what is the maturity value of a 7-year term deposit of $6939.29
at 2.3% compounded quarterly? How much interest did the deposit
earn?
the maturity value of the teem deposit is? $____________
The amoun

Answer:

19

Step-by-step explanation:

Because 20-1=19

The solution to the differential equation is y(t) = 0, for t < 3

[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)})[/tex], for t ≥ 3

Solve the differential equation using Laplace transform.

Taking the Laplace transform of both sides of the equation

[tex]s^2 Y(s) + 36 Y(s) = e^{-3s}[/tex]

[tex]Y(s) = e^{-3s} / (s^2 + 36)[/tex]

Partial fraction decomposition of Y(s)

[tex]Y(s) = e^{-3s} / (s^2 + 36) = (1/6) * (1/(s+6)) - (1/6) * (1/(s-6)) * e^{-3s}[/tex]

Take the inverse Laplace transform

[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)}) * u(t-3)[/tex]

where u(t) is the unit step function.

For t < 3, the unit step function is 0

y(t) = 0.

For t ≥ 3, the unit step function is 1

[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)})[/tex]

Therefore, the solution to the differential equation is

y(t) = 0, for t < 3

[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)}),[/tex] for t ≥ 3

Learn more on differential equation on https://brainly.com/question/28099315

#SPJ4

The surface casing setting depth for the given data is 4206.15 ft.

Given data: Intermediate setting depth = 11,000 ft

Original mud weight = 10.5 Ilgal

Kick size = 0.5 lb/gal

We are to select a surface casing setting depth for the given data. We can find the surface casing setting depth by using Eaton's chart.

The formula used is as follows:

Surface casing setting depth = Kick tolerance pressure ÷ (Mud weight ÷ fracture gradient)

Kick tolerance pressure can be determined by the formula:

Kick tolerance pressure = (kick size) x (hole capacity) × (0.052) × (depth)

First, we calculate the kick tolerance pressure.

Given: Kick size = 0.5 lb/gal

Hole capacity = 0.1667 gal/ft

Depth = 11,000 ft

Substituting the given values in the formula to get:

Kick tolerance pressure = 0.5 × 0.1667 × 0.052 × 11000

Kick tolerance pressure = 48.42 psi

Now, we calculate the fracture gradient.

Using Eaton's chart, the fracture gradient is found to be 0.9 psi/ft.

We now substitute the values in the formula for surface casing setting depth.

Surface casing setting depth = Kick tolerance pressure ÷ (Mud weight ÷ fracture gradient)

Surface casing setting depth = 48.42 ÷ (10.5 ÷ 0.9)

Surface casing setting depth = 4206.15 ft

Therefore, the surface casing setting depth for the given data is 4206.15 ft.

To know more about pressure, visit:

https://brainly.com/question/29341536

#SPJ11

Designing the water network system using the dead point method, determining the elevation of the water tank, and calculating the dynamic pressures at various points.

The main and primary pipes of the water network system can be designed using the dead point method, which involves considering the elevation of the water sources and the desired minimum allowable pressure at various points. By analyzing the given information and applying the William Hazen coefficient (C = 120) and formula (V = 0.85CR^0.43), the appropriate pipe diameters can be selected for the main and primary pipes.

Additionally, the elevation of the water tank can be determined by evaluating the given distances and elevations of the pipes. Finally, by considering the flow rates and pipe characteristics, the dynamic pressures at points A, B, C, D, and E can be calculated.

Step 2: In order to design the main and primary pipes of the water network system, we can utilize the dead point method. This method takes into account the elevation of the water sources and the desired minimum allowable pressure at various points.

By applying the given information and employing the William Hazen coefficient (C = 120) and formula (V = 0.85CR^0.43), we can select suitable pipe diameters for the main and primary pipes. The dead point method ensures that the water flow remains at a minimum acceptable pressure throughout the network.

To determine the elevation of the water tank, we need to consider the given distances and elevations of the pipes. By analyzing the information provided, we can calculate the elevation of the water tank by summing up the elevation changes along the pipe network. This will give us the necessary information to place the water tank at the appropriate height.

Additionally, we can calculate the dynamic pressures at points A, B, C, D, and E by taking into account the flow rates and pipe characteristics. The flow rate can be determined using the maximum daily water demand (maxqday = 300 1/day capita), and by applying the William Hazen formula (V = 0.85CR^0.43), we can calculate the velocity of the water in the pipes.

With the pipe diameters provided (80mm, 100mm, 125mm, 175mm, 200mm, 250mm, 300mm), we can calculate the dynamic pressures at each point using the Hazen-Williams equation.

Learn more about Network

brainly.com/question/29350844

#SPJ11

Keep in mind that the estimated proportion, p, can affect the sample size significantly.

If you can provide an estimated proportion or an assumed value for p, I can calculate the sample size for you.

To determine the required sample size for a given population with a desired level of reliability, we need to consider the margin of error and confidence level.

The margin of error defines the maximum allowable difference between the sample estimate and the true population parameter, while the confidence level indicates the level of certainty we want to have in our results.

Since you mentioned a 95% reliability, we can assume a 95% confidence level, which is a common choice. The standard margin of error associated with a 95% confidence level is approximately ±1.96 (assuming a normal distribution).

However, it's important to note that the margin of error can be adjusted based on the specific characteristics of the population being studied.

To calculate the required sample size, we also need to know the estimated proportion of the population exhibiting the trend or characteristic of interest.

Without this information, we can't provide an exact sample size. However, I can show you a general formula for calculating the sample size based on an estimated proportion.

The formula to determine the sample size is:

n = (Z^2 * p * (1 - p)) / E^2

Where:
n = required sample size
Z = Z-score corresponding to the desired confidence level (95% is approximately 1.96)
p = estimated proportion of the population exhibiting the trend or characteristic
E = margin of error

To know more about equation click-
http://brainly.com/question/2972832
#SPJ11

The total energy per unit weight of the water at the specified point is determined by adding the kinetic energy per unit weight and the potential energy per unit weight of the fluid. According to the principle of conservation of energy, the total energy per unit weight of the fluid in a flow system is constant and is known as Bernoulli's equation.

The following formula can be used to determine the total energy per unit weight of the water at the specified point: T.E./w = P/w + V^2/2g + Z. Where, T.E./w = Total energy per unit weightP/w = Pressure energy per unit weightV = Velocity of the water, g = Acceleration due to gravity Z = Potential energy per unit weight of the water in the pipeline. Thus, putting all the given values into the equation, we get:T.E./w = 30 × 103/1000 + (10)2/(2 × 9.81) + 600/1000= 30 + 5.092 + 0.6= 35.692 m. Therefore, the total energy per unit weight of water at the given point is 35.692 m. Water flows through pipelines due to the pressure difference between two points, and the velocity of the fluid inside the pipeline is determined by the pressure and other factors, such as the diameter of the pipe, the roughness of the surface of the pipe, and the viscosity of the fluid. Bernoulli's equation is a fundamental principle of fluid mechanics that explains how the energy of a fluid changes as it flows along a pipeline or around a curve. It is the basic principle used to describe the behavior of fluids in motion. Bernoulli's equation can be used to calculate the total energy per unit weight of a fluid at a given point in the pipeline by adding the kinetic energy per unit weight and the potential energy per unit weight of the fluid. In this problem, water is flowing through a pipeline 600 cm above datum level, with a velocity of 10 m/s and a gauge pressure of 30 KN/m2, and the mass density of water is 1000 kg/m3. We have to calculate the total energy per unit weight of water at this point. Using Bernoulli's equation, we can obtain the following expression: T.E./w = P/w + V^2/2g + Z, Where, T.E./w = Total energy per unit weight P/w = Pressure energy per unit weight, V = Velocity of the water, g = Acceleration due to gravity, Z = Potential energy per unit weight of the water in the pipe line. Putting the given values into the equation, we get: T.E./w = 30 × 103/1000 + (10)2/(2 × 9.81) + 600/1000= 30 + 5.092 + 0.6= 35.692 m, Thus, the total energy per unit weight of water at the given point is 35.692 m.

In conclusion, the total energy per unit weight of water at a point 600 cm above datum level in a pipeline with a velocity of 10 m/s and a gauge pressure of 30 KN/m2, with a mass density of 1000 kg/m3, is 35.692 m.

Learn more about Bernoulli's equation visit:

brainly.com/question/29865910

#SPJ11

(i) Material considered for Design - PP (Polypropylene)

(ii) Valve such as Gate & Globe can be used.

(iii) the total frictional loss - 57.255 m.

(iv) Total Power Consumption - 3370.02 W.

(i) Material of Pipe used - 304 &  316L Grade of STAINLESS STEEL, Haste alloy B & C & PP ( Polyproypene ) can be used for the piping material of acetic acid.

From cost point of view Haste alloy is quite expensive material, so we can go for SS 304 , SS 316 L or PP (Polypropylene)

But as the operating temperature and pressure is very less PP (Polypropylene) would be best material from design and from cost point of view,.

So Final Material considered for Design - PP (Polypropylene)

(ii) Type & Number of Valve & Fittings -

A pump with suitable head will be needed to pump the acetic acid to desired location.

Number of Bend - 2 nos of 90 Degree Bends (On Assumption )

Fittings - Flange fittings

Valves - 2 nos Butterfly valve ( One At Inlet & and other at Outlet of Pump)

1 nos NRV (Non-Return Valve) or Check Valve at discharge side to prevent backflow of acetic acid.

1 nos Butterfly valve for isolation purpose at the end discharge point

Other type of Valve such as Gate & Globe can also be used but I have considered Butterfly valve.

(iii) Friction Loss Calculation -

1) Volumetric Flowrate (Q) - 4 X 10⁻³ m3/sec

2) Size of Pipe - 2 in Secduled 40 -

ID - 2.067 inch (52.5018 mm)

OD - 2.375 inch (60.325 mm)

3) A (Area of Pipe) - pi/4 * ID² - 2.164 x 10⁻³ sqm

4) Velocity in Pipe - Q/A - 1.84 m/s

5) Reynolds Number -(D*V*Rho)/viscosity - 87032 (turbulent flow)

So now we will calculation friction factor for Turbulent flow with smooth

pipes

We will use Blasius equation

f - 0.316/Re

f - 0.01839 ............................ (1)

Now Let's calculate friction coefficient for minor losses

Friction loss due to 90 Degree bend - 0.45

Total Friction Losses - Major Loss + Minor Loss

- 4fLv² /2gD + hv²/2g

- 11.967 + 0.288

Total Friction Losses - 12.255 m .................. (1)

Static Head Required - 45 m ................ (2)

We are using Darcy Weisbach equation for calculation friction loss

where,

f - friction factor

v - velocity in pipe (m/s)

D - ID (Inside diameter of Pipe)

g - 9.81 m/s² acceleration due to gravity

h - Sum of Friction factor due to bends and other minor losses

From (1) & (2)

Total Head Required - Static Head + Dynamic Head

- 45 + 12.255

- 57.255 m

(iv) Total Power consumption by Pumps - Rho * g * Q * H / Efficiency

Efficiency not given ( So Assuming 70 % )

Rho (density of acetic Acid ) - 1050 kg /m³

Total Power Consumption - 3370.02 W or 3.370 kW

Learn more about frictional loss here:

https://brainly.com/question/31370419

#SPJ4

To find the selling price of the car, we need to add the present value of the end-of-month payments and the down payment. Using the formula for the present value of an annuity, we get $39851.23 (option C) as the selling price.

To find the selling price of the car, we need to use the formula for the present value of an annuity. An annuity is a series of equal payments made at regular intervals. In this case, the annuity is the end-of-month payments of $588 for 5.5 years. The formula for the present value of an annuity is:

[tex]PV = PMT \cdot \left[\frac{{1 - \frac{1}{{(1 + i)^n}}}}{i}\right][/tex]

where PV is the present value, PMT is the payment amount, i is the interest rate per period, and n is the number of periods.

In this case, we have:

PV = ?

PMT = 588

i = 0.0313 / 12 (since the interest rate is compounded annually and the payments are made monthly)

n = 5.5 * 12 (since there are 12 months in a year and the payments are made for 5.5 years)

Substituting these values into the formula, we get:

[tex]PV = 588 \cdot \left[\frac{{1 - \frac{1}{{(1 + \frac{{0.0313}}{{12}})^{(5.5 \cdot 12)}}}}}{{\frac{{0.0313}}{{12}}}}\right][/tex]

PV = 35651.23

This means that the present value of the end-of-month payments is $35651.23. However, this is not the selling price of the car yet. We also need to add the down payment of $4200 that Derek paid at the beginning. So, the selling price of the car is:

Selling price = PV + down payment

Selling price = 35651.23 + 4200

Selling price = 39851.23

Therefore, the selling price of the car is $39851.23. The correct answer is c) $39851.23.

Learn more about present value at:

https://brainly.com/question/30390056

#SPJ11

The businessman would pay $10260 including taxes for the machine. So, the correct answer is c. $10260.

The Ontario businessman purchased a machine from Prince Edward Island that cost $9000 before 14% HST. To calculate the total cost including taxes, we need to add the HST to the original price of the machine.
1: Calculate the HST amount
To find the HST amount, we multiply the original price by the HST rate (14% or 0.14).
HST amount = $9000 * 0.14 = $1260

2: Add the HST amount to the original price
To identify the total cost including taxes, we add the HST amount to the original price of the machine.
Total cost including taxes = $9000 + $1260 = $10260

Hence, c is the correct answer.

You can learn more about taxes at: brainly.com/question/12611692

#SPJ11

The average normal stress at the midsection of rod AB is approximately 6.37 kips/in², and the average normal stress at the midsection of rod BC is approximately 22.43 kips/in².

To find the average normal stress at the midsection of rods AB and BC, we can use the formula for average normal stress:

Average normal stress = Force / Area

(a) Average normal stress at the midsection of rod AB:

Force P = 10 kips

Length of rod AB = 30 in.

Radius of rod AB = 1.25 in.

To calculate the average normal stress, we need to find the area of rod AB. The cross-sectional area of a cylindrical rod can be calculated using the formula:

Area = π * radius^2

Area of rod AB = π * (1.25 in)^2

Now, we can calculate the average normal stress:

Average normal stress at the midsection of rod AB = Force / Area

Average normal stress at the midsection of rod AB = 10 kips / (π * (1.25 in)^2)

(b) Average normal stress at the midsection of rod BC:

Force P = 12 kips

Length of rod BC = 25 in.

Radius of rod BC = 0.75 in.

Similar to rod AB, we need to find the area of rod BC:

Area of rod BC = π * (0.75 in)^2

Now, we can calculate the average normal stress:

Average normal stress at the midsection of rod BC = Force / Area

Average normal stress at the midsection of rod BC = 12 kips / (π * (0.75 in)^2)

Now, let's calculate the values:

(a) Average normal stress at the midsection of rod AB:

Average normal stress at the midsection of rod AB ≈ 10 kips / (3.14 * (1.25 in)^2) ≈ 6.37 kips/in²

(b) Average normal stress at the midsection of rod BC:

Average normal stress at the midsection of rod BC ≈ 12 kips / (3.14 * (0.75 in)^2) ≈ 22.43 kips/in²

Learn more about Stress:

https://brainly.com/question/2948847

#SPJ11

The given concentration of the lithium phosphate solution is 40 mg in 250 mL.To find out the concentration of phosphate ions, the molarity of the solution should be determined.

The molar mass of lithium phosphate can be calculated by adding the molar masses of its components Therefore, the molar mass of lithium phosphate By multiplying the concentration of lithium phosphate by its molar mass and dividing it by the volume of the solution, we can get the concentration of phosphate ions in the solution in moles per liter.The molarity is given by the formula: Molarity (M) = moles of solute / Liters of solution.

Therefore, the molarity of lithium phosphate solution can be calculated as follows:mass of lithium phosphate = 40.0 mg = 0.0400 gmolar mass of lithium phosphate = 101.87 g/molno. of moles = (mass of solute) / (molar mass)no. of moles = 0.0400 / 101.87no. of moles = 0.000393 MTherefore, the concentration of phosphate ions is 0.000393 M.From the previous knowledge of molarity, one mole of any monovalent ion, such as phosphate, has one equivalent.

To know more about phosphate visit :

https://brainly.com/question/2426918

#SPJ11

A student dissolves 40.0mg of lithium phosphate in enough water to make 250.0 mL of solution. The concentration of phosphate ions is 0.000393 M.

The given concentration of the lithium phosphate solution is 40 mg in 250 mL.

To find out the concentration of phosphate ions, the molarity of the solution should be determined.

The molar mass of lithium phosphate can be calculated by adding the molar masses of its components Therefore, the molar mass of lithium phosphate

By multiplying the concentration of lithium phosphate by its molar mass and dividing it by the volume of the solution, we can get the concentration of phosphate ions in the solution in moles per liter.

The molarity is given by the formula: Molarity (M) = moles of solute / Liters of solution.

Therefore, the molarity of lithium phosphate solution can be calculated as follows:

mass of lithium phosphate = 40.0 mg

= 0.0400 g

molar mass of lithium phosphate = 101.87 g/mol

no. of moles = (mass of solute) / (molar mass)

no. of moles = 0.0400 / 101.87

no. of moles = 0.000393 M

Therefore, the concentration of phosphate ions is 0.000393 M.

From the previous knowledge of molarity, one mole of any monovalent ion, such as phosphate, has one equivalent.

To know more about phosphate visit :

brainly.com/question/2426918

#SPJ11

The linear equation represented by the table is:

y = -2.4*x + 18

A general linear equation can be written as follows:

y = ax + b

Where a is the slope and b is the y-intercept.

On the graph we can see that when x = 0, the value of y is 18, so that is the y-intercept, and thus, we can write the line as:

y = ax + 18

The next point is (2, 13.2)

Replacing that we can get:

13.2 = 2a + 18

13.2 - 18 = 2a

-4.8 = 2a

-4.8/2 = a

-2.4 = a

So the linear equation is:

y = -2.4*x + 18

Learn more about linear equation at:

https://brainly.com/question/1884491

#SPJ1

The vertical reaction of support A is approximately 12.6 kN.

Step 3: To calculate the vertical reaction at support A, we need to consider the equilibrium of forces. Given that E is 10 kN, G is 5 kN, H is 3 kN, Kas is 8 m, L is 3 m, and Nas is 13 m, we can determine the vertical reaction at support A.

First, let's calculate the moment about support A due to the applied loads:

Moment about A = E * Kas + G * (Kas + L) + H * (Kas + L + Nas)

Substituting the given values:

Moment about A = 10 kN * 8 m + 5 kN * (8 m + 3 m) + 3 kN * (8 m + 3 m + 13 m)

             = 80 kNm + 55 kNm + 96 kNm

             = 231 kNm

Next, let's consider the equilibrium of forces in the vertical direction:

Vertical reaction at A = (E + G + H) - (Moment about A / L)

Substituting the given values:

Vertical reaction at A = (10 kN + 5 kN + 3 kN) - (231 kNm / 3 m)

                     = 18 kN - 77 kN

                     = -59 kN

Since the vertical reaction at support A is typically positive for upward forces, we take the absolute value:

Vertical reaction at A ≈ |-59 kN| ≈ 59 kN

Therefore, the vertical reaction at support A is approximately 59 kN.

Learn more about vertical reaction

https://brainly.com/question/3132810

SPJ11

The continuous flow in a horizontal, frictionless rectangular open channel is subcritical. A smooth step-up bed is built downstream on the channel floor. With further increase in the height of the step-up bed, the water surface over the step-up bed will decrease to the extent that it will be below the critical depth.

A flow that is slower than critical velocity is known as subcritical flow. The Froude number in subcritical flow is less than one. Subcritical flow occurs when water is flowing slowly, and the water surface is higher than the critical depth of flow.

The critical depth of flow is the depth of flow at which the specific energy of flow is minimum. The flow is critical if the velocity of water is equal to the velocity of the wave. In open channels, the critical depth is determined by the specific energy equation.

When a flow is restricted, choked conditions occur. When a flow in a channel reaches the maximum possible velocity, the flow becomes choked. The flow will be choked, and the water surface will rise if the depth of the flow exceeds the critical depth in a horizontal, frictionless rectangular open channel with a smooth step-up bed built downstream. With further increase in the height of the step-up bed, the water surface over the step-up bed will decrease to the extent that it will be below the critical depth.

Know more about the Subcritical flow

https://brainly.com/question/31946270

#SPJ11

This system of equations is inconsistent because there is no solution that satisfies both equations simultaneously. Therefore, there is no value of x and y that satisfies the given conditions.

To find the values of x and y in the sequence 1, 2, x, 5, y, 8, given that the resulting number is 5 and the mean is 4, we can use the concept of the mean.

The mean is calculated by summing all the numbers in a sequence and dividing by the total count. In this case, the mean is given as 4.

The sum of the numbers in the sequence is 1 + 2 + x + 5 + y + 8. We need to find the values of x and y such that the resulting number is 5 when added to the sequence.

Using the mean formula, we can set up the equation:

(1 + 2 + x + 5 + y + 8) / 6 = 4

Simplifying this equation, we have:

(16 + x + y) / 6 = 4

Multiplying both sides of the equation by 6, we get:

16 + x + y = 24

Rearranging the equation, we have:

x + y = 8

Since the resulting number is 5 when added to the sequence, we can write:

1 + 2 + x + 5 + y + 8 = 5

Simplifying this equation, we get:

x + y = -11

Now, we have a system of equations:

x + y = 8

x + y = -11

This system of equations is inconsistent because there is no solution that satisfies both equations simultaneously.

For more such questions on inconsistent visit:

https://brainly.com/question/15654281

#SPJ8

A buffer is a solution that is capable of resisting large changes in pH upon the addition of a small amount of acid or base. It is made up of a weak acid and its conjugate base or a weak base and its conjugate acid.

Buffer systems are important in many biological processes as they help to maintain the pH balance in living systems. If the pH of a system gets too acidic or too basic, In a buffer solution, the weak acid will donate a proton to neutralize the added base while the weak base will accept the proton to neutralize the added acid.

This is because the conjugate base of a weak acid is a weak base and can accept a proton while the conjugate acid of a weak base is a weak acid and can donate a proton. The addition of a strong acid to a buffer solution will result in the formation of the weak acid, while the addition of a strong base will result in the formation of the weak base.In a buffer system, a conjugate acid or conjugate base will neutralize the addition of a strong acid.

To know more about amount visit:

https://brainly.com/question/30145972

#SPJ11

In a buffer system, the conjugate base is the species that will neutralize the addition of a strong acid. The correct answer is Option D.

In a buffer system, the addition of a strong acid can be neutralized by the presence of a conjugate base. A buffer system consists of a weak acid and its conjugate base (or a weak base and its conjugate acid) in approximately equal concentrations. When a strong acid is added to the buffer, it will react with the conjugate base present in the buffer, forming the weak acid and reducing the concentration of the strong acid.

The conjugate base in the buffer acts as a base, accepting a proton from the strong acid and neutralizing it. This reaction helps maintain the pH of the solution relatively constant, as the weak acid in the buffer will resist changes in pH due to the presence of its conjugate base.

For example, in an acetic acid-sodium acetate buffer, acetic acid is the weak acid and sodium acetate is its conjugate base. When a strong acid is added, such as hydrochloric acid, the conjugate base (sodium acetate) will react with the hydronium ions from the strong acid, forming acetic acid and water. This reaction prevents the pH of the solution from drastically changing.

Therefore, in a buffer system, the conjugate base is the species that will neutralize the addition of a strong acid.

Learn more about buffer system

https://brainly.com/question/33116679

#SPJ11

Answer: waffle = 2$  chicken = 3.25$

Step-by-step explanation: w=waffle c=chicken

W + 2C = 8.50

2w + c = 7.25

4w + 2c + 14.50  compared to w + 2c = 8.50

Each of last two orders have 2c so subtract chicken to leave waffles.

4w + 2c = 14.50

-  w + 2c =  8.50

3w         =  6.00  divide both sides of equal sign by 3 to find value of w

  w         =  2.00

If w=2$  and w+2c = 8.50,

then 2$ + 2c = 8.50

subtract 2$ from both sides of equal sign

2c = 6.50  divide both sides by 2 to find value of c

 c = 3.25

The correct option of the given statement "What is the systematic name of ammonia?" is D. Nitrogen Trihydride.

Ammonia is a compound composed of one nitrogen atom and three hydrogen atoms. In the systematic naming of compounds, the first element is named according to its elemental name, which is nitrogen in this case. The second element, hydrogen, is named "hydride" to indicate that it is a compound containing hydrogen.

To form the systematic name, we combine the names of the elements, with the name of the second element ending in "-ide." In this case, the systematic name becomes "Nitrogen Trihydride."

Option A, "Hydrogen Trinitrogen," does not follow the correct naming convention. Option B, "Trihydrigen Nitride," is also incorrect as it does not indicate that nitrogen is the first element. Option C, "Hydrogen Trinitride," is incorrect because it does not follow the correct naming convention for compounds.

In summary, the correct systematic name for ammonia is "Nitrogen Trihydride."

You can learn more about ammonia at: brainly.com/question/15409518

#SPJ11

The emissivity of the plate is 0.82. The absorptivity of the plate is 0.8. The radiosity of the plate is 2000 W/m². The net heat transfer rate per unit area is 296.2 W/m².

Given,The irradiation on the plate = 2500 W/m²

Reflected radiation = 500 W/m²

The plate temperature = 227°C

Emissive power of the plate = 1200 W/m²

Heat transfer coefficient = 15 W/m² K

Stefan–Boltzmann constant = 5.67 × 10⁻⁸ W/m²K⁴

Emissivity of the plate is given by

ε = Emissive power of the plate/Stefan–Boltzmann constant * Temperature⁴

= 1200/ (5.67 × 10⁻⁸) * (227 + 273)⁴

= 0.82

Absorptivity is given bya = Absorbed radiation / Incident radiation

= (Irradiation on the plate – Reflected radiation) / Irradiation on the plate

= (2500 – 500) / 2500

= 0.8

The radiosity of the plate is given by

J = aI

= 0.8 × 2500

= 2000 W/m²

The rate of heat transfer due to convection per unit area can be calculated using the relation.

q_conv = h × (T_surface – T_air)

= 15 × (227 – 127)

= 1500 W/m²

Now the net rate of heat transfer per unit area is given by,

q_net = aI – εσT⁴ – q_conv

= 0.8 × 2500 – 0.82 × 5.67 × 10⁻⁸ × (227 + 273)⁴ – 1500

= 296.2 W/m²

Know more about the emissivity

https://brainly.com/question/29485098

#SPJ11

Plusminus 2 percentage points, would be the most reliable as it reflects a higher level of precision and provides more confidence in the reported findings.The correct answer is option C.

When evaluating the reliability of a study, the error range is an important factor to consider. A smaller error range indicates a more reliable study because it reflects a higher level of precision in the data collected.

Among the given options, the study with an error range of plusminus 2 percentage points (option C) would be the most reliable. This narrower range means that the reported results are likely to be closer to the true value.

The smaller the error range, the more confidence we can have in the findings of the study.

In contrast, the studies with larger error ranges (options A, B, and D) would be less reliable. Option D, with an error range of plusminus 17 percentage points, indicates a wide range of potential error, making it difficult to draw meaningful conclusions from the study results.

Options A and B, with error ranges of plusminus 12 and plusminus 7 percentage points respectively, also have wider margins of error, indicating lower reliability.

In summary, a study with a smaller error range, such as plusminus 2 percentage points, would be the most reliable as it reflects a higher level of precision and provides more confidence in the reported findings.

For more such questions points,click on

https://brainly.com/question/23848540

#SPJ8

The probable question may be:

All else being equal, a study with which of the following error ranges would be the most reliable?

A. plusminus 12 percentage points

B. plusminus 7 percentage points

c. plusminus 2 percentage points

D. plusminus 17  percentage points

the values of x and y that satisfy the system of equations are x = -14/11 and y = 13/11.

To solve the system of linear equations using one of the three methods (elimination, substitution, or matrix inversion), let's first check the rank of matrix A and [A b].

The matrix A is a 3x2 matrix:

A = [2 3]

[-1 4]

[5 -6]

To find the rank of A, we can perform row operations to reduce the matrix to row-echelon form. The rank of A is equal to the number of non-zero rows in its row-echelon form.

Performing row operations on A, we have:

Row 2 = Row 2 + 0.5 * Row 1

Row 3 = Row 3 - 2.5 * Row 1

The row-echelon form of A is:

A = [2 3]

[0 5]

[0 -21]

Since A has two non-zero rows, the rank of A is 2.

Next, we check the rank of [A b]. The vector b is a 3x1 vector:

b = [1]

[6]

[-3]

We can append vector b as an additional column to matrix A:

[A b] = [2 3 1]

[-1 4 6]

[5 -6 -3]

Performing row operations on [A b], we have:

Row 2 = Row 2 + Row 1

Row 3 = Row 3 - 2 * Row 1

The row-echelon form of [A b] is:

[A b] = [2 3 1]

[0 7 7]

[0 -12 -5]

Since [A b] has two non-zero rows, the rank of [A b] is also 2.

Since the rank of A and [A b] are both 2, we can proceed with solving the system of linear equations using any of the three methods.

Let's use the method of matrix inversion to solve the system.

The system of equations can be written as a matrix equation:

Ax = b

To find x, we can multiply both sides of the equation by the inverse of A:

[tex]A^(-1) * A * x = A^(-1) * b[/tex]

[tex]I * x = A^(-1) * b[/tex]

[tex]x = A^(-1) * b[/tex]

To find the inverse of A, we can use the formula:

[tex]A^(-1) = (1 / (ad - bc)) * [d -b][-c a][/tex]

Plugging in the values of matrix A, we have:

[tex]A^(-1) = (1 / (2 * 4 - 3 * -1)) * [4 -3][1 2][/tex]

Calculating the inverse of A, we have:

A^(-1) = (1 / 11) * [4 -3]

[1 2]

Multiplying A^(-1) by vector b, we have:

[tex]x = (1 / 11) * [4 -3] * [1][6][-3][/tex]

Calculating the product, we get:

x = (1 / 11) * [4 * 1 + -3 * 6]

[1 * 1 + 2 * 6]

Simplifying, we have:

x = (1 / 11) * [-14]

[13]

Therefore, the solution to the system of linear equations is:

x = -14/11

y = 13/11

Hence, the values of x and y that satisfy the system of equations are x = -14/11 and y = 13/11.

To know more about row-echelon form.

https://brainly.com/question/30403280

#SPJ11

Answer:

The linear measure of an arc whose central angle is 144 on a circle of radius 35 inches is 28π inches or about 87.96 inches

Step-by-step explanation:

The linear measure of an arc is given by

[tex]s = 2\pi r(\alpha/360)[/tex]

Where, α is the central angle (in degrees) of the arc

In our case,

r = 35 inches

α = 144 degrees

So, the linear measure would be,

[tex]s = 2\pi(35) (144/360)\\s = 28\pi \\[/tex]

so s = 28π inches

or about 87.96 inches

To design the transverse reinforcement at the critical section for the beam, we need to calculate the required area of transverse reinforcement, Av, using the given information. Here are the steps:

1. Calculate the lever arm, d: Since the load, Pu, is off the longitudinal axis by 250 mm, the distance from the centroid of the reinforcement to the longitudinal axis is 250 mm + 0.5 * 500 mm (half the width of the beam). Therefore, d = 250 mm + 250 mm = 500 mm.
2. Calculate the required area of transverse reinforcement, Av:
  Av = (0.75 * Pu * d) / (fy * jd)
  where fy is the yield strength of the reinforcement and jd is the depth of the stress block.
3. Determine jd: For a rectangular beam, jd = 0.48 * d.
4. Substitute the values into the formula and calculate Av.

area of transverse : https://brainly.com/question/15531840

#SPJ11

$\cos 360^\circ = \cos^2 180^\circ - \sin^2 180^\circ$

To find the value of $\cos 360^\circ$, we need to evaluate both sides of the given equation and show that they are equal.

Left Hand Side (LHS):

Using the periodicity of the cosine function, we know that $\cos 360^\circ$ is equal to $\cos 0^\circ$. The cosine of 0 degrees is 1, so LHS = $\cos 0^\circ = 1$.

Right Hand Side (RHS):

Let's evaluate the RHS of the equation step by step. We know that $\cos 180^\circ = -1$ and $\sin 180^\circ = 0$. Substituting these values into the equation, we get:

RHS = $\cos^2 180^\circ - \sin^2 180^\circ = (-1)^2 - 0^2 = 1 - 0 = 1$.

Since both the LHS and RHS evaluate to 1, we can conclude that $\cos 360^\circ = \cos^2 180^\circ - \sin^2 180^\circ$.

Learn more about  value

brainly.com/question/30145972

#SPJ11

The actual microstructure can be influenced by factors such as cooling rate, impurities, and other alloying elements. For an 85 wt.% Pb-15 wt.% Mg alloy, the microstructure observed during slow cooling at different temperatures can be schematically represented as follows:

1. At 600°C:
- The microstructure consists of a single phase, which is a solid solution of lead (Pb) and magnesium (Mg).
- The approximate composition of this phase is 85 wt.% Pb and 15 wt.% Mg.

2. At 500°C:
- The microstructure still consists of a single phase, which is a solid solution of lead (Pb) and magnesium (Mg).
- The approximate composition of this phase remains the same at 85 wt.% Pb and 15 wt.% Mg.

3. At 270°C:
- The microstructure starts to show the formation of a second phase known as the eutectic phase.
- The eutectic phase is a mixture of lead (Pb) and magnesium (Mg) in a specific ratio.
- The approximate composition of the eutectic phase is determined by the eutectic composition of the alloy, which occurs at 61.9 wt.% Pb and 38.1 wt.% Mg.
- The remaining phase still consists of the solid solution with an approximate composition of 85 wt.% Pb and 15 wt.% Mg.

4. At 200°C:
- The microstructure further develops the eutectic phase, which starts to increase in volume.
- The approximate composition of the eutectic phase remains the same at 61.9 wt.% Pb and 38.1 wt.% Mg.
- The solid solution phase reduces in volume and has an approximate composition of 85 wt.% Pb and 15 wt.% Mg.

It's important to note that these sketches represent the general microstructural changes that occur during slow cooling for an 85 wt.% Pb-15 wt.% Mg alloy. The actual microstructure can be influenced by factors such as cooling rate, impurities, and other alloying elements.

To know more about Microstructure visit:

https://brainly.com/question/31789619

#SPJ11

Point A is likely the outlier in this scatter plot. the outlier on the scatter plot is point A (8, 1). option A

To identify the outlier on the scatter plot, we need to analyze the data points and look for any point that deviates significantly from the overall pattern or cluster of points.

Based on the given information, the scatter plot includes four points: D (1, 1), C (2, 3), B (7, 6), and A (8, 1). Additionally, there are four additional points: (2, 2), (4, 3), (5, 5), and (6, 4).

To visually assess the outlier, we can plot the points on a graph. Here is a visualization of the scatter plot with the points labeled:

     (6, 4)      (5, 5)

        |             |

(4, 3) --+-- (2, 2)    |

        |             |

C (2, 3) +-- (7, 6)    |

        |             |

        |             |

D (1, 1) A (8, 1) B (7, 6)

By examining the scatter plot, we can see that point A (8, 1) deviates significantly from the overall pattern. It is located far away from the other points and does not seem to follow the general trend or relationship between the variables.

Therefore, point A is likely the outlier in this scatter plot.

For more such questions on  scatter plot visit:

https://brainly.com/question/6592115

#SPJ8

The eigenvalue method involves finding eigenvalues and eigenvectors of a matrix, using them to construct the general solution, and then obtaining the particular solution by applying initial conditions.

To apply the eigenvalue method, we start by writing the given system of equations in matrix form:

X' = AX,

where X = [x₁, x₂]ᵀ is the column vector of the variables, X' represents the derivative with respect to time, and A is the coefficient matrix:

A = [9 5]

   [-6 -2]

Next, we find the eigenvalues and eigenvectors of matrix A. The eigenvalues (λ) satisfy the equation |A - λI| = 0, where I is the identity matrix. Solving this equation, we get:

|9 - λ  5|

|-6  -2 - λ| = 0

Expanding the determinant and solving, we find two eigenvalues:

λ₁ = -1, λ₂ = 10.

To find the eigenvectors corresponding to each eigenvalue, we substitute them back into the equation (A - λI)v = 0, where v is the eigenvector. Solving these equations, we obtain two linearly independent eigenvectors:

v₁ = [1, -2]ᵀ, v₂ = [1, 3]ᵀ.

The general solution of the system is then given by:

X = c₁e^(λ₁t)v₁ + c₂e^(λ₂t)v₂,

where c₁ and c₂ are constants. Substituting the values of the eigenvalues and eigenvectors, we have:

X = c₁e^(-t)[1, -2]ᵀ + c₂e^(10t)[1, 3]ᵀ.

To find the particular solution corresponding to the initial conditions x₁(0) = 1 and x₂(0) = 0, we substitute these values into the general solution and solve for the constants:

[1, 0]ᵀ = c₁[1, -2]ᵀ + c₂[1, 3]ᵀ.

Solving this system of equations, we find c₁ = -1/3 and c₂ = 4/3.

Therefore, the particular solution corresponding to the initial conditions is:

X = -1/3e^(-t)[1, -2]ᵀ + 4/3e^(10t)[1, 3]ᵀ.

Note: The solution is real and does not have complex parts.

To learn more about "matrix" refer here:

https://brainly.com/question/27929071

#SPJ11

the Fourier Series of the given periodic function is:

[tex]f(t) = a₀ + ∑[from n = 1 to ∞] aₙ cos(nt)[/tex]

Substituting the value of a₀ = 3, we have:

[tex]f(t) = 3 + ∑[from n = 1 to ∞] 0 cos(nt) = 3[/tex]

The Fourier series of the periodic function f(t)=3t², -1

Since the function f(t) is constant within the intervals -π ≤ t ≤ 0 and 0 ≤ t ≤ π, the integral becomes:

bₙ = (1/π) ∫[from -π to 0] 4 sin(nt) dt + (1/π) ∫[from 0 to π] -1 sin(nt) dt

Evaluating the integrals, we find:

bₙ = (1/π) [-4/n cos(nt)]∣∣[from -π to 0] - (1/π) [cos(nt)]∣∣[from 0 to π]

Simplifying, we get:

bₙ = (1/π) (4/n - 4/n - (1/n - 1/n)) = 0

Since the coefficient bₙ is zero for all values of n, the Fourier Series of f(t) consists only of the cosine terms.

Therefore,

To know more about periodic visit:

https://brainly.com/question/16061498

#SPJ11

Among the given options, none of them describes the reactor type best for a car with a constant air ventilation rate

A reactor is a machine or vessel used for the manufacture of chemical reactions. The reactor can be cylindrical, spherical, conical, or some other geometric form. The reactor's size may range from a fraction of a cubic centimeter to several cubic meters.

The types of reactors are:

- Plug flow reactor: It is a type of chemical reactor where the fluid moves continuously through the reactor. In this type of reactor, the chemical reaction proceeds as the chemicals move along the reactor's length.

- Completely mixed flow reactor: In this type of reactor, chemicals are uniformly distributed throughout the reactor, and the reaction is done. It's also known as a continuous stirred tank reactor (CSTR).

- Batch reactor: A reactor is a machine or vessel used for the manufacture of chemical reactions. In a batch reactor, chemicals are combined in a single batch and then processed. In the reactor, there is no input or output of chemicals while the reaction is taking place.

So, none of the given options describes the reactor type best for a car with a constant air ventilation rate. As the ventilation rate is constant, there's no input or output of air, and there's no reaction occurring. Thus, none of the given options is applicable.

To know more about reactor, visit:

https://brainly.com/question/29123819

#SPJ11

All of the above factors (d) no. cycles for each stress range, temperature of steel in service, and environment affect the fatigue strength of a steel member connection.

Fatigue strength is the stress level that a material can withstand for a specified number of stress cycles before failing or breaking. The fatigue strength of a steel member connection is influenced by various factors, including:

no. cycles for each stress range The number of cycles for each stress range is a significant factor affecting the fatigue strength of a steel member connection. The fatigue life of a connection decreases as the number of cycles increases. This phenomenon is known as fatigue life reduction. The durability of a connection is inversely proportional to the number of cycles it can withstand. The number of cycles to failure decreases as the stress range increases.temperature of steel in service

The temperature of the steel in service also affects the fatigue strength of a steel member connection. High temperatures cause material properties to deteriorate, lowering the connection's fatigue strength. It is critical to maintain a low-temperature service environment to avoid material degradation.environmentThe environment in which the steel member connection is placed affects its fatigue strength. The corrosion of the connection reduces its fatigue strength. As a result, it is critical to maintain a clean and dry environment to maintain the connection's durability.All of these variables are significant in determining the fatigue strength of a steel member connection.

To know more about fatigue strength visit:

https://brainly.com/question/14034771

#SPJ11