When there is a power outage, people and companies utilize generators to supply electricity. Since gasoline has the lowest specific heat, it requires the least amount of energy.
What does the term "electrical power" mean?Voltage, or the potential of a charge to produce energy, and current, or the flow of electric charge, are the two main components of electric power. Any ratio of current and voltage values can provide a given amount of power.
Given that it is created by electrical means, electricity qualifies as a power. It can be referred to as "electric power" in that meaning.
What kind of unit is electricity?Watts
Electrical power is measured in Watts and Kilowatts. James Watt, the creator of the steam engine, was honored with the designation Watts, which are units used to measure the power of electricity. One Watt electrical power measured in units of one amp at one volt of pressure.
To know more about electrical power visit:-
https://brainly.com/question/27442707
#SPJ1
Units and magnitudes 1. Make the following transformations 500 cm to m:
Answer:
5 m
500 cm to m is 5 meters
To convert one length to another, a conversion is applied, but first we will propose some data to serve us when applying the conversation.
Data:
100 cm is the same as a meter.& 1 meter is the same as 100 cm.Now, we convert centimeters to meters.
Conversion:
500cm • (1m / 100cm)5mExplanation:
They are 5 meters because multiplying 500 by 1 will give you the same result of 500, then we divide the 500 with the last amount that we have left, which is 100, thus giving us a result of 5 meters.
Which quantities (initial horizontal speed, initial vertical speed, range, flight time, or maximum height) varies linearly with the initial velocity?
Initial horizontal speed and flight time of a projectile are proportional to of the initial velocity.
What is projectile motion?A projectile is any object that is sent into space with only gravity acting on it. The primary force affecting a projectile is gravity.
This doesn't mean that other forces don't have an impact; it just means that they have a much smaller one compared to gravity. The trajectory of a projectile is the path it takes after being fired. The projectile is something that is batted or hurled, similar to a baseball.
Initial horizontal speed projectile= u
flight time of a projectile = 2usinθ/g.
So, these two quantities of projectile motion are proportional to the initial velocity.
Learn more about projectile motion here:
brainly.com/question/11261462
#SPJ1
Calculate the change in kinetic energy of a ball of mass 200 g when it bounces. Assume that it hits the ground with a speed of 15.8 m/s and leaves it at 12.2 m/s.
Answer: So, the kinetic energy of the ball is 0.02 J
Explanation:
The unbalanced force on the miners elevator is 60.0 N and the mass of the loaded elevator is 150 kg what is the acceleration of the elevator down the shaft
Answer:
Explanation:
F = m*(g - a)
g - a = F / m
a = g - F / m = 10 - 60.0 / 150 = 9.6 m/s²
my thoughts about earthwake
a baby carriage is sitting at the top of the hill that is 21 m high. the carriage with the baby has a mass or 1.5kg. the carriage has ___ energy. calculate it.
A rocket blasts off from rest and attains a speed of 33.9 m/s in 12.7 s. An astronaut has a mass of 65.1 kg. What is the astronaut's
apparent weight during takeoff?
The apparent weight of the astronaut of mass 65.1 kg moving with a speed of 33.9 m/s in 2.7 s is 811.797 N.
What is weight?Weight is the force with which a body is attracted toward the earth or a celestial body by gravitation and which is equal to the product of the mass and the local gravitational acceleration.
To calculate the astronaut's apparent weight, we use the formula below.
Formula:
W = m{[(v-u)/t]+g}............ Equation 1Where:
W = The apparent weight of the astronautm = Mass of the astronautv = Final speedu = Initial speedt = Timeg = Acceleration due to gravityFrom the question,
Given:
m = 65.1 kgv = 33.9 m/su = 0 m/s (from rest)t = 12.7 sg = 9.8 m/s²Substitute these values into equation 1
W = 65.1{[(33.9-0)/12.7]+9.8]W = 65.1×12.47W = 811.797 NHence, the apparent weight of the astronaut is 811.797 N.
Learn more about weight here: https://brainly.com/question/25973294
#SPJ1
7. A child of mass m starts from rest and slides without friction from a height h along a curved waterslide (Fig. P5.46). She is launched from a height into the pool. Figure P5.46 4/5 Fmax (a) Is mechanical energy conserved? Why?
The mechanical energy of the girl will be conserved because the system is isolated and the initial potential energy will be equal to final kinetic energy.
What is the law of conservation of energy?
The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.
The change in the potential energy of the launched from a height into the pool without friction from the given height h is calculated by applying the following kinematic equation.
ΔP.E = ΔK.E
where;
ΔP.E is change in potential energy of the childΔK.E is change in the kinetic energy of the childmghf - mghi = ¹/₂mv² - ¹/₂mu²
where;
m is the mass of the girlg is acceleration due to gravityhi is the initial height of the girlhf is the final height when she is launched into the poolu is the initial velocityv is the final velocity of the girlThus, for every closed or isolated system such as this case, mechanical energy is always conserved because the initial potential energy of the girl will be converted into her final kinetic energy.
Learn more about conservation of mechanical energy here: https://brainly.com/question/332163
#SPJ1
Suppose you are standing in the aisle of a bus that travels along a straight road at 100km/h and you have a pencil still above your head. Then relative to the bus the velocity of the pencil is 0km/h, and relative to the road the pencil had a horizontal velocity of
Answer: 100km/h
Explanation: This is because the road isn't moving. If you drew the roads velocity and the bus velocity you would find a 100km/h difference. Thus an object inside the bus would experience the same differential.
A dog is running at 7.2 m/s then comes to a complete stop after sliding for 14.4 m. What is the dog's acceleration?
The dog's acceleration :- -1.8 [tex]m/s^{2}[/tex] (deacceleration).
given data:-initial velocity u=7.2 m/s
final velocity v= 0
displacement s= 14.4m
v² = u² + 2as
a= -(7.2*7.2)/2*14.4
acceleration a= -1.8 [tex]m/s^{2}[/tex]
The calculation of acceleration?The rate at which velocity changes over a predetermined amount of time is called acceleration. By dividing the velocity change by the time change, you can calculate acceleration.
Can velocity and acceleration be equal?As time passes, the velocity is shifting. Actually, every second of time sees a change in velocity of 10 m/s, which is a constant. When an object's velocity changes, it is said to be accelerating; this implies that the object has an acceleration.
To know more about acceleration visit:-
https://brainly.com/question/2303856
#SPJ1
How do I know what base my light bulb is?
Determine if the base of a light bulb is a pin type, which has two points of contact on the base, or a screw type, which has threads all the way around the base.
What is a thread in a screw?
A screw thread, which is sometimes abbreviated as "thread," is a helical structure that converts rotational and linear force or movement. A screw thread is a ridge that is helix-shaped and wrapped around a cylinder or cone; the former is known as a straight thread and the latter as a tapered thread. The screw's thread is its most important component both as a basic machine and as a threaded fastener. The lead, or the linear distance the screw travels in one rotation, determines the mechanical advantage of a screw thread. The lead of a screw thread is often selected such that there is enough friction to prevent the conversion of linear motion to rotational, preventing the screw from slipping.
Determine if the base of a light bulb is a pin type, which has two points of contact on the base, or a screw type, which has threads all the way around the base. You can refer to the letter-number references (E12, E17, and E26) for a fuller explanation of light bulb base sizes to better comprehend a particular bulb's style and size. The first letter denotes the base's shape or form, while the number denotes the base's breadth (normally in millimeters).
To know more about threads, click on the link
https://brainly.com/question/21270821
#SPJ4
what is the answer? is it equilibrium or not?
No, the system is not in equilibrium because the forces are not balanced which caused acceleration In system.
In mechanics, a force is any action that seeks to preserve, modify, or deform a body's motion. Isaac Newton's three principles of motion, which are outlined in his Principia Mathematica, are frequently used to illustrate the idea of force (1687).
Newton's first law states that unless a force is applied to a body, it will stay in either its resting or uniformly moving condition along a straight path. According to the second law, when an external force applies on a body, the body accelerates (changes velocity) in the force's direction.
To know more about force visit : brainly.com/question/13191643
#SPJ1
A jeep drives 30m/s at 60 degrees north of east for three hours across the desert.
a. Determine the component of the jeeps velocity in the north direction.
b. How far north does the keep travel?
c. Determine the component of the jeeps velocity in the east direction.
d. How far east does the keep travel?
e. What is the total displacement of the jeep?
Component of North direction , East Direction velocity is 30√3m/s , 63.88726m/s respectively. Distance of north and east direction is 21.96 m ,8.04 m respectively and Displacement is 0.
Speed = 30m/s , Ф=60 , time= 3hrs
a. √(Vₓ² +Vₙ²) = ν
√( 3600 -900 ) = ν
30√3m/s= ν
b. ED=EA + 30
30√3= EA + 30
EA= 30√3 - 30
= 30 { √3 -1 }
=30 (1.732-1)
=30 (0.732)⇒ 21.96 m
c. √(V1² +V2²) = ν
√(3600 + 481.583)⇒ 63.88726m/s
d. Component of east direction = 30-21.96
=8.04 m
e. Displacement being a scalar quantity and state function = 0
To learn more about Velocity -
https://brainly.com/question/14582662
#SPJ1
The component of a velocity are 25m/s and 16m/s . determine the velocity
The resultant velocity of the two components velocity is 29.68 m/s.
What is resultant velocity?The resultant velocity of an object is the sum of its individual vector velocities. Also, the resultant velocity of an object is the single velocity that can effectively represent the two velocities in both magnitude and direction.
The resultant velocity of the two given components of velocity if calculated as follows;
V² = Vx² + Vy²
where;
Vx is the x component of the velocityVy is the y component of the velocityV² = 25² + 16²
V² = 881
V = √881
V = 29.68 m/s
Learn more about resultant velocity here: https://brainly.com/question/24767211
#SPJ1
35.
A block has a mass of 20.0 g and a volume of 40.0
cm³. What is its density
a. 2.0 g/cm³ 3
b. 0.5 g/cm
C.1.2 g/cm 3
d. 4.0 g/cm³
3
Answer:
Density 0.5 g/cm³
Explanation:
Given:
m = 20.0 g
V = 40.0 cm³
_________
Find ρ - ? Density
Density:
ρ = m / V
ρ = 20.0 / 40.0 = 0.5 g/cm³
As part of an experiment on Mythbusters, a car was dropped from a crane 131 m (approximately 430 ft) above the
ground. If you assume there is no air resistance,
(a) how long would it take for the car to reach the ground?
(b) with what velocity will the car hit the ground?
A. The time taken for the car to reach the ground is 5.17 s
B. The velocity with which the car will hit the ground is 50.666 m/s
A. How do I determine the time taken for the car to reach the ground?
We can simply obtain the time taken for the car to reach the ground as illustrated below:
Height (h) = 131 mAcceleration due to gravity (g) = 9.8 m/s²Time (t) = ?h = ½gt²
131 = ½ × 9.8 × t²
131 = 4.9 × t²
Divide both side by 4.9
t² = 131 / 4.9
Take the square root of both side
t = √(131/ 4.9)
t = 5.17 s
Thus, the time taken is 5.17 s
B. How do I determine the velocity with which the car will hit the ground?
The velocity with which the car will hit the ground can be obtained as follow:
Initial velocity (u) = 0 m/sTime (t) = 517 sAcceleration due to gravity (g) = 9.8 m/s²Final velocity (v) =?v = u + gt
v = 0 + (9.8 × 5.17)
v = 0 + 50.666
v = 50.666 m/s
Thus, the velocity is 50.666 m/s
Learn more about time and velocity:
https://brainly.com/question/22719691
#SPJ1
2. A runner whose initial speed is 8.06 m/s increases her speed to 8.61 m/s in order to win a race. If the
runner takes 5.00 seconds to complete this increase in speed, what is her acceleration?
Answer:
Explanation:
Given:
V₀ = 8.06 m/s
V = 8.61 m/s
t = 5.00
________
a - ?
Acceleration:
a = (V - V₀) / t
a = (8.61 - 8.06) / 5.00 ≈ 0,11 m/s²
Answer:0.11
Explanation:
a trapeze is a short horizontal bar held up by two vertical ropes on either side. An acrobat with a mass of 60 kg provides a 588 N downward force on the bar. Each of the two ropes provide an upward force of 349 N. What is the upward acceleration of the acrobat?
The upward acceleration of the acrobat is 1.833 m/s².
What is acceleration?Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).
Given parameters:
Mass of the acrobat; M = 588 N.
Weight of the acrobat acting downwards; W = 588 N.
Upward force provided by each of the two ropes; f = 349 N.
Hence, net force acting on the acrobat in upward direction = 2f -w
= (2×349 - 588 ) N.
= 110 N.
Hence, the upward acceleration of the acrobat is = net force/ mass
= 110/60 m/s².
=1.833 m/s².
So, the upward acceleration of the acrobat is 1.833 m/s².
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ1
An ideal massless spring, inclined plane, that makes an angle theta with the horizontal, and mass arrangement is given. A block of mass m is released from rest at the top of a frictionless incline. The block comes to rest momentarily after it has compressed this spring by ∆x. Initially, distance between the block and the spring is d.
Find ∆x.
Compression is Δx = √(2mgd·sinθ/k).
Given parameters:
Mass of the block = m.
Distance between the spring and the block is = d
The spring constant = k.
And, angle of inclination = θ.
And, The block comes to rest momentarily after it has compressed this spring by ∆x.
Now, loss of potential energy of the block = mgd sinθ.
And, gain in potential energy of the spring due to compression = 1/2k(Δx)²
From principle of conservation of energy,
1/2k(Δx)² = mgd sinθ.
⇒ Δx = √(2mgd·sinθ/k)
So, amount of compression is Δx = √(2mgd·sinθ/k).
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ1
Which term describes light passing straight through an object?
O transmission
O reflection
O refraction
O absorption
Answer:
transmission
Explanation:
Answer: transmission
Explanation: took test!
A liquid can easily change its shape but a solid cannot because
a. the density of liquid is smaller than that of solid.
b. the forces between the molecules is strong in solid than in liquids.
c. the atoms combine to form bigger molecules in a solid.
d. the average separation between the molecules is larger in solids.
Answer:
Explanation:
A liquid can easily change its shape but a solid cannot because:
b. The forces between the molecules is strong in solid than in liquids.
A liquid can easily change its shape but a solid cannot because the forces between the molecules is strong in solid than in liquids. Thus Option b is the answer.
There is some kinds of forces that holds the molecules each other like for example in hydrogen chloride [ HCl ] the relatively positive hydrogen of one molecule is attracted to the negative chlorine of other due to dipole dipole interaction.
Actually structure of any molecule means combination of repulsive and attractive forces which is relatively concerned with charge and electron spin.
Solids have significant intermolecular forces so its difficult to dissociate the bonds and create a new shape , while fluids have insignificant molecular forces due to which its easier to generate new shapes.
So that's why Solids cannot change its shape with that ease as liquids do.
To know more about intermolecular forces-
https://brainly.com/question/9007693
Can you help? It give a example and I need help seeing what type of boundary it is.
Answer:
Explanation:
4. Convergent boundary- when two plates move closer together.
5. Divergent boundary- when two plates move apart
6. Transform boundary- when two plates move past each other
A particle of mass 2 kg moves along the x-axis attracted toward the origin by a force whose magnitude is 8x. If the mass is initially at rest at x 20, find the following: a) The differential equation and initial conditions describing the motion. b) The position of the particle at any time. c) The velocity of the particle at any time. d) The amplitude, period and frequency of the motion.
Answer:
A
Explanation:
this is because 2×8×20=320
Q7, how the ans is 4.9 not 19.6?
the answer is c in question 7
If a 62 kg panther sits in a tree 1.3 meters above the ground, how much gravitational potential energy does it have?
If the air resistance cause the panther to lose 200 J of energy as it falls, what is the KE of the panther just before it hits the ground?
What was the velocity of the panther just before it hit the ground?
Answer:
below
Explanation:
PE = mgh = 62 * 9.81 * 1.3 = 791 J
now lose 200 J to air resistance = 591 J that is converted to kinetic energy
KE = 1/2 m v^2
591 = 1/2 (62)(v^2) shows v = 4.4 m/s
URGENT!! ILL GIVE
BRAINLIEST!!!! AND 100 POINTS!!!!!
Answer: B
Explanation:
You will have air resistance as a type of friction, and since there isn't a normal force opposing it, gravity will bring the ball toward the ground.
why do some object remain hot for a long period of time and some object remain hot for short period of time ? urgent
Some object remains hot for a long period of time because they have low thermal conductivity and some object remain hot for a short period of time because they have high thermal conductivity.
What is thermal conductivity?Thermal conductivity is a property of a substance to allow heat to flow through it easily.
Thermal conductivity is a measure of how well a substance will conduct heat or not.
Objects that have high thermal conductivity gain heat easily and also lose heat easily. Hence, they get hot quickly and also get cold quickly.
Objects that have low thermal conductivity gain heat slowly and also lose heat slowly. Hence, they get hot slowly and also get cold slowly.
Learn more about thermal conductivity at: https://brainly.com/question/14919402
#SPJ1
The current theory of the structure of the
Earth, called plate tectonics, tells us that the
continents are in constant motion.
Assume that the North American continent
can be represented by a slab of rock 4050 km
on a side and 29 km deep and that the rock
has an average mass density of 2750 kg/m3
The continent is moving at the rate of about
4.8 cm/year.
1)What is the mass of the continent?
Answer in units of kg.
2)What is the kinetic energy of the continent?
Answer in units of J.
3)A jogger (of mass 63 kg) has the same kinetic
energy as that of the continent.
What would his speed be?
Answer in units of m/s.
The mass of the continent which s represented as a slab of rock of 4050 km on a side and 29 km deep and the rock has an average mass density of 2750 kg/m3 is 1.31 * [tex]10^{21}[/tex] Kg.
What is kinetic energy?
A moving item or particle might have the power of a certain type called kinetic energy. By applying a net force, an item can perform work, which involves the transfer of energy. As a result, the object accelerates and as a result, gains kinetic energy.
Given:
The side of the slab, a = 4050 km,
The density of slab, d = 2750 kg/[tex]m^3[/tex],
The depth of the slab, h = 29 km.
Calculate the mass by the following formula,
m = [tex]V * d[/tex]
Here, m represents mass and V represents volume,
m = 4050 * [tex]10^3[/tex]* 29 * [tex]10^3[/tex] * 4050 * [tex]10^3[/tex] * 2750
m = 1.31 * [tex]10^{21}[/tex] kg
Therefore, the mass of the continent is 1.31 * [tex]10^{21}[/tex] kg.
To know more about Kinetic energy:
https://brainly.com/question/999862
#SPJ1
Derrick goes to a party and has a bad time, which decreases his party going behavior. This is an
example of
A) positive reinforcement
B) negative reinforcement
C positive punishment
D) negative punishment
Answer:
B) negative reinforcement
Explanation:
Derrick goes to a party and has a bad time, which decreases his party going behavior. This is an example of negative reinforcement. Hence option B is correct.
What is reinforcement ?According to the reinforcement hypothesis, "contingent consequences" of human activities lead to human behaviour. This means that when employees get the appropriate reinforcers, their conduct can change for the better, and bad behaviour can be eliminated.
Self-awareness, self-reflection, and self-regulation are the three key tenets of the self-regulation paradigm of human behaviour. Historically, rewards have correlated with self-regulation. Although the result may have an impact on the conduct, behaviour also need antecedents. Positive reinforcement, negative reinforcement, extinction, and punishment are the four different forms of reinforcement. The use of a positive reinforcer is known as positive reinforcement. In order to encourage the antecedent behavior from that, negative reinforcement is the technique of eliminating anything undesirable from the subject's environment.
Hence option B is correct.
To know more about Reinforcement ;
https://brainly.com/question/5162646
#SPJ2.
A. A toy car works by means of a stretched rubber band. What form of potential energy does the car store when the band is stretched
B. A bar magnet is lying with its north pose next to the south pole of another bar magnet. A student pulls them apart. Why do we say that the magnets' potential energy has increased? Where has the energy come from?
a) The energy that is stored in a rubber band is the elastic potential energy
b) The potential energy of the magnets increases as work is done to separate the opposite poles.
What is potential energy?We define the potential energy as the energy that is possessed by a body that is at rest. In other words, it is an energy that is possessed by a body that is not in motion. It is a result of the position of a body.
However, the potential energy can be released to do work when there is need. In this case, we have two different cases where the potential energy that have been stored in a body is released to do work.
a) In this case, the potential energy that is stored in the rubber band is the elastic potential energy. When we stretch the rubber band, this energy is now available to do work.
b) The potential energy of the magnets is said to increase when we pull them apart because more work is done to separate the opposite poles of the magnet. The energy comes from the separation of the poles of the magnets.
Learn more about potential energy:https://brainly.com/question/24284560
#SPJ1