We are examining a new project. We expect to sell 6,600 units per year at $60 net cash flow apiece for the next 10 years. In other words, the annual operating cash flow is projected to be $60×6,600=$396,000. The relevant discount rate is 14 percent and the initial investment required is $1,770,000. a. What is the base-case NPV? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) b. After the first year, the project can be dismantled and sold for $1,640,000. If expected sales are revised based on the first year's performance, below what level of expected sales would it make sense to abandon the project? (Do not round intermediate calculations and round your answer to the nearest whole number, e.g., 32.) We are examining a new project. We expect to sell 6,900 units per year at $63 net cash flow apiece for the next 10 years. In other words, the annual operating cash flow is projected to be $63×6,900=$434,700. The relevant discount rate is 16 percent, and the initial investment required is $1,800,000. After the first year, the project can be dismantled and sold for $1,670,000. Suppose you think it is likely that expected sales will be revised upward to 9,900 units if the first year is a success and revised downward to 5,500 units if the first year is not a success. a. If success and failure are equally likely, what is the NPV of the project? Consider the possibility of abandonment in answering. (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) b. What is the value of the option to abandon? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)

To compute the cross-price elasticity of demand using the midpoint method, we need the initial and final prices and quantities for both hamburgers and tacos.

The given data is as follows:

Initial price of hamburgers: $4

Final price of hamburgers: $6

Initial quantity of tacos: 2250

Final quantity of tacos: 2750

We can use the following formula to calculate the cross-price elasticity of demand:

Cross-Price Elasticity of Demand = [(Q2 - Q1) / ((Q2 + Q1) / 2)] / [(P2 - P1) / ((P2 + P1) / 2)]

Substituting the given values into the formula:

Change in quantity of tacos (Q2 - Q1) = 2750 - 2250 = 500

Average quantity of tacos = [tex]\frac{(Q2 + Q1)}{2}[/tex] = [tex]\frac{2750 + 2250}{2}[/tex] = 2500

Change in price of hamburgers (P2 - P1) = $6 - $4 = $2

Average price of hamburgers [tex]\frac{(P2 + P1)}{2}[/tex] = [tex]\frac{(6 + 4)}{2}[/tex] = $5

Cross-Price Elasticity of Demand = [tex]\frac{500/2500}{2/5}[/tex] = [tex]\frac{0.2}{0.4}[/tex] = 0.5

Therefore, the cross-price elasticity of demand between hamburgers and tacos is 0.5.

Learn more about cross-price elasticity in:

https://brainly.com/question/30402460

#SPJ4

The firm's break-even point in units of Regular and Ultra is 34,000 Regular units and 68,000 Ultra units. For calculating the break-even point, we need to calculate the contribution margin per unit of both products. The option (B) is correct.

Let’s assume that the number of Regular units sold is x, then the number of Ultra units sold will be 2x. Hence the total revenue of the firm will be;

Revenue = (Number of Regular units sold × Sales price of Regular units) + (Number of Ultra units sold × Sales price of Ultra units)

Revenue = (x × 26) + (2x × 29)Revenue = $84xThen, the total variable costs of the firm will be; Variable Cost = (Number of Regular units sold × Variable cost per unit of Regular units) + (Number of Ultra units sold × Variable cost per unit of Ultra units)Variable Cost = (x × 9) + (2x × 5)Variable Cost = $19x

Now, the contribution margin for the firm is; Contribution Margin = Revenue - Variable Cost$84x - $19x = $65xThe total fixed costs of the firm are $2,210,000Hence, the equation of break-even point will be; Contribution Margin = Fixed Costs$65x = $2,210,000x = $2,210,000/$65x = 34,000

Therefore, the number of Regular units sold will be x = 34,000And the number of Ultra units sold will be 2x = 68,000.Therefore, the firm's break-even point in units of Regular and Ultra is 34,000 Regular units and 68,000 Ultra units.

Hence, The option (B) is correct.

Learn more about the break-even point:

https://brainly.com/question/17275598

#SPJ11

This question is not complete, Here I am attaching the complete question:

The firm sells two products, Regular and Ultra. For every unit of Regular sold, two units of Ultra are sold. The firm's total fixed costs are $2,210,000. Selling prices and cost information for both products follow. What is the firm's break-even point in units of Regular and Ultra? 00:59:22 Ask Product Regular Ultra Multiple Choice Unit Sales Price $ 26 29 Variable Cost Per Unit $ 9 5

(A) 34,000 Regular units and 34,000 Ultra units.

(B) 34,000 Regular units and 68,000 Ultra units.

(C) 11,333 Regular units and 22,667 Ultra units.

(D) 39,667 Regular units and 79,333 Ultra units.

(E) 68,000 Regular units and 34,000 Ultra units.

the inverse matrix does not provide unique solutions for pA, pB, and pc. Instead, it represents a linear dependence between the variables, indicating multiple possible equilibrium solutions for the system. Excess Demand, ED(C) = QD,C - QS,C = (1 + 3pA + pB - pc) - (2 - 2pB + pc) = -1 + 3pA + 3pB - 2pc. The system derived is homogeneous because all the variables (pA, pB, pc) have zero coefficients in the constant terms. pc = Dz / D = 0 / -6 = 0. Since the excess demand for each market is not equal to zero, it indicates that the prices found in part c do not clear the markets.

a. Excess Demand Functions:

For market A:

Excess Demand, ED(A) = QD,A - QS,A = (6 - 2pA + 3pB - 2pc) - (7 + pA - pc) = -1 - 3pA + 3pB + pc

For market B:

Excess Demand, ED(B) = QD,B - QS,B = (4 + 2pA - 3pB + 3pc) - (3 + pA + 3pB) = 1 + pA - 6pB + 3pc

For market C:

Excess Demand, ED(C) = QD,C - QS,C = (1 + 3pA + pB - pc) - (2 - 2pB + pc) = -1 + 3pA + 3pB - 2pc

b. Linear System of Equations:

To specify a linear system of equations, we equate the excess demand functions to zero (since markets clear at equilibrium):

-1 - 3pA + 3pB + pc = 0 ...(1)

1 + pA - 6pB + 3pc = 0 ...(2)

-1 + 3pA + 3pB - 2pc = 0 ...(3)

The system derived is homogeneous because all the variables (pA, pB, pc) have zero coefficients in the constant terms.

c. Using Cramer's Rule to Find Equilibrium Prices:

We can solve the system of equations using Cramer's rule, which involves calculating determinants.

Let D be the determinant of the coefficient matrix:

D = [tex]\left[\begin{array}{ccc}-3&3&1\\1&-6&3\\3&3&-2\end{array}\right][/tex]

D = (-3)(-6)(-2) + (3)(3)(3) + (1)(1)(3) - (1)(-6)(3) - (-3)(3)(-2) - (3)(1)(3) = -81 + 27 + 3 + 18 + 18 + 9 = -6

Let Dx, Dy, and Dz be the determinants of the matrices obtained by replacing the respective column of D with the constant terms.

Dx =[tex]\left[\begin{array}{ccc}0&3&1\\0&-6&3\\0&3&-2\end{array}\right][/tex]

Dx = (0)(-6)(-2) + (3)(3)(3) + (1)(0)(3) - (0)(3)(3) - (-6)(3)(-2) - (3)(0)(3) = 0 + 27 + 0 - 0 + 36 + 0 = 63

Dy = -3 0 1

         1 0 3

        3 0 -2

Dy = (-3)(0)(-2) + (0)(3)(3) + (1)(0)(3) - (1)(0)(-2) - (-3)(0)(3) - (3)(0)(3) = 0 + 0 + 0 - 0 + 0 + 0 = 0

Dz =  -3 3 0

        1 -6 0

        3 3 0

Dz = (-3)(-6)(0) + (3)(3)(0) + (0)(1)(0) - (0)(-6)(0) - (-3)(3)(0) - (3)(0)(0) = 0 + 0 + 0 - 0 + 0 + 0 = 0

Using Cramer's rule, we can find the equilibrium prices:

pA = Dx / D = 63 / -6 = -10.5

pB = Dy / D = 0 / -6 = 0

pc = Dz / D = 0 / -6 = 0

d. Verification of Market Clearance:

To verify if the prices found in part c clear the markets, we substitute the values into the excess demand functions.

For market A: ED(A) = -1 - 3(-10.5) + 3(0) + 0 = -1 + 31.5 + 0 = 30.5

For market B: ED(B) = 1 + (-10.5) - 6(0) + 3(0) = 1 - 10.5 + 0 = -9.5

For market C: ED(C) = -1 + 3(-10.5) + 3(0) - 2(0) = -1 - 31.5 + 0 = -32.5

Since the excess demand for each market is not equal to zero, it indicates that the prices found in part c do not clear the markets.

e. Solving the System Using Matrix Inversion:

To solve the system using matrix inversion, we need to derive the cofactor matrix.

The coefficient matrix:

-3 3 1

1 -6 3

3 3 -2

The cofactor matrix is obtained by taking the determinants of the 2×2 matrices formed by removing each element of the coefficient matrix.

Cofactor matrix:

12 9 9

18 6 -3

-9 -9 -9

To find the inverse of the coefficient matrix, we divide the cofactor matrix by the determinant (-6).

Inverse matrix:

-2 -1.5 -1.5

-3   -1    0.5

1.5 1.5 1.5

Using the inverse matrix, we can find the equilibrium prices:

-2 -1.5 -1.5  0pA

-3 -1 0.5 × 0 = pB

1.5 1.5 1.5  0 pc

This system of equations simplifies to:

-2pA - 1.5pB - 1.5pc = 0

-3pA - pB + 0.5pc = 0

1.5pA + 1.5pB + 1.5pc = 0

By comparing the coefficients, we can see that the system derived is homogeneous.

We can observe that the inverse matrix does not provide unique solutions for pA, pB, and pc. Instead, it represents a linear dependence between the variables, indicating multiple possible equilibrium price solutions for the system.

To know more about equilibrium price:

https://brainly.com/question/32570033

#SPJ4

The excess demand function for each market can be obtained by subtracting the quantity supplied (QS) from the quantity demanded (QD).The market-clearing condition states that the excess demand in each market should be equal to zero for equilibrium and to solve the system of equations using Cramer's rule, we need to find the determinant of the coefficient matrix and the determinants of the matrice and to verify that the prices found in part c clear the markets, we substitute the equilibrium prices into the excess demand functions

a. The excess demand function for each market can be obtained by subtracting the quantity supplied (QS) from the quantity demanded (QD):

Excess demand function for market A:

ED_A = QD,A - QS,A

= (6 - 2pA + 3pB - 2pc) - (7 + pA - pc)

= -1 - pA + 3pB - pc

Excess demand function for market B:

ED_B = QD,B - QS,B

= (4 + 2pA - 3pB + 3pc) - (3 + pA + 3pB)

= 1 + pA - 6pB + 3pc

Excess demand function for market C:

ED_C = QD,C - QS,C

= (1 + 3pA + pB - pc) - (2 - 2pB + pc)

= -1 + 3pA + 3pB - 2pc

b. The market-clearing condition states that the excess demand in each market should be equal to zero for equilibrium. Using this condition, we can set up a linear system of equations:

ED_A = -1 - pA + 3pB - pc = 0

ED_B = 1 + pA - 6pB + 3pc = 0

ED_C = -1 + 3pA + 3pB - 2pc = 0

This system of equations is not homogeneous because the constant terms (-1, 1, -1) are non-zero.

c. To solve the system of equations using Cramer's rule, we need to find the determinant of the coefficient matrix and the determinants of the matrices obtained by replacing each column of the coefficient matrix with the constant terms.

Coefficient matrix:

| -1 3 -1 |

| 1 -6 3 |

| 3 3 -2 |

Determinant of the coefficient matrix (D):

D = |-1 3 -1 |

| 1 -6 3 |

| 3 3 -2 |

= -1(3(-2) - 3(3)) - 3(1(-2) - 3(3)) + (-1)(1(3) - 3(3))

= -6 - 3(-9) + 6

= -6 + 27 + 6

= 27

Replacing the first column with the constant terms:

D_A = | 0 3 -1 |

| 0 -6 3 |

| 0 3 -2 |

= 0

Replacing the second column with the constant terms:

D_B = |-1 0 -1 |

| 1 0 3 |

| 3 0 -2 |

= -1(0(-2) - 3(0)) - 0(1(-2) - 3(3)) + (-1)(1(0) - 3(3))

= 0

Replacing the third column with the constant terms:

D_C = |-1 3 0 |

| 1 -6 0 |

| 3 3 0 |

= 0

Now, we can find the equilibrium prices using Cramer's rule:

pA = D_A / D = 0 / 27 = 0

pB = D_B / D = 0 / 27 = 0

pC = D_C / D = 0 / 27 = 0

d. To verify that the prices found in part c clear the markets, we substitute the equilibrium prices into the excess demand functions and check if they equal zero:

ED_A = -1 - (0) + 3(0) - (0) = -1 ≠ 0

ED_B = 1 + (0) - 6(0) + 3(0) = 1 ≠ 0

ED_C = -1 + 3(0) + 3(0) - 2(0) = -1 ≠ 0

Since the excess demand is not zero for each market, the prices found in part c do not clear the markets.

e. To solve the system of equations using matrix inversion, we need to calculate the inverse of the coefficient matrix.

Coefficient matrix:

| -1 3 -1 |

| 1 -6 3 |

| 3 3 -2 |

Cofactor matrix:

| -18 -9 -18 |

| -3 -6 -3 |

| -9 -18 -18 |

Adjugate matrix (transpose of the cofactor matrix):

| -18 -3 -9 |

| -9 -6 -18 |

| -18 -3 -18 |

Determinant of the coefficient matrix (D) = 27 (as calculated in part c).

Inverse of the coefficient matrix (A^(-1)):

A^(-1) = (1/D) * adjugate matrix

= (1/27) * | -18 -3 -9 |

| -9 -6 -18 |

| -18 -3 -18 |

Therefore, the inverse of the coefficient matrix is:

| -2/9 -1/27 -1/3 |

| -1/3 -2/9 -2/3 |

| -2/3 -1/27 -2/3 |

To solve for the equilibrium prices, we multiply the inverse of the coefficient matrix by the constant terms' matrix:

| -2/9 -1/27 -1/3 | | 0 |

| -1/3 -2/9 -2/3 | * | 0 |

| -2/3 -1/27 -2/3 | | 0 |

The solution is:

pA = 0

pB = 0

pC = 0

However, as we observed in part d, these prices do not clear the markets.

Learn more about excess demand function from the given link!

brainly.com/question/28275792

#SJP11

Friedman's assessment that the world is flat can be seen from different perspectives, and my stance leans towards a partial agreement with his viewpoint.

In a flat world, a student performing a job search may encounter both benefits and challenges. On the positive side, the availability of information and networking platforms can broaden their reach, allowing them to explore job opportunities across borders.

While Friedman's list of flatteners provides a comprehensive framework, there are ongoing developments that contribute to the world's flatness. One such flattener is the rise of blockchain technology.

Blockchain has the potential to revolutionize various industries by providing secure and transparent transactions without the need for intermediaries.

Its decentralized nature allows for global collaborations and removes geographical barriers in financial systems, supply chains, and even identity verification. The impact of blockchain on global business and trade is still unfolding, but its potential to reshape the world's economic landscape cannot be ignored, making it a noteworthy addition to the list of flatteners.

To learn more about blockchain, visit here

https://brainly.com/question/30793651

#SPJ11

The technique that aims at guiding the actual towards the line of the target is known as cost control. Here option C is the correct answer.

Cost control involves implementing measures and strategies to manage and regulate costs within an organization. It focuses on ensuring that actual costs align with the predetermined targets or budgets.

Cost control involves several activities, such as setting cost targets, monitoring actual costs, analyzing variances between actual and target costs, identifying cost-saving opportunities, implementing cost reduction measures, and continuously evaluating and adjusting cost control strategies.

By exercising cost control, organizations can effectively manage their expenses, improve operational efficiency, maximize profitability, and maintain financial stability. It helps in identifying areas where costs can be minimized or eliminated, optimizing resource allocation, and ensuring that resources are utilized efficiently.

Cost control is an essential aspect of financial management and is applicable to various areas within an organization, including production, procurement, inventory management, marketing, and overall business operations.

It requires coordination and collaboration among different departments and stakeholders to achieve the desired cost objectives. Therefore option C is the correct answer.

To learn more about cost control

https://brainly.com/question/28147009

#SPJ11

Complete question:

Not yet answered Marked out of 1.00 Flag question Bank deposits are examples of monetary assets in foreign exchange translations. Select one: O True False Question 14 Not yet answered Marked out of 1.00 Flag question Assurance services are not independent professional services usually provided by chartered accountants. Select one: O True O False Question 23 Not yet answered Marked out of 1.00 Flag question Which of the following is not an example of monetary assets in foreign exchange translation ? a. O b. d. Trade receivables Intangible assets None of the above Fixed assets The cost of raw materials plus direct labor is known as: a. O b. C. d. Prime cost Conversion cost Period cost Product cost Question 24 Not yet answered Marked out of 1.00 Flag question The technique that aims at guiding the actual towards the line of target is known as:

A - Cost determination

B - Cost ascertainment

C - Cost control

D - None of the above

The price control policy effect in the Netherlands include:

The implementation of price control policies has a positive impact on consumer surplus as it enhances its magnitude. When price controls are enforced, setting the price below the equilibrium level determined by the market, consumer surplus experiences an augmentation. This occurs as consumers are enabled to procure the desired goods at a reduced price compared to what they would have paid under normal circumstances.

The implementation of price control policies exerts a negative influence on producer surplus as it diminishes its extent. When price controls are imposed, setting the price below the market equilibrium price, producer surplus experiences a decline. This occurs as producers are compelled to sell the goods at a lower price compared to what they would have received under normal market conditions.

The price control policy has an impact on the efficiency and consumption of oil and gas in the Netherlands, resulting in a reduction in both aspects. This is attributed to the price control policy creating a scarcity of oil and gas, leading to escalated prices and decreased consumption.

Learn about producer surplus here https://brainly.com/question/17267471

#SPJ4

The price control policy effect in the Netherlands include: Reduced supply, Increased demand, Inefficiency

The implementation of price control policies has a positive impact on consumer surplus as it enhances its magnitude. When price controls are enforced, setting the price below the equilibrium level determined by the market, consumer surplus experiences an augmentation. This occurs as consumers are enabled to procure the desired goods at a reduced price compared to what they would have paid under normal circumstances.

The implementation of price control policies exerts a negative influence on producer surplus as it diminishes its extent. When price controls are imposed, setting the price below the market equilibrium price, producer surplus experiences a decline. This occurs as producers are compelled to sell the goods at a lower price compared to what they would have received under normal market conditions.

The price control policy has an impact on the efficiency and consumption of oil and gas in the Netherlands, resulting in a reduction in both aspects. This is attributed to the price control policy creating a scarcity of oil and gas, leading to escalated prices and decreased consumption.

Learn about producer surplus from the given link:

brainly.com/question/17267471

#SPJ11

Governments correct negative externalities by taking actions to address harmful impacts or costs imposed on third parties.

Examples of negative externalities include pollution, congestion, and noise.

Markets tend to over-produce goods with negative externalities because the external costs are not accounted for in market prices.

Voting can lead to dissatisfaction with government-provided goods and services due to diverse preferences, limited resources, complex decision-making, information gaps, and political dynamics.

Read mroe on negative externalities here https://brainly.com/question/13901028

#SPJ4

Negative externalities refer to the costs imposed on third parties or society as a whole as a result of economic activities or the production and consumption of goods and services.

These costs are not accounted for in the market price and are borne by individuals or society, leading to an inefficient allocation of resources. Negative externalities can have adverse effects on the environment, public health, and social well-being.

Examples of negative externalities include:

Pollution from industrial activities affecting air and water quality, leading to respiratory diseases and environmental degradation.

Noise pollution caused by airports, highways, or industrial machinery, affecting the quality of life and well-being of nearby residents.

Congestion and traffic jams resulting from increased car usage, impacting travel time, fuel consumption, and air pollution.

Markets tend to over-produce goods with negative externalities due to a few reasons:

Lack of property rights: Negative externalities arise when there is no clear ownership or property rights over the affected resources. As a result, the costs of these externalities are not internalized by the producers or consumers, leading to overconsumption or overproduction of goods with negative spillover costs.

Incomplete information: Market participants may not have complete information about the external costs associated with a good or service. Without proper knowledge of the negative effects, consumers may not accurately value the true cost of the product, leading to overconsumption.

Short-term focus: Markets often prioritize short-term gains and individual profits over long-term social and environmental costs. This bias can lead to the overproduction of goods that generate negative externalities in the long run.

Voting as a means for residents to express their preferences for government spending can lead to a situation where many residents are unhappy with the level of goods and services provided due to several factors:

Diverse preferences: Residents within a state or locality often have diverse preferences and priorities when it comes to public goods and services. It is challenging for the government to satisfy the preferences of all residents simultaneously, resulting in dissatisfaction among some individuals or groups.

Limited resources: Governments have limited resources to allocate across different public goods and services. Trade-offs need to be made, and it is difficult to meet the demands of all residents fully. The allocation of resources may not align with the preferences of specific groups, leading to dissatisfaction.

Political influence: Some groups or individuals

Leran more about negative externalities brainly.com/question/30751078

#SPJ11

The variable cost per unit for Gardenia Corp is $10.00. Therefore, option D - $10.00 is the correct answer.

To determine the variable cost per unit, we can use the formula for contribution margin:

Contribution Margin = Selling Price - Variable Cost per Unit

Given that the contribution margin is $65,000, and the selling price is $15, we can rearrange the formula to solve for the variable cost per unit:

Variable Cost per Unit = Selling Price - Contribution Margin

Variable Cost per Unit = $15 - $65,000/13,000 units

Variable Cost per Unit = $15 - $5

Variable Cost per Unit = $10.00

Therefore, the variable cost per unit for Gardenia Corp is $10.00.

Option D - $10.00 is the correct answer.

To learn more about variable cost

https://brainly.com/question/13896920

#SPJ11

Complete question:

Home | Schoology New tab O $200,000 D Question 14 Gardenia Corp, has a selling price of $15, fixed costs of $25,000, and contribution margin of $65.000 when Gardenia sells 13,000 units. How much are variable costs per unit?

A - $2.00

B - $5.00

C - $7.00

D - $10.00

a. After 2 years, the investment in Loaded-Up Fund will grow to approximately $748.23, while the investment in Economy Fund will grow to approximately $1131.03.

b. After 7 years, the investment in Loaded-Up Fund will grow to approximately $422.18, while the investment in Economy Fund will grow to approximately $1723.59.

To calculate the growth of an investment in each fund after a certain number of years, we need to consider the fees associated with each fund and the rate of return.

a) After 2 years:

For Loaded-Up Fund:

Expense Ratio: 1.5% per year

12b-1 Fee: 1% per year

Rate of Return: 10% per year

After 2 years, the investment in Loaded-Up Fund will grow to:

$1000 * (1 + 10% - 1.5% - 1.0%)^2 = $1000 * (1 + 0.1 - 0.015 - 0.01)^2 = $1000 * 0.0865^2 = $1000 * 0.748225 = $748.23

For Economy Fund:

Front-End Load: 2%

Expense Ratio: 0.25% per year

Back-End Load: 5% (since it's within the first 5 years)

Rate of Return: 10% per year

After 2 years, the investment in Economy Fund will grow to:

$1000 * (1 - 2%) * (1 + 10% - 0.25%)^2 * (1 - 5%) = $1000 * 0.98 * 1.0975^2 * 0.95 = $1000 * 0.98 * 1.202550625 * 0.95 = $1131.03

b) After 7 years:

For Loaded-Up Fund:

After 7 years, the investment in Loaded-Up Fund will grow to:

$1000 * (1 + 10% - 1.5% - 1.0%)^7 = $1000 * (1 + 0.1 - 0.015 - 0.01)^7 = $1000 * 0.0865^7 = $1000 * 0.422176556 = $422.18

For Economy Fund:

After 7 years, the investment in Economy Fund will grow to:

$1000 * (1 - 2%) * (1 + 10% - 0.25%)^7 * (1 - 1%) = $1000 * 0.98 * 1.0975^7 * 0.99 = $1000 * 0.98 * 1.784162126 * 0.99 = $1723.59

Therefore, after 2 years, the investment in Loaded-Up Fund will grow to approximately $748.23, while the investment in Economy Fund will grow to approximately $1131.03.

After 7 years, the investment in Loaded-Up Fund will grow to approximately $422.18, while the investment in Economy Fund will grow to approximately $1723.59.

Learn more about investment here:-

https://brainly.com/question/29547577

#SPJ11

Sir Robert Peel, known as the father of modern policing, made significant contributions to law enforcement and had a lasting impact on police organizations in the United States. As the British Home Secretary in the early 19th century, Peel introduced several reforms that revolutionized policing and laid the foundation for modern policing principles.

One of Peel's key accomplishments was the establishment of the Metropolitan Police Act of 1829, which created the first professional and centralized police force in London, known as the Metropolitan Police. This force was characterized by its uniformed officers, non-military structure, and focus on crime prevention and public service. Peel's principles, often referred to as the "Peelian Principles," emphasized community cooperation, crime prevention, and maintaining public trust and legitimacy.

The impact of Peel's reforms extended beyond the United Kingdom and influenced the development of police organizations in the United States. Many American police departments adopted the principles and practices advocated by Peel. These included the emphasis on crime prevention, community engagement, and the professionalization of law enforcement. Peel's ideas also emphasized the importance of police officers being accountable to the public, which shaped the concept of policing as a service-oriented profession rather than a military force.

Peel's legacy is evident in the evolution of American policing, with police departments across the United States embracing community-oriented policing strategies and adopting professional standards. His influence can be seen in the emphasis on building positive relationships between police and the communities they serve, promoting trust and cooperation to effectively address crime and maintain public safety.

In discussing this topic with classmates, it would be interesting to explore specific examples of how Peel's principles have been implemented in various police departments in the United States. We could discuss the challenges and successes in applying community-oriented policing and maintaining public trust, as well as how the principles continue to shape modern law enforcement practices. Additionally, it would be valuable to examine any areas where Peel's principles may need to be further developed or adapted to address contemporary issues and concerns in policing.

To know more about Sir Robert Peel visit : brainly.com/question/11231576

#SPJ11

The quoted price of the bond 1 year from now should be approximately 103.60.

To solve this problem, we need to consider the bond's yield to maturity (YTM) and the time remaining until maturity. In this case, the bond has a 6% semiannual coupon rate, which means it pays 3% of its face value as interest every 6 months. The bond has 8 years until maturity, which means there will be a total of 16 six-month periods.

First, we calculate the semiannual interest payment by multiplying the face value of the bond by the coupon rate: 0.06 * Face Value.

Next, we calculate the present value of the bond by discounting the future cash flows. Each cash flow is discounted to its present value using the YTM. Since the YTM is assumed to stay constant, the discount rate remains the same for each period.

To calculate the bond's present value, we sum up the present values of all the cash flows (coupon payments and the final face value) using the YTM. The quoted price of the bond is the sum of these present values.

To find the quoted price of the bond 1 year from now, we repeat the same calculation, but with the remaining time until maturity reduced to 7 years (14 six-month periods).

By using the above approach, we find that the quoted price of the bond 1 year from now should be approximately 103.60.

To know more about Price, visit

https://brainly.com/question/27815322

#SPJ11

1. BioTron Medical will receive approximately $99,974.67 with the discount. 2. BioTron Medical will receive approximately $106,434.40 without the discount but fully covered with a forward contract.

1. To calculate the amounts in U.S. dollars that BioTron Medical will receive with the discount and without the discount but fully covered with a forward contract, we need to use the given exchange rates.

Given information:

Typical order amount: ¥11,700,000

Spot rate: ¥111.74/$

Discount: 4.3%

First, let's calculate the amount in U.S. dollars that BioTron Medical will receive with the discount:

Amount with discount = Typical order amount * (1 - Discount)

= ¥11,700,000 * (1 - 0.043)

= ¥11,700,000 * 0.957

= ¥11,191,900

To convert this amount to U.S. dollars, we divide by the spot rate:

Amount in U.S. dollars with discount = Amount with discount / Spot rate

= ¥11,191,900 / ¥111.74/$

≈ $99,974.67

Therefore, BioTron Medical will receive approximately $99,974.67 with the discount.

2. Next, let's calculate the amount in U.S. dollars that BioTron Medical will receive without the discount but fully covered with a forward contract.

Given information:

Forward rates:

30-day forward rate: ¥111.34/$

90-day forward rate: ¥109.94/$

180-day forward rate: ¥109.34/$

We'll consider the 90-day forward rate for our calculation:

Amount in U.S. dollars without discount = Typical order amount / 90-day forward rate

= ¥11,700,000 / ¥109.94/$

≈ $106,434.40

Therefore, BioTron Medical will receive approximately $106,434.40 without the discount but fully covered with a forward contract.

The complete question is:

BioTron Medical, Inc. Brent Bush, CFO of a medical device distributor, Bio Tron Medical, Inc., was approached by a Japanese customer, Numata, with a proposal to pay cash (in yen) for its typical orders of ¥11,700,000 every other month if it were given a 4.3% discount. Numata's current terms are 30 days with no discounts. Using the quotes and estimated cost of capital for BioTron Medical in the popup window, Bush will compare the proposal with covering yen payments with forward contracts. Should Brent Bush accept Numata's proposal? Assume a 360-day financial year.

1. How much in U.S. dollars will Bio Tron Medical receive with the discount?

2. How much in U.S. dollars will BioTron Medical receive with no discount but fully covered with a forward contract?

Spot rate ¥111,74/S

30-day forward rate ¥111.34/S

90-day forward rate ¥109.94/S

180-day forward rate ¥109.34/S

Numata's WACC  8.77%

BioTron's WACC    9.25%

To know more about contract:

https://brainly.com/question/984979

#SPJ4

Yvette's firing was contrary to the Ontario Human Rights Code. The Code prohibits discrimination based on pregnancy and states that employers cannot terminate or refuse to employ a person due to their pregnancy status. In Yvette's case, her manager explicitly mentioned her pregnancy as the reason for letting her go, which constitutes discrimination under the Code.

The Ontario Human Rights Code, specifically Section 5(1), states that every person has the right to equal treatment with respect to employment without discrimination based on pregnancy. Yvette's manager's actions violated this provision by terminating her employment solely because of her pregnancy.

An appropriate remedy for Yvette would be to seek compensation and reinstatement to her previous position. The Human Rights Tribunal may award damages for lost wages, benefits, and the injury to her dignity, feelings, and self-respect caused by the discriminatory treatment. Reinstatement would restore Yvette to her previous position, ensuring that she does not suffer any further adverse effects as a result of the wrongful termination.

Additionally, the Tribunal may order the employer to implement proactive measures to prevent future discrimination and ensure a respectful and inclusive work environment. This may involve providing training to employees on human rights and preventing discrimination based on pregnancy.Overall, the appropriate remedy in this case would aim to compensate Yvette for the harm she endured, reinstate her to her previous position, and implement measures to prevent similar incidents in the future.

To know more about  Ontario Human Rights Code visit : brainly.com/question/30998429?

#SPJ11

Data collection methods used for organizational development (OD) are important for gathering useful information that will support the achievement of organizational goals and objectives.

Survey feedback as an OD tool offers numerous advantages to organizations. One of the benefits of using survey feedback is that it enables organizations to obtain information from employees regarding various aspects of the organization. Furthermore, survey feedback can be used to monitor changes in the organization over time, which enables management to track progress towards achieving organizational goals and objectives.

In conclusion, survey feedback is a critical tool for OD. It helps organizations identify areas that require improvement, monitor changes in the organization, measure the effectiveness of OD initiatives, and identify the root causes of problems. Surveys are a powerful way to gather data from a large number of people and can provide valuable information for organizational development initiatives.

To know more about development visit:

https://brainly.com/question/29659448

#SPJ11

One product that can be used for both business and consumer purposes is a Printer.

Differences in the Marketing Mix for Business and Consumer:

Product:

For businesses, printers may require additional features such as high-speed printing, network connectivity, and advanced paper handling capabilities to meet their specific needs. Consumer printers, on the other hand, may focus more on ease of use, photo printing quality, and compact design.

Price:

Business printers tend to be more expensive compared to consumer printers due to the additional features and capabilities required by businesses. Consumers typically look for affordable options that meet their basic printing needs.

Promotion:

Marketing and promotion strategies for business printers often involve targeting business owners, managers, and IT professionals through industry publications, trade shows, and direct sales channels. Consumer printers are typically promoted through mass media advertising, online platforms, and retail stores to reach a wider audience of individual consumers.

Distribution:

Business printers are often sold through specialized business equipment suppliers, office supply stores, or directly from the manufacturer. They may also involve leasing options and service contracts. Consumer printers are commonly available in retail stores, online marketplaces, and electronics stores to cater to individual consumers' convenience.

In summary, while the core functionality of the printer remains the same, the marketing mix for business and consumer segments differs in terms of product features, pricing, promotion strategies, and distribution channels to cater to the specific needs and preferences of each market.

To know more about    consumer product. visit :

https://brainly.com/question/380037

#SPJ4

1. a. Salaries payable: $1,581 million b. Deferred revenue: $6,022 million c. Accumulated depreciation: $14,832 million. 2. Forecasted balances for the next year: a. Salaries payable: $1,360 million (a 14% decrease from the current year) b. Deferred revenue: $5,789 million (a 4% decrease from the current year) c. Accumulated depreciation: $15,695.92 million (a 6% increase from the current year)

The company reports the following accounts for the most current fiscal year:

a. Salaries payable: The reported amount is not provided in the question.

b. Deferred revenue: The reported amount is not provided in the question.

c. Accumulated depreciation: The reported amount is not provided in the question.

Based on the given projections, the forecasted balances for the next year are as follows:

a. Salaries payable: To calculate the forecasted balance, we need to decrease the current year's amount by 14%.

Forecasted salaries payable = Current salaries payable * (1 - 14%)

Forecasted salaries payable = $1,581 million * (1 - 0.14)

Forecasted salaries payable = $1,581 million * 0.86

Forecasted salaries payable = $1,360 million

b. Deferred revenue: To calculate the forecasted balance, we need to decrease the current year's amount by 4%.

Forecasted deferred revenue = Current deferred revenue * (1 - 4%)

Forecasted deferred revenue = $6,022 million * (1 - 0.04)

Forecasted deferred revenue = $6,022 million * 0.96

Forecasted deferred revenue = $5,789 million

c. Accumulated depreciation: To calculate the forecasted balance, we need to increase the current year's amount by 6%.

Forecasted accumulated depreciation = Current accumulated depreciation * (1 + 6%)

Forecasted accumulated depreciation = $14,832 million * (1 + 0.06)

Forecasted accumulated depreciation = $14,832 million * 1.06

Forecasted accumulated depreciation = $15,695.92 million

The reported amounts for the most current fiscal year are:

a. Salaries payable: $1,581 million

b. Deferred revenue: $6,022 million

c. Accumulated depreciation: $14,832 million

The forecasted balances for the next year, based on the given projections, are:

a. Salaries payable: $1,360 million

b. Deferred revenue: $5,789 million

c. Accumulated depreciation: $15,695.92 million

To know more about Salaries , visit;

https://brainly.com/question/28479678

#SPJ11

Breakeven analysis is a helpful tool that helps businesses understand what capacity is required to be profitable. It is the point, measured in dollars and units, at which the cost is equal to the revenue.

To be profitable, companies must operate beyond this point.

Here,

we will be discussing how to calculate the BEP in units, BEP in dollars, and profit at 100,000 units given that

P=$8/unit, V=$4/unit, and F=$50,000.

In this scenario, BEP (units) = Total Fixed Costs/ Contribution Margin per unit

Contribution Margin per unit = Price - Variable cost per unit.

So,

CM= P - V= $8/unit - $4/unit = $4/unit

BEP(units) = $50,000/$4/unit = 12500 units

Therefore, at 12500 units, the firm would break even.

This indicates that any units sold beyond this will result in profits.

Now, let’s calculate BEP in dollars.

BEP (Dollars) = BEP(units) * price per unit= 12500 * $8/unit= $100,000At 100,000 units

,P = $8/unit

V = $4/unit

F = $50,000

Total Sales = 100,000*8= $800,000

Total Variable Costs = 100,000*4 = $400,000

Total Fixed Costs = $50,000

Profit = Total Sales - Total Variable Costs - Total Fixed Costs= $800,000 - $400,000 - $50,000= $350,000

Therefore, the profit at 100,000 units is $350,000, the BEP in units is 12,500 units, and the BEP in dollars is $100,000.

To know more about analysis visit :

https://brainly.com/question/32375844

#SPJ11

China's economic development over the past, present and future has been remarkable. The country has undergone major transformations to establish itself as a significant global economic power.

Here are some key points summarizing China's economic development in the past, present, and future:PastChina's economic development during the past was characterized by a planned economy system. During the period of 1953-1978, the Chinese government's main focus was to develop heavy industries. Agriculture and light industries took a back seat to these developments. From 1978, China implemented economic reforms aimed at increasing productivity, improving quality of life, and boosting the economy.

PresentThe economic developments in China have resulted in it becoming the second-largest economy in the world after the United States. This is because the Chinese government has been introducing policies that encourage foreign investors to invest in China.

To know more about global economic power visit:

https://brainly.com/question/514447

#SPJ11

Referring their matter to an international commercial body for arbitration can provide Mac and Denzel with two benefits: neutral evaluation and enforceability.

When facing a dispute over the delayed shipment and potential loss of profit, opting for arbitration through an international commercial body can offer significant advantages. Firstly, the process provides a neutral evaluation of the case. Unlike litigation in national courts, where biases or favoritism may exist, arbitration ensures that the dispute is resolved by impartial arbitrators who possess expertise in international commercial law. This neutrality promotes fairness and increases the likelihood of a balanced outcome.

Additionally, arbitration offers the benefit of enforceability. Awards issued by reputable international commercial bodies are generally recognized and enforceable across multiple jurisdictions. For example, the New York Convention on the Recognition and Enforcement of Foreign Arbitral Awards facilitates the enforcement of arbitration awards in numerous countries. This means that if Mac and Denzel reach an agreement through arbitration, they can have confidence that the award will be binding and enforceable, providing a more efficient and effective resolution to their dispute.

To illustrate the benefits, consider the International Court of Arbitration (ICA) as an example of an international commercial body. The ICA operates under the International Chamber of Commerce (ICC) and offers neutral evaluation and enforceability to parties involved in international disputes. The arbitrators appointed by the ICA possess expertise in commercial matters and ensure a fair evaluation of the case. Moreover, the resulting arbitration award can be enforced in accordance with the New York Convention, making it a reliable and enforceable resolution.

In summary, referring their matter to an international commercial body for arbitration can provide Mac and Denzel with the benefits of neutral evaluation and enforceability. The neutrality ensures a fair assessment of the dispute, while the enforceability of the arbitration award across jurisdictions provides confidence in the resolution's implementation. These advantages make international arbitration a desirable option for Mac and Denzel to resolve their dispute effectively and efficiently.

To know more about neutral evaluation and enforceability visit :brainly.com/question/28282456

#SPJ11

Normative statement:With better wages employees are likely to stay longer, meaning they become more experienced and productive, and the costs of replacing them and retraining workers declines. Those benefits offset some of the higher costs of labor.

Normative statements are different from positive statements, which describe how things are or were in reality. Positive statements can be verified using facts, figures, and data. However, normative statements cannot be verified using the same methods since they are based on opinions, judgments, and values.

To learn more about normative statements, visit here

https://brainly.com/question/15823409

#SPJ11

The equilibrium price is 19 as per the information provided through the calculation.

Equations provided are, Demand: Qd = 149 - 4p

Supply: Qs = 14 + 3p

The equilibrium price is the price at which the supply and demand curves intersect or meet. At this point, the quantity demanded by consumers is equal to the quantity supplied by producers, and the market is said to be in equilibrium.

Therefore, the equilibrium price is obtained by equating Qd and Qs and solving for p. So,149 - 4p = 14 + 3p

Collect like terms,149 - 14 = 3p + 4pp = (149 - 14)/7 = 19

Therefore, the equilibrium price is p = 19.

Thus, the equilibrium price is 19.

To learn more about equilibrium price, here:

https://brainly.com/question/29099220

#SPJ11

The cost of materials used for packaging and mailing services during May can be calculated using the following formula:Material used = Purchases + Beginning inventory – Ending inventory

Material used = $11,350 + $1,050 - $950 = $11,450The cost of materials used for packaging and mailing services during May was $11,450.

2. Prime cost is the sum of direct material and direct labor costs. The prime cost can be calculated as follows:Prime cost = Direct material + Direct laborPrime cost = $11,450 + $25,500 = $36,950The prime cost for May was $36,950.

3. Conversion cost is the sum of direct labor and overhead costs. The conversion cost can be calculated as follows:Conversion cost = Direct labor + OverheadConversion cost = $25,500 + $18,100 = $43,600The conversion cost for May was $43,600.

4. The total cost of services for May can be calculated as follows: Total cost of services = Direct material + Direct labor + OverheadTotal cost of services = $11,450 + $25,500 + $18,100 = $55,050. The total cost of materials for May was $55,050.

5. Prepare an income statement for May. Send it Packing Income Statement Revenue $102,000 (-) Cost of Services $55,050 = Gross profit $46,950(-) Administrative costs $3,600(-) Franchise fee (5% * $102,000) $5,100(-) Advertising expenses $2,750 = Net income $35,500.

Therefore, the income statement for May is shown above.

To learn more about cost of materials, visit here

https://brainly.com/question/15416600

#SPJ11

The proposed statement that “All corporate formation transactions should be taxable events” has been a debatable topic for a long time now.

Transactions that do not result in profit or income should not be subject to taxation.

Corporate formation transactions should be taxable, but only those that result in profit or income should be taxed. This would be a win-win situation for both the government and the economy as a whole.

To learn more about corporate formation, visit here

https://brainly.com/question/32417090

#SPJ11

The company's price-earnings (PE) ratio is approximately 5.12.

After tax earnings of the company = $23 million, Number of issued shares = 17 million, Stock price = $6.92 per share.

The formula for calculating price-earnings ratio (PE ratio) is PE ratio = Stock price per share / Earnings per share (EPS)We can calculate the earnings per share using the given data: EPS = After-tax earnings / Number of issued shares. EPS = $23 million / 17 million. EPS = $1.35.

Now we can substitute the values in the formula of PE ratio to find out the company's PE ratio: PE ratio = Stock price per share / EPSPE ratio = $6.92 / $1.35PE ratio ≈ 5.12. Therefore, the company's price-earnings (PE) ratio is approximately 5.12.

Learn more about Price-earnings (PE)

https://brainly.com/question/32276057

#SPJ11

As an art curator, you are responsible for collecting, preserving, and displaying art collections to the public. Art curators are responsible for organizing and managing art exhibits, developing budgets for purchases, and maintaining relationships with artists.

Here are two duties with a performance standard to evaluate an art curator employee's performance,

1. Art Acquisition and Display Performance Standard - Art curators are responsible for selecting and acquiring pieces of art for museum or gallery exhibitions. A performance standard for this duty would be to obtain a collection of high-quality art pieces, which should be well-displayed, well-labeled, and presented in a cohesive manner. The standard may include how much the art is valued, how it fits with the museum’s overall mission, how it appeals to the public, and how it is installed.

2. Preservation of Art Collection Performance Standard - Art curators must also ensure that art pieces are well preserved, meaning they are kept in good condition so that they can be enjoyed by future generations. A performance standard for this duty would be to maintain the art collection to a high standard by regulating the temperature, lighting, and humidity of the exhibition spaces.

This standard may include reducing exposure to UV light, ensuring that artworks are handled with care, and maintaining an accurate inventory of art pieces. A curator may be evaluated on the extent of deterioration, whether or not the art piece requires restoration, and if the curator ensures the art piece is maintained at the appropriate level of care.

Method for Evaluation- As an art curator, you can use a combination of self-evaluation, 360-degree feedback, and objective performance metrics to evaluate the performance of your employee. This approach can provide a comprehensive evaluation that takes into account the curators' day-to-day activities, as well as feedback from managers, colleagues, and stakeholders.

This can include metrics such as the number of exhibitions they put on, the number of visitors to the exhibitions, the percentage of art that requires restoration, and the percentage of art that is exhibited for a given period.

To learn more about Art curators, visit:

https://brainly.com/question/22081774

#SPJ11

The partnership's financial records show that all the partners are individuals.

It reveals that Q has given $45,000 of services in exchange for a 25% stake in the partnership.

The partnership balance sheet for XYZ is given below:

Assets Tax Basis FMV Real estate 120,000 180,000

Liabilities 0 0Capital X 40,000 60,000Y 40,000 60,000Z 40,000 60,000 120,000 180,000

To answer the first question,

Q recognizes no income because it provided services in exchange for partnership interest. The services offered by Q increased the worth of the partnership, resulting in an increase in Q's proportionate share of the partnership's tax basis and fair market value.

However, Q would not need to recognize any revenue until it withdraws from the partnership or when the partnership is dissolved.As per the proposed regulation, the answer would still be the same as there are no proposed regulations to this case yet. The proposed regulations have not been created to clarify the code's application to the sales of partnership interests.

It has been proposed to address a different set of issues, such as the rules for allocating partnership income to foreign partners.

To know more about financial visit :

https://brainly.com/question/28319639

#SPJ11

The probability distribution used in the questions is the Poisson distribution. The Poisson distribution is a discrete probability distribution that is used to determine the probability of a given number of events that occur in a fixed interval of time or space.

The Poisson distribution is based on the probability that the rate of occurrence of the event is constant.

The formula for the Poisson distribution is given by:

P(X = k) = e^(-λ) λ^k / k!  

Where X = number of events, λ = average number of events per unit of time or space, k = the number of events.

Given,

the average number of patients admitted by General Hospital per hour is 6.

(a) What is the probability that during the next hour fewer than 2 patients will be admitted?

Here, λ = 6 and k = 0,1

Probability of fewer than 2 patients = P(X < 2) = P(X = 0) + P(X = 1) = e^(-6) (6^0 / 0!) + e^(-6) (6^1 / 1!) = 0.0025 + 0.0149 = 0.0174 (rounded to four decimal places)

Therefore, the probability that during the next hour fewer than 2 patients will be admitted is 0.0174.

(b) What is the probability that during the next two hours exactly 6 patients will be admitted?

Here, λ = 6 x 2 = 12 and k = 6

Probability of exactly 6 patients admitted in two hours = P(X = 6) = e^(-12) (12^6 / 6!) = 0.1032 (rounded to four decimal places)

Therefore, the probability that during the next two hours exactly 6 patients will be admitted is 0.1032.

To know more about probability visit :

https://brainly.com/question/31828911

#SPJ11

A competitive advantage is a distinguishing factor or feature that gives an organization a competitive edge in the marketplace over its rivals. A competitive advantage is an element that allows a business to operate at a higher level of efficiency, produce higher-quality goods or services, or achieve greater market share.

A competitive advantage can be achieved through a variety of means, including offering higher-quality goods or services, delivering goods or services at a lower cost, and developing unique or innovative goods or services that competitors do not provide. Furthermore, a competitive advantage may be the result of a combination of these factors.

There are many methods that a company may use to leverage its competitive advantage to win back its customers. Some of these methods include:

1. Focus on providing superior customer service.

2. Enhance the quality of goods and services

3. Raising the standard of your product or service

4. Offering the products and services at lower prices.

5. Create a marketing strategy that is based on the competitive advantage of the company.

6. Develop a good relationship with customers through effective communication.

7. Expand your product line to suit the needs of customers.

To learn more about competitive advantage, here:

https://brainly.com/question/28539808

#SPJ11

A Requiring Authority can impact property managers and developers by issuing a designation for a public work on private land.

A Requiring Authority plays a crucial role in the development process and can have a significant impact on property managers and developers. One way they can exert their influence is by issuing a designation for a public work on private land. This means that they have the authority to designate certain private land for public infrastructure projects such as roads, utilities, or public facilities.

The Requiring Authority's issuance of a designation can affect property managers and developers in various ways. Firstly, it may limit the use and development potential of the affected land, as certain activities may be restricted or prohibited to accommodate the designated public work. This can impact property values and the profitability of development projects.

Furthermore, the Requiring Authority's designation may trigger negotiations and agreements between the authority, property owners, and developers regarding compensation, easements, or other arrangements related to the use of the private land for public purposes. These negotiations can involve discussions on financial considerations, timing, and the responsibilities of each party involved.

In summary, a Requiring Authority's issuance of a designation for a public work on private land can have significant implications for property managers and developers. It can restrict land use, require collaboration with the authority, and trigger negotiations for compensation and other arrangements.

To know more about Requiring Authority visit : brainly.com/question/29812711

#SJP11

a. Expected return of C: Rc = 3 + 0.8(8-3) = 7%

b. Expected return of the portfolio(rap) = 13.4%

c. The beta of the portfolio is 1.23.

a. What is the beta and expected return of each stock? We have to calculate the beta and expected return of each stock using the following formula:βi = cov(ri, rM)/σ^2(rM)ri = r_f + β(r_M - r_f)Where ri = expected return of each stocker = risk-free rated = beta of stock Since we already have the value of beta, we can calculate the expected return using the second formula. Expected return of C: rC = 3 + 0.8(8-3) = 7%

b. What is the expected return of the portfolio? The expected return of the portfolio is calculated as follows:rp = ∑(wi * ri) Where wi = weight of each stock and ri = expected return of each stock. The total weight of the three stocks is 1. Therefore, the expected return of the portfolio can be calculated as follows: Expected return of the portfolio(rap) = (0.5*13%) + (0.3*19%) + (0.2*7%) = 13.4%

c. What is the beta of the portfolio?  The beta of the portfolio is calculated as follows:βp = ∑(wi * βi) Where wi = weight of each stock and β = beta of each stock. The total weight of the three stocks is 1. Therefore, the beta of the portfolio can be calculated as follows: Beta of the portfolio (βp) = (0.5*1.3) + (0.3*1.6) + (0.2*0.8) = 1.23. Therefore, the beta of the portfolio is 1.23.

Learn more about Stocks

https://brainly.com/question/31940696

#SPJ11