Answer:
Iron(III) nitrate
Explanation:
How do I solve this problem
Answer:
it is light
Explanation:
the arrow that says light is on the glass it must be near from tungsten
18. Why is the sun included in this model of the water cycle?
A. The water cycle takes place in the atmosphere and and since the sun can be
seen through the atmosphere it make the model more detailed
B. The sun is the driving force that provides the energy that keeps the water cycle
going
C. The water cycle takes place in the hydrosphere and since the sun makes it
possible for us to see everything it is included in the picture.
D. The sun is part of condensation and run-off
Answer:
b
Explanation:
1st grade common sense
The magnetic field B at all points within the colored circle of the figure (Figure 1) has an initial magnitude of 0.780 T. (The circle could represent approximately the space inside a long, thin solenoid.) The magnetic field is directed into the plane of the diagram and is decreasing at the rate of 0.0300 T/s.
a) What is the magnitude of the induced electric field at any point on the circular conducting ring with radius r = 0.100 m ?
b) What is the direction of this field at any point on the circular conducting ring?
c) What is the current in the ring if its resistance is 4.00 Ω ?
d) What is the emf between points a and b on the ring?
e) If the ring is cut at some point and the ends are separated slightly, what will be the emf between the ends?
The magnitude of the induced electrical field is 0.0015V/m, the field is pointing towards the clockwise direction while the current in the ring will be 0.0002355A if the resistance is 4 ohms. The emf between point a and b is zero and the EMF across the point if they're slightly separated between the ends is 0.000942V
To solve this question, we would have to go about each one individually
Data:
[tex]r=10cm=0.1m\\[/tex]
a.
The magnitude of the induced electrical field at any point within the radius is
[tex]\int\limits^a_b {E} \, du=\frac{dU}{dt}=\pi \frac{dB}{dt}=\pi r^{2}\frac{dB}{dt}\\E*2\pi r=\pi r^{2}\frac{dB}{dt} \\E=\frac{r}{2}\frac{dB}{dt}=\frac{0.1}{2}*0.03=0.0015V/m[/tex]
b.
The field is pointing towards the clockwise direction.
c.
The current in the ring if we are given a resistance of 4ohms
[tex]I=\frac{emf}{R}=\frac{\pi r^{2}\frac{dB}{dt} }{R} =\frac{\pi (0.1)^2*0.03}{4} =0.0002355A[/tex]
d.
The emf between point a and b is zero
e.
The EMF across two points if they're separated by small distance across the ring is
we would use the formula to solve for the EMF
[tex]E=\pi r^{2}\frac{dB}{dt}=\pi (0.1)^2*0.03=0.000942V[/tex]
https://brainly.com/question/9719792
Which of the following is damaging electromagnetic radiation?
a. Gamma Ray c. Ultraviolet
b. Visible Light d. X-rays
Explanation:
Which of the following electromagnetic waves is used in medicine to destroy cancer cells?
A. IR rays
B. Visible rays
C. Gamma rays
D. Ultraviolet rays
Answer
VerifiedVerified
105.9k+ views
Hint: Electromagnetic rays that have a high frequency and highest-energy photons such that their energy is enough to penetrate several centimetres of lead is used to destroy cancer cells.
Complete step by step answer:
Electromagnetic waves with wavelengths shorter than about 100-trillionths of a meter are called gamma rays. They are used in a technique called radiation therapy to kill diseased cells in the human body. A beam of gamma rays can damage the biological molecules in living cells, causing both healthy and diseased cells to die. By carefully controlling the amount of gamma ray radiation and focusing it on the diseased area, the damage to healthy cells can be reduced during treatment.
So, the correct answer is “Option C”.
Additional Information: A. Infrared rays are used to form images of objects. Remote control and CD-drives also used infrared waves.
B. Visible light is the light that we can detect with our eyes. The spectrum of visible light shows all colours of light from long wavelength red to short wavelength violet.
D. Ultraviolet rays provide vitamin D for the body. They are also used to disinfect food, water and medical supplies. If Ultraviolet rays enter a cell, they can damage the DNA.
Note: Apart from Gamma rays, X-rays are also used in radiation therapy to kill diseased cells in the human body. X-rays are also used to form images of bones and teeth and in airport screening devices to examine contents of luggage.
hope this passage helps I don't know Its correct answer ..... its from my school PDF
Answer:
Gamma rays
Explanation:
NOTE: The higher the frequency of the radiation, the more damage it is likely to cause to the body: infrared radiation is felt as heat and causes skin to burn.
If correct please give brainliest
Stay safe and healthy
Thank You
consider a throw ball to the air ,whre lagragian is given by ,L( m /2+Y^ '2 +Z^' 2 ]- msz, find the two concider momuntum when it is invariant under translation at x&x+E and y&yE(both x and y are cyclic cordinate)
Explanation:
ANDSHESAIDSHESAIDSHESAID☹️ SHE'S FROMHAWAIIYOUKNOWHOWTOSPEAKCUTEIN JAPANESE KAWAII
Which type of muscle cell can have multiple nuclei
Answer:
Skeletal muscle cells
Explanation:
Skeletal muscle cells are long, cylindrical, and striated. They are multi-nucleated meaning that they have more than one nucleus. This is because they are formed from the fusion of embryonic myoblasts.
pls mark me the brainliest
Ginny is snowboarding down a ski slope. Her total mass (including the snowboard) is 68.5 kg. When she reaches the bottom of the slope, she is moving at 6.55 m/s. The coefficient of friction between the snowboard and the ground is 0.088 . How fast will Ginny be moving 2 seconds after reaching the bottom of the slope?
1) 5.71 m/s
2)5.91 m/s
3)4.82 m/s
4)4.08 m/s
Answer:
Explanation:
Assuming the run out at the bottom of the slope is horizontal
μ = Ff/N = Ff/mg
Ff = μmg
a = Ff/m = μmg/m = μg
v = u + at
v = u + μgt
v = 6.55 - 0.088(9.81)(2)
v = 4.82 m/s
After reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).
What is Friction?Friction is the force which opposes the relative motion of solid surfaces, fluid layers, and material elements that are sliding against each other. There are many types of friction like
Dry frictionFluid frictionLubricated friction Skin friction Internal frictionFriction can be expressed as
Ff = μFN
where, Ff is the force of friction (N)
μ is the coefficient of friction.
FN is the normal force
As per the above equation, it is actually the normal force, not the weight, which is responsible for friction.
For given information,
Assuming the bottom of the slope is horizontal
So, μ = Ff/N = Ff/mg
Ff = μmg
a = Ff/m = μmg/m = μg
v = u + at (u- initial speed, v= final speed, a= acceleration and t= time)
v = u + μgt (g= acceleration due to gravity)
u = 6.55 - 0.088(9.81)(2)
u = 4.82 m/s
Thus, after reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).
Learn more about Friction, here:
https://brainly.com/question/13000653
#SPJ2
Who did the ram caught in the thicket (Genesis 22:13) represent?
Answer:
I'm no Bible person, but I think it stands for i-dont-give-a-donkey-poop.
and suck-dog-nuts.
when the tides are especially weak it is called a _____ tide
Answer:
When the tides are especially weak, it is called a NEAP tide.
Explanation:
Hope this helps :)
Answer:
Neap
Explanation:
Answered!
A block of mass m=10 kg at rest slides down a rough incline plane of θ=30° and length l=5 m. The coefficient of kinetic friction between the block and the incline is μ_k=0.1. At the bottom of the plane the block continues to slide on a frictionless surface and hits a spring with spring constant k=100 N/m.
The speed of the block at point B = 6.36 m/s
Given data :
Mass ( m ) = 10 kg
Angle of inclination ( θ ) = 30°
Length of incline = 5 m
Determine the speed of the block at a point B on the incline
First step : Calculate the work done by frictional force
given that there is no friction on the horizontal plane. Vinclined = Vhorizontal
∴ Work done by frictional force ( Wf ) = F * L cos 180
= - ( μ_k * N ) L
= - (0.1 * 84.86 ) * 5 = - 42.4 Joule
where N = mg cos 30°
= 10 * 9.8 * 0.866 = 84.86
Next step : Calculate the speed of the block at point B
applying work energy theorem
Wf = ΔK.E + ΔP.E
= ( 1/2 mv² - 0 ) + ( 0 - mgh )
∴ - 42.48 = 1/2 mv² - mgh
1/2 mv² = mgh - 42.48
= 10 * 9.8 * 5 sin 30° - 42.4
v² = 40.52
V ( speed of the block at point B ) = 6.36 m/s
Hence we can conclude that the speed of the block at point B = 6.36 m/s
Learn more about speed on frictionless surface : https://brainly.com/question/9968388
Attached below is the complete question related to your question
An RLC circuit is used in a radio to tune into the radio lagos fm Station broadcasting at 93.5Hz. The resistance is 15ohms and the inductance is 1.6 H. Calculate the capacitance used
The characteristics of the RLC circuit allow to find the result for the capacitance at a resonance of 93.5 Hz is:
Capacitance is C = 1.8 10⁻⁶ F
A series RLC circuit reaches the maximum signal for a specific frequency, called the resonance frequency, this value depends on the impedance of the circuit.
[tex]Z^2 = R^2 + ( wL - \frac{1}{wC} )^2[/tex]
Where Z is the impedance of the circuit, R the resistance, L the inductance, C the capacitance and w the angular velocity. The negative sign is due to the fact that the current in the capacitor and the inductor are out of phase.
In the case of resonance, the impedance term completes the circuit as a resistive system.
[tex]wL - \frac{1}{wC} = 0 \\w^2 = \frac{1}{LC}[/tex]
Indicate that the inductance L = 1.6 H and the frequency f = 93.5 Hz.
Angular velocity and frequency are related.
w = 2π f
Let's substitute.
[tex]C = \frac{1}{L ( 2 \pi f)^2 }[/tex]
Let's calculate.
[tex]C = \frac{1}{1.6 \ ( 2\pi \ 93.5)^2}[/tex]
C = 1.8 10⁻⁶ F
In conclusion with the characteristics of the RLC circuits we can find the result for the capacitance at a 93.5 Hz resonance is:
Capacitance is C = 1.8 10⁻⁶ F
Learn more about serial RLC circuits here: brainly.com/question/15595203
The earth has a mass of 5.972 x 1024 Kg. You decide to
put the satellite in an orbit 400 Km above the surface of the earth which has a radius of 6,371 Km, so the total
distance from the center of the earth to the satellite is 6,771,000 m. What will you need the velocity of the
satellite to be to stay in orbit? Show your work
Answer:
Explanation:
You want the required centripetal force to equal gravity force
if m is the mass of the satellite
ma = mv²/R
a = v²/R
F = ma = GMm/R²
a = GM/R²
v²/R = GM/R²
v² = GM/R
v = √(GM/R)
v = √(6.674 x 10⁻¹¹(5.972 x 10²⁴)/6.771 x 10⁶)
v = 7.672 x 10³ m/s
A 2.8 kg rectangular air mattress is 2.00 m long, 0.500 m wide, and
0.100 m thick. What mass can it support in water before sinking?
160 m long When a truck ulls
Mass the air mattress support before sinking will be M = 97.2 kg
What will be the mass mattress will support?Given that
mass of mattress m=2.8 kg
Length = 2.00 m
width =0.5 m
The mattress can support a total weight that is equal to the weight of water that the air mattress displaces.
The volume of the air mattress will be equal to
[tex]V= (2\times 0.5\times 0.1)[/tex]
[tex]V= 0.1 m^{3}[/tex]
This volume is equal to the maximum amount of water that the mattress can displace in the water before it begins sinking.
We know the density of water is 1000 kg / m²
We can calculate the weight of the maximum amount of water that mattress will displace
[tex]V\times density of water\times g=0.1\times 1000\times 9.81=981N[/tex]
Let M represent the mass that the mattress is supporting.
The total weight of the mattress and the supported mass is:
[tex](2.8+M)\times9.81[/tex]
Setting this weight equal to the weight of the water displaced gives:
[tex](2.8+M)\times9.81=981[/tex]
[tex]2.8+M=100[/tex]
m = 97.2 kg
Hence Mass the air mattress support before sinking will be M = 97.2 kg
To know more about Buoyancy follow
https://brainly.com/question/117714
A garden hose shoots water horizontally from the top of a tall building toward the wall of a second building 20 meters away. If the speed with which the water leaves the hose is 5 m/sec, how long does it take the water to reach the second building, and what distance does the water fall in this time?
Answer:
Explanation:
If air resistance is ignored, the water travels for a time of
t = d/v = 20 m / 5 m/s = 4 s
falling from vertical rest, the water strikes the wall a distance below the hose
d = ½gt² = ½(10)4² = 80 m
Yeah, I think ignoring air resistance is wishful thinking considering the time and distances involved.
True or False. Father of a multitude" obeyed God's command to kill His son because the Ten Commandments had not yet been given.
Answer:
Explanation:
He agreed to the command, because it was God who proposed it. The story is supposed to make a comment on faith. Abraham had faith that somehow God would make everything right. The Ten commandments came later, but really had nothing to do with Abraham's decision.
True.
A common type of succession that occurs on a surface where an ecosystem has previously existed
Which degree would a person most likely pursue if they are interested in how
computers work to solve problems?
A. Business management
B. Mechanical engineering
C. Computer science
D. Education technology
SUBMIT
Answer:
Computer science
Explanation:
You would get everything you need to know about computers if you took computer science. I hope this helps
Answer:
Computer science
Explanation:
Two forces act on a block as shown in the picture. What is the net force of the block?
30 N to the right
30 N to the left
10 N to the left 10
10 N to the right
Answer:
10 N to the left.
Explanation:
Since the forces are acting in opposite directions, you need to calculate the difference.
20 N - 10 N = 10 N
More force is being exerted to the left. Therefore, the net force is 10 N to the left.
Where is a divergent boundary most likely to be found?
Answer:
mid-ocean oceanic ridges
Explanation:
Answer:
mid-ocean oceanic ridges
Explanation:
Divergent boundaries are most likely to be found at mid-oceean oceanic ridges.
4. Trilobites are animals that lived during the Paleozoic era. They populated all parts of the
ocean showed consistent evolution over time and left behind fossils that are large
enough to be studied without a microscope. All of these characteristics make trilobites
the ideal
a. Trace fossil
b. Keystone species
c. Index fossil
d. Reference point
dnreserve the remains of dead
Answer:
c. index fossil
Explanation:
Trilobite fossils are found worldwide, with many thousands of known species. Because they evolved rapidly, and molted like other arthropods, trilobites serve as excellent index fossils. (Arthropods periodically shed their old exoskeletons, or molt.) An index fossil is one that is useful for dating and correlating the strata in which it is found.
A 2N and an 6N force pull on an object to the right and a 4N force pulls on the object to the left. If the object has a mass of 0.25 kg what is its acceleration?
Answer:
[tex]16m/s^{2}[/tex]
Explanation:
Please ask if you have more questions!
Which of the following is NOT a function of the lens in the eye?
W
It can perform minor adjustments for distance.
It flattens when light rays from distant objects are to be focused.
It is a light receptor that generates nerve signals that are sent to the brain
It maintains its spherical shape to view nearby objects.
Answer:
the last one
Explanation:
A thin stream of water flows smoothly from a faucet and falls straight down. At one point, the water is flowing at a speed of 1=1.31 m/s . At a lower point, the diameter of the stream has decreased by a factor of 0.805 . What is the vertical distance ℎ between these two points?
Answer:
Explanation:
as the mass cannot change, the volume per unit time is also constant so the area of the stream times the velocity is constant
If the diameter is 1 where velocity is 1.31 m/s
area is proportional to the square of the diameter A = (π/4)d²
1²(1.31) = 0.805²(v)
v = 1.31/0.805² = 2.02 m/s
v² = u² + 2as
2.02² = 1.31² + 2(9.81)h
h = 0.120819... m
h = 12.0 cm
What are the symmetry operations of molecule AB4, where the molecule b lies at the center of the square and A lies at the center of the square and is not coplaner with B atoms. How to find the multiplication table
The symmetry operations of molecule AB₄ is tetrahedral and they are :
E : Identity4C₃ : axis of rotation 3C₂ : axis of rotation3S₄ : Rotation-reflection axis 6бdTo find the multiplication table we have to apply the multiplication table for Td symmetry ( attached below )
Given that molecule B lies at the corners of the square and molecule A lie at the center and is not coplanar with molecule B the symmetry operations of the molecules AB₄ will belong to a tetrahedral symmetry group which contains :
E : Identity4C₃ : axis of rotation 3C₂ : axis of rotation3S₄ : Rotation-reflection axis 6бdLearn more about tetrahedral symmetry group : https://brainly.com/question/1968705
9. If the force acting on a mass of 4kg accelerates it at a rate of 2m/s2, what will be the acceleration of the body when the force is doubled?
Explanation:
Force= mass× acceleration
Force= 4×2
= 8N
Doubling the force, 8×2= 16N
16= 4 × a
a= 16/4
= 4m/s²
Find the magnitude of the potential difference between two points located 1.2 m apart in a uniform 700 N/C electric field, if a line between the points is parallel to the field. Express your answer in volts.
The magnitude of the potential difference between the two points is 840 V
To solve the problem above, we need to use the formula of Potential difference as related to distance and electric field.
Potential difference: This can be defined as the work required to move a unit charge from a point to another in an electric field.
⇒ Formula:
V = E×d.................. Equation 1⇒ Where:
V = Potential differenceE = Electric Fieldd = DistanceFrom the question,
⇒ Given:
E = 700 N/Cd = 1.2 m⇒ Substitute these values into equation 1
V = 700(1.2)V = 840 VHence, The magnitude of the potential difference between the two points is 840 V
Learn more about Electric Field here: https://brainly.com/question/11509296
while spinning in a centrifuge a 70.0 kg astronaut experiences an acceleration of 5.00 g, or five times the acceleration due to gravity on the earth. what is the centripetal force acting on her
Answer:
Explanation:
70.0(5.00)(9.81) = 3,433.5 = 3430 N
To solve this we must be knowing each and every concept related to centripetal force and its calculations. Therefore, the centripetal force acting on her is 3430 N.
What is centripetal force?The term centripetal relates to a propensity to gravitate toward the center. Centripetal refers to moving in the direction of the center. The force that maintains an item moving in a circular direction and helps it stay on the path is referred to as centripetal force.
Furthermore, centrifugal force is indeed the tendency of things to deviate from a circular route and fly in a straight line. People frequently confuse centripetal force with centrifugal force.
Mathematically,
F = m a
= 70 acceleration
= 70 × 5 × 9.81
= 3430 N
Therefore, the centripetal force acting on her is 3430 N.
To know more about centripetal force, here:
https://brainly.com/question/14249440
#SPJ5
n earthquake emits both P-waves and S-waves that travel at different speeds through the Earth. A P-wave travels at 9 000 m/s and an S-wave at 4 000 m/s. If P-waves are received at a seismic station 34.0 s before an S-wave arrives, how far is the station from the earthquake center
Answer:
Yes , i also need answer
Explanation:
n earthquake emits both P-waves and S-waves that travel at different speeds through the Earth. A P-wave travels at 9 000 m/s and an S-wave at 4 000 m/s. If P-waves are received at a seismic station 34.0 s before an S-wave arrives, how far is the station from the earthquake center
imagine that you have an electric car and all of the recaptured energy is put back into the battery that powers your car what speed could your car cheat from rest by using only the recaptured energy from part B
Answer:
Moving vehicles have a lot of kinetic energy, and when brakes are applied to slow a vehicle, all of that kinetic energy has to go somewhere.
Explanation:
You have a pendulum clock made from a uniform rod of mass M and length L pivoting around one end of the rod. Its frequency is 1 radian/sec. The pivot breaks. Though the mass change is negligible, you need to rehang the rod halfway between the old pivot point and the middle of the rod. The new oscillation frequency is:
A. 0.88 rad/sec
B. 1.13 rad/sec
C. 1.07 rad/sec
D. 0.92 rad/sec
The new oscillation frequency of the pendulum clock is 1.14 rad/s.
The given parameters;
Mass of the pendulum, = M Length of the pendulum, = LInitial angular speed, [tex]\omega _i[/tex] = 1 rad/sThe moment of inertia of the rod about the end is given as;
[tex]I_i = \frac{1}{3} ML^2[/tex]
The moment of inertia of the rod between the middle and the end is calculated as;
[tex]I_f = \int\limits^L_{L/2} {r^2\frac{M}{L} } \, dr = \frac{M}{3L} [r^3]^L_{L/2} = \frac{M}{3L} [L^3 - \frac{L^3}{8} ] = \frac{M}{3L} [\frac{7L^3}{8} ]= \frac{7ML^2}{24}[/tex]
Apply the principle of conservation of angular momentum as shown below;
[tex]I _i \omega _i = I _f \omega _f\\\\\frac{ML^2}{3} (1 \ rad/s)= \frac{7ML^2}{24} \times \omega _f\\\\\frac{24 \times ML^2}{3 \times 7 ML^2} (1 \ rad/s)= \omega _f\\\\1.14 \ rad/s = \omega _f[/tex]
Thus, the new oscillation frequency of the pendulum clock is 1.14 rad/s.
Learn more about moment of inertia of uniform rod here: https://brainly.com/question/15648129