Answer:
b i think
Explanation:
One evening, a student tells her sister that the Sun only appears brighter than other stars because the Sun and stars are different distances from Earth. Her sister disagrees, so the student supports her argument by asking her sister to observe the brightness of streetlights throughout their neighborhood. Which observation would support the student’s argument?
Comparing and analyzing the brightness of near and farther streetlight would support the student’s argument.
Which observation would support the student’s argument?The brightness of nearer streetlight is more as compared to the brightness of the farther light because brightness decreases with the increase in distance.
So we can conclude that comparing and analyzing the brightness of near and farther streetlight would support the student’s argument.
Learn more about sun here: https://brainly.com/question/15837114
#SPJ1
1. Use the picture on page 3 of the lesson in Connexus to help you label each part of the wave below:
a.
b.
c.
d.
An 95 Watt TV is plugged into a 115 volt circuit.
The TV operates for 120 minutes. If the cost of energy is
8¢ per kW-hr, how much does it cost to run the TV
for 120 minutes?
120 min = 2 hours
95 x 2 : 1000 =0.19 kwh
8¢ x 0.19 kwh = 1.52¢
The cost of running the 95 W TV for 120 minutes if charged at 8 ¢ per kWhr is 1.52 ¢
How to determine the energyPower ( P) = 95 W = 95 / 1000 = 0.095 KWTime (t) = 120 mins = 120 / 60 = 2 hrEnergy (E) =?E = Pt
E = 0.095 × 2
E = 0.19 KWhr
How to determine the cost of operationEnergy (E) = 0.19 KWhrCost per KWhr = 8 ¢ Cost =?Cost = Energy × Cost per KWhr
Cost = 0.19 × 8
Cost = 1.52 ¢
Learn more about buying electrical energy:
https://brainly.com/question/13269561
#SPJ2
The diagram shows different body planes.
X: frontal; Y: sagittal; Z: transverse
X: sagittal; Y: frontal; Z: transverse
X: transverse; Y: sagittal; Z: frontal
X: frontal; Y: transverse; Z: sagittal
The diagram shows different body planes. X shows sagittal,Y shows frontal and Z shows transverse axis. Option B is correct.
What is frame of reference?A frame of reference is a mathematical and physical coordinate system whose origin, direction, and scale are given by a collection of reference points.
1. Frontal Plane divides the body into front and posterior sections.
2. The Sagittal Plane divides the body into left and right halves.
3. The transverse plane divides the body into superior and inferior halves.
The diagram shows different body planes. X shows sagittal,Y shows frontal and Z shows transverse axis.
Hence,option B is correct.
To learn more about the frame of reference refer to the link;
https://brainly.com/question/12222532
#SPJ1
calculate the depth of water of density 1020 kg/m³ where the pressure is 3.0 x 10⁶ Pa
Answer:
Here is your answer
Explanation:
Given:
Given:Density of sea water (d) = 1020 kgm^{3}3
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:In order to find depth of sea water first we need to find pressure of sea water.
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:In order to find depth of sea water first we need to find pressure of sea water.Pressure of sea water (P)
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:In order to find depth of sea water first we need to find pressure of sea water.Pressure of sea water (P)= 1.02 × 10^{7}7
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:In order to find depth of sea water first we need to find pressure of sea water.Pressure of sea water (P)= 1.02 × 10^{7}7= 102,00,000 Nm^{–2}–2
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:In order to find depth of sea water first we need to find pressure of sea water.Pressure of sea water (P)= 1.02 × 10^{7}7= 102,00,000 Nm^{–2}–2We know that,
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:In order to find depth of sea water first we need to find pressure of sea water.Pressure of sea water (P)= 1.02 × 10^{7}7= 102,00,000 Nm^{–2}–2We know that,P = h × d × g
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:In order to find depth of sea water first we need to find pressure of sea water.Pressure of sea water (P)= 1.02 × 10^{7}7= 102,00,000 Nm^{–2}–2We know that,P = h × d × g\therefore∴ h = P/dg
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:In order to find depth of sea water first we need to find pressure of sea water.Pressure of sea water (P)= 1.02 × 10^{7}7= 102,00,000 Nm^{–2}–2We know that,P = h × d × g\therefore∴ h = P/dg\begin{gathered} = \frac{10200000}{1020 \times 10} \\ \\ = 1000 \: m \\ \\ = 1 \: km.\end{gathered}=1020×1010200000=1000m=1km.
Given:Density of sea water (d) = 1020 kgm^{3}3Acceleration due to gravity (g) = 10 ms^{–2}–2To find:Depth of sea.Solution:In order to find depth of sea water first we need to find pressure of sea water.Pressure of sea water (P)= 1.02 × 10^{7}7= 102,00,000 Nm^{–2}–2We know that,P = h × d × g\therefore∴ h = P/dg\begin{gathered} = \frac{10200000}{1020 \times 10} \\ \\ = 1000 \: m \\ \\ = 1 \: km.\end{gathered}=1020×1010200000=1000m=1km.Hence, depth of sea is 1 km
Why do you think there are so many more autotrophs than consumers on Earth?
Helppp
There are many Autotrophs than consumers because : Autotrophs are the bases of any food chain/web
Function of AutotrophsAutotrophs capture the energy required for every food chain or web from which sustains other organisms in the food chain form sunlight and chemicals. Also there is always more biomass present in the lower levels of the trophic system as biomass decreases as we move up the food chain.
Since autotrophs are producers, for a healthy food chain there would be more autotrophs than consumers.
Hence we can conclude that There are many Autotrophs than consumers because : Autotrophs are the bases of any food chain/web
Learn more about Autotrophs : https://brainly.com/question/10253663
#SPJ1
I need help with this ASAP!!
Answer:
C
Explanation:
High pitch due to high frequency b/c of doppler effect. The sound waves in front of the vehicle are being squashed together by the moving ambulance. This causes more vibrations to reach your ear per second.
3. Classify the different types of spectra by how they are created. Physical science
Answer:
Most light sources can be classified into three main types: continuous, absorption, and emission. A hot, opaque object, like the filament in an incandescent light bulb, emits a continuous spectrum, having light of all wavelengths. A hot, dense gas is another example of an object that emits a continuous spectrum.
Explanation:
Please help me guys please help please
Answer:
C = frequency × wavelength, where C is the speed of the photons which is the speed of light ~3×10^8
frequency = C/wavelength
f = 3×10^8/400×10^-9m
f = 3/4 × 10^15Hz
f = 0.75×10^15Hz
f = 7.5×10^14Hz
What is one way that light waves differ from sound waves?(1 point)
A car moving with a velocity of 30 ms-1 is stopped by the application of brakes which imparts a radiation of 6 ms-2 to the car.
1. how long does it take for the car to come to stop
2. how far does the car travel during the time the brakes are applied
somebody please help me solve this and do explain..
[tex]\huge{\color{red}{\fbox{\textsf{\textbf{Answer}}}}} [/tex]
1) 5 seconds
2) 75 meters
Explanation:
Refer to the attachment
1. The distance between a trough and a crest on a transverse wave is 12.0cm. If cycles of the wave pass a fixed point in one second, calculate the speed of the wave.
Answer:
0.12m/s
Explanation:
v=λf
Given that, λ = 12cm = 0.12m
T = 1second
(A period T is the time required for one complete cycle of vibration to pass a given point)
frequency 'f' is unknown but we can get frequency from f = 1/T = 1/1 = 1Hz
therefore, v= 0.12 × 1 = 0.12m/s
Which pair of atoms will form a covalent bond? a. One atom of Fluorine and two atoms of Oxygen
b. two atoms of lithium and one atom of chlorine
c. one atom of magnesium and two atoms of sulfur
d. three atoms of potassium and one atom of phosphorus
Answer:
a.one atom of fluorine and two atoms of oxygen
Explanation:
hope it help
Please answer these! Will mark brainiest if correct!
Answer:
11 is d. 12 is c. 13 is b. 14 is b. 15 is b.
Explanation:
Work is done when:______.a. you apply a force to an object and the object moves in any direction. b. you apply a force to an object and it moves in the same direction.c. you apply a force to an object and it moves in the opposite direction. d. You apply a force to an object and it doesn't move.
Answer:
b
Explanation:
The formula for work done (W) is:
W = Force x Distance moved in the direction of force
This means that the object needs to move in the direction of the force, otherwise no work is done in that direction.
Hope this helps!
what temperature change is required to change the length of a 5.5-m steel beam by 0.0012m?
Answer:
Length of steel = 5.5 m
Increase in length = 0.0012 m
α of steel = 12 x 10-6/K
To find:
Temperature change needed ?
Calculation:
Let the required temperature change be ∆T. (in the photo)
So, temperature change of 18.1 Kelvin is required
I hope I have helped you and go to my profile to help me with my question, I really need It, thanks.
A company is creating an advertisement for colored contact lenses. In the ad, the company wants to include the
phrase "Each contact lens is like a second
Which part of the eye would be most accurate in completing the phrase?
retina
sclera
iris
pupil
Answer:
option C) the iris
Explanation:
2023
lookup the composition for air. what is the percentage of nitrogen and oxygen present in the air we breathe
78 percent nitrogen and 21 percent oxygen
QUESTION 1
1.1 Define the term acceleration in words
Answer:
To be better at something
Explanation:
I have Accelerated at cooking
Answer:
Acceleration means to speed up
Explanation:
how can we change the frequency of the wave
Answer:
.Also we can change the frequency by decreasing wavelength , or increasing velocity
Explanation:
if it takes you 10 n of force to push your bike 30 m how much work did you do>
Answer:
300 J
Explanation:
GIVEN:
Force (F) = 10 N
Displacement (s) = 30 m
or displacement (d) = 30m
Work done (W) = ?
Therefore,
W = F×s
or W= F × d
= 10×30
= 300 J
Hope it helps
Two rocks, a and b, are thrown horizontally from the top of a cliff. rock a has an initial speed of 10 meters per second and rock b has an initial speed of 20 meters per second. how would you describe the time it takes for the rocks to reach the ground and the horizontal distance they travel? both rocks hit the ground at the same time and at the same distance from the base of the cliff. both rocks hit the ground at the same time, but rock b lands twice as far as rock a from the base of the cliff. both rocks hit the ground at the same time, but rock a lands twice as far as rock b from the base of the cliff. rock b hits the ground before rock a, and rock b lands twice as far as rock a from the base of the cliff.
Both rocks hit the ground at the same time and at the same distance from the base of the cliff. Option A is correct.
What is speed ?Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while u for the final speed. its SI unit is m/sec.
If the resistance is ignored, things falling near the Earth's surface have the same estimated acceleration due to gravity of 9.8 meters per second.
As a result, the objects' acceleration is the same, and their velocity is growing at a consistent pace.
So that both rocks hit the ground at the same time and at the same distance from the base of the cliff.
Hence, option A is correct.
To learn more about the sped, refer to the link;
https://brainly.com/question/7359669
#SPJ1
A motorcycle starts 20m west of a reference point. It moves at a constant velocity for 5s, reaching a position of 10m east of the reference point.
What is the motorcycle’s average velocity?
The motorcycle's average velocity will be 6 m/sec. The ratio of the overall distance traveled to the total time taken by the body is the average velocity.
What is average velocity?The average velocity is the ratio of the total distance traveled to the total time taken by the body. Its unit is m/sec.
Total distance travelled by the motorcycle;
d=20 m+10 m
d=30 m
The average velocity is found as;
[tex]\rm v_{avg}=\frac{d}{t} \\\\ \rm v_{avg}=\frac{30}{5} \\\\ v_{avg}= 6 \ m /sec[/tex]
Hence,the motorcycle’s average velocity will be 6 m/sec.
To learn more about the average velocity refer to the link;
https://brainly.com/question/862972
#SPJ1
A Ball A and a Ball B collide elastically. The initial momentum of Ball A is 14.0kgm/s and the initial momentum of Ball B is -9.00kgm/s. Ball A has a mass of 2.00kg and is traveling at -5.00 m/s after the collision. What is the velocity of ball B if it has a mass of 3.00kg
The total momentum before collision is
14.0 kg•m/s + (-9.00 kg•m/s) = 5.00 kg•m/s
If v is the velocity of ball B after colliding with ball A, the total momentum after collision is
(2.00 kg) (-5.00 m/s) + (3.00 kg) v
Momentum is conserved, so these quantities are equal. Solve for v :
5.00 kg•m/s = (2.00 kg) (-5.0 m/s) + (3.00 kg) v
5.00 kg•m/s = -10.0 kg•m/s + (3.00 kg) v
15.0 kg•m/s = (3.00 kg) v
v = (15.0 kg•m/s) / (3.00 kg) = 5.00 m/s
7,293 ÷ 8 what is this
Answer: 911.625
Explanation:
Answer:
911.625 is the answer of your question
Ronnie kicks a playground ball with an initial velocity of 16 m/s at an angle of 40° relative to the ground. what is the approximate horizontal component of the initial velocity? 0.64 m/s 0.77 m/s 10.3 m/s 12.3 m/s
The horizontal component of the velocity with which Ronnie kicks a playground ball is 12.3 m/s.
Horizontal component of the velocity
The horizontal component of the velocity with which Ronnie kicks a playground ball is calculated as follows;
Vx = Vcosθ
where;
V is the initial velocityθ is the angle of projectionVx = 16 x cos(40)
Vx = 12.3 m/s
Thus, the horizontal component of the velocity with which Ronnie kicks a playground ball is 12.3 m/s.
Learn more about horizontal velocity here: https://brainly.com/question/24949996
#SPJ4
Answer:
D) 12.3
Explanation:
took the test
Write down at least 3 equations as you solve them
Answer:
3+7= 7x3= 21➗7=
Explanation:
3+7= 10 7 8 9 10
7x3= 21 7 14 21
21➗7=3 21 14 7
mark me brainliest please
How far did an object travel if they rode a bike at 15m/s for 5 seconds?
A. 75m
B. 3 m/s
C.20 m
Answer:
A) 75m
Explanation:
distance = speed x time taken
Here given:
speed: 15 m/s
time: 5 second
So, distance covered:
15 x 5
75 m
Distance
Speed×Time15(5)75mHelp me pleaseee
a battery-operated toy draws 0.2 a of current from a battery pack. if the total resistance
of the boy is 362, what is the voltage of the battery pack?
Amber likes riding her bicycle through her neighborhood where there are lots of hills. she rides down a very steep hill, and then goes up a small hill. she doesn't need to pedal as her bicycle carries her up the small hill. how do amber's kinetic energy and potential energy change as she goes uphill
Answer:
Her kinetic energy decreases and her potential energy increases.
Explanation: