Answer:
Energy decreases and wavelength gets longer.
Explanation:
The energy of a wave is given by :
[tex]E=hf[/tex]
Where
h is Planck's constant
f is the frequency of the wave
As frequency decreases, the energy of the wave also decreases and wavelength gets longer. Hence, the option is (d).
Calculate the pH for each case in the titration of 50.0 mL of 0.220 M HClO(aq) with 0.220 M KOH(aq). Use the ionization constant for HClO, 4.0×10⁻⁸
What is the pH before addition of any KOH?
What is the pH after addition of 25.0 mL KOH?
What is the pH after addition of 35.0 mL KOH?
What is the pH after addition of 50.0 mL KOH?
What is the pH after addition of 60.0 mL KOH?
To calculate the pH at each stage of the titration, we need to consider the reaction between HClO and KOH. The balanced chemical equation for the reaction is:
HClO(aq) + KOH(aq) → KClO(aq) + H2O(l)
Before the addition of any KOH, we have only the HClO solution. HClO is a weak acid, so we can use the ionization constant (Ka) to calculate its initial concentration of H⁺ ions. Since HClO is the only acid present initially, the initial concentration of H⁺ ions is equal to the initial concentration of HClO. Therefore, [H⁺] = 0.220 M.
To calculate the pH after each addition of KOH, we need to determine the amount of HClO that reacts with KOH. From the balanced equation, we can see that the stoichiometric ratio between HClO and KOH is 1:1. This means that for every mole of HClO that reacts, an equal number of moles of H⁺ ions are consumed.
Before addition of any KOH:
[H⁺] = 0.220 M (given)
pH = -log10(0.220) ≈ 0.66
After addition of 25.0 mL KOH:
The amount of HClO reacted can be calculated using the initial concentration and the volume of KOH added. Since the concentration of KOH is the same as HClO, the concentration of HClO remaining is (0.220 M - 0.220 M/4) = 0.165 M. The volume of HClO solution remaining is (50.0 mL - 25.0 mL) = 25.0 mL = 0.025 L. Therefore, [H⁺] = 0.165 M/0.025 L = 6.6 M.
After addition of 35.0 mL KOH:
Following the same calculations as above, [H⁺] = 0.110 M.
After addition of 50.0 mL KOH:
[H⁺] = 0.055 M.
After addition of 60.0 mL KOH:
[H⁺] = 0.022 M.
Keep in mind that pH is a logarithmic scale, so as the concentration of H⁺ ions decreases, the pH value increases.
Learn more about pH here : brainly.com/question/2288405
#SPJ11
write the net ionic equation for the mixing of sodium iodide and the solution of lead(ii) nitrate.
The net ionic equation for the mixing of sodium iodide and lead(II) nitrate is:
Pb2+ (aq) + 2I- (aq) → PbI2 (s)
The net ionic equation for the mixing of sodium iodide (NaI) and lead(II) nitrate (Pb(NO3)2) can be determined by examining the dissociation of the compounds and identifying the ions involved in the reaction. Here's the breakdown of the reaction:
Sodium iodide (NaI) dissociates in water to form sodium ions (Na+) and iodide ions (I-):
NaI (aq) → Na+ (aq) + I- (aq)
Lead(II) nitrate (Pb(NO3)2) dissociates in water to form lead(II) ions (Pb2+) and nitrate ions (NO3-):
Pb(NO3)2 (aq) → Pb2+ (aq) + 2NO3- (aq)
When these two solutions are mixed, a double displacement reaction occurs, leading to the formation of a precipitate. The iodide ions (I-) from sodium iodide react with the lead(II) ions (Pb2+) from lead(II) nitrate to form solid lead(II) iodide (PbI2):
2Na+ (aq) + Pb2+ (aq) + 2I- (aq) + 2NO3- (aq) → PbI2 (s) + 2Na+ (aq) + 2NO3- (aq)
The net ionic equation is obtained by removing the spectator ions, which do not participate in the reaction. In this case, the spectator ions are the sodium ions (Na+) and nitrate ions (NO3-):
Pb2+ (aq) + 2I- (aq) → PbI2 (s)
Learn more about ionic equation here, https://brainly.com/question/13879496
#SPJ11
Give IUPAC names for the following compounds.
a)
(CH3CH2)3CCH2CH2CH(CH3)2
b)
(CH3)2CHC(CH3)2CH2CH2CH3
a)The IUPAC name for the compound (CH3CH2)3CCH2CH2CH(CH3)2 is 2,2,3-trimethylpentane.
b) The IUPAC name for the compound (CH3)2CHC(CH3)2CH2CH2CH3 is 3,3-dimethyl-2-methylbutane.
a) The compound (CH3CH2)3CCH2CH2CH(CH3)2 is named 2,2,3-trimethylpentane. The name is derived by identifying the longest continuous carbon chain, which is five carbons in this case.
The substituents are then listed in alphabetical order, preceded by their respective position on the main chain. The compound contains a tert-butyl group [(CH3)3C-] attached to the second carbon atom, and a methyl group (CH3) attached to the fourth carbon atom.
The presence of the three ethyl groups [CH2CH3] on the third carbon and two methyl groups [CH3] on the fifth carbon is indicated by the prefix "trimethyl" and "pentane" signifies the parent alkane with five carbon atoms.
b) The compound (CH3)2CHC(CH3)2CH2CH2CH3 is named 3,3-dimethyl-2-methylbutane. The name is determined by identifying the longest continuous carbon chain, which is six carbons in this case.
The substituents are then listed in alphabetical order, preceded by their respective position on the main chain. The compound contains two methyl groups (CH3) attached to the third carbon atom, denoted as "3,3-dimethyl."
Additionally, there is a methyl group (CH3) attached to the second carbon atom and an ethyl group (CH2CH3) attached to the fourth carbon atom. The name "2-methylbutane" indicates the parent alkane with four carbon atoms, bearing the methyl group on the second carbon atom.
Learn more about IUPAC names here, https://brainly.com/question/28872356
#SPJ11
Convert 5 pounds to kilograms
Help me pleaseeee
Answer:
2.268
Explanation:
5 lb × 0.45359237 = 2.26796185 kg
How to convert Pounds to Kilograms
1 pound (lb) is equal to 0.45359237 kilograms (kg).
1 lb = 0.45359237 kg
The mass m in kilograms (kg) is equal to the mass m in pounds (lb) times 0.45359237:
m(kg) = m(lb) × 0.45359237
Example
Convert 5 lb to kilograms:
m(kg) = 5 lb × 0.45359237 = 2.268 kg
Hope this helped!!!
Answer:
2.26796 kg
Explanation:
Consider the equilibrium of each of the carbonyl compounds with HCN to produce cyanohydrins. Which of the following has the lowest Keq for this reaction? cyclohexanone 0 2-methylcyclohexanone CH3CHO O H2CO
The carbonyl compound with the lowest Keq for the reaction with HCN to produce a cyanohydrin is H₂CO (formaldehyde)
The equilibrium constant (Keq) for the reaction of a carbonyl compound with HCN to produce a cyanohydrin depends on the stability of the resulting cyanohydrin. Generally, more stable cyanohydrins will have higher Keq values.
In this case, we can compare the stability of the cyanohydrins formed from each of the given carbonyl compounds to determine which one has the lowest Keq.
Among the given options:
Cyclohexanone forms a stable cyanohydrin.
2-Methylcyclohexanone forms a cyanohydrin with an additional methyl group, which provides some steric hindrance but still relatively stable.
CH₃CHO (acetaldehyde) forms a cyanohydrin with a smaller alkyl group, making it more reactive but still reasonably stable.
H₂CO (formaldehyde) forms a cyanohydrin with the smallest alkyl group, making it the least stable among the options.
Therefore, the carbonyl compound with the lowest Keq for the reaction with HCN to produce a cyanohydrin is H₂CO (formaldehyde).
To know more about carbonyl compound
https://brainly.com/question/13564853
#SPJ11
Creatine has the structure shown here. Estimate the values of the indicated angles. Bond angle 1= Bond angle 2=
The bond angle 1 of creatine is approximately 120 degrees while bond angle 2 is approximately 180 degrees. These angles are consistent with the expected angles for a trigonal planar and linear arrangement of atoms, respectively. The shape of creatine, determined by these bond angles, is important for its function in the body.
Creatine is an amino acid derivative that occurs naturally in the body. It is made up of three amino acids: arginine, glycine, and methionine. The structure of creatine, including the bond angles, can be determined using computational tools like molecular modelling software. The bond angles in creatine are determined by the arrangement of the atoms around each bond. Bond angle 1 is the angle between the two nitrogen atoms and the central carbon atom. This angle is approximately 120 degrees, which is consistent with the expected angle for a trigonal planar arrangement of atoms.
Bond angle 2 is the angle between the nitrogen atom and the carbon atom in the guanidine group. This angle is approximately 180 degrees, which is consistent with the expected angle for a linear arrangement of atoms. The bond angles in creatine are important because they determine the shape of the molecule, which in turn affects its properties and functions in the body. For example, the shape of creatine allows it to bind to ATP, which is a molecule that provides energy for cellular processes.
In conclusion, the bond angle 1 of creatine is approximately 120 degrees while bond angle 2 is approximately 180 degrees. These angles are consistent with the expected angles for a trigonal planar and linear arrangement of atoms, respectively. The shape of creatine, determined by these bond angles, is important for its function in the body.
know more about creatine
https://brainly.com/question/29479644
#SPJ11
Which bacteria is most problematic in the food industry?
Pathogenic
Hypoallergenic
Biogenic
Environmental
Pathogenic bacteria are the most problematic in the food industry. The term "pathogenic" refers to any bacteria that are capable of causing illness when consumed by humans or animals.
Option A is correct
Pathogenic bacteria are often found in foods that are not cooked or handled correctly. This includes raw meat, unpasteurized dairy products, and foods that are stored at incorrect temperatures for an extended period of time. It is crucial for food industry professionals to follow strict safety protocols to minimize the risk of pathogenic bacteria contaminating their products, leading to foodborne illnesses.Foodborne illnesses can be caused by a variety of microorganisms, including bacteria, viruses, and parasites. Pathogenic bacteria are a significant concern in the food industry, as they can cause serious illness and even death in vulnerable populations such as young children, pregnant women, and the elderly. The most problematic bacteria in the food industry are those that are pathogenic and are capable of multiplying quickly in the food environment. Pathogenic bacteria can cause food poisoning, which is a severe illness that can result in dehydration, fever, vomiting, and diarrhea.
The symptoms can be severe and can lead to hospitalization or even death if left untreated. The most common pathogenic bacteria found in food are Salmonella, Listeria, and E.coli. These bacteria are often found in raw or undercooked meat, unpasteurized dairy products, and fruits and vegetables that are not washed correctly. It is essential for food industry professionals to follow strict safety protocols to prevent the growth and spread of these bacteria. Proper handwashing, storage, and cooking techniques can help minimize the risk of foodborne illnesses caused by pathogenic bacteria. In conclusion, pathogenic bacteria are the most problematic in the food industry. Food safety protocols should be followed to minimize the risk of foodborne illnesses caused by these bacteria.
To know more about Pathogenic bacteria visit:-
https://brainly.com/question/9673295
#SPJ11
Describe, in terms of subatomic particles, what occurs when a person experiences a static “shock”.
Help me plz I’m like slow
Answer:
probably A that's my best guess
Answer:
Hello There!!
Explanation:
The answer is A.H20.This is water which isn't an ionic compound.
hope this helps,have a great day!!
~Pinky~
Br2 + 2LiF → 2LiBr + F2
Given: If 3.6 moles of Br2, react with 9.4 moles of LiF
a) How many moles of F, are produced? I
1 grams F2 to mol = 0.02632 mol
10 grams F2 to mol = 0.26318 mol
20 grams F2 to mol = 0.52636 mol
30 grams F2 to mol = 0.78954 mol
40 grams F2 to mol = 1.05272 mol
50 grams F2 to mol = 1.3159 mol
100 grams F2 to mol = 2.6318 mol
200 grams F2 to mol = 5.2636 mol
120.0 g of 4.0°C water (Specific Heat: 4.184J/g°C) is heated until its temperature is 35°C. Calculate the amount of heat energy needed to cause this rise in temperature?
Answer: I got 15.56
Explanation: I am so sorry if that's wrong but I used the equation Q=m×c×ΔT where
m=mass
ΔT= temp change that occurs
c= specific heat capacity
good luck, again sorry if i totally biffed that
How many possible Mole Ratios are in the following reaction:
ZnO + 2 HCl --> ZnCl2 + H2O
Answer: 2 moles
Explanation:
Hypoxic areas such as in the Gulf of Mexico develop when
A. oxygen levels fall below 5ppm.
B. large amounts of nitrate are added into the water.
C. die-off from a large phytoplankton bloom uses up the oxygen in water.
D. methyl-mercury is added to water.
Hypoxic areas, such as those found in the Gulf of Mexico, develop primarily due to option C: die-off from a large phytoplankton bloom uses up the oxygen in water. The correct option is C.
Phytoplankton blooms occur when there is an excessive growth of microscopic algae in the water, often caused by high nutrient levels, such as nitrogen and phosphorus.
These blooms can create dense layers of algae on the water surface. As the algae die and decompose, bacteria consume the organic matter and consume oxygen in the process, leading to a decrease in oxygen levels in the water.
This process is known as eutrophication, and it can deplete oxygen concentrations to a critical level, resulting in hypoxic conditions.
Oxygen levels below 5ppm (option A) can contribute to hypoxia, but the primary cause is the consumption of oxygen by the decomposition of organic matter from the phytoplankton bloom (option C).
Nitrate additions (option B) and the presence of methyl-mercury (option D) can have additional negative impacts on aquatic ecosystems, but they are not the main drivers of hypoxia in this context. The correct option is C.
To know more about Hypoxia, refer here:
https://brainly.com/question/14570337#
#SPJ11
1. A chemical equation is balanced when *
Answer:1 Answer. A chemical equation is balanced when the number of each kind of atom is the same on both sides of the reaction,,
Answer:
If each side of the equation has the same number of atoms of a given element, that element is balanced. If all elements are balanced, the equation is balanced.
A.) Which metal would you expect to have the highest melting point? Tc, Ag, or Rb
B.) Which metal would you expect to have the highest melting point? Hg, Ba, or Os
the element with highest melting point among Tc, Ag, Rb is Tc that is technetium, while the element which highest melting point among Hg, Os, Ba is Os that is osmium. both of these elements belong to the d block also known as transition elements.
there is no regular trend in the melting point among the d block elements and tungsten is the elements with the highest melting point among the transition elements. the s block elemts on the other hand have relatively low melting points.
Rb and Ba belong to s block thus have lower melting points in comparison to d block elemts like technetium, osmium, silver, and mercury. s block metals are soft and have low melting points due to very week inter-metallic bonding between its atoms.
to know more about transition elements refer to the link below
https://brainly.com/question/30389112
#SPJ4
Which sequence of reactions would allow for the conversion below? ? + y 1) Br2 + 2) HộO* ; 3)xs NaNH, O 1) Br2 : 2) xs NaNH2 : 3) H20 O 1) Bry: 2) H20; 3) xs NaNH2 O 1) xs NaNH2 : 2) Br2 : 3) H20
The correct sequence of reactions to convert the compound "?" to the desired product "y" is: 1) xs NaNH2, 2) Br2, and 3) H2O.
To convert the compound "?"to the desired product "y", the sequence of reactions that would allow for this conversion is:
xs NaNH2 : 2) Br2 : 3) H2O
In the first step, the compound "?" reacts with excess NaNH2 (sodium amide) to generate a nucleophile. NaNH2 is a strong base that can deprotonate acidic hydrogen atoms. This reaction creates a reactive species that can participate in substitution reactions.
Next, in the second step, the compound obtained from the first step reacts with Br2 (bromine). This is a nucleophilic substitution reaction (SN2) where the nucleophile displaces the bromine atom, leading to the formation of an intermediate compound.
Finally, in the third step, the intermediate compound is treated with water (H2O). This hydrolysis reaction helps to convert the intermediate into the desired product "y" by replacing the remaining bromine atom with a hydroxyl group (OH-).
The correct sequence of reactions to convert the compound "?" to the desired product "y" is: 1) xs NaNH2, 2) Br2, and 3) H2O. This sequence involves deprotonation of "?" by NaNH2, nucleophilic substitution with Br2, and hydrolysis with water to achieve the desired conversion.
To know more about SN2 reaction visit:
brainly.com/question/30631335
#SPJ11
Apply Concepts H2O and H2O2 are binary molecular compounds generally known by their common names, “water” and “hydrogen peroxide.” Following the naming conventions you identified for molecular compounds, what would their names be? Explain your reasoning.
A compound that consists of two non-metal elements in its structure and compound is called a binary molecular compound. They can have two different elements in their structures bonded by various bonds like carbon dioxide, sodium chloride etc.
The naming of [tex]\rm H_{2}O[/tex] is dihydrogen oxygen and of [tex]\rm H_{2}O_{2}[/tex] is dihydrogen dioxygen.
How to name binary molecular compounds?[tex]\rm H_{2}O[/tex] is a water molecule and is a binary molecular compound as it has one element of oxygen and other elements of hydrogen. The compound has two hydrogen and one oxygen atom and thus will be named dihydrogen oxygen.[tex]\rm H_{2}O_{2}[/tex] is the peroxide and is a binary molecular compound as it also has hydrogen and oxygen element in its structural formula. The compound has two oxygen and two hydrogen elements in its structure and therefore, will be named dihydrogen dioxygen.Thus, the naming of water is dihydrogen oxygen and hydrogen peroxide is dihydrogen dioxygen.
Learn more about binary molecular compounds here:
https://brainly.com/question/2679241
What is the pH of a solution that has 7.8x10-9 [H+]?
Answer:
8.11
Explanation:
pH = -log[H+]
pH = -log[7.8 x [tex]10^{-9}[/tex]]
pH = 8.107905...
pH = 8.11
Explain why most inorganic substances do not burn, yet organic substances will
burn.
Most inorganic substances do not burn because they do to contain carbon. Organic substances do contain carbon.
How does nuclear fission of Uranium - 234 result in electricity being generated?
Answer:
See explanation
Explanation:
The use of Uranium - 234 to generate electricity depends on a fission reaction. The uranium nuclide is bombarded by fast moving neutrons leading to a chain reaction. Control rods and moderators are used to keep the nuclear reaction under control.
As the nuclear reaction proceeds, heat is generated and steam is consequently produced. This steam is used to turn a turbine and electricity is thereby generated.
Choose an equation for the autoionization of water.
a) H2O(l)⇌H3O+(aq)+OH−(aq)
b) 2H2O(l)⇌H3O+(aq)+2OH−(aq)
c) 2H2O(l)⇌H3O+(aq)+OH−(aq)
d) H3O+(aq)+OH−(aq)⇌H2O(l)
The equation for the autoionization of water is H₂O(l) ⇌ H₃O⁺(aq) + OH⁻(aq), hence option A is correct.
A proton is moved from one water molecule to another during the autoionization of water, resulting in the formation of the hydronium ion ([H₃O⁺) and the hydroxide ion (OH). Kw is the water's autoionization constant, and [H₃O⁺][OH⁻] is the equilibrium expression for this process.
A substance's capacity to interact with itself to produce ions is known as autoionization. [H₃O⁺ and OH⁻ ions are created when a water molecule interacts with another one.
These ions are present in trace concentrations in pure water and have an impact on its chemistry.
Learn more about autoionization, here:
https://brainly.com/question/27548797
#SPJ1
An example of a material that is excluded from the Right to Know Law is:
A. Professional cleaning products
B. "Liquid Paper" correction fluid
C. Carbon tetrachloride 2000
D. All of the above
The Right to Know Law is a law that mandates access to information held by the government. It applies to all states and localities in the United States. However, there are exceptions to this rule. In addition to public safety and privacy concerns, there is a category of information that is explicitly excluded from the Right to Know Law. (a) A professional cleaning product is an example of a material that is excluded from the Right to Know Law.
As per the given options, a professional cleaning product is an example of a material that is excluded from the Right to Know Law. In 1984, the federal government amended the Right to Know Law to require businesses to provide information about hazardous chemicals in the workplace to employees. This law, known as the Hazard Communication Standard (HCS), requires employers to make information about hazardous chemicals available to employees in the form of Safety Data Sheets (SDSs) and labels.The HCS applies to all employers with hazardous chemicals in their workplace and requires them to provide their employees with 100-word descriptions of the hazards associated with those chemicals, as well as information on how to protect themselves from exposure. Therefore, a professional cleaning product is an example of a material that is excluded from the Right to Know Law.
To know more about Right to Know Law visit:
https://brainly.com/question/32368201
#SPJ11
Which two elements are most likely good conductors of
electricity?
A. C and P
B. Zn and N
C. Si and Ne
D. Ag and Au
In an acid-base reaction involving neutral base B, what will be the conjugate acid Select the correct answer below , a. h20 b. H30 c. Oh- d hb+
In an acid-base reaction involving a neutral base B, the conjugate acid will be H₃O⁺. Option B is correct.
In an acid-base reaction involving a neutral base B, the conjugate acid will be formed by the addition of a proton (H⁺) to the base.
H₂O; Water (H₂O) is not a base but can act as an acid in certain reactions. It can donate a proton to form the hydroxide ion (OH⁻), making it a conjugate base rather than a conjugate acid.
H₃O⁺; The hydronium ion (H₃O⁺) is formed when a proton (H⁺) is added to water (H₂O). It is commonly found in aqueous acidic solutions and can act as an acid by donating a proton. Therefore, H₃O⁺ is the correct answer as it represents the conjugate acid in this acid-base reaction.
OH⁻; The hydroxide ion (OH⁻) is a base, not an acid. It accepts a proton (H⁺) to form water (H₂O) in basic solutions. OH⁻ would be the conjugate base, not the conjugate acid.
Hence, B. is the correct option.
To know more about conjugate acid here
https://brainly.com/question/8908134
#SPJ4
--The given question is incorrect, the correct question is
"In an acid-base reaction involving neutral base B, what will be the conjugate acid Select the correct answer below , A) H₂O B). H₃0 C). OH⁻."--
In the water cycle, clouds form as a result of A. Precipitation. B. Transportation. C. Evaporation. D. Condensation. Please HELPPPP. 15 PIONTS!!!!¡!
Answer: D. Condensation
Explanation: because condensation happens when water vapor cools and turns into clouds
What is true of an Arrhenius base?
O A. An Arrhenius base produces OH" ions.
O B. An Arrhenius base accepts OH ions.
O c. An Arrhenius base accepts H+ ions.
O D. An Arrhenius base produces H+ ions.
Answer:
produce OH-
Explanation:
Question 1. A sample of Glc is synthesized so that carbon 1(C−1) is isotopically labeled with radioactive
14
C. This radioactive Glc ∗is fed into the glycolysis pathway. Where does the
When a sample of Glc is synthesized, carbon 1(C−1) is isotopically labeled with radioactive 14C. This radioactive Glc ∗is fed into the glycolysis pathway and the carbon 1(C−1) is then oxidized to generate two molecules of pyruvate. The pyruvate produced from the radioactive glucose is also radioactive, as it contains a carbon atom that was labeled with 14C.
The fate of the 14C-labeled carbons can be determined by measuring the amount of radioactivity in different compounds at various time points during glycolysis. This can be achieved by performing a series of experiments in which the radioactive glucose is added to a cell culture, and samples are taken at different time points to measure the amount of radioactivity in various compounds. For example, one might measure the amount of radioactivity in pyruvate, lactate, or CO2, among other things. The experiments might also be done using an animal model, such as a mouse, to examine the fate of the labeled carbons in vivo.Overall, using radioactive Glc is a powerful tool for studying metabolic pathways such as glycolysis, as it allows researchers to track the fate of specific carbon atoms throughout the pathway.
To know more about radioactive Glc visit:
https://brainly.com/question/1770619
#SPJ11
a solution made by adding 29.0 l of kno3 to 512 l of water has what percent volume of kno3?
To find the percent volume of KNO3 in the solution, we need to compare the volume of KNO3 to the total volume of the solution.
The initial volume of the solution is 512 liters of water. When we add 29.0 liters of KNO3 to it, the total volume of the solution becomes 512 + 29.0 = 541.0 liters.
Now, to calculate the percent volume of KNO3, we divide the volume of KNO3 (29.0 liters) by the total volume of the solution (541.0 liters) and multiply by 100:
Percent volume of KNO3 = (29.0 / 541.0) * 100 ≈ 5.36%
Therefore, the solution made by adding 29.0 liters of KNO3 to 512 liters of water has approximately 5.36% volume of KNO3.
Learn more about percent volume here : brainly.com/question/15461083
#SPJ11
Which formula demonstrates a double replacement reaction?
1. A + B --> AB
2. AB + CD --> AC + BD
3. AB --> A + B
4. A + BC --> AC + B
Answer:
2
Explanation:
Decomposition of potassium chlorate are performed in the lab to make oxygen. You are strictly advised to be careful with it. Why is that, what might happen?