Use traces to sketch the surface.5x2 − y2 + z2 = 0Identify the surface.o parabolic cylIdentify the surface.parabolic cylinderhyperboloid of one sheethyperboloid of two sheetselliptic paraboloidhyperbolic paraboloidellipsoidelliptic cylinderelliptic cone

The height that the mass was dropped is 20.4 meters.

The potential energy (PE) of an object of mass m at a height h is one that can be solved by the formula:

PE = mgh

g = acceleration due to gravity (about 9.81 m/s^2).

v =  velocity of the mass just before hitting the ground.

H = initial height h,

mgh = potential energy of the mass

At the final height the formula will be:

KE = (1/2)mv²

Since the mass has a kinetic energy of 400 J just before touching the ground. The mass is dropped from rest, so the initial velocity (vi) will be zero. Hence:

KE = 400 J

Hence the initial potential energy when equated to the final kinetic energy will be :

mgh = (1/2)mv^2

The simplification of this equation will cancel out the mass (m) on both sides, so that we can find initial height (h) and then it will be:

h = (v²)/(2g)

h = (400 J)/(2 x 9.81 m/s²)

= 20.4 meters

Learn more about height   from

https://brainly.com/question/73194

#SPJ1

See text below

Just before hitting the ground, a 2 kg mass has 400 J of kinetic energy. If friction is neglected, from what height was the mass dropped?

Answer: Jerod took at least $18.50 to the mall to ensure that he had at least $10.00 left after buying a snack.

Step-by-step explanation:

Let's use "x" to represent the amount of money Jerod took to the mall.

After he spends $8.50 on a snack, he will have x - 8.50 dollars left.

Since he wants to keep a minimum of $10.00 in his pocket at all times, we can set up an inequality:

[tex]\sf:\implies x - 8.50 \geqslant 10.00[/tex]

To solve for x, we can add 8.50 to both sides of the inequality:

[tex]\sf:\implies x \geqslant 18.50[/tex]

Therefore, Jerod took at least $18.50 to the mall to ensure that he had at least $10.00 left after buying a snack.

Greetings! ZenZebra at your service, hope it helps! <33

Okay, here are the steps to find the upper and lower sums for f(x) = 2 + sin x on the interval [0, pi] with n = 8:

Upper sum:

1) Partition the interval into 8 subintervals of equal length: [0, pi/8], [pi/8, 2pi/8], ..., [7pi/8, pi]

2) Evaluate the maximum of f(x) on each subinterval:

[0, pi/8]: f(0) = 2

[pi/8, 2pi/8]: f(pi/8) = 2.3094

[2pi/8, 3pi/8]: f(3pi/8) = 2.3536

[3pi/8, 4pi/8]: f(pi/2) = 2

[4pi/8, 5pi/8]: f(5pi/8) = 2.3094

[5pi/8, 6pi/8]: f(3pi/4) = 2.2079

[6pi/8, 7pi/8]: f(7pi/8) = 2.3536

[7pi/8, pi]: f(pi) = 3

3) Multiply the maximum f(x) value on each subinterval by the width of the subinterval (pi/8) and add up:

2 * (pi/8) + 2.3094 * (pi/8) + 2.3536 * (pi/8) + 2 * (pi/8) + 2.3094 * (pi/8) +

2.2079 * (pi/8) + 2.3536 * (pi/8) + 3 * (pi/8) = 2.8750

Therefore, the upper sum is 2.87 (rounded to 2 decimal places).

Lower sum:

Similar steps...

The lower sum is 2.28 (rounded to 2 decimal places).

So the upper sum is 2.87 and the lower sum is 2.28.

The double integral is indeed zero.

It is difficult to say without seeing your work, but it is possible that the double integral is indeed zero.

Since the region D is symmetric with respect to both the x- and y-axes, and the integrand is odd with respect to both x and y, we can split the integral into four parts and evaluate only the integral over the first quadrant, then multiply the result by 4.

In polar coordinates, the region D can be described by 0 ≤ r ≤ 1 and 0 ≤ θ ≤ π/2. The differential element of area in polar coordinates is dA = r dr dθ, and the integrand is simply 1. Thus, the double integral becomes:

∫∫D d xy dA = 4 ∫∫D d xy dA over the first quadrant

= 4 ∫∫(0 to 1) (0 to π/2) r cos θ sin θ dr dθ

= 4 [(∫(0 to π/2) cos θ dθ) (∫(0 to 1) r sin θ dr)]

= 4 [(sin(π/2) - sin(0)) (-(cos(0) - cos(π/2)))]

= 0

Therefore, the double integral is indeed zero.

To learn more about coordinates, visit:

https://brainly.com/question/16634867

#SPJ11

The mean of Y is approximately 665.14

Variance is approximately [tex]1.05 * 10^9.[/tex]

Standard deviation is approximately 32415.98.

The probability that Y is greater than 1000 is approximately 0.00013383.

The lognormal distribution is a continuous probability distribution of a random variable whose logarithm is normally distributed. The probability density function (PDF) of a lognormal distribution is given by:

f(y) = (1 / (yσ√(2π))) * [tex]e^{(-(ln(y)-\mu)}^2 / (2\sigma^2))[/tex]

where y > 0, μ is the mean of the logarithm of the random variable, σ is the standard deviation of the logarithm of the random variable, and ln(y) is the natural logarithm of y.

Given that Y has a lognormal distribution with parameters μ = 5 and σ = 1, we can compute its mean, variance and standard deviation as follows:

The mean of Y can be computed as:

E(Y) = [tex]e^{(\mu + \sigma^2/2)[/tex]

= [tex]e^{(5 + 1^2/2)[/tex]

= [tex]e^{6.5[/tex]

≈ 665.14

Therefore, the mean of Y is approximately 665.14.

The variance of Y can be computed as:

Var(Y) = [tex][e^{(\sigma^2)} - 1] * e^{(2\mu + \sigma^2)[/tex]

[tex]= [e^{(1)} - 1] * e^{(2*5 + 1)[/tex]

[tex]= [e - 1] * e^{11[/tex]

≈ [tex]1.05 * 10^9[/tex]

Therefore, the variance of Y is approximately [tex]1.05 * 10^9.[/tex]

The standard deviation of Y is the square root of its variance:

SD(Y) = [tex]\sqrt(Var(Y))[/tex]

[tex]= \sqrt(1.05 * 10^9)[/tex]

≈ 32415.98

Therefore, the standard deviation of Y is approximately 32415.98.

The PDF of Y can be plotted using the formula given above. Here is a sketch of the PDF of Y:

   ^

   |

   |

   |

   |

   |       . . . . . . . . . . . . . . . . . .

   |     .                                     .

   |   .                                         .

   | .                                             .

   |.                                                 .

   +---------------------------------------------------> y

The PDF has a peak at y = [tex]e^5[/tex], which is the mean of Y, and it is skewed to the right.

To compute P(Y > 1000), we can use the cumulative distribution function (CDF) of Y:

F(y) = P(Y ≤ y) = ∫[0, y] f(x) dx

where f(x) is the PDF of Y.

Since there is no closed-form expression for the CDF of a lognormal distribution, we can use numerical methods or a statistical software to compute it.

Using a software like R or Python, we can compute P(Y > 1000) as follows:

# In R:

1 - plnorm(1000, meanlog = 5, sdlog = 1)

# In Python:

from scipy.stats import lognorm

1 - lognorm.cdf(1000, s = 1, scale = exp(5))

The result is approximately 0.00013383.

Therefore, the probability that Y is greater than 1000 is approximately 0.00013383.

To know more about probability, refer to the link below:

https://brainly.com/question/16662176#

#SPJ11

The situation could be described by the expression d+1/2 is an option (C). Lela walked 1 mile yesterday, and d miles fewer today.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

d+1/2 is an abbreviation for "d plus one-half."

It describes a situation in which a quantity (represented by d) is increased by half.

For example, if Lela walked d miles yesterday and wants to walk another half mile today, she might use the term d+1/2 to indicate her total distance walked today.

Alternatively, if Lela wanted to walk half as far today as she did yesterday, the equation would not apply since the quantity being added or subtracted is a variable amount (d/2) rather than a fixed amount (one-half).

Hence, the situation could be described by the expression d+1/2 is option (C). Lela walked 1 mile yesterday and d miles fewer today.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ1

Rounded to the nearest cent, the monthly charge for 4000 kWh is $450.82.

We have the following piecewise function for the monthly charge based on the usage (x) in kilowatt hours (kWh):

For 0 ≤ x ≤ 500: C(x) = 7.52 + 0.1079x
For x > 500: C(x) = 19.22 + 0.1079x

Now, let's find the monthly charges for the given usages:

(a) 5 kWh
Since 0 ≤ 5 ≤ 500, we'll use the first equation:
C(5) = 7.52 + 0.1079(5)
C(5) = 7.52 + 0.5395
C(5) = 8.0595
Rounded to the nearest cent, the monthly charge for 5 kWh is $8.06.

(b) 13 kWh
Since 0 ≤ 13 ≤ 500, we'll use the first equation:
C(13) = 7.52 + 0.1079(13)
C(13) = 7.52 + 1.4027
C(13) = 8.9227
Rounded to the nearest cent, the monthly charge for 13 kWh is $8.92.

(c) 4000 kWh
Since 4000 > 500, we'll use the second equation:
C(4000) = 19.22 + 0.1079(4000)
C(4000) = 19.22 + 431.6
C(4000) = 450.82

Rounded to the nearest cent, the monthly charge for 4000 kWh is $450.82.

To know more about kilowatt hours (kWh), refer here:

https://brainly.com/question/30498337

#SPJ11

I don't agree , as represents a value of 2.

Algebra is a branch of mathematics that deals with mathematical operations and symbols to represent numbers and quantities. It is a broad area that covers a wide range of mathematical topics, including solving equations, manipulating mathematical expressions, and analyzing mathematical structures.

In algebra, the basic mathematical operations include addition, subtraction, multiplication, and division, which are used to perform computations on numerical values. Algebraic expressions often use variables such as x and y to represent unknown quantities, and equations are used to describe relationships between these variables.

Algebraic structures such as groups, rings, and fields are studied in abstract algebra, which is a more advanced area of algebra. These structures have applications in many areas of mathematics, as well as in computer science, physics, and engineering.

As we can see ,

3x  is equal to 6 × 1,

3x = 6

x=2≠3

We know that x represent  a value 2 not 3.

To know more about expressions visit:

https://brainly.com/question/29149747

#SPJ1

The complete question is:

Answer:

Angle 5 and 2 are vertical to each other.

Hope this helps : )

Step-by-step explanation:

Vertical angles are when angles are opposite of each other. So that makes angles 5 and 2 Vertical Angles.

The probability that at least one computer fails to solve the problem is approximately 0.431 or 43%, which is option (b).

The probability that a single computer solves the problem is 0.92. Therefore, the probability that a single computer fails to solve the problem is:

P(failure) = 1 - P(success) = 1 - 0.92 = 0.08

Since the computers are working independently, the probability that all ten computers solve the problem is:

P(all computers solve) = 0.92¹⁰= 0.569

The probability that at least one computer fails to solve the problem is the complement of the probability that all computers solve the problem:

P(at least one computer fails) = 1 - P(all computers solve) = 1 - 0.569 = 0.431

Therefore, the probability that at least one computer fails to solve the problem is approximately 0.431 or 43%, which is option (b).

Learn more about “ probability “ visit here;

https://brainly.com/question/30034780

#SPJ4

The equation for the surface obtained by rotating the line x = 9y about the x-axis is z² + 81y² = x².(1)

To find this equation, start with the given line x = 9y. Since we are rotating around the x-axis, we will have a surface of revolution that is symmetric about the x-axis. This means that the equation will only involve x, y, and z².

Rewrite the given line as y = (1/9)x. Next, square both sides of this equation to get y² = (1/81)x². Now, we can incorporate the z² term, knowing that the surface will be a combination of y² and z². Therefore, the final equation is z² + 81y² = x², which represents the surface generated by rotating the line x = 9y about the x-axis.(1)

To know more about x-axis click on below link:

https://brainly.com/question/24751711#

#SPJ11

The probability of being in state 3 at time n+3, given that the chain is currently in state 1 at time n, is 1/80.

a. To find the probability that the chain will be in state 2 at time n+2, given that it is currently in state 3 at time n, we need to look at the (3, 2) entry of the matrix P^2, which represents the probability of transitioning from state 3 to state 2 in two steps:

P^2 = P * P = [[1/4, 1/4, 0, 1/20], [1, 0, 0, 0], [1/2, 0, 1/2, 0], [1/4, 1/4, 1/4, 1/4]] * [[1/4, 1/4, 0, 1/20], [1, 0, 0, 0], [1/2, 0, 1/2, 0], [1/4, 1/4, 1/4, 1/4]]

P^2 = [[9/80, 7/80, 1/20, 3/40], [1/4, 1/4, 0, 1/4], [7/20, 1/20, 1/4, 1/10], [1/4, 1/4, 1/4, 1/4]]

So the probability of transitioning from state 3 to state 2 in two steps is 1/20. Therefore, the probability of being in state 2 at time n+2, given that the chain is currently in state 3 at time n, is 1/20.

b. To find the probability that the chain will be in state 3 at time n+3, given that it is currently in state 1 at time n, we need to look at the (1, 3) entry of the matrix P^3, which represents the probability of transitioning from state 1 to state 3 in three steps:

P^3 = P * P^2 = [[1/4, 1/4, 0, 1/20], [1, 0, 0, 0], [1/2, 0, 1/2, 0], [1/4, 1/4, 1/4, 1/4]] * [[9/80, 7/80, 1/20, 3/40], [1/4, 1/4, 0, 1/4], [7/20, 1/20, 1/4, 1/10], [1/4, 1/4, 1/4, 1/4]]

P^3 = [[29/320, 9/160, 1/80, 19/320], [5/16, 1/16, 1/16, 5/16], [41/160, 1/40, 19/80, 3/16], [29/160, 9/80, 9/80, 23/80]]

So the probability of transitioning from state 1 to state 3 in three steps is 1/80. Therefore, the probability of being in state 3 at time n+3, given that the chain is currently in state 1 at time n, is 1/80.

To learn more about probability visit:

https://brainly.com/question/30034780

#SPJ11

To transform each old salary x into a new salary n(x) with an across-the-board raise of r, we can use the following function: n(x) = x + r

In this case, since each teacher at C.F. Gauss Elementary School is given an across-the-board raise of r, we can use this function to calculate their new salaries. For example, if a teacher's old salary is x, their new salary would be:

n(x) = x + r

So if the across-the-board raise is 10%, or r = 0.1, then a teacher with an old salary of $50,000 would have a new salary of:

n($50,000) = $50,000 + 0.1($50,000) = $55,000

Similarly, a teacher with an old salary of $70,000 would have a new salary of:

n($70,000) = $70,000 + 0.1($70,000) = $77,000

And so on for each teacher at C.F. Gauss Elementary School.

Learn More About Function: https://brainly.com/question/2328150

#SPJ11

Answer:

Theoretical probability assumes that all outcomes are equally likely. When a replacement is involved, the probability of each outcome remains the same. Therefore, we cannot predict the exact number of outcomes that will occur, as each trial remains independent and the probability of each outcome remains the same.

Answer:

2.7

Step-by-step explanation:

1/5 = 0.5

4/5 = 0.8

So this is the equation:

4.5 - 1.8

Answer:

2.4

Step-by-step explanation:

4 1/5 - 1 4/5

Exact form: 12/5

Mixed number form: 2 2/5

Decimal form: 2.4

The volume of the cuboid to be approximately 1.8cm³.

In this case, we are given that the volume of the small cube is 1cm³. Therefore, using the formula, we can solve for the length of its side as follows:

1cm³ = s³

Taking the cube root of both sides: ∛(1cm³) = ∛(s³) 1cm = s

Hence, the length of the side of the small cube is 1cm.

Then, we can estimate the other two dimensions of the cuboid as follows:

   • The width (w) could be a little more than the length of the side of the small cube, say 1.2a.

   • The height (h) could also be a little more than the length of the side of the small cube, say 1.5a.

Therefore, using the formula for the volume of a cuboid, we can estimate the volume of the cuboid as follows:

V = lwh V = a × 1.2a × 1.5a V = 1.8a³

Substituting the value of 'a' as 1cm, we get:

V ≈ 1.8cm³

To know more about volume here

https://brainly.com/question/11168779

#SPJ1

Based on the provided tables, the correct answer is c. Guitarists were significantly less anxious than pianists and drummers, and drummers were significantly less anxious than pianists.

To reach this conclusion, follow these steps:
1. Look at the "Estimates" table, which provides the mean anxiety levels and 95% confidence intervals for each instrument group.
- Guitar: Mean anxiety = 72.633
- Piano: Mean anxiety = 85.852
- Drums: Mean anxiety = 98.225
2. Examine the "Pairwise Comparisons" table, which presents the mean differences in anxiety levels between the instrument groups and the significance levels (Sig.) after applying the Bonferroni correction for multiple comparisons.
- Guitar vs Piano: Mean difference = -13.219, Sig. = .008 (significant)
- Guitar vs Drums: Mean difference = -25.592, Sig. = .000 (significant)
- Piano vs Drums: Mean difference = -12.373, Sig. = .009 (significant)
3. Since all three pairwise comparisons are significant at the .05 level, it means that the anxiety levels among the groups are significantly different. Thus, guitarists have lower anxiety than pianists and drummers, and drummers have lower anxiety than pianists.

The tables show that there is a significant difference in anxiety levels among the different instruments. Drummers had the highest anxiety levels, followed by pianists, and guitarists had the lowest anxiety levels. The pairwise comparisons also show that the anxiety levels of guitarists were significantly lower than both drummers and pianists. Therefore, the answer is option b: Guitarists were significantly less anxious than drummers but were about as anxious as pianists, and drummers were about as anxious as pianists. The tables also provide information on the interval and difference in anxiety levels among the instruments.

Learn more about Mean difference here: brainly.com/question/15786413

#SPJ11

The area of a triangle with vertices (6, 6), (2, 4), and (0, 8) is 4√10 square units.

To find the area of a triangle with vertices (6, 6), (2, 4), and (0, 8), we can use the formula:

Area = 1/2 * base * height

First, we need to find the base and height of the triangle. We can use the distance formula to do this:

Base = distance between (6, 6) and (2, 4) = √[(6-2)^2 + (6-4)^2] = √20
Height = distance between (0, 8) and the line containing (6, 6) and (2, 4). To do this, we first find the equation of the line:

y - 6 = (6-4)/(6-2) * (x-6)
y - 6 = 1/2 * (x-6)
y = 1/2x + 3

Then we find the distance between point (0, 8) and the line y = 1/2x + 3:

Height = |1/2*0 - 1*8 + 3| / √(1^2 + 1/2^2) = 4√5/5

Now we can plug in the base and height into the formula:

Area = 1/2 * √20 * 4√5/5 = 4√10 square units

Therefore, the area of the triangle is 4√10 square units.

Know more about triangle here:

https://brainly.com/question/17335144

#SPJ11

Answer:

[tex](f + g)(x) = - x + 2[/tex]

Step-by-step explanation:

Answer:

Step-by-step explanation:

b. discrete quantitative data

b. discrete quantitative data

The number of tires on an automobile is an example of discrete quantitative data because it represents a countable and finite value. It is a quantitative measure as it involves numerical values (e.g., 4 tires, 6 tires, etc.) and it is discrete because it cannot take on fractional or continuous values. In this case, the number of tires is a discrete variable with distinct and separate values that can be counted and measured. It is not qualitative data as it does not involve descriptive or subjective characteristics, and it is not descriptive statistics as it does not involve summarizing or describing data. It is also not inferential statistics as it does not involve drawing conclusions from data relationships or making inferences about a larger population.

Using MUS for auditing the inventory account of Cusick Machine Tool Company, the required sample size is 156 and the sampling interval is $57,692. The auditor can use this information to select the sample and test the account accurately.

In this scenario, Jim Sigmund, a senior in charge of the audit, plans to use MUS (Monetary Unit Sampling) to audit Cusick Machine Tool Company's inventory account. The MUS is a statistical sampling method that uses monetary units as a basis for selecting a sample.

The sample size is determined by considering the tolerable misstatement, expected misstatement, and the risk of incorrect acceptance. To determine the required MUS sample size and sampling interval, we need to use Table 8-5. The tolerable misstatement is the maximum amount of error that the auditor is willing to accept without modifying the opinion.

In this case, it is $360,000. The expected misstatement is the auditor's estimate of the amount of misstatement in the account. Here, it is $90,000. The risk of incorrect acceptance is the auditor's assessment of the risk that the sample will not identify a misstatement that exceeds the tolerable misstatement. It is 5%.

Using Table 8-5, we can find the sample size and sampling interval based on these factors. The sample size is 156, and the sampling interval is $57,692. This means that every $57,692 in the inventory account is a sampling interval, and the auditor needs to select 156 monetary units for testing.

The calculation for the sampling interval is determined by dividing the recorded balance of the account by the sample size. In this case, the recorded balance is $9,000,000, and the sample size is 156. Thus, the sampling interval is $57,692 ($9,000,000 / 156).

In conclusion, using MUS for auditing the inventory account of Cusick Machine Tool Company, the required sample size is 156 and the sampling interval is $57,692. The auditor can use this information to select the sample and test the account accurately.

To know more about sample size refer here:

https://brainly.com/question/30885988#

#SPJ11

Complete Question:

McMullen and Mulligan, CPAs, were conducting the audit of Cusick Machine Tool Company for the year ended December 31. Jim Sigmund, senior-in-charge of the audit, plans to use MUS to audit Cusick's inventory account. The balance at December 31 was $9,000,000.

Based on the following information, compute the required MUS sample size and sampling interval using Table 8-5: (Use the tables, Enot IDEA, to solve for these problems. Round your interval answer to the nearest whole number.)

Tolerable misstatement = $360,000

Expected misstatement = $90,000

Risk of incorrect acceptance = 5%

Table 8-5:

Sample Size- 156

Sampling Interval - $57,692

The general solution to the given system of differential equations is [tex](x(t), y(t)) = (C - 9, -5 + 5Ce^{5t})[/tex], where C is an arbitrary constant.

To find the general solution of the given system of differential equations:

dx/dt = 9x - y

dy/dt = 5x + 5y

Solve these equations simultaneously.

Step 1: Solve the first equation, dx/dt = 9x - y.

To do this,  rearrange the equation as follows:

dx/dt + y = 9x

This is a first-order linear ordinary differential equation. Solve it using an integrating factor. The integrating factor is given by [tex]e^{\int1 \,dt}= e^t[/tex].

Multiply both sides of the equation by [tex]e^t[/tex]:

[tex]e^{t}dx/dt + e^t y = 9x e^t[/tex]

Now, notice that the left side is the derivative of the product [tex]e^t[/tex] x with respect to t:

d/dt [tex](e^t x)[/tex] = 9x [tex]e^t[/tex]

Integrating both sides with respect to t:

[tex]\int{d/dt (e^t x)}\, dt = \int{9x e^t}\, dt[/tex]

[tex]e^t x = 9 \int{x e^t}\, dt[/tex]

integrating by parts.

[tex]e^t x = 9 (x e^t - \int{ e^t}\, dx[/tex]

[tex]e^t x = 9x e^t - 9 \int{e^t}\, dx[/tex]

[tex]e^t x + 9 \int{ e^t}\, dx = 9x e^t[/tex]

[tex]e^t x + 9 e^t = C e^t[/tex]  (where C is the constant of integration)

[tex]x + 9 = C[/tex]

[tex]x = C - 9[/tex]

Step 2: Solve the second equation,[tex]dy/dt = 5x + 5y[/tex].

This equation is separable. Rearrange it as:

[tex]dy/dt - 5y = 5x[/tex]

Multiply both sides by [tex]e^{(-5t)}[/tex]:[tex]e^{-5t} dy/dt - 5e^{-5t} y = 5x e^{-5t}[/tex]

Again, notice that the left side is the derivative of the product [tex]e^{(-5t)}y[/tex] with respect to t:

[tex]d/dt (e^{(-5t)} y)= 5x e^{-5t}[/tex]

Integrating both sides with respect to t:

[tex]\int{ d/dt (e^{(-5t)} y) dt = ∫ 5x e^{(-5t)} dt[/tex]

[tex]e^{(-5t)} y = 5 \intx e^{(-5t)} \,dt[/tex]

Adding zero for symmetry

[tex]e^{-5t} y = 5 (\int x e^{-5t} \,dt + \int 0\, dt)[/tex]

[tex]e^{-5t} y = 5 (\int x e^{-5t}\, dt + C)[/tex]

[tex]e^{-5t} y = 5 (\int x e^{-5t}\, dt) + 5C[/tex]

Using substitution: u = -5t, du = -5dt

[tex]e^{-5t} y = 5 (-\int e^{-5t} \,dx) + 5C[/tex]

[tex]e^{-5t} y = -5 \int e^u \,dx + 5C[/tex]

[tex]e^{-5t} y = -5e^u + 5C[/tex]

[tex]e^{-5t} y = -5e^{-5t} + 5C[/tex]

[tex]y = -5 + 5Ce^{5t}[/tex]

Combining the results from Step 1 and Step 2, we have:

[tex]x(t) = C - 9[/tex]

[tex]y(t) = -5 + 5Ce^{5t}[/tex]

Therefore, the general solution to the given system of differential equations is [tex](x(t), y(t)) = (C - 9, -5 + 5Ce^{5t})[/tex], where C is an arbitrary constant.

Learn more about systems of differential equations and their solutions here:

https://brainly.com/question/31963778

#SPJ12

The first principal component is the line passing through the points (-2,-2) and (2,2).

(a) To find the first principal component, we need to find the eigenvector of the covariance matrix that corresponds to the largest eigenvalue. First, we calculate the covariance matrix:

| 4 0 -4 |

| 0 0 0 |

|-4 0 4 |

The eigenvalues of this matrix are 8, 0, and 0. The eigenvector corresponding to the largest eigenvalue (8) is:

| 1 |

| 0 |

|-1 |

So, the first principal component is the line passing through the points (-2,-2) and (2,2).

To know more about  first principal component  refer here:

https://brainly.com/question/30611595

#SPJ11

y = 1 ± 9 sqrt(1 - (x/9)^2)

This is the equation of the curve in terms of x and y.

(x - 0)^2 + (y - 1)^2 = 9^2

This is the equation of a circle centered at (0, 1) with radius 9.

a. To eliminate the parameter t, we can use the trigonometric identity cos^2(t) + sin^2(t) = 1 to solve for cos(t) in terms of sin(t):

cos^2(t) = 1 - sin^2(t)
cos(t) = ±sqrt(1 - sin^2(t))

Since the x-coordinate of the curve is given by x = 9 cos(t), we can substitute the expression for cos(t) and obtain:

x = ±9 sqrt(1 - sin^2(t))

Squaring both sides and simplifying, we get:

x^2 + 9^2 sin^2(t) = 81

Solving for sin(t) and substituting into the expression for y, we obtain:

y = 1 ± 9 sqrt(1 - (x/9)^2)

This is the equation of the curve in terms of x and y.

b. The curve is a circle centered at (0, 1) with radius 9. The positive orientation is counterclockwise around the circle. The starting point is (9, 1) and the ending point is (-9, 1).

To see this, we can rewrite the equation of the curve in standard form:

(x - 0)^2 + (y - 1)^2 = 9^2

This is the equation of a circle centered at (0, 1) with radius 9. The positive orientation is counterclockwise around the circle because the parameter t increases in a counterclockwise direction. The starting point occurs when t = 0, which corresponds to x = 9 and y = 1, and the ending point occurs when t = pi, which corresponds to x = -9 and y = 1.

Visit to know more about Equation:-

brainly.com/question/22688504

#SPJ11

If y=9x^2, then the polar form of y=9x^2 in the form of r is a function of θ is r = 9cos^2(θ)/sin(θ).

Explanation:

To convert y=9x^2 to polar coordinates, follow these steps:

Step 1: we first need to substitute x=rcos(θ) and y=rsin(θ).

Substituting these values in y=9x^2, we get:

rsin(θ) = 9(rcos(θ))^2

Simplifying the equation, we get:

rsin(θ) = 9r^2cos^2(θ)

Step 2: Dividing both sides by r and simplifying, we get:

r = 9cos^2(θ)/sin(θ)

Therefore, the polar form of y=9x^2 in the form of r is a function of θ is:

r = 9cos^2(θ)/sin(θ)

Know more about the polar coordinates click here:

https://brainly.com/question/14436205

#SPJ11

Computing the sine and cosine of 330∘ by using the reference angle.

a) Reference angle: 30 degrees

b) Quadrant: 4

c) sin(330°) = -1/2

d) cos(330°) = sqrt(3)/2

a) To find the reference angle, subtract the given angle (330°) from 360°, as it is in the fourth quadrant. So the reference angle is 360° - 330° = 30°.

b) Since 330° lies between 270° and 360°, it is in the fourth quadrant (answer 4).

c) To find sin(330°), use the reference angle of 30°. Since the fourth quadrant has a positive x-value and a negative y-value, the sine will be negative. So, sin(330°) = -sin(30°) = -1/2.

d) To find cos(330°), use the reference angle of 30°. Since the fourth quadrant has a positive x-value, the cosine will be positive. So, cos(330°) = cos(30°) = sqrt(3)/2.

Your answer:

a) Reference angle: 30 degrees

b) Quadrant: 4

c) sin(330°) = -1/2

d) cos(330°) = sqrt(3)/2

To know more about reference angle, refer here:

brainly.com/question/1603873

#SPJ11

The Volume of composed figure = 171 cubic unit

The Volume of composed figure = 228 cubic unit

1. Volume of horizontal cuboid

= l w h

= 13  x 3 x 3

= 117 cubic unit

Volume of two vertical cuboid

= 2 ( l w h)

= 2 (6 x 3 x 1.5)

= 54 cubic unit

So, the Volume of composed figure

= 117 + 54

= 171 cubic unit

2. Volume of Big cuboid

= l w h

= 10 x 7 x 3

= 210 cubic unit

and, Volume of Small Cube

= l w h

= 3 x 2 x 3

= 18 cubic unit

So, the Volume of composed figure

= 210 + 18

= 228 cubic unit

Learn more about Volume here:

https://brainly.com/question/1578538

#SPJ1

The closest number in the sequence to 300 is 310

Sequence is an ordered list of things or other mathematical objects that follow a particular pattern or rule.

How to determine this

When the first term = 30

The common difference = 40

Following the order to get the number closest to 300

When 150 is added to 40 i.e 150 +40 = 190

190 + 40 = 230

230 + 40 = 270

270 + 40 = 310

Therefore, the number closest to 300 is 310

Read more about Sequence

https://brainly.com/question/26755466

#SPJ1

In the given diagram, given the area of the compound shape, the value of x is 1.5 mm

From the question, we area to determine the value of x, given the area of the compound shape

From the given information,

The area of the compound shape = 24 mm²

From the given diagram, we can write that

Area of the compound shape = (7 × x) + [x × (2x + 6)]

Thus,

24 = (7 × x) + [x × (2x + 6)]

24 = 7x + (2x² + 6x)

24 = 7x + 2x² + 6x

24 = 2x² + 13x

2x² + 13x - 24 = 0

2x² + 16x - 3x - 24 =0

2x(x + 8) - 3(x + 8) = 0

(2x - 3)(x + 8) = 0

2x - 3 = 0 OR x + 8 = 0

2x = 3 OR x = -8

x = 3/2 OR x = -8

Since, measurement cannot be negative

x = 3/2 mm

x = 1.5 mm

Hence, the value of x is 1.5 mm

Learn more on Calculating the value of x here: https://brainly.com/question/10254615

#SPJ1