Answers
Answer:
Acceleration Of B IS greater
Explanation:
F= mass x accelerarion
Acceleration of ( A) =20÷5 =4
Acceleration of (B) =5
Related Questions
Your friend sits on a 25.0L exercise ball, squishing the ball so that it is only 17.5L. What is the pressure inside the ball if the outside air pressure is 100. kPa?
Use the Boyle's Law equation to determine the answer.
Answers
Answer:
b
Explanation: because i took the test and got a 100
What is the percent composition (by mass) of MgBr2?
Answers
Answer:
13.2% Mg, 86.8% Br
Explanation:
Mg has a molar mass of 24.31g/mol.
Bromine has a molar mass of 79.90 g/mol.
There is one mole of Mg and two moles of Br in the compound:
79.90x2 + 24.31 = 184.11
So the total molar mass of MgBr2 is 184.11.
A percent tells us a part of a whole, so we will divide each part of the mass into the whole mass.
24.31g Mg / 184.11g MgBr2 = .132
159.8g Br / 184.11g MgBr2 = .868
Multiply these decimals by 100 to make them into a percent.
.132 x 100 = 13.2% Mg
.868 x 100 = 86.8% Br
Carbon dioxide and oxygen are both ___ found in the air.
Answers
Answer:
gases
Explanation:
Answer:
the Carbondioxed and oxygen are both a gass found in the air
A sample of oxygen gas occupies a volume of 229.5 mL at 762.7 torr pressure. What volume in mL will it occupy at 704.5 torr pressure?
Answers
Answer:
248.4 mL
Explanation:
In order to answer this problem we can use Boyle's law, which states that at a constant composition:
P₁V₁ = P₂V₂Where in this case:
P₁ = 762.7 torrV₁ = 229.5 mLP₂ = 704.5 torrV₂ = ?We input the data:
762.7 torr * 229.5 mL = 704.5 torr * V₂And solve for V₂:
V₂ = 248.4 mLPlants and animals both use the process of _____ to release stored energy.
Answers
Answer:
The sun.
Explanation:
Sun is the ultimate source of energy. All living things on the earth using the energy comes from the sunlight.
Plants using sunlight to fuel the process of photosynthesis. Photosynthesis is the process of transforming of water and carbon dioxide to oxygen and glucose. The amount of energy used to drive the photosynthesis process is stored in the glucose molecules.
Organism feed on plants and breaking down the glucose molecules to release the stored energy. The release energy is utilized by the cells present in the organisms.
Autotrophs also have the ability to make their own food, so they are also using the energy from the sun to make their food.
Which option correctly orders the elements by increasing reactivity?
Hint: Review your periodic table.
Na < Li < K
Na < Li < K, ,
K < Na < Li
K < Na < Li, ,
Li < Na < K
Li < Na < K, ,
Na < K < Li
Answers
Answer: Li < Na < K is the answer
Explanation:
I need help no links please
Answers
Answer:
A. We still feel gravity because of inertia, which occurs all around us. Gravity is not felt as much because although it feels small, gravity is the attraction that keeps objects on Earth.
B. This is due to a field and a law, which states that opposites attract and like repel.
Help plzzZZZZ I really need help with this
Answers
Based on what you have learned about the units for measuring thermal energy, complete the following passage.
The unit often used in chemistry and physics to measure energy, such as for work or electrical current, is the
. We can also use this unit, as we did in this lab, for measuring
. This is a property that is quantified by the energy needed per
of material to raise the temperature by one
. The unit for this measure is therefore
.
Answers
Answer:
1.joule 2.specific heat 3.gram 4.degree Celsius 5.J/g°CExplanation:
I did the lab
Thermal energy is represented in the units joules J. It is the energy needed to raise the temperature by one degree celsius.Per gram this energy is called as specific heat capacity with the unit J/°Cmol.
What is heat capacity?Heat capacity of a substance is the heat energy required to raise the temperature of the substance by one degree celsius.
If the heat capacity is measure per one mole of a substance it is called specific heat capacity. It is an intensive property whereas heat capacity is an extensive property.
The given passage can be completed as follows:
The unit often used in chemistry and physics to measure energy, such as for work or electrical current, is Joule (J). We can also use this unit, as we did in this lab, for measuring heat capacity.
This is a property that is quantified by the energy needed per one gram of material to raise the temperature by one degree celsius.The unit for this measure is therefore J/°Cg.
To find more about heat capacity, refer the link below:
https://brainly.com/question/28921175
#SPJ2
live in a variety of places (with oxygen, without oxygen, extreme
hot, extreme cold). *
A bacteria
B virus
C fungus
D parasite
Answers
Answer:
A Bacteria
Explanation:
What processes contribute water to surface water sources?(science)
Answers
science:my chosen place is bonifacio global city
i choose this place because?
Answers
Answer:
Rewrite the following sentence in reported speech
The chair person said,"A hearty welcome to all present!"
Find the final product for: Li + Br and show work.
Answers
Lithium is atomic number 3, so it has valency 1
While, Bromine is atomic number 35, and has valency 1
Lithium has an extra electron while Bromine need an electron, since they both need and have one electron, the form
LiBr (Lithium Bromide) where Li is +ve charged and Br is -ve charged
Happy to help :)
What is defined as the plants and animals and the physical surroundings, including the sun, air, soil, and water?
Answers
Answer:
Ecosystem
Explanation:
The answer is ecosystem because the ecosystem includes the community such as living things and the enviornment of nonliving things such as the sun!
Answer:
ecosystem I'm pretty sure
What is one way that the kidneys help maintain homeostasis in the body?
A They regulate the temperature of the body
B They regulate the distribution of energy in the body
C They regulate the amount of oxygen in the body
D They regulate the amount of water in the body
Answers
Answer:
they regulate the amount of water in the body.
Explanation:
The kidneys help maintain homeostasis by regulating the concentration and volume of body fluids. For example, the amount of H+ and HCO3 - secreted by the kidneys controls the body's pH.
ASAP EASYYYY!!!!!!!!
List three household products that should go to a secure landfill site instead of regular sanitary landfill.
Answers
Answer:
A 0.60 mol sample of PCl 3 (g) and a 0.70 mol sample of Cl 2 (g) are placed in a previously evacuated 1.0 L container, and the reaction represented
Explanation:
CAN SOMEONE PLEASE HELP ME ??!!!!!!
Our garbage disposal techniques have changed over time. Describe two ways that a “garbage dump” from the past would differ from a more modern sanitary landfill site
Answers
Answer:
The Resource Conservation and Recovery Act (RCRA; PL 94-580), the major federal law on waste disposal, was passed in 1976. Its primary goal was to "protect human health and the environment from the potential hazards of waste disposal." RCRA is also concerned with reducing the amount of waste generated, ensuring that wastes are managed properly, and conserving natural resources and energy. The RCRA regulates solid waste, hazardous waste, and underground storage tanks
Explanation:
HELP PLZ ILL GIVE BRAINLIEST
Answers
To begin, check that Reaction 1 and Forward are selected. In this reaction, hydrogen (H2) and oxygen (O2) react to form water (H2O). The reaction takes place inside a device called a calorimeter. Inside the calorimeter, a small chamber holds the reactants. The rest of the calorimeter is filled with water. Click Play (). What happens?
Answers
Answer:
The reaction occurs and all H2 and O2 unite to form H20
PLEASE ANSWER QUICKLY
Which are characteristics of arthropods? Check all that apply.
radial symmetry
nervous system
asexual reproduction
segmented body
open circulatory system
Answers
Answer: I say its Segmented body and radial symmetry im not sure if it is right
Explanation:
Answer:
B. Nervous system
D. Segmented body
E. Open circulatory system
Explanation:
Hope this helps!
Have a nice dayy! :)
What is the speed of a bird that flies 25 meters in 25 minutes?
Answers
Answer:
1mpm(1 meters per minute) Explanation: Speed:Distance/time 25/25=1 plz mark as brainliest
Answer:
1mpm(1 meters per minute)
If 190dm of hydrogen gas collected at 20°c and 760mmHg .Calculate it's volume at stp (standard pressure=760mmHg
Answers
Answer:
177.1 L
Explanation:
The excersise can be solved, by the Ideal Gases Law.
P . V = n . R . T
In first step we need to determine the moles of gas:
We convert T° from, C° to K → 20°C + 273 = 293K
We convert P from mmHg to atm → 760 mmHg = 1atm
1Dm³ = 1L → 190L
We replace: 190 L . 1 atm = n . 0.082 . 293K
(190L.atm) / 0.082 . 293K = 7.91 moles.
We replace equation at STP conditions (1 atm and 273K)
V = (n . R .T) / P
V = (7.91 mol . 0.082 . 273K) / 1atm = 177.1 L
We can also make a rule of three:
At STP conditions 1 mol of gas occupies 22.4L
Then, 7.91 moles will be contained at (7.91 . 22.4) /1 = 177.1L
10 moles of potassium hydroxide in 5.16 L of solution
Answers
Answer:
The molarity is 8.52M
Explanation:
molality = moles of solute/kg of solvent = 5.2mol/kg
moles of solute = 5.2mole
mass of solute = moles of solute × MW = 5.2 × 56.106 = 291.8g
mass of solvent = 1kg = 1000g
Mass of solution = mass of solute + mass of solvent = 291.8g + 1000g = 1291.8g
Density of KOH = 2120g/L
Volume of solution = mass/density = 1291.8/2120 = 0.61L
Molarity = number of moles of solute/volume of solution = 5.2/0.61 = 8.52M
The concentration in the solution is 1.94 mol/L
From the question,
We are to determine the concentration of 10 moles of potassium hydroxide in 5.16 L of solution.
From the formula
Number of moles = Concentration × Volume
Then, we can write that
[tex]Concentration = \frac{Number\ of\ moles}{Volume}[/tex]
From the question,
Number of moles of potassium hydroxide (KOH) = 10 moles
Volume of solution = 5.16 L
∴ Concentration of the solution = [tex]\frac{10}{5.16}[/tex]
Concentration of the solution = 1.94 mol/L
Hence, the concentration in the solution is 1.94 mol/L
Learn more here: https://brainly.com/question/19196652
Here is the complete question:
Calculate the concentration in each of the following solutions:
1. 10 moles of potassium hydroxide in 5.16 L of solution
5 Protons {+}
5 Electrons {-}
6 Neutrons {0}
What element is this ?
Answers
Answer:boron
Explanation:
For a solution, [H+] = 1 x 10-2M.
What is the pH?
Answers
Answer:
pH=2
Explanation:
-log(1 x 10-2)=2
Ayúdenme por favor
Please help me
Answers
2H2+O2===>2H2O
N2+3H2==>2NH3
C3H8+5O2==>4H20+3CO2
CH4+2O2===>CO2+2H2O
2HBr +Fe==>FeBr2 +H2
I hope it helped
What is the atomic number of an atom? Why is this number important?
Answers
The number of protons in an atom is called its atomic number. This number is very important because it is unique for atoms of a given element. All atoms of an element have the same number of protons, and every element has a different number of protons in its atoms
I need help!
And please give me an ACTUAL answer and not random spam words please!
Thanks!
What is[OH-] of a solution
with a pH of 11.3?
Answer in M
Answers
Answer:
2 ×10^-3
Explanation:
pH + pOH = 14
pOH = 14-11.3 = 2.7
[OH-] = 10^-pOH = 10^-2.7 = 2×10^-3 M
A sample of an unknown liquid has a volume of 12.0 mL and a mass of 6 g. What is its density?
A. 2 g/cm3
B. 0.5 g/cm
C. 5.0 g/cm3
D. 0.2 g/cm3
Answers
[tex]\large \mathfrak{Solution : }[/tex]
volume = 12 ml = 0.012 litres = 0.012 cm³
mass = 6 g
And the relationship between mass, volume and density can be depicted by :
[tex] \boxed{density = \dfrac{mass}{volume} }[/tex][tex]density = \dfrac{6}{0.012} [/tex][tex]density = \dfrac{6000}{12} [/tex][tex]density = 500 \: \: g/cm {}^{3} [/tex]therefore, density = 500 g/cm³
21.82 L of 4.65 M HCl is added to 9.31 L of 8.55 M NaOH. What is the concentration of HCl in the resulting solution? **hint: make ICE table
A)1.90 M
B)0.952 M
C)10.3 M
D)0.702 M
E)0.644 M
Answers
Answer:
D
Explanation:
First you multiply 4.65 with 21.82 to get the mols of hcl, which is 101.463. Then you make an ice table. The ice table should look like this:
HCl + NaOH = 12NaCl + H2O
101.463 6.022e23 1.989e30
As the ice table above shows, you will have 1.989e30 mols of nacl after the reaction. With that information, you can then divide it by 2.833333333333333e30 to get 0.702 M.