Using the theories of lineweaver-burk, we got that 0.05 as the approximate numerical value of the slope of the lineweaver-burk plot of these kinetic data.
The Lineweaver–Burk plot is correct when enzyme kinetics obey ideal second-order kinetics, however the non-linear regression is needed for systems that do not behave ideally. The double reciprocal plot distorts error structure of the data, and is therefore not most accurate tool for the determination of the enzyme kinetic parameters
Slope is equal to Km/Vmax
Km is half of Vmax
Vmax is 200 um/min, so Km is found at 100 um/min. At 100 um/min ,we know that the substrate concentration is 10 um. Thus, the Km is 10 um, which is equivalent to 10/200= 0.05
Hence, the approximate numerical value of the slope of the lineweaver-burk plot of these kinetic data is 0.05
To know more about lineweaver-burk, visit here:
https://brainly.com/question/13155840
#SPJ4
find the mass and center of mass of a solid hemisphere of radius if the density at any point is proportional to its distance from the base.
center of mass of a solid hemisphere of radius R is 3R / 8 and the Mass of the solid is M.
An elemental disc at a height of h from the base of the hemisphere is taken.
The mass of the elemental disc is taken dM
and the width is taken dy.
et the solid hemisphere be of mass M and has the radius R.
The center of mass will lie vertically which passes through the center of the hemisphere.
Taking the elemental disc at a height h from the base of the hemisphere’s base. The DM is the mass of the elemental disc and the width is dy.
the radius of the disc is:
R = R²- y²
Mass of the disc dM
= (3 M/ 2π R³) × ( πr² dy ) …..(2)
eq.(1) in eq.(2)..................
dM = ( 3M / 2 π R³ ) × π ( R² – y² ) dy)
Y - coordinate of Centre of mass,
Yc = (1 / M) ഽ y dM
Here y is the y - coordinate representing the height of the elemental disc from the base.
Putting the dM and calculating the center of mass, we get
yc= (1/M) ഽ y(3M /2 R^3) × ( R^2 - y^2) dy)
Integrating between 0⟶R
yc = (1/M) ഽ y (3M / 2 R^3) × (R^2 - y^2) dy)
yc = ( 3/2r^3 ) ഽ × (R^3 y- y^3 ) dy
= ( 3/ 2R2)[ (R4 / 2 ) – ( R4 / 4)] = 3R / 8
yc = 3 R /8
Centre of Mass of solid hemisphere (yc) = 3 R / 8.
Mass of solid = M
To know more about center of mass questions :
https://brainly.com/question/28134510
#SPJ4
Why aren’t there solar and lunar eclipses every month?
A. Because clouds in Earth’s atmosphere block the Moon’s shadow.
B. Because of the gravitational effects of Jupiter on the Sun.
C. Because the Moon’s orbit is tilted with respect to Earth’s orbit.
D. There are, it’s just that we cannot detect all of them.
Answer:
The answer is C.
When Earth is positioned precisely between the Moon and Sun, Earth's shadow falls upon the surface of the Moon, dimming it and sometimes turning the lunar surface a striking red over the course of a few hours which is how a lunar eclipse happens.
When the Moon orbits Earth, the Moon moves between the Sun and Earth. When this happens, the Moon blocks the light of the Sun from reaching Earth. This causes an eclipse of the Sun, or a solar eclipse. During a solar eclipse, the Moon casts a shadow onto Earth.
A 1{,}000 \text{ kg}1,000 kg1, comma, 000, start text, space, k, g, end text car experiences a net force of 3{,}500 \text{ N}3,500 N3, comma, 500, start text, space, N, end text from its engine.
Calculate the magnitude of the car’s acceleration.
Magnitude of the car's acceleration is 3.5 m/s²
Given:
Mass of car = 1,000 kg
Net force applied by car = 3,500 N
How to find the acceleration of the car?
Formula:
Net force = Mass × Acceleration
So,
3,500 = 1,000 × Acceleration
Acceleration = 3,500 / 1,000
Acceleration = 3.5 m/s²
Therefore, the acceleration found from the formula is 3.5 m/s².
To learn more about acceleration , click on the link below
https://brainly.com/question/24589431
#SPJ1
HELP STUCK IN PHYSICS 100PTS!!!
A small piece of putty of mass 27 g and
negligible size has a speed of 2.2 m/s. It makes
a collision with a rod of length 5 cm and mass
78 g (initially at rest) such that the putty hits
the very end of the rod. The putty sticks to
the end of the rod and spins around after the
collision; the putty-rod center of mass CM has
a linear velocity v and an angular velocity ω
about the CM.
(a)What is the angular momentum of the system relative to the CM after the collision?
The rod has a moment of inertia equal to (1/12)MR^2
about its center of mass; consider
the piece of putty as a point mass. Assume
the collision takes place in outer space where
there is no gravitational field and no friction.
Answer in units of kg · m2
/s.
(b)What is the system’s angular speed about the
CM after the collision?
Answer in units of rad/s.
I'm so confused :(
Answer:
a) 20.65kg
b)4.7rad
Explanation:
what is the minimum energy input necessary to place this satellite in orbit? ignore air resistance but include the effect of the planet's daily rotation. (use the following as necessary: re, me, g, m, h, and te for the period of earth's rotation.)
The minimum energy input necessary to place this satellite in orbit is
[tex]\frac{1}{2} m(v^{2} - v_{e} ^{2} ) +GM_{E} m(\frac{1}{r} -\frac{1}{R_{E} } )[/tex]
The mass of the satellite = m
Altitude = h = r
The radius of the Earth = [tex]R_{E}[/tex]
The Mass of the Earth = [tex]M_{E}[/tex]
Speed of the satellite = v
Speed of the Earth = [tex]v_{e}[/tex]
Gravitational Constant = G
The energy at the surface of the Earth will be the sum of the kinetic and potential Energy,
So,
[tex]E_{i} = K.E. +P.E.\\\\ E_{i} = \frac{1}{2} mv_{e} ^{2} -\frac{GM_{E} m}{r}[/tex]
Also, Energy in orbit,
[tex]E_{i} = K.E. +P.E.\\\\ E_{i} = \frac{1}{2} mv^{2} -\frac{GM_{E} m}{R_{E} }[/tex]
Now, The change in energy is the minimum energy required to place this satellite in orbit,
Then, the Change in Energy =
∆E [tex]= \frac{1}{2} m(v^{2} - v_{e} ^{2} ) +GM_{E} m(\frac{1}{r} -\frac{1}{R_{E} } )[/tex]
To read more about energy, visit https://brainly.com/question/1932868
#SPJ4
0.000789kg/m3 divided by 2m3
Answer:
0.0003945 kg / m6
Explanation:
which best describes the field of physics? the study of integrating natural sciences the study of scientific laws the study of foundational engineering the study of life and chemical interactions the study of matter and energy next
which best describes the field of physics the study of matter and energy
physics, science that deals with the structure of matter and the interactions between the elemental constituents of the observable universe. the scope of study envelops not as it were the conduct of objects beneath the activity of given forces but the nature and root of gravitational, electromagnetic, and nuclear force fields. In simple words, physics is characterized as the science of matter, movement, and energy. Its laws are regularly expressed with economy and accuracy within the language of science.
to know more about physics refer to the link https://brainly.com/question/28600368?referrer=searchResults.
#SPJ4
a body with initial velocity 8 m/s moves along a straight line with constant acceleration and travels 744 m in 42 s. for this given time interval, find the acceleration in m/s2.
Answer: ACCELARATION = 0.462M/S²
Explanation: INITIAL VELOCITY (VI) = 8M/S
DISTANCE COVERED (S) = 744M
TIME (t) = 42 S
ACCELERATION (A)= ?
BY APPLYING 2ND EQUATION OF MOTION
S = VIT +1/2 AT²
744 = 8 X 42 +1/2 A X42²
744 - 336 = 1/2 A X 42²
408 X 2/1764 = A
A = 816 /1764
A = 0.462M/S²
The volume v of a gas varies directly as the temperature t and inversely as its pressure p if v = 80ml when t=30 and p=10kg what will be the volume when t =20 and p =20kg?
The volume of the gas at the given conditions will be 26.6 ML.
By Ideal Gas Law we know that
[tex]\frac{P1 V1}{T1}[/tex] = [tex]\frac{P2 V2}{T2}[/tex]
In the given question here, P1 = 10 Kg ; V1 = 80 ML ; T1 = 30 ; P2 = 20 Kg ; T2 = 20 Substituting the values in the equation
[tex]\frac{10 X 80}{30\\}[/tex] = [tex]\frac{20 V2}{20}[/tex]
[tex]\frac{80}{3}[/tex] = V2
V2 = 26.6 ML .
To know more about Ideal Gas Law :
brainly.com/question/3637553
#SPJ4
2. As a shot putter in track, you want to throw as far as you can. You as the coach give your
best advice based on the Physics you learned. Give 2 suggestions to help your student and
explain why? (6 Pts.)
As a shot putter in track, if you want to throw far then throw it fast and at angle approximately 45 degrees.
How can shot putter throw farther?As a thrower spins, his body acts as an axis of rotation and therefore, farther the object is from the axis of rotation, larger is its moment of inertia.
The angle of release in the shot-put event is of great importance. The estimation of the optimum angle of release such that the distance thrown is maximized is a key. Theory has shown that the optimum angle of release is between 41 to 43 degrees.
Release velocity is also a important factor in determining the distance of a throw. Release velocities of about 13 m/s are necessary for elite-level throws.
To know more about shot - put, refer
https://brainly.com/question/14758833
#SPJ1
A 3.5 kg bowling ball is rolling in a straight line. if its momentum is 14 kg * m/s , how fast is the bowling ball traveling?
The velocity of the bowling ball is 4 m/s when mass of the bowling ball is 3.5 kg and momentum given is 14kgm/s.
As we know that,
Momentum= Mass* Velocity
p=mv
Here, Mass of the Bowling Ball(m)= 3.5 Kg
Momentum(p)= 14kgm/s
Velocity= Momentum/Mass
=14/3.5 = 4m/s
The definition of momentum is "mass in motion." Since every item has mass, if it is moving, it must have momentum since its mass is in motion. The quantity of motion and the speed of the motion are the two factors that determine how much momentum an item possesses. The factors mass and velocity affect momentum. According to an equation, an object's momentum is determined by multiplying its mass by its velocity.
Learn more about Momentum here:
https://brainly.com/question/24030570
#SPJ4
To answer this question, we need to use the formula for momentum, which is:
momentum = mass * velocity
We can rearrange this formula to solve for velocity, which is:
velocity = momentum/mass
We are given the momentum and the mass of the bowling ball, so we can plug them into the formula:
velocity = 14 / 3.5
We can simplify this expression by dividing both numbers by 0.5:
velocity = 28 / 7
We can convert this fraction into a decimal by dividing the numerator by the denominator:
velocity = 4
Therefore, the bowling ball is travelling at 4 m/s.
Uv rays are a type of ""ionizing radiation"" and are energetic enough to damage biological tissue such that they degrade into ions and electrons. What other forms of electromagnetic radiation do you think could be ionizing?.
Other forms of electromagnetic radiation you think could be ionizing are x-rays and gamma rays.
Ionizing radiation, including nuclear radiation, consists of subatomic debris or electromagnetic waves which have sufficient strength to ionize atoms or molecules by using detaching electrons from them.
Ionizing radiation is a shape of power that acts by using casting off electrons from atoms and molecules of materials that include air, water, and dwelling tissue. Ionizing radiation can journey unseen and bypass these materials. whilst ionizing radiation interacts with cells, it is able to purpose damage to the cells and genetic fabric (i.e., deoxyribonucleic acid, or DNA). If now not properly repaired, this damage can result in the death of the mobile or probably dangerous adjustments in the DNA (i.e., mutations.
Learn more about ionizing radiation here:-https://brainly.com/question/17095776
#SPJ4
describe an experiment that you could do to measure the horsepower you expend over a specified period of time (both short and long periods). do not describe experiments involving walking/running up a hill, on a treadmill, or around a track, etc.
An experiment that I could do to measure the horsepower I could develop for a long period of time can be "Riding a bike over a straight path".
What is horsepower?
Horsepower can be defined as the unit of measurement of power, or the rate at which work is done. There are many different standards and types of horsepower. In order to calculate horse power we will use the following method ;
Power = Work / Time Power (Force x Distance) / TimeThe term Horsepower was invented by James Watt. It is a unit power that compares the power of a machine to the horse muscle power, steam engine power output compared to the power of draft horses. Now it is used in piston engines, electric motors, turbines and other machinery.
One Horsepower equals to 33,000 lb. ft/min.
To know more about Horsepower from the given link
https://brainly.com/question/28776651
#SPJ4
Since the drag force is proportional to the square of speed, what can you do to improve your car’s gas mileage?.
The answer is Aerodynamic Shaping.
Aerodynamic Shaping can reduce the drag force of an automobile and hence Increase the car's gas mileage. Integrated into the overall shape of an aerodynamic car are the wheel arches and headlights that reduce drag while also reducing wind resistance.
AeroDynamics is basically the study of how air move arround the things which deal with lift, drag, thurst and weight.
To know more about AeroDynamics :
brainly.com/question/10121475
#SPJ4
How did Copernicus influenced newton
Copernicus influenced Newton as the Copernican Revolution was brought to a close by Sir Isaac Newton's Philosophiae Naturalis Principia Mathematica.
How was Newton influenced?Copernicus, the father of modern astronomy, was a Polish astronomer and mathematician. He was the first European scientist to propose the heliocentric theory of the solar system, which states that Earth and other planets revolve around the sun.
By developing the heliocentric theory of Earth's relationship to our Sun, Nicolaus Copernicus altered how educated people saw the world. The heliocentric theory, which is now widely accepted, states that Earth and the other planets revolve around the Sun.
His laws of planetary motion and universal gravitation were developed to explain the presumed motion of the heavens by asserting a gravitational force of attraction between two objects.
Learn more about Newton on:
https://brainly.com/question/25545050
#SPJ1
A car is travelling north at a constant speed of 20 m/s. A force is applied directly east on the car. The motion of the car will be change in which of these ways?.
D is the correct response because, although the car's speed won't change, its direction of travel will.
The car's acceleration is zero because it is driving at a constant speed of 20 meters per second. A further definition of force is the sum of mass and acceleration. Additionally, because there is no acceleration, there is no net force acting on the vehicle. For instance, the car might be round a corner at a steady speed. The speed will remain the same, but the car will change the direction it is moving.
The complete question is- car is travelling north at a constant speed of 20 m/s. A force is applied directly east on the car. The motion of the car will be change in which of these ways? A) The speed of the car will increase. B) The speed of the car will decrease. C) The speed will increase, and the car will change the direction it is moving. D) The speed will remain the same, but the car will change the direction it is moving.
Learn more about acceleration here-
https://brainly.com/question/12550364
#SPJ4
If it takes an object 3.5 seconds to make one revolution, what is its frequency?
If it takes an object 3.5 seconds to make one revolution, its frequency is 0.286 Hz.
What is frequency?The number of vibrations counted per second is called frequency. A wave is a group of vibrations that are referred to as energy. The bottom node is known as the crest, and the top node is known as the trough.
The frequency of an alternating current is the number of full cycles per second. The hertz, also known as Hz, is the accepted unit of frequency. The frequency of a current is 1 Hz if one cycle is completed per second; 60 cycles per second equals 60 Hz.
Frequency = 1/t
Frequency = 1/3.5
Frequency = 0.286 Hz
If it takes an object 3.5 seconds to make one revolution, its frequency is 0.286 Hz
To learn more about frequency refer to the link:
brainly.com/question/5102661
#SPJ1
an object of mass 0.8 kg is attached to an ideal horizontal spring of spring constant 180 n/m. the object is initially at rest at equilibrium. how much work would it take to set the object into an oscillation with amplitude 0.02 m?
0.072 J is the work would the spring take to set the object into an oscillation with amplitude 0.02 m
What is amplitude?A periodic variable's amplitude is a gauge of its change over a single period. A non-periodic signal's magnitude in relation to a standard value is its amplitude. There are several ways to define amplitude, and they are all dependent on how much the extreme values of the variable deviate from one another.
What is a spring constant?The stiffness of the spring is how we determine spring constant. In other words, we can define the spring constant as the force used to produce the specified displacement when the spring's displacement is one unit. It follows that a spring's spring constant will increase with increasing spring stiffness.
Now to calculate the work done by spring we use the Hookes’s law
F=kx
Where F is the force required
K is the spring constant
X is the amplitude or distance
So F=kx
F=180x0.02
F=3.6 N
Now to calculate work :
Work = Force × Distance.
Work=3.6 N x0.02m
Work =0.072 J
Hence, 0.072 J is the work would the spring take to set the object into an oscillation with amplitude 0.02 m
To know more about the spring constant visit
https://brainly.com/question/14670501
#SPJ4
you know a 100 watt light bulb glows brighter than a 50 watt light bulb. but which bulb has the higher electrical resistance?
100 watt light bulb glows brighter than a 50 watt light bulb and 50 watt light bulb is higher resistance than 100 watt bulb.
A circuit's opposition to current flow is measured by its resistance. Resistance is the degree to which a substance obstructs or opposes an electric current. Electron flow is referred to as electric current. To better understand resistance, imagine how difficult it would be for a person to move from one shop to another in a crowded market. Resistors are used in heaters, toasters, microwaves, electric stoves, and a variety of other heating appliances due to their inherent ability to generate heat when conducting current. When electricity is passed through a metal filament in a light bulb, a very high temperature is created from the resistance, which causes the metal filament to glow white-hot. The ohm (), which represents resistance, is denoted by the letter R.
Learn more about resistance here:
https://brainly.com/question/11431009
#SPJ4
Which of the following is true of Earth’s atmosphere?
A. It is mostly made up CO2.
B. It gets more dense as you go higher in altitude.
C. It has more nitrogen than oxygen.
D. No one has ever been above it.
Answer:
c) It has more nitrogen than oxygen.
Explanation:
Our Earth’s atmosphere has more nitrogen (78%) than oxygen (21%). Hence, the option (c) is the correct answer.
Answer:
C. It has more nitrogen than oxygen.
Explanation:
Earth's atmosphere is composed of about 78% nitrogen, 21% oxygen, and one percent other gases. These gases are found in layers (troposphere, stratosphere, mesosphere, thermosphere, and exosphere).
What is the total energy of a stationary 350g ball 12m above the ground? What type of energy is it?
What is the total energy of the same ball right before it hits the ground? What type of energy is it?
If the same ball is 2m above the ground, what is the Potential Energy and what is the Kinetic Energy?
Calculate the velocity of the ball when it is 2m above the ground.
*with steps
The velocity of the ball is obtained as 6.26 m/s.
What is the energy?We know that the kinetic energy is the energy that is possessed by a body by virtue of the fact that it is in motion while the potential energy is the energy that is possessed by a body that is at rest.
Now we have that;
Mass of the ball = 350g or 0.35 Kg
Height of the ball = 12m
The energy of the ball at this height is potential energy. The total energy before the ball hits the ground is; 0.35 * 12 * 9.8 m/s^2 = 41.2 J and this energy is kinetic energy.
If the ball is 2m above the ground its potential energy is 2 * 2 * 9.8 m/s^2 = 39.2 m/s and the kinetic energy of the ball is zero m/s.
The velocity with which the ball hits the ground is;
mgh = 1/2mv^2
gh = 1/2v^2
v = √2gh
v = √2 * 9.8 * 2
v = 6.26 m/s
Learn more about potential energy:https://brainly.com/question/24284560
#SPJ1
. in this activity, you will be looking for a relationship between the force on the cart and the acceleration of the cart. which variable do you need to keep constant during this experiment?
A push or pull on an object is a force. All of the forces operating on an object are added together to form a net force. When an object is subject to a net force, the object will change its speed in that direction. The acceleration of an object reveals how much it accelerates or decelerates.
We can determine what occurs with the acceleration and force while maintaining the mass constant.
A connection between the mass of the cart and its acceleration. Taking into consideration Newton's second law, which states that
force = mass × acceleration
As a result, the force will change if the acceleration does. Keeping the mass constant will allow us to determine how changing the acceleration will affect the force. Once the mass is kept constant, you can determine what will happen. Therefore, if we want to maintain the acceleration constant while also changing, we must alter the mass of the car. This means adding mass to the cart—whether it be in the form of mass blocks or larger carts—or otherwise altering its mass.
To know more about force and acceleration, click on the link below:
https://brainly.com/question/14343220
#SPJ4
A marathon runner is running with an initial velocity of 3.95 m/s. As the runner approaches the finish line, she increases her velocity to 4.17 m/s. What is the acceleration of the runner approaching the finish line?
Given that the time between when the marathon runner changes her velocity and the finish line is t, the acceleration of the runner approaching the finish line is 0.22/t m/s² .
What is acceleration?The acceleration of a body is the change in the velocity of a body with time.
Acceleration is a vector quantity as it takes into account the change in velocity as well as the change in the direction of the body.
Hence, a body is accelerating if either or both of these two conditions apply:
a change in the velocity occursa change in the direction of the bodyMathematically;
acceleration = change in velocity / time takenThe change in velocity of a body = Final velocity - initial velocity
Change in velocity of the runner = 4.17 - 3.95
Change in velocity of the runner = 0.22 m/s
Time taken for this change = t
Hence;
acceleration = 0.22/t m/s²
Learn more about acceleration at: https://brainly.com/question/460763
#SPJ1
A type of air cooler works by blowing air from the room through
a sponge soaked in water.
Explain how blowing air through a sponge soaked in water lowers
the temperature of the air.
A rock suspended by a string weighs 5 n out of water and 3 n when submerged. What is the buoyant force on the rock?.
The buoyant force exerted on the rock is 2 N.
What is buoyant force?Buoyancy is the upward force exerted by a liquid that opposes the weight of a partially or fully submerged object. In a liquid column, the pressure increases with depth due to the weight of the liquid above. Buoyancy exists whether an object is floating or submerged. The SI unit of buoyancy is Newton. The factors on which buoyancy depends are:
Volume of the liquid displacedVolume of the body submerged in liquidFor the given case,
Weight of the rock out of water (W₀) = 5N
Weight of the rock when submerged in water (Wₙ) = 3N
Now what decreases the weight of rock in water? It is the buoyant force exerted by water, which can be can be calculated as:
Fᵇ = W₀ - Wₙ
Fᵇ = 5N - 3N
Fᵇ = 2N
To know more about buoyant force visit:
https://brainly.com/question/7379745
#SPJ4
A 30 kg object is moving along with the velocity given below. Find the momentum vector, as well as the magnitude of the momentum. v=5i-2j
Using the concepts of momentum, we got that 150i-60j is the momentum vector and 162.3Kg-m/sec is the magnitude of the momentum of a 30 kg object.
We know very well that momentum is given by the product of mass and velocity of the object.
In other words P=M. v
But, here velocity is given in 2-D form, means momentum is possible in two different directions.
Therefore, for momentum we just need to multiply the mass of the object with velocity
=>Momentum of the object=M×(5i-2j)
=> p=30×(5i-2j)
=> p=150i-60j
Now, talking about the magnitude we know that magnitude is given by
√(x-component)² + (y-component)²
Therefore, magnitude of momentum (|p|)=√(150)²+(--60)²
=> |p|=√22500+3600
=> |p|=√26100
=> |p|=162.3Kg-m/sec
Hence, for 30 kg object is moving along with the velocity given, the momentum vector is 150i-60j, as well as the magnitude of the momentum for v=5i-2j is 162.3kg-m/sec.
To know more about momentum, visit here:
https://brainly.com/question/24030570
#SPJ4
6. Borax was mined in Death Valley, California, during the nineteenth century. It
was transported from the valley by massive wagons, each pulled by a team of
21 mules. Suppose each mule's power output was 746 W (about 1 hp). If in a
certain time interval the total work done by the team on the wagon was
2.35x 10' J, how long was that interval of time?
The interval of time it takes for the team to do a work of 2.35×10⁷ J is 15000 seconds.
What is time?Time can be defined as an ongoing and continuous sequence of events that occur in succession, from past through the present, and to the future.
To calculate the time interval the work was done by the team on the wagon, we use the formula below.
Formula:
t = W/P........... Equation 1Where:
t = Interval of time it takes the team to do the workW = Total work done by the team on the wagonP = Power output of the teamFrom the question,
Given:
W = 2.35×10⁷ JP = 746×21 ( If each mole power output is 746 W)P = 15666 WSubstitute these values into equation 1
t = 2.35×10⁷/15666t = 1500 seconds.Hence, the interval of time it takes to the the work is 15000 seconds.
Learn more about time here: https://brainly.com/question/26046491
#SPJ1
historically, it turned out that einstein's theory could explain everything newton's theory could, while also explaining more. what quality is it most accurate to say that einstein's theory has based on this brief description?
Scope quality is it most accurate to say that einstein's theory has based on this brief description.
According to Einstein's theory of relativity, the curvature of space and time is what causes what we experience as the gravitational force. This is the fundamental tenet of Einstein's theory of general relativity, which is frequently encapsulated in the sentence: "Matter instructs spacetime to curve, and curled spacetime instructs matter to move." Based on Einstein's astounding discovery that light always moves at a constant speed, regardless of how fast you're moving when you measure it, the theory, which revolutionized our understanding of time and space, was developed. Light in the quantum realm. The photons that make up light, or photons, are tiny energy packets with wavelike characteristics, as demonstrated by Einstein's quantum theory of light. In this theory, Einstein also described the process by which electrons are released from metals after being struck by lightning.
Learn more about einstein's theory here:
https://brainly.com/question/3202394
#SPJ4
What is the displacement for a trip from the math classroom in Figure 2.4 to the music classroom and then to the library? What is the distance for this trip?
14 m is the displacement for a trip from the math classroom in Figure 2.4 to the music classroom and then to the library
Displacement= final position-initial position
Displacement=14m-0
Displacement=14m
distance= total route= 14m
Distance is all covered distance but displacement is shortest distance. Being a vector quantity, displacement has both a magnitude and a direction. The vector (or straight line) distance between an initial and final position is what is meant by this term. Knowing these two places is consequently all that is necessary to determine the resultant displacement.
Calculate the inverse tangent of the ratio of the displacement components in the y- and x-directions to determine the direction of the displacement vector.
To know more about displacement visit : brainly.com/question/11934397
#SPJ1
a particle is projected horizontally at 10m/s from the top of a tower 20m high.
calculate the horizontal distance travelled by the particle.( g=10m/s^2)