What is the perimeter of this triangle?

[tex]V=lwh=(3)\left(\frac{4}{3} \right) \left(\frac{3}{5} \right)\\\\V=3\left(\frac{12}{15} \right)\\\\V=\frac{36}{15}=\boxed{\frac{12}{5} \text{ cm}^{2}}[/tex]

Answer:

2?

Step-by-step explanation:

2 is the square root of 4 since 2×2=4

Answer:

2

4

Step-by-step explanation:

Because 2 × 2 = 4, we know that 2 is the square root of 4.

√4 = 2

it will print no, because B = 3 and not 2 so it will skip the print yes line.

Answer: B

Step-by-step explanation:

The angles add to 90 degrees if they are complementary, so:

[tex]x-2+2x+5=90\\3x+3=90\\3x=87\\x=29[/tex]

So, the angles measure 29-2=27 degrees and 2(29)+5=63 degrees.

The net present value is $305.73. The project should be accepted.

Using this formula

Net present value=Cashflow÷(1+Cost of capital)^ time

Let plug in the formula

Net present value=-$2,400+ ($630÷(1+.09)^1) + ($760÷(1+.09)^2) + ($800÷(1+.09)^3) + ($880 ÷(1+.09)^4) + ($380÷(1+.09)^5)

Net present value=-$2,400+ ( $630÷(1.09)^1) + ($760÷(1.09)^2) + ($800÷(1.09)^3) + ($880 ÷(1.09)^4) + ($380÷(1.09)^5)

Net present value=-$2,400+ ($630÷1.09) + ($760÷1.1881) + ($800÷1.295029) + ($880 ÷1.41158161) + ($380÷1.538639549)

Net present value=-$2,400+ $577.98+$639.68+$617.75+623.41+$246.91

Net present value=$305.73

Based on the above calculation the project should be accepted.

Therefore the NPV is $305.73.

Learn more about net present value here:https://brainly.com/question/13228231

#SPJ1

Answer:

7 years

Step-by-step explanation:

Your equation should read     = 200 * e^(.08 t)  =  350

    solving for t       = 6.99 yrs     ~~ 7 years

Answer:

[tex] \boxed{\rm \: Volume_{(Cylinder)} \approx \: 307.7 \: m {}^{3} } ( \rm \: nearest \: tenth )[/tex]

Step-by-step explanation:

Given:

To Find:

Solution:

Use the formulae of the volume of cylinder:

[tex] \boxed{\rm \: Volume_{(Cylinder)} = \pi{r} {}^{2} h}[/tex]

where,

According to the question:

Substitute the values onto the formulae in order to find out the volume:

[tex] \rm \: Volume_{(Cylinder)} = \pi(7) {}^{2} (2)[/tex]

[tex] \rm \: Volume_{(Cylinder)} = \pi(49)(2)[/tex]

[tex]\rm \: Volume_{(Cylinder)} = 98\pi[/tex]

[tex]\rm \: Volume_{(Cylinder)} = \: 98 \times 3.14[/tex]

[tex]\rm \: Volume_{(Cylinder)} = 307.72 \: m {}^{3} \: (exact \: form)[/tex]

[tex] \boxed{\rm \: Volume_{(Cylinder)} \approx \: 307.7 \: m {}^{3} } \: ( \rm nearest \: tenth )[/tex]

Hence,we can conclude that:

The volume of the cylinder is approximately

307.7m³.

Answer:

0.8p

Step-by-step explanation:

Hello!

As the questions states, 20% of p is 0.2p.

Simplifying the equation:

0.8p is also 80% of p, which can be translated to 100% - 20% of p.

The equivalent expression is 0.8p.

Answer:

x = 25

Step-by-step explanation:

the line QC is parallel to BR

Then

x/15 = 40/24

Then

24x = 40×15

Then

24x = 600

Then

x = 600/24

Then

x = 25

The angle of depression of the airplane is 39.8°, length of the runway is 45794 ft, and approximate height of the tower is 321 m.

The angle of depression of the airplane is given as follows:

Let the angle of depression be A.

[tex]A= {tan}^{ - 1} ( \frac{15000}{8000} ) = {39.8}^{o} [/tex]

Angle of depression is 39.8°.

If the angle of elevation is 6.8°, the length of the runway l is calculated thus:

horizontal distance of airplane from end of runway = d

length of runway, L = d - 80000 ft

[tex]d = \frac{15000}{tan 6.8°} = 125794 ft[/tex]

L = 125794 - 80000

L = 45794 ft

The length of the runway is 45794 ft

2. Let the height of the tower be H

[tex]H = \tan(69.8) \times 118 = 321m[/tex]

The approximate height of the tower is 321 m

Learn more about angle of elevation and depression at: https://brainly.com/question/15580615

#SPJ1

The Pattern B is the twice of the Pattern A.  Then the correct option is C.

The analysis of mathematical representations is algebra, and the handling of those symbols is logic.

Item 11 In the table,

Pattern A uses the rule "add 5" and Pattern B uses the rule "add 10".

Pattern A   10  15  20  25  30

Pattern B   20 30 40  50  60

Then the Pattern B is the twice of the Pattern A.

Then the correct option is C.

More about the Algebra link is given below.

https://brainly.com/question/953809

#SPJ1

The volume of the region R bounded by the x-axis is: [tex]\mathbf{\iint_R(x^2+y^2)dA = \int ^{tan^{-1}(4)}_{0} \int^{\frac{2}{cos \theta}}_{0} \ r^3 dr d\theta}[/tex]

The volume of a solid is the degree of space occupied by a solid object. If the axis of revolution is the planar region's border and the cross-sections are parallel to the line of revolution, we may use the polar coordinate approach to calculate the volume of the solid.

In the graph, the given straight line passes through two points (0,0) and (2,8).

Therefore, the equation of the straight line becomes:

[tex]\mathbf{y-y_1 = \dfrac{y_2-y_1}{x_2-x_1}(x-x_1)}[/tex]

where:

Thus, from the graph let assign (x₁, y₁) = (0, 0) and (x₂, y₂) = (2, 8), we have:

[tex]\mathbf{y-0 = \dfrac{8-0}{2-0}(x-0)}[/tex]

y = 4x

Now, our region bounded by the three lines are:

Similarly, the change in polar coordinates is:

where;

Now

Then:

[tex]\mathbf{\iint_R(x^2+y^2)dA = \int ^{tan^{-1}(4)}_{0} \int^{\frac{2}{cos \theta}}_{0} \ r^2 (rdr d\theta )}[/tex]

[tex]\mathbf{\iint_R(x^2+y^2)dA = \int ^{tan^{-1}(4)}_{0} \int^{\frac{2}{cos \theta}}_{0} \ r^3 dr d\theta}[/tex]

Learn more about the determining the volume of solids bounded by region R here:

https://brainly.com/question/14393123

#SPJ1

The x-intercept of the function [tex]h(x) = 8 * \sqrt[3]{x - 6} + 16[/tex] is -2

The equation of the function is given as:

[tex]h(x) = 8 * \sqrt[3]{x - 6} + 16[/tex]

The x intercept is the x value when h(x) = 0

So, we have:

[tex]8 * \sqrt[3]{x - 6} + 16 = 0[/tex]

Subtract 16 from both sides

[tex]8 * \sqrt[3]{x - 6} = -16[/tex]

Divide both sides by 8

[tex]\sqrt[3]{x - 6} = -2[/tex]

Take the cube of both sides

x - 6 = -8

Add 6 to both sides

x = -2

Hence, the x-intercept of the function [tex]h(x) = 8 * \sqrt[3]{x - 6} + 16[/tex] is -2

Read more about x-intercept at:

https://brainly.com/question/3951754

#SPJ1

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{a\% of b}\\ \cline{1-1} \\ \left( \cfrac{a}{100} \right)\cdot b \\\\ \cline{1-1} \end{array}~\hspace{5em}\stackrel{\textit{30\% of 45}}{\left( \cfrac{30}{100} \right)45}\implies 13.5~\hfill \underset{final~cost}{\stackrel{45~~ - ~~13.5}{31.5}}[/tex]

Answer:

17/8

Step-by-step explanation:

You must type 2* 8 and add 1. That makes 17/8

Hi student, let me help you out! :)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

We are asked to convert 2 1/8 into an improper fraction (a fraction whose numerator is greater than its denominator).

[tex]\triangle~\fbox{\bf{KEY:}}[/tex]

These are the steps:

However, we cannot simplify 17/8, so that's our answer.

Hope it helps you out! :D

Ask in comments if any queries arise.

#StudyWithBrainly

~Just a smiley person helping fellow students :)

[tex]\begin{array}{r|l}576&2\\288&2\\144&2\\72&2\\36&2\\18&2\\9&3\\3&3\\1\end{array}[/tex]

[tex]576=2^6\cdot3^2[/tex]

Therefore

[tex]4\sqrt{576}=4\sqrt{2^6\cdot3^2}[/tex]

Answer:

These are Vertical angles, adjacent angles are next to each other and make up a whole angle, while vertical angles are across and equal the same thing.

X = 81 because 84 and (x + 3) are the same so 84 minus 3 is 81

Hope that helps

Answer:

x<_-5

Step-by-step explanation:

-4(x+3)<_-2-2x

-4x-12<_-2-2x

-4x+2x<_-2+12

-2x<_10

-2x/-2<_10/-2

x<_-5

Answer:

9y

Step-by-step explanation:

Mathematicaly, the product of 9 and a number "y" is:

9y

Answer: Heyaa! ~

When simplifying (2x^2y)3 the answer will be...  6x²y

Step-by-step explanation:

    Multiply the numbers:

Hopefully this helps you! ^^

Answer:

  dilation by a factor of -1/2 about the center (6, 5)

  (x, y) ⇒ (9 -x/2, 7.5 -b/2)

Step-by-step explanation:

Figure B is half the size of Figure A. It has been rotated, and translated. The single transformation must have all of these effects.

__

The orientation of shape B is the same as that of shape A. The small extension from the rectangle still points counterclockwise relative to the figure's center. However, it points west instead of east, signifying a rotation of 180°. The same 180° rotation can be accomplished by a reflection across a point.

Shape B has half the dimensions of shape A. That means it has been dilated by a factor of 1/2. The reflection across a point can be accomplished by using a negative dilation factor.

The center of the dilation must reside between the two figures in order for "reflection across a point" to be accomplished. Each point on figure A must be twice as far from that center as the corresponding point on figure B.

Corresponding points are (1, 1) on figure A, and (8.5, 7) on figure B. The center of dilation divides the line between these points into the ratio 2:1. That center can be found as ...

  (a, b) = (2(8.5, 7) +(1, 1))/3 = (17+1, 14+1)/3 = (6, 5)

The single transformation that maps figure A to figure B is ...

  dilation by a factor of -1/2 about the center (6, 5)

  (x, y) ⇒ (9 -x/2, 7.5 -b/2)

The values of a, b and c from the given exponential function are 7, 9 and 4 respectively

According to the exponential law of indices

[tex]\sqrt[c]{a^b}[/tex]

This can be written as;

[tex]\sqrt[c]{a^b}=a^{\frac{b}{c} }[/tex]

Given the exponential expression

[tex]7^\frac{9}{4}[/tex]

Compare with the original expression

a = 7, b = 9 and c = 4

Hence the values of a, b and c from the given exponential function are 7, 9 and 4 respectively

Learn more on indices here: https://brainly.com/question/170984

#SPJ1

Answer:

8x^2 +6x +36xy^2+27y^2

Step-by-step explanation:

2x * 4x-2x*-3) -9y-^2(-4x)-9y^2(-3)

The given differential equation is not exact, if we convert it to an exact one, we get:

[tex]2ydx + 2*(x - sin(y)^{1/2})*dy = 0[/tex]

A differential equation:

[tex]Ndx + Mdy = C[/tex]

Is exact only if:

[tex]\frac{dM}{dy} = \frac{dN}{dx}[/tex]

In this case, we have:

[tex]2ydx + (x - sin(y)^{1/2})*dy = 0\\\\then:\\\\N = 2y\\M = x - sin(y)^{1/2}[/tex]

If we differentiate, we will get:

[tex]\frac{dN}{dy} = 2\\\\\frac{dM}{dx} = 1[/tex]

So, to convert this to an exact differential equation, we need to add a factor 2 to N, this will give:

[tex]2ydx + 2*(x - sin(y)^{1/2})*dy = 0[/tex]

This is, in fact, an exact differential equation.

If you want to learn more about differential equations:

https://brainly.com/question/18760518

#SPJ1

No, the cone and the cylinder can't have congruent heights and bases.

The volume of a cylinder of radius R and height H is:

V = pi*R^2*H

And for a cone of radius R and height H is:

V = pi*R^2*H/3

So, for the same dimensions R and H, the cone has 1/3 of the volume of the cylinder.

Here, the cylinder has a volume of 120cm³ and the cone a volume of 360cm³, so the cone has 3 times the volume of the cylinder.

This means that the measures must be different, so the cone and the cylinder can't have congruent heights and bases.

If you want to learn more about volumes:

https://brainly.com/question/1972490

#SPJ1

Answer:

Step-by-step explanation:

Answer:

Drivers located below mile marker 47 or at mile marker 70 or above never get pulled over.

Step-by-step explanation: