what is the equilibrium expression for the following reaction? h2so4 (l) ⇌ so3 (g) h2o (l)

Answers

Answer 1

The equilibrium expression for the following reaction? h2so4 (l) ⇌ so3 (g) h2o (l):  the final equilibrium expression for this reaction is: Kc = [SO3]

The equilibrium expression for the given reaction is:

Kc = [SO3][H2O] / [H2SO4]

where Kc is the equilibrium constant, [SO3], [H2O], and [H2SO4] are the molar concentrations of sulfur trioxide, water, and sulfuric acid respectively at equilibrium.
Hello! I'm happy to help with your question. The equilibrium expression for the reaction H2SO4 (l) ⇌ SO3 (g) + H2O (l) can be written using the equilibrium constant (Kc).

First, let's write the balanced chemical equation:
H2SO4 (l) ⇌ SO3 (g) + H2O (l)

Next, we'll write the equilibrium expression using the concentrations of the products and reactants:

Kc = [SO3] * [H2O] / [H2SO4]

In this expression, [SO3], [H2O], and [H2SO4] represent the equilibrium concentrations of the respective species. Keep in mind that only the concentrations of gases (SO3 in this case) are included in the equilibrium constant expression. Liquid concentrations, such as H2SO4 and H2O, do not affect the value of Kc.

So, the final equilibrium expression for this reaction is:

Kc = [SO3]

to learn more about equilibrium constant click here:

brainly.com/question/29359391

#SPJ11


Related Questions

a scientist prepares a solution by adding 300 ml of 0.03 m hcl(aq) to 500 ml of 0.02 m hclo4(aq). what is the ph of the resultant solutions at 25 ºC

Answers

The pH of the resultant solution at 25°C is approximately 1.62.

To find the pH of the resultant solution, we'll need to follow these steps:
1. Calculate the moles of HCl and HClO4 in the individual solutions:
- Moles of HCl = (Volume × Molarity) = (0.3 L × 0.03 M) = 0.009 mol
- Moles of HClO4 = (Volume × Molarity) = (0.5 L × 0.02 M) = 0.01 mol

2. Calculate the total volume of the mixture:
Total volume = 300 mL + 500 mL = 800 mL = 0.8 L

3. Calculate the combined moles of H+ ions:
Total moles of H+ ions = Moles of HCl + Moles of HClO4 = 0.009 mol + 0.01 mol = 0.019 mol

4. Calculate the concentration of H+ ions in the mixed solution:
[H+] = (Total moles of H+ ions) / (Total volume) = 0.019 mol / 0.8 L = 0.02375 M

5. Use the pH formula to find the pH of the solution at 25°C:
pH = -log10[H+] = -log10(0.02375) ≈ 1.62

To know more about Molarity refer to

https://brainly.com/question/30404105

#SPJ11

Individual nitrogen atoms are
paramagnetic
diamagetic
pseudomagnetic

Answers

Individual nitrogen atoms are paramagnetic.

Paramagnetism refers to the property of certain materials or atoms that are attracted to an external magnetic field. In the case of nitrogen atoms, they possess an unpaired electron in their 2p orbital, which makes them paramagnetic. Nitrogen has an electron configuration of 1s2 2s2 2p3, with three unpaired electrons in its 2p sublevel.

Unpaired electrons have a net spin, creating a magnetic moment. When an external magnetic field is applied, the unpaired electrons align with the field, resulting in a weak attraction. This property is characteristic of paramagnetic substances.

Diamagnetism, on the other hand, refers to the property of substances that are weakly repelled by magnetic fields due to the presence of paired electrons. Pseudomagnetism is not a recognized term in the context of magnetic properties.

In conclusion, individual nitrogen atoms are paramagnetic due to the presence of unpaired electrons in their electron configuration.

To learn more about nitrogen atoms click here

brainly.com/question/2396742

#SPJ11

Which of the following is accurate in terms of the relationship between the velocity of a reaction and the rate constant of a reaction? Choose one: A. For a first-order reaction, the rate constant of a reaction is equal to the product of the substrate concentration and the velocity of the reaction. B. For both first-order and second-order reactions, the concentration of substrate is equal to the product of the velocity of the reaction and the rate constant of the reaction. C. In a first-order reaction, the rate constant of a reaction is equal to the velocity of the reaction divided by the concentration of substrate. D. In a second-order reaction, the rate constant is equal to the velocity of the reaction multiplied by the concentration of both substrates.

Answers

The accurate relationship between the velocity of a reaction and the rate constant of a reaction depends on the type of reaction. For a first-order reaction, the rate constant is proportional to the velocity of the reaction, and independent of substrate concentration. Therefore, option C is correct.

In a first-order reaction, the rate constant of a reaction is equal to the velocity of the reaction divided by the concentration of substrate. This means that as the concentration of substrate decreases, the velocity of the reaction will decrease as well, but the rate constant will remain constant. For second-order reactions, the rate constant is equal to the velocity of the reaction divided by the concentration of both substrates. It is important to note that the relationship between velocity and rate constant can differ depending on the order of the reaction. For both first-order and second-order reactions, the concentration of substrate affects the velocity of the reaction, but the rate constant is specific to the reaction type and independent of substrate concentration.

Options A and B are therefore incorrect. Option D is also incorrect, as it pertains to a second-order reaction with multiple substrates, which is not specified in the question.

Learn more about the first-order reaction at https://brainly.com/question/518682

#SPJ11

Convert 2. 1 mole of Al2(SO4)3 ionic units to a number of particles. ​

Answers

We can estimate that 2.1 moles of Al2(SO4)3 comprise roughly 1.263 x 1024 particles of the material.

The quantity of a substance is frequently expressed in terms of moles. There are a lot of particles in one mole of any substance—roughly 6.02 x 1023 particles per mole.

If we multiply 2.1 moles of Al2(SO4)3 by Avogadro's number, we may translate it to the number of particles. The number of Al2(SO4)3 ions found in 2.1 moles of the compound, or 1.263 x 1024 particles, are obtained.

In conclusion, we can estimate that 2.1 moles of Al2(SO4)3 comprise roughly 1.263 x 1024 particles of the material.

Learn more about Al2(SO4)3:

https://brainly.com/question/20543705

#SPJ4

choose the phrase that best describes the relative acid strength of these acids. ch 4 nh 3 . hbr hcl .

Answers

The relative acid strengths of the given acids are: HCl > HBr > CH4 > NH3.

HCl and HBr are both strong acids due to their high level of dissociation in water, making them highly acidic. CH4 and NH3 are weak acids, with CH4 being weaker than NH3 due to the fact that methane (CH4) is a nonpolar molecule, whereas ammonia (NH3) is polar, allowing it to form stronger hydrogen bonds.

TO KNOW MORE ABOUT acid strengths  CLICK THIS LINK -

brainly.com/question/28208707

#SPJ11

a buret contains 0.0010 m hcl up to the 9.12 ml volume mark. at the end of a titration, the hcl was at the 22.77 ml mark. how many moles of hcl were dispensed during the titration?

Answers

During the titration, 1.365 x 10-5 moles of HCl were released. By reacting a sample with a drug whose concentration is known, titration is a laboratory technique used to measure the concentration of a material in a sample.

We must utilise the equation to solve this issue:

HCl concentration times HCl volume equals moles of HCl.

The amount of HCl that was dispensed during the titration must first be determined. This equates to:

Final volume minus beginning volume equals volume discharged.

dispensed volume = 22.77 mL - 9.12 mL

dispensed volume: 13.65 mL

The volume is then converted to litres:

volume dispensed is equal to 13.65 mL times (1 L/1000 mL)

volume delivered equals 0.01365 L

The moles of HCl discharged can now be calculated using the equation above:

HCl concentration times HCl volume equals moles of HCl.

1.365 x 10-5 moles of HCl are equal to 0.0010 M x 0.01365 L of HCl.

Learn more about titration here:

https://brainly.com/question/29491609

#SPJ11

The synthesis of sulfanilamide as described in the textbook begins with acetanilide (1), which is an amide: Yet; the final product has an amino group attached to the benzene ring. So the question becomes, (a) why not start the synthesis with aniline (3), which is already an amine?(b) Let's consider the reaction of (1) with chlorosulfonic acid in the first step of the synthesis outlined in question 1. The product is (2). But if we started the synthesis with (3), what would be the product of the reaction with chlorosulfonic acid? Write the equation showing how (3) would react with chlorosulfonic acid and what the product would be.

Answers

The reason why the synthesis of sulfanilamide starts with acetanilide instead of aniline is because acetanilide is more easily obtained and purified compared to aniline.

Acetanilide also has a lower tendency to undergo undesirable side reactions during the synthesis.

When aniline is reacted with chlorosulfonic acid, the amino group on the benzene ring reacts with the acid to form an ammonium ion. This ammonium ion then undergoes a nucleophilic substitution reaction with the chloride ion, resulting in the formation of p-chloroaniline. The reaction can be represented as:

C6H5NH2 + HClSO3 → C6H5NH3+ ClSO3^-

C6H5NH3+ ClSO3^- + H2O → C6H4ClNH2 + H2SO4

So if we started the synthesis with aniline instead of acetanilide, the product of the reaction with chlorosulfonic acid would be p-chloroaniline instead of p-chloroacetanilide.

Visit here to learn more about aniline brainly.com/question/31081529

#SPJ11

Use the reaction shown below to answer these questions. 2CO(g)+2NO(g)→N2(g)+2CO2(g)2CO(g)+2NO(g)→N2​(g)+2CO2​(g) a. What is the volume ratio of carbon monoxide to carbon dioxide in the balanced equation? b. If 42.7 g of CO is reacted completely at STP, what volume of N2N2​ gas will be produced?

Answers

a. The volume ratio of carbon monoxide to carbon dioxide in the balanced equation is 2:2, which can be simplified to 1:1. This means that for every one volume of CO gas that reacts, one volume of CO2 gas is produced.

b. To solve for the volume of N2 gas produced, we need to use the balanced equation to determine the stoichiometry of the reaction. From the equation, we can see that for every two volumes of CO gas that react, one volume of N2 gas is produced.

First, we need to convert the given mass of CO to moles using the molar mass of CO:

42.7 g CO x (1 mol CO/28.01 g CO) = 1.524 mol CO

Next, we can use the stoichiometry of the reaction to calculate the moles of N2 produced:

1.524 mol CO x (1 mol N2/2 mol CO) = 0.762 mol N2

Finally, we can use the ideal gas law to calculate the volume of N2 gas produced at STP (standard temperature and pressure, which is 0°C and 1 atm):

PV = nRT

(1 atm)(V) = (0.762 mol)(0.08206 L atm/mol K)(273 K)

V = (0.762 mol)(0.08206 L atm/mol K)(273 K)/(1 atm) = 17.6 L

Therefore, 42.7 g of CO will produce 17.6 L of N2 gas at STP.

To know more about stoichiometry, click here:-

https://brainly.com/question/29775083

#SPJ11

17.44 predict the product of the following reaction and propose a mechanism for its formation: na, ch3oh

Answers

In this reaction, sodium reacts with methanol to form sodium methoxide (NaOCH3) and hydrogen gas (H2).

Based on the given terms, it seems that you are looking for the product and mechanism of a reaction involving sodium (Na) and methanol (CH3OH).

In this reaction, sodium reacts with methanol to form sodium methoxide (NaOCH3) and hydrogen gas (H2). The reaction is as follows:

2Na + 2CH3OH → 2NaOCH3 + H2

The mechanism for this formation involves sodium donating an electron to methanol, causing the O-H bond in methanol to break. As a result, sodium bonds with the oxygen atom (forming NaOCH3) and hydrogen gas is released.

Know more about Methanol here:
https://brainly.com/question/3006705

#SPJ11

Determine the resulting pH when 0.003 mol of solid NaOH is added to a 100.0 mL buffer containing 0.13 M HClO and 0.37 M NaClO. The value of Ka for HClO is 2.9 × 10⁻⁸. Determine the moles of the ractant and product after the reaction of the acid and base.

Answers

The resulting pH after adding 0.003 mol of solid NaOH to a 100.0 mL buffer containing 0.13 M HClO and 0.37 M NaClO is 8.08.


1. Calculate moles of HClO and NaClO in the buffer:
  Moles HClO = 0.13 M × 0.100 L = 0.013 mol
  Moles NaClO = 0.37 M × 0.100 L = 0.037 mol

2. Find moles of HClO and NaClO after NaOH reacts with HClO:
  Moles HClO remaining = 0.013 mol - 0.003 mol = 0.010 mol
  Moles NaClO produced = 0.037 mol + 0.003 mol = 0.040 mol

3. Calculate the concentrations of HClO and NaClO after the reaction:
  [HClO] = 0.010 mol / 0.100 L = 0.10 M
  [NaClO] = 0.040 mol / 0.100 L = 0.40 M

4. Use the Henderson-Hasselbalch equation to find the pH:
  pH = pKa + log ([NaClO] / [HClO])
  pKa = -log(2.9 × 10⁻⁸) = 7.54
  pH = 7.54 + log (0.40 / 0.10) = 8.08

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

Determine the following direct products and decompose any reducible representations to the sum of irreducible representations: (a)A2×B2inC4v(b) B2u×B1g in D4h

Answers

A2×B2 in C4v, the direct product has one-dimensional irreducible representations labeled by the characters E and C2, and a reducible two-dimensional representation labeled by the character E+C2. aND B2u×B1g in D4h, the direct product has one-dimensional irreducible representations labeled by the characters A1, B1, B2, and A2, and a reducible four-dimensional representation labeled by the characters 2C2, σu+σg, and 2σd.

For part (a), A2×B2 in C4v, we first need to determine the irreducible representations for A2 and B2. A2 has one-dimensional irreducible representations labeled by the characters E and C2, while B2 has two-dimensional irreducible representations labeled by the characters E, C2, and 2C3.

Using the direct product rule, we can determine the irreducible representations for A2×B2 by multiplying the characters for each factor. We get:

E×E = E
E×C2 = C2
C2×E = C2
C2×C2 = E+C2

Therefore, the direct product A2×B2 in C4v has one-dimensional irreducible representations labeled by the characters E and C2, and a reducible two-dimensional representation labeled by the character E+C2. To decompose this reducible representation into irreducible representations, we need to use character tables or projection operators.

For part (b), B2u×B1g in D4h, we need to determine the irreducible representations for B2u and B1g. B2u has two-dimensional irreducible representations labeled by the characters E, C2, σu, and σg, while B1g has one-dimensional irreducible representations labeled by the character C2.

Using the direct product rule, we can determine the irreducible representations for B2u×B1g by multiplying the characters for each factor. We get:

E×C2 = C2
C2×C2 = A1+ B1+ B2+ A2
σu×C2 = σg
σg×C2 = σu

Therefore, the direct product B2u×B1g in D4h has one-dimensional irreducible representations labeled by the characters A1, B1, B2, and A2, and a reducible four-dimensional representation labeled by the characters 2C2, σu+σg, and 2σd. To decompose this reducible representation into irreducible representations, we need to use character tables or projection operators.

Know more about Dimension here:

https://brainly.com/question/8932120

#SPJ11

What is the difference between odichlorobenzene and p dichlorobenzene

Answers

Dichlorobenzene and p-dichlorobenzene are two different compounds that belong to the family of chlorobenzenes. The main difference between the two is the position of the two chlorine atoms on the benzene ring.

In dichlorobenzene, the two chlorine atoms are located on adjacent carbon atoms, while in p-dichlorobenzene, they are located on opposite sides of the ring, on the 1,4 positions. This structural difference between dichlorobenzene and p-dichlorobenzene affects their physical and chemical properties. For example, p-dichlorobenzene has a higher boiling point and is more stable than dichlorobenzene. Additionally, p-dichlorobenzene is commonly used as a moth repellent and air freshener, while dichlorobenzene is mainly used in the production of other chemicals.

Both compounds are toxic and can cause harm to human health and the environment. However, p-dichlorobenzene is considered to be less harmful than dichlorobenzene due to its lower volatility and slower release into the atmosphere.

In summary, the main difference between dichlorobenzene and p-dichlorobenzene is the position of the two chlorine atoms on the benzene ring. This difference affects their properties and uses, and highlights the importance of understanding the molecular structure of chemicals and their potential impact on human health and the environment.

Learn more about compounds here:

brainly.com/question/29588489

#SPJ11

explain why hc--ch is more acidic than ch3ch3, even though the c-h bond in hc-ch has a higher bond dissociation energy than the ch bond in ch3ch3

Answers

HC≡CH (ethyne) is more acidic than CH3CH3 (ethane) because of the difference in hybridization and electronegativity between their carbon atoms.

In HC≡CH, the carbon atoms are sp-hybridized, which have a higher s-character (50%) than the sp3-hybridized carbon atoms in CH3CH3 (25%). The reason why HC--CH is more acidic than CH3CH3 is due to the stability of the resulting carbocation after protonation.

HC--CH has a triple bond, which means that the electrons are more tightly held and closer to the carbon atoms, making them more easily removed by an acid. This results in a more stable carbocation intermediate. On the other hand, CH3CH3 has only single bonds, which means that the electrons are further away and less easily removed, resulting in a less stable carbocation intermediate.

Despite the fact that the C-H bond in HC--CH has a higher bond dissociation energy than the C-H bond in CH3CH3, the stability of the resulting carbocation makes HC--CH more acidic.

To learn more about carbon atoms click here

brainly.com/question/30507533

#SPJ11

define the "common ion effect." if outside sources are consulted (such as a textbook, etc.), be sure to cite where the information was obtained.

Answers

The common ion effect is a phenomenon in which the presence of an ion in a solution decreases the solubility of a compound that contains that ion.

What is Common Ion Effect?

The common ion effect occurs when a weak electrolyte is combined with a strong electrolyte containing a common ion, resulting in a decrease in the solubility of the weak electrolyte due to the presence of the common ion. This phenomenon is an application of Le Chatelier's principle, which states that a system at equilibrium will shift to counteract any changes applied to it.

For example, if a solution of sodium chloride is mixed with hydrochloric acid, the concentration of chloride ions will increase due to the dissociation of HCl. As a result, the solubility of NaCl in the solution will decrease due to the common ion effect.

To know more about Common Ion Effect:

https://brainly.com/question/30772969

#SPJ11

Classify each of the following diatomic molecules as polar or nonpolar. Drag the appropriate items to their respective bins. Reset Help CO F2 HBr O, 7 Polar Nonpolar Classify each of the following diatomic molecules as polar or nonpolar. Drag the items into the appropriate bins. Reset Help N, 12 HCI NO Polar Nonpolar

Answers

The molecules can be classifed as, Polar: HCl, NO, CO, HBr, O Nonpolar: F₂.

Polarity in a molecule refers to the separation of electric charge caused by differences in electronegativity between atoms. In a diatomic molecule, if the two atoms have the same electronegativity, they will share electrons equally and the molecule will be nonpolar.

However, if the atoms have different electronegativities, the electrons will be more attracted to the more electronegative atom, causing a partial negative charge on that atom and a partial positive charge on the other atom. This creates a dipole moment and makes the molecule polar. HCl, NO, CO, HBr, and O are all polar because of the differences in electronegativity between their constituent atoms, while F₂ is nonpolar because the two atoms have the same electronegativity.

To know more about polar molecules, here

brainly.com/question/31023968

#SPJ4

--The complete question is, Classify each of the following diatomic molecules as polar or nonpolar. Drag the appropriate items to their respective bins. Classify each of the following diatomic molecules as polar or nonpolar.

HCI

NO

CO

F2

HBr

O--

At 50°C the value of Kw is 5.5 x 10-14. An acidic solution at 50°C has. A) [H3O+] < 2.3 x 10-7M< [OH] • B) [H30+1 = [OH] < 2.3 x 10-7M. C) [H3O+] < [OH] < 2.3 x 10-7M. D) [OH] < 2.3 x 10-7M< < [H3O+]

Answers

Option D - [OH⁻] < 2.3 x 10⁻⁷M < [H3O⁺]. At 50°C the value of Kw is 5.5 x 10-14. An acidic solution at 50°C has [OH⁻] < 2.3 x 10⁻⁷M < [H3O⁺].

At 50°C, Kw (the ion product constant for water) is 5.5 x 10⁻¹⁴. This means that [H3O⁺][OH⁻] = 5.5 x 10⁻¹⁴.

In an acidic solution, [H3O⁺] is greater than [OH⁻]. So, we know that [H3O⁺] > [OH⁻] in this scenario.

Using the Kw expression, we can rearrange to solve for [OH⁻].

[H3O⁺][OH⁻] = 5.5 x 10⁻¹⁴

[OH⁻] = 5.5 x 10⁻¹⁴ / [H3O⁺]

Since [H3O⁺] is greater than [OH⁻], we can substitute in the smallest possible value for [H3O⁺], which is 2.3 x 10⁻⁷M (given in the answer choices).

[OH-] = 5.5 x 10⁻¹⁴ / 2.3 x 10⁻⁷M

[OH-] = 2.39 x 10⁻⁸M

Therefore, the answer is D) [OH⁻] < 2.3 x 10⁻⁷M < [H3O⁺].

Know more about ion product constant for water - brainly.com/question/9876097

#SPJ11

estimate the freezing point of 200 cm3 of water sweetened by the addition of 2.5 g of sucrose. treat the solution as ideal.

Answers

The solution's freezing point is approximately 0.0678 °C lower than that of pure water.

The freezing point is what?

The temperature at which a liquid, under atmospheric pressure, transitions from a liquid to a solid is known as the freezing point. Both the solid and liquid states coexist at the freezing point because these two phases, liquid and solid, are in equilibrium there.

We can use the formula:

ΔT_f = K_f * m

ΔT_f = freezing point depression

K_f = freezing point depression constant for the solvent

m = molality of the solution

The molar mass of sucrose = 342.3 g/mol,

Therefore, 2.5 g of sucrose is:

n = m/M = 2.5 g / 342.3 g/mol = 0.007305 mol

The mass of 200 cm^3 of water is:

m_water = density_water * V_water = (1 g/cm^3) * (200 cm^3) = 200 g

So the molality,

m = n_sucrose / m_water = 0.007305 mol / 0.2 kg = 0.0365 mol/kg

The freezing point depression constant for water = 1.86 K/m,

ΔT_f = K_f * m = 1.86 K/m * 0.0365 mol/kg = 0.0678 K

So,

T_f = 0°C - ΔT_f = 0°C - 0.0678 K = -0.0678°C

To know more about the freezing point visit:

https://brainly.com/question/31440246

#SPJ1

Fill in the left side of this equilibrium constant equation for the reaction of 4 - bromoaniline (C6H4BrNH2), a weak base, with water.

Answers

The equation for the reaction of 4-bromoaniline with water can be written as follows: C₆H₄BrNH₂ + H₂O ⇌ C₆H₄BrNH₃ + OH⁻

To fill in the left side of the equation, we need to think about what products might form when 4-bromoaniline reacts with water. Since 4-bromoaniline is a weak base, it can accept a proton (H⁺) from water to form its conjugate acid, which would be the product on the left side of the equation. So, we can write the equation like this:

C₆H₄BrNH₂ + H₂O ⇌ C₆H₄BrNH₃ + OH⁻

In words, this equation represents the reaction of 4-bromoaniline with water to form its conjugate acid (C₆H₄BrNH₃⁺) and hydroxide ions (OH⁻). The equilibrium constant (K) for this reaction can be calculated by dividing the concentration of the products (C₆H₄BrNH₃⁺ and OH⁻) by the concentration of the reactants (4-bromoaniline and water) at equilibrium.

Learn more about conjugate acid at https://brainly.com/question/12584785

#SPj11

Does a reaction occur when aqueous solutions of sodium hydroxide and manganese(II) sulfate are combined? yes no If a reaction does occur, write the net ionic equation. Use the solubility rules provided in the OWL Preparation Page to determine the solubility of compounds. Use the pull-down boxes to specify states such as (aq) or (s). If a box is not needed leave it blank.

Answers

Yes, a reaction occurs when aqueous solutions of sodium hydroxide and manganese(II) sulfate are combined.

Mn²⁺(aq) + 2OH⁻(aq) → Mn(OH)₂(s)
This is the net ionic equation for the reaction between aqueous solutions of sodium hydroxide and manganese(II) sulfate.

This reaction is a double displacement reaction, which results in the formation of manganese(II) hydroxide and sodium sulfate.
Here's the balanced chemical equation:
MnSO₄(aq) + 2NaOH(aq) → Mn(OH)₂(s) + Na₂SO₄(aq)
Now, let's write the net ionic equation:
Mn²⁺(aq) + SO₄²⁻(aq) + 2Na⁺(aq) + 2OH⁻(aq) → Mn(OH)₂(s) + 2Na⁺(aq) + SO₄²⁻(aq)
As sodium ions and sulfate ions do not participate in the reaction, we can exclude them as spectator ions:
Mn²⁺(aq) + 2OH⁻(aq) → Mn(OH)₂(s)

Learn more about sodium ions Refer: https://brainly.com/question/29704319

#SPJ11



200. ml of 2.50 m h2so4 is added to 300. ml of 4.00 m h2so4. assuming that the volumes are additive, the final concentration is __.

Answers

Using the formula: (2.50 M × 200 mL + 4.00 M × 300 mL) / (200 mL + 300 mL) = (500 + 1200) / 500 = 1700 / 500 = 3.40 M So, the final concentration of H2SO4 after the solutions are added is 3.40 M.

To find the final concentration, we need to first calculate the total moles of H2SO4 present after the two solutions are added.

Moles of H2SO4 in 200 ml of 2.50 M H2SO4 = (200/1000) x 2.50 = 0.5 moles
Moles of H2SO4 in 300 ml of 4.00 M H2SO4 = (300/1000) x 4.00 = 1.2 moles

Total moles of H2SO4 = 0.5 + 1.2 = 1.7 moles

Now, we need to calculate the final volume of the solution:

Final volume = 200 ml + 300 ml = 500 ml

Finally, we can calculate the final concentration:

Final concentration = Total moles of H2SO4 / Final volume
Final concentration = 1.7 moles / (500/1000) L
Final concentration = 3.4 M

Therefore, the final concentration is 3.4 M (sulfuric acid).

Learn more about concentration  here:

https://brainly.com/question/10725862

#SPJ11

what likely happened if you didn't recover any crystals after the recrystallization and where did the missing compound go? what could you do if this occurs?

Answers

If you didn't recover any crystals after recrystallization, it's likely that the compound either remained dissolved in the solvent or was lost during the process. To address this issue, you could try using a different solvent, adjusting the cooling rate, or using a smaller volume of solvent.

In recrystallization, a compound is dissolved in a solvent at a high temperature, and then the solution is allowed to cool. As the solution cools, the solubility of the compound decreases, causing it to form crystals. If no crystals are recovered, it's possible that the compound remained dissolved due to an inappropriate solvent choice or an excess of solvent, preventing proper crystal formation. Another possibility is that the compound was lost during the process, such as during filtration or transfer steps.
If this issue occurs, you could try using a different solvent with better solubility properties for the compound or using a smaller volume of solvent to increase the concentration of the compound and promote crystal formation. Additionally, adjusting the cooling rate (slow cooling might help in forming crystals) or using a better filtration method can help prevent the loss of the compound during the process.

Learn more about recrystallization here:

https://brainly.com/question/29215760

#SPJ11

. recall the experiment you did in the first general chemistry lab. how did we measure the heat of a reaction?

Answers

In the first general chemistry lab, we measured the heat of a reaction using a device called a calorimeter. The calorimeter is designed to isolate the reaction from the surrounding environment, so that the heat generated or absorbed by the reaction can be accurately measured.

To measure the heat of a reaction, we first placed a known amount of water in the calorimeter and recorded its initial temperature. Next, we added the reactants to the calorimeter and stirred the mixture until the reaction was complete. Finally, we recorded the final temperature of the water in the calorimeter. By measuring the change in temperature of the water, we were able to calculate the heat of the reaction using the formula Q = mcΔT, where Q is the heat absorbed or released by the reaction, m is the mass of the water in the calorimeter, c is the specific heat capacity of water, and ΔT is the change in temperature of the water.

To learn more about calorimeter visit;

https://brainly.com/question/4802333

#SPJ11

carvone is the major constituent of spearmint oil. draw the major organic product of the reaction of carvone with lialh4, then h3o .

Answers

The major organic product of this reaction is (1R,2S,5R)-2-methyl-5-(propan-2-yl)cyclohexan-1-ol, also known as spearmint alcohol.

When carvone is treated with LiAlH4 followed by H3O+, it undergoes reduction followed by hydrolysis to form a secondary alcohol.

The reaction mechanism is as follows:

Step 1: Reduction of carbonyl group to alcohol using LiAlH4

Step 2: Protonation of the intermediate using H3O+

The final product has the same molecular formula as carvone but differs in its functional group, with a secondary alcohol replacing the carbonyl group.

LiAlH4 (lithium aluminum hydride) is a powerful reducing agent that can reduce a variety of functional groups, including carbonyl groups (such as those found in aldehydes, ketones, and carboxylic acids) to form alcohols. In this case, the carbonyl group of carvone is reduced to an alcohol.

The reduction of the carbonyl group by LiAlH4 is an example of a nucleophilic addition reaction. The hydride ion (H-) from LiAlH4 acts as a nucleophile, attacking the carbonyl carbon and forming a new bond with it. This leads to the formation of an intermediate alkoxide ion, which is then protonated by H3O+ to form the final alcohol product.

learn more about Hydrolysis here:

https://brainly.com/question/12237250

#SPJ11

The Ksp of iron(II) carbonate, FeCO3, is 3.13 � 10-11. Calculate the solubility of this compound in g/L.
Please show work

Answers

The Ksp of iron(II) carbonate,[tex]FeCO_{3}[/tex], is 3.13,then the solubility of [tex]FeCO_{3}[/tex]in g/L is  6.47 x [tex]10^{-4}[/tex] g/L.

To calculate the solubility of ,[tex]FeCO_{3}[/tex]in g/L, we need to use the Ksp expression, which is:
Ksp = [Fe2+][[tex]CO_{3}[/tex]2-]
Where [Fe2+] is the molar concentration of Fe2+ ions and [[tex]CO_{3} 2-[/tex] -] is the molar concentration of [tex]CO_{3} 2-[/tex] - ions in the solution.
Since ,[tex]FeCO_{3}[/tex]is a sparingly soluble compound, we can assume that the concentration of Fe2+ and [tex]CO_{3} 2-[/tex] ions in the solution is equal to the amount of ,[tex]FeCO_{3}[/tex]that dissolves. Therefore, we can write:
Ksp = [Fe2+][[tex]CO_{3} 2-[/tex] -] = s x s
Where s is the solubility of ,[tex]FeCO_{3}[/tex]in mol/L.
Now, we can solve for s:
s = sqrt(Ksp) = sqrt(3.13 x[tex]10^{-11}[/tex]) = 5.59 x [tex]10^{-6}[/tex] g/L mol/L
Finally, we can convert the solubility from mol/L to g/L using the molar mass of ,[tex]FeCO_{3}[/tex]:
Molar mass of ,[tex]FeCO_{3}[/tex]= 56.85 g/mol + 12.01 g/mol + 3 x 16.00 g/mol = 115.85 g/mol
Therefore, the solubility of ,[tex]FeCO_{3}[/tex]in g/L is:
s(g/L) = s(mol/L) x Molar mass = 5.59 x [tex]10^{-6}[/tex]mol/L x 115.85 g/mol = 6.47 x [tex]10^{-4}[/tex] g/L
So, The Ksp of iron(II) carbonate, ,[tex]FeCO_{3}[/tex], is 3.13,then the solubility of ,[tex]FeCO_{3}[/tex]in g/L is  6.47 x [tex]10^{-4}[/tex] g/L

learn more about carbonate here

https://brainly.com/question/22530423

#SPJ11

what characteristics should a good sample for melting point determination have? select one or more:a) thoroughly dry b) solid phase c) small particlesd) large clumps e) liquid phase

Answers

The right response is solid phase (option b). A solid phase sample that is completely dry and free of moisture is ideal for melting point analysis.

What qualities should a good sample have in order to determine its melting point?

A melting point analysis capillary tube, which is just a glass capillary tube with one open end, should then be filled with the dry sample. A sample size of just 1 to 3 mm is sufficient for analysis.

What aspects of a material can change its melting point?

Pressure: Increasing pressure lowers the melting point of compounds that shrink upon melting whereas increasing pressure raises it for compounds that expand upon melting.

To know more about melting point visit:-

https://brainly.com/question/29578567

#SPJ1

What is the minimum amount of 6.0 M H2SO4 necessary to produce 25.0 g of H2 (g) according to the reaction between aluminum and sulfuric acid?
2 Al(s) + 3 H2SO4(aq)-> Al2(SO4)3(aq) + 3 H2(g)

Answers

The minimum amount of 6.0 M H2SO4 necessary to produce 25.0 g of H2 is approximately 2.06 liters.

To find the minimum amount of 6.0 M H2SO4 necessary to produce 25.0 g of H2, we can use stoichiometry.

First, convert the mass of H2 to moles:
25.0 g H2 * (1 mol H2 / 2.02 g H2) ≈ 12.38 mol H2

Now, use the balanced chemical equation to find the moles of H2SO4 required:
12.38 mol H2 * (3 mol H2SO4 / 3 mol H2) = 12.38 mol H2SO4

Finally, use the molarity of H2SO4 to find the volume needed:
12.38 mol H2SO4 * (1 L / 6.0 mol H2SO4) ≈ 2.06 L

So, the minimum amount of 6.0 M H2SO4 necessary to produce 25.0 g of H2 is approximately 2.06 liters.

Know more about Molarity here:

https://brainly.com/question/8732513

#SPJ11

the ph of pure water at 10°c is 7.27. what is the value of kw at 10°c?

Answers

The value of Kw at 10°C is Kw = [H+][OH-] = 10^-7.27 x Kw / 10^-7.27, which simplifies to Kw = 1.0 x 10^-14. The value of Kw, also known as the ion product constant of water, is the equilibrium constant for the reaction in which water molecules ionize into hydronium ions (H3O+) and hydroxide ions (OH-) in aqueous solution.

The value of Kw at 10°C can be calculated using the formula Kw = [H+][OH-]. Since pure water has a pH of 7.27 at 10°C, we can determine the concentration of H+ ions using the formula pH = -log[H+]. Therefore, [H+] = 10^-7.27.
To find the concentration of OH- ions, we can use the equation Kw = [H+][OH-]. Substituting the value of [H+], we get Kw = 10^-7.27 x [OH-]. Solving for [OH-], we get [OH-] = Kw / 10^-7.27. Kw plays an important role in the chemistry of aqueous solutions, as it helps determine the acidity or basicity of a solution through the calculation of pH. For example, if the concentration of hydronium ions in a solution is greater than the concentration of hydroxide ions, the solution is acidic and the pH will be less than 7. On the other hand, if the concentration of hydroxide ions is greater than the concentration of hydronium ions, the solution is basic and the pH will be greater than 7.

Learn more about The value of Kw here:

https://brainly.com/question/31328202

#SPJ11

If the ratio of the rate of diffusion of two gases is 1:3, then what is the ratio of the molecular weight?

Answers

The ratio of the molecular weights of the two gases is 1:9, which can be determined using Graham's law of effusion/diffusion, where the rate of diffusion is inversely proportional to the square root of molecular weight.

According to Graham's law of diffusion, the rate of diffusion of a gas is inversely proportional to the square root of its molecular weight. Therefore, if the ratio of the rate of diffusion of two gases is 1:3, then the ratio of the square roots of their molecular weights will also be 1:3. This means that the ratio of their molecular weights will be the square of this ratio, which is 1:9. So, the molecular weight of the heavier gas will be nine times that of the lighter gas. This relationship is important in various applications, such as in the separation of gases in industry and in understanding the diffusion of gases in the atmosphere.

Learn more about molecular weight here:

https://brainly.com/question/27988184

#SPJ11

For the reaction H2(g) + I2(g) -> 2HI(g) , K = 57.0 at 700K what can be said about this reaction at this temperature? what can be said about this reaction at this temperature? For the reactionwhat can be said about this reaction at this temperature? The equilibrium lies far to the right. The reaction will proceed very slowly. The reaction contains significant amounts of products and reactants at equilibrium. The equilibrium lies far to the left.

Answers

For the reaction [tex]H_{2}[/tex] (g) + [tex]I_{2}[/tex] (g) -> 2HI(g) at 700K with K = 57.0, it can be said that the equilibrium lies far to the right.

What happens at equilibrium for a reaction?

Based on the given equilibrium constant (K = 57.0) for the reaction [tex]H_{2}[/tex] (g) + [tex]I_{2}[/tex] (g) -> 2HI(g) at 700K, it can be inferred that the equilibrium lies far to the right, meaning the formation of HI (hydrogen iodide) is favored at this temperature. This is because a large value of K indicates that the reaction favors the formation of products. Therefore, at this temperature, the reaction contains significant amounts of products and a smaller amount of reactants at equilibrium.

Also, at 700K, the forward reaction (formation of 2HI from [tex]H_{2}[/tex] and [tex]I_{2}[/tex] ) is highly favored over the reverse reaction (formation of [tex]H_{2}[/tex]  and [tex]I_{2}[/tex]  from 2HI). As a result, significant amounts of products (2HI) are formed, while the concentrations of reactants are relatively low at equilibrium.

To know more about Equilibrium:

https://brainly.com/question/6659238

#SPJ11

For the reaction [tex]H_{2}[/tex] (g) + [tex]I_{2}[/tex] (g) -> 2HI(g) at 700K with K = 57.0, it can be said that the equilibrium lies far to the right.

What happens at equilibrium for a reaction?

Based on the given equilibrium constant (K = 57.0) for the reaction [tex]H_{2}[/tex] (g) + [tex]I_{2}[/tex] (g) -> 2HI(g) at 700K, it can be inferred that the equilibrium lies far to the right, meaning the formation of HI (hydrogen iodide) is favored at this temperature. This is because a large value of K indicates that the reaction favors the formation of products. Therefore, at this temperature, the reaction contains significant amounts of products and a smaller amount of reactants at equilibrium.

Also, at 700K, the forward reaction (formation of 2HI from [tex]H_{2}[/tex] and [tex]I_{2}[/tex] ) is highly favored over the reverse reaction (formation of [tex]H_{2}[/tex]  and [tex]I_{2}[/tex]  from 2HI). As a result, significant amounts of products (2HI) are formed, while the concentrations of reactants are relatively low at equilibrium.

To know more about Equilibrium:

https://brainly.com/question/6659238

#SPJ11

at 375 k the decomposition of copper oxide

Answers

At 375 K, copper oxide undergoes decomposition. This means that it breaks down into its constituent elements, copper and oxygen.

The decomposition reaction of copper oxide can be represented as:  2CuO → 2Cu + O2, This reaction requires energy to occur, and at 375 K the thermal energy is sufficient to overcome the activation energy needed for the reaction to take place. As a result, the copper oxide decomposes into copper and oxygen gas.


At 375 K, the decomposition of copper oxide occurs. Copper oxide is a compound made of copper and oxygen. During decomposition, the copper oxide breaks down into its constituent elements, releasing copper and oxygen gas.

To know more about reaction click here

brainly.com/question/30564957

#SPJ11

Other Questions
Derive the expectation of Y = ax^2 + bX + c. Show all steps of your work. Use the fact thatE[g(x)] = g (X) p (X=x) the term disintermediation refers to the policy of regulating the minimum rate of return institutions can pay on deposits. the policy of not closing insolvent institutions in hopes that they can eventually turn around their performance. the withdrawal of deposits from depository institutions that are reinvested in other types of intermediaries. chartering restrictions that limit the ability of new banks to enter into a local market. Calculate the molar solubility and the solubility in g/L of each salt at 25oC:a) PbF2 Ksp = 4.0 x 10^-8b) Ag2CO3 Ksp = 8.1 x 10^-12c) Bi2S3 Ksp = 1.6 x 10^-72 Parking lots A and B charge a set fee. A charges 36.50 for 5 hours. B charges 38.00 for 5 hours. Lot A charges 49.50 for 7 hours and lot B charges 50.00 for 7 hours. How many hours are needed to park where it would cost the same? Laughing gas is an oxide of nitrogen used as a propellant for whipped cream aerosols and also an inhalation anesthic and analgesic. Find the formula for laughing gas if it contains 63.65% N and has a density of 1.8g/L at 25 Celsius and 1atm John Maynard Keynes proposed that the multiplier effect can correct an economic depression. Based on this theory, an increase in equilibrium output would be created by an initiala. increase in investment.b. increase in government spending.c. decrease in government spending.d. Both answers a. and b. are correct.e. Both answers a. and c. are correct. Explain what is the assessment used for promotional purposes (summative)? phonics grade 1 lesson plan debbie's bakery has a plan for a 50 ft by 31 ft parking lot. the four parking spaces are congruent parallelograms, the driving region is a rectangle and the two unpaved areas for flowers are congruent triangles.a) find the area of the surface to be paved by adding the areas of the driving region and the four parking spaces. b) find the toal area of the flower gardens. if two air parcels at sea level have the ____, the colder parcel of air will have a lower pressure but the same density as the warm parcel. A resident is on a 1650 mL. fluid restriction each day. This is equivalent to how many ounces ? the ______ approach compares the percentage of minority/protected group and white workers in the organization with the percentage of corresponding groups in the labor market. Directions: Read the scenario below and solve. Show yourwork.If given x > 0 and y> 0, in which quadrant or axis will eachordered pair described below lie? Explain your answer.a. (-x, y)b. (-x, 0)c. (x, -y)d. (0. y) What type of variable is a in : a=x/4 (in C++ programming language?) Polymerization of actin in vitro illustrates several import properties of the polymerization process that occurs in cells. Which of the following is NOT true about G-actin monomer polymerization into F-actin filaments in vitro?During the steady state phase, the total amount of F-actin does not change, but G-actins continue to add to and dissociate from both ends.During the elongation phase, G-actin monomers add only to the (+) end of each actin filament.During the steady state phase, actin is at a specific concentration, known as the critical concentration, and is always disassembled in the G-actin form despite continual addition and loss of actin monomers at both ends of each actin filament.The critical concentration is the G-actin concentration at which the rate of addition is equal to the rate of loss of subunits from one end of the actin filament. Malnutrition adversely affects clinical outcomes of critically ill patients in what ways? Select ALL that apply. a. Depression b. Impaired immunity c. Muscle atrophy d. Altered cognition Cassie uses 1 quart cranberry juice, 1/2 gallon ginger ale, and 1 1/2 pint orange juice to make friut punch .How many 6- ounce servings can she make How many liter of CO2 gas at STP will contain 2136 molecules? how many grams of silver metal are produced from ag(aq) in 1.25 h with a current of 3.50 a? (f = 96,500 c/mol) what are some potential errors associated with this experiment? how can these errors affect the results obtained, and how can these errors be prevented in the future?