The vapor pressure of acetone at 58.2°C is approximately 9.48 x 10^(-71) kPa. To determine the vapor pressure of acetone at 58.2°C, we can utilize Antoine's equation.
Antoine's equation relates the temperature of a substance to its vapor pressure. The equation is typically represented as:
log(P) = A - (B / (T + C)),
For acetone, the Antoine equation constants are:
A = 14.314
B = 2756.22
C = -25.23
To convert the vapor pressure from mmHg to kPa, we'll use the conversion factor: 1 mmHg = 0.133322368 kPa.
Now, let's calculate the vapor pressure of acetone at 58.2°C.
T = 58.2°C
Substituting the values into Antoine's equation:
log(P) = 14.314 - (2756.22 / (58.2 - 25.23))
log(P) = 14.314 - (2756.22 / 32.97)
Calculating the value inside the logarithm:
log(P) = 14.314 - 83.6
log(P) = -69.286
Taking the antilogarithm:
P = 10^(-69.286)
P ≈ 7.11 x 10^(-70) mmHg
Converting from mmHg to kPa:
P ≈ (7.11 x 10^(-70)) * (0.133322368 kPa/mmHg)
P ≈ 9.48 x 10^(-71) kPa
The vapor pressure of acetone at 58.2°C is approximately 9.48 x 10^(-71) kPa.
To know more about Vapor, visit
brainly.com/question/6345787
#SPJ11
Ethane (CxH) is burned in a combustion reactor. The gas fed to the reactor contains S.A%C3H 20.1% O2 and 74.5%N(all mol%). of CzHe is burned completely into CO2 and the reactor is operating at steady-state, determine the composition (in mol%) of the product gas exiting the reactor. Write the chemical equation of the reaction (CzHe is burned completely into CO.). 2. Draw a flowchart and fill in all known and unknown variable values and also check if this problem can be solved.
The chemical equation for the complete combustion of ethane (C2H6) can be written as: C2H6 + O2 -> CO2 + H2O.
Given that the gas fed to the reactor contains 20.1% C2H6, 20.1% O2, and 74.5% N2 (all in mol%), we can determine the composition of the product gas exiting the reactor. Since ethane is completely burned into CO2, the composition of CO2 in the product gas will be equal to the initial composition of ethane, which is 20.1 mol%. Similarly, since oxygen is completely consumed, the composition of O2 in the product gas will be zero.
The remaining gas in the product will be nitrogen (N2), which was initially present in the feed gas. Therefore, the composition of N2 in the product gas will be 74.5 mol%. The composition of the product gas can be summarized as follows: CO2: 20.1 mol%. O2: 0 mol%; N2: 74.5 mol%. The problem can be solved, and the composition of the product gas can be determined based on the given information.
To learn more about combustion click here: brainly.com/question/31123826
#SPJ11
19) Following is an important method of preparation of alkanes from sodium alkanoate.
CaO
RCOONa + NaOH -
> RH + Na,CO3
(a) What is the name of this reaction and why?
[1]
b) Mention the role of CaO in this reaction?
[1]
c) Sodium salt of which acid is needed for the preparation of propane. Write chemical reaction.
[2]
d) Write any one application of this reaction?
b. The entropy remains the same. c. The entropy decreases. d. There is too little information to assess the change. 29) A reaction with a is spontaneous at all temperatures. a. negative AH and a positive AS b. positive AH and a negative AS c. positive AH and AS d. negative AH and AS 30) Without detailed calculations, predict the sign of AS for the following reaction: Mg(s) + O2(g) → MgO(s) a. Positive (+) h. Negative (-) c. Zero d. Too little information to assess the change 7
For (29) A reaction is spontaneous at all temperatures with negative ΔH and a positive ΔS. (option a); (30) For the given reaction , ΔS is positive (option a).
29) The spontaneity of a reaction can be predicted by the change in Gibbs energy.
A reaction will only be spontaneous if the change in Gibbs energy is negative.
ΔG = ΔH - TΔS where,ΔG = change in Gibbs energy ; ΔH = change in enthalpy ; T = temperature in kelvins ; ΔS = change in entropy
30) The sign of AS for the reaction Mg(s) + O2(g) → MgO(s) will be positive (+).
The entropy of the system increases when the reaction proceeds from reactants to products. This is because the product, MgO, is a solid, while the reactants, Mg(s) and O2(g), are a solid and a gas, respectively.
Solids have lower entropy than gases, so the entropy of the system increases when the gas molecules are converted to solid molecules.
Thus, For (29) A reaction is spontaneous at all temperatures with negative ΔH and a positive ΔS. (option a); (30) For the given reaction, ΔS is positive (option a).
To learn more about entropy :
https://brainly.com/question/30402427
#SPJ11
Which is not relevant to systems containing a single reaction?
Group of answer choices
Fractional Conversion
Fractional Excess
Selectivity
Extent of Reaction
All of the above
None of the above
The group of answer choices that is not relevant to systems containing a single reaction is "Extent of Reaction."
The other options - Fractional Conversion, Fractional Excess, and Selectivity - are all relevant parameters when considering systems containing a single reaction.
- Fractional Conversion refers to the fraction or percentage of reactants that have undergone the desired reaction and been converted to products.
- Fractional Excess is the excess of one or more reactants over the stoichiometrically required amount in a reaction.
- Selectivity is a measure of how much of the desired product is formed compared to other possible products.
"Extent of Reaction" is typically used in the context of systems with multiple reactions, where it quantifies the progress or extent of each individual reaction in the system. In a system containing a single reaction, the extent of reaction is always complete (100%), so it is not a relevant parameter.
To know more about Reaction related question visit:
https://brainly.com/question/13093274
#SPJ11
Outline the concept of layers of protection analysis distinguishing between layers of protection which prevent and those which mitigate. Provide one example of each category drawn for the in-class review of the Buncefield disaster.
Preventive layers in the Buncefield disaster: High-level alarms to prevent overfilling of storage tanks. Mitigative layers in the Buncefield disaster: Bund walls as secondary containment structures.
Layers of Protection Analysis (LOPA) is a risk assessment methodology used to identify and evaluate layers of protection that prevent or mitigate potential hazards. Preventative layers aim to stop an incident from occurring, while mitigative layers aim to reduce the severity or consequences of an incident. In the case of the Buncefield disaster, an explosion and fire at an oil storage depot in the UK, examples of preventive and mitigative layers can be identified.
Preventive layers of protection aim to prevent the occurrence of a hazardous event. In the Buncefield disaster, one preventive layer was the use of high-level alarms and interlocks. These systems were designed to detect and prevent overfilling of storage tanks by shutting off the inflow of fuel. The purpose of this layer was to prevent the tanks from reaching dangerous levels and minimize the risk of a catastrophic event like an explosion.
Mitigative layers of protection, on the other hand, focus on reducing the severity or consequences of an incident if prevention fails. In the Buncefield disaster, one mitigative layer was the presence of bund walls. Bund walls are secondary containment structures that surround storage tanks to contain spills or leaks. Although the bund walls could not prevent the explosion and fire from occurring, they played a crucial role in limiting the spread of the fire and minimizing the environmental impact by confining the released fuel within the bunded area.
By employing a combination of preventive and mitigative layers, the concept of Layers of Protection Analysis (LOPA) helps to enhance safety and reduce the likelihood and consequences of incidents like the Buncefield disaster.
To learn more about hazards click here, brainly.com/question/31721500
#SPJ11
At atmospheric pressures, water evaporates at 100°C and its latent heat of vaporization is 40,140 kJ/kmol. Atomic weights: C-12; H-1and 0-16. QUESTION 4 (10 marks) A 2 m² oxygen tent initially contains air at 20°C and 1 atm (volume fraction of O, 0.21 and the rest N₂). At a time, t = 0 an enriched air mixture containing 0.35 O₂ (in volume fraction) and the balanse N₂ is fed to the tent at the same temperature and nearly the same pressure at a rate of 1 m³/min, and gas is withdrawn from the tent at 20°C and 1 atm at a molar flow rate equal to that of the feed gas. (a) Write a differential equation for oxygen concentration x(t) in the tent, assuming that the tent contents are perfectly mixed (so that the temperature, pressure, and composition of [5 marks] the contents are the same as those properties of the exit stream). (b) Integrate the equation to obtain an expression for x(t). How long will it take for the mole fraction of oxygen in the tent to reach 0.33?
A. The differential equation for oxygen concentration, x(t), in the tent can be written as follows:
dx/dt = (1/V) * (F_in * x_in - F_out * x)
Where:
dx/dt is the rate of change of oxygen concentration with respect to time,
V is the volume of the tent,
F_in is the molar flow rate of the feed gas,
x_in is the mole fraction of oxygen in the feed gas,
F_out is the molar flow rate of the gas withdrawn from the tent,
x is the mole fraction of oxygen in the tent.
B. Integrating the differential equation, we can obtain an expression for x(t) as follows:
x(t) = (F_in * x_in / F_out) * (1 - e^(-F_out * t / V))
To determine the time it takes for the mole fraction of oxygen in the tent to reach 0.33, we can substitute x(t) = 0.33 into the equation and solve for t.
a. The differential equation for the oxygen concentration in the tent is derived based on the assumption of perfect mixing, where the contents of the tent have the same properties as the exit stream. The equation considers the inflow and outflow of gas and their respective oxygen concentrations.
b. Integrating the differential equation provides an expression for the oxygen concentration in the tent as a function of time. The equation considers the inflow and outflow rates, as well as the initial oxygen concentration in the feed gas. The term (1 - e^(-F_out * t / V)) represents the fraction of oxygen that accumulates in the tent over time.
To determine the time it takes for the mole fraction of oxygen to reach 0.33, we substitute x(t) = 0.33 into the equation and solve for t.
The differential equation and its integration provide a mathematical description of the change in oxygen concentration over time in the oxygen tent. By solving the equation for a specific mole fraction, such as 0.33, the time required for the oxygen concentration to reach that value can be determined. These calculations are based on the given conditions and assumptions, and they allow for the understanding and prediction of oxygen concentration dynamics in the tent.
To know more about concentration visit ,
https://brainly.com/question/28564792
#SPJ11
help me. please use standard font with handwriting and step by
step.
5. These problems relate to finding the drag force, and terminal velocity. (15pts) (1) A solar car has a frontal area of 1.16 m2 and a drag coefficient of CD = 0.106. If the electric motor is deliveri
The drag force experienced by the solar car can be calculated using the formula:Drag Force (F) = (1/2) * CD * ρ * A * V^2,Frontal area (A) = 1.16 m^2,Drag coefficient (CD) = 0.106Density of air (ρ) = Assumed constant at 1.2 kg/m^3 (typical value at sea level)
Let's assume that we want to find the drag force when the solar car is moving at its terminal velocity. At terminal velocity, the net force on the car is zero, so the drag force will be equal to the gravitational force acting on the car.
Gravitational force (Fg) = m * g
We can equate the drag force and gravitational force to find the terminal velocity:
F = Fg
(1/2) * CD * ρ * A * Vt^2 = m * g
From this equation, we can solve for the terminal velocity (Vt):
Vt = sqrt((2 * m * g) / (CD * ρ * A))
To calculate the terminal velocity of the solar car, you would need to know the mass of the car (m) and the acceleration due to gravity (g). Once you have these values, you can substitute them into the formula above along with the given values of frontal area (A), drag coefficient (CD), and air density (ρ = 1.2 kg/m^3) to determine the terminal velocity of the solar car.
To know more about force visit:
https://brainly.com/question/30507236
#SPJ11
In a certain chamber we have 10 chemical components, such as Cl₂, H₂O, HCI, NH3, NH,OH, N₂H₁, CH₂OH, C₂H₁, CO, NH,CI. Find the chemical equilibrium relations that prescribe this system independently. Temperature and pressure of the system are iso-static conditions.
The chemical equilibrium relations that prescribe the above-mentioned chemical system are obtained from its equilibrium constant. The equilibrium constant of a chemical reaction provides a relationship between the reactant and the product's concentrations at a given temperature.
The chemical equilibrium of a reaction can be altered by changing the temperature, pressure, or concentration of the reactants and products.To find the equilibrium relation in the given chemical system, it is first necessary to identify the chemical reaction taking place among the given 10 components.
However, as no reaction has been mentioned in the problem, we cannot assume the reaction. Therefore, we cannot find the equilibrium relations without knowing the reaction.However, let's say we are given the reaction equation, the equilibrium relations can be derived from the reaction's equilibrium constant.
The equilibrium constant is given by, Kc = ([C]^c [D]^d)/([A]^a [B]^b)where a, b, c, and d are the stoichiometric coefficients of reactants A, B, C, and D, respectively. [A], [B], [C], and [D] are the molar concentrations of the corresponding reactants and products at equilibrium.
The expression in the numerator is for the product, and the expression in the denominator is for the reactant. Therefore, for any given reaction, the equilibrium constant gives the relationship between the concentrations of the reactants and products.
The chemical equilibrium constant is dependent on temperature and is only constant for the particular temperature at which it was determined. Therefore, the temperature must be iso-static, as mentioned in the problem, to calculate the equilibrium relations.
To know more about chemical equilibrium click here:
https://brainly.com/question/4289021
#SPJ11
SYNTHESIS The overall reaction for microbial conversion of glucose to L-glutamic acid is: C6H12O6 + NH3 +1.502 → C5H, NO4 + CO₂ + 3H₂O (glucose) (glutamic acid) What mass of oxygen is required t
48.064 g of oxygen is required for the microbial conversion of glucose to L-glutamic acid.
The reaction equation for the microbial conversion of glucose to L-glutamic acid is:C6H12O6 + NH3 +1.502 → C5H, NO4 + CO₂ + 3H₂O (glucose) (glutamic acid)The equation is balanced as there is an equal number of atoms of each element on both sides. It is evident from the equation that 1 mole of glucose reacts with 1 mole of NH3 and 1.502 moles of oxygen to produce 1 mole of L-glutamic acid, 1 mole of CO2, and 3 moles of H2O.
Thus, we can use the balanced equation to determine the amount of oxygen required to produce 1 mole of L-glutamic acid.However, the mass of oxygen required cannot be calculated from the number of moles because mass and mole are different units. Therefore, we need to use the molar mass of oxygen and the stoichiometry of the balanced equation to calculate the mass of oxygen required.
For this reaction, we can see that 1 mole of L-glutamic acid is formed for every 1.502 moles of oxygen used. Therefore, if we use the molar mass of oxygen, we can calculate the mass required as follows:Mass of oxygen = 1.502 moles x 32 g/mole = 48.064 g
So, 48.064 g of oxygen is required for the microbial conversion of glucose to L-glutamic acid.
Learn more about Glucose here,
https://brainly.com/question/30364885
#SPJ11
There is a crystalline powder oxide sample. Above 100 °C, its crystal structure belongs to a perfect cubic system where an atom "B" is exactly sitting at the center of the unit cell. But at room temperature, its structure belongs to a so-called pseudo cubic system, where the atom "B" deviates from the geometric center of the perfect tetragonal system, and then introduce specific physical properties by breaking the symmetry. The deviation is very small, around 0.05-0.01 angstrom. In order to correlate its physical properties to the subtle structure change, we need to identify the exact position of atom "B". There are several different techniques can meet the characterization requirement. Which technique you prefer to use? Please explain why this technique is qualified for this task, and how to locate the exact position of atom "B". 1
X-ray diffraction (XRD) is a suitable technique for identifying the exact position of atom "B" in the crystalline powder oxide sample. XRD can determine the crystal structure and atomic positions by analyzing the diffraction pattern obtained from the sample. This technique enables the precise localization of atom "B" and provides insights into the relationship between its position and the observed physical properties resulting from the structural deviation.
One technique that can be used to identify the exact position of atom "B" in the crystalline powder oxide sample is X-ray diffraction (XRD). XRD is a powerful tool for determining the crystal structure and atomic positions within a material. Here's why XRD is qualified for this task and how it can be used:
1. Qualification: XRD is capable of providing information about the crystal structure and atomic positions in a material. It can accurately determine the unit cell parameters, lattice symmetry, and atomic positions, which makes it suitable for studying the subtle structural changes and locating the position of atom "B" in the pseudo cubic system.
2. Procedure: To locate the exact position of atom "B" using XRD, the following steps can be taken:
a. Preparation: The crystalline powder oxide sample needs to be carefully prepared, ensuring a well-prepared sample with a sufficient quantity of the material.
b. Data Collection: XRD experiments are performed by exposing the sample to X-ray radiation and measuring the resulting diffraction pattern. The diffraction pattern contains peaks that correspond to the crystal lattice and atomic positions.
c. Data Analysis: The obtained diffraction pattern is analyzed using specialized software to determine the lattice parameters and refine the atomic positions. Rietveld refinement or similar techniques can be employed to fit the experimental data with a model and extract the precise position of atom "B" within the crystal structure.
d. Verification: The refined atomic positions can be further verified by comparing them with theoretical calculations and other complementary techniques, if available.
By using XRD, the exact position of atom "B" in the crystal structure can be determined, allowing for a better understanding of the relationship between its position and the observed physical properties resulting from the structural deviation.
Read more on Crystal structure here: https://brainly.com/question/29398453
#SPJ11
Propane (CnH2n+2) is burned with atmospheric air. The analysis of the products on a dry basis is as follows: CO₂ = 11% O₂ = 3.4% CO=2.8% N₂ = 82.8% Calculate the air-fuel ratio and the percent theoretical air and determine the combustion equation.
The air-fuel ratio (A/F) is 0.54 kg/kgmol and The combustion equation for propane is C3H8 + 5O2 + 20.8N2 → 3CO2 + 4H2O + 20.8N2.
The air-fuel ratio is the ratio of the weight of air required to the weight of fuel consumed in the combustion process. Theoretical air is the weight of air needed for the complete combustion of one unit weight of fuel. For complete combustion, a fuel requires theoretical air. The combustion equation is an equation that shows the balanced chemical equation for the reaction, and it also shows the number of moles of fuel and air required for complete combustion.
Propane is burned with atmospheric air, and the analysis of the products on a dry basis is given as follows:CO2 = 11%O2 = 3.4%CO = 2.8%N2 = 82.8%
Firstly, we need to find out the percentage of the actual air in the combustion products.Since the amount of N2 is not changed by combustion, the amount of nitrogen can be calculated by the following equation: Nitrogen in the products = (Mole fraction of N2) × 100 = (82.8/100) × 100 = 82.8%.
Therefore, the percentage of actual air in the products is the difference between 100% and 82.8%, which is 17.2%.Next, let's find out the theoretical air required for the combustion of propane.The balanced combustion equation for propane is: C3H8 + (5 O2 + 20.8 N2) → 3 CO2 + 4 H2O + 20.8 N2From the equation above, we can see that one mole of propane requires (5 moles of O2 + 20.8 moles of N2) of air.
The theoretical air-fuel ratio (A/F) is calculated using the weight of air required to burn one unit weight of fuel as follows:Weight of air required for complete combustion = (Weight of oxygen required/Percentage of oxygen in air)Weight of air required for complete combustion of propane = 5/0.21 (since air contains 21% oxygen by weight)= 23.81 kg/kgmol propane.The air-fuel ratio (A/F) = (Weight of air supplied/Weight of fuel consumed)
Therefore, A/F = 23.81/44 = 0.54 kg/kgmol.
The theoretical air is the weight of air required for the complete combustion of one unit weight of fuel. Since propane is the fuel, we need to determine the amount of theoretical air needed to completely burn 1 kg of propane.The theoretical air required to burn 1 kg of propane = 23.81 kg/kgmol × (1/44 kgmol/kg) = 0.542 kg/kgmol propane.
So, the combustion equation for propane is C3H8 + 5O2 + 20.8N2 → 3CO2 + 4H2O + 20.8N2.
Learn more about combustion here,
https://brainly.com/question/13251946
#SPJ11
Propylene is converted to butyraldehyde and n-butanol in the following reaction sequence in a catalytic reactor: C3H6+CO+ H₂CH/CHO (butyraldehyde) C₁H-CHO+ H₂CH₂OH (n-butanol) Products are fed
In the given reaction sequence, propylene (C3H6) is converted to butyraldehyde (C4H8O) and n-butanol (C4H10O) in a catalytic reactor.
The reaction sequence involves two steps. Let's break down each step and calculate the products formed:
Step 1: C3H6 + CO + H2 → C4H8O (butyraldehyde)
In this step, propylene (C3H6) reacts with carbon monoxide (CO) and hydrogen (H2) to produce butyraldehyde (C4H8O).
Step 2: C4H8O + H2 → C4H10O (n-butanol)
In this step, butyraldehyde (C4H8O) reacts with hydrogen (H2) to produce n-butanol (C4H10O).
Propylene is converted to butyraldehyde and n-butanol through a two-step reaction sequence in a catalytic reactor.
The first step involves the reaction of propylene, carbon monoxide, and hydrogen to form butyraldehyde. The second step involves the reaction of butyraldehyde with hydrogen to produce n-butanol.
Propylene is converted to butyraldehyde and n-butanol in the following reaction sequence in a catalytic reactor: C3H6+CO+ H₂CH/CHO (butyraldehyde) C₁H-CHO+ H₂CH₂OH (n-butanol) Products are fed to a catalytic reactor. The reactor effluent goes to a flash tank and catalyst recycled to the reactor. The reaction products are separated, the product stream is subjected to additional hydrogenation (use only reaction 2) with excess hydrogen, converting all of the butyraldehyde to butanol. The conversion of 1" reaction is given as 40% by mole C)Hs. The 2nd reaction conversion is given as 45% by mole C,H-CHO. Calculate the unkown flow rates in the given process for the given constraints. nis must be equal to 12 mol C,He and n17 and nis must be 4 mol CO and 3 mol H₂, respectively. 40 NCH CH CHƠI n 12.0 mol CH M Mei act₂ Aut mol C.H. mol CO Reactor Flash IN: My nu Separation 4.0 mol CO 1.0 mol H₂ (2 Reaction) Tank nu! mol H₂ P mol C₂H,CHO P₂² ny Pa mal C,H,OH P: nyt mol C,H,CHO mol CHLOH n₂ mol H₂ Hydrogenerator (One Reaction) mol CO mol H₂ mol C The mol CO mol H₂ mol CH CHO mol C,H,OH mol cat mol cat n mol H₂ mal CCOH
To learn more about reactor, visit
https://brainly.com/question/10475418
#SPJ11
Chemical A + Heat = Chemical C
If Chemical A is Copper carbonate , Then what is Chemical C
Answer:
CuO
Explanation:
On heating Copper Carbonate, it turns black due to the formation of Copper Oxide and carbon dioxide is liberated.
Consider the liquid-phase isomerization of 1,5-cyclooctadiene in the presence of an iron pentacarbonyl catalyst. These researchers attempted to model the reactions of interest in two ways: 1. As a set of consecutive, (pseudo) first-order reactions of the form A k2y B k2, C where A refers to 1,5-cyclooctadiene, B to 1,4-cyclooctadiene, and C to 1,3-cyclooctadiene. 2. As a set of competitive, consecutive, (pseudo)first-order reactions of the form: kz A- B ka →C ks The equations describing the time-dependent behavior of the concentrations of the various species present in the system for case 1 are available in a number of textbooks. However, the corresponding solutions for case 2 are not as readily available. (a) For case 2, set up the differential equations for the time dependence of the concentrations of the various species. Solve these equations for the case in which the initial concentrations of the species of interest are C4,0, CB,0, and CC,0. Determine an expression for the time at which the concentration of species B reaches a maximum. (b) Consider the situation in which only species A is present initially. Prepare plots of the dimensionless concentration of species B (i.e., CB/C2,0) versus time (up to 180 min) for each of the two cases described above using the following values of the rate constants (in s-?) as characteristic of the reactions at 160 °C. ki = 0.45 x 10-3 1 -3 k2 = 5.0 x 10- kz = 0.32 x 10-4 k4 = 1.6 x 10-4 k5 = 4.2 x 10-4
(a) For case 2, the differential equations for the time dependence of the concentrations of the various species can be set up as follows:
d[CA]/dt = -kz[CA][B] + ka[C] - ks[CA][B]
d[CB]/dt = kz[CA][B] - ka[C] - ks[CA][B]
d[CC]/dt = ks[CA][B]
To fully solve the differential equations for case 2 and determine the expression for the time at which the concentration of species B reaches a maximum, numerical integration methods and software tools need to be employed.
Similarly, to prepare plots of dimensionless concentration of species B versus time, numerical integration and data visualization techniques should be applied.
(a) For case 2, the differential equations for the time dependence of the concentrations of the various species can be set up as follows:
d[CA]/dt = -kz[CA][B] + ka[C] - ks[CA][B]
d[CB]/dt = kz[CA][B] - ka[C] - ks[CA][B]
d[CC]/dt = ks[CA][B]
Solving these equations for the given initial concentrations [CA]₀, [CB]₀, and [CC]₀, we can determine the time at which the concentration of species B reaches a maximum.
(b) To prepare plots of the dimensionless concentration of species B (CB/CB₀) versus time for each of the two cases, we need to solve the differential equations numerically using the given rate constants.
Using the provided rate constants and assuming an initial concentration [CA]₀ = 1 and
[CB]₀ = [CC]₀
= 0, we can integrate the differential equations numerically over a time range up to 180 minutes. The dimensionless concentration of species B (CB/CB₀) can then be plotted against time.
The numerical integration and plotting can be done using software such as MATLAB, Python with numerical integration libraries (e.g., scipy.integrate), or dedicated chemical kinetics software.
To know more about Concentration, visit
brainly.com/question/28564792
#SPJ11
Polychlorinated biphenyls (PCBs) are major environmental pollutants. which of the following detectors would be most suitable for
Gas chromatography analysis of PCBs?
a) flame ionization (FID)
b) thermal conductivity (TCD)
c) electron capture (ECD)
d) nitrogen-phosphorous (NPD)
e) flame photometric (FPD)
Polychlorinated biphenyls (PCBs) are major environmental pollutants and are often analyzed using Gas Chromatography (GC). Among the detectors in gas chromatography analysis, Electron capture detector (ECD) is the most suitable detector for analysis of PCBs.
Gas chromatography analysis of PCBs
Gas chromatography is an important technique used for the analysis of polychlorinated biphenyls (PCBs). In gas chromatography analysis, the detector selection is a crucial step that can affect the quality and accuracy of the results. The selection of a suitable detector is important because PCBs do not possess a strong UV absorption and cannot be detected by simple UV detectors. Electron capture detector (ECD)
The electron capture detector (ECD) is a highly selective detector and is sensitive to halogen-containing compounds. ECD is also highly sensitive to electronegative elements such as oxygen, nitrogen, and sulfur. Polychlorinated biphenyls (PCBs) possess chlorinated groups which are highly electronegative in nature. As a result, ECD is the most commonly used detector for gas chromatography analysis of PCBs. The ECD works by producing free electrons by bombarding nitrogen molecules with high-energy electrons. When a PCB molecule comes into contact with these free electrons, it captures them and leads to a decrease in the electrical current produced by the detector.The flame ionization detector (FID), thermal conductivity detector (TCD), nitrogen-phosphorous detector (NPD), and flame photometric detector (FPD) are less commonly used for analysis of PCBs than ECD. These detectors are less selective and less sensitive to halogen-containing compounds. Therefore, ECD is the most suitable detector for the gas chromatography analysis of PCBs.
To know more about Polychlorinated biphenyls (PCBs) visit:
https://brainly.com/question/31644598
#SPJ11
PLEASE HELP ME QUICK 40 POINTS WILL MARK BRAINLIEST IF CORRECT
a graduated cylinder is filled to 10 ml with water. a small piece of rock is placed into the cylinder displacing the water to a volume of 15 ml
Explanation:
The volume of the rock can be calculated by subtracting the initial volume of water (10 mL) from the final volume of water and rock together (15 mL):
Rock volume = Final volume - Initial volume
= 15 mL - 10 mL
= 5 mL
Therefore, the volume of the rock is 5 mL.
b. The entropy remains the same. c. The entropy decreases. d. There is too little information to assess the change, 29) A reaction with a is spontaneous at all temperatures. a. negative AH and a positive AS b. positive AH and a negative AS c. positive AH and AS d. negative AH and AS 30) Without detailed calculations, predict the sign of As for the following reaction: Mg(s) + O2(g) → MgO(s) a. Positive (+) b. Negative (-) c. Zero d. Too little information to assess the change
For (29) A reaction is spontaneous at all temperatures with negative ΔH and a positive ΔS. (option a); (30) For the given reaction, ΔS is positive (option a).
29) For a reaction to be spontaneous, ΔG should be negative.
The free energy change, ΔG is related to the change in enthalpy, ΔH and the change in entropy, ΔS through the relation : ΔG = ΔH - TΔSΔG is negative when the reaction is spontaneous, so : ΔH should be negative and ΔS should be positive.
Therefore, the answer is a. negative ΔH and a positive ΔS.
30) The standard molar entropy of oxygen is greater than that of magnesium, and the reaction produces a solid product (MgO). Therefore, the entropy increases when the reactants are converted to products. As a result, ΔS is positive. Therefore, the answer is Positive (+).
Thus, for (29) A reaction with a is spontaneous at all temperatures with negative ΔH and a positive ΔS. (option a); (30) For the reaction, ΔS is positive (option a).
To learn more about entropy :
https://brainly.com/question/30402427
#SPJ11
The reported¹ Margules parameter for a binary mixture of methanol and benzene at 60 °C is A=0.56. At this temperature: psat 1 = 84 kPa Pat = 52 kPa where subscripts (1) and (2) are for methanol and benzene respectively. Use this information to find the equilibrium pressure (kPa) of a liquid-vapor mixture at 60 °C where the compo- sition of the liquid phase is x₁ = 0.25.
The equilibrium pressure of the liquid-vapor mixture at 60 °C with a liquid phase composition of x₁ = 0.25 is approximately 59.89 kPa.
To find the equilibrium pressure of a liquid-vapor mixture at 60 °C with a liquid phase composition of x₁ = 0.25, we can use the Margules equation:
ln(P₁/P₂) = A * (x₂² - x₁²)
Given:
Temperature (T) = 60 °C
Margules parameter (A) = 0.56
Saturation pressure of methanol (P₁) = 84 kPa
Saturation pressure of benzene (P₂) = 52 kPa
Liquid phase composition (x₁) = 0.25
We can plug these values into the equation and solve for the equilibrium pressure (P).
ln(P/52) = 0.56 × (x₂² - 0.25²)
Since the composition of the liquid phase is x₁ = 0.25, we know that x₂ = 1 - x₁ = 1 - 0.25 = 0.75.
ln(P/52) = 0.56 × (0.75² - 0.25²)
ln(P/52) = 0.56 × (0.5)
ln(P/52) = 0.28
Now, we can exponentiate both sides of the equation:
P/52 = e^(0.28)
P = 52 × e^(0.28)
P ≈ 59.89 kPa
Therefore, the equilibrium pressure of the liquid-vapor mixture at 60 °C with a liquid phase composition of x₁ = 0.25 is approximately 59.89 kPa.
Read more on Equilibrium pressure here: https://brainly.com/question/27761278
#SPJ11
Ethanol, C2H5OH (7), is a common fuel additive used in gasoline. The balanced chemical equation for the combustion of ethanol is below: CH-OH (1) +3 02(g) → 3 H2O(g) + 2 CO2 (g) Calculate AHEX for the combustion of ethanol using the standard enthalpies of formation of the products and reactants.
The standard enthalpy change for the combustion of ethanol is -1300 kJ/mol, which means that the reaction is exothermic.
The balanced chemical equation for the combustion of ethanol is CH3CH2OH (l) + 3 O2 (g) → 2 CO2 (g) + 3 H2O (g). The enthalpy change (ΔH) associated with the combustion of one mole of ethanol is the difference between the sum of the standard enthalpies of formation of the products (CO2 and H2O) and the sum of the standard enthalpies of formation of the reactants (ethanol and O2).
Standard enthalpy of formation (ΔHf°) is the enthalpy change that occurs when one mole of a compound is formed from its elements in their standard states under standard conditions (298 K and 1 atm).
The standard enthalpies of formation of ethanol, CO2, and H2O are as follows :
ΔHf° (C2H5OH, l) = -277.69 kJ/mol ;
ΔHf° (CO2, g) = -393.51 kJ/mol ;
ΔHf° (H2O, g) = -241.82 kJ/mol
The standard enthalpy of formation of O2 is zero (0 kJ/mol) because it is an elemental form.
ΔH°rxn = [∑ΔHf°(products)] - [∑ΔHf°(reactants)]
ΔH°rxn = [2(-393.51 kJ/mol) + 3(-241.82 kJ/mol)] - [-277.69 kJ/mol + 3(0 kJ/mol)]
ΔH°rxn = -1301.46 kJ/mol ≈ -1300 kJ/mol
Therefore, the standard enthalpy change for the combustion of ethanol is -1300 kJ/mol, which means that the reaction is exothermic.
To learn more about standard enthalpy change :
https://brainly.com/question/14047927
#SPJ11
Write down the advantage and disadvantage of
cross-circulation drying and
through-circulation drying, respectively
of a batch dryer!
(mention at least 3 of advantage and disadvantage for each
drying m
Cross-Circulation Drying:
1. Uniform Drying: Cross-circulation drying allows for more uniform drying of the material as the air is evenly distributed throughout the dryer. This helps to ensure consistent moisture removal from all parts of the batch.
2. Better Heat Transfer: The cross-circulation configuration promotes efficient heat transfer between the drying air and the material being dried. The continuous movement of air helps to maximize the contact between the air and the material, resulting in faster and more effective drying.
3. Reduced Risk of Contamination: In cross-circulation drying, the drying air is separate from the material being dried. This reduces the risk of contamination, as the air is not recirculated from the drying material back into the drying process.
Disadvantages:
1. Higher Energy Consumption: Cross-circulation drying typically requires more energy compared to other drying methods due to the need for a separate air circulation system. This can increase operating costs and energy consumption.
2. Longer Drying Time: The uniform airflow in cross-circulation drying may result in longer drying times compared to other drying methods. This is because the airflow needs to pass through the entire batch before being exhausted.
3. Complex Equipment Design: Cross-circulation drying systems often require more complex equipment design and installation. The separation of drying air from the material and the need for a separate air circulation system can make the equipment more complex and potentially more expensive to install and maintain.
Through-Circulation Drying:
Advantages:
1. Faster Drying: Through-circulation drying allows for rapid heat transfer between the drying air and the material. The continuous flow of fresh air through the material helps to remove moisture quickly, resulting in shorter drying times.
2. Energy Efficiency: Through-circulation drying systems can be designed to optimize energy efficiency. The use of heat exchangers and air recirculation can help to minimize energy consumption and operating costs.
3. Simplicity of Design: Through-circulation drying systems generally have a simpler design compared to cross-circulation drying systems. The airflow is directed through the material in a straightforward manner, which can simplify equipment design and installation.
Disadvantages:
1. Non-Uniform Drying: Through-circulation drying may result in uneven drying of the material, especially for large or dense batches. The airflow may follow paths of least resistance, resulting in uneven moisture removal and variations in the final product.
2. Risk of Contamination: In through-circulation drying, the drying air is recirculated back into the drying process. This can increase the risk of contamination if proper measures are not taken to filter and clean the drying air.
3. Limited Flexibility: Through-circulation drying systems may have limited flexibility in terms of drying different types of materials. The airflow pattern and heat transfer characteristics may be optimized for specific materials, which may limit the versatility of the drying system.
Cross-circulation drying offers advantages such as uniform drying and better heat transfer but has disadvantages such as higher energy consumption and longer drying times. On the other hand, through-circulation drying provides faster drying and energy efficiency but may result in non-uniform drying and potential contamination risks. The choice between these drying methods depends on factors such as the specific application, desired drying outcomes, and available resources.
To know more about Drying, visit
https://brainly.com/question/30614680
#SPJ11
If you have a gas at 78.50 deg C, what is the temperature of the gas in deg K? Respond with the correct number of significant figures in scientific notation (Use E notation and only 1 digit before decimal e.g. 2.5E5 for 2.5 x 10")
The temperature of the gas in Kelvin to one digit before the decimal point in scientific notation is 3.5E2.
To convert the temperature from degree Celsius to Kelvin, we use the formula:T(K) = T(°C) + 273.15
Given that the temperature of the gas is 78.50 °C, we can convert it to Kelvin using the formula above:T(K) = 78.50 °C + 273.15 = 351.65 KWe can then represent this temperature in scientific notation with one digit before the decimal point:3.5E2
We don't need to include any more significant figures as we were only given the temperature to two decimal places, so any further figures would be considered unreliable.
Therefore, the temperature of the gas in Kelvin to one digit before the decimal point in scientific notation is 3.5E2.
Learn more about temperature here,
https://brainly.com/question/982293
#SPJ11
14. A solution is made by dissolving 6.20 g of NaCl, in 228 g of
water, producing a solution with a volume of 249 mL at 21 °C. What
is the expected osmotic pressure (in atm) at21 °C?
15. Calculate t
The expected osmotic pressure at 21 °C is approximately 2.37 atm.
To calculate the expected osmotic pressure, we can use the formula:
osmotic pressure = (n / V) * (R * T)
where n is the number of moles of solute, V is the volume of the solution, R is the ideal gas constant (0.0821 L * atm / (mol * K)), and T is the temperature in Kelvin.
First, let's calculate the number of moles of NaCl:
molar mass of NaCl = 22.99 g/mol + 35.45 g/mol = 58.44 g/mol
moles of NaCl = mass / molar mass = 6.20 g / 58.44 g/mol ≈ 0.106 mol
Next, we need to convert the volume of the solution to liters:
V = 249 mL = 0.249 L
Now, we can calculate the osmotic pressure:
osmotic pressure = (0.106 mol / 0.249 L) * (0.0821 L * atm / (mol * K)) * (21 + 273) K ≈ 2.37 atm
Learn more about osmotic pressure at https://brainly.com/question/17142533
#SPJ11
The complete question is:
14. A solution is made by dissolving 6.20 g of NaCl, in 228 g of water, producing a solution with a volume of 249 mL at 21 °C. What is the expected osmotic pressure (in atm) at 21 °C?
A feed of 5000kg/h of a 2.0 wt% salt solution at 300 K enters continuously a single effect evaporator and being concentrated to 3.5 wt %. The evaporation is at atmospheric pressure and the area of the evaporator is 82m2. Satırated steam at 385 K is supplied for heating. The boiling point of the solution is the same as waters unders the same conditions. The heat capacity of the feed can be taken as cp=3.9kJ/kg.K. Calculate the amounts of vapor and liquid product the overall heat transfer coefficient U.
Latent heat of water at 373 K = 2260 kJ/kg
Latent heat of steam at 385K = 2230 kJ/kg
The amount of vapor produced in the single-effect evaporator is 3333.33 kg/h, and the amount of liquid product obtained is 1666.67 kg/h. The overall heat transfer coefficient (U) is 614.63 W/m²K.
To calculate the amount of vapor and liquid product in the single-effect evaporator, we can use the following equations:
1. Mass balance equation:
m_in = m_vapor + m_liquid
2. Salt balance equation:
C_in * m_in = C_vapor * m_vapor + C_liquid * m_liquid
Given data:
- Mass flow rate of the feed (m_in) = 5000 kg/h
- Initial salt concentration (C_in) = 2.0 wt%
- Final salt concentration (C_liquid) = 3.5 wt%
- Area of the evaporator (A) = 82 m²
- Heat capacity of the feed (cp) = 3.9 kJ/kg.K
Let's start by calculating the heat transferred from the steam to the feed using the latent heat:
Q = m_vapor * H_vapor
Q = m_in * (C_in - C_liquid) * cp + m_vapor * H_vapor
Since the boiling point of the solution is the same as water, the latent heat of steam at 385 K (H_vapor) can be used. Rearranging the equation, we can solve for m_vapor:
m_vapor = (m_in * (C_in - C_liquid) * cp) / (H_vapor - (C_in - C_liquid) * cp)
Substituting the given values:
m_vapor = (5000 * (0.035 - 0.02) * 3.9) / (2230 - (0.035 - 0.02) * 3.9)
m_vapor ≈ 3333.33 kg/h
Using the mass balance equation, we can calculate the amount of liquid product:
m_liquid = m_in - m_vapor
m_liquid = 5000 - 3333.33
m_liquid ≈ 1666.67 kg/h
To calculate the overall heat transfer coefficient (U), we can use the following equation:
Q = U * A * ΔT
Given data:
- Temperature of the saturated steam = 385 K
- Temperature of the feed entering the evaporator = 300 K
ΔT = 385 - 300 = 85 K
Rearranging the equation, we can solve for U:
U = Q / (A * ΔT)
U = (m_in * (C_in - C_liquid) * cp + m_vapor * H_vapor) / (A * ΔT)
Substituting the given values:
U = (5000 * (0.035 - 0.02) * 3.9 + 3333.33 * 2230) / (82 * 85)
U ≈ 614.63 W/m²K
In the single-effect evaporator, the amount of vapor produced is approximately 3333.33 kg/h, while the amount of liquid product obtained is around 1666.67 kg/h. The overall heat transfer coefficient (U) for the process is calculated to be approximately 614.63 W/m²K.
To know more about evaporator , visit
https://brainly.com/question/24258
#SPJ11
Determine the number and weight average molar masses of a sample
of polyvinyl chloride (PVC), from the following data:
Molar mass range (Kg/mol)
Average molar mass within the interval (Kg/mol)
samp
Without the provided data of the molar mass range and the average molar mass within the interval, it is not possible to determine the number and weight average molar masses of the sample of polyvinyl chloride (PVC).
To determine the number and weight average molar masses, we need specific data regarding the molar mass range and the average molar mass within the interval for the sample of polyvinyl chloride (PVC). These values are crucial for performing calculations.
The molar mass range provides the minimum and maximum values for the molar mass distribution of the PVC sample. The average molar mass within the interval represents the average molar mass of the PVC molecules falling within that specific molar mass range.
Based on the given question, the necessary data is missing, making it impossible to calculate the number and weight average molar masses.
Without the specific data of the molar mass range and the average molar mass within the interval for the sample of polyvinyl chloride (PVC), it is not feasible to determine the number and weight average molar masses. It is essential to have the complete information to perform the necessary calculations accurately.
To know more about molar mass, visit
https://brainly.com/question/837939
#SPJ11
How many grams in 5.8 moles NaCI? with work please
[tex]n=\dfrac{m}{M}[/tex] where n is moles, m is mass and M is molar mass.
To solve for mass, isolate m:
[tex]m=nM[/tex]
Input given information:
[tex]m=5.8*58.44\\m=338.952\\m=340[/tex]
There are 340 g in 5.8 mol of NaCl.
A solution of a substance of unknown molecular weight is prepared by dissolving 0.2 g of the substance in 1 kg of water. This liquid solution is then placed into an apparatus with a rigid, stationary, semipermeable membrane (permeable only to water). On the other side of the membrane is pure water. At equilibrium, the pressure difference between the two compartments is equivalent to a column of 3.2 cm of water. Estimate the molecular weight of the unknown substance. The density of the solution is ~1 g/cm³ and the temperature is 300 K.
The estimated molecular weight of the unknown substance is 8001.63 g/mol.
Estimating molecular weightsTo estimate the molecular weight of the unknown substance, we can use the concept of osmotic pressure.
Osmotic pressure (π) :
π = MRT
where:
π = osmotic pressureM = molarity of the solution (in mol/L)R = ideal gas constant (0.0821 L·atm/(mol·K))T = temperature in KelvinIn this case, the osmotic pressure is equivalent to the pressure difference across the semipermeable membrane, which is 3.2 cm of water.
First, let's convert the pressure difference to atm:
1 atm = 760 mmHg = 101325 Pa
1 cm of water = 0.098 kPa
Pressure difference = 3.2 cm of water * 0.098 kPa/cm
≈ 0.3136 kPa
0.3136 kPa * (1 atm / 101.325 kPa) ≈ 0.003086 atm
Given that the density of the solution is approximately 1 g/cm³, we can assume that the solution is effectively 1 kg/L. Therefore, the molarity of the solution (M) is equal to the number of moles of the solute (unknown substance) divided by the volume of the solution (1 L):
M = (mass of substance in grams / molecular weight of substance) / (volume of solution in liters)
M = (0.2 g / molecular weight) / 1 L
M = 0.2 / molecular weight
Now we can substitute the values into the osmotic pressure equation:
0.003086 atm = (0.2 / molecular weight) * 0.0821 L·atm/(mol·K) * 300 K
0.003086 = (0.0821 * 300) / molecular weight
0.003086 * molecular weight = 0.0821 * 300
molecular weight ≈ (0.0821 * 300) / 0.003086
molecular weight ≈ 8001.63 g/mol
Therefore, the estimated molecular weight of the unknown substance is approximately 8001.63 g/mol.
More on molecular weight calculation can be found here: https://brainly.com/question/23392127
#SPJ4
Chemical process presented in picture below, the manipulated variable is Ca. Heat Exchanger Condensate b. Temperature O d. Steam QUESTION 42 A second order system X(s) k G(s) = = U(s) T²s²+2(ts + 1
To solve this problem using MATLAB, you can use the following code:
```matlab
% Given data
m_total = 1250; % Total mass of the solution (kg)
x_desired = 0.12; % Desired ethanol composition (wt.%)
x1 = 0.05; % Ethanol composition of the first solution (wt.%)
x2 = 0.25; % Ethanol composition of the second solution (wt.%)
% Calculation
m_ethanol = m_total * x_desired; % Mass of ethanol required (kg)
% Calculate the mass of each solution needed using a system of equations
syms m1 m2;
eq1 = m1 + m2 == m_total; % Total mass equation
eq2 = (x1*m1 + x2*m2) == m_ethanol; % Ethanol mass equation
% Solve the system of equations
sol = solve(eq1, eq2, m1, m2);
% Extract the solution
m1 = double(sol.m1);
m2 = double(sol.m2);
% Display the results
fprintf('Mass of the first solution: %.2f kg\n', m1);
fprintf('Mass of the second solution: %.2f kg\n', m2);
```
Make sure to have MATLAB installed on your computer and run the code to obtain the mass of the first and second solutions needed to prepare 1250 kg of a solution with 12 wt.% ethanol and 88 wt.% water. The results will be displayed in the command window.
To know more about solution visit:
https://brainly.com/question/25326161
#SPJ11
Why
is ee COP of a reciprocating compressor better than a screw
compressor that gets oil injected to cool the ammonia gas, you
would think that the gas is cooled by the oil that it requires less
energ
The reciprocating compressor's higher efficiency and ability to achieve higher compression ratios contribute to its improved performance compared to a screw compressor with oil injection.
The COP is a measure of the efficiency of a refrigeration or heat pump system, and it is defined as the ratio of the desired output (cooling or heating effect) to the required input (electric power). A higher COP indicates better efficiency.
In the case of a reciprocating compressor, it operates by using a piston to compress the refrigerant gas. This type of compressor is generally more efficient because it can achieve higher compression ratios, leading to better performance. Additionally, reciprocating compressors can provide better cooling capacity for a given power input.
On the other hand, a screw compressor with oil injection for cooling the ammonia gas introduces an additional heat transfer process between the refrigerant gas and the injected oil. While the oil helps in removing heat from the gas, it also adds an extra thermal resistance and can lead to some energy losses. As a result, the overall COP of a screw compressor with oil injection may be lower compared to a reciprocating compressor.
It's important to note that the specific design, operating conditions, and maintenance practices can influence the performance of both types of compressors. Therefore, it's recommended to consider the application requirements and consult the manufacturer's specifications to determine the most suitable compressor for a given system.
The COP of a reciprocating compressor is generally better than that of a screw compressor with oil injection for cooling the ammonia gas. The reciprocating compressor's higher efficiency and ability to achieve higher compression ratios contribute to its improved performance compared to a screw compressor with oil injection.
To know more about compression ratios, visit:
https://brainly.com/question/26761619
#SPJ11
A feed of 100 mol/min with a mixture of 50 mol% pentane (1), 30 mol% hexane (2) and 20 mol% cyclohexane (3) is fed to a flash drum. The temperature and pressure inside the drum are T = 390K and р = 5
Based on the given information, we can infer that the vapor phase in the flash drum will be rich in pentane, while the liquid phase will contain relatively higher proportions of hexane and cyclohexane.
In a flash drum, a mixture of components with different boiling points is subjected to a lower pressure, causing some of the components to vaporize while others remain in the liquid phase. The vapor and liquid phases achieve an equilibrium state, and the composition of each phase can be determined using the principles of vapor-liquid equilibrium.
Given:
Feed flow rate: 100 mol/min
Mixture composition:
Pentane (1): 50 mol%
Hexane (2): 30 mol%
Cyclohexane (3): 20 mol%
Temperature inside the drum (T): 390 K
Pressure inside the drum (p): 5 bar
To calculate the composition of the vapor and liquid phases in the flash drum, we need to use equilibrium data, such as boiling point data or vapor-liquid equilibrium constants. Without this data, we cannot directly determine the composition of the phases.
However, we can make some general observations:
Pentane has the lowest boiling point among the three components, followed by hexane and then cyclohexane. At the given temperature and pressure, it is likely that pentane will be predominantly in the vapor phase.
Hexane and cyclohexane have higher boiling points and may remain in the liquid phase to a greater extent.
Based on the given information, we can infer that the vapor phase in the flash drum will be rich in pentane, while the liquid phase will contain relatively higher proportions of hexane and cyclohexane. However, without specific equilibrium data, we cannot provide precise calculations or exact composition values for the vapor and liquid phases.
A feed of 100 mol/min with a mixture of 50 mol% pentane (1), 30 mol% hexane (2) and 20 mol% cyclohexane (3) is fed to a flash drum. The temperature and pressure inside the drum are T = 390K and р = 5 bar. The values of the equilibrium constant for the three components are: K1 = 1.685, K2 = 0.742, K3 = 0.532. Find the mole fraction of each component in liquid and vapor phase, and the molar flowrate of vapor and liquid leaving the drum. 35
To know more about vapor phase, visit:
https://brainly.com/question/28303854
#SPJ11
Ammonia is compressed as it passes through a compressor. Prepare a P vs V diagram for ammonia starting with saturated steam at -2 °C and 3.9842 bar up to superheated steam at 10 bar. Determine the minimum amount of work needed per unit mass for this process. For your P vs V diagram use at least four pressures. Check your answer using the value reported in the tables for enthalpy.
A P vs V diagram for the compression of ammonia is provided, starting with saturated steam at -2 °C and 3.9842 bar up to superheated steam at 10 bar. The minimum amount of work needed per unit mass for this process can be determined by calculating the change in enthalpy.
In the P vs V diagram for the compression of ammonia, the process starts with saturated steam at -2 °C and 3.9842 bar. This point corresponds to the saturated vapor line on the diagram. From there, the compression process proceeds to a higher pressure of 10 bar, which represents the superheated steam region. The specific points and pressures on the diagram will depend on the specific properties of ammonia at those temperatures and pressures.
To determine the minimum amount of work per unit mass needed for this compression process, the change in enthalpy needs to be calculated. The enthalpy change can be obtained by subtracting the initial enthalpy from the final enthalpy. The initial enthalpy corresponds to the saturated steam at -2 °C and 3.9842 bar, while the final enthalpy corresponds to the superheated steam at 10 bar. These enthalpy values can be obtained from tables or from equations of state for ammonia.
By calculating the enthalpy change, the minimum amount of work per unit mass required for the compression process can be determined. This work represents the energy input needed to compress the ammonia from the initial state to the final state, accounting for the change in enthalpy.
Learn more about ammonia : brainly.com/question/12276882
#SPJ11