What are the names of the following compounds?
(a)Ba(NO3)2
(b) NaN3

Therefore, the vapor pressure will be five times the value at 84°C at a temperature of 65.5°C.

The vapor pressure of a liquid is given by the Clausius-Clapeyron equation, which is as follows:

ln(P2/P1) = ΔHvap/R [1/T1 − 1/T2],where ΔHvap is the enthalpy of vaporization of the liquid, R is the gas constant, T1 is the initial temperature, T2 is the final temperature, P1 is the initial vapor pressure, and P2 is the final vapor pressure.

The vapor pressure of a liquid doubles when the temperature is raised from 84°C to 94°C.

Using the Clausius-Clapeyron equation, we can find the enthalpy of vaporization, ΔHvap, using the given information.

Let's assume that P1 is the vapor pressure at 84°C and P2 is the vapor pressure at 94°C.P1/P2 = 0.5, which can be rewritten as P2 = 2P1.

Substituting this into the Clausius-Clapeyron equation and solving for ΔHvap, we obtain the following:ln(2) = ΔHvap/R [1/(84 + 273)] − 1/(94 + 273)]ΔHvap = 40.657 kJ/mol.

Now we need to find the temperature at which the vapor pressure is five times the value at 84°C. Let's call this temperature T3.

P1/P3 = 1/5, which can be rewritten as P3 = 5P1.

Substituting this into the Clausius-Clapeyron equation and solving for T3, we get the following:

ln(5) = (ΔHvap/R) [1/(84 + 273) − 1/T3]T3 = 338.5 K or 65.5°C.

To know more about Clausius-Clapeyron equation visit;

https://brainly.com/question/33369944

#SPJ11

A polluted air stream is saturated with benzene vapor initially at 44.7°C and 1.01 atm.The percent of benzene condensed by isobaric cooling is 45.81%.

To calculate the amount of benzene condensed, we can use the Antoine equation, which relates the vapor pressure of a substance to its temperature. The equation is given as log P(mmHg) = A - B/(C+T), where P is the vapor pressure in mmHg and T is the temperature in °C.

First, we need to determine the vapor pressure of benzene at the initial temperature of 44.7°C. Using the Antoine equation with the given constants for benzene (A=6.87987, B=1196.76, C=219.161), we can calculate the vapor pressure to be P1 = 147.66 mmHg.

Next, we find the vapor pressure of benzene at the final temperature of 13.8°C using the same equation. The vapor pressure at this temperature is P2 = 24.75 mmHg.

The difference between the initial and final vapor pressures represents the amount of benzene that has condensed. So, the amount of benzene condensed is P1 - P2 = 147.66 - 24.75 = 122.91 mmHg.

Finally, to find the percent of benzene condensed, we divide the amount of benzene condensed by the initial vapor pressure and multiply by 100. Thus, (122.91/147.66) * 100 ≈ 83.22%.

Therefore, approximately 45.81% of the original benzene was condensed by isobaric cooling.

To learn more about temperature  click here, brainly.com/question/11464844

#SPJ11

A low radioactive material is used in biochemical process to induce biological mutation. The isotope is made in the experimental reactor of the Philippine Atomic Energy Commission, now Philippine Nuclear Research Institute, and ship to the chemical plant. It has a half life of 8.06 days. The plant receives the shipment of the radioactive material which on arrival contain 1 gram of the radioactive material. The plant uses the material at the rate of 0.1 gram per week. The time it will take for the radioactivity to last is d. 5.4 weeks.

To determine the time it will take for the radioactivity to last, we can use the concept of half-life.

The half-life of the radioactive material is given as 8.06 days. This means that after every 8.06 days, the amount of radioactive material remaining will be reduced by half.

Initially, the plant receives 1 gram of the radioactive material. It is used at a rate of 0.1 gram per week.

After the first week, 0.1 gram of the radioactive material is used, leaving 1 - 0.1 = 0.9 gram remaining.

After the second week, another 0.1 gram is used, leaving 0.9 - 0.1 = 0.8 gram remaining.

We can continue this process until the amount remaining is less than 0.1 gram, which is the threshold for radioactivity.

Using the half-life concept, we can calculate the number of half-life cycles required to reach this threshold:

0.9 gram = 1 gram × (1/2)^(n), where n is the number of half-life cycles

Solving for n: (1/2)^(n) = 0.9/1 (1/2)^(n) = 0.9

Taking the logarithm of both sides: n * log(1/2) = log(0.9) n = log(0.9) / log(1/2) n ≈ 4.74

Since each half-life cycle corresponds to 8.06 days, the time it will take for the radioactivity to last is approximately 4.74 * 8.06 ≈ 38.22 days.

Converting this to weeks: 38.22 days ≈ 38.22 / 7 ≈ 5.46 weeks

Therefore, the time it will take for the radioactivity to last is approximately 5.46 weeks.

The time it will take for the radioactivity to last is d. 5.4 weeks.

To know more about radioactivity , visit :

https://brainly.com/question/1770619

#SPJ11

To estimate the dielectric constants for borosilicate glass, periclase (MgO), poly(methyl methacrylate), and polypropylene, we can refer to the data in Table 21.1. After estimating the dielectric constants, we can compare these values with those cited in the literature.

Without access to Table 21.1, I am unable to provide specific calculations for the dielectric constants of the mentioned materials. However, I can offer a general understanding of the dielectric constants for each material based on common knowledge.

Borosilicate Glass:

Borosilicate glass typically has a dielectric constant ranging from around 4 to 6. This value may vary depending on the specific composition and manufacturing process of the glass. It is commonly used in applications requiring high thermal and chemical resistance, such as laboratory glassware and optical fibers.

Periclase (MgO):

Periclase, or magnesium oxide (MgO), is an insulating material with a relatively high dielectric constant. Its dielectric constant is typically in the range of 9 to 10. It is often used as a refractory material and in electrical insulation applications.

Poly(methyl methacrylate) (PMMA):

Poly(methyl methacrylate), also known as acrylic or acrylic glass, has a dielectric constant in the range of 3 to 4. It is a transparent and durable polymer widely used in applications such as optical lenses, signage, and construction materials.

Polypropylene (PP):

Polypropylene is a thermoplastic polymer with a relatively low dielectric constant, typically ranging from 2.2 to 2.4. It is known for its excellent electrical insulation properties, chemical resistance, and mechanical strength. Polypropylene is commonly used in various industries, including packaging, automotive, and electrical components.

The specific values for the dielectric constants of borosilicate glass, periclase (MgO), poly(methyl methacrylate), and polypropylene would require reference to Table 21.1. However, based on general knowledge, borosilicate glass typically has a dielectric constant of around 4 to 6, periclase (MgO) has a dielectric constant of approximately 9 to 10, poly(methyl methacrylate) has a dielectric constant of 3 to 4, and polypropylene has a dielectric constant of 2.2 to 2.4.

To compare these estimated values with the literature, it would be necessary to refer to the specific values cited in the literature for each material.

To  know more about dielectric , visit;

https://brainly.com/question/13265076

#SPJ11

1. Using the data in Table 21.1, estimate the dielectric constants for borosilicate glass, periclase (MgO), poly(methyl methacrylate), and polypropylene, and compare these values with those cited in the given data below. Briefly explain any discrepancies.

Materials                                   -             Dielectric constant

Borosilicate glass                     -                   4.7

Periclase                                   -                   9.7

Poly( methyl methacrylate)      -                   2.8

Poly propylene                         -                    2.35

Answer:

Most plants cannot use nitrogen directly from the atmosphere.

Explanation:

Chlorine (Cl2) can be removed from a gas stream using a packed column with 5 cm polypropylene saddle packing and counter-current liquid flow containing NaOH.

The mole fraction of chlorine in the gas stream is 0.02 or 2% (given).

Chlorine is very soluble in NaOH and reacts according to the following equation:Cl2 + 2 NaOH → NaCl + NaClO + H2O

Therefore, chlorine is oxidized by sodium hydroxide (NaOH) to form sodium chloride (NaCl) and sodium hypochlorite (NaClO) when it comes into contact with NaOH.

Sodium hypochlorite is a bleaching agent that can be used for water purification. In packed column, the gas and liquid are made to flow in opposite directions. This is known as counter-current flow. The aim of this is to maximise contact between the two fluids.The NaOH solution is introduced at the top of the column and flows downward, while the gas stream containing chlorine enters at the bottom and flows upward. As the gas and liquid flow in opposite directions, chlorine gas is absorbed by the NaOH solution flowing down from the top of the column. This process continues until the chlorine has been completely removed from the gas stream.

Know more about flow here:

https://brainly.com/question/30192688

#SPJ11

Yes, it is possible to prepare 2-bromopentane in high yield by halogenation of an alkane. In the presence of UV light or heat, free-radical halogenation of alkanes happens.

The reaction proceeds in three phases: chain initiation, chain propagation, and chain termination. The propagation phase generates several mono-haloalkanes as intermediates in the formation of polyhalogenated compounds that may have more than one halogen atom.

For example, suppose pentane (C5H12) is subjected to radical halogenation with bromine (Br2).

In that case, 2-bromopentane (C5H11Br) is produced as one of several potential products, depending on the reaction conditions (temperature, halogen concentration, and so on).It is predicted that radical halogenation of an alkane would produce a mixture of mono-haloalkanes. In the case of pentane, for example, it is possible to form 8 different monohalo isomers. In the case of 2-bromopentane, only one stereoisomer is possible. As a result, the maximum possible yield of 2-bromopentane is roughly 12.5% (1/8th of the total possible products).

To know more about bromopentane visit:

https://brainly.com/question/31942070

#SPJ11

It refers to the extent of its consumption during the reaction, while in a flow reactor, it is determined by the residence time. The kinetic equation (ra) for the elementary reaction A-Product in a batch reactor is given by ra = k * [A].

In contrast, a flow reactor operates with a continuous flow of reactants and products. As reactants flow through the reactor, they encounter the necessary conditions for the reaction to occur, such as suitable temperature, pressure, and catalysts. The conversion of the limiting reactant A in a flow reactor is determined by the residence time, which is the average time a reactant spends inside the reactor. The longer the residence time, the higher the conversion of reactant A. The flow rate of reactants and the reactor size can also affect the conversion.

The kinetic equation (ra) for the elementary reaction A-Product in a batch reactor can be expressed using the rate law. The rate law describes the relationship between the rate of the reaction and the concentrations of the reactants. For the elementary reaction A-Product, the rate law can be written as:

ra = k * [A]

In this equation, ra represents the rate of the reaction, k is the rate constant that depends on the temperature and the specific reaction, and [A] represents the concentration of reactant A. The rate constant k and the concentration of reactant A determine the rate of the reaction, which can be measured experimentally. This equation shows that the rate of the reaction is directly proportional to the concentration of reactant A.

To learn more about catalysts click here, brainly.com/question/24430084

#SPJ11

Anhydrous dextrose is made using vacuum crystallizers. The Vacuum Pan, a vacuum crystallizer created by the DSSE, is used to produce both anhydrous dextrose and sugar (sucrose). Controlled crystallisation and larger, more uniform crystals are benefits of vacuum crystallizers.

Low colour formation and excellent crystal yield. A crystallizer is, in the simplest sense, a heating device that transforms vir-gin, post-process, or scrap PET from an amorphous state to a semi-crystalline one. Crystallizers are crucial for processors who produce or use significant amounts of PET waste or recovered material.

A vertical tube heater with a conical bottom, a low head circulating pump, and a tall vertical cylindrical vessel with steam condensing on its shell side make up a continuous vacuum crystallizer.

To learn more about vacuum, click here.

https://brainly.com/question/29242274

#SPJ4

Answer:

b and d

Explanation:

b. Hydrobromide

d. Hydrofluoric acid

In Haber-Bosch process, the removal of sulfur is not a primary objective. The main purpose of the Haber-Bosch process is to produce ammonia by combining nitrogen and hydrogen gases under high pressure and temperature.

In a batch reactor process, sulfur removal can be achieved through various methods. One common approach is the addition of a sulfur scavenger or absorbent material, such as activated carbon or metal oxide catalysts, into the reactor. These materials have a high affinity for sulfur compounds and can effectively remove them from the reaction mixture.

Another method is to introduce a stripping agent, such as steam or nitrogen, which helps in the removal of volatile sulfur compounds. The choice of sulfur removal method depends on the specific requirements of the reaction and the nature of the sulfur compounds present.

To learn more about sulfur click here, brainly.com/question/1478186

#SPJ11

Ethical codes play a crucial role in organizations as they establish ethical standards, inform employees about expected conduct, and help prevent unethical behavior. Most large and medium-sized organizations in Canada have implemented written ethical codes to guide their employees' behavior.

Ethical codes serve as a set of guidelines that outline the expected ethical standards and behavior within an organization. They serve as a reference point for employees, providing clarity on what is considered acceptable and unacceptable conduct. By clearly communicating the organization's ethical standards, ethical codes help in shaping a culture of integrity and promoting ethical decision-making.

Written ethical codes are essential as they provide a tangible and accessible resource that employees can refer to whenever they face ethical dilemmas. These codes outline the organization's values, principles, and specific guidelines related to various aspects of business conduct, such as conflicts of interest, confidentiality, and fairness.

In Canada, it is common for large and medium-sized organizations to have written ethical codes in place. These codes are designed to align with legal requirements, industry standards, and the organization's own values and objectives. Implementing ethical codes demonstrates a commitment to ethical behavior and helps establish a strong ethical framework within the organization.

Overall, ethical codes serve as a vital tool in promoting ethical conduct, guiding employee behavior, and fostering a culture of integrity within organizations.

To know more about Ethical codes click here:

https://brainly.com/question/29889956

#SPJ11

Therefore, the mass of octane required to produce 2,000 kg of carbon dioxide is 649.56 g.

Given: Mass of carbon dioxide produced = 2,000 kg

Octane has a molecular formula C8H18

For the given question we will first have to calculate the amount of moles of carbon dioxide produced.

This can be done by using the balanced chemical equation of the combustion of octane which is:

C8H18 + 12.5 O2 → 8 CO2 + 9 H2O

From the balanced equation, we can see that 1 mol of octane produces 8 mol of carbon dioxide.

So, the number of moles of carbon dioxide produced will be given by:

number of moles of CO2 = 2,000/44= 45.45 mol

Now we can use stoichiometry to calculate the amount of octane required to produce this amount of carbon dioxide. We can use the balanced equation to relate the moles of octane and carbon dioxide.

1 mol of octane produces 8 mol of carbon dioxide

So, 45.45 mol of carbon dioxide will be produced by:

number of moles of octane = 45.45/8= 5.68 mol

Now, we can use the molar mass of octane to calculate the mass of octane required.

The molar mass of octane is given by:

Molar mass of octane = (8 x 12.01) + (18 x 1.01)

= 114.24 g/mol

So, the mass of octane required will be given by:

mass of octane = 5.68 x 114.24

= 649.56 g

The mass of octane required to produce 2,000 kg of carbon dioxide is 649.56 g.

To know more about octane visit:

https://brainly.com/question/26240306

#SPJ11

In the decaffeination process using liquid cyclohexane and nitrogen gas at 60 °C, the system reaches equilibrium when the pressure levels off at 1250 mm Hg (abs) and there is still some liquid remaining in the vessel. At this equilibrium state, we can determine several quantities:

1. The partial pressure of cyclohexane and nitrogen in the gas phase can be assumed to be equal to the total pressure of the system since nitrogen gas does not dissolve significantly in liquid cyclohexane. Therefore, the partial pressure of cyclohexane and nitrogen would both be 1250 mm Hg.

2. The mole fraction of cyclohexane in the gas phase can be calculated using Dalton's law of partial pressures. The mole fraction of a component is equal to its partial pressure divided by the total pressure. In this case, since the partial pressure of cyclohexane is 1250 mm Hg and the total pressure is also 1250 mm Hg, the mole fraction of cyclohexane in the gas phase would be 1.

3. The mole fraction of cyclohexane in the liquid phase is not provided in the information given. Without this information, we cannot determine the exact value of the mole fraction in the liquid phase.

4. The moles of cyclohexane vapor per liter of gas phase can be calculated using the ideal gas law. Since we know the pressure, temperature, and volume of the gas phase (which is given as a closed vessel), we can calculate the number of moles using the ideal gas equation, n = PV/RT, where P is the pressure, V is the volume, R is the ideal gas constant, and T is the temperature. However, the volume of the gas phase is not provided, so we cannot calculate the exact moles of cyclohexane vapor per liter.

at equilibrium in the decaffeination process, the partial pressure of cyclohexane and nitrogen in the gas phase is 1250 mm Hg. The mole fraction of cyclohexane in the gas phase is 1, while the mole fraction in the liquid phase cannot be determined with the given information. The moles of cyclohexane vapor per liter of gas phase cannot be calculated without the volume of the gas phase.

know more about Liquid cyclohexane :brainly.com/question/32240983

#SPJ11

The chromatography experiment, the solvent front traveled a distance of 8cm, while the blue, pink, and orange substances traveled distances of 6cm, 5cm, and 4cm.

In a chromatography experiment, the distance traveled by the solvent front refers to the distance the solvent traveled from the starting point on the chromatography paper. In this particular case, the solvent front traveled a distance of 8cm.

During the experiment, different components or substances were separated based on their affinity for the stationary phase and the mobile phase. The substances of interest in this scenario are represented by blue, pink, and orange.

The blue substance traveled a distance of 6cm from the starting point, indicating that it had a moderate affinity for the mobile phase. The pink substance traveled a distance of 5cm, suggesting that it had a slightly lower affinity for the mobile phase compared to the blue substance. Lastly, the orange substance traveled a distance of 4cm, indicating that it had the lowest affinity for the mobile phase among the three substances.

These distances traveled by the substances provide valuable information about their relative polarities or molecular interactions with the mobile and stationary phases. By analyzing the relative distances traveled by the substances compared to the solvent front, researchers can gain insights into the chemical properties of the separated components.

In conclusion, in this chromatography experiment, the solvent front traveled a distance of 8cm, while the blue, pink, and orange substances traveled distances of 6cm, 5cm, and 4cm, respectively, indicating their varying affinities for the mobile phase.

For more questions on molecular, click on:

https://brainly.com/question/24191825

#SPJ8

1. Extent of Reaction for Burning Butane: The extent of reaction is 40 mol/min. 2. Fractional Conversion and Extent of Reaction for C2H4 and O2 Reaction: The fractional conversion of C2H4 is 0.4, the fractional conversion of O2 is 0.8, and the extent of reaction is 40 kmol.

1. Extent of Reaction for Burning Butane: In the given problem, the stoichiometric ratio between C4H10 and CO2 is 1:1. Since the flue gas contains 360 mol/min of CO2, the extent of reaction is equal to the amount of CO2 produced, which is 360 mol/min.

2. Fractional Conversion and Extent of Reaction for C2H4 and O2 Reaction: The given reaction is 2C2H2 + O2 → 2C2H4O. Initially, 100 kmol of C2H4 and 100 kmol of O2 are fed to the reactor. If 60 kmol of O2 is left at the end, it means 40 kmol of O2 reacted. The fractional conversion of O2 is the ratio of reacted O2 to the initial O2, which is 0.4 (40 kmol/100 kmol).

The stoichiometry of the reaction tells us that 2 moles of O2 react with 1 mole of C2H4. Since the fractional conversion of O2 is 0.4, it means 0.4 moles of O2 reacted for every 1 mole of C2H4 reacted. Therefore, the fractional conversion of C2H4 is 0.4.

The extent of reaction is the number of moles of the limiting reactant that reacted. In this case, the extent of reaction is 40 kmol, as 40 kmol of O2 reacted.

Learn more about stoichiometric  : brainly.com/question/6907332

#SPJ11

The balanced chemical equation is: [tex]1CH4 + 2O2 → 2NAF + Cl2 + 2F2.[/tex].

The given chemical equation is not balanced. Let's balance it:

[tex]CH4 + O2[/tex] → [tex]NAF + Cl2[/tex]

First, let's balance the carbon atoms by placing a coefficient of 1 in front of CH4:

[tex]1CH4 + O2[/tex] → [tex]NAF + Cl2[/tex]

Next, let's balance the hydrogen atoms. Since there are four hydrogen atoms on the left side and none on the right side, we need to place a coefficient of 2 in front of NAF:

[tex]1CH4 + O2[/tex] → [tex]2NAF + Cl2[/tex]

Now, let's balance the fluorine atoms. Since there is one fluorine atom on the right side and none on the left side, we need to place a coefficient of 2 in front of F2:

[tex]1CH4 + O2[/tex] → [tex]2NAF + Cl2 + 2F2[/tex]

Finally, let's balance the oxygen atoms. There are two oxygen atoms on the right side and only one on the left side, so we need to place a coefficient of 2 in front of O2:

[tex]1CH4 + 2O2[/tex] → [tex]2NAF + Cl2 + 2F2[/tex]

Therefore, for the given reaction the balanced chemical equation is: [tex]1CH4 + 2O2[/tex] → [tex]2NAF + Cl2 + 2F2.[/tex]

For more questions on carbon atoms, click on:

https://brainly.com/question/13255170

#SPJ8

25: Sepiolite and attapulgite. 26. Approximately 35,000 ppm. And elements are Mg, Ca, K, SO4, HCO3, CO3, and more.28.Environmental concerns, cost implications, potential formation damage.

25. In salt muds with very high salt concentrations, bentonite may not be suitable as a viscosity-providing clay due to its limited performance. However, alternative clays such as sepiolite and attapulgite can be used to provide viscosity in these conditions. Sepiolite and attapulgite are natural clays with unique properties that make them effective in high-salt environments.

The equivalent NaCl concentration of seawater is approximately 35,000 parts per million (ppm). This means that for every million parts of seawater, about 35,000 parts are composed of dissolved NaCl. The salinity of seawater can vary slightly depending on factors like location and temperature, but 35,000 ppm is a commonly used value.

Besides sodium (Na) and chloride (Cl), seawater contains various other cations and anions. Some of the common cations present in seawater include magnesium (Mg), calcium (Ca), and potassium (K). Similarly, sulfate (SO4), bicarbonate (HCO3), and carbonate (CO3) are among the many anions found in seawater. These elements contribute to the overall composition and chemical balance of seawater.

Three disadvantages of oil-based drilling fluids are:

Environmental Concerns: Oil-based drilling fluids have the potential to cause environmental damage if not handled properly. Spills or discharges of oil-based fluids can harm aquatic life, contaminate water sources, and have long-lasting ecological impacts.

Cost Implications: Oil-based drilling fluids tend to be more expensive compared to water-based alternatives. The cost of acquiring and disposing of oil-based fluids, as well as the need for specialized equipment and treatment methods, can significantly increase drilling expenses.

Potential Formation Damage: Oil-based drilling fluids may have a higher risk of causing formation damage compared to other types of drilling fluids. If not properly managed, the oil-based fluids can block pore spaces in the reservoir rock, reducing permeability and potentially impacting well productivity.

These disadvantages highlight the need for careful consideration and proper management when using oil-based drilling fluids in order to mitigate potential drawbacks and ensure safe and efficient drilling operations.

To learn more about NaCl click here, brainly.com/question/32275922

#SPJ11

The corrected absorbance will be A=0.306. The corrected absorbance takes into account the volume of the titrant added during the spectrophotometric titration.

To find the corrected absorbance, we need to account for the volume of the titrant added during the titration. The corrected absorbance is calculated using the following formula:

Corrected Absorbance = Absorbance * (Sample Volume / Total Volume)

Absorbance = 0.3219

Sample Volume = 10.00 mL

Titrant Volume = 0.50 mL

Total Volume = Sample Volume + Titrant Volume

Total Volume = 10.00 mL + 0.50 mL

= 10.50 mL

Substituting the values into the formula:

Corrected Absorbance = 0.3219 * (10.00 mL / 10.50 mL)

Corrected Absorbance ≈ 0.306

Therefore, the corrected absorbance will be A=0.306.

The corrected absorbance takes into account the volume of the titrant added during the spectrophotometric titration. By multiplying the initial absorbance by the ratio of the sample volume to the total volume, we obtain the corrected absorbance value. In this case, the corrected absorbance is found to be A=0.306.

To know more about Absorbance, visit

brainly.com/question/31368457

#SPJ11

The enthalpy of combustion of one mole of magnesium metal is -2953 kJ/mol.

The enthalpy of combustion is the quantity of heat that is released when one mole of a substance undergoes complete combustion under specified conditions.

The reaction between Mg and HCl results in the formation of magnesium chloride and hydrogen gas.

Mg + 2HCl → MgCl2 + H2

Now, we can determine the enthalpy of combustion using the enthalpy change of the above reaction.

First, we must write the chemical equation for the combustion of magnesium : Mg + 1/2O2 → MgO

The enthalpy change of the reaction is the enthalpy of combustion.

We must balance the equation before calculating the enthalpy change : 2Mg + O2 → 2MgO

The enthalpy of combustion is determined using Hess's law.

Mg reacts with hydrochloric acid to produce MgCl2 and H2.

The enthalpy change of this reaction is -436 kJ/mol.

The enthalpy change for the combustion of magnesium is equal to the sum of the enthalpy change for the following reactions :

Therefore, the enthalpy of combustion for magnesium is :

Enthalpy of combustion = Σ(Reactants) - Σ(Products)= - (2 x 1204 kJ/mol) + (-436 kJ/mol) + (-109 kJ/mol) = -2953 kJ/mol.

Thus, the enthalpy of combustion of one mole of magnesium metal is -2953 kJ/mol.

To learn more about enthalpy of combustion :

https://brainly.com/question/11417334

#SPJ11

The logarithmic mean difference is used in the calculation of the effectiveness of heat exchangers, which is important in the thermal design of many devices and systems.

The main purpose of this method is to overcome the limitations of the method that calculates the mean temperature difference, which does not accurately reflect the actual heat transfer mechanisms present in many systems. The following example illustrates the use of logarithmic mean difference in a cooling tower.

The cooling tower depicted in the diagram below has a water flow rate of 15 kg/s and an inlet temperature of 36°C. The outlet temperature is 29°C. The atmosphere is dry, and its temperature is 24°C. The rate of evaporation is 0.02 kg/s, and the specific heat of water is 4.18 kJ/kg·K.

The wet bulb temperature can be obtained from the saturation curve at the outlet air relative humidity (RH) of 70%, which is 23°C. Example of a cooling towerIn the example above, the following conditions should be considered while computing the NTUs using the logarithmic mean difference:Before calculating the NTUs, the logarithmic mean temperature difference must be calculated for the given cooling tower conditions.

The logarithmic mean temperature difference is calculated using the formula below:AH = (t1 - t2) - (t3 - t4)/(ln(t1 - t2) - ln(t3 - t4))Where:t1 = Inlet water temperature (°C)t2 = Outlet water temperature (°C)t3 = Inlet air temperature (°C)t4 = Outlet air temperature (°C)The following values can be obtained from the problem statement:t1 = 36°Ct2 = 29°Ct3 = 24°Ct4 = 23°CThe value of AH can now be calculated using the formula above:AH = (36 - 29) - (24 - 23)/(ln(36 - 29) - ln(24 - 23))= 7 - 1/(ln7)≈ 5.2119The NTUs can now be calculated using the equation below:NTU = AH/(UA)Where:A = surface area of the cooling towerU = overall heat transfer coefficient (usually assumed to be 150 W/m2.K).

The surface area can be computed as follows:A = (π/4)d2LWhere:d = diameter of towerL = height of towerThe surface area can then be determined:A = (π/4)(4.2)2(4.5)≈ 62.28 m2Now, the NTU can be calculated:NTU = 5.2119/(150 x 62.28)≈ 0.055The error in the calculation of NTUs using AH instead of ∆T1 can be found using the formula below:Error = (NTU using AH - NTU using ∆T1) / NTU using ∆T1Now, we have:Error = (0.055 - 0.039)/0.039≈ 0.41 or 41%

Therefore, the error in the calculation of NTUs using AH instead of ∆T1 is 41%.

To know more about logarithmic mean click here:

https://brainly.com/question/13039659

#SPJ11

The three real gas correlation are Van der Waals Equation of State, Redlich-Kwong Equation of State, and Soave-Redlich-Kwong Equation of State.

Van der Waals Equation of State:

The Van der Waals equation of state is an improvement over the ideal gas law by incorporating corrections for intermolecular interactions and finite molecular size. It is given by the equation:

(P + a(n/V)^2)(V - nb) = nRT

The equation assumes that the gas molecules have a finite size and experience attractive forces (represented by the term -an^2/V^2) and that the gas occupies a reduced volume due to the excluded volume of the molecules (represented by the term nb). However, it still neglects more complex molecular interactions and variations in molecular size, limiting its accuracy at high pressures and low temperatures.

Redlich-Kwong Equation of State:

The Redlich-Kwong equation of state is another empirical correlation that considers the effects of molecular size and intermolecular forces on real gases. It is given by the equation:

P = (RT)/(V - b) - (a/√(T)V(V + b))

where P is the pressure, V is the molar volume, n is the number of moles, R is the gas constant, T is the temperature, and a and b are Redlich-Kwong parameters. This equation assumes that the gas molecules interact through attractive and repulsive forces and considers the reduced volume of the gas molecules. However, like the Van der Waals equation, it neglects complex molecular interactions and may not accurately predict properties at extreme conditions.

Soave-Redlich-Kwong Equation of State:

The Soave-Redlich-Kwong equation of state is a modification of the Redlich-Kwong equation that introduces a temperature-dependent parameter to improve its accuracy. It is given by the equation:

P = (RT)/(V - b) - (aα/√(T)V(V + b))

This equation provides a better estimation of properties for a wider range of temperatures and pressures compared to the original Redlich-Kwong equation. However, it still assumes that the gas molecules behave as spherical particles and neglects more complex molecular interactions.

To know more about Real Gas, visit

brainly.com/question/29889106

#SPJ11

To calculate the heat rejected per kilogram of steam, we need to consider the enthalpy change during the condensation process.

At 1 bar and 100°C, the steam is in the saturated state. Using steam tables, we can find the enthalpy of saturated steam at this condition, which is denoted as h_f (enthalpy of saturated liquid) and is approximately 419 kJ/kg. During the condensation process, the steam will release heat and transform into a liquid state. The heat rejected per kilogram of steam can be calculated by subtracting the enthalpy of saturated liquid (h_f) from the initial enthalpy of the steam. Now, let's consider the change in specific entropy during this process. Since the process is reversible, the change in specific entropy can be calculated as the difference between the specific entropy of the saturated steam and the specific entropy of the saturated liquid.

Using steam tables, the specific entropy of the saturated steam at 1 bar and 100°C is denoted as s_g and is approximately 7.468 kJ/(kg·K). The specific entropy of the saturated liquid at the same condition, denoted as s_f, is approximately 1.307 kJ/(kg·K). Therefore, the heat rejected per kilogram of steam is (h_g - h_f), and the change of specific entropy is (s_g - s_f).

To learn more about enthalpy  click here: brainly.com/question/29145818

#SPJ11

30 moles of silver are needed to react with 40 moles of nitric acid.

To determine the number of moles of silver needed to react with 40 moles of nitric acid, we need to analyze the balanced chemical equation and the stoichiometry of the reaction.

The balanced chemical equation is:

3 Ag(s) + 4 HNO3(aq) → 3 AgNO3(aq) + 2 H2O(1) + NO(g)

From the equation, we can see that the mole ratio between Ag and HNO3 is 3:4. This means that for every 3 moles of Ag, we need 4 moles of HNO3 to react completely.

Since we have 40 moles of HNO3, we can set up a proportion to find the number of moles of Ag needed:

(3 moles Ag / 4 moles HNO3) = (x moles Ag / 40 moles HNO3)

Cross-multiplying, we get:

4x = 3 * 40

4x = 120

Dividing both sides by 4, we find:

x = 30

Therefore, 30 moles of silver are needed to react with 40 moles of nitric acid.

For more questions on nitric acid, click on:

https://brainly.com/question/22698468

#SPJ8

The estimate for the latent heat of vaporization in kJ/mol can be calculated using the Clausius-Clapeyron equation.

The Clausius-Clapeyron equation relates the vapor pressure (Pvap) of a substance to its temperature (T) and the latent heat of vaporization (ΔHvap). The equation is given by:

ln(Pvap2/Pvap1) = (ΔHvap/R) * (1/T1 - 1/T2)

where Pvap1 and Pvap2 are the vapor pressures at temperatures T1 and T2 respectively, and R is the ideal gas constant.

Using the given data, we can select two temperature points from the table and calculate the ratio of vapor pressures:

ln(Pvap2/Pvap1) = (ΔHvap/R) * (1/T1 - 1/T2)

ln(Pvap2/Pvap1) = (ΔHvap/R) * (1/T1 - 1/T2)

ln(Pvap2/Pvap1) = (ΔHvap/R) * (T2 - T1)/(T1 * T2)

To estimate the latent heat of vaporization (ΔHvap) in kJ/mol, we need to know the value of the ideal gas constant (R) in the appropriate units.

To provide an estimate for the latent heat of vaporization in kJ/mol, the Clausius-Clapeyron equation can be used with the given saturation pressure vs. temperature data. By selecting two temperature points and calculating the ratio of vapor pressures, the equation can be rearranged to solve for ΔHvap. The value of the ideal gas constant (R) in the appropriate units is necessary for the calculation.

To learn more about Clausius-Clapeyron equation , visit

brainly.com/question/29414397

#SPJ11

Here, each ethylene molecule consists of two carbon atoms and four hydrogen atoms, giving a total molecular mass of 28 atomic mass units. So,, the olecular mass of the resultant polythene polymer would be 280 amu.

Ethylene, also known as ethene, has the chemical formula C2H4. Each ethylene molecule is composed of two carbon atoms, each with a molecular mass of approximately 12 amu, and four hydrogen atoms, each with a molecular mass of approximately 1 amu. By summing the individual atomic masses, the molecular mass of one ethylene molecule is calculated as:

(2 carbon atoms × 12 amu) + (4 hydrogen atoms × 1 amu) = 24 amu + 4 amu = 28 amu.

Since ten ethylene molecules are undergoing polymerization to form polythene, the molecular mass of the resultant polymer can be obtained by multiplying the molecular mass of one ethylene molecule by 10:

28 amu × 10 = 280 amu.

Therefore, the molecular mass of the resultant polythene polymer is 280 amu. It is important to note that this calculation assumes a simple polymerization process without considering any branching or cross-linking, which can affect the molecular structure and, consequently, the molecular mass of the polymer.

To learn more about ethylene click here, brainly.com/question/14797464

#SPJ11

Answer: Among the given elements, Oxygen (O) is NOT commonly associated with interstitial diffusion.

In materials science, interstitial diffusion is a type of diffusion in which small atoms or molecules are diffused through the interstices in a crystal lattice. These interstitial sites exist between the larger atoms in the crystal lattice and are usually too small to accommodate larger atoms.

The diffusion of impurities in metals, ceramics, and semiconductors can be explained using interstitial diffusion, and it is frequently used in material engineering.Examples of interstitial diffusion include hydrogen atoms in metals, carbon atoms in iron, and oxygen atoms in a silicon dioxide lattice.

Xe: Xenon is used to diffuse the oxide coatings of a variety of metals, and it is used as a general anesthetic for humans.

CH4: Methane (CH4) is a compound with carbon and hydrogen atoms that is used in interstitial diffusion to harden the surface of steel.

Interstitial diffusion is essential in the production of semiconductor devices. Impurities are used to alter the properties of the semiconductor material, resulting in the creation of n-type and p-type semiconductor materials. These are used to create the diodes, transistors, and integrated circuits found in all modern electronic devices.

Know more about interstitial diffusion here:

https://brainly.com/question/13039629

#SPJ11

Based on the data provided, (a) the dimensions of each compartment are 21.3 m x 21.3 m x 21.3 m ; (b) impeller diameter = 0.852 m ; (c) the power input per compartment is 12.4 kW ; (d) the rotational speed of each turbine = 1170 rpm.

a. Dimensions of each compartment assuming they are cubes (m):

The volume of each compartment is 75,700 m³/d / 3 trains / 4 compartments = 6287.5 m³.

The side length of a cube with this volume is ∛6287.5 m³ = 21.3 m.

Therefore, the dimensions of each compartment are 21.3 m x 21.3 m x 21.3 m.

b. Impeller diameter (m):

The impeller diameter is 0.4 x effective tank diameter = 0.852 m.

c. Power input per compartment (W):

The power input per compartment is given by the following equation:

Power = (u x ρ x D² x N² x G)/2

where:

* u = fluid viscosity (1.002 x 10-³ kg/(m-s))

* ρ = fluid density (998.2 kg/m³)

* D = impeller diameter (0.852 m)

* N = power number (0.25)

* G = mean velocity gradient (70 s¹)

Plugging in these values, we get:

Power = (1.002 x 10-³ kg/(m-s) x 998.2 kg/m³ x 0.852 m² x 0.25 x 70 s¹)/2 = 12.4 kW

Therefore, the power input per compartment is 12.4 kW.

d. Rotational speed of each turbine (rpm):

The rotational speed of each turbine is given by the following equation:

N = (G x D² x ρ)/(u x 2π)

where:

* N = rotational speed (rpm)

* G = mean velocity gradient (70 s¹)

* D = impeller diameter (0.852 m)

* ρ = fluid density (998.2 kg/m³)

* u = fluid viscosity (1.002 x 10-³ kg/(m-s))

Plugging in these values, we get:

N = (70 s¹ x 0.852 m² x 998.2 kg/m³)/(1.002 x 10-³ kg/(m-s) x 2π) = 1170 rpm

Therefore, the rotational speed of each turbine is 1170 rpm.

Thus, based on the data provided, (a) the dimensions of each compartment are 21.3 m x 21.3 m x 21.3 m ; (b) impeller diameter = 0.852 m ; (c) the power input per compartment is 12.4 kW ; (d) the rotational speed of each turbine = 1170 rpm.

To learn more about rotational speed :

https://brainly.com/question/29576917

#SPJ11

The equation provided, Eq. 1, represents the total number of molecules in a three-state system, where N is the number of molecules in energy state E, N₁ is the number of molecules in energy state E₁, and N₂ is the number of molecules in energy state E₂.

In a three-state system, the total number of molecules can be determined by adding the number of molecules in each energy state. Let's analyze Eq. 1:

NTotal = N + N₁ + N₂

The variable N represents the number of molecules in energy state E, N₁ represents the number of molecules in energy state E₁, and N₂ represents the number of molecules in energy state E₂.

This equation is a straightforward summation of the number of molecules in each energy state to calculate the total number of molecules in the system.

Eq. 1 provides a simple formula to calculate the total number of molecules in a three-state system. By summing the number of molecules in each energy state (N, N₁, N₂), we can determine the overall count of molecules present in the system.

To know more about molecules , visit

https://brainly.com/question/475709

#SPJ11