what is the ph of the buffer solution that contains 1.8 g of in 250 ml of 0.12 m ? is the final ph lower or higher than the ph of the 0.12 m ammonia solution? ( Kb for ammonia is 1.8 x 10^-5.)pH of the buffer = ______

The values for pKα1 and pKα2 are 4.60 and 7.24, respectively, and the values for Kα1 and Kα2 are 2.51 x 10^(-5) and 6.31 x 10^(-8), respectively.

To calculate the pKα1 and pKα2 values, we need to first understand the concept of equivalence points. In an acid-base titration of a dibasic acid, there are two equivalence points, where each mole of acid has reacted with an equal number of moles of base. At the first equivalence point, half of the acid has reacted, and at the second equivalence point, all of the acid has reacted.

The pH at the first equivalence point can be used to calculate pKα1, which represents the dissociation constant for the first proton. Using the Henderson-Hasselbalch equation, we have:

pH = pKα1 + log([A-]/[HA])
where [A-] and [HA] represent the concentrations of the conjugate base and the undissociated acid, respectively. At the first equivalence point, the concentration of the acid is equal to the concentration of the conjugate base, so we can simplify the equation to:

pH = pKα1 + log(1)

which gives us:   pKα1 = pH
So, pKα1 = 4.60.

Similarly, we can use the pH at the second equivalence point to calculate pKα2, which represents the dissociation constant for the second proton. Using the same equation, we get:

pKα2 = pH = 7.24.
To calculate the Kα values, we can use the equation:

Kα = 10^(-pKα)

So, Kα1 = 10^(-4.60) = 2.51 x 10^(-5) and Kα2 = 10^(-7.24) = 6.31 x 10^(-8).

To know more about pH refer to

https://brainly.com/question/172153

#SPJ11

To determine the grams of ferric chloride (FeCl3) formed when 10.00g of iron metal reacts with 0.50g Cl2 gas, we first need to find the limiting reactant.

The balanced chemical equation for this reaction is:
2 Fe (s) + 3 Cl2 (g) → 2 FeCl3 (s)

First, convert the grams of each reactant to moles:

As moles = weight / molecular mass
- Moles of Fe: 10.00g / (55.85g/mol) ≈ 0.179 moles
- Moles of Cl2: 0.50g / (70.90g/mol) ≈ 0.00705 moles

Next;

To find the moles of each reactant present in the given reaction, divide the moles of each reactant by their respective stoichiometric coefficients present in the balanced chemical equation:
- Fe: 0.179 moles / 2 ≈ 0.0895
- Cl2: 0.00705 moles / 3 ≈ 0.00235

As per the balanced chemical equation, 3 moles of chlorine is required to react with 2 moles of iron for forming 2 moles of iron chloride.

Since 0.00235 is smaller than 0.0895, therefore Cl2 is the limiting reactant.

Now, using the stoichiometry of the balanced equation, the moles of FeCl3 formed are;
- Moles of FeCl3 = 0.00705 moles Cl2 × (2 moles FeCl3 / 3 moles Cl2)

                           = 0.00470 moles

Finally, convert moles of FeCl3 to grams:
- Grams of FeCl3 = 0.00470 moles × (162.20g/mol) ≈ 0.76g

Therefore, approximately 0.76 grams of ferric chloride (FeCl3) will be formed in this reaction.

https://brainly.com/question/31485414

#SPJ11

The crystallization of sodium acetate involves the process of dissolving the sodium acetate in water and then allowing it to cool down slowly.

The reaction to this process is:

NaC₂H₃O₂ + H₂O → Na+(aq) + C₂H₃O₂⁻(aq)

This process is enthalpy driven, as the heat is released when the sodium acetate dissolves in water.

The dissolving process is exothermic, meaning it releases heat energy. As the solution cools down, the solubility of sodium acetate decreases, leading to the formation of crystals. This process is known as supersaturation, and it is driven by the decrease in entropy, as the dissolved sodium acetate molecules organize themselves into a crystalline structure. Therefore, although the process is both enthalpy and entropy-driven, it is mainly enthalpy-driven.

Learn more about enthalpy driven at https://brainly.com/question/9289582

#SPJ11

The alkyl bromide, Br -OH, the major products of dehydrohalogenation is H₂O and he minor product is HBr (Hydrogen bromide).

In general, dehydrohalogenation of an alkyl bromide (R-Br) with a strong base (such as KOH) can result in the formation of an alkene (R=CH₂) and HBr. The major product is the alkene with the most substituted double bond (i.e. the one with more alkyl groups attached to the carbon-carbon double bond), while the minor product is the alkene with the least substituted double bond (i.e. the one with fewer alkyl groups attached to the carbon-carbon double bond).

Learn more about dehydrohalogenation: https://brainly.com/question/31285083

#SPJ11

Yes, it is possible for fatty acid chains to be broken down to produce ATP in the absence of oxygen. This process is called anaerobic respiration or fermentation.

During anaerobic respiration, the fatty acid chains are broken down into smaller molecules, such as acetyl-CoA, which enters the Krebs cycle to produce ATP. However, the amount of ATP produced through anaerobic respiration is much less compared to aerobic respiration. In the absence of oxygen, the breakdown of fatty acids involves:

1. Beta-oxidation: Fatty acid chains undergo beta-oxidation in the mitochondria, where they are broken down into two-carbon units called acetyl-CoA. This process also generates NADH and FADH2, which are electron carriers.

2. Anaerobic glycolysis: Since there is no oxygen available, the acetyl-CoA cannot enter the citric acid cycle (TCA cycle) for further oxidation. Instead, the cell relies on anaerobic glycolysis, which converts glucose into pyruvate and generates a small amount of ATP.

3. Fermentation: Pyruvate is then converted into lactate in a process called fermentation. This regenerates NAD+ from NADH, allowing glycolysis to continue and producing additional ATP.

Although fatty acid chains can be broken down to produce ATP in the absence of oxygen, this process is less efficient compared to aerobic metabolism, which involves the citric acid cycle and the electron transport chain, both of which require oxygen and generate a larger amount of ATP.

More on fatty acids: https://brainly.com/question/6761923

#SPJ11

To calculate the pH of the solution, we need to first consider the dissociation of HF in water. HF is a weak acid and will partially dissociate into H+ and F-. The dissociation constant, or Ka, for HF is 7.24 x 10^-4.

The equation for the dissociation of HF can be written as:

HF + H2O ⇌ H3O+ + F-

At equilibrium, the concentrations of HF, H3O+ and F- can be represented by [HF], [H3O+] and [F-], respectively.

Using the Ka expression for HF, we have:

Ka = [H3O+][F-]/[HF]

We can simplify this expression by assuming that x moles of HF dissociate into x moles of H3O+ and F-. Thus, at equilibrium, the concentration of H3O+ and F- is x, and the concentration of undissociated HF is [HF] - x.

Substituting these values into the Ka expression, we get:

Ka = x^2/([HF] - x)

Solving for x, we get:

x^2 + Kax - Ka[HF] = 0

Using the quadratic formula, we get:

x = (-Ka ± sqrt(Ka^2 + 4Ka[HF]))/2

We can then calculate the concentration of H3O+ at equilibrium, which is equal to x.

pH is defined as the negative logarithm of the concentration of H3O+:

pH = -log[H3O+]

Therefore, we can calculate the pH of the solution using the concentration of H3O+ that we just calculated.

Plugging in the values given in the problem, we get:

[tex]Ka = 7.24 x 10^-4[HF] = 1.00 M[F-] = 0.20 M[/tex]

Calculating x using the quadratic formula, we get:

x = 0.037 M

Therefore, the concentration of H3O+ is also 0.037 M, and the pH of the solution is:

pH = -log(0.037) = 1.43

So the pH of the solution is 1.43.

Learn more about pH    here:

https://brainly.com/question/15289741

#SPJ11

The original concentration of the Sr(OH)₂ sample before the titration was 0.656 M before being titrated with 0.747m  HBr.

To determine the original concentration of the Sr(OH)₂ sample before titration, you can follow these steps:

1. Write the balanced chemical equation:
Sr(OH)₂ + 2 HBr → SrBr₂ + 2 H₂O

2. Identify the volume and molarity of HBr (134 mL and 0.747 M).

3. Calculate the moles of HBr used in the titration:
moles_HBr = (volume_HBr) * (molarity_HBr)
moles_HBr = (134 mL) * (0.747 mol/L)
moles_HBr = 100.118 mol

4. Determine the mole ratio between Sr(OH)₂ and HBr from the balanced equation (1:2).

5. Calculate the moles of Sr(OH)₂:
moles_Sr(OH)₂ = (moles_HBr) / 2
moles_Sr(OH)₂ = (100.118 mol) / 2
moles_Sr(OH)₂ = 50.059 mol

6. Determine the original volume of the Sr(OH)₂ sample (76.29 mL).

7. Calculate the original concentration of the Sr(OH)₂ sample:
concentration_Sr(OH)₂ = (moles_Sr(OH)₂) / (volume_Sr(OH)₂)
concentration_Sr(OH)₂ = (50.059 mol) / (76.29 mL)
concentration_Sr(OH)₂ = 0.656 M

Therefore, the original concentration of the Sr(OH)₂ sample before the titration was 0.656 M.

To view more examples of finding original concentration Sr(OH)2 before being titrated with HBr, visit: https://brainly.com/question/27515846

#SPJ11

The starting materials of dibenzalacetone synthesis are all colorless. A situation that would cause no change in color of the reaction mixture is c. 3/an excess of benzaldehyde present in the reaction mixture.

Excess benzaldehyde would not be completely consumed during the reaction, leaving a significant amount of unreacted colorless benzaldehyde in the final mixture. In contrast, using only one equivalent of benzaldehyde (option 1) may lead to incomplete reaction and formation of intermediate products, possibly resulting in a change of color.

Additionally, the presence of benzoic acid in the reaction mixture (option 2) could cause a change in color due to the formation of colored side products or interference with the reaction. Therefore, an excess of benzaldehyde in the reaction mixture is the most likely situation to cause no change in color of the dibenzalacetone synthesis reaction mixture. The starting materials of dibenzalacetone synthesis are all colorless. A situation that would cause no change in color of the reaction mixture is c. 3/an excess of benzaldehyde present in the reaction mixture.

Learn more about benzoic acid at:

https://brainly.com/question/28326761

#SPJ11

According to the rule of conservation of mass, mass does not change during a chemical reaction. answer is False.

A chemical reaction cannot create or remove mass (matter), according to the Law of Conservation of Mass.

Therefore, the combined mass of all the components in a chemical reaction should be the same as the combined mass of all the elements in the reactants.

In other words, the ratio of atoms of each element present in the reactants to those present in the products must be the same.

An object's mass is an intrinsic property, which means it is a component of the thing's structure and cannot be altered without altering the object itself. The measure of an item's resistance to a change in motion or direction, mass can also be thought of as the amount of inertia a thing has.

To  learn more about Mass, visit:

brainly.com/question/24191825

#SPJ1

The complete question is,

Write true or false. Correct the false statement.

The law of conservation of mass states that mass is created during a chemical reaction.

The given statement is false because if the spike was assigned bc, then he can not combine 8.00 ml of ammonium chloride and 4.00 ml of ammonia to make his buffer.

A buffer is a solution that can resist changes in pH when small amounts of acid or base are added to it. It consists of a weak acid and its conjugate base, or a weak base and its conjugate acid.

The buffer system consisting of ammonium chloride and ammonia requires specific concentrations of each component to maintain a stable pH. Simply combining 8.00 mL of ammonium chloride and 4.00 mL of ammonia may not necessarily result in the desired pH buffer solution. The actual concentrations required will depend on the desired pH of the buffer solution.

Therefore, additional calculations and adjustments may be necessary to prepare an effective buffer solution.

You can learn more about buffer solutions at

brainly.com/question/8676275

#SPJ11

In this balanced equation, the coefficient for Cu is 6. So the correct answer is: 6

In the given equation, the reaction is between copper (Cu) and nitric acid (HNO3), and the products formed are copper(II) nitrate (Cu(NO3)2), nitrogen monoxide (NO), nitrogen dioxide (NO2), and water (H2O). The ratio of NO to NO2 is given as 2:3.

To balance the equation, we need to ensure that the same number of atoms of each element are present on both sides of the equation. Here's how the equation is balanced:

6 Cu + 18 HNO3 → 6 Cu(NO3)2 + 4 NO + 6 NO2 + 6 H2O

The coefficient for Cu is 6, which means that 6 moles of Cu are reacting with the other species in the equation. This coefficient is chosen in such a way that it balances the equation, ensuring that there are 6 moles of Cu on both the reactant and product sides of the equation.

So, the correct answer for the coefficient of Cu in the balanced equation is 6. This means that 6 moles of Cu are required to react with 18 moles of HNO3 to produce 6 moles of Cu(NO3)2, 4 moles of NO, 6 moles of NO2, and 6 moles of H2O, while maintaining the given ratio of NO to NO2 (2:3).

To learn more about moles, refer below:

https://brainly.com/question/26416088

#SPJ11

Let's determine the signs of delta S (entropy change) and delta H (enthalpy change) for each process.

A) Solid sublimation:
Delta S: Positive (entropy increases as the solid changes to gas, which is more disordered)
Delta H: Positive (energy is absorbed for solid to transition into gas)

B) Lowering temperature of a solid by 25 degrees Celsius:
Delta S: Negative (entropy decreases as the solid becomes more ordered at lower temperatures)
Delta H: Negative (energy is released when cooling the solid)

C) Evaporation of ethanol from a beaker:
Delta S: Positive (entropy increases as liquid changes to gas, becoming more disordered)
Delta H: Positive (energy is absorbed for liquid ethanol to evaporate)

D) Diatomic molecule dissociating into atoms:
Delta S: Positive (entropy increases as the system becomes more disordered when molecules dissociate)
Delta H: Positive (energy is absorbed to break bonds in the diatomic molecule)

E) Combustion of charcoal to form CO2(g) and H2O(g):
Delta S: Positive (entropy increases as the solid reactant forms gaseous products)
Delta H: Negative (energy is released during combustion as it's an exothermic reaction)

To know more about Solid sublimation:

https://brainly.com/question/28626755

#SPJ11

The molal concentration of glucose in the solution is 1.05 mol/kg, expressed to three significant figures with appropriate units.

In order to find the molal concentration of glucose in the solution. We'll use the following terms: freezing point depression (ΔTf), molal freezing point depression constant (Kf), molality (m), and the freezing point of the solution.

Step 1: Calculate the freezing point depression (ΔTf).
ΔTf = Freezing point of pure water - Freezing point of the solution
ΔTf = 0.00 °C - (-1.95 °C) = 1.95 °C

Step 2: Use the freezing point depression formula.
ΔTf = Kf × m

Step 3: Solve for molality (m).
m = ΔTf / Kf
m = 1.95 °C / 1.86 °C/m = 1.048 m

To know more about "Molal concentration" refer here:

https://brainly.com/question/15930715#

#SPJ11

To ensure a reaction is first order overall with respect to all reactants in the context of rate determination and activation energy: write the rate law, conduct experiments, analyze the data, determine the rate constant  and verify the reaction order.

1. Write the rate law: The rate law is an equation that relates the reaction rate to the concentrations of the reactants. For a first-order reaction, the rate law is given by: Rate = k[A]^n, where k is the rate constant, [A] is the concentration of reactant A, and n is the order with respect to A.

2. Conduct experiments: Perform a series of experiments, varying the initial concentrations of the reactants while keeping other factors constant. Measure the reaction rates for each experiment.

3. Analyze the data: Plot the experimental data in a graph with the reaction rate on the y-axis and the reactant concentration on the x-axis. If the graph is linear, it indicates a first-order reaction.

4. Determine the rate constant (k): From the slope of the linear plot, calculate the rate constant k. This constant is temperature-dependent and relates to the activation energy (Ea) through the Arrhenius equation: k = A × e^(-Ea/RT), where A is the pre-exponential factor, R is the gas constant, and T is the temperature in Kelvin.

5. Verify the reaction order: To confirm that the reaction is first order overall, the sum of the exponents in the rate law (i.e., the reaction order with respect to each reactant) should equal 1.

By following these steps, you can determine if a reaction is first order overall with respect to all reactants and explore its relationship with activation energy.

More on activation energy: https://brainly.com/question/28872439

#SPJ11

The relationship demonstrated is the orbit of the Earth around the Sun. The ball represents the Sun and the string represents the gravitational force that keeps the Earth in its elliptical path around the Sun.

Relationship building is the process of establishing and maintaining relationships with people from and outside your network. Usually, people aim to build relationships with those who can help them achieve their goals or will support their mission.

Having strong relationship-building skills also means being able to approach and connect with others while keeping an open mind when communication difficulties arise.

Furthermore, it requires strong networking and teamwork skills, as they are necessary for all types of interpersonal communication.

And because relationship-building is considered a soft skill, we advise you to abstain from listing it in your resume’s skills’ section. Instead, show attention to detail and prove you’re a confident communicator who’s always up for a challenge.

To know more relationship demonstrated click this link-

brainly.in/question/26928952

#SPJ11

The change in free energy (ΔG) of a coupled reaction is the sum of the ΔG values for each individual reaction. In this case, the cellular reaction has a ΔG of 8.5 kcal/mol and the hydrolysis of a single molecule of ATP has a ΔG of -7.3 kcal/mol. True

Therefore, the ΔG for the coupled reaction would be:

ΔG_total = ΔG_cellular reaction + ΔG_ATP hydrolysis

ΔG_total = 8.5 kcal/mol + (-7.3 kcal/mol)

ΔG_total = 1.2 kcal/mol

Since the ΔG for the coupled reaction is positive (1.2 kcal/mol), this means that the reaction is not spontaneous and requires energy input. The hydrolysis of a single molecule of ATP provides enough energy to drive the cellular reaction forward, making it an effective coupling.

Learn more about hydrolysis

https://brainly.com/question/11461355

#SPJ4

The correct answer is (b) changing a bond to a lone pair. This will change the molecule geometry because the lone pair will repel the other electrons in the molecule, causing the bond angles to shift and the overall shape of the molecule to change.

Changing a single bond to a double bond will not necessarily change the molecule geometry if the other bonds remain the same, so option (a) is incorrect. Option (c) is incorrect because only changing a bond to a lone pair will change the molecule geometry, not both actions. Option (d) is also incorrect because changing a bond to a lone pair will change the molecule geometry.
a. changing a single bond to a double bond
b. changing a bond to a lone pair
c. both
d. neither
Both changing a single bond to a double bond and changing a bond to a lone pair will change the molecule geometry. This is because each of these changes affects the electron distribution and repulsion forces around the central atom, leading to a change in the overall shape of the molecule.

Visit here to learn more about bond angles:

brainly.com/question/13751116

#SPJ11

The correct answer is D.

This is because the dissociation of hydrogen is an endothermic reaction, meaning it requires energy to break the bond between the two hydrogen atoms. Therefore, it will not be spontaneous at any temperature, as energy must be supplied in order for the reaction to occur.

To know more about an endothermic reaction:

https://brainly.com/question/23184814

#SPJ11

A buffer solution contains an equivalent amount of acid and base. The pH of the solution with an acid dissociation constant (pKa) value of 3.75 is 3.82, the pH of the formic acid buffer solution is approximately 3.61.

The amount of hydrogen or the proton ion in the solution is expressed by the pH. It is given by the sum of pKa and the log of the concentration of acid and bases.

The equation for the ionization of formic acid is:

HCOOH (aq) ⇌ H+ (aq) + HCOO- (aq)

The Ka expression for formic acid is:

Ka = [H+][HCOO-]/[HCOOH]

We know that the pKa of formic acid is 3.75, which means:

pKa = -log(Ka)

3.75 = -log(Ka)

Ka = 10(-3.75)

Ka = 1.78 × 10(-4)

We are given the concentrations of formic acid and formate ion in the buffer solution:

[HCOOH] = 0.18 M

[HCOO-] = 0.13 M

To find the pH of the buffer, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([HCOO-]/[HCOOH])

pH = 3.75 + log(0.13/0.18)

pH = 3.75 - 0.14

pH = 3.61

To know more about concentration visit:-

https://brainly.com/question/10725862

#SPJ1

A buffer solution contains an equivalent amount of acid and base. The pH of the solution with an acid dissociation constant (pKa) value of 3.75 is 3.82, the pH of the formic acid buffer solution is approximately 3.61.

The amount of hydrogen or the proton ion in the solution is expressed by the pH. It is given by the sum of pKa and the log of the concentration of acid and bases.

The equation for the ionization of formic acid is:

HCOOH (aq) ⇌ H+ (aq) + HCOO- (aq)

The Ka expression for formic acid is:

Ka = [H+][HCOO-]/[HCOOH]

We know that the pKa of formic acid is 3.75, which means:

pKa = -log(Ka)

3.75 = -log(Ka)

Ka = 10(-3.75)

Ka = 1.78 × 10(-4)

We are given the concentrations of formic acid and formate ion in the buffer solution:

[HCOOH] = 0.18 M

[HCOO-] = 0.13 M

To find the pH of the buffer, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([HCOO-]/[HCOOH])

pH = 3.75 + log(0.13/0.18)

pH = 3.75 - 0.14

pH = 3.61

To know more about concentration visit:-

https://brainly.com/question/10725862

#SPJ1

If one equivalent of Br2 (bromine) reacts with a given alkyne, the major product expected would be a trans-dibromoalkene.

This reaction, known as halogenation, involves the addition of two halogen atoms (in this case, bromine) to the triple bond of the alkyne. The addition of only one equivalent of Br2 leads to the formation of a vicinal dibromoalkene, with the two bromine atoms attached to adjacent carbon atoms.

In this halogenation process, the trans isomer is favored over the cis isomer due to steric hindrance. The trans configuration allows the bulky bromine atoms to be positioned further apart, thus reducing the repulsive forces between them. Consequently, the trans-dibromoalkene is the major product formed when one equivalent of Br2 reacts with an alkyne. If one equivalent of Br2 (bromine) reacts with a given alkyne, the major product expected would be a trans-dibromoalkene.

Learn more about halogen at:

https://brainly.com/question/30762905

#SPJ11

(a) Hydrogen can be placed in group 1 or group 7 of the periodic table depending on whether it loses or gains one electron, respectively.

(b) Ca has a greater ionization energy than K despite having the same number of electrons because the valence electron of Ca is in a 4s orbital, while the valence electron of K is in a 3s orbital.

(c) Cr has a very complex atomic spectrum because it has multiple valence electrons that can occupy different energy levels and orbitals.

(a) Hydrogen has only one electron, which occupies the 1s orbital. This electron can either lose its electron to form a cation (H+) or gain one electron to form an anion (H-). Hydrogen can be placed in group 1 or group 7 of the periodic table depending on whether it loses or gains one electron, respectively. In group 1, it would have a configuration of [He] 2s1, and in group 7, it would have a configuration of 1s2 2s2 2p5.

(b) The ionization energy of an atom is the amount of energy required to remove an electron from the atom. Ca has a greater ionization energy than K despite having the same number of electrons because the valence electron of Ca is in a 4s orbital, while the valence electron of K is in a 3s orbital. The 4s orbital is farther from the nucleus and has more shielding than the 3s orbital, which means that the electron is easier to remove from K than Ca.

(c) The atomic spectrum of an element is produced by the electrons transitioning between different energy levels. Na has a relatively simple atomic spectrum because it has only one valence electron, which is in the 3s orbital. This electron can be excited to higher energy levels, and when it falls back to the ground state, it emits energy in the form of a photon. Cr has a very complex atomic spectrum because it has multiple valence electrons that can occupy different energy levels and orbitals. The interactions between these electrons create a complex energy landscape, leading to a more intricate atomic spectrum. Additionally, the presence of unpaired electrons in Cr's d orbitals allows for additional transitions and spectral lines.

For more such questions on Hydrogen

https://brainly.com/question/24433860

#SPJ11

Simple distillation would be an effective means of separating hexane from all of the following solvents except mesitylene, as it has a boiling point higher than hexane's boiling point of 69 °C.

The other solvents listed have boiling points lower than hexane's boiling point, making them separable through simple distillation. Simple distillation is a method of separating liquids based on their boiling points, where the liquid with the lower boiling point vaporizes first and is collected as a distillate.

If the components of a mixture have very different boiling points from one another, distillation, a process of liquid purification, can separate the components. In a distillation, a liquid is heated in a "distilling flask," and the vapours then go to another area of the device and come into touch with a cool surface. On this cool surface, the vapours condense, and the condensed liquid—referred to as the "distillate"—drips into a reservoir apart from the original liquid. Simply put, distillation is the process of heating a liquid, condensing the gas, and then collecting the liquid in a different location.

To know more about Simple distillation click here:

https://brainly.com/question/29037176

#SPJ11

The simple distillation would not be an effective means of separating hexane from mesitylene because the boiling point of mesitylene (166 °C) is significantly higher than that of hexane (69 °C).Option (a)

The other solvents listed have boiling points lower than hexane's boiling point, making them separable through simple distillation. Simple distillation is a method of separating liquids based on their boiling points, where the liquid with the lower boiling point vaporizes first and is collected as a distillate.

If the components of a mixture have very different boiling points from one another, distillation, a process of liquid purification, can separate the components. In distillation, a liquid is heated in a "distilling flask," and the vapors then go to another area of the device and come into touch with a cool surface. On this cool surface, the vapors condense, and the condensed liquid—referred to as the "distillate"—drips into a reservoir apart from the original liquid. Simply put, distillation is the process of heating a liquid, condensing the gas, and then collecting the liquid in a different location.

To know more about Simple distillation click here:

brainly.com/question/29037176

#SPJ4

Answer:

2.0 mol

Explanation:

[tex]HCl[/tex] : [tex]CaCl{2}[/tex]

   2  :   1

   4  :   [tex]x[/tex]

[tex]x[/tex] = 2 mol [tex]CaCl_{2}[/tex]

The average kinetic energy of a gas is given by the formula: KEavg = (3/2) kT. Average kinetic energy for fluorine, chlorine and bromine are found as [tex]6.56 × 10^-21 J, 6.56 × 10^-21 J and 6.56 × 10^-21 J[/tex] respectively.

Where KEavg is the average kinetic energy of the gas, k is the Boltzmann constant ([tex]1.38 × 10^-23 J/K[/tex]), and T is the temperature in Kelvin.

For F2:

[tex]KEavg = (3/2) kTKEavg = (3/2) (1.38 × 10^-23 J/K) (310 K)KEavg = 6.56 × 10^-21 J[/tex]

For Cl2:

[tex]KEavg = (3/2) kTKEavg = (3/2) (1.38 × 10^-23 J/K) (310 K)KEavg = 6.56 × 10^-21 J[/tex]

For Br2:

[tex]KEavg = (3/2) kTKEavg = (3/2) (1.38 × 10^-23 J/K) (310 K)KEavg = 6.56 × 10^-21 J[/tex]

It is worth noting that the average kinetic energy of a gas is directly proportional to its temperature. As the temperature increases, the average kinetic energy of the gas increases.

This is because as the temperature increases, the molecules move faster and collide more frequently, resulting in an increase in kinetic energy.

Additionally, the formula assumes that the gas molecules are ideal, meaning that they have no intermolecular forces and occupy no volume. In reality, gas molecules do have intermolecular forces and occupy some volume, but these assumptions are valid for most gases under normal conditions.

Know more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ11

The unknown likely contains sulfate ions (SO42-) and chloride ions (Cl-). The lack of bubbles upon addition of HCl indicates the absence of carbonates and bicarbonates.  

The formation of a white precipitate upon addition of BaCl2 suggests the presence of sulfate ions, which form an insoluble precipitate of BaSO4. The formation of a white precipitate upon addition of AgNO3 indicates the presence of chloride ions, which form an insoluble precipitate of AgCl. Finally, the formation of a white precipitate upon addition of Na2C2O4 suggests the presence of calcium ions, which form an insoluble precipitate of CaC2O4.

Overall, the test results indicate the likely presence of both sulfate and chloride ions in the unknown sample.

learn more about sulfate ions here:

https://brainly.com/question/29363059

#SPJ11

The pH of the solution is approximately 4.73.

To find the pH of this solution, we first need to calculate the concentration of hydrogen ions (H+) in the solution. Since sodium acetate is a salt of a weak acid (acetic acid), it will undergo hydrolysis in water to produce hydroxide ions (OH-) and acetic acid.

The hydrolysis reaction is as follows:
CH3COO- + H2O ↔ CH3COOH + OH-

To calculate the concentration of H+ in the solution, we need to find the concentration of OH- produced by the hydrolysis of sodium acetate.

The concentration of sodium acetate is 0.60 M. Since sodium acetate completely dissociates in water, it will produce 0.60 M of acetate ions (CH3COO-).

Using the equilibrium constant expression for the hydrolysis of acetate ions:

Ka = [CH3COOH][OH-]/[CH3COO-]

We can rearrange the expression to solve for [OH-]:

[OH-] = Ka*[CH3COO-]/[CH3COOH]

Substituting the values given, we get:

[OH-] = 1.85×10^-5 * 0.60 / 0.65 = 1.72×10^-5 M

Since the solution is not purely acidic or basic, we cannot assume that [H+] = [OH-]. Instead, we need to use the equation:

pH = pKa + log([base]/[acid])

where [base] is the concentration of acetate ions (0.60 M) and [acid] is the concentration of acetic acid (0.65 M).

The pKa for acetic acid is 4.75 (from a reference table or by calculating it using the equation Ka = 10^-pKa).

Substituting the values, we get:

pH = 4.75 + log(0.60/0.65) = 4.73

Therefore, the pH of the solution is approximately 4.73.

To learn more about pH visit;

brainly.com/question/15289741

#SPJ11

CFC, a dangerous chemical, plays a role in environmental ozone layer depletion.

Chlorofluorocarbon gases are released from the sprays of the aerosols like fridges or propellants that reduce the thickness of the O₃. This ozone destruction may let more harmful UV radiation to reach the Earth's surface, causing a number of environmental and health problems.

CFCs have been mostly phased out under the Montreal Protocol, an international pact ratified by over 190 nations that aims to safeguard the ozone layer by limiting ozone-depleting chemical production and use.

To know more about ozone depletion, visit,

https://brainly.com/question/29795386

#SPJ4

The Kb of methylamine is 4.4 × 10⁻⁴.

The pH of a 0.35 M aqueous solution of CH₃NH₂ (methylamine) can be determined using the Henderson-Hasselbalch equation. The Henderson-Hasselbalch equation states that the pH of a solution can be determined by taking the negative logarithm of the base-to-acid ratio.

In this case, the base-to-acid ratio is equal to the concentration of the base, CH₃NH₂, divided by the acid, CH₃NH³+. The acid dissociation constant, Kb, is then used to calculate the concentration of the acid. The Kb of methylamine is 4.4 × 10⁻⁴.

After plugging in the appropriate values into the Henderson-Hasselbalch equation, the pH of the solution can be calculated to be 12.09. This indicates that the solution is basic in nature, as all pH values greater than 7 are considered to be basic.

Know more about Henderson-Hasselbalch here

https://brainly.com/question/13423434#

#SPJ11

The pH of the solution prepared by adding 2.0 mL of 0.020 M NaOH to 10.0 mL of water is approximately 11.52.

The pH of the solution can be calculated using the following steps:

1: Calculate the moles of NaOH added.

Moles of NaOH = concentration of NaOH × volume of NaOH added

Moles of NaOH = 0.020 M × 0.0020 L = 4.0 x 10⁻⁵ moles

2: Calculate the total volume of the solution.

Total volume of solution = volume of water + volume of NaOH added

Total volume of solution = 0.010 L + 0.0020 L = 0.012 L

3: Calculate the concentration of hydroxide ions (OH-) in the solution.

Concentration of OH- = moles of NaOH / total volume of solution

Concentration of OH- = 4.0 x 10⁻⁵ moles / 0.012 L = 3.33 x 10⁻³ M

4: Calculate the pOH of the solution.

pOH = -log[OH-]

pOH = -log(3.33 x 10⁻³) ≈ 2.48

Step 5: Calculate the pH of the solution.

pH = 14 - pOH

pH = 14 - 2.48 ≈ 11.52

You can learn more about pH at: brainly.com/question/15289714

#SPJ11

If a gas is cooled from 323.0 K to 273.15 K and the volume is kept constant, 0.77 atm is the final pressure, in atm, would result if the original pressure was 750.0 mmHg.

The force delivered perpendicularly to an object's surface per unit area across which the force is dispersed is known as pressure (symbol: p / P).[1]: 445  The pressure proportional to the surrounding air is known as gauge pressure, also spelt gauge pressure[a].

Pressure is expressed using a variety of units. Some of these are calculated by dividing a unit of force by a unit of area; for instance, the metric system's unit of pressure, a pascal (Pa), is equal to one newton every square metre (N/m2).

P₁/T₁  = P₂/T₂

P₂ = P₁T₂/T₁

  = 0.91 atm × 273.15 K / 323 K

  = 0.77 atm

To know more about pressure, here:

https://brainly.com/question/29341536

#SPJ1