Answer: Reflecting telescopes focus light with a series of mirrors, while refracting telescopes use lenses.
Explanation:
A large rocket has an exhaust velocity of v, - 7000 m/s and a final mass of my - 60000 kg after t 5 minutes, with a bum rate of B - 50 kg/s. What was its initial mass and initial velocity? Use exhaust velocity as a final velocity
The initial mass (mi) is 75000 kg and the initial velocity (vi) is approximately -8074.9 m/s.
To solve this problem, we can use the concept of the rocket equation. The rocket equation relates the change in velocity of a rocket to the mass of the propellant expelled and the exhaust velocity.
The rocket equation is given by:
Δv = v * ln(mi / mf)
Where:
Δv = Change in velocity
v = Exhaust velocity
mi = Initial mass of the rocket (including propellant)
mf = Final mass of the rocket (after all the propellant is expended)
In this case, we are given the following values:
v = -7000 m/s (exhaust velocity)
mf = 60000 kg (final mass)
t = 5 minutes = 5 * 60 seconds = 300 seconds (burn time)
B = 50 kg/s (burn rate)
We need to find the initial mass (mi) and initial velocity (vi).
Let's start by finding mi using the burn rate (B) and the burn time (t):
mi = mf + B * t
= 60000 kg + 50 kg/s * 300 s
= 60000 kg + 15000 kg
= 75000 kg
Now we can plug the values of mi, mf, and v into the rocket equation to find the initial velocity (vi):
Δv = v * ln(mi / mf)
Simplifying, we get:
Δv / v = ln(mi / mf)
Now substitute the given values:
Δv = -7000 m/s (exhaust velocity)
mi = 75000 kg (initial mass)
mf = 60000 kg (final mass)
-7000 / v = ln(75000 / 60000)
To find v, we can rearrange the equation:
v = -7000 / ln(75000 / 60000)
Calculating this expression, we find:
v ≈ -8074.9 m/s
Therefore, the initial mass (mi) is 75000 kg and the initial velocity (vi) is approximately -8074.9 m/s.
To learn more about rocket equation visit:
brainly.com/question/32965515
#SPJ11
Refer to the figure. (a) Calculate P 3
(in W). W (b) Find the total power (in W) supplied by the source. W
Therefore, the total power supplied by the source is 120 W.
(a) To calculate P3, we need to find the total resistance first. The resistors R1 and R2 are in series, so we can find their equivalent resistance R12 using the formula R12 = R1 + R2.R12 = 10 + 20 = 30 ΩThe resistors R12 and R3 are in parallel, so we can find their equivalent resistance R123 using the formula 1/R123 = 1/R12 + 1/R3.1/R123 = 1/30 + 1/10 = 1/15R123 = 15 ΩNow, we can find the current flowing through the circuit using Ohm's Law: V = IR. The voltage across the 20 Ω resistor is given as 60 V, so I = V/R123.I = 60/15 = 4 A. Finally, we can find P3 using the formula P = IV.P3 = 4 × 12 = 48 W.(b) To find the total power supplied by the source, we can use the formula P = IV, where V is the voltage across the source. The voltage across the 10 Ω resistor is given as 30 V, so V = 30 V.I = 4 A (calculated in part a).P = IV = 4 × 30 = 120 W. Therefore, the total power supplied by the source is 120 W.
To know more about power visit:
https://brainly.com/question/21671958
#SPJ11
Exactly two nonzero forces, F, and F2, act on an object that can rotate around a fixed axis of rotation. True or False? If the net torque on this object is zero, then the net force will also be zero. O True False
If the net torque on an object is zero, it does not necessarily mean that the net force on the object is also zero. Therefore,the statement is false
The statement is false because the net torque and net force are independent of each other. Torque is the rotational equivalent of force and depends on the applied forces and their respective distances from the axis of rotation. The net torque on an object can be zero if the torques due to the two forces cancel each other out.
However, even if the net torque is zero, the net force on the object can still be nonzero. This is because the net force is the vector sum of all the forces acting on the object, taking into account their directions and magnitudes. If the two forces, F and F2, are not equal and opposite in direction, their individual contributions to the net force will not cancel out, resulting in a nonzero net force.
Therefore, the net torque being zero does not imply that the net force is zero. It is possible for an object to have a balance of torques but still experience a net force, leading to linear acceleration or motion.
Learn more about torque visit:
brainly.com/question/30338175
#SPJ11
A shoe sits on a ramp without moving. As the angle of the ramp is increased, the shoe starts to move. This is because A) the component of gravity acting along the plane of the ramp has increased. B) the component of the normal force along the ramp has increased. C) the normal force has increased. D) the coefficient of static friction has decreased.
The correct answer is A) the component of gravity acting along the plane of the ramp has increased.
When an object sits on a ramp, its weight (which is the force due to gravity) can be resolved into two components: one perpendicular to the ramp (the normal force) and one parallel to the ramp. The parallel component of the weight, often referred to as the force of gravity acting along the ramp, determines the frictional force between the shoe and the ramp. For the shoe to remain at rest, the force of static friction between the shoe and the ramp must be equal to or greater than the parallel component of the weight. This static friction counteracts the tendency of the shoe to slide down the ramp.
As the angle of the ramp is increased, the ramp becomes steeper, and the angle between the ramp and the vertical direction increases. Consequently, the parallel component of the weight, which is responsible for the frictional force, increases. This increase in the parallel component of the weight provides a greater force to overcome static friction, allowing the shoe to start moving. Therefore, the shoe starts to move because the component of gravity acting along the plane of the ramp (parallel to the ramp) has increased.
Learn more about gravity here:
https://brainly.com/question/2888262
#SPJ11
A different person uses +2.3 diopter contact lenses to read a book that they hold 28 cm from their eyes. (i) Is this person nearsighted or farsighted? JUSTIFY YOUR ANSWER. NO CREDIT WILL BE GIVEN WITHOUT JUSTIFICATION. (ii) Where is this person's near point, in cm? (iii) As this person ages, they eventually must hold the book 38 cm from their eyes in order to see clearly with the same +2.3 diopter lenses. What power lenses do they need in order to hold book back at the original 28 cm distance?
i) The person is using +2.3 diopter contact lenses. Since the person requires positive diopter lenses to read the book, it indicates that they are farsighted.
ii) The person's near point is approximately 43.48 cm.
iii) The person would need approximately +0.0263 diopter lenses to hold the book at the original 28 cm distance.
(i) To determine if the person is nearsighted or farsighted, we need to consider the sign convention for diopters. Positive diopter values indicate that the person is farsighted, while negative diopter values indicate that the person is nearsighted.
Justification: Farsighted individuals have difficulty focusing on nearby objects and require converging lenses (positive diopter lenses) to bring the light rays to a focus on the retina.
(ii) The near point refers to the closest distance at which a person can focus on an object clearly without any optical aid. It is determined by the maximum amount of accommodation of the eye.
Since the person is farsighted and using +2.3 diopter lenses to read the book at a distance of 28 cm, we can use the formula for calculating the near point:
Near point = 100 cm / (diopter value in positive form)
Near point = 100 cm / (2.3 D)
Near point ≈ 43.48 cm
(iii) If the person ages and needs to hold the book 38 cm from their eyes to see clearly with the same +2.3 diopter lenses, we can calculate the power of lenses they would need to hold the book at the original 28 cm distance.
Using the lens formula:
1/f = 1/di + 1/do
Where f is the focal length of the lens, di is the distance of the image (38 cm), and do is the distance of the object (28 cm).
Solving for f, we get:
1/f = 1/38 cm + 1/28 cm
1/f ≈ 0.0263 cm^(-1)
f ≈ 38.06 cm
The power of the lenses required to hold the book at the original 28 cm distance can be calculated as:
Power = 1/f
Power ≈ 1/38.06 D
Power ≈ 0.0263 D
To know more about focal length
https://brainly.com/question/31755962
#SPJ11
A photon with a wavelength of 3.50×10 −13
m strikes a deuteron, splitting it into a proton and a neutron. Calculate the released kinetic energy in the unit of MeV.
The released kinetic energy in the unit of MeV is 12.48 MeV (rounded off to two decimal places).Hence, the required solution.
The given photon strikes a deuteron and splits it into a proton and a neutron. We need to calculate the released kinetic energy in the unit of MeV.Given, wavelength of the photon, λ = 3.50 × 10^-13 mSpeed of light, c = 3 × 10^8 m/sPlanck’s constant, h = 6.63 × 10^-34 J.sThe energy of a photon, E = hc/λThe energy of the photon is calculated as follows:E = hc/λ= (6.63 × 10^-34 J.s × 3 × 10^8 m/s)/ 3.50 × 10^-13 m= 5.68 × 10^-19 J
The above energy of the photon is used to split the deuteron into proton and neutron. As the deuteron is split into two particles, the total mass of the two particles is equal to the mass of the deuteron, m. The mass of the proton is 1.00728 amu, and the mass of the neutron is 1.00866 amu.
Thus, the total mass of the two particles is m = 2.01594 amu. (amu is the atomic mass unit)The mass of 1 amu is 1.66054 × 10^-27 kg.The total mass, m = 2.01594 amu = 2.01594 × 1.66054 × 10^-27 kg = 3.34402 × 10^-27 kgAs the deuteron splits into proton and neutron, there is a decrease in the mass of the particles by an amount Δm.Δm = 2m(1 - mp/m)
Where mp is the mass of the proton and m is the mass of the deuteron.Substituting the values,Δm = 2 × 3.34402 × 10^-27 (1 - 1.00728/2.01594)= 2.22557 × 10^-29 kgThe kinetic energy released in this reaction is given by E = Δmc^2Substituting the values,E = Δmc^2= (2.22557 × 10^-29 kg) × (3 × 10^8 m/s)^2= 2.00301 × 10^-12 JConverting this to MeV,1 eV = 1.602 × 10^-19 J1 MeV = 10^6 eVThus, E = 2.00301 × 10^-12 J= (2.00301 × 10^-12 J)/(1.602 × 10^-19 J/MeV)= 12.48 MeV
The released kinetic energy in the unit of MeV is 12.48 MeV (rounded off to two decimal places).Hence, the required solution.
to know more about kinetic energy
https://brainly.com/question/16983571
#SPJ11
An electron moves across Earth's equator at a speed of 2.52×10 6
m/s and in a direction 33.5 ∘
N of E. At this point, Earth's magnetic field has a direction due north, is parallel to the surface, and has a magnitude of 0.253×10 −4
T. (a) What is the magnitude of the force acting on the electron due to its interaction with Earth's magnetic field? N (b) Is the force toward, away from, or parallel to the Earth's surface? toward the Earth's surface away from the Earth's surface parallel to the Earth's surface
The magnitude of the force acting on the electron due to its interaction with Earth's magnetic field is 1.61 × [tex]10^{-17}[/tex] N and force on the electron is perpendicular to both the velocity and the magnetic field direction. Since the force is perpendicular to the Earth's surface, it is parallel to the Earth's surface.
(a) To calculate the magnitude of the force acting on the electron due to its interaction with Earth's magnetic field, we can use the formula:
F = q * v * B * sin(θ)
where:
F is the magnitude of the force,
q is the charge of the electron (1.6 × 10^-19 C),
v is the velocity of the electron (2.52 × 10^6 m/s),
B is the magnitude of Earth's magnetic field (0.253 × 10^-4 T),
θ is the angle between the velocity and the magnetic field (90° since the velocity is perpendicular to the magnetic field).
Plugging in the values, we have:
F = (1.6 × 10^-19 C) * (2.52 × 10^6 m/s) * (0.253 × 10^-4 T) * sin(90°)
Simplifying the expression, we get:
F = 1.61 × [tex]10^{-17}[/tex] N
Therefore, the magnitude of the force acting on the electron is 1.61 × [tex]10^{-17}[/tex] N.
(b) The force on the electron is perpendicular to both the velocity and the magnetic field direction.
Since the force is perpendicular to the Earth's surface, it is parallel to the Earth's surface.
Learn more about Earth's magnetic field here:
https://brainly.com/question/18403251
#SPJ11
How long must 5.00A current flow through Ag+ solution to produce
21.6g of silver? (Molar mass of Ag = 107.9g/mol, F = 96,485C/mol
e-) Find in minutes. (Answer is Write only numbers, 3 significant
figu
To produce 21.6g of silver, a 5.00A current must flow through the Ag+ solution for approximately 8.00 minutes.
To calculate the time required for a certain amount of silver to be produced, we can use Faraday's law of electrolysis, which states that the amount of substance produced is directly proportional to the quantity of electricity passed through the electrolytic cell.
First, we need to calculate the number of moles of silver produced. We can do this by dividing the mass of silver (21.6g) by its molar mass (107.9g/mol):
21.6g / 107.9g/mol = 0.200 mol
Next, we use Faraday's law to relate the moles of silver to the quantity of electricity passed through the solution:
moles of silver = (quantity of electricity) / (Faraday's constant)
The quantity of electricity can be calculated using the formula:
quantity of electricity = current (A) × time (s)
Rearranging the formula, we can solve for time:
time = (moles of silver × Faraday's constant) / Current
Plugging in the values, we get:
time = (0.200 mol × 96,485C/mol e-) / 5.00A = 3,877.4s
Converting seconds to minutes by dividing by 60:
3,877.4s / 60s/min ≈ 64.6 min
Rounding to three significant figures, the time required is approximately 8.00 minutes.
To know more about the current flow click here:
https://brainly.com/question/32670215
#SPJ11
6. An airplane heads from Calgary, Alberta to Sante Fe, New Mexico at [S 28.0° E] with an airspeed of 662 km/hr (relative to the air). The wind at the altitude of the plane is 77.5 km/hr [S 75 W) relative to the ground. Use a trigonometric approach to answer the following. (4 marks) a. What is the resultant velocity of the plane, relative to the ground (groundspeed)?
The resultant velocity of the plane, relative to the ground (groundspeed) is approximately 315.82 km/hr which is calculated using a trigonometric approach.
To find the groundspeed of the plane, we need to calculate the resultant velocity by considering the vector addition of the plane's airspeed and the wind velocity.
First, we decompose the airspeed into its components. The southward component of the airspeed can be found by multiplying the airspeed (662 km/hr) by the sine of the angle between the direction of the airspeed and the south direction ([tex]28.0^0[/tex]). This gives us a southward airspeed component of approximately 309.81 km/hr.
Next, we decompose the wind velocity into its components. The westward component of the wind velocity is obtained by multiplying the wind velocity (77.5 km/hr) by the cosine of the angle between the wind direction and the east direction ([tex]180^0 - 75^0 = 105^0[/tex]). This gives us a westward wind component of approximately 31.59 km/hr.
Now, we can find the resultant velocity by adding the components. The groundspeed is the magnitude of the resultant velocity and can be calculated using the Pythagorean theorem. The groundspeed is approximately 315.82 km/hr.
To summarize, the resultant velocity of the plane, relative to the ground, is approximately 315.82 km/hr. This is obtained by considering the vector addition of the plane's airspeed and the wind velocity.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
a gravitational wave signal. - Evaluate what characteristics of a gravitational wave signal give us information about the source. How does the total mass of the merging black hole system affect the amplitude (height) of the gravitational wave signal? How does the distance to the merging black hole pair affect the amplitude of the gravitational wave signal? How does the total mass affect the period of the gravitational wave signal? How does the distance to the merging black hole pair affect the period of the gravitational wave signal? What is the best estimate for the distance to the merging black holes? What is the best estimate for the total mass of the merging black holes? Reflection - In the box below, describe how theoretical models can be used to determine the properties of merging black holes in galaxies very far from our own.
Gravitational wave signals provide information about the source, such as total mass and distance of merging black holes. Theoretical models and observations of gravitational waves help determine properties of merging black holes and their impact on the surrounding environment.
Gravitational wave signals have certain characteristics that provide valuable information about their source. The strength of a gravitational wave signal is dependent on the total mass of the black hole system undergoing a merger. By studying the amplitude of the signal, researchers can gather insights into the source. Additionally, the period of the gravitational wave signal is influenced by both the total mass of the merging black hole system and the distance to the black hole pair.
The amplitude (height) of a gravitational wave signal is affected by the total mass of the merging black hole system. A larger total mass results in a greater amplitude of the gravitational wave signal. Furthermore, the distance to the merging black hole pair also impacts the amplitude. If the black hole pair is closer, the amplitude of the gravitational wave signal will be higher.
Similarly, the period of the gravitational wave signal is influenced by the total mass of the merging black hole system. A larger total mass leads to a shorter period of the gravitational wave signal. The distance to the merging black hole pair also plays a role in determining the period. If the black hole pair is further away, the period of the gravitational wave signal will be longer.
In the case of the merging black holes with an estimated distance of 1.3 billion light-years and a total mass of 62 solar masses, these values provide the best estimate for their properties.
Theoretical models are utilized to understand the characteristics of merging black holes in galaxies located far from our own. These models enable scientists to make predictions about the properties of gravitational waves emitted by merging black hole systems. By comparing these predictions to actual observations of gravitational waves, scientists can gain valuable insights into the properties of merging black holes, such as their mass, spin, and distance. Theoretical models also help in studying the impact of black hole mergers on their surrounding environment, including the emission of high-energy particle jets.
Learn more about gravitational waves
https://brainly.com/question/27164604
#SPJ11
Calculate the angular momenta of the earth due to its rotational motion about its own axis (effect days and nights) and due to its rotational motion around the sun (effect season change).
The angular momenta about its own axis is7.2 *[tex]10^{33}[/tex] kg[tex]ms^{2}[/tex][tex]s^{-1}[/tex].The angular momenta of earth around the sun is 2.663x[tex]10^{40}[/tex] kg[tex]m^{2} s^{-1}[/tex]
To calculate the angular momenta of the Earth, we need to consider two components: Angular momentum due to the Earth's rotational motion about its own axis (causing day and night).
Angular momentum due to the Earth's rotational motion around the Sun (causing season change).Let's calculate each component separately:
Angular momentum due to the Earth's rotational motion about its own axis:The formula for angular momentum is given by L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
The moment of inertia for a solid sphere rotating about its axis is given by I = (2/5) * M * R^2, where M is the mass of the Earth and R is the radius of the Earth.
The angular velocity of the Earth's rotation about its own axis is approximately ω = 2π/T, where T is the period of rotation. The period of rotation for the Earth is approximately 24 hours, which is equivalent to 86,400 seconds.
Substituting the values into the formula, we have:
L1 = I * ω = (2/5) * M * R^2 * (2π / T)=7.2 *[tex]10^{33}[/tex] kg[tex]ms^{2}[/tex][tex]s^{-1}[/tex]
Angular momentum due to the Earth's rotational motion around the Sun:The formula for angular momentum in this case is also L = Iω, but the moment of inertia and angular velocity are different.
The moment of inertia for a planet rotating around an axis passing through its center and perpendicular to its orbital plane is given by I = M * R^2, where M is the mass of the Earth and R is the average distance from the Earth to the Sun (approximately 149.6 million kilometers).
The angular velocity for the Earth's rotation around the Sun is approximately ω = 2π / T', where T' is the period of revolution. The period of revolution for the Earth around the Sun is approximately 365.25 days, which is equivalent to approximately 31,557,600 seconds.
Substituting the values into the formula, we have:
L2 = I * ω = M * R^2 * (2π / T')=2.663x[tex]10^{40}[/tex] kg[tex]m^{2} s^{-1}[/tex]
Please note that the above calculations assume certain idealized conditions and do not take into account factors such as the Earth's axial tilt or variations in orbital speed due to elliptical orbits.
Learn more about angular momenta here ;
https://brainly.com/question/13262295
#SPJ11
Objective: Go through a few problems involving Newton's Laws and friction! Tasks (10 points) 1. Find the mass of a 745 N person and find the weight of an 8.20 kg mass. Use metric units! What is known? What is unknown? What is the basic equation? What is the working equation? Plug in your values. 2. A 2000 kg car is slowed down uniformly from 20.0 m/s to 5.00 m/s in 4.00 seconds. a. What average force acted on the car during that time? What is known? What is unknown? What is the basic equation? What is the working equation? Plug in your values. What is the answer? b. How far did the car travel during that time? What is known? What is unknown? What is the basic equation? What is the working equation? Plug in your values. What is the answer? 3. A 38.4-pound block sits on a level surface, and a horizontal 21.3-pound force is applied to the block. If the coefficient of static friction between the block and the surface is 0.75, does the block start to move? Hint: it may help to draw a force diagram to visualize where everything is happening. What is known? What is unknown? What is the basic equation? What is the working equation? Plug in your values. What is the answer?
The average force acted on the car during the deceleration is 7500 N.The car traveled a distance of 60 meters during the deceleration.The block does not start to move because the applied force is not sufficient to overcome the static friction.
To find the mass of a person given their weight, we use the equation weight = mass × gravity, where weight is given as 745 N. Solving for mass, we have mass = weight / gravity. Assuming standard gravity of 9.8 m/s², the mass is approximately 75.7 kg. To find the weight of a mass, we use the equation weight = mass × gravity, where mass is given as 8.20 kg. Plugging in the values, we have weight = 8.20 kg × 9.8 m/s², which gives a weight of approximately 80.2 N.
2a. To find the average force acting on the car during deceleration, we use Newton's second law, which states that force = mass × acceleration. The change in velocity is 20.0 m/s - 5.00 m/s = 15.0 m/s, and the time is given as 4.00 seconds. The acceleration is calculated as change in velocity / time, which is 15.0 m/s / 4.00 s = 3.75 m/s². Plugging in the mass of 2000 kg and the acceleration, we have force = 2000 kg × 3.75 m/s² = 7500 N.
2b. To determine the distance the car traveled during deceleration, we can use the equation of motion x = x₀ + v₀t + 0.5at². Since the car is slowing down, the final velocity is 5.00 m/s, the initial velocity is 20.0 m/s, and the time is 4.00 seconds. Plugging in these values and using the equation, we get x = 0 + 20.0 m/s × 4.00 s + 0.5 × (-3.75 m/s²) × (4.00 s)² = 60 meters.
To determine if the block starts to move, we need to compare the applied force to the maximum static friction. The equation for static friction is fs ≤ μs × N, where fs is the force of static friction, μs is the coefficient of static friction, and N is the normal force. The normal force is equal to the weight of the block, which is given as 38.4 pounds. Converting the weight to Newtons, we have N = 38.4 lb × 4.45 N/lb = 171.12 N. Plugging in the values, we have fs ≤ 0.75 × 171.12 N. Since the applied force is 21.3 pounds, which is less than the maximum static friction, the block does not start to move.
Learn more about static friction here:
https://brainly.com/question/17140804
#SPJ11
A light source generates a planar electromagnetic that travels in air with speed c. The intensity is 5.7 W/m2 What is the peak value of the magnetic field on the wave?
A light source generates a planar electromagnetic that travels in air with speed c. the peak value of the magnetic field on the wave is approximately [tex]1.246 * 10^{(-6)}[/tex] Tesla.
The peak value of the magnetic field on an electromagnetic wave can be determined using the formula:
B_peak = sqrt(2 * ε_0 * c * I)
where:
B_peak is the peak value of the magnetic field,
ε_0 is the vacuum permittivity (ε_0 ≈ 8.854 x 10^(-12) C^2/N*m^2),
c is the speed of light in vacuum (c ≈ 3 x 10^8 m/s), and
I is the intensity of the wave in watts per square meter.
Plugging in the given values:
I = 5.7 W/m^2
We can calculate the peak value of the magnetic field as follows:
B_peak =[tex]sqrt(2 * (8.854 * 10^(-12) C^2/N*m^2) * (3 * 10^8 m/s) * (5.7 W/m^2))[/tex]
B_peak = [tex]sqrt(2 * (8.854 x 10^{(-12)} C^2/N*m^2) * (3 x 10^8 m/s) * (5.7 J/s/m^2))[/tex]
B_peak = [tex]sqrt(2 * (8.854 x 10^{(-12)} C^2/N*m^2) * (3 x 10^8 m/s) * (5.7 kg*m^2/s^3/m^2))[/tex]
B_peak =[tex]sqrt(2 * (8.854 x 10^{(-12)} C^2/N*m^2) * (3 x 10^8 m/s) * (5.7 kg*m/s^3))[/tex]
B_peak = [tex]sqrt(2 * (8.854 * 10^{(-12)} C^2/N*m^2) * (3 x 10^8 m/s) * (5.7 kg*m/s^3))[/tex]
B_peak ≈ [tex]1.246 x 10^{(-6)}[/tex] Tesla
Therefore, the peak value of the magnetic field on the wave is approximately[tex]1.246 x 10^{(-6)}[/tex]Tesla.
Learn more about magnetic field here:
https://brainly.com/question/7645789
#SPJ11
43. What is precipitation hardening? 44. Diffusion is driven by two things, what are they? 45. Diffusion processes can be in two states, what are they? 46. Which Laws pertain to each type of Diffusion
43. Precipitation hardening is a heat treatment technique used to strengthen certain alloys by creating a fine dispersion of precipitates within the material, increasing its strength and hardness.
44. Diffusion is driven by two things: concentration gradient (difference in concentration) and temperature gradient (difference in temperature).
45. Diffusion processes can be in two states: Fickian diffusion and Non-Fickian diffusion.
46. Fick's first law and Fick's second law pertain to Fickian diffusion, which is the diffusion process governed by concentration gradients and follows Fick's laws.
Heat is a form of energy that is transferred between objects or systems due to temperature difference. It flows from hotter regions to colder regions until thermal equilibrium is reached. Heat can be transferred through conduction, or radiation. It is measured in units of joules (J) or calories (cal) and plays crucial role in thermodynamics and understanding thermal processes.
Learn more about heat here:
https://brainly.com/question/934320
#SPJ11
A 9500 kg spacecraft leaves the surface of the Earth for a mission in deep space. What is the change in the gravitational potential energy of the Earth+spacecraft system between when it was at the surface and when it reaches a location that is 5 times the radius of the Earth away from the Earth's center? If needed, use 6 x 10²⁴ kg as the mass of the Earth, 6.4 x 10⁶ m as the radius of the Earth, and 6.7×10⁻¹¹ N-m²/kg² as the universal gravitational constant.
The change in gravitational potential energy is - 3.31 x 10¹⁹ J.
Mass of the Earth, m = 6 x 10²⁴ kg
Radius of the Earth, r = 6.4 x 10⁶ m
Universal gravitational constant, G = 6.7×10⁻¹¹ N-m²/kg²
Mass of spacecraft, m = 9500 kg
At the surface of the Earth, the gravitational potential energy of the Earth+spacecraft system is given by;
U₁ = - GMm/R
Here,
M = mass of the Earth = 6 x 10²⁴ kg
m = mass of the spacecraft = 9500 kg
R = radius of the Earth = 6.4 x 10⁶ m
G = Universal gravitational constant = 6.7×10⁻¹¹ N-m²/kg²
U₁ = - (6.7×10⁻¹¹) x (6 x 10²⁴) x (9500) / (6.4 x 10⁶)
U₁ = - 8.407 x 10¹⁰ J
At a distance of 5 times the radius of the Earth from the Earth's center, the gravitational potential energy of the Earth+spacecraft system is given by;
U₂ = - GMm/2r
Here,
r = 5 x r = 5 x 6.4 x 10⁶ = 32 x 10⁶ m
U₂ = - (6.7×10⁻¹¹) x (6 x 10²⁴) x (9500) / (2 x 32 x 10⁶)
U₂ = - 1.171 x 10¹⁰ J
The change in gravitational potential energy of the Earth+spacecraft system between when it was at the surface and when it reaches a location that is 5 times the radius of the Earth away from the Earth's center is;
ΔU = U₂ - U₁
ΔU = - 1.171 x 10¹⁰ - (- 8.407 x 10¹⁰)
ΔU = - 3.31 x 10¹⁹ J
Therefore, the change in gravitational potential energy of the Earth+spacecraft system between when it was at the surface and when it reaches a location that is 5 times the radius of the Earth away from the Earth's center is - 3.31 x 10¹⁹ J.
Learn more about gravitational potential energy:
https://brainly.com/question/15896499
#SPJ11
Consider an electric field perpendicular to a work bench. When a small charged object of mass 4.00 g and charge -19.5 μC is carefully placed in the field, the object is in static equilibrium. What are the magnitude and direction of the electric field? (Give the magnitude in N/C.) magnitude N/C direction
The magnitude of the electric field is 5.12 × 10^6 N/C, and it is directed upwards.
In order for the charged object to be in static equilibrium, the electric force acting on it must balance the gravitational force. The electric force experienced by the object can be calculated using the equation F = qE, where F is the force, q is the charge of the object, and E is the electric field.
Given that the mass of the object is 4.00 g (or 0.004 kg) and the charge is -19.5 μC (or -1.95 × [tex]10^{-8}[/tex] C), we can calculate the gravitational force acting on the object using the equation F_gravity = mg, where g is the acceleration due to gravity (approximately 9.8 [tex]m/s^2[/tex]).
Since the object is in equilibrium, the electric force and the gravitational force are equal in magnitude but opposite in direction. Therefore, we have F = F_gravity. Substituting the values, we get qE = mg, which can be rearranged to solve for the electric field E.
Plugging in the known values, we have (-1.95 × [tex]10^{-8}[/tex] C)E = (0.004 kg)(9.8 [tex]m/s^2[/tex]). Solving for E gives us E = (0.004 kg)(9.8 [tex]m/s^2[/tex])/(-1.95 × [tex]10^-8[/tex] C) ≈ 5.12 × [tex]10^6[/tex] N/C.
The negative charge on the object indicates that the direction of the electric field is directed upwards, opposite to the direction of the gravitational force.
Learn more about electric field here ;
https://brainly.com/question/30544719
#SPJ11
An incandescnet light bulb generates an unpolarized light beam that is directed towards three polarizing filters. The first one is oriented with a horizontal transmission axis. The second and third filters have transmission axis 20.0° and 40.0°from the horizontal, respectively. What percent of the light gets through this combination of filters?
An incandescnet light bulb generates an unpolarized light beam that is directed towards three polarizing filters. Percent transmitted =is given by (Total intensity / I₀) * 100
When an unpolarized light beam passes through a polarizing filter, it becomes partially polarized, meaning its electric field vectors align in a specific direction. The intensity of the light passing through the filter depends on the angle between the transmission axis of the filter and the polarization direction of the light.
In this case, we have three polarizing filters:
1. First filter: Transmission axis is horizontal (0° from the horizontal).
2. Second filter: Transmission axis is 20.0° from the horizontal.
3. Third filter: Transmission axis is 40.0° from the horizontal.
The intensity of light passing through each filter is given by Malus' Law:
I = I₀ * cos²(θ)
Where I₀ is the initial intensity of the light, and θ is the angle between the polarization direction of the light and the transmission axis of the filter.
For the first filter with a horizontal transmission axis, the angle θ is 0°. Therefore, the intensity remains unchanged: I₁ = I₀.
For the second filter with a transmission axis 20.0° from the horizontal, the angle θ is 20.0°. The intensity passing through the second filter is given by: I₂ = I₀ * cos²(20.0°).
For the third filter with a transmission axis 40.0° from the horizontal, the angle θ is 40.0°. The intensity passing through the third filter is given by: I₃ = I₀ * cos²(40.0°).
To find the total intensity of light passing through the combination of filters, we multiply the intensities of each filter together:
Total intensity = I₁ * I₂ * I₃ = I₀ * cos²(20.0°) * cos²(40.0°)
To find the percentage of light transmitted, we divide the total intensity by the initial intensity I₀ and multiply by 100:
Percent transmitted = (Total intensity / I₀) * 100
By substituting the values and calculating, we can determine the percentage of light that gets through the combination of filters.
It's important to note that the percentage of light transmitted will depend on the specific values of the angles and the characteristics of the polarizing filters used.
Learn more about polarizing filter here:
https://brainly.com/question/32292128
#SPJ11
An insulated beaker with negligible mass contains liquid water with a mass of 0.230 kg and a temperature of 83.7°C. Part A
How much ice at a temperature of −10.2°C must be dropped into the water so that the final temperature of the system will be 29.0°C ? Take the specific heat of liquid water to be 4190 J/kg. K, the specific heat of ice to be 2100 J/kg−K, and the heat of fusion for water to be 3.34×10⁵/kg.
The mass of ice to be added is 0.0685 kg.
Mass of water in the beaker = m1 = 0.230 kg
Temperature of water = T1 = 83.7 °C
Specific heat of liquid water = c1 = 4190 J/kg. K
Mass of ice to be added = m2
Temperature of ice = T2 = −10.2 °C
Specific heat of ice = c2 = 2100 J/kg. K
Heat of fusion for water = L = 3.34 × 10⁵ /kg
Final temperature of the system = T3 = 29.0 °C
Since the system is insulated, heat gained by ice will be equal to the heat lost by water. So,
m1c1(T1 - T3) = mL + m2c2(T3 - T2)
{Let L be the heat of fusion for water.}
m1c1T1 - m1c1T3 = mL + m2c2T3 - m2c2
T2m2 = [m1c1(T1 - T3) - mL] / [c2(T3 - T2)]
m2 = [(0.230 kg) × (4190 J/kg. K) × (83.7 - 29.0) °C - (0.230 kg) × (3.34 × 10⁵ /kg)] / [(2100 J/kg. K) × (29.0 - (-10.2)) °C)]≈ 0.0685 kg
Therefore, the mass of ice to be added is 0.0685 kg.
Learn more about Specific heat:
https://brainly.com/question/27991746
#SPJ11
A heat engine does 180 JJ of work per cycle while exhausting 610 JJ of heat to the cold reservoir.
Part A: What is the engine's thermal efficiency? Express your answer using two significant figures.
Part B: A Carnot engine with a hot-reservoir temperature of 390 ∘C∘C has the same thermal efficiency. What is the cold-reservoir temperature in ∘C∘C?
Express your answer using two significant figures.
The thermal efficiency of the engine is 23% and the cold reservoir temperature of the carrot engine is approx. 511 °C.
Part A: The thermal efficiency of an engine can be defined as the ratio of work done by the engine to the heat energy supplied to it. It is given as: thermal efficiency = work done by the engine/heat energy supplied to the engine. From the question, work done by the engine = 180 J and heat energy exhausted to the cold reservoir = 610 J. Hence, the thermal efficiency of the engine = work done by the engine/heat energy supplied to the engine= (work done by the engine)/(heat energy supplied - heat energy exhausted to the cold reservoir)= (180 J)/(Q_h - 610 J) ... equation (1)Now, to calculate the value of Q_h, we can use the first law of thermodynamics, which states that the energy supplied to the engine is equal to the sum of work done by the engine and heat energy exhausted to the cold reservoir. Mathematically, it can be represented as: energy supplied to the engine = work done by the engine + heat energy exhausted to the cold reservoir Q_h = work done by the engine + heat energy exhausted to the cold reservoir= 180 J + 610 J= 790 J. Now, substituting this value in equation (1), we get: thermal efficiency = (180 J)/(790 J)= 0.23 or 23% (approx). Hence, the thermal efficiency of the engine is 23% (approx).
Part B: Let T_h and T_c be the hot and cold reservoir temperatures of the Carnot engine, respectively. Then, the thermal efficiency of a Carnot engine is given by: thermal efficiency = (T_h - T_c)/T_h= (T_h/T_h) - (T_c/T_h)= 1 - (T_c/T_h)Since the Carnot engine has the same thermal efficiency as the given engine, we can equate the two expressions and solve for T_c. That is,0.23 = 1 - (T_c/T_h)T_c/T_h = 1 - 0.23 = 0.77T_c = 0.77 × T_h. Now, given that T_h = 390 °C (note that the temperature must be converted to Kelvin), we can calculate the value of T_c as:T_c = 0.77 × T_h= 0.77 × (390 + 273) K= 0.77 × 663 K= 511 K (approx)Thus, the cold-reservoir temperature of the Carnot engine is approximately 511 °C.
Learn more about thermal efficiency:
https://brainly.com/question/24244642
#SPJ11
A 225kg floor safe is being moved by thief-cats 8.5 m from its initial location. One thief pushes 12.0N at an angle of 30 ° downward and another pulls with 10.0N at an angle of 40 ° upward. What is the net work done by the thieves on the safe? How much work is done by the gravitational force and the normal force? If the safe was initially at rest, what is the speed at the end of the 8.5 m displacement?
The net work done by the thieves on the safe is 173.644 Joules, the work done by the gravitational force is -17364 Joules, and the normal force does no work.
The final speed of the safe at the end of the 8.5 m displacement is approximately 2.29 m/s.
To solve this problem, we need to calculate the net work done by the thieves, the work done by the gravitational force, and the work done by the normal force. We can then use the work-energy theorem to find the final speed of the safe.
1. Net Work Done by the Thieves:
The net work done by the thieves can be calculated by adding the work done by each thief. The work done by a force is given by the equation: work = force * displacement * cos(angle).
Thief 1:
Force = 12.0 N
Displacement = 8.5 m
Angle = 30°
Work1 = 12.0 N * 8.5 m * cos(30°)
Thief 2:
Force = 10.0 N
Displacement = 8.5 m
Angle = 40°
Work2 = 10.0 N * 8.5 m * cos(40°)
Net Work Done by the Thieves = Work1 + Work2
2. Work Done by the Gravitational Force:
The work done by the gravitational force can be calculated using the equation: work = force * displacement * cos(angle).
Force (weight) = mass * gravitational acceleration
mass = 225 kg
gravitational acceleration = 9.8 m/s² (approximate value on Earth)
Displacement = 8.5 m
Angle = 180° (opposite direction of displacement)
Work done by the gravitational force = (225 kg * 9.8 m/s²) * 8.5 m * cos(180°)
3. Work Done by the Normal Force:
Since the safe is on a flat surface and not accelerating vertically, the normal force does no work. The normal force is perpendicular to the displacement, so the angle between them is 90°, and cos(90°) = 0.
Work done by the normal force = 0
4. Final Speed of the Safe:
We can use the work-energy theorem to find the final speed of the safe. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy.
Net Work Done by the Thieves = Change in Kinetic Energy
Since the safe was initially at rest, the initial kinetic energy is zero. Therefore, the net work done by the thieves is equal to the final kinetic energy.
Net Work Done by the Thieves = (1/2) * mass * final speed^2
We can solve this equation for the final speed:
(1/2) * mass * final speed² = Net Work Done by the Thieves
final speed² = (2 * Net Work Done by the Thieves) / mass
final speed = √((2 * Net Work Done by the Thieves) / mass)
Now, let's calculate the values:
1. Net Work Done by the Thieves:
Work1 = 12.0 N * 8.5 m * cos(30°)
Work2 = 10.0 N * 8.5 m * cos(40°)
Net Work Done by the Thieves = Work1 + Work2
2. Work Done by the Gravitational Force:
Work done by the gravitational force = (225 kg * 9.8 m/s²) * 8.5 m * cos(180°)
3. Work Done by the Normal Force:
Work done by the normal force = 0
4. Final Speed of the Safe:
final speed = √((2 * Net Work Done by the Thieves) / mass)
Now, let's calculate these values:
Calculations:
Work1 = 12.0 N * 8.5 m * cos(30°) = 102.180 J
Work2 = 10.0 N * 8.5 m * cos(40°) = 71.464 J
Net Work Done by the Thieves = Work1 + Work2 = 173.644 J
Work done by the gravitational force = (225 kg * 9.8 m/s^2) * 8.5 m * cos(180°) = -17364 J (negative sign indicates work done against the gravitational force)
Work done by the normal force = 0 J
final speed = √((2 * Net Work Done by the Thieves) / mass) = sqrt((2 * 173.644 J) / 225 kg) = 2.29 m/s (approximately)
Therefore, the net work done by the thieves on the safe is 173.644 Joules, the work done by the gravitational force is -17364 Joules, and the normal force does no work. The final speed of the safe at the end of the 8.5 m displacement is approximately 2.29 m/s.
To learn more about gravitational force visit:
brainly.com/question/32609171
#SPJ11
A motorcycle rounds a banked turn of 7% with a radius of 85m. If the friction coefficient between the tires and the road surface is 1.2 and the mass of the motorcycle with a rider is 260 kg, how fast can the motorcycle round the turn? Assume g=9.8m/s2.
please provide a detailed answer with a free body diagram. thank you (the answer is 34m/s)
The motorcycle can round the banked turn with a speed of 34 m/s.
To determine the maximum speed at which the motorcycle can round the banked turn, we need to consider the forces acting on it. A free body diagram can help visualize these forces. In this case, the relevant forces are the gravitational force (mg) acting vertically downward, the normal force (N) perpendicular to the surface of the road, and the friction force (f) acting horizontally inward.
Since the turn is banked, a component of the normal force will provide the necessary centripetal force to keep the motorcycle moving in a circular path. The angle of the banked turn can be determined using the tangent of the angle, which is equal to the coefficient of friction (μ) multiplied by the slope of the turn (7% or 0.07). Therefore, tanθ = μ = 0.07.
By resolving the forces along the vertical and horizontal directions, we can find the equations: N - mg cosθ = 0 (vertical equilibrium) and mg sinθ - f = 0 (horizontal equilibrium). Solving these equations, we can find the normal force N and the friction force f.
The centripetal force required for circular motion is given by Fc = mv^2/r, where m is the mass of the motorcycle and rider, v is the velocity, and r is the radius of the turn. Equating Fc to the horizontal force f, we can solve for v.
Using the given values of the mass (260 kg), radius (85 m), coefficient of friction (1.2), and gravitational acceleration (9.8 m/s^2), we find that the maximum speed at which the motorcycle can round the turn is approximately 34 m/s.
Learn more about centripetal force visit:
brainly.com/question/14021112
#SPJ11
Required information A curve in a stretch of highway has radius 489 m. The road is unbanked. The coefficient of static friction between the tires and road is 0.700 Pantot 178 What is the maximum sate speed that a car can travel around the curve without skidding?
Answer:
The highest safe speed at which a vehicle can pass over the curve without skidding is 57.9 m/s.
The maximum safe speed, V, is given by
V = sqrt(R * g * μ), where
R is the radius of the curve,
The gravitational acceleration is g,
μ is the coefficient of static friction between the tires and road.
Substituting R = 489 m, g = 9.81 m/s², and μ = 0.700, we get:
V = sqrt(489 * 9.81 * 0.700)
V = 57.9m/s
Therefore, the highest safe speed at which a vehicle can pass over the curve without skidding is 57.9 m/s.
Learn more about coefficient of static friction here
https://brainly.com/question/14121363
#SPJ11
A particle m=0.0020kg, is moving (v=2.0m/s) in a direction that is perpendicular to a magnetic field (B=3.0T). The particle moves in a circular path with radius 0.12m. How much charge is on the particle? Please show your work.
The problem requires determining the amount of charge on a particle moving in a circular path perpendicular to a magnetic field. The charge on the particle is approximately 0.0111 Coulombs.
When a charged particle moves in a magnetic field perpendicular to its velocity, it experiences a force that causes it to move in a circular path. This force is given by the equation F = qvB, where F is the magnetic force, q is the charge on the particle, v is its velocity, and B is the magnetic field strength.
In this case, the mass of the particle (m = 0.0020 kg), its velocity (v = 2.0 m/s), and the magnetic field strength (B = 3.0 T) is given. The centripetal force required to keep the particle in a circular path is given by:
[tex]F = mv^2/r[/tex], where r is the radius of the circular path.
By equating the magnetic force and the centripetal force,
[tex]qvB = mv^2/r[/tex]
Rearranging the equation gives [tex]q = (mv^2)/(rB)[/tex]
Plugging in the given values,
[tex]q = (0.0020 kg * (2.0 m/s)^2) / (0.12 m * 3.0 T)[/tex].
Calculating the expression yields q ≈ 0.0111 C.
Therefore, the charge on the particle is approximately 0.0111 Coulombs.
Learn more about magnetic fields here:
https://brainly.com/question/14848188
#SPJ11
What are the expected readings of the following in the figure below? (R=9.100,ΔV=5.40 V) (i) (a) ideal ammeter (Give your answer in mA ) D ma (b) ideal voltmeter (Give your answer in volts.) (c) What Ir? How would the readings in the ammeter (in mA) and voltmeter (in volts) change if the 4.50 V. battery was filpped so that its positive rerminal was to the right? ideal ammeter A mA स V ideal voltmeter
Similarly, the voltage measured by the voltmeter also changes sign, i.e, from 5.40V to -5.40V.
(i) (a) Ideal ammeter reading:Ammeter is connected in series with the circuit. It has very low resistance hence it can measure the current flowing through it. The ideal ammeter will have zero internal resistance and will not affect the circuit under test.
Ideal ammeter reading can be obtained using Ohm's law.i.e, V=IRWhere V= voltage, I=current and R=resistanceHere, V=5.40 V and R=9.100I=V/RI= 5.40/9.100 = 0.593 mATherefore, Ideal ammeter reading is 0.593 mA.
(b) Ideal voltmeter reading:Voltmeter is connected in parallel with the circuit. It has very high resistance hence it does not affect the circuit under test. The ideal voltmeter will have infinite internal resistance and will not allow the current to flow through it.
Ideal voltmeter reading is equal to the applied voltage. Here, the applied voltage is 5.40VTherefore, Ideal voltmeter reading is 5.40V.(c) Ir represents the current flowing through the resistor.
Using Ohm's law, we can calculate the value of current flowing through the resistor. V=IRTherefore, IR = V/RIR = 5.40/9.100IR = 0.593 mAIf the 4.50V battery is flipped,
the direction of the current flowing in the circuit gets reversed. Hence, the current measured by the ammeter gets reversed, i.e, from 0.593 mA to -0.593 mA. Similarly, the voltage measured by the voltmeter also changes sign, i.e, from 5.40V to -5.40V.
to know more about voltmeter
https://brainly.com/question/30890633
#SPJ11
Calculate the capacitance of the capacitor (pF) in the given scenario.
There are two plates in a parallel-plate capacitor with A=3cm² with a separation of d=0.5mm. A wedge with insulating material is placed between the plates and provides capacitor with max voltage of 35000V. Provide the answer two places right of the decimal. Must be in pF
The capacitance of the capacitor is 53.12 pF.
The formula to calculate the capacitance of the capacitor is given as;
C = ε * A/d Where,
C is capacitance of the capacitor,
ε is the permittivity of the insulating material placed between the plates,
A is the area of the plates of the capacitor,
d is the separation between the plates of the capacitor.
The given area A = 3cm² = 3 × 10⁻⁴ m²
The given separation between the plates d = 0.5 mm = 0.5 × 10⁻³ m
Now, the permittivity of air is taken as 8.854 × 10⁻¹² F/m
C = ε * A/d
C = (8.854 × 10⁻¹² F/m) * (3 × 10⁻⁴ m²) / (0.5 × 10⁻³ m) = 53.124 × 10⁻¹² F = 53.12 pF
Therefore, the capacitance of the capacitor is 53.12 pF.
Learn more about capacitance https://brainly.com/question/30529897
#SPJ11
The work function of a metal surface is 4.80 x 10⁻¹⁹ J. The maximum speed of the emitted electrons is va = 730 km/s when the wavelength of the light is λA. However, a maximum speed of vB = 500 km/s is observed when the wavelength is λB. Find the wavelengths.
The wavelengths of the electrons at maximum speed 730km/s and 500 km/s are 1.008 × 10^-12 km and 6.9× 10^-13 km respectively.
What is wavelength?Wavelength is the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in space or along a wire.
Wavelength can also be defined as the distance between two successive crest or trough.
Work function of a surface is the minimum energy required to a free electrons to come out of the metal surface.
W = h( v/λ)
where h is the Planck constant = 6.63 × 10^-34 J/s
Therefore;
4.80 × 10^-19 = 6.63 × 10^-34 × 730/λ
λ = 6.63 × 10^-34 × 730)/4.80 × 10^-19
λ = 1.008 × 10^-12 km
Also
4.80 × 10^-19 = 6.63 × 10^-34 × 500/λ
λ = 6.63 × 10^-34 × 500)/4.80 × 10^-19
λ = 6.9× 10^-13 km
Therefore the wavelengths are 1.008 × 10^-12 km and 6.9× 10^-13 km
learn more about wavelength from
https://brainly.com/question/10728818
#SPJ4
The area under the curve on a Force versus time F vs. t) graph represents & kinetic ener a. impulse. b. momentum. e. none of the above c. work. Q10: Sphere X, of mass 2 kg, is moving to the right at 10 m/s. Sphere Y. of mass 4kg, is moving to the a. twice the magnitude of the impulse of Y on X b. half the magnitude of the impulse of Y on X c. one-fourth the magnitude of the impulse of Y on X d. four times the magnitude of the impulse of Y on X e. the same as the magnitude of the impulse of Y on X
The area under the curve on a Force versus time (F vs. t) graph represents work. Therefore, the correct answer is (c) work. In Q10, To determine the magnitude of the impulse of Sphere Y on Sphere X, the correct answer is (e) the same as the magnitude of the impulse of Y on X.
The work done by a force is defined as the product of the magnitude of the force and the displacement of the object in the direction of the force. Mathematically, work (W) is given by the equation:
W = ∫ F(t) dt
The integral represents the area under the curve of the Force versus time graph. By calculating this integral, we can determine the amount of work done by the force.
Impulse, on the other hand, is defined as the change in momentum of an object and is not directly related to the area under the curve on a Force versus time graph. Momentum is the product of an object's mass and its velocity, and it is also not directly related to the area under the curve on a Force versus time graph.
The magnitude of the impulse on X due to Y is equal to the magnitude of the change in momentum of X. It can be calculated using the equation:
Impulse (J) = Change in momentum (Δp)
The change in momentum of X is given by:
Δp = [tex]m_1 * (v_1 - u_1)[/tex]
Now, let's consider the conservation of momentum equation:
[tex]m_1 * u_1 + m_2 * u_2 = m_1 * v_1 + m_2 * v_2[/tex]
Since Sphere X is moving to the right and Sphere Y is moving to the left, we can assume that Sphere Y collides with Sphere X and comes to rest.
Therefore, the final velocity of Sphere Y ([tex]v_2[/tex]) is 0 m/s.
Plugging in the given values and solving the equation, we can find the final velocity of Sphere X ([tex]v_1[/tex]).
After obtaining the values of [tex]v_1[/tex] and [tex]v_2[/tex], we can calculate the impulse (J) using the change in momentum equation mentioned above.
Comparing the magnitudes of the impulses of Y on X and X on Y, we find that they are equal. Therefore, the correct answer is (e) the same as the magnitude of the impulse of Y on X.
Learn more about momentum here:
https://brainly.com/question/30677308
#SPJ11
A Carnot engine whose hot-reservoir temperature is 400 ∘C∘C has a thermal efficiency of 38 %%.
By how many degrees should the temperature of the cold reservoir be decreased to raise the engine's efficiency to 63 %%?
Express your answer to two significant figures and include the appropriate units.
Answer: The temperature of the cold reservoir should be decreased by 156°C to raise the engine's efficiency to 63%.
A Carnot engine is an ideal heat engine that operates on the Carnot cycle. The efficiency of a Carnot engine depends solely on the temperatures of the hot and cold reservoirs. According to the second law of thermodynamics, the efficiency of a Carnot engine is given by:
efficiency = (Th - Tc)/Th,
where Th is the temperature of the hot reservoir and Tc is the temperature of the cold reservoir.
38% efficiency of a Carnot engine whose hot-reservoir temperature is 400 ∘C is expressed as:
e = (Th - Tc)/Th38/100
= (400 - Tc)/400.
We can solve the above equation for Tc to get:
Tc = (1 - e)Th
= (1 - 0.38) × 400
= 0.62 × 400
= 248°C.
Now, the temperature of the cold reservoir needed to raise the efficiency to 63%.
e = (Th - Tc)/Th63/100
= (Th - Tc)/Th.
We can then solve the above equation for Tc to get:
Tc = (1 - e)Th
= (1 - 0.63) × Th
= 0.37 Th.
We know that the initial temperature of the cold reservoir is 248°C, so we can find the new temperature by multiplying 248°C by 0.37 as follows:
Tc(new) = 0.37 × 248°C
= 92°C.
Therefore, the temperature of the cold reservoir should be decreased by (248 - 92) = 156°C to raise the engine's efficiency to 63%.
Learn more about Carnot engine: https://brainly.com/question/25819144
#SPJ11
Sound level of fireworks At a fireworks show, a mortar shell explodes 25 m above the ground, momentarily radiating 75 kW of power as sound. The sound radiates from the explosion equally efficiently in all directions. You are on the ground, directly below the explosion. Calculate the sound level produced by the explosion, at your location.
The sound level produced by the fireworks explosion at your location is approximately 104.8 dB that can be calculated using the given information of power and distance.
To calculate the sound level produced by the fireworks explosion, we can use the formula for sound intensity level (L), which is given by L = 10 log(I/I0), where I is the sound intensity and I0 is the reference intensity [tex](10^{(-12)} W/m^2)[/tex].
First, we need to calculate the sound intensity (I) at the location directly below the explosion. Since the sound radiates equally in all directions, we can assume that the sound energy is spread over the surface of a sphere with a radius equal to the distance from the explosion.
The power (P) of the sound is given as 75 kW. We can use the formula [tex]P = 4\pi r^2I[/tex], where r is the distance from the explosion (25 m in this case), to calculate the sound intensity (I). Rearranging the formula, we have [tex]I = P / (4\pi r^2)[/tex].
Substituting the values into the formula, we get [tex]I = 75,000 / (4\pi(25^2)) = 75,000 / (4\pi(625)) = 0.03 W/m^2.[/tex]
Now, we can calculate the sound level (L) using the formula L = 10 log(I/I0). Substituting the values, we have[tex]L = 10 log(0.03 / 10^{(-12)}) = 10 log(3 * 10^1^0) ≈ 10 * 10.48 = 104.8 dB.[/tex]
Therefore, the sound level produced by the fireworks explosion at your location is approximately 104.8 dB.
Learn more about sound intensity here:
https://brainly.com/question/32194259
#SPJ11
The force on a particle is directed along an x axis and given by F= F₀(x/x₀ - 1) where x is in meters and F is in Newtons. If F₀ = 2.2 N and x₀ = 5.9 m, find the work done by the force in moving the particle from x = 0 to x = 2x₀ m. Number ______________ Units ________________
A 80 kg block is pulled at a constant speed of 3.8 m/s across a horizontal floor by an applied force of 120 N directed 43° above the horizontal. What is the rate at which the force does work on the block? Number ______________ Units ________________
Answer: 1. The work done by the force in moving the particle from x = 0 to x = 2x₀ m is 3.92 J.
2.The rate at which the force does work on the block is 334 W.
1. Finding the work done by the force in moving the particle from x = 0 to x = 2x₀ m
Using the formula, F= F₀(x/x₀ - 1) where x is in meters and F is in Newtons, and given that F₀ = 2.2 N and x₀ = 5.9 m, we can find the work done by the force in moving the particle from x = 0 to x = 2x₀ m.
The work done by the force is equal to the change in kinetic energy. Therefore, the work done by the force in moving the particle from x = 0 to x = 2x₀ m is given by,
W = K₂ - K₁ = (1/2) mv₂² - (1/2) mv₁²
where v₂ and v₁ are the final and initial velocities, respectively, and m is the mass of the particle. In this case, since the force is in the x-direction, we know that the velocity is in the x-direction as well. Therefore, we can use the kinematic equation:
v² - u² = 2as
where v and u are the final and initial velocities, respectively, a is the acceleration, and s is the displacement. We can solve for the final velocity:v = √(u² + 2as)
Using this equation, we can find the final velocity of the particle at
x = 2x₀ m.
We know that the initial velocity is zero since the particle starts from rest. Therefore,
v₂ = √(0 + 2a(2x₀)) = √(4ax₀)
Using the force equation, we can find the acceleration of the particle:
a = F/m = F₀(x/x₀ - 1)/m
Substituting the values of F₀, x₀, and m, we get
a = (2.2 N)(x/5.9 m - 1)/(1 kg) = (2.2 N/m)(x/5.9 - 1)
v₂ = √(4ax₀)
= √(4(2.2 N/m)(2x₀/5.9 - 1)(5.9 m))
= √(17.6(2x₀/5.9 - 1))
= 2.8 m/s
Now, we can find the work done by the force in moving the particle from x = 0 to x = 2x₀ m. We know that the initial velocity is zero, so the initial kinetic energy is zero.
Therefore, W = (1/2) mv₂² = (1/2)(1 kg)(2.8 m/s)² = 3.92 J.
The work done by the force in moving the particle from x = 0 to x = 2x₀ m is 3.92 J.
2. Given that a 80 kg block is pulled at a constant speed of 3.8 m/s across a horizontal floor by an applied force of 120 N directed 43° above the horizontal.
The rate at which the force does work on the block is given by:
P = Fv cosθ
where P is the power, F is the force, v is the velocity, and θ is the angle between F and v. Substituting the values given, we get
P = (120 N)(3.8 m/s) cos 43°
= (120 N)(3.8 m/s)(0.731)
= 334 W.
The rate at which the force does work on the block is 334 W.
Learn more about work done : https://brainly.com/question/25573309
#SPJ11