceleration, k is the spring constant, and x is the displacement from the equilibrium position.
Given:
m = 2.6 kg
k = 106 N/m
x = 10 cm = 0.1 m (initial displacement)
v = -11 cm/s = -0.11 m/s (initial velocity)
t = 4.6 s
First, let's calculate the position of the mass at t=4.6 seconds. Since the motion is oscillatory, we can use the equation:
x(t) = A * cos(ωt) + B * sin(ωt)
where A and B are constants determined by the initial conditions, and ω is the angular frequency.
To find A and B, we need to use the initial displacement and velocity:
x(0) = A * cos(0) + B * sin(0) = A * 1 + B * 0 = A = 0.1 m
v(0) = -A * ω * sin(0) + B * ω * cos(0) = B * ω = -0.11 m/s
Since A = 0.1 m, we have B * ω = -0.11 m/s.
Rearranging the equation, we get:
B = -0.11 m/s / ω
Substituting the value of A and B into the equation for x(t), we have:
x(t) = 0.1 * cos(ωt) - (0.11 / ω) * sin(ωt)
To determine ω, we use the relation between ω and k:
ω = sqrt(k / m)
Plugging in the values of k and m, we get:
ω = sqrt(106 N/m / 2.6 kg)
Now we can calculate the acceleration at t=4.6 seconds using the equation:
a(t) = -ω^2 * x(t)
To substitute the values and calculate the acceleration at t = 4.6 seconds, let's first find the values of ω, x(t), and B:
ω = sqrt(106 N/m / 2.6 kg) ≈ 5.691 rad/s
x(t) = 0.1 * cos(ωt) - (0.11 / ω) * sin(ωt)
x(4.6) = 0.1 * cos(5.691 * 4.6) - (0.11 / 5.691) * sin(5.691 * 4.6) ≈ 0.019 m
Now we can calculate the acceleration:
a(t) = -ω^2 * x(t)
a(4.6) = -5.691^2 * 0.019 ≈ -0.194 m/[tex]s^2[/tex]
Therefore, the acceleration of the spring at t = 4.6 seconds is approximately -0.194 m/[tex]s^2[/tex]. The negative sign indicates that the acceleration is directed opposite to the initial displacement.
Learn more about acceleration here:
https://brainly.com/question/31479424
#SPJ11
Draw a schematic circuit diagram using two batteries, 2 bulbs, switch, motor and a resistor.
The schematic circuit diagram using two batteries, 2 bulbs, switch, motor and a resistor is as shown
[Circuit Diagram]
Batteries -- Switch -- Bulb 1 -- Bulb 2 -- Motor -- Resistor
A circuit diagram is a visual representation of an electrical circuit that describes the components and connections between them. In order to draw a schematic circuit diagram using two batteries, 2 bulbs, switch, motor and a resistor, follow these steps:
Step 1: Draw the Circuit Diagram
The first step is to draw the circuit diagram of the given circuit. In this circuit, we have two batteries, 2 bulbs, switch, motor and a resistor connected in series.
Step 2: Add Symbols for the Components
In the circuit diagram, each component is represented by a symbol. We add symbols for each component as shown below:
Step 3: Connect the Components
Now, we connect the components as shown below:
Step 4: Label the Circuit Finally, we label the circuit as shown below:
[Circuit Diagram]
Batteries -- Switch -- Bulb 1 -- Bulb 2 -- Motor -- Resistor
Therefore, the schematic circuit diagram using two batteries, 2 bulbs, switch, motor and a resistor is as shown in the figure below:
[Circuit Diagram]
Batteries -- Switch -- Bulb 1 -- Bulb 2 -- Motor -- Resistor
Learn more about circuit diagram https://brainly.com/question/19865219
#SPJ11
A coordinate system (in meters) is constructed on the surface of a pool table, and three objects are placed on the table as follows: a m1=1.7−kg object at the origin of the coordinate system, a m2=3.2−kg object at (0,2.0), and a m3=5.1−kg object at (4.0,0). Find the resultant gravitational force exerted by the other two objects on the object at the origin. magnitude N direction - above the +x-axis
The resultant gravitational force exerted by the other two objects on the object at the origin is `2.60 x 10^-10 N` and the direction is above the +x-axis.
In a coordinate system that is constructed on the surface of a pool table with objects m1, m2 and m3 placed on it, the resultant gravitational force exerted by the other two objects on the object at the origin can be calculated using the following steps:
Step 1: Determine the distance between objects m1 and m2 using the Pythagorean theorem. The distance is given by `sqrt(2^2 + 0^2) = 2 meters`.Step 2: Determine the distance between objects m1 and m3 using the distance formula. The distance is given by `sqrt((4 - 0)^2 + (0 - 0)^2) = 4 meters`.
Step 3: Calculate the magnitude of the force exerted by object m2 on object m1. This is given by `F = G(m1)(m2)/(r^2) = 6.67 x 10^-11 (1.7)(3.2)/(2^2) = 2.29 x 10^-10 N`.
Step 4: Calculate the magnitude of the force exerted by object m3 on object m1. This is given by `F = G(m1)(m3)/(r^2) = 6.67 x 10^-11 (1.7)(5.1)/(4^2) = 1.25 x 10^-10 N`.
Step 5: Calculate the magnitude of the resultant force exerted by the other two objects on the object at the origin. This is given by `F = sqrt(F2^2 + F3^2) = sqrt((2.29 x 10^-10)^2 + (1.25 x 10^-10)^2) = 2.60 x 10^-10 N`.
Step 6: Determine the direction of the resultant force. Since the force exerted by object m3 is along the x-axis and the force exerted by object m2 is along the y-axis, the direction of the resultant force is above the +x-axis.Given the above information, the resultant gravitational force exerted by the other two objects on the object at the origin is `2.60 x 10^-10 N` and the direction is above the +x-axis.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
Consider a 3-body system their masses,m,,me & m, and their position vectors are, 11.12.&3. Write the equations of motions each object Attach File browie Lacal Files Browse Content Collection
In physics, three-body problems include computing the motion of three bodies interacting with each other under the effect of gravity. Consider a 3-body system where their masses, m, me, and m, and their position vectors are 11, 12, and 3. We can write the equations of motion for each object using Newton's second law of motion.
Newton's second law of motion can be written as:
F = ma Where F is the net force on an object, m is its mass, and a is its acceleration. For each object, we can write the equation of motion in terms of the components of the net force acting on it. For the first object with mass m1 and position vector r1, the net force acting on it is given by:
F1 = G(m2m1/|r2-r1|^2)(r2-r1) + G(m3m1/|r3-r1|^2)(r3-r1)
where G is the universal gravitational constant and |r2-r1| denotes the magnitude of the vector r2-r1.
The equation of motion for the first object can be written as:
m1a1 = G(m2m1/|r2-r1|^2)(r2-r1) + G(m3m1/|r3-r1|^2)(r3-r1)
where a1 is the acceleration of the first object.
Similarly, for the second object with mass m2 and position vector r2, the equation of motion can be written as:
m2a2 = G(m1m2/|r1-r2|^2)(r1-r2) + G(m3m2/|r3-r2|^2)(r3-r2)
where a2 is the acceleration of the second object.
For the third object with mass m3 and position vector r3, the equation of motion can be written as:
m3a3 = G(m1m3/|r1-r3|^2)(r1-r3) + G(m2m3/|r2-r3|^2)(r2-r3)
where a3 is the acceleration of the third object.
These are the equations of motion for each object in the 3-body system.
Learn more about Newton's second law of motion here
https://brainly.com/question/2009830
#SPJ11
A battery-operated car utilizes a 12.0 V system. Find the charge (in C) the batteries must be able to move in order to accelerate the 790 kg car from rest to 25.0 m/s, make it climb a 2.10 ✕ 10^2 m high hill, and then cause it to travel at a constant 25.0 m/s by exerting a 4.20 ✕ 10^2 N force for an hour.
The charge the batteries must be able to move in order to accelerate the 790 kg car from rest to 25.0 m/s, make it climb a 2.10 ✕ 10^2 m high hill, and then cause it to travel at a constant 25.0 m/s by exerting a 4.20 ✕ 10^2 N force for an hour is 2.3 x 10^5 C.
The work done by the battery-powered car is obtained from adding the potential and kinetic energy needed to overcome frictional forces.
W= ∆PE + ∆KE + W_friction
(1)Initial potential energy is 0. ∆PE = mgh = (790 kg)(9.8 m/s²)(210 m) = 1.64 x 10^6 J
(2)Final kinetic energy is 0.5mv² = 0.5(790 kg)(25 m/s)² = 4.94 x 10^5 J. ∆KE = 4.94 x 10^5 J
(3)Power is force times velocity.
Power = (4.20 ✕ 10² N)(25 m/s) = 1.05 x 10^4 W
(4)Time is one hour or 3600 s.
(5)The total work is the sum of ∆PE, ∆KE, and work from friction. Work = ∆PE + ∆KE + W_friction = W
(6)Efficiency = work output/work input = (5)/(6)(7)
Power is equal to energy divided by time. P = E/t
(8)Current is power divided by voltage. P = IVI = P/V
(9)Charge is current times time. Q = ItCharge (Q) = Current (I) × time (t) = Power (P) / Voltage (V) × time (t)Charge = 1.05 x 10^4 W / 12.0 V × 3,600 s
Charge = 2.3 x 10^5 C
Therefore, the charge the batteries must be able to move in order to accelerate the 790 kg car from rest to 25.0 m/s, make it climb a 2.10 ✕ 10^2 m high hill, and then cause it to travel at a constant 25.0 m/s by exerting a 4.20 ✕ 10^2 N force for an hour is 2.3 x 10^5 C.
Learn more about charge here
https://brainly.com/question/12095123
#SPJ11
A12.0-cm-diameter solenoid is wound with 1200 turns per meter. The current through the solenoid oscillates at 60 Hz with an amplitude of 5.0 A. What is the maximum strength of the induced electric field inside the solenoid?
The maximum strength of the induced electric field inside the solenoid isE = -N(ΔΦ/Δt) = -144 x 4π × 10^-7 x π x 0.06² x 377 x 5cos(377t)E = 1.63 × 10^-2 cos(377t) volts/meterThe magnitude of the maximum induced electric field is 1.63 × 10^-2 V/m
The formula to calculate the maximum strength of the induced electric field inside the solenoid is given by;E= -N(ΔΦ/Δt)where,E= Maximum strength of the induced electric fieldN= Number of turns in the solenoidΔΦ= Change in magnetic fluxΔt= Change in timeGiven,A12.0-cm-diameter solenoid is wound with 1200 turns per meter.The radius of the solenoid, r = 6.0 cm or 0.06 m.Number of turns per unit length = 1200 turns/meterTherefore, the total number of turns N of the solenoid, N = 1200 x 0.12 = 144 turns.The maximum amplitude of the current, I = 5.0 A.
The frequency of oscillation of the current, f = 60 Hz.Using the formula for the magnetic field inside a solenoid, the magnetic flux is given by;Φ = μINπr²where,μ = permeability of free space = 4π × 10^-7π = 3.14r = radius of the solenoidN = Total number of turnsI = CurrentThus,ΔΦ/Δt = μNπr²(ΔI/Δt) = μNπr²ωIsin(ωt)where, ω = 2πf = 377 rad/s.ΔI = Maximum amplitude of the current = 5.0
A.Substituting the given values in the above formula, we get;ΔΦ/Δt = 4π × 10^-7 x 144 x π x 0.06² x 377 x 5sin(377t)Therefore, the maximum strength of the induced electric field inside the solenoid isE = -N(ΔΦ/Δt) = -144 x 4π × 10^-7 x π x 0.06² x 377 x 5cos(377t)E = 1.63 × 10^-2 cos(377t) volts/meterThe magnitude of the maximum induced electric field is 1.63 × 10^-2 V/m.
Learn more about Strength here,
https://brainly.com/question/26998713?
#SPJ11
current of 10.0 A, determine the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them.
The magnitude of the magnetic field at a point on the common axis of the coils and halfway between them is 1.27 × 10^-6 T.
When a current flows through a wire, it creates a magnetic field around it. Similarly, when a wire is placed in a magnetic field, it experiences a force. The strength of this force depends on the magnitude of the magnetic field and the current flowing through the wire. To calculate the magnitude of the magnetic field at a point on the common axis of two coils, we use the Biot-Savart law, which relates the magnetic field to the current flowing through the wire.
Given a current of 10.0 A and two coils placed on a common axis, the magnitude of the magnetic field at a point halfway between them can be calculated as follows:
B = (μ₀/4π) * (2I/2r)
where B is the magnetic field, I is the current, r is the distance from the wire to the point where the magnetic field is to be calculated, and μ₀ is the permeability of free space.
In this case, the two coils are identical and carry the same current. Therefore, the current flowing through each coil is I/2. The distance between the coils is also equal to the radius of each coil. Therefore, the distance from the wire to the point where the magnetic field is to be calculated is r = R/2, where R is the radius of the coil.
Substituting these values in the above equation, we get:
B = (μ₀/4π) * (2(I/2)/(R/2)) = (μ₀I)/2πR
where μ₀ = 4π × 10^-7 T m/A is the permeability of free space.
Therefore, the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them is (μ₀I)/2πR = (4π × 10^-7 T m/A) × (10.0 A)/(2π × 0.5 m) = 1.27 × 10^-6 T.
Hence, the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them is 1.27 × 10^-6 T.
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
why does the wavelength of light hydrogen emits when heated up is equal to the wavelength of light that hydrogen absorbs when you shine white light towards it.
The phenomenon you're referring to is called spectral line emission and absorption in hydrogen. It can be explained by the principle of quantized energy levels in atoms.
When hydrogen gas is heated up, the atoms gain energy, and some electrons transition from lower energy levels to higher energy levels. These excited electrons are in temporary, unstable states, and they eventually return to their lower energy levels. During this transition, the excess energy is emitted in the form of photons, which we perceive as light.
The emitted photons have specific wavelengths that correspond to the energy difference between the involved energy levels. This results in a characteristic emission spectrum with distinct spectral lines.
On the other hand, when white light (which consists of a continuous spectrum of different wavelengths) passes through hydrogen gas, the atoms can absorb photons with specific energies that match the energy differences between the energy levels of the hydrogen atom. This leads to the absorption of certain wavelengths of light and the creation of dark absorption lines in the spectrum.
The reason the emitted and absorbed wavelengths match is due to the conservation of energy. The energy of a photon is directly proportional to its frequency (E = h × f, where E is energy, h is Planck's constant, and f is frequency), and the frequency is inversely proportional to the wavelength (f = c / λ, where c is the speed of light and λ is wavelength). Therefore, the energy difference between the energy levels in the atom must be equal to the energy of the absorbed or emitted photons, which results in matching wavelengths.
In summary, the equality of emitted and absorbed wavelengths in hydrogen can be explained by the quantized energy levels in atoms and the conservation of energy in photon interactions.
To learn more about absorption visit: https://brainly.com/question/30935871
#SPJ11
A string in a guitar (string instrument) is 2.4m long, and the speed of sound along this string is 450m/s. Calculate the frequency of the wave that would produce a third harmonic
The frequency of the wave that would produce a third harmonic on a string with a length of 2.4 m and a speed of sound of 450 m/s is approximately 281.25 Hz.
To calculate the frequency of the third harmonic of a string, we need to consider the fundamental frequency and apply the appropriate formula.
The fundamental frequency (f1) of a string is given by the equation:
f1 = v / (2L)
where v is the speed of sound along the string and L is the length of the string.
In the case of the third harmonic, the frequency is three times the fundamental frequency:
f3 = 3f1
Substituting the values into the equations, we can calculate the frequency of the third harmonic.
f1 = 450 m/s / (2 * 2.4 m)
f1 ≈ 93.75 Hz
f3 = 3 * 93.75 Hz
f3 ≈ 281.25 Hz
To know more about fundamental frequency
https://brainly.com/question/31314205
#SPJ11
A 68 kg skier approaches the foot of a hill with a speed of 15 m>s. The surface of this hill slopes up at 40.0° above the horizontal and has coefficients of static and kinetic friction of 0.75 and 0.25, respectively, with the skis. (a) Use energy conservation to find the maximum height above the foot of the hill that the skier will reach. (b) Will the skier remain at rest once she stops, or will she begin to slide down the hill? Prove your answer.
Final kinetic energy,Ek2 = 1/2 × m × v2²Ek2 = 1/2 × (68 kg) × (v2)²Ek2 = 34m²/s². The weight of the skier, mg = (68 kg)(9.8 m/s²)mg = 666.4 N. Therefore, the frictional force will be able to balance the weight of the skier and prevent her from sliding down the hill.
(a) Maximum height the skier will reach. The work-energy principle of physics states that the total work done on a system is equal to the change in its kinetic energy.
In other words, the work-energy principle says that the initial kinetic energy plus the work done on the system equals the final kinetic energy.
When a skier is skiing down a hill, he is losing gravitational potential energy and gaining kinetic energy. So, if we can determine the initial and final kinetic energies, we can find the maximum height reached by the skier.
Work done by frictional force, Wfriction = fs×m×g×cosθ×dwhere fs = 0.75 is the coefficient of static friction between skis and snow,m = 68 kg is the mass of the skier, g = 9.8 m/s² is the acceleration due to gravity,θ = 40.0° is the angle of the slope, d = L/sinθ is the length of the slope,L = vt = (15 m/s)(10 s) = 150 m is the length of the slope that the skier covers in 10 seconds. Wfriction = (0.75)(68 kg)(9.8 m/s²) cos 40° (150 m/sin 40°)W friction = 21917 J Initial kinetic energy,Ek1 = 1/2 × m × v1²Ek1 = 1/2 × (68 kg) × (15 m/s)²Ek1 = 15300 J
Conservation of energy states that the sum of initial kinetic energy and initial potential energy is equal to the sum of final kinetic energy and final potential energy, where potential energy comes in the form of gravitational potential energy when we deal with vertical motions. Mathematically, it can be written asInitial kinetic energy + Initial potential energy = Final kinetic energy + Final potential energySince the skier starts from rest, the initial kinetic energy is zero.
Hence, Initial potential energy at the foot of the hill = Final kinetic energy + Final potential energywhere potential energy is given bymgh where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above some reference point (usually the ground).
Final kinetic energy,Ek2 = 1/2 × m × v2²Ek2 = 1/2 × (68 kg) × (v2)²Ek2 = 34m²/s²
Final potential energy at the maximum height h = Final potential energy at the foot of the hill + Work done by frictional force-mgh = 0 + Ek1 - Ek2 - Wfriction-mgh = (15300 J) - (34 m²/s²) - (21917 J)-mgh = -66617 Jh = 33.81 mTherefore, the maximum height that the skier will reach is 33.81 m.
(b)The skier will remain at rest once she stops since the coefficient of static friction between skis and snow is 0.75, which is greater than the coefficient of kinetic friction, 0.25.
When the skier stops, the force of friction between skis and snow will be the maximum value of static friction, which is given byfs × m × gfs × m × g = (0.75)(68 kg)(9.8 m/s²)fs × m × g = 477.48 N
The weight of the skier,mg = (68 kg)(9.8 m/s²)mg = 666.4 N
Therefore, the frictional force will be able to balance the weight of the skier and prevent her from sliding down the hill.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
A rotating space station is said to create "artificial gravity" –a loosely-defined term used for an acceleration that would be crudely similar to gravity. The outer wall of the rotating space station would become a floor for the astronauts, and centripetal acceleration supplied by the floor would allow astronauts to exercise and maintain muscle and bone strength more naturally than in non-rotating space environments. Randomized Variables d=195 m If the space station is 195 m in diameter, what angular velocity would produce an "artificial gravity" of 9.80 m/s² at the rim? Give your answer in rad's. ω = _____________
The angular velocity that would produce an "artificial gravity" of 9.80 m/s² at the rim of the space station is 0.316 rad/s.
Diameter of space station = 195m
Gravity at the rim = 9.8 m/s²
The formula to find the angular velocity of a rotating body is given as
ω = √(g/r)
Where, ω = angular velocity
g = gravity
r = radius
d = diameter => r = d/2
We have to calculate the angular velocity (ω) that would produce an artificial gravity of 9.80 m/s² at the rim.
The diameter of the space station is 195m, so the radius will be:
r = d/2= 195/2= 97.5 m
The value of gravity (g) is given as 9.80 m/s²
Using the formula,
ω = √(g/r)
ω = √(9.8/97.5)
ω = 0.316 rad/s
Therefore, the value of angular velocity that would produce an "artificial gravity" of 9.80 m/s² at the rim is 0.316 rad/s.
Learn more about angular velocity at: https://brainly.com/question/29566139
#SPJ11
Calculate the rms speed of an oxygen molecule at 11 °C. Express your answer to three significant figures and include the appropriate units.
The rms speed of an oxygen molecule at 11 °C is approximately 482.47 m/s.
To calculate the root mean square (rms) speed of a gas molecule, we can use the formula:
v_rms = √(3kT/m)
Where:
v_rms is the rms speed
k is the Boltzmann constant (1.38 x 10^-23 J/K)
T is the temperature in Kelvin
m is the molar mass of the gas molecule
First, we need to convert the temperature from Celsius to Kelvin:
T = 11 °C + 273.15 = 284.15 K
The molar mass of an oxygen molecule (O2) is approximately 32 g/mol.
Now, we can calculate the rms speed:
v_rms = √(3 * (1.38 x 10^-23 J/K) * (284.15 K) / (0.032 kg/mol))
Simplifying the equation:
v_rms = √(3 * (1.38 x 10^-23 J/K) * (284.15 K) / (0.032 x 10^-3 kg/mol))
Calculating the value:
v_rms ≈ 482.47 m/s
To know more about root mean square (rms)
https://brainly.com/question/31830043
#SPJ11
A real object is 18.0 cm in front of a thin, convergent lens with a focal length of 10.5 cm. (a) Determine the distance from the lens to the image. (b) Determine the image magnification. (c) Is the image upright or inverted? (d) Is the image real or virtual? 3- A man can see no farther than 46.8 cm without corrective eyeglasses. (a) Is the man nearsighted or farsighted? (b) Find the focal length of the appropriate corrective lens. (c) Find the power of the lens in diopters. 5- A single-lens magnifier has a maximum angular magnification of 7.48. (a) Determine the lens's focal length (in cm). (b) Determine the magnification when used with a relaxed eye. 6-A compound microscope has objective and eyepiece lenses of focal lengths 0.82 cm and 5.5 cm, respectively. If the microscope length is 12 cm, what is the magnification of the microscope?
a) The distance from the lens to the image is 5.6 cm.b) The image magnification is 0.6.c) The image is inverted.d) The image is real.e) The man is nearsighted.f) The focal length of the corrective lens is -46.8 cm.g) The power of the lens is -2.15 diopters.h) The focal length of the single-lens magnifier is 1.34 cm.i) The magnification with a relaxed eye is 1.48.j) The magnification of the compound microscope is 68.5.
a) The distance from the lens to the image can be determined using the lens formula: 1/f = 1/do + 1/di, where f is the focal length and do and di are the object and image distances, respectively. Solving for di, we find that the image distance is 5.6 cm.
b) The image magnification is given by the formula: magnification = -di/do, where di is the image distance and do is the object distance. Substituting the values, we get a magnification of 0.6.
c) The image is inverted because the object is located outside the focal length of the convergent lens.
d) The image is real because it is formed on the opposite side of the lens from the object.
e) The man is nearsighted because he can see objects clearly only when they are close to him.
f) To find the focal length of the corrective lens, we use the lens formula with do = -46.8 cm (negative sign indicating nearsightedness). The focal length is -46.8 cm.
g) The power of the lens can be calculated using the formula: power = 1/focal length. Substituting the values, we find that the power of the lens is -2.15 diopters.
h) The focal length of the single-lens magnifier can be determined using the formula: magnification = 1 + (di/do), where di is the image distance and do is the object distance. Given the maximum angular magnification and assuming the eye is relaxed, we can find the focal length to be 1.34 cm.
i) With a relaxed eye, the magnification is equal to the angular magnification, which is given as 7.48.
j) The magnification of the compound microscope can be calculated using the formula: magnification = -D/fe, where D is the distance between the lenses and fe is the eyepiece focal length. Substituting the given values, we find the magnification to be 68.5.
Learn more about nearsighted here:
https://brainly.com/question/30392724
#SPJ11
Grant jumps 170 m straight up into the air to slam-dunk a basketball into the net. With what speed did he leave the floor?
The speed with which Grant left the floor was 57.7 m/s.
When Grant jumps 170m into the air to slam-dunk a basketball into the net, the speed with which he leaves the floor can be found out by using the conservation of mechanical energy, which is represented by the formula: 1/2 mvi2 + mghi = 1/2 mvf2 + mghf Here, m represents mass, vi represents the initial velocity, vf represents the final velocity, hi represents the initial height, and hf represents the final height. We can consider the initial height to be zero, so h i = 0 m. The final height will be 170 m (as he jumps 170 m high). Hence, h f = 170 m. The initial velocity can be assumed to be zero as the basketball player was on the ground before he jumped. Therefore, vi = 0 m/s. Substituting the values in the formula, we get: 1/2 mvf2 + mghf = 0 + mghf + m × g × 170 vf2 = 2 × g × hf= 2 × 9.8 × 170 vf2 = 3332vf = √3332 = 57.7 m/s. Therefore, the speed with which Grant left the floor was 57.7 m/s.
To know more about grant visit:
https://brainly.com/question/30734311
#SPJ11
Use the following diagram to answer the next two questions: The quantity represented by the number 1 in the diagram is: 3. n= the order of the bright fringe b. λ= the wavelength of the light c. d= the distance between the two slits d. x= the distance from the central bright fringe to the next bright fringe The quantity represented by the number 2 in the diagram is: a. d= distance between the two slits b. x = the distance between the central bright fringe to another bright fringe c. I= distance from the double slit to the screen d. λ= the wavelength of light Clear my choice
The quantity represented by the number 1 in the diagram is x = distance from the central bright fringe to the next bright fringe and the quantity represented by the number 2 in the diagram is d = distance between the two slits.
The Young’s double-slit experiment is a classic physics experiment in which two parallel slits are illuminated with a light source to generate an interference pattern on a screen behind the slits.
The diagram shown below represents a bright fringe pattern generated by a double-slit arrangement:
Figure shows double slit diffraction pattern.
The distance between the central bright fringe and any of the bright fringes on either side is represented by x.
Therefore, the quantity represented by the number 1 in the diagram is:x = distance from the central bright fringe to the next bright fringe.
The distance between the two slits is represented by d. Therefore, the quantity represented by the number 2 in the diagram is: d = distance between the two slits.
Hence, the quantity represented by the number 1 in the diagram is x = distance from the central bright fringe to the next bright fringe and the quantity represented by the number 2 in the diagram is d = distance between the two slits.
Learn more about Young’s double-slit here:
https://brainly.com/question/29885741
#SPJ11
An oscillating LC circuit consisting of a 1.3 nF capacitor and a 4.0 mH coil has a maximum voltage of 3.8 V. What are (a) the maximum charge on the capacitor, (b) the maximum current through the circuit, (c) the maximum energy stored in the magnetic field of the coil? (a) Number 4.9 Units nc (b) Number ___ Units A (c) Number ___ Units nJ
a) The maximum charge on the capacitor is approximately 4.94 nC.
b) The maximum current through the circuit is approximately 0.043 A.
c) The maximum energy stored in the magnetic field of the coil is approximately 3.49 μJ.
(a) To find the maximum charge on the capacitor, we can use the equation Q = CV, where Q is the charge, C is the capacitance, and V is the voltage.
C = 1.3 nF = 1.3 × 10^(-9) F
V = 3.8 V
Substituting these values into the equation, we have:
Q = (1.3 × 10^(-9) F) × (3.8 V) = 4.94 × 10^(-9) C
(b) The maximum current through the circuit can be found using the equation I = ωQ, where I is the current, ω is the angular frequency, and Q is the charge.
The angular frequency (ω) can be calculated using the formula ω = 1/sqrt(LC), where L is the inductance and C is the capacitance.
L = 4.0 mH = 4.0 × 10^(-3) H
C = 1.3 nF = 1.3 × 10^(-9) F
Substituting these values into the formula, we have:
ω = 1/sqrt((4.0 × 10^(-3) H) × (1.3 × 10^(-9) F)) ≈ 8.65 × 10^6 rad/s
Now, substituting the value of ω and Q into the equation for current, we get:
I = (8.65 × 10^6 rad/s) × (4.94 × 10^(-9) C) ≈ 4.27 × 10^(-2) A
(c) The maximum energy stored in the magnetic field of the coil can be calculated using the formula E = (1/2)LI^2, where E is the energy, L is the inductance, and I is the current.
L = 4.0 mH = 4.0 × 10^(-3) H
I = 0.043 A (from part b)
Substituting these values into the formula, we have:
E = (1/2) × (4.0 × 10^(-3) H) × (0.043 A)^2 ≈ 3.49 × 10^(-6) J
To know more about magnetic field
https://brainly.com/question/30331791
#SPJ11