What kind of waste is shown in the photograph?
A. Composted waste
B. E-waste
C. Hazardous waste
O D. Septic system waste

Answer:

221.22K or -51°C

Explanation:

We will be using the Ideal Gas Law to calculate the temperature of the gas. It is a mathematical relationship that describes the behavior of ideal gas ample for any combo of varying pressure, volume, temperature, and # of moles (n). It is derived by combing Boyle's Law, Charles' Law, Gay-Lussac's & Avogadro's Law.

Note: As always, remember that temperature must be in Kelvin not Celsius when using this equation.

Ideal Gas Law: [tex]PV = nRT[/tex], where P = pressure, V = volume (in Liters), n = # of moles, R = the ideal gas constant, and T = temperature (in Kelvin).

Based on the problem, we are given the pressure, volume, and # of moles. We are asked to find the temperature. What about R you ask? Well, R is a constant that is the value of 1 mole of gas at STP. R has various values depending on the pressure units. In this case, our pressure is in atm so the R value = 0.0821.

Onto the math - all that needs to be done now is to plug and chug. Plug in the given values to find the temperature:

Set up: [tex](7.6 atm)(12L) = (5 mol)(0.0821 L*atm/(mol*K))(T)[/tex]

==> [tex]T = \frac{(7.6 atm)(12L)}{(5 mol)(0.0821 L*atm/(mol*K))}[/tex]

==> T = 221.17K

The answer is 221.17K. To convert into Celsius, subtract by 273.15 to get -50.99 or -51°C.

Answer:

I need further information.

Explanation:

Extra information is needed for you to know the correct information.

It is a thermodynamic quantity that is equal to the total heat content of a system. It is equal to the internal energy of the system plus the product of pressure and volume.

Enthalpy is nothing but energy and they are of 4 types in thermodynamics-

1. Internal Energy, U

2. Heat enthalpy, H

3. Helmholtz enthalpy, A

4. Gibb's Free enthalpy, G

The total energy of a system cannot be measured directly because the internal energy contains components that are unknown, not easily accessible, or are not of interest in thermodynamics. Generally, a change in enthalpy is the expression for measurements at constant pressure because it simplifies the information of energy transfer.

Therefore, Extra information is needed for you to know the correct information.

Learn more about Enthalpy, here:

https://brainly.com/question/3393755

#SPJ3

By using filtration, the sand and fine salt can be effectively separated based on their difference in particle size, providing a clean separation of the two components.

Filtration is a separation technique that takes advantage of the difference in particle size between sand and salt. It involves passing the mixture through a porous material, such as filter paper or a filter funnel, which allows the liquid (saltwater) and small salt particles to pass through while retaining the larger sand particles.

Here's how the filtration process can be carried out:

1. Set up a filter apparatus with a funnel and filter paper or a filter flask.

2. Place the mixture of sand and salt in a beaker or a flask.

3. Slowly pour the mixture into the filter paper or funnel, allowing the liquid (saltwater) to pass through while retaining the sand on the filter paper.

4. Once the liquid has passed through completely, the sand will be left behind on the filter paper or in the filter flask.

5. Carefully remove the sand from the filter paper or filter flask, and the saltwater solution can be collected separately.

For more such questions on filtration

https://brainly.com/question/29756050

#SPJ8

Answer:

1) Exothermic.

2) [tex]Q_{rxn}=-8580J[/tex]

3) [tex]\Delta _rH=-121.0kJ/mol[/tex]

Explanation:

Hello there!

1) In this case, for these calorimetry problems, we can realize that since the temperature increases the reaction is exothermic because it is releasing heat to solution, that is why the temperature goes from 22.0 °C to 28.6 °C.

2) Now, for the total heat released by the reaction, we first need to assume that all of it is absorbed by the solution since it is possible to assume that the calorimeter is perfectly isolated. In such a way, it is also valid to assume that the specific heat of the solution is 4.184 J/(g°C) as it is mostly water, therefore, the heat released by the reaction is:

[tex]Q_{rxn}=-m_{Total}C(T_2-T_1)\\\\Q_{rxn}=-(300g+10.7g)*4.184 \frac{J}{g\°C} (28.6\°C-22.0\°C)\\\\Q_{rxn}=-8580J[/tex]

3) Finally, since the enthalpy of reaction is calculated by dividing the heat released by the reaction over the moles of the solute, in this case LiCl, we proceed as follows:

[tex]\Delta _rH=\frac{Q_{rxn}}{n_{LiCl}} \\\\\Delta _rH=\frac{-8580J}{10.7g*\frac{1mol}{150.91g} }*\frac{1kJ}{1000J} \\\\\Delta _rH=-121.0kJ/mol[/tex]

Best regards!

Answer:

please give me brainlist and follow

Explanation:

The key difference between Democritus and Dalton atomic theory is that the Democritus atomic theory is an ancient theory that scientists later refined and elaborated whereas Dalton atomic theory is a comparatively modern, scientific theory that we cannot discard due its important statements.

Answer:

It's too far away

Explanation:

According to classical mechanics, gravitational pull is inversely proportional to the distance squared; as the distance increases, the gravitational pull decreases at a faster and faster rate. Since Alpha Centauri A is a few lightyears (Tens of trillions of kilometers away), without even needing to calculate the force of gravity, it is very miniscule.

Answer: pH of buffer solution is 8.1

Explanation:

The formula for the Henderson–Hasselbalch equation is:

[tex]pH=pK_a+\log\frac{[A^-]}{[HA]}[/tex]

[tex]pH[/tex] is the concentration of [tex][H^+][/tex]

[tex]pK_a[/tex] is the acid dissociation constant,

[tex]A^-[/tex] and [tex]HA[/tex] are concentrations of the conjugate base and starting acid.

Putting in the values we get:

[tex]pH=7.5+\log\frac{x}{\frac{x}{4}}[/tex]

[tex]pH=8.1[/tex]

Thus pH of buffer solution is 8.1

Answer:

sorry my phone died lol but here are the answers

<3

Answer: a.) Methyl would be the answer.

Explanation:

Answer:

C. 30 kJ

Explanation:

Hello there!

In this case, in agreement to the thermodynamic definition of the Gibbs free energy, in terms of enthalpy of entropy:

[tex]\Delta G= \Delta H-T\Delta S[/tex]

It is possible to calculate the required G by plugging in the given entropy and enthalpy as shown below:

[tex]\Delta G=-220kJ/mol-5000K*-0.05kJ/mol*K\\\\\Delta G=30kJ/mol[/tex]

Therefore, the answer is C. 30 kJ .

Best regards!

Answer:

1. Physical Weathering

2. Option B

Explanation:

1. Physical weathering

On Mars, there are two types of weathering agents a) wind and b) acid fog. Thus, they will carry out only physical weathering

2. Option B

3D can be used to produce things that are required on the Mars and also the locally available raw material can be used for printing thereby saving the cost.

Answer:

Forests are renewable

Explanation:

Forests can grow again, but it takes forever to grow a new one so it shouldn't be taken for granted! You can remake a whole new forest, but it will take around 50 years and a lot of animals will die without them before that time comes!

But then again, it could be a non-renewable resources; because it takes so long to grow a new one!

Hope this helps!

Answer:

29.39% of AlCl₃ in the sample

Explanation:

Based on the reaction:

MnO₂(s) + 2Cl⁻ + 4H⁺ → Mn²⁺ + Cl₂(g) + 2H₂O

We can find the amount of chloride in solution with the amount of MnO₂ that reacted as follows:

Initial mass MnO₂ = 0.6467g

Recovered mass = 0.3104g

Mass that reacted = 0.6467g - 0.3104g = 0.3363g

Moles MnO₂ -Molar mass: 86.9368g/mol-:

0.3363g * (1mol / 86.9368g) = 3.868x10⁻³ moles MnO₂

Moles Cl⁻:

3.868x10⁻³ moles MnO₂ * (2mol Cl⁻ / 1mol MnO₂) = 7.737x10⁻³ moles Cl⁻

Moles of AlCl₃ and mass -Molar mass AlCl₃: 133.34g/mol-:

7.737x10⁻³ moles Cl⁻ * (1mol AlCl₃ / 3mol Cl⁻) = 2.579x10⁻³ moles AlCl₃

2.579x10⁻³ moles AlCl₃ * (133.34g / mol) =

0.3439g of AlCl₃ are present in the sample.

The percent is:

0.3439g of AlCl₃ / 1.1701g * 100 =

Answer:

b

Explanation:

Answer:

The KE increases.

Explanation:

KE=1/2(mv²)

So, as the velocity increases, kinetic energy also increases.

Answer:sun

Explanation:The Sun is the star at the center of the Solar System. It is a nearly perfect sphere of hot plasma, heated to incandescence by ... When hydrogen fusion in its core has diminished to the point at which the Sun is no longer in . Sunlight on the surface of Earth is attenuated by Earth's atmosphere, so that less power arrives

Answer:

0.895 mole of Fe₂O₃.

Explanation:

We'll begin by calculating the number of mole in 100 g of Fe. This can be obtained as follow:

Molar mass of Fe = 56 g/mol

Mass of Fe = 100 g

Number of mole of Fe =?

Mole = mass / molar mass

Number of mole of Fe = 100 / 56

Number of mole of Fe = 1.79 mole

Finally, we shall determine the number of mole of Fe₂O₃ produced by the reaction of 100 g (i.e 1.79 moles) of Fe. This can be obtained as follow:

4Fe + 3O₂ — > 2Fe₂O₃

From the balanced equation above,

4 moles of Fe reacted to produce 2 moles of Fe₂O₃.

Therefore, 1.79 moles of Fe will react to produce = (1.79 × 2)/4 = 0.895 mole of Fe₂O₃.

Thus, 0.895 mole of Fe₂O₃ was obtained from the reaction.

Answer:

the payloads weight

Explanation:

a p e x on the ground stream

Answer:

The payload's weight

Explanation:

i just took the test on a pex :)

Answer:

Light can travel in three ways from a source to another location: (1) directly from the source through empty space; (2) through various media; (3) after being reflected from a mirror.

Explanation:

Answer:

A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.

Answer:

will not change

Explanation:

A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.

Answer:

Covalent bonds

Explanation:

A water molecule consists of two atoms of hydrogen linked by covalent bonds to the same atom of oxygen. Atoms of oxygen are electronegative and attract the shared electrons in their covalent bonds.

It is about 3.86 which is 10⁶⁶ watts

Answer:

410 quintillion Joules or 430,000,000,000,000,000,000 Joules

Answer:

D

Explanation:

Magnesium is more reactive than zinc so no reaction will take place

The correct option for the given question about Buffer Solution is Option B) which is maintains a constant or nearly constant pH when small amounts of strong acids or bases are added.

Thus we conclude that when weak acids or bases are supplied in small amounts, the pH remains steady or almost constant.

Learn more about Buffer Solution here:

https://brainly.com/question/26416276

#SPJ2

A. High energy radiation produced in the ozone layer. (:

Answer: It decreases

Answer: It decreases.

Explanation: a p e x :)

potassium chloride from potassium hydroxide and hydrochloric acid