The Lewis dot structure of Mg2+ look like zero pair of electrons
Lone pair: what are they?
The electrons in a lone pair are those who did not participate in any chemical reactions. Any molecule's single electron pair is represented by the following.
Any atom's lone pair of electrons= (Valence electrons - the number of electrons the atom shares) / 2.
Two electrons are lost from the magnesium atom, creating the magnesium ion, or Mg2+.
Mg has the electrical configuration 1s2 2s2 2p6 3s2 and Mg2+ has the configuration 1s2 2s2 2p6.
In the K and L shells of Mg2+, there are only 10 electrons each. The Lewis structure of Mg2+ reveals that the magnesium ion does not contain a lone pair of electrons.
To learn more about lone pairs from the given link
https://brainly.com/question/19739294
#SPJ4
EXPERIMENT: USING THE TYNDALL EFFECT TO IDENTIFY COLLOIDS
These supplies are needed:
3 clear glasses with smooth sides
laser pointer or flashlight
red Jell-O
red food coloring
sugar
water
Procedure:
Using the regular recipe, mix up the Jell-O and fill one glass with the mixture. Let chill until it gels. Fill another glass with water and let settle until the air bubbles disperse. Fill the third glass with water and add 2 drops of food coloring and two tablespoons of sugar into the water in the third glass. Stir until you are sure the sugar is completely dissolved.
When all three glasses are ready, line them up in any order and shine the laser (or flashlight) through all three glasses at the same time.
Answer these questions:
What did you observe?
What is the Tyndall effect?
Which glass displayed the Tyndall effect?
What does that tell you about the substance in the glass?
Which glass represents a pure substance?
Which glass represents a solution?
The glass with Jell-O is a colloid, the glass with plain water is a pure substance, and the glass with sugar and red food coloring is a solution.
What I observed is that the light was scattered more in the glass with the Jell-O mixture and the glass with the sugar water. The light was not scattered in the glass with just plain water.
The Tyndall effect is the scattering of light by particles in a colloid or fine suspension.
The glass with the Jell-O mixture displayed the Tyndall effect. This tells me that the substance in the glass is a colloid.
The glass with just plain water represents a pure substance.
Therefore, the glass with the sugar water and food color represents a solution. The glass with the Jell-O mixture represents a colloid.
To know more about suspension, click below:
https://brainly.com/question/1024645
#SPJ1
Rubber is considered a(n) _______
solid because it does not melt at a distinct temperature
Answer: amorphous
Explanation:
Amorphous solids don't have an organized structure and therefore don't have a definite melting point. They slowly soften and melt as the temperature increases.
In the calvin cycle, if nadph begins to run out, what would be the first compound to accumulate?.
The first compound to accumulate is 1,3-bisphosphoglycerate.
Carboxylation is step one within the Calvin cycle where carbon dioxide is bonded to a five-carbon sugar called RuPB. though it is known as the darkish response the Calvin cycle does not surely occur within the darkish or all through the nighttime time. that is because the procedure requires NADPH, which is short-lived and is derived from light-structured reactions.
The reactions of the Calvin cycle add carbon to an easy 5-carbon molecule referred to as RuBP. these reactions use chemical energy from NADPH and ATP that have been produced in the light reactions. The very last manufactured from the Calvin cycle is glucose. The Calvin cycle reactions may be organized into 3 simple degrees fixation discount and regeneration.
Learn more about The Calvin cycle here:-https://brainly.com/question/14145723
#SPJ4
difference between the paper chromatography and chromatography
Answer:
Paper chromatography requires less preparation, whereas thin layer chromatography requires more preparation time. The stationary phase of paper chromatography is the water trapped in the cellulose filter paper. The stationary phase of the thin layer chromatography is the glass plates coated with silica gel.
Explanation:
A resource is being used by a population.
Which graph represents a rapidly diminishing resource?
Responses
Graph A
Graph A
Graph B
Graph B
Graph C
Graph C
Graph D
Graph D
Answer:
Graph A.
Explanation:
Graph
It represents a constant function
Answer:
graph c
Explanation:
When 0. 485 g of compound x is burned completely in a bomb calorimeter containing 3000 g of water, a temperature rise of 0. 285°c is observed. What is δu of the reaction for the combustion of compound x? the hardware component of the calorimeter has a heat capacity of 3. 81 kj/°c. The specific heat of water is 4. 184 j/g·°c, and the mw of x is 56. 0 g/mol.
ΔU of the reaction the combustion of compound x is -538 kJ/mol
Combustion is a reaction in which a substance reacts with oxygen gas and releasing energy in the form of light and heat
Here given data is
Mass of compound x = 0.485gram
Mass of water = 3000gram
Temprature rise = 0. 285°C
Heat capacity of the calorimeter = 3. 81 kJ/°C
Specific heat of water = 4. 184 J/g·°C
MW of x = 56. 0 g/mol
Then calculate q
ΔU = ΔH -PΔV
The bomb calorimeter has a constant volume ΔV = 0
ΔU = ΔH
q reaction = q(water + q(bomb)
q(bomb) = 3810J/°C×0.285 = 1085.85J
q(water) = 3000g × 4. 184 J/g·°C×0.285°C = 3577.32 J
q reaction = q(water) + q(bomb)
q reaction = 4663.17 J = 4.66kJ means this is an exothermic
Then calculate moles of compound
Moles = mass/molar mass
Moles = 0.485 g/56.0g/mol
Moles = 0.00866 moles
Then calculate ΔU
ΔU = 4663.17 J/0.00866 moles = 538472 j/mol = 538.5kJ/mol means the reaction is exothermic
ΔU = -538kJ/mol
Know more about combustion
https://brainly.com/question/14018259
#SPJ1
8. Draw the lewis dot diagram for the following electron configuration
1s² 2s² 2p 3s² 3p6 4s²3d¹d 4p5
Answer:
Bromine has 7 electrons but to complete the octet you add one more electron so it has a net charge of 1-
Explanation:
a bomb calorimeter has a heat capacity of 2.47 kj/k. when a 0.106-g sample of a certain hydrocarbon was burned in this calorimeter, the temperature increased by 2.14 k. calculate the energy of combustion for 1 g of the hydrocarbon.
The energy of combustion for 1 gm of the hydrocarbon is 0.56 kJ
What is a bomb calorimeter?
Bomb Calorimeter is a constant-volume calorimeter which measures the heat of a particular reaction or measures the calorific value of the fuels. They can withstand large pressure produced within the calorimeter due to the reaction or burning of fuel.
The above question can be solved by
Energy of combustion = m X c X ΔT
m = mass of hydrocarbon burnt ,
c = heat capacity of calorimeter ,
ΔT = temperature change
Energy of combustion = 0.106g X 2.47kJ/K X 2.14K = 0.56kJ
Energy of combustion when 1g of hydrocarbon is burnt = (0.56kJ / 0.106g ) X 1g = 5.28kJ
Hence, The energy of combustion for 1 gm of the hydrocarbon is 0.56 kJ
To know more about Bomb Calorimeter from the given link
https://brainly.com/question/15774422
#SPJ4
Create an energy transformation for using a flashlight to see in the dark. Ex: Electrical to Sound
In order to use a flashlight to see in the dark, the flashlight must first transform the electrical energy it receives from batteries into light energy.
What is flashlight?
A portable hand-held electric lamp is known as a torch (UK, Australia), or a flashlight (US, Canada). The light source used to typically be a tiny incandescent light bulb, but since the mid-2000s, light-emitting diodes (LEDs) have taken their place. A typical flashlight is made up of a light source mounted inside a reflector, a transparent cover to shield the light source as well as reflector, a battery, a switch, and sometimes a lens. All of these components are housed in a case. Around 1899, the development of dry cells and tiny incandescent electric lamps made the first battery-operated flashlights feasible. Today's flashlights run on disposable as well as rechargeable batteries and mostly use light-emitting diodes. Some require the user to turn a crank, shake the lamp, or squeeze it in order to operate. Some batteries can be recharged using solar panels.
In order to use a flashlight to see in the dark, the flashlight must first transform the electrical energy it receives from batteries into light energy. This light energy is then emitted from the flashlight in a concentrated beam, which illuminates the area in front of the person using the flashlight and allows them to see in the dark.
To learn more about flashlight
https://brainly.com/question/879842
#SPJ1
Assume you are performing the calibration step of experiment 8 and you begin with 30 g of water at 20 oc and 30 g of water at 80 oc. After adding the two portions of water into your calorimeter setup and following the procedure outlined in the experiment, you determine the temperature of the mixed portions of water to be 45 oc. What is the heat capacity of the calorimeter?.
The heat capacity of calorimeter is 133.76 J/c.
What is calorimeter?
A calorimeter is a device used in calorimetry, a procedure for calculating heat capacity and trying to measure the heat of chemical reactions or even other physical changes. Among the most popular kinds are dsc calorimeters, isothermal micro calorimeters, titrimetric calorimeters, and accelerated rate calorimeters. A straightforward calorimeter is just a metal container with a thermometer suspended beyond a combustion chamber. It's one of the measurement tools used in the research of chemistry, biochemistry, and thermodynamics. The two substances A and B are separately added to a calorimeter, and the original and final temperatures are recorded, in order to determine the enthalpy change per mole of substance A in a reaction between those two substances.
We know:
mw Cw Ow = mc Cc delOc + Ccal delc
80g * 4.18/gc * (80-45)C = 80g * 4.18J/g * (45-20) + Ccal *(45-20)
= 11704J = 8360 + Ccal (25)
= 133.76 j/c
To learn more about calorimeter from the given link
https://brainly.com/question/1407669
#SPJ4
How can you tell if a compound is covalent by looking at the name?
There will be numerical prefixes.
There will be a metal.
There's no way to tell.
There will be roman numerals.
Answer:
Explanation:
chemical A has a mass of 5 grams and chemical B has a mass of 10 grams. if two chemicals are mixed and a complete chemical reaction occurs what is the total mass of the products
The mass of the products when 5g of a chemical A is combined with 5g of chemical B is 10g.
What is law of conservation of mass?The law of conservation of mass is a law of classical physics that states that the total mass of a closed system remains constant regardless of the chemical or physical changes that take place within it.
The law explains that a mass in an isolated system can neither be created nor be destroyed but can be transformed from one form to another”.
This means that in a chemical reaction, the mass of the reactants must be equal to the mass of the products.
According to this question, chemical A has a mass of 5 grams and chemical B has a mass of 10 grams. If these two chemicals are mixed and a complete chemical reaction occurs, the total mass of the products in accordance with the law of conservation of mass is 5g + 5g = 10 grams.
Learn more about law of conservation of mass at: https://brainly.com/question/13383562
#SPJ1
each element possesses unique chemical and physical properties. truefalse
True each element possesses unique physical and chemical properties.
An element's properties are based on its atomic numbers, atomic masses, and electron configurations. An element is a pure substance consisting of only one type of atom which all have the same number of protons in their nuclei. A substance whose atoms all contain the same number of protons is said to be an element; alternatively, all the atoms of a particular element must contain the same number of protons. Chemical reactions cannot degrade elements because they are the simplest chemical forms. The two main classes of elements are metals and non-metals.
To know more about elements click here:
https://brainly.com/question/5279907
#SPJ4
which results in a higher vapor pressure? a) stronger intermolecular forces b) weaker intermolecular forces
Substances with weak intermolecular forces will have higher vapor pressure
Vapor pressure is the measure of the tendency of a material to change into the gaseous or vapor state, and it increases with temperature. So, the temperature at which the vapor pressure at the surface of a liquid becomes equal to the pressure exerted by the surroundings is called the boiling point of the liquid. Or we can simply say that the when a liquid is boiling its vapor pressure is equal to the external pressure.
In the above given case we are comparing the intermolecular forces and understanding the concept of vapor pressure. So, vapor pressure of liquid is said to be inversely proportional to the intermolecular forces between the atoms of the liquid. This relation means that if the liquid has stronger intermolecular forces than the rate of evaporation of liquid will be very low and hence it causes lower vapor pressure.
But whereas if the intermolecular forces are weaker then the rate of evaporation of the liquid will be high and therefore it vaporizes fast which results in higher vapor pressure.
To know more about vapor pressure
https://brainly.com/question/24161601
#SPJ4
vapor pressure will increase with:
Vapor pressure will increase with Temperature.
What does vapor pressure mean exactly?
The vapor pressure of a liquid is the pressure at which a vapor and its liquid (or solid) are at equilibrium, or the pressure at which a sample of a liquid (or solid) evaporates in a closed container to produce a vapor.
Vapor pressure for liquids is influenced by the following variables: Intermolecular Force and Temperature
The molecules of a liquid begin to move more quickly as the temperature rises. More vapor pressure is produced as a result of the production of gas. As a result, vapor pressure and temperature are directly related. The related graph will be a straight line graph since temperature and vapor pressure are directly proportional to one another.
Hence, Vapor pressure will increase with Temperature.
To learn more about vapor pressure from the given link
https://brainly.com/question/25863019
#SPJ4
Which isomer of 1-bromo-3-tert-butylcyclohexane reacts faster when refluxed with potassium tert-butoxide?.
Trans isomer of 1-bromo-3-tert-butylcyclohexane reacts faster when refluxed with potassium tert-butoxide
Structural isomers are those isomers in which the atoms are completely arranged in a different order but they have the same molecular formulas. These are the molecules having the same kind of molecular formula with different connectivity which is completely depending upon the order they are put together.
Cis isomers are molecules with the same connectivity of atoms. They feature that the same side priority groups are placed on the same side of a double bond. Trans isomers feature molecules with same side priority groups placed on opposite sides of a double bond.
In the above given question the trans isomer of 1-bromo-3-tert-butylcyclohexane reacts faster when refluxed with potassium tert-butoxide, because in trans isomer there is less steric hindrance and therefore it can react easily, where as the cis isomer is having a lot of steric hindrance
To know more about isomers
https://brainly.com/question/13422357
#SPJ4
How do two repelling magnets demonstrate that objects that are not in contact exert forces on each other?
Answer:
If you placed the two magnets so that opposite poles are facing each other, the force will be attractive and you will need to add more mass to the opposite side of the scale Magnetic attraction and repulsion is one of three fundamental non contact forces in nature
If there’s a attraction it comes towards one on other if there repulsion the opposite happens.
Explanation:
A student is reacting magnesium and hydrochloric acid by placing a strip of Mg
metal into a beaker containing HCL solution. Which of the following would
increase the rate of reaction between the Mg and the HCL?
removing some of the HCL solution from the beaker
freezing the Mg strip before adding it to the beaker
cutting the Mg strip into smaller pieces
adding less HCl to the initial solution
For the student who is reacting magnesium and hydrochloric acid by placing a strip of Mg metal into a beaker containing HCl solution, the rate of reaction between the Mg and the HCl will be increased by:
cutting the Mg strip into smaller pieces; option CWhat is the rate of a chemical reaction?The rate of a chemical reaction is the rate at which the reactant molecule is converted or the rate at which product molecules are formed.
Mathematically;
Reaction rate = mole of reactants converted or mole of product formed / time takenThe factors that affect the rate of a reaction are:
temperaturepressureconcentrationpresence of a catalystthe surface area of the reactants - reaction rate increases with an increase in the surface area of the reactantsIn the given reaction, the surface area of the reactants can be increased by cutting the magnesium metal strips into smaller pieces thus, increasing the reaction rate.
Learn more about reaction rate at: https://brainly.com/question/24795637
#SPJ1
Answer:
It C smh smh
Explanation:
Usatest prep and expert explanation
find the percent by mass of sodium chloride in a 1.45 m nacl solution. the density of the solution is 1.07 g/ml .
6.616% of sodium chloride is present in solution as a mass percent.
What benefits does chloride provide the body?An example of an electrolyte is chloride. It functions with additional electrolytes like sodium, potassium, & carbon dioxide (CO2). These compounds support the maintenance of the body's hydrochloric balance and correct fluid balance.
What does chloride in a blood test mean?One of the elements in your blood is chloride. Chloride blood tests determine whether you have healthy amounts of chlorine in your blood. Dehydration, vomiting, and other medical disorders are just a few of the many things that can lead to an abnormally high quantity of sodium in your blood.
To know more about Chloride visit:
https://brainly.com/question/13211879
#SPJ4
Why do you believe knowing how elements and compounds react together is essential in everyday matters?
Some elements are more "reactive" than other elements; why do you think this is?
It is very important to know how elements and compounds react together because everything that surrounds us is made out of elements and compounds. Therefore, understanding how these work can allow us to have a better understanding of the world that surrounds us. Moreover, it can avoid accidents when we deal with dangerous compounds, such as when we cook or clean.
Some elements are more "reactive" than other elements because the number of electrons in the outermost shell of the atom is greater that that of others.
What are elements?A chemical element is a species of atoms that have a given number of protons in their nuclei, including the pure substance consisting only of that species.
The known elements have certain properties that helps in their identification .Those properties include but are not limited to the following:
elements has conductivity, elements has magnetism, elements has melting point, elements has boiling point, elements has color, elements has state of matter etc.Learn more about elements at: https://brainly.com/question/20096027
#SPJ1
Answer:
it is very important to know how elements and compounds react together because everything that surrounds us is made out of elements and compounds. Therefore, understanding how these work can allow us to have a better understanding of the world that surrounds us. Moreover, it can avoid accidents when we deal with dangerous compounds, such as when we cook or clean.
Explanation:
If you pour hot soup into a bowl, and the bowl stays cool to the touch, you can assume that
A
the bowl is a good insulator of heat.
B
the bowl is a good conductor of heat.
C
the bowl’s temperature cannot be measured.
D
the bowl transfers most of its heat through radiation.
Which geologic law has igneous inclusions?
Answer:
James Hutton described the Law of Inclusions, which states that if one rock body (Rock B) contains fragments from another rock body (Rock A), then Rock B must be younger than the bits of rock it has.Garnets commonly contain many inclusions
True or false: a scientific law is different from a scientific theory because it describes something in nature without attempting to explain it
A scientific law is different from a scientific theory because it describes something in nature without attempting to explain it, this statement is true.
What is difference between scientific theory and scientific law ?A scientific law foretells the outcomes of particular beginning circumstances. It may tell you what color hair your unborn kid would have or how far a baseball will go when fired at a specific angle.In contrast, a theory seeks to offer the best plausible justification for why events take place the way they do.
A scientific law often describes an observable phenomena. It doesn't explain the phenomenon's existence or its origins. A scientific theory is the explanation for a phenomena. It is untrue that with enough study, hypotheses become laws.
Thus, a scientific law is different from a scientific theory because it describes something in nature without attempting to explain it, this statement is true.
To learn more about difference between scientific theory and scientific law follow the link;
https://brainly.com/question/1308851
#SPJ1
A lever has a 36 cm input arm and a 6 cm output arm. Find MA.
The mechanical advantage of the lever that has a 36 cm input arm and a 6 cm output arm is 0.167.
What is mechanical advantage?Mechanical advantage is the ratio of the output force produced by a machine (especially a simple machine) to the applied input force.
This means that mechanical advantage of a machine can be calculated by dividing the output force by the input force as follows:
MA = Fb/Fa
Where;
MA is the mechanical advantageFb = force of the objectFa = effort to overcome the force of the objectAccording to this question, a lever has a 36 cm input arm and a 6 cm output arm. The mechanical advantage can be calculated as follows;
MA = 6cm ÷ 36cm
MA = 0.167
Therefore, 0.167 is the mechanical advantage of the lever.
Learn more about mechanical advantage at: https://brainly.com/question/16617083
#SPJ1
using the ideal gas law, determine how many moles of an ideal gas are required to fill a 1.09 l can at , and 1.00 atm pressure.
Using the ideal gas law, the moles of an ideal gas required are
Volume = 1.09 L
Pressure = 1.00 atm
Temperature (not given so we take the room temperature) = 25 °C or 298 K
Value of R = 0.0821 atm.L/mol.K
Number of moles = ?
Ideal gas law:
PV = nRT
Rearrange it for the number of moles (n)
n = PV / RT
Put the values
number of moles (n) = 1.00 atm × 1.09 L ÷ 0.0821 atm.L/mol.K × 298 K
number of moles (n) = 1.09 / 24.46 mol
number of moles (n) = 0.0446 mol
So 0.0446 mol of an ideal gas is required to fill 1.09 L can.
You can also learn about Ideal gas law from the following question:
https://brainly.com/question/28257995
#SPJ4
which one of the following will form a basic solution in water? which one of the following will form a basic solution in water? kclo2 nac2h3o2 libro licn all of the above will form basic solutions.
KClO₂, NaC₂H₃O₂, LiBrO, and LiCN will form basic solutions.
How is a basic solution formed?
A basic solution can be created easily. A solid base is dissolved in water to create a basic solution. Water reacts with some solid bases as a result, producing hydroxide ions. For instance, when water (H2O) is exposed to NaOH, the reaction results in Na+ and OH-.
LiBrO in an aqueous solution is basic. This conjugate base creates hydroxide ions when it is in equilibrium with the water.
Salt that is basic is NaC₂H₃O₂. Salts produced by the interaction of a strong base and a weak acid are typically basic. The solution will be basic.
The potassium ion in KClO₂ does not hydrolyze in water. Due to the ionization of ClO−2 C l O 2 − hydroxide ions are formed. This results in a solution with a basic pH value. Similarly, LiCN is also basic in water.
Hence, the answer is all of the above.
To learn more about bases solution, follow the link:
https://brainly.com/question/20016996
#SPJ4
in a lead chloride (pbcl2) saturated solution at an elevated temperature, the chloride ion concentration, [cl-], is 4.20 * 10^-2 m. what is the value of ksp for pbcl2 at this temperature?
To learn about the saturated solution and concentration to find the value of Ksp.
What is saturated solution?
When a solution has dissolved all of the solute it is capable of removing, it is said to be saturated. At a certain temperature, a saturated solution cannot dissolve any more solute. We can create a saturated solution by continuing to dissolve the solute until no more can be done.
What is concentration?
In chemistry and related fields, the idea of concentration is used frequently. It is a way to gauge how much of one substance is incorporated into another.
The ionic compound lead(II) chloride, or PbCl2, does not completely dissociate into lead(II) cations and chloride anions when placed in aqueous solution.
Instead of completely dissociating, a state of equilibrium will be established between the solid lead (II) chloride and the dissolved ions under the control of the solubility product constant, K sp.
PbCl 2(s) + 2 Cl (aq] Pb 2 + (aq]
The compound's molar solubility, or s in moles, represents the amount of lead(II) chloride that will dissolve in aqueous solution at a given temperature.
A mole of lead II chloride will result in the production of 1 mole of lead II cations and 2 moles of chloride anions. To determine the molar solubility of the solid, use an ICE table.
PbCl 2(s) + 2 Cl (aq] Pb 2 + (aq]
I 0 0
C (+s) (+2s)
E s 2s
According to the definition, the solubility product constant will equal
Ksp = (pb²⁺) (cl⁻)²
Ksp = s⋅ (2s)²= 4s³
As a result, lead (II) chloride will have a molar solubility of
4s³=1.6⋅10⁻⁵⇒ s= [tex]\sqrt[3]{1.6/4*10^-5}[/tex] = 0.0159 M.
Therefore, the value of ksp for pbcl2 at this temperature is 0.0159 M.
Learn more about saturated solution from the given link.
https://brainly.com/question/1851822
#SPJ4
A zinc production company uses the following chemical reaction:
Aqueous Solution
Ca
Calcium
15 g
ZnCO₂
Zinc carbonate
25 g
Aqueous Solution
CaCO₂
Calcium carbonate
35 g
What mass of zinc can the company expect to produce?
+
Zn
Zinc
29
The mass of zinc that the company can expect to produce is 5g.
The reaction is given as follows:
Ca + ZnCO₂ → Zn + CaCO₃
15g 25g ? g 35g
To find: mass of zn
The above given reaction is an example of a displacement reaction.
According to law of conservation of mass, in a chemical reaction the mass of reactants is equal to the mass of products.
Here, mass of reactants
= mass of Ca + mass of ZnCO₂
= 15g + 25g
mass of products
= mass of Zn + mass of CaCO₃
=mass of Zn + 35g
∵ mass of reactants = mass of products
⇒ 15g + 25g= mass of Zn + 35g
⇒mass of Zn = (15+25)g - 35g
⇒mass of Zn = 40g- 35g
⇒mass of Zn = 5g
Hence, 5g of Zinc is expected to be produced.
To know more about zinc here
https://brainly.com/question/4233571
#SPJ1
the solid oxide of generic metal m is added to 73 ml of water and reacts to produce a metal hydroxide solution that is 0.35 m in the resulting compound. the metal hydroxide solution then reacts with all of the 29 ml of 1.8 m hcl to form water and the metal salt. how many valence electrons must m have?
2 valence electrons must m have .
What is neutralisation reaction ?
Neutralization is the process by which acids and bases salts and water. When reacting with water, neutralization leaves excess hydrogen or hydroxide ions in solution. The pH of a neutralized solution depends on the strength of the acid or base it contains. Mixing a strong acid and a strong base makes a neutral salt. Mixing a strong acid and a weak base produces an acid. Similarly, when a weak acid is mixed with a strong acid, the salts formed are basic. Neutralization is used in many applications.
For example, acid + base —-> salt + water i. e. NaOH (sodium hydroxide, base) + HCl (hydrochloric acid, acid) ——> NaCl (salt) + H2O (water)react to form
Reaction between metal oxide and H2O
Metal oxide + H2O --> M(OH)x
Reaction between metal oxide and HCl
M(OH)x + xH2O ---> MClx + xH2O
Volume = 29 mL
Molarity of HCl solution = 1.8 M
Moles of HCl = molarity * Volume
Moles of HCl = 1.8 M * 29 mL *10^-3 L/ 1 mL
Moles of HCl = 0.0522 mol
Volume = 73 mL
Molarity of M(OH)x = 0.35 M
Moles of M(OH)x = Volume * Concentration of M(OH)x
Moles of M(OH)x = 73 mL * 10^-3 L / 1mL *0.35 M
Moles of M(OH)2 = 0.02555 mol
x = moles of HCl / moles of M(OH)x
x = 0.0522 mol / 0.02555 mol
x = 2
Number of valance electron = x = 1
To Learn more on Neutralisation reaction, click the link here;
https://brainly.com/question/23008798
#SPJ4
What are the first 20 elements A?
Answer:
The first 20 Elements of the Periodic Table: Hydrogen, Helium, Lithium, Beryllium, Boron, Carbon, Nitrogen, Oxygen, Fluorine, Neon, Sodium, Magnesium, Aluminium, Silicon, Phosphorus, Sulphur, Chlorine, Argon, Potassium, Calcium.
Explanation:
hope this helps:)
The first 20 Elements of the Periodic Table are given below:
What is an element?
A chemical element is a type of atom with a particular number of protons in the nucleus, such as the specific compound made up entirely of that species. Chemical elements, unlike chemical compounds, cannot be broken down into simpler substances by any chemical reaction. The number of protons in the nucleus is an element's defining attribute, and it is symbolised by the symbol Z - all atoms with the same atomic number are atoms of the same element. Atoms are rearranged into new compounds linked together by chemical bonds when various elements undergo chemical reactions.
The first 20 Elements of the Periodic Table are given below:
Hydrogen (atomic number 1), Helium (atomic number 2), Lithium (atomic number 3), Beryllium (atomic number 4), Boron (atomic number 5), Carbon (atomic number 6), Nitrogen (atomic number 7), Oxygen (atomic number 8), Fluorine (atomic number 9), Neon (atomic number 10), Sodium (atomic number 11), Magnesium (atomic number 12), Aluminium (atomic number 13), Silicon (atomic number 14), Phosphorus (atomic number 15), Sulphur (atomic number 16), Chlorine (atomic number 17), Argon (atomic number 18), Potassium (atomic number 19), Calcium (atomic number 20).
To know more about elements, click on the link
https://brainly.com/question/14742603
#SPJ4