Answer:
average speed= total distance/total time
Explanation:
Related to the distance traveled by the object which means, it is only represented by the magnitude and direction of travel is not important. so average speed= total distance/total time
If the population of frogs decreased, then what would increase?
A
foxes
B
hawks
C
caterpillars
Answer:
my answer is letter b ithink
7th grade science i mark as brainliest
An ant climbs at a steady speed up the side of its
anthill, which is inclined 30.0" from the vertical. Sketch
a free-body diagram for the ant.
Pleas help me it urgent !?
The weight of the ant is the force that acts on the anthill in the downward direction and at angle of 30° rom the vertical.
Given the following data:
Angle of inclination = 30.0°.What is a free-body diagram?In Science, a free-body diagram can be defined as a graphical illustration which is typically used to visualize moments, tension, and applied forces that are acting on an isolated or rigid body (object) while using arrows pointing in the direction of these forces.
In this scenario, the weight of the ant is the force that acts on the anthill in the downward direction and at angle of 30° rom the vertical.
Read more on free-body diagram here: https://brainly.com/question/18770265
If a box that weighs 4.00 N slides across a flat rough table for a distance of 2.00 m then how much work does the weight of the box
do on the box?
A) 88.0 J
B) 456 J
C) 270 J
D) 513 J
E)zero
Answer:
0
Explanation:
Here it's given that the weight of the box is 4N and it slides across a rough table for a distance of 2m . And we are interested in finding out the work done by the weight of the block. Firstly we know that , Work done is ,
[tex]\rm\longrightarrow \pink{ Work\ = \ F.s = |F||s|cos\theta} [/tex]
where
[tex]\theta[/tex] is the angle between displacement and force .Therefore ,
[tex]\rm\longrightarrow Work = (4N)(2m)(cos\theta) [/tex]
Here the angle between the displacement and force is 90° , and value of cos90° is 0 , therefore,
[tex]\rm\longrightarrow Work = 8N-m (0)\\[/tex]
[tex]\rm\longrightarrow \underline{\boxed{\rm\blue{Work = 0 }}}[/tex]
The work done by the weight of the box is zero. The correct answer is zero. The correct option is (E).
Given:
Weight of the box = 4.00 N (acting downward)
Distance = 2.00 m
The angle between force and displacement, θ = 90°
Using the formula for work:
Work (W) = Force × Distance × cos(θ)
Since the angle θ is 90 degrees and cos(90 degrees) = 0.
The work done by the weight of the box is:
W = Force × Distance × cos(90)
W = 4.00 × 2.00 × 0
W = 0 J
Therefore, the work done by the weight of the box is zero. The correct option is (E).
To know more about the work done:
https://brainly.com/question/29989410
#SPJ3
How long does it take light to travel through a 5.20- mm -thick piece of window glass?
Through what thickness of water could light travel in the same amount of time?
Explanation:
Explanation: The speed of light in a vacuum is 3⋅108 m/s . We can now convert to a more appropriate symbol, such as the nanoseconds. So, it will take light approximately 333
200,000 kilometers per secondrefractive index of 1.5).
a computer printer has a width of 18in. What is it’s width in meters
Answer:
0.4572 m
Explanation:
To convert inch to metre, divide the value by 39.37.
=》1 inch = 0.0254 metre
So,
18/39.37 = 0.4572 m
Hope it helps ⚜
The width of the printer is 0.4572 meters.
What is metric conversion system?The metric conversion system is a standardized system of measurement based on the International System of Units (SI). It is used by scientists, engineers, and many others around the world to ensure consistency and accuracy in measurement.
The system is based on a series of prefixes that can be added to a base unit of measurement to create multiples or fractions of that unit. For example, the prefix "kilo-" means "thousand," so one kilometer is equal to 1,000 meters. The metric system is widely used in scientific and technical fields and is also the official system of measurement for many countries.
To convert inches to meters, we can use the conversion factor 1 inch = 0.0254 meters.
So, the width of the printer in meters is:
18 inches x 0.0254 meters/inch = 0.4572 meters
Learn more about metric conversion, here:
https://brainly.com/question/10943201
#SPJ2
A car starts from rest and speeds up to 30 m/s in a total of 6 s.
What is the acceleration?
ctive
5 m/s2
30 m/s
ker
24 m/s2
5 m/s
Answer:
5 m/s2
Explanation:
Using the equation velocity = initial velocity + (acceleration x time)
30 m/s = 0 + acceleration x 6 s
30 m/s = 6 s x acceleration
30 m/s / 6s = acceleration
acceleration = 5 m/s2
What type of wave squeezes together and
pulls apart?
A. longitudinal wave
B. transverse waves
C. seismic waves
D. electromagnetic waves
Answer:
B, longitudinal moves up and down, seismic also,l
what parts of an electric generator are connected?
Answer:
The field and winding
Explanation: they are both connected
A box of spherical jawbreaker candies is 23 g and its volume is 32.3 cm3. If the average mass of a single jawbreaker is 0.94 g, what is the radius of a single jawbreaker
The radius of each jawbreaker is approximately 0.68 cm.
Volume of a sphere;v = 4 /3 πr³where
r = radius
Therefore,
23 g = 32.3 cm³
0.94 g = ?
cross multiply
volume of a single jawbreaker = 32.3 × 0.94 / 23 = 30.362 / 23 = 1.32 cm³
Therefore,
volume of each jawbreaker = 4 /3 πr³
1.32 = 4 / 3 × 3.14 × r³
r³ = 1.32 /4.18666666667
r³ = 0.31533683707
r = ∛0.31533683707
r = 0.680651651 = 0.68
Therefore, the radius of each jawbreaker is approximately 0.68 cm.
learn more on radius here: https://brainly.com/question/19172427
which factor should a student include in a model to explain differences in temperature at earthed equator and earths poles?
Answer:
The uneven heating of Earth by the sun causes the climate to be warm and dry at the equator and cold and wet toward the poles. The angle of sunlight is different at different latitudes, which causes the climate to be warm at the equator and colder toward the poles.
Explanation:
mark brainliest
if i release one steel ball from the top of a ramp and the other ball from the 40cm mark will they have the same velocity?
Answer:
Yes.
Explanation:
Assuming that the balls weigh the same, then they would have the same velocity. Velocity is the term used to describe the speed at which an object is traveling.
What can be proved from the given figure?
It prove that liquid pressure increases with depth
a computer printer has a width of 18in. What is it’s width
Answer:
0.46 m. hope this helps.
Answer:
0.46 Meters
Explanation:
What is the mass of a material whose temperature changes from -12°C to 80°C when 4,577 J heat energy is added to it if the specific heat capacity of the material
is 7.0 J/g°C? Give your answer to 2 decimal places.
[tex] \frac{4577}{7 \times (80 - ( - 12))} \\ \frac{4577}{7 \times92 } \\ \frac{4577}{644} \\ = 8.5g[/tex]
what do you mean by escape speed at a place?
In celestial mechanics, escape velocity or escape speed is the minimum speed needed for a free, non-propelled object to escape from the gravitational influence of a primary body, thus reaching an infinite distance from it.
HOPE IT HELP! PLEASE MARK AS BRAINLIEST!
what is the valency of Sulphur!!
Explanation:
The sulphur atom has 6 electrons in the outermost shell, and its valency could be 6. But it is easier for sulphur to gain two electrons instead of losing six electrons. Hence, its valency is determined by subtracting six electrons from the octet and this gives a valency of two for sulphur.
A 2kg mass is at a height of 3m. What is its gravitational potential energy(use g=10)
Answer:
potential difference
= m × g × h
= ( 2 × 10 × 3 )
= 60 Joules
Answer:
PE = 60 J
Explanation:
Where:
PEg or PE = gravitational potential energy
m = mass of an object
g = acceleration due to gravity
h = height of the object
brnaliest
A hiker travels 5.0 km north and then 2.5 km west What is the resultant displacement vector?
Answer: The resultant displacement vector is 5.6km
The resultant displacement vector of the hiker is equal to 5.6 km.
What is displacement?The distance can be described as the total length traveled by an object and is a scalar quantity with only magnitude. The distance should be always positive.
The displacement of an object can be described as the shortest length between two points. The displacement can be considered as a vector quantity with direction & magnitude. The displacement can be +ve, -ve, or zero and can be changed with time.
Given, a hiker moves 5.0 km along AB in the North and then 2.5 km west along BC.
The length (AC) is the resultant displacement that can be calculated by using Pythagoras' theorem:
AC² = AB² + BC²
AC² = (5.0)² + (2.5)²
AC² = 25 + 6.25
AC = 5.59 km ≈ 5.6 km
Therefore, the displacement of the hiker is 5.6 Km.
Learn more about displacement, here:
brainly.com/question/3243551
#SPJ2
In a Capacitor of 0.000031 F. a charge of 0.000022 C. exists between the plates.If the separation is 0.7 mm, What is the electric field?
Answer:
1014 V/m
Explanation:
C = 0.000031 F. Q = 0.000022 C, d = 0.7 mm,
V = Q/C = 0.000022/0.000031 = 0.7097 V
E = V/d = 0.7097/0.0007 = 1014 V/m
Select all statements that are true.
Sound waves travel faster in water than in air.
Sound waves travel faster in air than in water.
Sound waves travel fastest through solids.
Sound waves travel slowest through liquids.
9 А
3) A 5kg object is to be given an upward
acceleration of
of 0.3 m/s by a rope pulling
straight upward on it, what must be the
tension on the
the rope ?
Explanation:
9 А
3) A 5kg object is to be given an upward
acceleration of
of 0.3 m/s by a rope pulling
straight upward on it, what must be the
tension on the
the rope ?
PLEASE HELP! Will give BRAINILIEST! An amplifier can magnify the intensity of sound waves by a factor of 1,000. If a 30dB sound is fed into the amplifier, how many decibels will come out?
Answer:
30,000dB
Explanation:
30,000dB because 30 multiplied by a factor of 1000 is 30,000
Hope this helps! :)
A heavy liquid with a density 13 g/cm3
is
poured into a U-tube as shown in the lefthand figure below. The left-hand arm of the
tube has a cross-sectional area of 9.55 cm2
,
and the right-hand arm has a cross-sectional
area of 6.08 cm2
. A quantity of 90.8 g of a
light liquid with a density 0.86 g/cm3
is then
poured into the right-hand arm as shown in
the right-hand figure below.
h1
h2
9.55 cm2
6.08 cm2
heavy liquid
13 g/cm3
L
9.55 cm2
6.08 cm2
light liquid
0.86 g/cm3
Determine the height L of the light liquid
in the column in the right arm of the U-tube,
as shown in the second figure above.
Answer in units of cm.
Part 2
Find the pressure on the window.
Answer in units of N/m
Based on the data provided;
the height of the liquid, L is 17.2 cmthe pressure on the window is 1449.616 N/mWhat is the formula for density?The formula for calculating density is given as:
Density = mass/volumeFrom the formula above;
mass = density × volume
also, volume = area × height
Therefore,
mass = density × area × height
height = mass / (density × area)Calculating for the height of the liquid:
Height, L = 90.8 / (0.86 × 6.08)
L = 17.2 cm
What is pressure due to a liquid?The pressure due to a liquid is calculated using the formula below:
Pressure = hpgwhere;
h is height = 17.2 cm = 0.172 m
P is density = 0.86 g/cm^3 = 860 kg/m^3
g is acceleration due to gravity = 9.8 m/s^2
Pressure = 860 kg/m^3 × 0.172 m × 9.8 m/s^2
Pressure = 1449.616 N/m
Learn more about density and pressure at: https://brainly.com/question/16396974
You walk from chisale to st Francis a distance of 6km/h and 50minutes.Find the average speed in m/s
Answer:
[tex]{ \tt{average \: speed = \frac{distance}{time} }} \\ \\ { \tt{ = \frac{(6 \times 1000) \: m}{(50 \times 60) \: s} }} \\ \\ { \tt{ = \frac{6000}{3000} }} \\ \\ = { \underline{ \tt{ \: 2 \: {ms}^{ - 1} \: }}}[/tex]
You walk from chisale to st Francis a distance of 6km/h and 50minutes, the average speed in m/s will be 2m/s
What is average speed ?The average speed of a moving object is defined as the total distance covered by it divided by the total time taken.
The S.I unit of speed is meter per second. Speed is also measured in kilometer per hour.
Average speed is a scaler quantity
Average speed is the total distance travelled by an object to the total time taken. However, average velocity is the change in position or displacement (∆x) divided by the time intervals (∆t) in which the displacement occurs. No matter how many times the speed has been changed to travel the entire distance , average speed is that constant speed value with which one can travel by and reach the same distance in same amount of time .
It can be calculated with a formula average speed = distance / time
given
distance = 6 km = 6000 m
time = 50 minutes = 50 * 60 = 3000 sec
average speed = distance / time
= 6000 / 3000 = 2m/s
To learn more about average speed here
https://brainly.com/question/12322912?referrer=searchResults
#SPJ2
who is a meterologist?
Answer:
A meteorologist is a scientist who studies weather Explanation:
A meterologist is a scientist who studies the weather condition of an environment.
WHO IS A METEROLOGIST?A meteorologist is a scientist that specifies in the act of understanding and forecasting the atmospheric condition or weather of the Earth surface.
The branch of science that studies weather is called meteorology and a meterologist uses several techniques and tools to explain weather.
Therefore, a meterologist is a scientist who studies the weather condition of an environment.
Learn more about meterologist at: https://brainly.com/question/13719412
Brainliest if correct Question 2 of 10
What two types of energy does a rock have as it rolls down a hill?
O A. Sound energy
B. Potential energy
c. Nuclear energy
D. Kinetic energy
E. Magnetic energy
SUBMI
Answer:
b and d
Explanation:
What is the most important reason that astronomers have learned more about our planetary system in the last 30-40 years than all of history before then.
what is the meaning of energy
Answer:
Energy by definition is the property of matter that involves interactions with molecules, in order to perform an action.
Explanation:
They're many different types of energy, a few of them are...
. Thermal energy
. Solar energy
. Chemical energy
. Kinetic energy
. Potential energy
. Mechanical energy to name a few...
All of these specific energies involve the interaction of molecules which are used for different things and can be converted from one type of energy to another.
Hope this helps.
How much force is needed to pull a spring with a spring constant of 20 N/m a distance of 25 cm?