Water is used as an ekman spiral fluid layer.
What do water spirals go by?The Coriolis effect results in the Ekman spiral, which was proposed in 1902 by Swedish physicist Vagn Walfrid Ekman (1874–1954). Because of the wind's force, surface water molecules move, dragging deeper layers of water molecules with them.
The Ekman layer is how thick?Ekman layer, a vertical area of the ocean subject to surface water movement caused by wind. This layer, which bears the name V. Walfrid Ekman after a Swedish oceanographer, is around 100 meters deep (about 300 feet).
To know more about Ekman spiral fluid visit :-
https://brainly.com/question/14440533
#SPJ1
7. geophysical evidence suggests that lineaments in an exploration area may trend 60 degrees west. a. in order to enhance these lineaments, what are the two optimum radar look directions?
60 degrees east or west would be the two optimum radar look directions.
Why 60 degree?The optimum radar look directions for enhancing lineaments that trend 60 degrees west would be 60 degrees east and 60 degrees west.
This is because radar look directions are generally chosen to be perpendicular to the direction of the lineaments, as this allows the radar to "see" the lineaments more clearly and provide better resolution.
In this case, a look direction of 60 degrees east or west would be perpendicular to the lineaments, which would provide the best possible radar imaging of the lineaments in the exploration area.
To Know More About Geography, Check Out
https://brainly.com/question/1462956
#SPJ1
n ideal transformer has 20 turns on its primary side and 90 turns on its secondary side. the primary side has 200 volts and 50 amps. what are the voltage and current on the secondary side
Below is the solution of the voltage and current on the secondary side when an ideal transformer has 20 turns on its primary side and 90 turns on its secondary side.
Step-by-step solution -
Given,
[tex]V_{P} = 200V\\N_{P} = 20\\N_{S} = 90[/tex]
For Transformer -
[tex]\frac{V_{P}} {V_{S}} = \frac{N_{P}} {N_{S}}[/tex]
[tex]\frac{200} {V_{S}} = \frac{20} {90}[/tex]
[tex]V_{S} = \frac{1800}{2} = 900 V[/tex]
For Ideal transformer ,
[tex]P_{OUT} = P_{IN}}[/tex]
200 x 50 = 900 x [tex]I_{S}[/tex]
[tex]I_{S}[/tex] = 100/9 A.
What is an Ideal Transformer?
A perfect transformer is one that has no losses, such as copper or core. This transformer's output power is equal to its input power. This transformer's efficiency is 100%, which means there is no power loss within the transformer.
What is a Transformer?
A transformer is a fixed electrical device that is used to transfer electrical energy between two circuits while maintaining a constant frequency and increasing or decreasing the current or voltage.
To know more about Ideal Transformer, visit: https://brainly.com/question/23870167
#SPJ4
The data model contains the Official entity that has an array key called Reports of the type Report. The Report entity has a typekey field called ReportType (with possible typecodes 'inspection', 'state', 'police'). Given the variable: var thisOfficial : Official Which expression represents the correct approach to retrieve a single array element with ReportType 'police'? thisofficial. Reports.firstwhere(\r→r. ReportType=−ReportType.TC. POLICE) thisofficial.Reports. first(\->r.ReportType=wtypekey. ReportType.TC. POLICE) thisofficial. Reports.hasMatch(\r→rr. ReportType = a typelist. ReportType.TC POLICE) exists (report in thisofficial.Reports where report. Reporttype==typekey.ReportType.TC.POLICE) thisofficial. Reports". ReportType==ReportType. TC POLICE
The expression that represents the correct approach to retrieve a single array element with ReportType 'police' is:
thisOfficial.Reports.hasMatch(\ r -> r.ReportType == typelist.ReportType.TC_POLICE)
What is an array element?Information is stored in arrays. An array is made up of a group of elements used to store data. A scalar integer number called an index, which is assigned to each element in an array, is what makes up the indexing system.
The data size and the data type or data representation of an array's elements must be the same.
On the base address of the array is the first element.
To determine the element's position (or address), which is used to retrieve the element's actual value, three factors must be considered: the base address, the size of the data type, and the index.
Learn more about array
https://brainly.com/question/28565733
#SPJ4
An inflow hydrograph is given for a reservoir that has a weir-spillway outflow structure. The flow through the spillway is governed by the equation ) Q = 3.75Ly3/2 (cfs), where L is the length of the weir and y is the height of the water above the spillway crest. The storage in the reservoir is governed by S = 300y (ac-ft). Using A1 = 10 hr, L = 15 ft, and So = lo = 0, route the inflow hydrograph through the reservoir using the storage indication method. Time (hr) Inflow (cfs) 12 24 36 48 60 72 84 96 108 120 132 144 156 40 35 37 125 340 575 722 740 673 456 250 140 10
A hydrograph is a graph that shows the stream flow over time. The inflow hydrograph of the given question is given below.
What is a graph?In discrete mathematics, more specifically in graph theory, a graph is a structure that amounts to a set of objects in which some pairs of the objects are conceptually "related."
The objects correspond to mathematical abstractions known as vertices (also known as nodes or points), and each of the related pairs of vertices is known as an edge (also called link or line).
In diagrammatic form, a graph is typically represented as a collection of dots or circles for the vertices and lines or curves for the edges. In discrete mathematics, graphs are one of the topics of study.
Inflow and outflow hydrograph through the reservoir using the storage indication method (see the attachment).
Learn more about hydrograph
https://brainly.com/question/29658984
#SPJ4
Suppose you are a part of Qatar''''s best software team named "the Photon Intelligence Team" and you are required to set up a detailed alert system to secure the data of all the football fans who are coming to watch football matches.
Metro trains are typically vacant during the day but may be busy at night.
What widespread interest from all throughout the world?But there were doubts about how it'd work in practice and how the city would handle the alleged influx of much more than a million images once the event started.
Michael Edgley, head of the Green and Gold Army, claimed that although some confusing transport management was presenting challenges for tour buses, it was a similar story for his traveling group of Socceroos family and supporters.
Because of the traffic restrictions, walking for fall and pick-ups around the stadiums can be difficult, but for numerous people, it is still the more convenient option.
To know more about the alleged influx visit:
https://brainly.com/question/14299924
#SPJ 1
Your consulting firm is asked to design an activated carbon adsorption system to treat contaminated groundwater containing
10mg/L of benzene with a treatment goal of 99% reduction in benzene concentration before injection into groundwater. The extraction well pumps groundwater at
100gpm. The activated carbon removal capacity is expressed as the following Freundlich equation:
q(mg/g)=2C0.2, where C is the concentration (mg/L) of benzene after adsorption equilibrium. (a) What is the amount of activated carbon (kg) needed per day?(428.3 kg)
(b) If the packing density of activated carbon is 1.2 g/cm, how many 55-gallon tanks it would fill? Approximate to the nearest number exceeding the amount of activated carbon required.(∼2tanks)
(a) The amount of activated carbon (kg) needed per day is 4319.327 kg per day.
(b) If the packing density of activated carbon is 1.2 g/cm, no. of 55-gallon tanks it would fill is 18 .
What is activated carbon?An element called activated carbon or activated charcoal has pores that can trap compounds, primarily organic ones, that are present in a gas or liquid. It accomplishes this with such efficiency that it is the purifying agent that people use the most frequently.
Chains of carbon and hydrogen atoms make up the fundamental structure of organic compounds, which are produced by the metabolism of living things. All of the derivatives from the plant and animal kingdoms, including oil and the compounds made from it, are included in this group.
Adsorption is the ability of a solid to hold onto the walls of a moving molecule. Adsorbent refers to the solid, and adsorbate refers to the molecule.
No other single purification method has more applications than activated carbon, which is used to retain solids that are present in a fluid after filtration.
Learn more about activated charcoal
https://brainly.com/question/29548411
#SPJ1
technician a says a torsion bar is a type of shock absorber. technician b says shock absorbers slow the upward and downward movement of the vehicle after a bump. who is correct?
A torsion isn't part of the shock absorber. Hence, technician A is wrong and technician B is correct.
The suspension system allows the wheel to up and down over bumps in the road. The suspension system makes the wheels and tires to up and down to absorb the shock from bumps. The rubber tires and air in the tires also slow down the ride over hard surfaces and conform to slightly uneven and rough surfaces. Thus, technician B is correct. Meanwhile, the technician A is wrong because a torsion isn't kind of shock absorber.
Kind of shock absorbers are:
Standard telescopic shocks. Struts. Spring seat.Learn more about shock absorbers, here https://brainly.com/question/10838031
#SPJ4
in order to calculate the dispersion of contaminants in a room, one can use a large number of langrangian particles in a random process.TrueFalse
True. The dispersion of contaminants in a room can be modeled using a large number of Lagrangian particles in a random process. In this approach, the movement of each particle is tracked as it moves through the room, and the concentration of contaminants at different points in the room is calculated based on the distribution of the particles. This allows researchers to understand how the contaminants will spread throughout the room and how long they will remain in the air.
Lagrangian particle modeling is a useful tool for predicting the dispersion of contaminants in indoor environments, as it takes into account the influence of the room's geometry and the flow of air within the space. It can be used to evaluate the effectiveness of ventilation systems and to identify potential areas of high contaminant concentrations that may pose a risk to the occupants of the space.
Overall, the use of Lagrangian particles in a random process is a useful technique for understanding the dispersion of contaminants in indoor environments and for identifying strategies to reduce the risks associated with exposure to these contaminants.
Learn more about Lagrangian, here https://brainly.com/question/13195233
#SPJ4
Ramon, a software engineer at Frensen Inc., needs to develop high-quality graphic illustrations for presentation at his next team meeting. In the context of application software, he must use ____ software to accomplish thi:sA desktop publishing B spreadsheet C database D word processing
In the context of application software, he must use desktop publishing software to accomplish this. Therefore, the correct answer option is: A. desktop publishing.
What is an application software?In Computer technology, an application software can be defined as a type of software program which is designed and developed to enable end users perform a variety of tasks on a computer system such as desktop publishing (DTP).
What is Microsoft Publisher?Microsoft Publisher can be defined as a desktop publishing application software or program that is designed and developed by Microsoft Inc., in order to avail its end users an ability or opportunity to work on page layout and graphic design such as a flier or graphic illustrations for presentation.
Read more on Microsoft Publisher here: brainly.com/question/26717262
#SPJ1
Although not limited by the NEC, if a 15-amp residential circuit is to be loaded only up to its rating, how many outlets can be put on the 120-volt circuit if the outlets are rated at 120 VA per outlet? Select one: a. 15 b. 1 c. 20 d. 8 e. 9
Although not limited by the NEC, if a 15-amp residential circuit is to be loaded only up to its rating, The number of outlets that can be put on the 120-volt circuit if the outlets are rated at 120 VA per outlet are 15 (Option A).
What is a residential circuit?These are similar to the wire systems in your home, but they can be as large as the power lines outside. Power circuits are required when a considerable volume of electricity has to be transmitted and managed.
The majority of your home's typical 120-volt domestic circuits are (or should be) parallel circuits. Outlets, switches, and light fixtures are connected such that the hot and neutral wires form a continuous circuit pathway separate from the various devices that consume electricity from the circuit.
Learn mroe about the residential circuit:
https://brainly.com/question/13053867
#SPJ1
technician a says liquid cooling an engine maintains a constant operating temperature. technician b says that air cooling lets the engine operate more efficiently. who is correct?
Technician A is correct. The liquid cooling an engine maintains a constant operating temperature. Technician B is wrong because the usage of air condition can increase fuel consumption by up to 20%.
Component of systems are a radiator to dissipate heat, a fan or fans to ensure adequate airflow for radiator cooling, a thermostat valve that opens when the desired operating temperature is reached and a water pump (or coolant pump) to circulate coolant through the engine, hoses and other elements. The engine cooling system has responsible for holding it at a stable temperature to avoid damage to the vehicle. There are two kind of cooling systems for engines:
Air cooling system. Water cooling system.Learn more about cooling engine system, here https://brainly.com/question/14557991
#SPJ4
in a jfet, the u- shaped region is called the and is flush with the upper surface of the substrate.
The U-shaped area in a JFET is known as the channel and is flush with the substrate's upper surface.
The concept of a surface as it pertains to mathematics is called a surface. It is a generalization of a plane, just like a curve generalizes a straight line, but unlike a plane, it may be curved. There are a number of more precise definitions, depending on the circumstance and the mathematical techniques used for the study. Planes and spheres are the most fundamental mathematical surfaces in Euclidean 3-space. The specific description of a surface may vary depending on the circumstances. In topology or differential geometry, a surface rarely crosses itself. this is not the case in algebraic geometry. Since a surface is a two-dimensional topological space, a moving point on a surface can only travel in one of two directions.
Learn more about surface from
brainly.com/question/1297098
#SPJ4
A catalytic converter has to be at least how hot before it begins to work?
Answer:
Normal operating temperatures of a converter are 500-800°F, and up to 1200°F when the vehicle is under heavy load.To melt the catalytic converter's substrate, the temperature inside the converter would have to exceed 2000°F.
Explanation:
c agevalue and weightvalue are read from input. declare and assign pointer mydog with a new dog object. then, set mydog's age and weight to agevalue and weightvalue, respectively.
Following is the program using pointer we use the pointer concept to solve this
Program:
#include <iostream> using namespace std;
class Dog{
public: Dog();
void Print();
int age; int weight;
}; Dog::Dog()
{ age = 0; weight = 0;
} void Dog::Print()
{ cout<<"Dog's age: "<<age<<endl; cout<<"Dog's weight: "<<weight<<endl;
} int main()
{ int ageValue; int weightValue;
cin>>ageValue; cin>>weightValue; // declare Dog pointer with a new Dog Object
Dog*myDog= new Dog(); // now setting age, weight with ageValue & weightValue respectively
myDog->age = ageValue;
myDog->weight = weightValue;
myDog->Print();
return 0;
}
What is a pointer?
A pointer is a type of variable that holds as its value the memory address of another type of variable. The * operator creates a pointer variable, which points to a data type (like an int) of the same type.
Thus using a pointer concept the program gives the estimate output
To know more on pointers follow this link:
https://brainly.com/question/28574563
#SPJ4
The Age and weight values are read from the input using c is
int agevalue;
int weightvalue;
struct Dog {
int age;
int weight;
};
struct Dog* mydog = malloc(sizeof(struct Dog));
mydog -> age = agevalue;
mydog -> weight = weightvalue;
What is input?
Input is the data that is entered into a computer system or other electronic device. It can be in the form of text, images, audio, video, or any other type of digital information. The output of the system is what the user receives as a result of the input.
To learn more about input
https://brainly.com/question/28498043
#SPJ4
Lamaellar eutectic solids form because the geometry limits diffusion distances required for solidification of alpha and beta phases. True False
Fals, Diffusion takes place across small distances due to the urgency of the phase shift, creating a fine lamellar microstructure.
The eutectic structure forms for what reason?A lamellar eutectic structure can only form if the interfacial energy between the two solids (S1/S2; S1 and S2 stand for Solid 1 and Solid 2, respectively) is lower than that of S1/Liquid and S2/Liquid. The diffusional partitioning of components results in the formation of eutectic microstructure.
What features distinguish a eutectic structure?A homogenous, solid mixture of two or more materials that forms a super-lattice is referred to as a eutectic system. The mixture either melts or solidifies at a lower temperature than the melting point of any of the constituent materials. The phrase is most frequently used to describe an alloy composition.
To know more about eutectic visit:-
https://brainly.com/question/27886492
#SPJ4
an ic with a switching rate of and is dissipating . what will be the power dissipation if we change to and the switching rate to while keeping the activity factor the same?
The power dissipated by a specific circuit element is equal to the product of the current and voltage, or P = I V, if a current I passes through that element while a voltage V is lost in the process.
What change to and the switching rate in power dissipation?In other words, the power dissipated across the load will be at its maximum if the value of load resistance is equivalent to the amount of source resistance, or Thevenin's resistance.
Therefore, P = CV2 f, which states that dynamic power dissipation depends squarely on supply voltage and linearly on frequency, results in a cubic reduction in power consumption when both are scaled back.
Learn more about power dissipated here:
https://brainly.com/question/12803712
#SPJ1
Calculate the B/CB/CB/C ratio for the following cash flow estimates at a discount rate of 777% per year.Item Cash FlowFW of benefi ts, $ 30,800,000AW of disbenefi ts, $ per year 105,000First cost, $ 1,200,000M&O costs, $ per year 400,000Life of project, years 20
Per year 400,000Life of project, years 20. The discount rate is the interest charge commercial banks and other financial institutions make to the Federal Reserve Bank in order to borrow short-term money. Thus, option D is correct.
What cash flow estimates at a discount rate?The formula for benefit-cost ratio is: Benefit-Cost Ratio = ∑ Present Value of Future Benefits / ∑ Present Value of Future Costs.
A project determined to have exactly equal benefits and costs B/C ratio equals precisely one). A systematic process for calculating and comparing benefits and costs of a project. Measure calculated by dividing the incremental monetized benefits related to a project by the incremental costs of that project.
Therefore, The present value of future cash flows is computed using a rate of return known as the discount rate in a discounted cash flow analysis. An examination of discounted cash flows shows. Per year 400,000Life of project, years 20
Learn more about cash flow here:
https://brainly.com/question/10776890
#SPJ1
1.) Unevenly torqued lug nuts could result in:
A. vibration while braking.
B. brake squeal.
C. premature brake pad wear.
D. pull to one side when braking.
Unevenly torqued lug nuts could result in premature brake pad wear. The correct option is C.
What are lug nuts?The hardware used to hold your wheel and tire assembly to your vehicle is known as lug nuts. The suitable lug nut guarantees that your wheel is installed safely and securely. They may be little, but they do a lot of work.
With a missing lug nut, you can drive at legal speeds; however, you should visit your nearest tire shop as soon as possible. Wheel nuts gradually loosen, causing wear on the wheel as it vibrates against the thread of the bolt.
Therefore, the correct option is C. premature brake pad wear.
To learn more about lug nuts, refer to the link:
https://brainly.com/question/20516510
#SPJ1
A "calorie" is a unit of energy, defined as the amount of energy needed to raise the temperature of one gram of water by one degree Celsius. The nutritional labels on food products typically tell you how many calories of digestible energy are in one serving of food, where "digestible" means that the energy stored in the chemical bonds of the molecules comprising the food can be extracted by your body. (Water for example has energy, but that energy is not chemically accessible via digestion.) To simplify understanding for typical consumers, the "calories" reported on nutritional labels actually represent kilocalories: a 170 calorie can of beer actually contains 170,000 calories of digestible energy.
i) If a student foolishly decides to binge drink 21 beers on their 21t birthday, how many gallons of water could they have heated from room temperature (24 °C) to boiling (100 C) using an equivalent amount of digestible energy in the beer? Recall that one gallon of water is roughly 8 pounds.
ii) What is this energy equivalent to in BTU? A "BTU" or British Thermal Unit is also a unit of energy, defined as the amount of energy needed to raise the temperature of one pound of water by one degree Fahrenheit
iii) If you had purchased an equivalent amount of electrical energy in kW-hr from the utility company, how much would you have to pay? Is this cheaper than buying beer?
A "calorie" is a unit of energy that is defined as the usually inform you of the number of calories of digestible energy present in one serving of food. 21 beers times 17 calories per beer equals 357 calories.
What is "calorie"?Calories are units of energy that a food or drink provides. You can usually find calorie counts listed on food items, and wearables like the best fitness trackers allow you monitor how many calories you're burning by doing different activities. Certain foods, such as fatty, fried, or processed foods, tend to have more calories. Other foods, such as fresh fruit and vegetables, tend to have fewer calories. However, some healthy fruits and vegetables can be high in calories, while low-calorie foods, such as diet soda, don’t provide any nutritional value. We need calories to give us enough energy to move around, stay warm, grow, work, think, and play. Even our blood circulation and digestion need the energy gained from calories in order to function well.To learn more about blood circulation refer to:
https://brainly.com/question/20393668
#SPJ4
An environmental engineer wants to examine the permeability of different soils to determine the best natural containment system to protect groundwater from pollutants. The engineer tests four different soil samples, places them into a wet column, and pours 50mL of water over each sample. The engineer records the total amount of water that moves through the column as well as the total amount of time for the water to fully percolate through the soil. The data from the study are shown below.
Which of the following best describes why the engineer chose to calculate the permeability of the soil sample in the experimental design in order to evaluate a natural containment system to protect groundwater?
Note that the best option that describes why the engineer chose to calculate the permeability of the soil sample in the experimental design in order to evaluate a natural containment system to protect groundwater is: "Soils that have low permeability would best help protect groundwater because the soil traps pollutants so that chemical and biological breakdown can occur."
What is Soil Permeability?Soil permeability is a measure of how easily water can move through soil. Permeable soil allows water to pass through it easily, while impermeable soil does not allow water to pass through it easily.
Permeable soil is important because it helps to reduce flooding and erosion, and it can help to recharge groundwater. Impermeable soil can lead to problems such as flooding and erosion.
Permeability conveys information on foundation stability, seepage via embankments, and so on. Shear strength is the most essential geotechnical feature of soils, since it aids in the stability of civil engineering projects on or under the earth's surface.
Learn more about Soil Permeability:
https://brainly.com/question/27626099?
#SPJ1
suppose you are given a steel bar and you cut it in fifths. how does the moment of inertia of one of the pieces compare to that of the original bar? assume rotation about a perpendicular axis through one end of the bars.
The moment of inertia of one piece is 125 times smaller than the moment of inertia of original bar.
What is moment of inertia?A body's resistance to having the speed of its rotation about an axis changed by the application of a torque is measured by the term "moment of inertia" in physics (turning force). The axis could be fixed or not fixed, internal or external.
Nevertheless, the moment of inertia (I), which is always specified in relation to that axis, is calculated as the sum of the products obtained by multiplying the mass of each particle of matter in a given body by the square of that particle's distance from the axis.
The moment of inertia can be compared to mass in linear momentum when calculating the angular momentum of a rigid body.
Learn more about moment of inertia
https://brainly.com/question/14460640
A heat pump is used to heat a house and maintain it at 24°C. On a winter day when the outdoor air temperature is –5°C, the house is estimated to lose heat at a rate of 82000 kJ/h. Determine the minimum power required to operate this heat pump. The minimum power required to operate this heat pump is kW.
The minimum power required to operate this heat pump will be 2.17 kW.
What is the efficiency of the heat pump?The efficiency of the heat pump is given as,
η = T₂ / (T₂ - T₁) = Q / W
An intensity siphon is utilized to warm a house and keep up with it at 24°C. On a colder time of year day when the outside air temperature is - 5°C, the house is assessed to lose heat at a pace of 82000 kJ/h.
Then the minimum power is given as,
82,000 / W = (24 + 273) / [(24 + 273) - (- 5 + 273)]
W = 7811.4478 kJ/h
W = 2.17 kW
The minimum power required to operate this heat pump will be 2.17 kW.
More about the efficiency of the heat pump link is given below.
https://brainly.com/question/13016330
#SPJ1
in a tandem drive highway tractor with a 4s/4m abs, which axles are usually monitored and modulated?
In a tandem drive highway tractor with a 4S/4M ABS,which axles are usually monitored and modulated by option B) steer axle and rear drive axle.
What is a tandem tractor?A single axle tractor is more likely to only tow a small or medium-sized load compared to its larger counterparts, whereas most double axle or tandem axle tractors are employed to haul exceptionally heavy loads.
It is sometimes known as a tandem, double-bottom, or double-trailer truck. a very long vehicle made comprised of a tractor towing two trailers connected up in a row. a semitrailer made to attach to another component of such a rig.
Therefore, Anti-lock Brake System includes the ABS sensor, sometimes referred to as a wheel speed sensor. It tracks the wheel speed on your automobile, SUV, or truck and is found in the wheel hub. The passenger-side tail shaft housing contains the sensor.
Learn more about tractor from
https://brainly.com/question/21603150
#SPJ1
See full question below
In a tandem drive highway tractor with a 4S/4M ABS,which axles are usually monitored and modulated?
A) both tandem drive axles
B) steer axle and rear drive axle
C) steer axle and front drive axle
Can someone please help me the answer is supposed to be A but I don’t know why
We can see here that the element in the circuit that is possibly a resistor is Element B.
What is a resistor?A resistor actually known to be a electrical component or device that has two terminals through which current enters and leaves. A resistor is known to limit or regulate the flow of electrical current in an electronic circuit. Resistors are known to be used in order to also provide a kind of specific voltage for a device that is active like a transistor.
Resistors are used in electrical and electronics in order to control the flow of current, reduce current, divide voltages, adjust the level of signals and terminate transmission lines. It is used for other purposes in the electronics field.
We see here that element B selected above is a resistor. The arrow on the head is pointing downward which indicates that current is entering.
Learn more about resistor on https://brainly.com/question/13606415
#SPJ1
The corner store sells candy in ₵20, ₵30 and ₵50 packages. List all the ways in which the Candyman
can spend exactly $3.00 on candy.
Answer: I will list them down below!
Explanation:
He can buy 6, 50 cent candies.
He can buy 30, 20 cent candies.
He can buy 6, 30 cent candies and 6, 20 cent candies.
He can buy 15, 20 cent candies and 3, 50 cent candies.
He can by 3, 20 and 30 cent candies and 3, 50 cent candies.
That's it.
Hope this helps!
4. identify the c-h out-of-plane bending vibrations in the infrared spectrum of 4- methylcyclo- hexene. what structural information can be obtained from these bands?
650 to 1000 cm-1 of out-of-plane C-H bending vibrations.
The C-H stretch is where?Depending on the hydrization, the C-H stretching modes range between 2850 and 3300 cm-1. The peaks from 3000-3100 cm-1 denote an unsaturated system, while the range from 2850-3000 cm-1 refers to saturated systems (alkanes, sp3, for example 1). (alkenes, sp2, example 2; aromatic ring, example 3,4).
What does cyclohexane's IR spectrum look like?In the range of 4000-150 cm-1, the infrared spectra of cyclohexane in both its liquid and vapour phases have been investigated. The Eu skeletal deformation vibration's infrared band was discovered at 248 cm1.
To know more about vibrations visit:-
https://brainly.com/question/20999521
#SPJ4
The circuit below is known as a source-follower configuration. It achieves a DC level shift between the input and output. The value of this shift is determined by the current lo. Assumey- 0.4, 2ion-0.6 V, To-0.43 V, k-1 15 pA/V2, and -0. The NMOS device has W/L 5.4/1.2u such that the short channel effects are not observed. a. Derive an expression giving Vi as a function of Vo and Vro. If we neglect body effect, what is the nominal value of the level shift performed by this circuit? The NMOS transistor experiences a shift in Vr due to the body effect. Find Vr as a function of Vo for Vo ranging from 0 to 1.5V with 0.25 V intervals. Plot a curve for VT vs. Vo roughly. b. DD 2.5 V 54112μ 10-35 μΑ
The nominal value of the level shift performed by this circuit is V[tex]_T[/tex] + 0.367 v, where given V[tex]_T[/tex] = 0.43.
The shift in voltage is, ΔV = 0.43 + 0.367 = 0.797.
What is voltage?Voltage is the pressure from the power source of an electrical circuit that pushes charged electrons (current) through a conducting loop, allowing them to perform tasks like lighting a lamp.
In a nutshell, voltage equals pressure and is measured in volts (V). The term honours Italian physicist Alessandro Volta (1745–1827), who developed the voltaic pile, the forerunner of the modern household battery.
Voltage was first referred to as electromotive force in the early history of electricity (emf). For this reason, voltage is denoted by the letter E in equations like Ohm's Law.
Learn more about Voltage
https://brainly.com/question/1176850
#SPJ4
What does General Zaroff say that shows he thinks Rainsford is similar to him?
“I’ll tell you”
“You will be amused”
“I have done a rare thing”
“in all modesty”
Answer:
Explanation:
The phrase:
“You will be amused”
He is assuming that Rainsford will enjoy what he is about to show him because he himself enjoys it.
How would you describe good communication? Why and when do we need it?
The primary of an ideal transformer with a turns ratio n of 5 is connected to a voltage source with Thevenin parameters vTh = 10 cos2000t V and RTh = 100 Ω. Determine the average power P delivered to a 520 Ω load connected across the secondary winding.The average power P = ?? mW
According to Thevenin's Theorem, we get The average power P we get 2000 cos² 2000t
What is Thevenin’s theorem?According to Thevenin's Theorem, a voltage source connected in series with a resistor can be used to represent any two terminal linear network or circuit. Thevenin's equivalent circuit is what it is called. Independent sources, dependent sources, and resistors are all possible components in a linear circuit.Thevenin's theorem is helpful for studying electrical power systems and other circuits that have a variable resistor, or "load" resistance. With each trial value of load resistance, the circuit must be recalculated in order to ascertain the voltage across and current flowing through it.given :
a turns ratio n = 5
Thevenin parameters vTh = 10 cos2000t
RTh = 100 Ω.
resistance in secondary winding = 540 Ω.
P = V ² R.
= (10 cos2000t )² .100
= 10000 cos² 2000t
secondary coil ratio 5
p= 2000 cos² 2000t
To learn more about Thevenin's Theorem refer,
https://brainly.com/question/29801802
#SPJ4