What is the melting point of ice of common salt

The biomolecule with this ratio is water (H2O).

What is biomolecule?
A loose term for molecules found in organisms and necessary for one or more typical biological processes, including such cell division, morphogenesis, as well as development, is "biomolecule" or "biological molecule." Large macromolecules (as well as polyelectrolytes) like proteins, carbohydrates, lipids, as well as nucleic acids, in addition to small molecules like primary metabolites, secondary metabolites, and natural products, are all examples of what is referred to as a biomolecule. Biological materials is a more inclusive term for this category of materials. Living organisms depend on exogenous biomolecules, such as certain nutrients, to survive even though endogenous biomolecules, which are produced inside the organism, are frequently necessary.

Water is made up of two hydrogen atoms bonded to one oxygen atom. This bond forms a covalent bond, with the oxygen atom sharing its two outer electrons with the two hydrogen atoms. This results in a ratio of 1 carbon atom to 2 hydrogen atoms to 1 oxygen atom.

To learn more about biomolecule
https://brainly.com/question/11456886
#SPJ4

The VSEPR theory predicts the form of the molecule based on the bonding electron pairs and lone electron pairs around the core atom since molecular shape is dependent on the electrons surrounding the central atom.

Valence shell electron pair repulsion is the name given to the underlying concept in molecular structures (VSEPR). In essence, it states that because electron pairs are made up of negatively charged particles, they are attracted to one another and want to keep as far apart as possible.

Based on the number of valence shell electron bond pairs between the atoms in a molecule or ion, the valence shell electron pair repulsion (VSEPR) hypothesis is a model used to predict 3-D molecular shape.

Learn more about VSEPR theory refer

https://brainly.com/question/14225705

#SPJ4

a. The names for the compounds in the task above are given below:

b. The correct formulas for the compounds in the problem above are:

The formula of a compound is the chemical representation of chemical substance. The symbols of the individual elements which forms the compound is used in analysing the chemical formula of particular compund.

From the task given above, HNO3 is a compound which is formed by hydrogen, nitrogen and oxygen and their symbols are used to form the formula.

In conclusion, it can be deduced from the explanation given above that the formulae of chemical species is used to represent chemical equation.

Read more on formulas:

https://brainly.com/question/1603500

#SPJ1

The option d) is correct i.e. 1,2 - dimethyl cyclohexane which can exist as cis-trans isomers.

What are isomers?

Isomers are molecules that have the same chemical formula but different structures. This means that they contain the same number of atoms of each element, but they are arranged differently. Isomers can be divided into two categories: structural isomers, where the atoms are connected in different ways, and stereoisomers, where the atoms are connected the same way but arranged differently in space. An example of structural isomers is the difference between butane and isobutane, which are both made up of 4 carbons and 10 hydrogen atoms, but have different structures. An example of stereoisomers is the difference between D-glucose and L-glucose, which are both C6H12O6, but their atoms are arranged differently in space.

The compounds which same molecular formula and different connections are constitutional isomers.

For more information about isomers please visit:
https://brainly.com/question/14130214
#SPJ4

215 ml is needed for a reaction that requires 4.50 mol of h

What is molarity?

The method of figuring out how much of a material a certain chemical solution contains is known as molecularity, sometimes known as the molar concentration of a solution. It is measured by taking into account two indications, namely the volume of the solution and the quantity of solute molecules. Essentially, the volume of the solution is determined in liters. The letter "M" stands for molarity.

According to the given information:

Make use of the equation molarity = amount of moles / number of litres.

Rearrange the equations to read: no. of moles = no. of litres x molarity and no. of litres = no. of moles / molarity.

There are (0.215 x 1) = 0.215 moles of HCl in 215 ml of 1 M HCl (aq).

The volume of 12 M HCl (aq) containing 0.215 mol of HCl is equal to (0.215/12) = 0.0179 litre or 17.9 ml.

As a result, you would use 17.9 ml of 12 M HCl, which you would then dilute with water to get a total volume of 215 ml

To know more about molarity:

https://brainly.com/question/8732513

#SPJ4

The osmotic pressure of a solution that contains 0.026g of a hydrocarbon solute is 4.0 torr.

What is osmotic pressure?

Osmotic pressure is the pressure exerted by a solution due to the concentration of dissolved particles and the presence of a semipermeable membrane, which prevents the passage of some particles. This pressure can be present in both living and non-living systems. In living systems, osmotic pressure is the force that is responsible for the movement of water and other solutes across cell membranes. In non-living systems, osmotic pressure occurs when two solutions of different concentrations are separated by a semipermeable membrane. The higher the concentration of dissolved particles, the greater the osmotic pressure. Osmotic pressure plays an important role in the absorption and movement of water and other substances throughout the body. It is also important in industries such as food processing, pharmaceuticals, and biotechnology.

moles of solute=mass/molar mass =0.026/340g/mol=7.647×10⁻⁵

Molarity=moles/volume in solution

=7.647ₓ10⁻⁵/0.350L=0.000218M

osmotic pressure(Pi)=MRT

Pi=0.000218ₓ0.0821ₓ293

=0.00525atm

now,1 atm= 760 torr

so, 0.00525 atm= (760ₓ0.00525)

=3.99 torr

=4.00 torr

For more information about osmotic pressure please visit:
https://brainly.com/question/25904085
#SPJ4

An object has reflection symmetry (line or mirror symmetry) if a line runs through it, dividing it into two mirror images of each other.

Reflection symmetry is a type of symmetry that pertains to reflections. Line symmetry and mirror symmetry are other terms for reflection symmetry. It states that if there is at least one line that divides a figure into two halves, with one half mirroring the other.

A biradial animal has only two planes of symmetry, one passing through the anteroposterior and sagittal axes and the other through the anteroposterior and transverse axes.

Thus, An object has reflection symmetry if a line runs through it, dividing it into two mirror images of each other.

To learn more about reflection symmetry, follow the link;

https://brainly.com/question/1531736

#SPJ1

The temperature of liquid in a cup with a lid changes less than in a cup without a lid.

It is well known that in a closed system, neither heat nor matter will be transferred from the system to the environment. In contrast, in an open system, energy and heat are exchanged from the system to its surroundings and vice versa.

Cup with the lid (cup A) is a closed system in this situation, but Cup without lid (cup B) is an open system. Therefore, there won't be any heat or material transfer from cup A to the system or surroundings. As a result, cup B warm up slowly.

We can conclude that cup with lids are able to keep liquid cool better than the cup without the lids. Therefore, after 10 minutes the liquid in the cup without lid will be more warmed up.

Know more about how lid affects the liquid in a cup at:

https://brainly.com/question/12702491

#SPJ1

Heat of combustion used to explain the relative stability of the compounds.

The heat of combustion definition is the variation in energy released in the form of heat through the burning of an amount of any substance, all reactants being in the standard state (temperature of 25 C and pressure of 1 atm).

When the amount is quantified for 1 mole of said substance, one can define this quantity as the molar heat of combustion.

The molar heat of combustion values are defined in kilojoules per mole (KJ/mol). The kilojoule is a unit of energy and corresponds to 1000 or Joules (J). Mole is a unit of measurement used to express the amount of matter.

Now sugar is a non electrolyte so comparatively more stable hence more energy required to decompose the sugar hence its heat of combustion value is -5639kJ/mol high.

Where as TNT used as an explosive so it is susceptible for reaction and combustion, hence low amount of heat of combustionnis required for TNT that is -3406kJ/mol whuch is comparatively lower.

To know more about heat of combustion here

https://brainly.com/question/11103047

#SPJ4

Mitochondria is   responsible for the synthesis of ATP which is required for photosynthesis.

It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy  through the process of cellular respiration.

Some of the energy which is converted  is stored in molecules of carbohydrates like sugar and starches  which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis  are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.

Learn more about photosynthesis,here:

https://brainly.com/question/29776072

#SPJ1

Your question is incomplete, but most probably your full question was:Which structure is responsible for the synthesis of ATP?

A.cell membrane

B.nucleus

C.lysosomes

D.mitochondria

E.vacuole

The majority of the energy released in citric acid cycle reactions is conserved in the form of adenosine triphosphate (ATP).

What is citric acid cycle?
The Krebs cycle, also referred to as the TCA cycle or the citric acid cycle (CAC), is a set of chemical reactions that releases stored energy by oxidising acetyl-CoA, which is inferred from carbohydrates, fats, as well as proteins. Organisms a certain respire (as compared to organisms a certain ferment) use the Krebs cycle to produce energy, either through anaerobic or aerobic respiration. The cycle additionally supplies the reducing agent NADH and precursors of a few amino acids that are needed in a variety of other reactions. It may have originated abiogenically and became one of the earliest elements of metabolism given its central role in many biochemical pathways.

To learn more about citric acid cycle
https://brainly.com/question/29708858
#SPJ4

The emitted particle is called photon which is responsible for the different color emission.

When an electron jumps from the higher energy orbit to a lower energy orbit, it releases energy in the form of photons (according to the particle theory of light), this is called photon emission.

The released photons will have different wavelengths and frequencies due to which photons will have different energies and color.

Like in chemical compounds, Heated compounds have acquired energy in the form of thermal energy. This thermal energy, if it is enough, excites electrons in any major atom in a compound or any singular lone atom so that the compound reaches one of its accessible excited states. This event is called an electronic excitation, and it leaves the compound less stable than in its ground state.

To know more about thermal energy here

https://brainly.com/question/9621699

#SPJ4

Answer:

position

Explanation:

cant know both at the same time

The same amount of matter can represent distinct states of matter by having different amounts of energy. An ice cube comprised of water, for instance, changes into liquid water when you add energy, and when you add even more energy, it turns into steam.

In order to accomplish work and to produce heat and light, energy must be transferred to a body or to a physical system. Energy is the quantitative attribute that does this. It is a mechanically accepted quantity.

The observable cosmos is made up of matter, which coupled with energy serves as the foundation for all objective occurrences. In physics, energy is the ability to perform work. It could exist in several forms, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc.

Thus, The same amount of matter can represent distinct states of matter by having different amounts of energy.

To learn more about the energy, follow the link;

https://brainly.com/question/1932868

#SPJ1

Answer:

3MgI2 + Fe2S3 -> 3MgS + 2FeI3

Reaction Type

1.Double Displacement 

2.Oxidation-Reduction

The mixtures would result in the pk, of the acid being obtained from a direct pH measurement of the resulting solution is  25 cm³ 0.1 mol dm⁻³HCl and 25 cm³ 0.1 mol dm⁻³ NaCl. Therefore, option A is correct.

The pH scale, which previously stood for "potential of hydrogen," is used to describe how acidic or basic an aqueous solution is. The pH values of acidic solutions are lower than those of basic or alkaline solutions.

The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.

A solution's pH is a significant indicator of its chemical composition. The pH can affect how readily available nutrients are, how biological processes work, how bacteria behave, and how chemicals behave.

Thus, option A is correct.

To learn more about pH, follow the link;

https://brainly.com/question/15289741

#SPJ1

The structural formulas for the products of 1,2 and 1,4 addition of hydrogen chloride to 2,4−hexadiene is verified.

Define structural formula.

Chemical formulas known as structural formulas can provide a more thorough understanding of a substance than molecular formulas.

Explanation:

For the given reaction,

The first double bond receives an addition of H-Cl in the 1,2-addition reaction; the second double bond is not involved in the reaction.

However, in the 1,4-addition reaction, the first step is the same, but the second step is different because the location of the second double bond changes and Cl- is added to the fourth carbon because the second double bond demonstrates the need to stabilize the carbocation.

The reactions are represented in the following image.

To learn more about structural formula from the given link.

https://brainly.com/question/514499

#SPJ4

When, where, and how much genes are expressed in each cell are all regulated by the histone proteins and epigenetic elements.

Histone proteins:

The eukaryotic cells include histone proteins, which serve two purposes. They support preserving DNA in a compact state and control how flexible and tight DNA strands are, which controls how genes are expressed.

Epigenetic factors:

The substances known as epigenetic regulators alter the gene to control how the gene expresses itself. These modifications neither result in mutations nor are they heritable. These are the transient alterations, such as DNA remodeling, methylation, and alkylation.

To learn more about Epigenetic factors click the link

https://brainly.com/question/28544015

#SPJ4

Answer:

Explanation:

It is generally true that when the potential energy of the products of a reaction is higher than the potential energy of the reactants, the reaction is less stable and less likely to occur spontaneously. This is because potential energy is a measure of the stored energy of a system, and when the potential energy of the products is higher than the reactants, it means that more energy is being stored in the products than in the reactants. This excess of energy makes the products less stable and more reactive, as they are seeking to release the excess energy and return to a more stable state.

On the other hand, when the potential energy of the reactants is higher than the potential energy of the products, the reaction is more stable and more likely to occur spontaneously. This is because the reactants have more potential energy, meaning that they are more reactive and seeking to release that energy in order to return to a more stable state. The products, on the other hand, have lower potential energy and are more stable, so the reaction is more likely to occur as the reactants seek to release their excess energy and reach a lower energy state.

Overall, the stability of a reaction depends on the relative potential energies of the reactants and products, with reactions being more stable when the potential energy of the reactants is higher than the potential energy of the products.

The energy contained within covalent bonds in molecules is a type of potential energy called chemical energy.

What is a chemical?

To know more about chemical, click the link given below:

https://brainly.com/question/29240183

#SPJ4

The ammonia molecules involved in your process. 2.39 g of ammonia will be produced by you.

given that :

No. of ammonia there: 8.41 × 10²⁴

molar mass of ammonia : 17 g /mol

no. of molecules = (mass / molar mass ) × Avogadro's number

8.41 × 10²⁴ = (mass / 17 ) × 6.022 × 10²³

mass = 17 / 7.1

mass = 2.39 g

Consequently, a reaction that will produce ammonia as a byproduct. You project that your process should produce 8.41 × 10²⁴ ammonia molecules. 2.39 grams of ammonia can be produced.

What does the chemical term "molecular" mean?

The most frequent uses of the term "molecular" are in biology and chemistry, and it invariably refers to the tiniest components of living things or substances. The name molecule, which meaning "very minute particle," is derived from the Latin word molecula, which means "small bulk."

To know more about molecules visit:

https://brainly.com/question/1446104

#SPJ4

Here we add lone paris,to the structure of caffeine.

Caffeine is a type of drug. It is used as a cognitive inhancer.

We've been looking at then following structure. We definitely would like to look at it is the  geometries of some of the centers. We'll look to it  geometry here. Yes, yeah. Down here as well. We have a bonding angle of less than 107.5 because we have a trig onal planer with a bonding angle of 120. This is the  site has a geometry with all the  bounding angles of 109.5. it is the  funding angles of less than 107.5 carbon site here and less than 120 carbon site of  here are the tribunal to the  parameters. My substitute if luck with the has the same geometry with bonding angles as before.

To know more about caffeine click-

https://brainly.com/question/17357865

#SPJ1

Answer:

Here is a sample sale pitch poster about solar energy:

"Go Solar with Confidence!

Are you tired of rising energy costs and looking for a more sustainable solution? Solar energy is the answer!

Pros:

Solar energy is a clean and renewable source of electricity. It doesn't produce any harmful greenhouse gases or pollutants, making it a great choice for the environment.

Solar panels are easy to install and maintain, with a lifespan of 25-30 years.

Solar energy can save you money on your energy bills, especially if you live in a sunny location.

Cons:

The initial cost of installing solar panels can be high, although there are various financing options available to help offset this expense.

Solar energy is not always reliable, as it depends on the availability of sunlight. However, advances in solar panel technology have made it possible to generate electricity even on cloudy days.

Why is it great?

Solar energy is a reliable and cost-effective way to generate electricity for your home or business. It can help you reduce your carbon footprint and protect the environment for future generations.

Why is it bad?

The upfront cost of installing solar panels can be a barrier for some people. However, the long-term financial benefits of switching to solar energy can far outweigh this initial investment.

Can you overcome those downfalls?

Yes, by exploring financing options and taking advantage of government incentives and rebates, you can make the switch to solar energy more affordable.

Be to the point:

Solar energy is a clean, renewable, and cost-effective way to generate electricity. It has a long lifespan and can save you money on your energy bills. Don't wait any longer - make the switch to solar today!"

The first radioiodine isotopes to be used to treat thyrotoxicosis were iodine-130 and iodine-131 in 1941, and thyroid cancer was added to their list of uses in 1943.

To Learn more About radioiodine refer to:

https://brainly.com/question/20739702

#SPJ1

Answer:

Hope this helps

Explanation:

hjnm

1) The noble gas is element 4.

2) The element that has the largest atomic radius is element 4.

3) The element that would form a +2 cation is element 3.

We define the ionization energy as the energy that we need so as to remove an electron from an atom. If the electron that we are referring to here is the first electron that is removed from the atom then we can call it more specificaly the first ionization energy. There are other ionization energies as more electrons are removed from the atom.

I see that it is important to say a couple of things about the noble gases that would help us decide on the answer. We know that the noble gas has to do with an element that is found in the eighteenth group of the periodic table and does has a complete octet.

This stability means that it is quite difficult to remove electrons from this atom hence the atom is quite stable.

Learn more about ionization energy:https://brainly.com/question/28385102

#SPJ1

The percentage of P in Ca(H2PO4)2 is 26.42%.

Relative molecular mass of Ca(H2PO4)2  

=40.07+(1×4)+(30.9×2)+(16×8)

=40.07+4+61.8+128

=233.87

Therefore, 233.87g Ca(H2PO4)2 contains 61.8g P.

So, 100g Ca(H2PO4)2 contains:

= 100×61.8/233.87 ​

=26.42

Therefore, the percentage of P in Ca(H2PO4)2 is 26.42%.

To know more about the Percentage of an element, please refer to the link below:

brainly.com/question/24166955

The number of mols of N2 present 0.3 atm pressure and 30 °C is 0.0781 mol

What are mole?

The term "mole" (also spelled "mole") refers to a standard scientific unit for measuring large quantities of extremely small objects like atoms, molecules, or other specific particles. The mole represents 6.02214076 10^23 units, an astronomically large number.

At STP, which is denoted as 0°C (273.15 K, 32°F), the molar volume of a gas is 22.414 L/mol. By calculating the moles of nitrogen in 1.75 L at STP using dimensional analysis we get

1.75 L N2 divided by 1 mole per 22.414 L equals 0.0781 mol.

Learn more about moles here:

brainly.com/question/26416088

#SPJ4

Answer:

1.75

Explanation:

if you add