Answer:
ΔU = 2 mg h
Explanation:
In a spring mass system the potential energy is U = m g h
where h is measured from the equilibrium point of the spring
the potential energy at the highest point is
U₁ = m g h
the potential energy at the lowest point is
U₂ = m g (-h)
instead in this energy it is
ΔU = 2 mg h
In this two points the kinetic energy is zero, but there is elastic potential energy that has the same value in the two points, so its change is zero
Potential energy is defined as the energy stored in a body which may convert into kinetic energy when moved.
The Formule of the potential energy is [tex]mgh[/tex] The correct answer is 0
Hence, [tex]U = 2 mg h[/tex]
The H stated as the measured from the equilibrium point of the spring
Therefore, the potential energy at the maximum point is [tex]U_1 = m g h[/tex] and the potential energy at the minimum point is [tex]U_2 = m g (-h)[/tex]
Hence, after solving it we got
[tex]U_1 -U_2 = 2 mg h[/tex]
Therefore, the energy change in the process is 0.
For more information, refer to the link:-
https://brainly.com/question/2127750
Consider a person standing in an elevator that is moving at a constant velocity down. The upward normal force N exerted by the elevator floor on the person is Select one: a. smaller than the downward force of gravity on the person. b. identical to the downward force of gravity on the person. c. larger than the downward force of gravity on the person.
Answer:
b. identical to the downward force of gravity on the person.
Explanation:
For an object in an elevator,
F = mg - ma (g > a)
But since the velocity is uniform, a = 0.
Then,
F = mg - 0
F = mg
This is the actual weight of the object.
The object does not feel weightless, so that its actual weight can be measured during the downward motion of the elevator with uniform velocity.
Thus, the upward normal force, N, exerted by the elevator floor on the person is identical to the downward force of gravity on the person.
A 5 kg bowling ball with a velocity of +10 m/s collides with a stationary 2 kg bowling pin. If the ball's final velocity is +8 m/s, what is the pin's final velocity?
a 5 m/s
b 2.5 m/s
c 10 m/s
d 5.2 m/s
Answer:
The pin's final velocity is 5m/sExplanation:
Step one:
given data
mass of ball m1=5kg
initial velocity of ball u1=10m/s
mass of pin m2=2kg
initial velocity of pin u2= 0m/s
final velocity of ball v2=8m/s
final velocity of pin v2=?
Step two:
The expression for elastic collision is given as
m1u1+m2u2=m1v1+m2v2
substituting we have
5*10+2*0=5*8+2*v2
50+0=40+2v2
50-40=2v2
10=2v2
divide both sides by 2
v2=10/2
v2=5m/s
The pin's final velocity is 5m/s
answer? physics Q for 3rd secondary..
Answer:
The 300 Ohm resistor
Explanation:
They are in series, so the current has to be the same in both. P = I^2R, so with the same current, the larger resistor dissipates more power.
What is the de Broglie wavelength of an electron accelerated from rest through a potential difference of 50.0 V?
(a) 0.100 nm
(b) 0.139 nm
(c) 0.174 nm
(d) 0.834 nm
(e) none of those answers
Answer:
(c) 0.174 nm
Explanation:
According to de Broglie hypothesis, the wavelength of the wave associated with electron is given by:
[tex] \boxed{ \bf{\lambda = \sqrt{\dfrac{150}{V \ (in \ Volt)}} \: \text{\AA}}}[/tex]
V → Potential Difference (50.0 V)
By substituting value of potential difference in the equation, we get:
[tex] \rm \longrightarrow \lambda = \sqrt{\dfrac{150}{50}} \: \text{\AA} \\ \\ \rm \longrightarrow \lambda = \sqrt{3} \: \text{\AA} \\ \\ \rm \longrightarrow \lambda = 1.74 \: \text{\AA} \\ \\ \rm \longrightarrow \lambda = 0.174 \: nm[/tex]
20- A gram of distilled water at 4° C:
(a) will increase slightly in weight when heated to 6 C
(b) will decrease slightly in weight when heated to 6 C
(C) will increase slightly in volume when heated to 6 C
(d) will decrease slightly in volume when heated to 6 C
(e) will not change in either volume or weight
Answer:
D. will decrease slightly in volume when heated to 6° C
Explanation:
A gram of distilled water at 4° C will increase slightly in volume when heated to 6 C. Hence option C is correct.
What is Water ?Water has the chemical formula H2O, making it an inorganic substance. It is the primary chemical component of the Earth's hydrosphere and the fluids of all known living things (in which it serves as a solvent[1]). It is translucent, flavourless, odourless, and almost colourless. In spite of not supplying food, energy, or organic micronutrients, it is essential for all known forms of life. Its molecules are made up of two hydrogen atoms joined by covalent bonds and have the chemical formula H2O. The angle at which the hydrogen atoms are joined to the oxygen atom is 104.45°.[2] The liquid condition of H2O at normal pressure and temperature is known as "water" as well.
Water occurs because the environment on Earth is pretty near to the triple point of water.
To know more about Water :
https://brainly.com/question/28465561
#SPJ2.
Why evaporation takes place from the Surface?
Answer:
in the water cycle evaporation occurs when the sunlight warms the surface of the water the heat from the sun makes the water molecules move faster and faster until they move so fast they can escape as a gas once evaporated a molecule from water that vapor spends about 10 days in the air
A force of 150 N is applied on an object at 60 degrees above the positive x-axis. Determine its
horizontal and vertical components.
Answer:
horizontal component=fcostita
=150cos60
use calculator to evaluate it
for vertical=fsintita
=150sin60
Find the wavelength of light that has its third minimum at an angle of 48.6º when it falls on a single slit of width 3.00 μm .
Answer:
750 nm
Explanation:
It is given that,
Third minimum is at an angle of 48.6º when it falls on a single slit of width 3.00 μm.
We need to find the wavelength of the light. For a single slit experiment, the relation between wavelength and slit width is given by :
[tex]d\sin\theta=n\lambda[/tex]
For third minimum, n = 3
[tex]\lambda=\dfrac{d\sin\theta}{n}\\\\\lambda=\dfrac{3\cdot10^{-6}\cdot\sin48.6}{3}\\\\\lambda=7.5\times 10^{-7}\ m\\\\\lambda=750\ nm[/tex]
So, the wavelength of light is 750 nm.
A car is traveling at 60 mph. If the rate of speed increases 4 mph each hour,
how long will it be before the car is traveling at a rate of 80 mph?
A) 4 hours
B) 5 hours
C) 6 hours
D 7 hours
Answer:
5 hours ................
Answer:
B=5 hrs
explanation:
becoz if you add 4 mph/hr
it will graually be 80 in 5 hrs
you drive your car at a speed of 40 km/hr then slow down to 30km/hr
Answer:
3
Explanation:
3
A painter on a scaffold drops a 1.25 kg can of paint from a height of 5.00 m.
a) What is the kinetic energy of the can when the can is at a height of 3.00 m?
b) With what speed will the can hit the ground? (Neglect air resistance)
Answer:
(a) The kinetic energy of the can when the can is at a height of 3.00 m.
(b) The speed with which the can will hit the ground is 9.9 m/s
Explanation:
(a) Kinetic energy is a form of energy. It is defined as the energy associated with bodies that are in motion and this energy depends on the mass and speed of the body.
Kinetic energy is defined as the amount of work necessary to accelerate a body of a given mass and at rest, until it reaches a given speed.
Kinetic energy is represented by the following formula:
Ec = ½ mv²
Where Ec is kinetic energy, which is measured in Joules (J), m is mass measured in kilograms (kg), and v is velocity measured in meters over seconds (m/s).
On the other hand, potential energy is the energy that measures the ability of a system to perform work based on its position. In other words, this is the energy that a body has at a certain height above the ground.
Gravitational potential energy is the energy associated with the gravitational force. This will depend on the relative height of an object to some reference point, the mass, and the force of gravity. Then for an object with mass m, at height h, the expression applied to the gravitational energy of the object is:
Ep = m g h
Where Ep is the potential energy in joules (J), m is the mass in kilograms (kg) is h the height in meters (m) and g is the acceleration of fall in m/s² (approximately 9.8 m/s²)
Energy is neither created nor destroyed, but only transforms from one state to another. This principle also extends to mechanical energy, so that in an isolated system, the sum of kinetic and potential energies between two instants of time remains constant:
½ m*v1² + m*g*h1= ½ m*v2² + m*g*h2
where v1 and h1 are the initial speed and height and v2 and h2 the final speed and height.
In this case:
v1= 0 m/sh1= 5 mv2= ?h2= 3 mReplacing:
½ m*0² + m*g*5= ½ m*v2² + m*g*3
Solving:
m*g*5= ½ m*v2² + m*g*3
The mass m appears in all terms, being able to simplify:
g*5= ½ v2² + g*3
Solving for v2:
[tex]v2=\sqrt{\frac{g*5-g*3}{\frac{1}{2} } }[/tex]
being g= 9.8 m/s²:
v2= 6.26 m/s
The speed at 3 meters height is 6.26 m/s
Then the kinetic energy is calculated as:
Ec = ½ mv²
Ec = ½ 1.25 kg* (6.26 m/s)²
Ec= 24.49 J
The kinetic energy of the can when the can is at a height of 3.00 m.
(b) You know:
½ m*v1² + m*g*h1= ½ m*v2² + m*g*h2
where v1 and h1 are the initial speed and height and v2 and h2 the final speed and height.
In this case:
v1= 0 m/sh1= 5 mv2= ?h2= 0 mReplacing:
½ m*0² + m*g*5= ½ m*v2² + m*g*0
Solving:
m*g*5= ½ m*v2²
g*5= ½ v2²
[tex]v2=\sqrt{\frac{g*5}{\frac{1}{2} } }[/tex]
being g= 9.8 m/s²:
v2= 9.9 m/s
The speed with which the can will hit the ground is 9.9 m/s
why is a mountain ? what is a animal ? what is love ?
Answer:
When we love someone we experience the same positive thoughts and experiences as when we like a person. But we also experience a deep sense of care and commitment towards that person. Being “in love” includes all the above but also involves feelings of sexual arousal and attraction.
Explanation:
if on the average every man lives for 70 years, for how many microseconds is this life span
Answer:
3.1556926 × 10^13 microseconds
Explanation:
Hope this helped!
if on the average every man lives for 70 years, 3.1556926 × 10^13 microseconds is this life span
what is lifespan ?life span of an organism can be defined as the period of time between the birth and death of an organism, it is a common place that all organisms die.
Some of the organism die after a brief existence, for example mayfly, whose adult life burns out in a day, and the gnarled bristlecone pines, which have lived thousands of years.
The limits of the life span of each species appear to be determined by heredity, it can be locked within the code of the genetic material which are the instructions specify the age.
For more details regarding life span, visit
https://brainly.com/question/23936206
#SPJ2
What average net force is required to accelerate a car with a mass of 1200 kg from rest to 27.0 m/s2 in 10.0 s ?
1620 N
4360 N
444 N
11800 N
3240 N
The average net force required to accelerate the car is 3240 N
What is acceleration?This is defined as the rate of change of velocity which time. It is expressed as
a = (v – u) / t
Where
a is the acceleration v is the final velocity u is the initial velocity t is the time How to determine the acceleration Initial velocity (u) = 0 m/sFinal velocity (v) = 27 m/sTime (t) = 10 sAcceleration (a) =?a = (v – u) / t
a = (27 – 0) / 10
a = 2.7 m/s²
How to determine the forceMass (m) 1200 KgAcceleration (a) = 2.7 m/s²Force (F) = ?F = ma
F = 1200 × 2.7
F = 3240 N
Learn more about acceleration:
https://brainly.com/question/491732
#SPJ6
A student bought a 1.55-ounce chocolate bar and left it in
a car on a hot day.
How many ounces of chocolate are in the melted bar?
A. Exactly 1.55 ounces
B. At least 1.55 ounces
C. An unknown number of ounces
D. Less than 1.55 ounces
Answer:
a
Explanation:
A student bought a 1.55-ounce chocolate bar and left it in a car on a hot day. Exactly 1.55 ounces of chocolate are in the melted bar. Hence, option (A) is correct.
What is mass?In physics, mass is a quantitative measurement of inertia, a basic characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force.
The change caused by an applied force is smaller the more mass a body has. The kilogram serves as the unit of mass in the International System of Units (SI).
As mass does not depends on the state of the object, exactly same mass of chocolate are in the melted bar that it was in chocolate bar. So, 1.55 ounces of chocolate are in the melted bar. Hence, option (A) is correct.
Learn more about mass here:
https://brainly.com/question/19694949
#SPJ2
The x component of vector A is -25.0m and the y component id +40.0m (a) what is the magnitude of A?(b) What is the angle between the direction of A and the positive direction of x?
Answer:
θ = 122°
Explanation:
Components of a Vector
A vector in the plane can be defined by its rectangular components:
[tex]\vec A =<x,y>[/tex]
Or also can be given by its polar components:
[tex]\vec A =<r,\theta>[/tex]
Where r is the magnitude of the vector and θ is the angle it forms with the positive direction of x.
The relation between them is:
[tex]r=\sqrt{x^2+y^2}[/tex]
[tex]\displaystyle \theta=\arctan\frac{y}{x}[/tex]
It's given the x-component of vector A is x=-25 m and the y-component is y=40 m
(a)
The magnitude of the vector is:
[tex]r=\sqrt{(-25)^2+40^2}[/tex]
[tex]r=\sqrt{625+1600}[/tex]
[tex]r=\sqrt{2225}[/tex]
[tex]r\approx 47.2\ m[/tex]
(b)
[tex]\displaystyle \theta=\arctan\frac{40}{-25}[/tex]
[tex]\displaystyle \theta=\arctan (-1.6)[/tex]
The calculator gives us the value
θ = -58°
But the real angle lies on the second quadrant since x is negative and y is positive, thus:
θ = -58° + 180° = 122°
θ = 122°
4. A substance has a density of 0.79 g/cm'. It is soluble in water. List all the possibilities of what it might be How could you determine the actual identity?
Answer:
See explanation
Explanation:
Given that the density of the unknown substance is 0.79 g/cm3 and is soluble in water, the possible substances it could be are;
i) t-butanol
ii) ethanol
iii) 2-propanol
iv) acetone
However, the actual identity of the unknown substance can be obtained by carrying out a boiling point test. The four substances listed above have different boiling points. Hence the boiling point of the unknown substance ultimately discloses its identity.
Match the term to its correct definition:
____ 1. Test variable (independent variable)
A. This is what is being measured during a scientific investigation.
____ 2. Outcome variable (dependent variable)
B. This serves as a reference for comparison during a scientific investigation.
____ 3. Control group
C. This is what is being purposefully changed during the scientific investigation.
Answer:
1. C
2. B
3. A
Explanation:
Hope this helped!
In the winter sport of curling, players give a 20 kg stone a push across a sheet of ice. The Slone moves approximately 40 m before coming to rest. The final position of the stone, in principle, onlyndepends on the initial speed at which it is launched and the force of friction between the ice and the stone, but team members can use brooms to sweep the ice in front of the stone to adjust its speed and trajectory a bit; they must do this without touching the stone. Judicious sweeping can lengthen the travel of the stone by 3 m.1. A curler pushes a stone to a speed of 3.0 m/s over a time of 2.0 s. Ignoring the force of friction, how much force must the curler apply to the stone to bring it op to speed?A. 3.0 NB. 15 NC. 30 N
D. 150 N2The sweepers in a curling competition adjust the trajectory of the slope byA. Decreasing the coefficient of friction between the stone and the ice.
B. Increasing the coefficient of friction between the stone and the ice.C. Changing friction from kinetic to static.D. Changing friction from static to kinetic.3. Suppose the stone is launched with a speed of 3 m/s and travel s 40 m before coming to rest. What is the approximate magnitude of the friction force on the stone?A. 0 NB. 2 NC. 20 ND. 200 N4. Suppose the stone's mass is increased to 40 kg, but it is launched at the same 3 m/s. Which one of the following is true?A. The stone would now travel a longer distance before coming to rest.B. The stone would now travel a shorter distance before coming to rest.C. The coefficient of friction would now be greater.D. The force of friction would now be greater.
Answer:82. Since you have a distance and a force, then the easiest principle to use is energy, i.e. work.
The work done by friction is F * d. This work cancels out the kinetic energy of the stone (1/2)mv^2
Fd = (1/2)mv^2
F = (1/2)mv^2/d.
Plug in m = 20 kg, v = 3 m/sec, d = 40 m.
83. With more mass, the kinetic energy is higher now. The work needed is higher. W = F * d and F is the same.
Explanation:Hope I helped :)
Jessica pulls on a washing machine with 200 N of force. Mark helps out and pulls on the washing machine in the same direction with 400 N of force. What is the net force on the washing machine
Answer:
600N
Explanation:
A tungsten filament at 25-degree celsius has a resistance of 0.350 ohms. What would be the resistance if the temperature is increased to 2850°C? The temperature coefficient of resistance for tungsten is 0.5*10^-3 /°C
Answer:
R₂₈₅₀ = 0.838 ohms
Explanation:
The resistance of an element at some other temperature than 0°C can be given by the following formula:
Rₓ = R₀(1 + ∝ΔT)
where,
Rₓ = Resistance at temperature x
R₀ = Resistance at 0°C
∝ = Coefficient of linear expansion of tungsten = 0.5 x 10⁻³ /°C
ΔT = Change in Temperature
So, for the resistance of tungsten wire at 25°C:
Rₓ = R₂₅ = 0.35 ohms
ΔT = 25°C
Therefore,
0.35 ohms = R₀[1 + (0.5 x 10⁻³ /°C)(25°C)]
R₀ = (0.35 ohms)/1.0125
R₀ = 0.345 ohms
Now, we find the resistance at 2850°C
R₂₈₅₀ = (0.345 ohms)[1 + (0.5 x 10⁻³ /°C)(2850°C)]
R₂₈₅₀ = 0.838 ohms
What is the answer to this question
Answer:
0.11 m/s
Explanation:
From the question given above, the following data were obtained:
Initial displacement (d1) = 1.09 m
Final displacement (d2) = 2.55 m
Time (t) = 12.8 s
Average velocity =?
Next, we shall determine the total displacement (i.e change in displacement). This can be obtained as follow:
Initial displacement (d1) = 1.09 m
Final displacement (d2) = 2.55 m
Total displacement = d2 – d1
Total displacement = 2.55 – 1.09
Total displacement = 1.46 m
Finally, we shall determine the average velocity of the beetle. This can be obtained as follow:
Total Displacement = 1.46 m
Total time (t) = 12.8 s
Average velocity =?
Average velocity = Total Displacement / Total time
Average velocity = 1.46/12.8
Average velocity = 0.11 m/s
Thus, the average velocity of the beetle is 0.11 m/s
The CEO, ellen misk, left her martian office but accidentally left a cylindricall can of coke (3.1 inches in diameter, 5.42 inches in height) on her desk. If the can exerts a pressure of 510 Pascals, what is the specific gravity of the can?
Answer:
Specific Gravity = 0.378
Explanation:
First, we will find the force exerted by the can on the table. This force will be equal to the weight of the can:
Pressure = Force/Area = Weight/Area
Weight = Pressure*Area
where,
Area = πdiameter²/4 = π[(3.1 in)(0.0254 m/1 in)]²/4 = 4.8 x 10⁻³ m²
Weight = (510 N/m²)(4.8 x 10⁻³ m²)
Weight = 2.48 N
Now, the weight is given as:
Weight = mg
2.48 N = m(9.8 m/s²)
m = (2.48 N)/(9.8 m/s²)
m = 0.25 kg
Now, we calculate volume of can:
Volume = (Area)(Height) = (4.8 x 10⁻³ m²)(5.42 in)(0.0254 m/1 in)
Volume = 6.6 x 10⁻⁴ m³
Hence, the density of can will be:
Density of Can = m/Volume = 0.25 kg/6.6 x 10⁻⁴ m³
Density of Can = 378.32 kg/m³
So, the specific gravity of Can will be:
Specific Gravity = Density of Can/Density of Water
Specific Gravity = (378.32 kg/m³)/(1000 kg/m³)
Specific Gravity = 0.378
2. A force of 500 N separates two objects. The distance between their centers is 67 m. The first object has a mass of 20 kg. What is the mass of the second object?
Answer:
The Equation of Newton's Law of Gravity. G is called the Gravitational Constant, and has the value 6.67×10-11 N ∙m2kg-2 (N is for Newton, the physicists' unit of force)or 1.5×10-11 lb∙m2kg-2
Explanation:
Gravitational force is an attractive force that exists between all objects with mass . an object with mass attracts another object with mass.
Mass of second object is [tex]1.6825*10^{15}[/tex] kg
If two bodies have mass m₁ and m₂ . Then attractive force between them is calculated by formula show below,
[tex]F=G\frac{m1m2}{r^{2} }[/tex]
Where r is distance between bodies. and G is gravitational constant.
G = [tex]6.67*10^{-11}[/tex] [tex]Nm^{2}/kg^{2}[/tex]
Here, F = 500N, m₁=20 kg and r= 67 m
Substituting above values in force equation.
[tex]500=\frac{6.67*10^{-11}*20*m2 }{(67)^{2} } \\\\m2=1.6825*10^{15} Kg[/tex]
Learn more:
https://brainly.com/question/17728085
describe three possible careers in physical science
Answer:
physical sicence boilagiy sxcience and earth science
Explanation:
A plane mirror is placed to the right of an object. The image formed by the mirror will be a
real image that appears to be on the right of the mirror.
real image that appears to be on the left of the mirror.
virtual image that appears to be on the right of the mirror.
virtual image that appears to be on the left of the mirror.
Hamish is studying what happens when he sends a sound wave through different mediums, and he records his data in a table.
A 2-column table with 4 rows titled Hamish's Waves. The first column labeled Wave has entries 1, 2, 3, 4. The second column labeled Information has entries liquid, solid, gas, liquid.
Which statement could made about the data collected in Hamish’s table?
Wave 1 will move the fastest.
Wave 2 will move the slowest.
Wave 3 will move the slowest.
Wave 4 will move the fastest.
What is common between transverse waves and longitudinal waves?
Both include an amplitude, crest, and rarefactions
Both move faster at higher temperatures
Both move slower through densely packed molecules
Both include a wavelength from compression to compression
An angle of refraction is the angle between the refracted ray and the
incident ray.
normal.
medium.
boundary.
Answer:
A plane mirror is placed to the right of an object. The image formed by the mirror will be a virtual image that appears to be on the left of the mirror.
Explanation:
At noon on a clear day, sunlight reaches the earth's surface at Madison, Wisconsin, with an average intensity of approximately 2.00 kJ·s−1·m^−2. If the sunlight consists of photons with an average wavelength of 510.0 nm, how many photons strike a 5.20 cm^2 area per second?
Answer:
The number of photons per second that strike the given area is 2.668 x 10⁸ photons/second
Explanation:
Given;
intensity of the sunlight, I = 2.00 kJ·s−1·m^−2
area of incident, A = 5.2 cm² = 5.2 x 10⁻⁴ m²
Energy of incident photons per second on the given area;
E = IA
E = (2000)( 5.2 x 10⁻⁴)
E = 1.04 J/s
Energy of a photon is given is by;
[tex]E = \frac{hc}{\lambda} \\\\E = \frac{(6.626*10^{-34})(3*10^8)}{(510*10^{-9})}\\\\E = 3.898*10^{-19} \ J/photon[/tex]
The number of photons per second that strike the given area is;
[tex]n = \frac{1.04 \ J/s}{3.898*10^{-19} \ J/photon} \\\\n = 2.668*10^{18} \ photons/second[/tex]
Therefore, the number of photons per second that strike the given area is 2.668 x 10⁸ photons/second
what is the speed of rocket that travels 9km in 10 seconds
Answer:
900
Explanation:
v = s / t = 9000m / 10 s = 900m/s
Explanation:
The speed of a rocket that travel 9km in 10 second is 900
Can someone please answer how to convert mass into weight?
Answer:
To find the weight of something, simply multiply its mass by the value of the local gravitational field, and you get a result in newtons (N). For example, if your mass is 50 kg (about 110 pounds), then your weight is (50) (9.8). The point that must be overwhelmingly emphasized is that weight is a force.
Explanation:
The Magnetic Dipole Moment of a Coil Problem A rectangular coil of dimensions 5.40 cm ✕ 8.50 cm consists of 25 turns of wire and carries a current of 20.0 mA. A 0.350 T magnetic field is applied parallel to the plane of the loop. A. What is the magnitude of its magnetic dipole moment?B. What is the magnitude of the torque acting on the loop?
Answer:
a
[tex]\mu = 0.0023 \ A\cdot m^2[/tex]
b
[tex]\tau = 0.00080 \ N \cdot m[/tex]
Explanation:
From the question we are told that
The dimensions of the rectangular coil is 5.40 cm ✕ 8.50 cm = 0.054 m X 0.085 m
The number of turns is [tex]N = 25 \ turns[/tex]
The current it is carrying is [tex]I = 20 \ mA = 0.02 \ A[/tex]
The magnetic field is [tex]B = 0.350 \ T[/tex]
Generally the magnitude of the magnetic dipole moment is mathematically represented as
[tex]\mu = N * I * A[/tex]
Here A is the area which is mathematically represented as
[tex]A = 0.054 * 0.085[/tex]
=> [tex]A = 0.00459 \ m^2[/tex]
So
[tex]\mu = 25 * 0.02 * 0.00459[/tex]
=> [tex]\mu = 0.0023 \ A\cdot m^2[/tex]
Generally the magnitude of the torque acting on the loop is mathematically represented as
[tex]\tau = \mu * B[/tex]
=>[tex]\tau = 0.0023 * 0.350[/tex]
=>[tex]\tau = 0.00080 \ N \cdot m[/tex]