What is the volume of 58.9 grams of oxygen gas (O2) at STP?

Answers

Answer 1

Answer

41.2 L

Explanation

Given that:

The mass of oxygen gas (O₂) = 58.9 grams

What to find:

The volume of 58.9 grams of oxygen gas (O₂) at STP.

Step-by-step solution:

The first step is to convert 58.9 grams of oxygen gas (O₂) given to moles using the mole formula:

[tex]Moles=\frac{Mass}{Molar\text{ }mass}[/tex]

The molar mass of oxygen gas (O₂) is 31.998 g/mol.

[tex]Moles\text{ }of\text{ }O_2=\frac{58.9g}{31.998g\text{/}mol}=1.8407\text{ }mol[/tex]

The final step is to convert the 1.8407 moles of oxygen gas (O₂) to volume using the conversion factor below.

Conversion factor: The molar volume of any gas at STP is 22.4 L. That is, one mole of any gas has a volume of 22.4 L or 22,400 mL.

So,

[tex]\begin{gathered} 1\text{ }mol\text{ }O_2=22.4\text{ }L \\ \\ 1.8407\text{ }mol\text{ }O_2=x \\ \\ x=\frac{1.8407\text{ }mol}{1\text{ }mol}\times22.4\text{ }L \\ \\ x=41.2\text{ }L \end{gathered}[/tex]


Related Questions

When radium-226 experiences alpha decay, the relative mass of the particle released in amu is

Answers

Energy of a photon is equal to 4.655 (4.44 + 0.08).

=0.135MeV=135KeV

Nature contains the radioactive element Ra-226. In 1898, Pierre and Marie Curie were working with uranium ore when they made the discovery of radium.

Uranium-238 undergoes radioactive decay, resulting in Ra-226.

A light paint was also created by combining radium-226 with fluorescent zinc sulfide. During and after World War I, this luminescent paint was employed to decorate watches, compasses, and other equipment.

High radium levels can result in cancer (particularly bone cancer), anemia, a blood issue, shattered teeth and cavities, and cataracts, growths in the eyes.

Some of these medical issues take years to manifest. The majority are brought on by gamma radiation, which can spread widely through the atmosphere.

The mineral uraninite contains the highest concentrations of radium 226 in nature, while it can be found in different proportions in almost all types of rocks and soils that contain naturally occurring uranium.

To know more about radium-226, click on the link below:

https://brainly.com/question/2166010

#SPJ9

Calculate the volume of an object with dimensions measuring: 12 cm x 3 cm x 9 cm?

Answers

Answer: 324 cm³

Explanation: Volume is calculated by the formula LxWxH (length times width times height). In your problem, it would just me 12x3x9. After that, just add units. :)

Where is visible light located on the EM spectrum?A. Right in the middleB. It isn’t on the EM spectrumC. All the way to the rightD. All the way to the left

Answers

Answer: Option D

explanation - Visible light sits in the region with ultraviolet (UV) to the left of the spectrum.

see picture below :

• The picture shows exactly where the visible light is located in the electromagnetic spectrum .

• That is to the left of the ultraviolet radiation, and to the right of infrared (IR).

What is the pH of a solution that is 0.67 M in sodium fluoride and 0.43 M in hydrofluoric acid?

Report your answer to 2 decimal places.

Answers

The pH of a solution that is 0.67 M in sodium fluoride and 0.43 M in hydrofluoric acid is 0.37

What is the pH of a solution?

The pH of a solution is the negative logarithm of the hydrogen ion concentration of the solution.

pH = - log [H⁺]

The pH of the given solution is calculated as follows:

Concentration of the sodium fluoride solution = 0.67 M

Hydrogen concentration = 0
The concentration of the hydrofluoric acid solution = 0.43 M

Hydrogen concentration = 0.43 M

pH = - log(0.43)

pH = 0.37

Learn more bout pH at: https://brainly.com/question/172153

#SPJ1

How do u do question 1b. Explain fully because i only got one mark from my answer here:Nonmetals will not conduct electricity on their own, but nonmetals from group 7 are very electronegative, and they are very likely to make bonds with metals from group 1 and 2, and these bonds will likely be ionic bonds, in which we have ions involved, and this is the case when we have conductivity, so if Bromine form a bond with metals, it will make ions and these ions when dissociated in a solution will cause the solution to conduct electricity.

Answers

A) The melting and boiling point of a compound depends on the elements, the bonds that form the molecule, and the geometry of the compound, so two compounds with a similar structure can have similar melting and boiling points.

Fluorethane has the molecular formula C2H5F, so poly(fluoroethane) may have a similar boiling point since its structure is similar.

B) This is because when a bond is formed, the chemical and physical properties of the compound change because there is a rearrangement of the electrons. So all the compounds that contain bromine will not have the same properties but it will depend on the elements with which they are linked and the type of link between them. If bromine bonds with an element with low electronegativity, such as a metal, for example, an ionic bond will be formed. This ionic bond with metal will give it different electrical properties and this compound can conduct electricity.

Density
Which of the following do you think is more dense?
Water
Ping Pong Ball

Which is more dense a drop of water or ping pong ball

Answers

A drop of water is denser than a ping-pong ball.

Usually, water is made of particles that are firmly pressed together. In differentiation, plastic (the material ping pong balls are made of) may be a lightweight fabric and the particles are not as firmly stuffed together.

The thickness of a ping pong ball is 0.0840 g/cm³, though water’s thickness is 997 kg/m³. Subsequently, ping pong balls aren’t about as thick as water and will continuously coast and surface greatly quickly.

The ping pong ball appears to oppose gravity and coast within the air.

Ping-pong balls drift within the water since they are amazingly lightweight, empty, and filled with air. Too, the water’s surface pressure makes it simple for the ping pong ball to drift.

In expansion, water is denser than ping pong balls, making them look for the most noteworthy point of water.

Learn more about density at

https://brainly.com/question/15164682

#SPJ9

Which of the following are SI units? Select all that apply.gLs

Answers

INFORMATION:

We have the following options

g

L

s

And we must select the options that are SI units.

STEP BY STEP EXPLANATION:

The SI units are:

- For mass: Kg

- For volume: cm^3

- For time: s

- For length: m

Finally, we can see that from given options, s is the unique that belongs to the SI units.

ANSWER:

s

What is the name for potassium oxide's structure? Give two properties of potassium oxide.

Answers

Answer:

- The name for the potassium oxide's structure is ionic.

Properties:

- High melting point.

- Soluble in water.

Explanation:

- The ionic structure it is formed by a cation (atom with positive charge) and an anion (atom with negative charge). In this case, potassium is the cation and the oxigen is the anion.

- Since potassium oxide is an ionic compound, it has a high melting point, because of the strong bonds. Also, it is soluble in polar solvents, like water, because its ions generate polarity in the molecule.

.A voltaic cell consists of a Ni electrode in 1.0M Ni(NO3
)2
and an Fe electrode
in 1.0M Fe(NO3
)2
.
Calculate E°
cell for the spontaneous cell reaction at 25°C

Answers

The standard electrode potential value of a cell can be calculated from the reduction potentials of the electrodes. The standard electrode potential  E⁰ of the voltaic cell with Ni electrode and iron electrode is 0.19 V.

What is standard electrode potential?

The reduction potential of an electrode at standard conditions that is at 298 K and 1 bar pressure is called standard electrode potential.

There are two types of electrodes in a cell called cathode and anode. Cathode is the electrode at which reduction occur where as the electrode which undergo oxidation is called anode.

The standard electrode potential of a cell can be measured  as follows.

[tex]E^{0} _{cell} = E^{0} _{cathode} - E^{0} _{anode}[/tex]

Here, the anode is Fe electrode with a standard electrode potential  of -0.44 V and the anode is Ni electrode having -0.25 V reduction potential.

Thus the standard electrode potential of the voltaic cell can be calculated as follows:

[tex]E^{0} _{cell} = E^{0} _{Ni^{2+}/Ni} = E^{0} _{Fe/Fe^ {2+}}[/tex]

       = (-0.25 v) - (-0.44 v)

       = 0.19 V.

Hence, the standard electrode potential of the cell E⁰ containing Ni electrode and Fe electrode is 0.19 V.

To learn more about standard electrode potential, refer the link below:

https://brainly.com/question/14240930

#SPJ1

if you have 4.0 moles of nitrogen and 5.0 moles of hydrogen, what is the maximum amount of ammonia that you can produce?

Answers

Answer:

Explanation:

Here, we want to get the maximum amount of ammonia that can be produced

From the question, we have it that:

1 mole nitrogen gave 2 moles ammonia

Thus:

4 mole nitrogen will give 8 moles ammonia

Furthermore:

3 moles of hydrogen gave 2 moles of ammonia

5 moles of hydrogen will give:

[tex]\frac{5\times2}{3}\text{ = }\frac{10}{3}[/tex]

The maximum amount of ammonia that can be produced is thus 8.0 moles

A 0.400M formic acid (HCOOH) solution freezes at −0.758∘C Calculate the Ka of the acid at that temperature. (Hint: Assume that molarity is equal to molality. Carry out your calculations to three significant figures and round off to two for Ka.)

Answers

First, find the molality of the solution.

[tex]i=\frac{T_f}{k_f\cdot m}[/tex]

Where k is the molal freezing point, which is 1.86 C/m for water.

[tex]i=\frac{0.758}{1.86\cdot0.4}=\frac{0.758}{0.744}=1.02[/tex]

The equilibrium constant Ka would be

[tex]K_a=\frac{\lbrack HCOO\rbrack\lbrack H\rbrack}{\lbrack HCOOH\rbrack}[/tex][tex]K_a=\frac{x\cdot x}{0.4-x}[/tex]

Then, to find x.

[tex]\begin{gathered} i=\frac{0.4-x+x+x}{0.4}=1.02 \\ x=1.02\cdot0.4-0.4=0.008 \end{gathered}[/tex]

Once we have x, we can obtain the constant Ka

[tex]K_a=\frac{(0.008)^2}{0.4-0.008}=\frac{6.4\times10^{-5}}{0.392}=1.6\times10^{-4}[/tex]

Therefore, the constant Ka of the reaction is 1.6x10^-4.

Given the system at equilibrium: N2O4(g) + 58.1 kJ <----> 2 NO2(g) What will be the result of an increase in temperature at constant pressure?D) The equilibrium will shift to the right, and the concentration of NO2(g) will increaseA) The equilibrium will shift to the left, and the concentration of NO2(g) will decrease. B) The equilibrium will shift to the left, and the concentration of NO2(g) will increase. C) The equilibrium will shift to the right, and the concentration of NO2(g) will decrease.

Answers

STEP-BY-STEP EXPLANATION:

Given information

[tex]N_2O_{4(g)}\text{ + 58.1KJ }\rightleftarrows2NO_{2(g)}[/tex]

From the given reaction, you will see that energy is added to the reactant side. This implies that the reaction is an endothermic reaction.

An endothermic reaction is a type of reaction in which heat is absorbed from the surroundings.

Recall, Le Chatelier's principle states that when external constraints such as (temperature, pressure, and concentration) are imposed in a chemical equilibrium system, the equilibrium shift so as to annul or neutralize the effect of the constraints

When temperature is

Use the reaction below to determine how many liters of H2O(g) result when 2.7 grams of CH4 are combusted in excess oxygen. The temperature after combustion is 380K and the pressure is 1.5 atm.CH4(g) + 2O2(g) > CO2(g) + 2H2O(g)

Answers

1) Write the chemical equation.

[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]

2) List the known and unknown quantities.

Sample: 2.7 g CH4.

Temperature: 380 K.

Pressure: 1.5 atm.

3) Convert grams of CH4 to moles of CH4.

The molar mass of CH4 is 16.0425 g/mol.

[tex]mol\text{ }CH_4=2.7\text{ }g\text{ }CH_4*\frac{1\text{ }mol\text{ }CH_4}{16.0425\text{ }g\text{ }CH_4}=0.17\text{ }mol\text{ }CH_4[/tex]

4) Moles of H2O produced from 0.17 mol CH4.

The molar ratio between CH4 and H2O is 1 mol CH4: 2 mol H2O.

[tex]mol\text{ }H_2O=0.17\text{ }CH_4*\frac{2\text{ }mol\text{ }H_2O}{1\text{ }mol\text{ }CH_4}=0.34\text{ }H_2O[/tex]

5) Volume of H2O produced in the reaction.

5.1- List the known and unknown quantities.

Moles: 0.34 mol H2O.

Temperature: 380 K.

Pressure: 1.5 atm.

Ideal gas constant: 0.082057 L * atm * K^(-1) * mol^(-1)

5.2- Set the equation.

[tex]PV=nRT[/tex]

5.3- Plug in the known values and solve for V (liters).

[tex](1.5\text{ }atm)*(V)=(0.34\text{ }mol\text{ }H_2O)*(0.082057\text{ }L*atm*K^{-1}*mol^{-1})*(380\text{ }K)[/tex][tex]V=\frac{(0.34\text{ }mol\text{ }H_2O)(0.082057\text{ }L*atm*K^{-1}*mol^{-1})(380\text{ }K)}{1.5\text{ }atm}[/tex][tex]V=7.1\text{ }L[/tex]

7.1 L H2O was produced from 2.7 g CH4 in the reaction.

Answer question number 3. The question is in the image.

Answers

ANSWER

Octyne

EXPLANATION

Generally, an organic compound that has triple bond is called alkyne

The general formula for alkyne compound is given below as

[tex]\text{ C}_nH_{2n}[/tex]

Where n is the number of carbon atom

[tex]\begin{gathered} \text{ n = 8} \\ \text{ C}_8H_{2\times8} \\ \text{ C}_8H_{16} \end{gathered}[/tex]

Therefore, the answer is octyne

What do these two changes have in common?
sediment settling to the bottom of a muddy puddle
breaking a ceramic plate
Select all that apply.
A
Both are only physical changes.
Both are caused by heating.
Both are chemical changes.
Both are caused by cooling.

Answers

The bottom of a muddy puddle breaks a ceramic plate Both are only physical changes. Option A.

Breaking a plate is a physical change because no new products are formed during the event. It cannot be called a chemical change because the chemical composition of the splinter is the same as sheet metal. Any physical change that involves a change of state is reversible. Other state changes include evaporative freezing and condensation. Dissolution is also a reversible physical change.

When water is added to a mixture of sand and salt a solution of dissolved salts is formed leaving the sand intact. This is the physical change in recovering salts and sands from solution by filtration and evaporation. Glass breakage is a physical change because the chemical composition of glass does not change when broken. Furthermore, broken glass can be melted back into its original shape.

Learn more about mixture here:-https://brainly.com/question/24647756

#SPJ1

Calculate the molar mass of Na2CO3(in g/mol)

Answers

105.987. First we have to find the atomic mass of each atom of the molecule Na = 22.98977, C = 12.011 and O = 15.999. Since we have two atoms of Na the atomic mass of Na need be multiplied by 2, in case of carbon is 1 and 3 for oxigen and add them all together. 2x(22.98977) +1x(12.011) + 3x(15.999) = 105.987

Conversion factors can be generated based on a balanced chemical reaction. For the
reaction below, identify which conversion factor (equality) is not valid:
C(s) + O2(g) → CO2(g)

A: 1 mole CO₂ = 1 mole C
B: 1 mole CO₂ = 1 mole O2
C: 1 mole C = 1 mole O2
D: 2 moles O₂ = 1 mole CO2

Answers

Answer:

D

Explanation:

D. Since CO2 is the only product, all the oxygen has to be converted into the form of CO2.
Let's pretend for a minute that the equation is:
aC + 2O2 -> CO2 where a is a certain number.
There would be no way of balancing this equation because the amount of oxygen on the left would always be twice of that on the right.

The correctly drawn Lewis structure for CBr4 will have1. 3 single bonds to carbon and 2 single bonds to a terminal bromine2. 2 single bonds to carbon and 2 double bonds to terminal bromine3. 4 single bonds to carbon4. 2 single bonds to carbon and 1 single bond to a terminal bromine5. 2 single bonds to carbon and 2 single bonds to terminal bromine

Answers

The Lewis structure of the carbon tetrabromide would have 4 single bonds to carbon

What is the correct structure?

We know that the Lewis structure of a compound is the kind of structure that shows the symbols of the elements that are found in the compound along side the number of valence electrons that are present.

When we apply the Lewis structure to a molecule, we would see that the symbols of the atoms that can be found in the molecule would be shown as well as the number of valence electrons on the atoms of the elements in the molecule.

Learn more about Lewis structure:https://brainly.com/question/20300458

#SPJ1

2.04 x 10^23 atoms of carbon to grams

Answers

Answer

Mass of carbon = 4.069 g

Explanation

Given:

Number of atoms = 2.04x10^23 atoms

Required: Mass of carbon

Solution

Step 1: Find the number of moles of carbon

1 mole = 6.022x10^23 atoms

x moles = 2.04x10^23 atoms

Solve for x

x = (2.04x10^23 atoms x 1 mole)/6.022x10^23 atoms

x = 0.339 mol

Step 2: From the moles, calculate the mass of carbon

m = n x M where m is the mass, n is the moles and M is the molar mass of carbon

m = 0.339 mol x 12,011 g/mol

m = 4.069 g

Of the molecules SiCl4 and SiI4 , which has bonds that are more polar?

Answers

The SiCl4 molecules' bonds will be more polar.

In a molecule, the difference in electronegativity between the atoms engaged in a bond determines its polarity. Iodine is not as electronegative as chlorine. As a result, the electrons in the Si-Cl bond will be localized more close to the Cl, giving the bond its polarity. Iodine is less electronegative than chlorine, hence it won't produce a Si-I bond that is highly polarized.

Tetrachlorosilane, often known as silicon tetrachloride, is an inorganic chemical having the formula SiCl4. It is an air-fuming, colorless volatile liquid. High purity silicon and silica are made using it for industrial applications.

The chemical compound with the formula SiI4 is called silicon tetraiodide. It is a tetrahedral molecule with 2.432 Si-I bonds. The silicon amides with the formula Si(NR2)4 are precursors to SiI4. Additionally, it has attracted attention in the production and etching of silicon for microelectronics.

To know more about polar bonds, click on the link below:

https://brainly.com/question/4953634

#SPJ9

What ions are present in Fe(NO3)3 (aq) solutions?

Answers

Explanation:

Iron (III) nitrate is a soluble salt. When dissolved in water it will dissociate into its ions: Iron (III) and nitrate.

Fe(NO₃)₃ (aq) ----> Fe³⁺ (aq) + 3 NO₃⁻ (aq)

Answer: Fe³⁺ and NO₃⁻.

chemistry homework help - letter BHot air is less dense than cold air and this si the reason that hot air balloons float. A hot air balloon on a cool summer morning is filled with air to a volume of 2.60x 10^6L and warmed to 195 degrees fahrenheit(90 degrees celsius). A hot air balloon must be inflated to a volume of approximately 2.80x10^6L in order to float in air. a. At constant pressure, provide a molecular level explanation of the relationship between temperature and volume of a gas.B. Calculate the temperature the gas must be in(celsius in order to float).

Answers

Answer: the volume air necessary must be at 117.93 °C to float

Explanation:

The question requires us to determine the final temperature of air in order to float in a hot air baloon, given its initial temperature and volume and the volume necessary for the baloon to float.

The following information was provided by the question:

initial volume = V1 = 2.60x 10^6 L

initial temperature = T1 = 90 °C

final volume = V2 = 2.80x10^6 L

Considering that the pressure remains constant, we can apply Charle's Law, which matematically states the relationship between temperature and volume of a gas at constant pressure:

[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]

Rearranging the equation to calculate the final temperature, we'll have:

[tex]T_2=\frac{V_2\times T_1}{V_1}[/tex]

Note that the temperature must be used in Kelvin, as it refers to the absolute temperature of the gas. We can convert the initial temperature given from °C to K as:

[tex]\begin{gathered} T(K)=T(°C)+273.15 \\ T(K)=90°C+273.15=363.15K \end{gathered}[/tex]

And, applying the values provided by the question:

[tex]T_2=\frac{(2.80\times10^6L)\times(363.15K)}{(2.60\times10^6L)}=391.08K[/tex]

And we can conver this temperature from K to °C as:

[tex]\begin{gathered} T(K)=T(°C)+273.15\rightarrow T(°C)=T(K)-273.15 \\ T(°C)=391.08-273.15=117.93°C \end{gathered}[/tex]

Therefore, the volume air necessary must be at 117.93 °C to float.

Aqueous hydrochloric acid (HCl) reacts with solid sodium hydroxide (NaOH) to produce aqueous sodium chloride (NaCl) and liquid water (H2O). if 1.17 g of sodium chloride is produced from the reaction of 2.6 g of hydrochloric acid and 2.1 g of sodium hydroxide, calculate the percent yield of sodium chloride. Round to 2 sig figs

Answers

Taking into account definition of percent yield, the percent yield of sodium chloride is 38.11%.

Reaction stoichiometry

In first place, the balanced reaction is:

HCl + NaOH → NaCl + H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

HCl: 1 moleNaOH: 1 moleNaCl: 1 moleH₂O: 1 mole

The molar mass of the compounds is:

HCl: 36.45 g/moleNaOH: 40 g/moleNaCl: 58.45 g/moleH₂O: 18 g/mole

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

HCl: 1 mole ×36.45 g/mole= 36.45 gramsNaOH: 1 mole ×40 g/mole= 40 gramsNaCl: 1 mole ×58.45 g/mole= 58.45 gramsH₂O: 1 mole ×18 g/mole= 18 grams

Limiting reagent

The limiting reagent is one that is consumed first in its entirety, determining the maximum amount of product in the reaction.

Limiting reagent in this case

To determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 36.45 grams of HCl reacts with 40 grams of NaOH, 2.6 grams of HCl reacts with how much mass of NaOH?

mass of NaOH= (2.6 grams of HCl× 40 grams of NaOH)÷ 36.45 grams of HCl

mass of NaOH= 2.85 grams

But 2.85 grams of NaOH are not available, 2.1 grams are available. Since you have less mass than you need to react with 2.6 grams of HCl, NaOH will be the limiting reagent.

Percent yield

The percent yield is the ratio of the actual return to the theoretical return.

The percent yield is calculated as the experimental yield divided by the theoretical yield multiplied by 100%:

percent yield= (actual yield÷ theoretical yield)×100%

where the theoretical yield is the amount of product acquired through the complete conversion of all reagents in the final product.

Theoretical yield of NaCl

Considering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 40 grams of NaOH form 58.45 grams of NaCl, 2.1 grams of NaOH form how much mass of NaCl?

mass of NaOH= (2.1 grams of NaOH× 58.45 grams of NaCl)÷ 40 grams of NaOH

mass of NaOH= 3.07 grams

Then, the theoretical yield of NaCl is 3.07 grams.

Percent yield for the reaction in this case

In this case, you know:

actual yield= 1.17 gramstheorical yield= 3.07 grams

Replacing in the definition of percent yields:

percent yield= (1.17 grams÷ 3.07 grams)×100%

Solving:

percent yield= 38.11%

Finally, the percent yield for the reaction is 38.11%.

Learn more about percent yield:

brainly.com/question/14408642

#SPJ1

Consider the reaction below Which species is/are) the Bronsnsted-Lowry base(s)?HCO₃⁻ (aq) + F⁻ (aq) = CO₃²⁻ (aq) + HF (aq)A) F-,HFB) HCO3-, F-C) CO32-, HFD) CO32-, F-

Answers

Answer

D) CO₃²⁻, F⁻

Explanation

A Brønsted-Lowry acid is a compound that supplies a hydrogen ion in a reaction. A Brønsted-Lowry base, conversely, is a compound that accepts a hydrogen ion in a reaction. Thus, the Brønsted-Lowry definitions of an acid and a base focus on the movement of hydrogen ions in a reaction, rather than on the production of hydrogen ions and hydroxide ions in an aqueous solution.

HCO₃⁻ (aq) + F⁻ (aq) = CO₃²⁻ (aq) + HF (aq)

Therefore, in the reaction above, the species that is/are Bronsnsted-Lowry base(s) are CO²⁻ and F⁻

Thus, the correct answer is: D) CO²⁻, F⁻

Calculate the pH values and the masses of dissolved compounds of the following solutions:

a) solution of HCl (M = 36.46 g/mol) with concentration 0,0025 M and volume 500 mL

b) solution of the base Ca(OH)2 (M = 74.09 g/mol) with concentration of 0,02 mol/L and volume 2 liters

Answers

Taking into account the definition of pH and pOH, you get:

a) the pH of a solution of HCl is 2.6 and its mass is 0.045575 grams.

b) the pH of a solution of Ca(OH)₂ is 12.61 and its mass is 2.9636 grams.

Definition of pH

pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.

The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:

pH= - log [H⁺]

Definition of pOH

pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:

pOH= - log [OH⁻]

Relationship between pH and pOH

The following relationship can be established between pH and pOH:

pOH + pH= 14

Strong acid and base

An acid and a base are strong when they are completely ionized, that is, in the process of ionization they are completely transformed into cations or positive ions and anions or negative ions.

Then the initial concentration of the acid or base will be equal to the concentration for the anion and the cation.

Definition of molarity

Molar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.

The molarity of a solution is calculated by:

molarity= number of moles÷ volume

Molarity is expressed in units moles/L.

Definition of molar mass

The molar mass of substance is a property defined as its mass per unit quantity of substance, in other words, molar mass is the amount of mass that a substance contains in one mole.

pH  and mass of a solution of HCl

You know that:

[HCl]= 0.0025 MVolume= 500 mL= 0.500 L (being 1000 mL= 1 L)molar mass= 36.46 g/mole

HCl is a strong acid. Then [HCl]= [H⁺]= 0.0025 M.

The pH of the solution can be calculated as:

pH= - log 0.0025 M

Solving:

pH= 2.6

The pH in this case is 2.6.

The amount of moles of HCl is calculated as:

number of moles= [HCl]× Volume

number of moles= 0.0025 M× 0.500 L

number of moles= 0.00125 moles

Finally, the mass of the solution of HCl is calculated as:

mass= number of moles× molar mass

mass= 0.00125 moles× 36.46 g/mole

mass= 0.045575 grams

Finally, the mass of the solution is 0.045575 grams.

pH and mass of a solution of Ca(OH)₂

You know that:

[Ca(OH)₂]= 0.02 MVolume= 2 Lmolar mass= 74.09 g/mole

Ca(OH)₂ is a strong base. Then [Ca(OH)₂]= 0.02 M and [OH⁻]=2×[Ca(OH)₂]= 0.04 M since the compound forms 2 OH⁻.

The pOH of the solution can be calculated as:

pOH= - log 0.04

Solving:

pOH= 1.39

Replacing in the relationship between pH and pOH:

pH + 1.39= 14

Solving:

pH= 14 - 1.39

pH= 12.61

The pH in this case is 12.61.

The amount of moles of Ca(OH)₂ is calculated as:

number of moles= [Ca(OH)₂]× Volume

number of moles= 0.02 M× 2 L

number of moles= 0.04 moles

Finally, the mass of the solution of Ca(OH)₂ is calculated as:

mass= number of moles× molar mass

mass= 0.04 moles× 74.09 g/mole

mass= 2.9636 grams

Finally, the mass of the solution is 2.9636 grams.

Learn more about pH:

brainly.com/question/17197173

brainly.com/question/17633632

brainly.com/question/12200689

brainly.com/question/9324116

brainly.com/question/5216907

brainly.com/question/11209783

#SPJ1

Determine whether the bond between each of the following pairs of atoms is purely covalent, polar covalent, or ionic.
- I and Cl
-C and O
- Ca and F
- P and P

Answers

The kind of bonds that can be formed between each of the atoms is;

I and Cl - ionic bondC and O - polar covalent bond Ca and F - ionic bond P and P - covalent bondWhat is the Ionic bond?

The ionic bond is the kind of bond that is formed between two atoms in a compound when there is a complete transfer of electrons between the atoms in the compound.

A covalent bond is said to be formed between two atoms when there is a sharing of the electrons that can be found between two atoms. We know that a bond is ionic when the difference in the electronegativity of the atoms is high.

Learn more about ionic bond:https://brainly.com/question/11527546

#SPJ1

8) 0.450 moles of NaCl are dissolved in 145.0 mL of water. Calculate the molarity of the NaCl solution.

Answers

Molarity is a way of expressing the concentration of a solute in a solution, it is expressed with the term M and can be described by the following equation:

[tex]Molarity=\frac{MolesSolute}{Lsolution}[/tex]

Moles of solute = 0.450 mol

Lsolution= Liters of water+Liters of NaCl

We will assume in this case that the volume of NaCl is negligible compared to the volume of water. Therefore, the volume of the solution will be 145.0 mL or 0.1450L

We replace the known data:

[tex]Molarity=\frac{0.450mol}{0.1450L}=3.1M[/tex]

Answer: The molarity of the NaCl solution is 3.1M

Convert 62.00nm/s to pm/ms

Answers

Answer:

62 picometer/millisecond

Explanation:

You multiply the speed value by 1

I need three more brainliest to level up, so if you could mark me as that, that would be great. I hope this helps though!

Use the chemical equation to complete the activity.

2Cu+S→Cu2S
Copper (Cu) reacts with sulfur (S) to form copper sulfide as shown in the equation. A scientist adds 12.7 grams of Cu to 3.2 grams of S to start the reaction. In this reaction, all of the copper and all of the sulfur react. Before running the experiment, the scientist expected the products of the reaction will be a total of 15.9 grams of copper sulfide (Cu2S). In 1–2 sentences, explain the law that the scientist used to predict that the product of the reaction would be 15.9 grams of copper sulfide.

Answers

The law the scientist used to predict that the product of the reaction would be 15.9 grams of copper sulfide is law of conservation of matter

Law of conservation of matter

The law of conservation of matter states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.

The above law suggest that the total mass of reactants must equal to the total mass of the product obtained in a chemical reaction.

With the above information, we can obtain the mass of Cu₂S as follow:

2Cu + S → Cu₂S

Mass of Cu + mass of S = Mass of Cu₂S

12.7 + 3.2 = Mass of Cu₂S

Mass of Cu₂S = 15.9 grams

Thus, from the above illustrations, we can conclude that the law the scientist used was the law of conservation of matter

Learn more about law of conservation of matter:

https://brainly.com/question/9434062

#SPJ1

15.11 + (142 x 16.5) what is the solution to the correct number of significant figures

Answers

Answer:

2358

Explanation:

the whole answer is 2358.11

Other Questions
The price of fuel may increase due to demand and decrease due to overproduction. Marco is studying the change in the price of two types of fuel, A and B, over time.The price f(x), in dollars, of fuel A after x months is represented by the function below:f(x) = 2.15(0.98)xPart A: Is the price of fuel A increasing or decreasing and by what percentage per month? Justify your answer. (5 points)Part B: The table below shows the price g(m), in dollars, of fuel B after m months:m (number of months) 1 2 3 4g(m) (price in dollars) 4.19 3.98 3.78 3.59 Which relation IS a function? why did England need money? where did they turn to in order to get it? Fin tends to exaggerate. He says if he stacked all the quarters he's ever spent on gumball machines, they would reach to the moon. The distance to the moon is about [tex]3.85 \times {10}^{8} [/tex]m and the width of a quarter is about[tex]1.75 \times {10}^{ - 3} [/tex]m. If Fin's claim were true, how many quarters has he spent on gumball machines? A manufacturer knows that their items have a normally distributed lifespan, with a mean of 13.3 years, and standard deviation of 1.1 years.If you randomly purchase one item, what is the probability it will last longer than 10 years?Use the normal table and round answer to four decimal places A local restaurant serves breakfast. They use 124 cups of pancake mix every hour. It takes 1/4 cups of mix to make one pancake. The pancakes are all equal in size.About how many pancakes can the restaurant make in two hours? The temperature in the morning was 2 F. The temperature in the evening was 9 F higher than it was in the morning. What was the temperature in the evening? Write an equation to represent , the balance in an account after years, with an initial investment of $1,000 with an interest rate of 3%, compounded each year. a graduated cylinder contains 25.8 ml of water.Due drops 2 glass marbles weighting 6.5 g into the cylinder.Thew new water level reads 27.2 ml what is the volume of the marbles.What is the density of the marbles 8 - 5(3 + 2x)I need help Imagine you are at the cafeteria for lunch. Your nose smells pizza. Your legs move over to where the food is being served. You have to balance the tray holding your plate and drink with both hands, look around for a free seat, and then sit down. This may seem simple; many different parts of your body have to work together to make all of that happen. To make sure your body can work correctly, even when it does many things at once, your body must be carefully organized.a) explain how the organs worked together.b) explain how the body works Help please.what does the quote "night was cloudless" mean.the quote is from the poem called Jekyll and Hyde.Please tell me what it means. A person from montreal who might identify more strongly with the province of quebec than his or her country, canada, demonstrates _____, a form of cultural space. change to.indirect speech - nigeria is the capital.of.west africa In a parallel circuit with a 12 V battery and three 6 Ohm resistors, what is the total current in the entire circuit? Select one:a.36 Ampsb.6 Ampsc.4 Ampsd.2 Amps the probability of a 4 child family having 4 girls is 0.5. is it true or false solve for the following right triangle upper a and h Suppose babies born after a gestation period of 32 to 35 weeks have a mean weight of 2700 grams and a standard deviation of 800 grams while babies born after a gestation periodof 40 weeks have a mean weight of 2900 grams and a standard deviation of 445 grams. If a 33-week gestation period baby weighs 2250 grams and a 40-week gestation period babyweighs 2450 grams, find the corresponding z-scores. Which baby weighs less relative to the gestation period?Find the corresponding z-scores Which baby weighs relatively less? Select the correct choice below and fill in the answer boxes to complete your choice. a commonly used biological buffer is a made from a weak acid/conjugate base pair called ""tris"". the pka for tris acid is 8.06. you have 1.00 liters of a solution where the concentration of tris acid (ha) is 0.200 m and the concentration of tris base (a-) is 0.150 m. what is the ph of the solution? what is the reciprocal for the fraction 5/7 ?