Absolute zero, technically known as zero kelvins, equals −273.15 degrees Celsius, or -459.67 Fahrenheit, and marks the spot on the thermometer where a system reaches its lowest possible energy, or thermal motion.
The Slingshot is a ride for two people. It consists of a single passenger cage, two towers, and two elastic bands. Potential energy is stored in the elastic bands and the passenger cage is released. On the way up, this potential energy in the elastic bands is converted into the kinetic energy of the cage. At the maximum height of the ride, the energy has been converted into gravitational potential energy of the cage. The slingshot has two towers of height h = 76 m. The towers are a distance d = 31 m apart. Each elastic band has an unstretched length of L0 = 41 m and a spring constant of k = 310 N/m. The total mass of the passengers and cage is m = 410 kg. The car is pulled down to the ground in the middle of the two towers.
Calculate the maximum height, in meters, of the ride.
my bad I was in a herie last time can you please answer my question , I am going to give you the 5 points back for this question and extra 30 points ,
Explanation:
first its going to say 10 points for my question but after that I well make answer a small question and give you 30points. like whats your favorite color . stay tuned .
Answer:
The maximum height reached by the ride after it was pulled to the ground is 51.6 m.
The given parameters;
Distance between the two towers, d = 31 mHeight of the tower, h = 76 mUnstretched length of the band, L₀ = 41 mElastic constant of the band, k = 310 N/mThe distance half-way between the bands;
[tex]\frac{d}{2} = \frac{31}{2} = 15.5 \ m[/tex]
The maximum length of the band when stretched is calculated as;
[tex]c^2 = 15.5^2 + 76^2\\\\c^2 = 6016.25\\\\c = \sqrt{6016.25} \\\\c = 77.57 \ m[/tex]
The extension of the elastic band;
x = 77.57 m - 41 m
x = 36.37 m
The elastic potential energy stored in the band;
[tex]E = \frac{1}{2} kx^2\\\\E = \frac{1}{2} \times 310 \times (36.57)^2\\\\E = 207,291.56 \ J[/tex]
The elastic potential energy of the elastic band will be converted into kinetic energy of the ride and the speed of the ride is calculated as;
[tex]E = \frac{1}{2} mv^2\\\\207,291.56 = \frac{1}{2} \times 410 \times v^2\\\\v^2 = \frac{207,291.56}{(0.5\times 410)} \\\\v^2 = 1011.178\\\\v = \sqrt{1011.178} \\\\v = 31.8 \ m/s[/tex]
The maximum height reached by the ride is calculated as;
[tex]P.E = K.E\\\\mgh = \frac{1}{2} mv^2\\\\h = \frac{v^2}{2g} \\\\h = \frac{(31.8)^2}{(2\times 9.8)} \\\\h = 51.6 \ m[/tex]
Thus, the maximum height reached by the ride is 51.6 m.
Learn more here: https://brainly.com/question/156316
Ask For
6.
A horizontal 100 N force is applied to a 50 kg classmate resting on a level tile
floor. The coefficient of kinetic friction is 0.15.
a. Draw a force diagram to represent this situation.
b. What is the acceleration of the classmate?
c. Suppose the classmate was resting on a carpet where the coefficient of static
friction is 0.25. Is the horizontal 100 N force sufficient to cause the classmate to
accelerate? Draw a force diagram, and then explain why or why not.
A person standing a certain distance from four identical loudspeakers is hearing a sound level intensity of 125 dB. What sound level intensity would this person hear if all but one are turned off?
Answer:
[tex]\mathbf{\beta = 123.75 \ dB}[/tex]
Explanation:
From the question, using the expression:
[tex]125 \ dB = 10 \ log (\dfrac{I}{I_o})[/tex]
where;
[tex]I_o = 10^{-12} \ W/m^2[/tex]
[tex]I = 10^{12.5} \times 10^{-12} \ W/m^2[/tex]
[tex]I = 3.162 \ W/m^2[/tex]
This is a combined intensity of 4 speakers.
Thus, the intensity of 3 speakers = [tex]\dfrac{3.162\times 3}{4}[/tex]
= 2.372 W/m²
Thus;
[tex]\beta = 10 \ log ( \dfrac{2.372}{10^{-12}} ) \ W/m^2[/tex]
[tex]\mathbf{\beta = 123.75 \ dB}[/tex]
A 1430 kg is moving at 25.6 m/s when a force is applied, in the direction of the cars motion. The car speeds up to 31.3 m/s. If the force is applied for 5.4 s what is the magnitude of the force
The car accelerates with magnitude a such that
31.3 m/s = 25.6 m/s + a (5.4 s)
→ a = (31.3 m/s - 25.6 m/s) / (5.4 s) ≈ 1.056 m/s²
Then the applied force has a magnitude F of
F = (1430 kg) a ≈ 1500 N
What is the wavelength of a wave whose velocity is 12m/s and has a frequency of .75 Hz?
Answer:
16 meters
Explanation:
Use the formula that relates frequency velocity and wavelength:
velocity = wave-length x frequency
in our case:
12 m/s = wave-length * 0.75 Hz
wave-length= 12/0.75 m = 16 meters
what is the initial position of the object?
a. 2m b. 4m c. 6m d. 8m e. 10 m
what is the velocity of the object?
a. -10 m/s b. -5 m/s c. 0 m/s d. 5 m/s e. 10 m/s
which of the following is true?
a. the object increase its velocity.
b. the object decrease its velocity.
c. the objects velocity stays unchanged.
d. the object stays at rest.
e. more information is required.
Answer:
e:10 m b: -5 m/s b.The object decreases its velocity.
Explanation:
If the magnitude of the electric field of an electromagnetic wave is 3x10^3 V/m, what is the the magntude of the magnetic field?
a. 1.1 x 10^-12 T
b. 9 x 10^11 T
c. 10^5 T
d. 10^-5 T
e. 3 x 10^3 T
Answer:
The value of the magnetic field is [tex]B = 1.0*10^{-5} \ T[/tex]
The correct option is d
Explanation:
From the question we are told that
The magnitude of the electric field is [tex]E = 3*10^{3} \ V/m[/tex]
Generally the magnitude of the magnetic field is mathematically represented as
[tex]B = \frac{E}{c}[/tex]
Here c is the speed of light [tex]c = 3.0*10^{8} \ m/s[/tex]
=> [tex]B = \frac{E}{c}[/tex]
=> [tex]B = \frac{3.0*10^{3}}{ 3.0*10^{8}}[/tex]
=> [tex]B = 1.0*10^{-5} \ T[/tex]
What causes Ep to be converted to Ek? (giving brainliest to right anwser)
Answer:
Energy is a quantity that can be verticality from one to another,
sum of all the energy of the system remains constant if there is no friction force.
Explanation:
The potential energy of a system is a configuration energy, that is, for a given position the energy has a value with respect to a reference point.
Kinetic energy is an energy related to the movement of bodies, that is, a body must have a speed to have kinetic energy.
Energy is a quantity that can be verticality from one to another, the gravitational potential that a body has at a given height when the body is released accelerates by action of gravity, in this case the potential energy decreases and the scientific energy increases, It is appropriate to clarify that the sum of all the energy of the system remains constant if there is no friction force.
one newton equals 0.225
If you lie on the ground at night with no cover, you get cold rather quickly. Much of this is due to energy loss by radiation. At night in a dry climate, the temperature of the sky can drop to −40∘C. If you are lying on the ground with thin clothing that provides little insulation, the surface temperature of your skin and clothes will be about 30∘C. Estimate the net rate at which you body loses energy by radiation to the night sky under these conditions. Hint: What area should we use?
Answer:
301.48 J/s
Explanation:
We are given;
Temperature of the sky dropping to −40∘C: T_o = -40°C = -40 + 273 = 233 K
Temperature of your skin and clothes: T = 30°C = 30 + 273 = 303 K
Body surface area of human body is around 2 m². But here only half of the body is facing the sky, Thus Area is: A = 2/2 = 1 m²
To solve this, we will use the equation for thermal heat transfer known as the Stefan bolt Mann equation.
ΔQ/Δt = εσA(T⁴ - (T_o)⁴)
Where;
ΔQ/Δt is the rate at which you body loses energy by radiation
ε is the emissivity of the human body with a value of 0.97
σ is Stefan boltzmann constant with a value of 5.67 X 10^(-8) W/m².K⁴
Thus;
ΔQ/Δt = 0.97 × 5.67 X 10^(-8) × 1(303⁴ - 233⁴)
ΔQ/Δt = 301.48 J/s
Among the elements potassium, lithium, and iron, the metallic bonds are likely to be strongest in
彼が好きな男のような話は妻と関係があったのでそう
Explanation:これが難しい場合はコメントで教えてくださいが何でも
lol okay
from: a random person :)
Answer: Iron
Explanation: Gradpoint
Where do magnetic fields occur?
Answer:
The Magnetosphere and MagnetsExplanation:
[tex]--------------------------------------------[/tex]
According to the National Geographic, "Earth’s magnetic field dominates a region called the magnetosphere, which wraps around the planet and its atmosphere. Solar wind, charged particles from the sun, presses the magnetosphere against the Earth on the side facing the sun and stretches it into a teardrop shape on the shadow side. The magnetosphere protects the Earth from most of the particles, but some leak through it and become trapped. When particles from the solar wind hit atoms of gas in the upper atmosphere around the geomagnetic poles, they produce light displays called auroras. These auroras appear over places like Alaska, Canada and Scandinavia, where they are sometimes called “Northern Lights.” The “Southern Lights” can be seen in Antarctica and New Zealand. The magnetic field is the area around a magnet that has magnetic force. All magnets have north and south poles."
[tex]--------------------------------------------[/tex]
Hope this helps! <3
[tex]--------------------------------------------[/tex]
Two objects of equal mass are a distance of 5.0 m apart and attract each other with a gravitational force of 3.0 x 10^-7 N find their mass.
A) 150 kg
B) 9.8 kg
C) 11.000 kg
D) 340 kg
Answer
I Think Its 150
How much power is required to carry a 30 N package a vertical distance of 8 m if the work on the package is accomplished in 15 s?
58 W
630 W
21 W
16 W
Answer:
poop bear cookie
Explanation:
When you heat water on a stove, how does its energy change?
A. Its electromagnetic energy decreases.
B. Its thermal energy decreases. c. Its thermal energy increases.
D. Its electromagnetic energy increases.
Answer:
C. its thermal energy increases
Answer:
Explanation:
C
A disk with a rotational inertia of 2.0 kg m2 and a radius of 1.6 m is free to rotate about a frictionless axis perpendicular to the disk's face and passing through its center. A force of 5.0 N is applied tangentially to the rim of the disk. What is the angular acceleration of the disk as a result of this applied force?
a) 4.0 rad/s2
b) 1.0 rad/s2
c) 2.0 rad/s2
d) 0.40 rad/s2
e) 0.80 rad/s2
Answer:
a) 4.0 rad/s2
Explanation:
For rigid bodies, Newton's 2nd law becomes :τ = I * α (1)
where τ is the net external torque applied, I is the rotational inertia
of the body with respect to the axis of rotation, and α is the angular
acceleration caused by the torque.
At the same time, we can apply the definition of torque to the left side of (1), as follows:[tex]\tau = F*r*sin \theta (2)[/tex]
where τ = external net torque applied by Fnet, r is the distance
between the axis of rotation and the line of Fnet, and θ is the
angle between both vectors.
In this particular case, as Fnet is applied tangentially to the disk, Fnet
and r are perpendicular each other.
Since left sides of (1) and (2) are equal each other, right sides are equal too, so we can solve for the angular acceleration as follows:[tex]\alpha = \frac{F*r}{I} = \frac{5.0N*1.6m}{2.0 kg*m2} = 4.0 rad/s2 (3)[/tex]
What is the original source of the energy stored in fossil fuels?
plants
the Sun
air
O water
The sun
Answer:
Plants the chloroplasts
Please help It is Anatomy and Phys
Think about the last time you had your temperature taken. Describe the circumstances that led you to have your temperature taken, including the mechanism by which your temperature was measured (oral thermometer, ear thermometer, etc.), so that given the right equipment, you could demonstrate the technique yourself to another person. What would have been considered an abnormal temperature in that situation?
Answer:
the last time i had my tempature taken was at disney prings about a week ago -_- they used one of those gun things that dont touch u and the SHOVED me forward so i guess i was fine
Explanation:
Answer:
thermometer
Explanation:
. A horizontal steel spring has a spring constant of 40.0 N/m. What force must be applied to the spring in order to compress it by 10.0 cm?
Ans 4 more to be exact
Explanation:
Given values are:
Spring constant,
k = 40 N/mand,
x = 10 mThe force will be:
→ [tex]F = kx[/tex]
By substituting the values, we get
[tex]= 40\times 10[/tex]
[tex]= 400 \ N[/tex]
Thus the above answer is right.
Learn more about spring constant here:
https://brainly.com/question/15277652
What is the frequency of this wave?
can someone pls explain and answer
Answer:
f = 1 Hz
Explanation:
From the attached figure, we find that the time period of the wave is 1 second.
It is a longitudinal wave. It travel in the form of compression and rarefaction. The relation between time period T and frequency f is given by :
[tex]f=\dfrac{1}{T}\\\\\text{As T = 1 s}\\\\f=1\ s^{-1}\\\\=1\ Hz[/tex]
Hence, the frequency of this wave is 1 Hz.
According to the law of conservation of momentum, in an isolated system:
A. The initial and final velocities remain the same.
B. The total initial momentum is equal to the total final momentum.
C. One of the colliding objects must be at rest.
D. The final momentum is always less than the initial momentum.
Answer:
Explanation:B
Please help
1. Who was Ptolemy and Copernicus?
2. Describe their ideas about the planets and the sun
Answer:
1 +2=3 so thats it
Explanation:
Because i need points
name the force that help us to walk
The 20 oz orange soda you drank at lunch contained 1 oz. Of real orange juice. What percent of the orange soda is real orange juice?
What is the distance between a 900 kg compact car and a 1600 kg pickup truck if the gravitational force between them is about 0.0001 N?
Answer:
The distance is 0.96m
Explanation:
Given
m1= 900kg
m2= 1600kg
Force F= 0.0001nN
G=6.67430*10^-11 Nm^2/kg^2
Required
The distance r
Step two:
the formula for the force is given as
F = Gm1m2/r2
make r subject of the formula
[tex]r= \sqrt{\frac{Gm1m2}{F} }[/tex]
[tex]r= \sqrt{\frac{6.67430*10^-11*900*1600}{0.0001} }\\\\r= 0.00009610992/0.0001`}\\\\r= 0.96m[/tex]
Answer:
The distance is 0.96m
Explanation:
Given
m1= 900kg
m2= 1600kg
Force F= 0.0001nN
G=6.67430*10^-11 Nm^2/kg^2
Required:
The distance r
Step two:
the formula for the force is given as
F = Gm1m2/r2
make r subject of the formula
[tex]r= \sqrt{\frac{Gm1m2}{F} }[/tex]
[tex]r= \sqrt{\frac{6.67430*10^-11*900*1600}{0.0001} }\\\\r= 0.00009610992/0.0001`}\\\\r= 0.96m[/tex]
Answer:
The distance between the compact car and pickup truck is 0.96048 m
Explanation:
The gravitational force is directly proportional to the product of the masses of the interacting object, it is also inversely proportional to the square of the distance between them. This is shown in equation 1;
[tex]F =G \frac{m_{1} X m_{2} }{d^{2} }[/tex]............ 1
Where F is the gravitational force = 0.0001 N
G is the gravitational constant = 6.673 x [tex]10^{-11} Nm^{2} kg^{-2}[/tex]
[tex]m_{1}[/tex] is the mass of the compact car = 900kg
[tex]m_{2}[/tex] is the mass of the pickup truck = 1600kg
d is the distance and its unknown ?
Let us make d the subject formula in equation 1
[tex]d = \sqrt{G\frac{m_{1} m_{2} }{F } }[/tex] .... 2
Substituting into equation 2 we have
[tex]d = \sqrt{\frac{6.673x10^{-11} x 900 x 1600}{0.0001N} }[/tex]
d = 0.96048m
Therefore the distance between the compact car and pickup truck is 0.96048 m
E=6.63E-34J-s*4.6E14 hz
What would its weight be on Jupiter?
24.9N
Answer:
1.898 × 10^27 kg
Explanation:
thats how much it ways
a cannon has a mass 2500. it fires a cannon-Ball during a routine exercise. the cannon is 1000 times heavier than the cannon ball. the cannon ball leaves the barrel at a horizontal velocity of 160 m/s. the cannon comes to rest 2 seconds after the cannon ball was fired. calculate the magnitude of average net force that causes the cannon to rest
Answer:
F = 200 [N]
Explanation:
To solve this problem we must use the principle of conservation of linear momentum, which can be calculated by means of the following equation.
[tex]P=m*v[/tex]
where:
P = lineal momentum [kg*m/s]
m = mass [kg]
v = velocity [m/s]
Now we must understand that the momentum is conserved before and after the firing of the cannon. Before firing the cannon we have the mass of the cannon and mass of the cannonball together at rest (speed = 0). After firing the cannon the cannonball moves forward with positive speed, while the cannon moves back (negative), in this way knowing the masses of each one we can determine the speed of the cannon.
[tex](m_{cannon}+m_{ball})*v_{1}=-(m_{cannon}*v_{2})+(m_{ball}*v_{3})[/tex]
where:
m_cannon = 2500 [kg]
m_ball = 2.5 [kg]
v₁ = 0 (velocity of the group before firing)
v₂ = velocity of the cannon after firing [m/s]
v₃ = 160 [m/s] (velocity of the cannonball after firing)
[tex](2500+2.5)*0 = -(2500*v_{2})+(2.5*160)\\v_{2}=0.16[m/s][/tex]
Now using the following equation of kinematics, we can calculate the acceleration.
[tex]v_{f}=v_{o}-a*t[/tex]
where:
Vf = final velocity = 0 (cannon comes to rest)
Vo = initial velocity = 0.16 [m/s]
a = acceleration [m/s²]
t = time = 2 [s]
[tex]0 = 0.16 - a*2\\2*a=0.16\\a = 0.08 [m/s^{2}][/tex]
With the value of acceleration, we can use Newton's second law which tells us that the forces acting on a body is equal to the product of mass by acceleration.
ΣF = m*a
where:
F = force [N] (units of Newtons)
m = mass = 2500 [kg]
a = acceleration = 0.08 [m/s²]
[tex]F = 2500*0.08\\F = 200 [N][/tex]
When water freezes, its volume increases by 9.05% (that is, equation). What force per unit area is water capable of exerting on a container when it freezes?
Answer:
1.991 × 10^(8) N/m²
Explanation:
We are told that its volume increases by 9.05%.
Thus; (ΔV/V_o) = 9.05% = 0.0905
To find the force per unit area which is also pressure, we will use bulk modulus formula;
B = Δp(V_o/ΔV)
Making Δp the subject gives;
Δp = B(ΔV/V_o)
Now, B is bulk modulus of water with a value of 2.2 × 10^(9) N/m²
Thus;
Δp = 2.2 × 10^(9)[0.0905]
Δp = 1.991 × 10^(8) N/m²
A 2kg block has 70J of KE. It then travels 1.5 meters up a hill. As it travels up the hill friction does -12J of work on the block. What is the new speed of the block?
Please include an explanation.
Answer:
v = 5.34[m/s]
Explanation:
In order to solve this problem, we must use the theorem of work and energy conservation. This theorem tells us that the sum of the mechanical energy in the initial state plus the work on or performed by a body must be equal to the mechanical energy in the final state.
Mechanical energy is defined as the sum of energies, kinetic, potential, and elastic.
E₁ = mechanical energy at initial state [J]
[tex]E_{1}=E_{pot}+E_{kin}+E_{elas}\\[/tex]
In the initial state, we only have kinetic energy, potential energy is not had since the reference point is taken below 1.5[m], and the reference point is taken as potential energy equal to zero.
In the final state, you have kinetic energy and potential since the car has climbed 1.5[m] of the hill. Elastic energy is not available since there are no springs.
E₂ = mechanical energy at final state [J]
[tex]E_{2}=E_{kin}+E_{pot}[/tex]
Now we can use the first statement to get the first equation:
[tex]E_{1}+W_{1-2}=E_{2}[/tex]
where:
W₁₋₂ = work from the state 1 to 2.
[tex]E_{k}=\frac{1}{2} *m*v^{2} \\[/tex]
[tex]E_{pot}=m*g*h[/tex]
where:
h = elevation = 1.5 [m]
g = gravity acceleration = 9.81 [m/s²]
[tex]70 - 12 = \frac{1}{2}*2*v^{2}+2*9.81*1.5[/tex]
[tex]58 = v^{2} +29.43\\v^{2} =28.57\\v=\sqrt{28.57}\\v=5.34[m/s][/tex]