Water flows with an average velocity of 1.0 m/s and a normal depth of 0.5 m in a wide rectangular channel. Is the flow subcritical or supercritical?

Answer:

d = 1.9 in

Explanation:

Since, the tension force is greater than the shear force. Hence, the area of cross-section shall be limited by the tension:

Tension = Force/Area

Area = Force/Tension

Area = 89 kips/31 ksi

Area = 2.87 in²

but,

Area = πd²/4

2.87 in² = πd²/4

(2.87 in²)(4)/π = d²

d = √(3.65 in²)

d = 1.9 in

Answer:

mmmmmm

Explanation:

ffmfmfmmfmfmmfmfmfmfmfmffmfmfmfmfmfmfmfmfmfmfmfmfffmmfmffmmmfmfmfmfmfmfmfmfffmfmfmfmfmfmmfmfmmfmfmfmfmfmfffmfmfffmfmfmfmffmmfmfmffmfmfmfmfffmfmfmfmfmmmmfmfmfmfmfmfmfmmmfmfmfmfmfmfmfmfmmfmfmfmfmfmfmfmfmfmfmffmfmfmfmfmfmmfmfmmmmmfmfmfmffmfmfmfmffmffmfm

Answer:

10

Explanation:

The speed of the chain is the same for both sprockets.

vᵢ = vₒ

ωᵢ rᵢ = ωₒ rₒ

The sprockets have the same pitch, so the radius is proportional to the number of teeth.  So we can say:

ωᵢ nᵢ = ωₒ nₒ

Plugging in values:

(60 rpm) (40) = (240 rpm) nₒ

nₒ = 10

The output sprocket has 10 teeth.  This makes sense, if the output sprocket is 4 times smaller, it will turn 4 times faster than the input sprocket.

Answer: it is 10 teeth and the guy under me already explained soo

Explanation:

Answer:

Answer: B) Scanning the computer and deleting any viruses.

Explanation:

Some of the feedback I hear from new developers working on a programming problem revolves around uncertainty of where to start. You understand the problem, the logic, basics of the syntax, etc. If you see someone else’s code or have someone to guide you, you can follow along. But maybe you feel uncertain about doing it yourself and have trouble turning your thoughts into code at first even though you understand the syntax or logic. Here’s my process and some tips to tackling a sample problem that hopefully some of you may find helpful in your journey.

If you need further expenation then:

Some of the feedback I hear from new developers working on a programming problem revolves around uncertainty of where to start. You understand the problem, the logic, basics of the syntax, etc. If you see someone else’s code or have someone to guide you, you can follow along. But maybe you feel uncertain about doing it yourself and have trouble turning your thoughts into code at first even though you understand the syntax or logic. Here’s my process and some tips to tackling a sample problem that hopefully some of you may find helpful in your journey.

May i please have brainliest

Answer:

B. scanning the computer and deleting any viruses

Explanation:

I took the test on edge, and this makes most sense to me. Good luck:)

Answer:

NG=64 teeth

dG=384mm

dP=96mm

C=240mm

Explanation:

step one:

given data

module m=6mm

velocity ratio VR=4

number of teeth of pinion Np=16

Step two:

Required

1. Number of teeth on the driven gear

[tex]N_G=N_P*V_R\\\\N_G=16*4\\\\N_G=64[/tex]

The driven gear has 64 teeth

2.  The pitch diameters

The driven gear diameter

[tex]d_G=N_G*m\\\\d_G=64*6\\\\d_G=384[/tex]

The driven gear diameter is 384mm

The pinion diameter

[tex]d_P=N_P*m\\\\d_P=16*6\\\\d_P=96[/tex]

Pinion diameter is 96mm

3. Theoretical center-to-center distance

[tex]C=\frac{d_G+d_P}{2} \\\\C=\frac{384+96}{2} \\\\C=\frac{480}{2}\\\\C=240[/tex]

The theoretical center-to-center distance is 240mm

The results are listed below:

First, we proceed to find the number of teeth of each gear ([tex]N_{D}, N_{P}[/tex]) based on the fact that gear only fit when they have the same module ([tex]m[/tex]). The velocity ratio ([tex]r_{v}[/tex]) is defined by the following relationship:

[tex]r_{v} = \frac{N_{D}}{N_{P}}[/tex] (1)

If we know that [tex]r_{v} = 4[/tex] and [tex]N_{P} = 16[/tex], then the number of teeth of the driven gear is:

[tex]N_{D} = r_{v}\cdot N_{P}[/tex]

[tex]N_{D} = 4\cdot (16)[/tex]

[tex]N_{D} = 64[/tex]

The driven gear has 64 teeth.

The pitch diameter ([tex]D[/tex]) is obtained by multiplying the number of teeth ([tex]N[/tex]) by module ([tex]m[/tex]), in milimeters.

Pinion

[tex]D_{P} = m\cdot N_{P}[/tex] (2)

([tex]m = 6\,mm[/tex], [tex]N_{P} = 16[/tex])

[tex]D_{P} = (6\,mm)\cdot (16)[/tex]

[tex]D_{P} = 96\,mm[/tex]

Driven gear

[tex]D_{D} = m\cdot N_{D}[/tex] (3)

([tex]m = 6\,mm[/tex], [tex]N_{D} = 64[/tex])

[tex]D_{D} = (6\,mm)\cdot (64)[/tex]

[tex]D_{D} = 384\,mm[/tex]

The pinion has a diameter of 96 millimeters and the driven gear has a diameter of 384 millimeters.

Lastly, the theoretical center-to-center distance is calculated by the following formula:

[tex]d = \frac{1}{2}\cdot (D_{P}+D_{D})[/tex]  (4)

([tex]D_{P} = 96\,mm[/tex], [tex]D_{D} = 384\,mm[/tex])

[tex]d = \frac{1}{2}\cdot (96\,mm + 384\,mm)[/tex]

[tex]d = 240\,mm[/tex]

The theoretical center-to-center distance is 240 millimeters.

To learn more about gears, we kindly invite to check this verified question: https://brainly.com/question/15541463

Answer:

True

Explanation:

Answer:

Following are the solution to this question:

Explanation:

In question 1:

It Cmdlet gets the representatives of items, its features including their methods. Now use a variable (InputObject) and pipe the object to Even getting Member for both the purpose of specifying the object. It static variable utilizes their class members, not the case, to gather information regarding static members. Just use the (MemberType) parameter and receive only some forms of participants, such example NoteProperties.

In question 2:

Its Purchase cmdlet allows us to import components through our process. It can import components via remote sessions through the local client beginning with Window PowerShell 3.0.

In question 3:

The Syntax query to have all cmdlets lists it in the cmdlet title alphabetical order, but instead shows them in noun clauses.

Command:

[tex]\text{Type Cmdlet } | \text{Sort-Object -Property Noun} | \text{Format-Table -GroupBy Noun}[/tex]

In question 4:

Syntax:

[tex]\text{Get node} | \text{format list} | \text{Selection process, device forms, route group title all}[/tex]

[tex]| \text{Layout Table} | \text{Selection process}[/tex]

[tex]\$ s[/tex] = New-PSSession -ComputerName Server

Get-Module -PSSession [tex]\$ s[/tex] -ListAvailable

Answer:

Engineers spend up to 25 percent of their design process formulating and analyzing

the team that will work on the project.

Explanation:

During the design engineering stage of a project, the team is a very important decision item because determining the required team also determines the cost and the technical skill requirements of the project.  The cost depends, to a large extent, on the technical skills of those that will work on the project.  When the technical skill requirements are not met, the project will be massively jeopardized.

Answer:

the team that will work on the project.

Explanation:

Answer:

You'd need to know things like the weight of the car, the spring constant of the suspension springs.

Explanation:

Driving over the curb slowly does not have much of an "impact" because of the small potential energy it has but to find the force that results from going over the curb at a much higher speed, you would need to know the weight of the car since it directly impact the force that it applies. You also would need to know about the car's suspension, the spring material, how stiff the springs are and their spring constant to calculate the force they absorb.

I hope this answer helps.

Answer:

I think the answer is drop ceilings

Explanation:

Answer:

[tex]1.67\times 10^{9}\ \text{cm}^{-3}\text{s}^{-1}[/tex]

[tex]3.33\times 10^{19}\ \text{cm}^{-3}\text{s}^{-1}[/tex]

[tex]3.33\times 10^{19}\ \text{cm}^{-3}\text{s}^{-1}[/tex]

Explanation:

[tex]p_0[/tex] = Hole concentration = [tex]2\times 10^{16}\ \text{cm}^{-3}[/tex]

[tex]n_i[/tex] = Intrinsic concentration = [tex]10^{10}\ \text{cm}^{-3}[/tex]

[tex]\tau_{n0}[/tex] = Minority carrier life time = [tex]3\times 10^{-6}\ \text{s}[/tex]

[tex]\delta n[/tex] = Excess concentration of electrons = [tex]10^{13}\ \text{cm}^{-3}[/tex]

Majority carrier electron concentration is given by

[tex]n_0=\dfrac{n_i^2}{p_0}\\\Rightarrow n_0=\dfrac{(10^{10})^2}{2\times 10^{16}}\\\Rightarrow n_0=5000\ \text{cm}^{-3}[/tex]

Recombination rate is given by

[tex]R_{n0}=\dfrac{n_0}{\tau_{n0}}\\\Rightarrow R_{n0}=\dfrac{5000}{3\times 10^{-6}}\\\Rightarrow R_{n0}=1.67\times 10^{9}\ \text{cm}^{-3}\text{s}^{-1}[/tex]

The recombination rate is [tex]1.67\times 10^{9}\ \text{cm}^{-3}\text{s}^{-1}[/tex]

Recombination rate is given by

[tex]R_n=\dfrac{\delta_n}{\tau_{n0}}\\\Rightarrow R_n=\dfrac{10^{13}}{3\times 10^{-7}}\\\Rightarrow R_n=3.33\times 10^{19}\ \text{cm}^{-3}\text{s}^{-1}[/tex]

The recombination rate is [tex]3.33\times 10^{19}\ \text{cm}^{-3}\text{s}^{-1}[/tex]

Change in the recombination rate is

[tex]\Delta R_n=3.33\times 10^{19}-1.67\times 10^{9}\\\Rightarrow \Delta R_n=3.33\times 10^{19}\ \text{cm}^{-3}\text{s}^{-1}[/tex]

The change in the recombination rate is [tex]3.33\times 10^{19}\ \text{cm}^{-3}\text{s}^{-1}[/tex]

Answer: False

Explanation:

Answer:

5 multiply by 10 S/M

Based on the calculations, the incident wave would be down to 1 mV/m at a depth of 287.82 meters.

Since the medium is a wet soil, it is characterized by the following:

Next, we would determine loss tangent, so as to know if the wet soil is a low-loss medium:

For a low-loss medium; ε''/ε' = σ/ωε < 0.01.

[tex]\frac{\sigma}{\omega \epsilon} = \frac{5 \times 10^{-4} \;\times\; 36 \pi}{2\pi \;\times \;3 \times 10^9\; \times\; 10^{-9} \times \;9} \\\\\frac{\sigma}{\omega \epsilon} =3.32 \times 10^{-4}[/tex]

Therefore, the wet soil medium is a low-loss dielectric and its absorption (attenuation) coefficient is calculated by using this formula:

Note:

[tex]\alpha = \frac{\sigma}{2}\sqrt{\frac{\mu}{\epsilon}} \\\\\alpha = \frac{\sigma}{2} \times \frac{120\pi}{\sqrt{\epsilon_r} } \\\\\alpha =\frac{5 \times 10^{-4} \times 120\pi}{2 \times \sqrt{9} } \\\\[/tex]

α = 0.032 Np/m.

Now, we calculate the depth:

[tex]E(z) = E_oe^{-\alpha z} = 10e^{-\alpha z}\\\\10^{-3}=10e^{-0.032 z}\\\\ln(10^{-4})=-0.032 z\\\\-9.21 \times 10^9=-0.032z\\\\z=\frac{-92.1 0}{-0.032}[/tex]

z = 287.82 meters.

Read more on low-loss dielectric here: https://brainly.com/question/14167707

Answer:

1) Public key of the receiver is (e, n) is (5, 21)  and Private key of the receiver (d, n)   is (5 , 21) ,

2) the encryption of a message whose integer equivalent is 12 is 3

3) Decryption of the message ⇒ P = C^d mod n  

⇒ P = 3⁵ mod 21

⇒ P = 243 mod 21

⇒ 12

Explanation:

Given that,

p = 3

q = 7

e = 5

1)

Now, n = pq = 3 × 7 = 21

Ø(n) = (p-1) × (q-1)  = 2 × 6 = 12

Public key of the receiver is (e, n) is (5, 21)

and private key of the receiver is (d, n)

we have to find 'd' by using the expression

ed = 1 + kmodØ(n)

d = 1 + kmodØ(n) / e

now to get 'd' , we need to choose the least positive integer 'k', by substituting different values of ‘k’ from 0,

so for k =0 , d = (1+0) / 5 = 0.2 not an integer.

for k =1 , d = (1+12) / 5 = 13/5 = 2.6 not an integer.

for k =2 , d = (1+24) / 5 = 5 , now 5 is an integer

So k = 2 and d = 5

Private key of the receiver (d, n)   is (5 , 21)

2)

Now the encryption of a message whose integer equivalent is 12?

Encryption of the message ⇒ C = P^e mod n

⇒ C = 12⁵ mod 21

⇒ 248832 mod 21

⇒ 3

3)

Also the decryption gives back the message 12.

Decryption of the message ⇒ P = C^d mod n

⇒ P = 3⁵ mod 21

⇒ P = 243 mod 21

⇒ 12

Answer: 5   6    7

Explanation:

you can run this in python and get this result

The output for the given program is: 5   6    7

This refers to the high-level language that was created and is used for data structures due to its OOP (object-oriented programming).

Hence, this python code asks for an array of numbers in the range of 3 and when that is found, it should make a display of the number and increment it.

Read more about python programming here:
https://brainly.com/question/26497128

#SPJ2

Answer:

B

Explanation:

Answer:

num_count = 0

while num_count < 25:

   print(num_count)

   num_count += 3

Explanation:

A while loop statement is defined in the python source code above. An integer variable 'num_count' is defined and continuously incremented by three in the loop until it is greater than 25. the output of the while loop between 1 and 25 is print on the screen.

Solution :

Given :

Dry bulb temperature, T = 30 degree C

Absolute pressure, P = 102 kPa

Partial pressure of water vapor, [tex]$P_v$[/tex] = 1.5 kPa

a). Relative humidity is given by

[tex]$\phi = \frac{P_v}{P_{sat}}$[/tex]

At T = 30 degree C, from the steam table, we have saturation temperature as 4.2469 kPa.

[tex]$\phi = \frac{1.5}{4.2469}$[/tex]

  = 0.35319

  = 35.31 %

b). Humidity ratio,  

[tex]$w= 0.622 \times \frac{P_v}{P-P_v}$[/tex]

[tex]$w= 0.622 \times \frac{1.5}{102-1.5}$[/tex]

w = 0.009283 kg per kg of dry air

c). Dew point temperature is the saturation temperature at vapor pressure of air (can be found from steam table)

At [tex]$P_v$[/tex] = 1.5 kPa, saturation temperature = 1.02 degree C

∴ Dew point temperature = 13.02 °C

d). Humidity ratio can be be defined as the ratio of mass of water vapor to the mass of dry air.

i.e. [tex]$w=\frac{m_v}{m_a}$[/tex]

[tex]$0.009283 =\frac{10}{m_a}$[/tex]

∴ [tex]m_{a}[/tex] = 1077.170 kg of dry air

Answer:

hello some part of your question is missing below is the complete question

answer :

A) 162750 Ib.ft

B) - 64950 Ib.ft

Explanation:

Applying Muller-Breslau's law

we will make assumptions which include assuming an imaginary hinge at G

therefore the height of I.LD for B.M at G = ( 12 * 8 ) / 20 = 4.8

height of I.L.D at C = 2.4 ( calculated )

height of I.L.D at F = 1.5 ( calculated )

A) Determine Maximum positive moment produced at G

[tex]M ^+[/tex] = [ (1/2 * 20 * 4.8 ) ( 600 + 300 ) ] + [ ( 25 * 4.8 * 10^3 ) ] - [ ( 1/2 *2.4*20 ) * 300 ] + [ (1/2 * 1.5 * 10 ) ( 600 + 300 ) ]

      = 162750 Ib.ft

B)   Determine the maximum negative moment produced at G

[tex]M ^-[/tex] = [ ( 1/2 * 20 * 4.8 ) * 300 ] - [ ( 1/2 * 2.4 * 20 ) ( 600 + 300 ) ] - [ (2.5 * 10^3 * 2.4 ) ] + [ ( 1/2 * 1.5 * 10) * 300 ]

     = - 64950 Ib.ft

Answer:

A) complex power = apparent  power =  ( 108.253 + 62.5 i ) VA  

    active power = 108.25 watts

   reactive power = 62.5 VAR'S

    power factor = cos ∅ = cos 30° = 0.866 ( lagging )

also ; current lags voltage by 30°

B) your question is not well written hence no answer

Explanation:

A) v(t) = 100 cos (377t - 30° ) v

    Vrms = [tex]\frac{100}{\sqrt{2} }[/tex] ∠ -30°

    I(t) = 2.5cos(377t- 60°) A

  Irms = [tex]\frac{2.5}{\sqrt{2} }[/tex] ∠ -60°

determine complex power apparent power . ......  power factor

Note : complex power = apparent power

=( Irms ) * Vrms

=  ( [tex]\frac{2.5}{\sqrt{2} }[/tex] ∠ -60° ) * ( [tex]\frac{100}{\sqrt{2} }[/tex] ∠ -30° )  

= 125 ∠ 30°

= ( 108.253 + 62.5 i ) VA   ( complex power )

active power = 108.25 watts

reactive power = 62.5 VAR'S

power factor = cos ∅ = cos 30° = 0.866 ( lagging )

current lags voltage by 30°

Answer:

a) 294.34 days

b) Δh = 25.361 cm

Explanation:

Given data:

Thickness of clay layer = 18 ft

initial pressure = 0.75 ton/ft^2

final pressure = 1.5 ton/ft^2

Δp = 0.75 ton/ft^2

eo = 1.12

e1 = 0.98

k = 4.3 * 10^-7 cm/sec

A ) determine how long it will take to reach 70% consolidation

attached below is the detailed solution

T( time in days ) = 294.34 days

B) determine settlement at 70%

attached below is the detailed solution

Δh = 25.361 cm

Answer:

Cost per cubic yard to place concrete using each of the following alternatives:

Alternative a = $14.04

Alternative b = $14.71

Explanation:

a) Data and Calculations:

Work of concrete in footings = 140 cubic yards

a. Price of using crane and bucket = $225 per hour

Number of hours required for this setup = 7 hours

Transportation of the crane = $390

Therefore, total cost under this alternative = $1,965 (($225*7) + $390)

Cost per cubic yard = $14.04 ($1,965/140)

b. Price of using a concrete pump = $295 per hour

Number of hours required for this setup = 6 hours

Transportation of the pump = $290

Therefore, total cost under this alternative = $2,060 (($295*6) + $290)

Cost per cubic yard = $14.71 ($2,060/140)

Answer:

immediately

Explanation:

Answer: Partial pressures are 0.6 MPa for nitrogen gas and 0.4 MPa for carbon dioxide.

Explanation: Dalton's Law of Partial Pressure states when there is a mixture of gases the total pressure is the sum of the pressure of each individual gas:

[tex]P_{total} = P_{1}+P_{2}+...[/tex]

The proportion of each individual gas in the total pressure is expressed in terms of mole fraction:

[tex]X_{i}[/tex] = moles of a gas / total number moles of gas

The rigid tank has total pressure of 1MPa.

molar mass = 14g/mol

mass in the tank = 2000g

number of moles in the tank: [tex]n=\frac{2000}{14}[/tex] = 142.85mols

molar mass = 44g/mol

mass in the tank = 4000g

number of moles in the tank: [tex]n=\frac{4000}{44}[/tex] = 90.91mols

Total number of moles: 142.85 + 90.91 = 233.76 mols

To calculate partial pressure:

[tex]P_{i}=P_{total}.X_{i}[/tex]

For Nitrogen gas:

[tex]P_{N_{2}}=1.\frac{142.85}{233.76}[/tex]

[tex]P_{N_{2}}[/tex] = 0.6

For Carbon Dioxide:

[tex]P_{total}=P_{N_{2}}+P_{CO_{2}}[/tex]

[tex]P_{CO_{2}} = P_{total}-P_{N_{2}}[/tex]

[tex]P_{CO_{2}}=1-0.6[/tex]

[tex]P_{CO_{2}}=[/tex] 0.4

Partial pressures for N₂ and CO₂ in a rigid tank are 0.6MPa and 0.4MPa, respectively.

Answer:A

Explanation:

B - it never talked about a steep path or not.

C- it never stated the speed.

d- more experienced driver makes a little bit of sence since she is new but she is new at the farm not driving.  

thats my guess.

Answer:

 b is the answer

Explanation:

Answer:

Fracture.

Explanation:

Fracture describes how a mineral looks when it breaks apart in an irregular way.

Answer:

Fracture.

Explanation:Fracture describes how a mineral looks when it breaks apart in an irregular way.

Answer: The movement of tectonic plates

Explanation:

Tectonic plates are the part of the earth's crust that both the ocean and land rest on. These plates are constantly moving as a result of currents in the mantle.

These movements cause stress on the surface which has the effect of fracturing rocks and thereby creating/ forming faults in the earth's crust. Sometimes faults form when these plates move away from each other and sometimes they are formed when they push into each other.

Answer:

Apalancamiento.

Explanation:

El apalancamiento es el uso de dinero prestado (deuda) para aumentar el rendimiento esperado del capital. El apalancamiento se mide como la relación entre la deuda que devenga intereses y los activos totales. Cuanto mayor sea la deuda que devenga intereses, mayor será el apalancamiento financiero o "aceleración". Esto puede tener un efecto positivo o negativo.

Los costos por intereses de este capital de préstamo suelen ser fijos y se deducen de los ingresos. Un préstamo permite que una organización genere más ingresos sin un aumento necesario en el capital. Como no es necesario recaudar ni mantener capital social adicional, no se requieren pagos de dividendos adicionales (que no se pueden deducir de las ganancias). Sin embargo, un alto apalancamiento puede ser beneficioso durante los tiempos de auge, pero puede conducir a serios problemas de flujo de efectivo durante una recesión, ya que es posible que no haya suficientes retornos para cubrir mayores costos de intereses y obligaciones de reembolso.

Answer:

c

Explanation: