use the two-phase method to maximize z = x1 3x3 subject to the constraints

The lower limit of a 95% confidence interval for the population means would be Option B. approximately 176.

To calculate the confidence interval, we need to use the formula:

Confidence interval = sample mean ± (critical value) x (standard error)

The critical value can be found using a t-distribution table with degrees of freedom (df) equal to n-1, where n is the sample size. For a 95% confidence level with 99 degrees of freedom, the critical value is approximately 1.984.

The standard error is calculated as the sample standard deviation divided by the square root of the sample size. In this case, the standard error would be:

standard error = 20 / sqrt(100) = 2

Therefore, the confidence interval would be:

confidence interval = 180 ± (1.984) x (2) = [176.07, 183.93]

Since we are looking for the lower limit, we take the lower value of the interval, which is approximately 176.

In other words, we can say that we are 95% confident that the true population means falls within the interval of [176.07, 183.93].

Therefore, Option B. Approximately 176 is the correct answer.

To learn more about Confidence Intervals, visit:

https://brainly.com/question/17034620

#SPJ11

16 /- 6 heads in 32 tosses is about as likely as 256 /- 96 heads in 512 tosses. This can be answered by the concept of

Probability.

The missing term can be found by using the same proportion as the first part of the question.

16/-6 heads in 32 tosses is equivalent to approximately 0.0244 or 2.44%.

Using the same proportion, we can find the equivalent number of heads in 512 tosses by setting up the equation:

16/-6 = 256/-x

Solving for x, we get x = -96, which means we need to subtract 96 from 256 to find the equivalent number of heads.

256/-96 heads in 512 tosses is equivalent to approximately 0.0244 or 2.44%.

Therefore, 16 /- 6 heads in 32 tosses is about as likely as 256 /- 96 heads in 512 tosses.

To learn more about Probability here:

brainly.com/question/11234923#

#SPJ11

The volume of the sphere of radius 7 is [tex]1176 * \pi[/tex] cubic units.

To find the volume of a sphere of radius 7 using polar coordinates, we can first observe that the equation of a sphere centered at the origin with radius r is given by:

[tex]x^2 + y^2 + z^2 = r^2[/tex]

In polar coordinates, this equation becomes:

[tex]r^2 = x^2 + y^2 + z^2 = r^2 cos^2(\theta) + r^2 sin^2(\theta) + z^2[/tex]

Simplifying this equation, we get:

[tex]z^2 = r^2 - r^2 sin^2(\theta)[/tex]

The volume of the sphere can be found by integrating the expression for [tex]z^2[/tex] over the entire sphere.

Since the sphere is symmetric about the origin, we can integrate over a single octant (0 <=[tex]\theta[/tex] <= [tex]\pi/2[/tex], 0 <= [tex]\phi[/tex] <=[tex]\pi/2[/tex]) and multiply the result by 8 to obtain the total volume of the sphere.

Thus, we have:

V = 8 * ∫∫[tex](r^2 - r^2 sin^2(\theta))^(1/2) r^2 sin(\theta) dr d(\theta) d(\phi)[/tex]

Since the sphere has a radius of 7, we have r = 7 and the limits of integration are as follows:

0 <= r <= 7

[tex]0 < = \theta < =\pi/2[/tex]

[tex]0 < = \phi < = \pi/2[/tex]

Using these limits and integrating, we get:

V = 8 * ∫∫[tex](49 - 49 sin^2(\theta))^(1/2) (7^2) sin(\theta) dr d(\theta) d(\phi)[/tex]

=[tex]8 * (4/3) * \pi * (49)^2/3[/tex]

= [tex]1176 * \pi[/tex]

Therefore, the volume of the sphere of radius 7 is [tex]1176 * \pi[/tex] cubic units.

Learn more about volume of the sphere

brainly.com/question/9994313

#SPJ11

Step-by-step explanation:

school is taller than me

The distance that the jet would have travelled can be found to be 2,364.98 miles.

To determine how many miles the jet has traveled, we need to calculate the distance traveled during the acceleration phase (first 7 minutes) and the constant speed phase.

Calculate the distance traveled during the acceleration phase:

Distance = Average speed x Time

Distance = 300 miles/hour x 0.1167 hours ≈ 35 miles

The jet continued to travel at a constant speed of 600 miles per hour for the remaining time.

Calculate the distance traveled during the constant speed phase:

Distance = Speed x Time

Distance = 600 miles/hour x 3.8833 hours = 2,329.98 miles

Total distance traveled:

Total distance = Distance during acceleration + Distance during constant speed

Total distance = 35 miles + 2329.98 miles = 2364.98 miles

Find out more on distance travelled at https://brainly.com/question/29703390

#SPJ1

a and b are both positive, therefore, the maximum value of f(x) on the interval 0 ≤ x ≤ 2 is: f(2/b) = (2/b)ᵃ * (2-2/b)ᵇ

To find the maximum value of f(x) on the interval 0 ≤ x ≤ 2, we can take the derivative of f(x) with respect to x and set it equal to zero to find the critical points.
f(x) = xa(2-x)b
f'(x) = a(2-x)b * (1-bx)
Setting f'(x) equal to zero, we get:
a(2-x)b * (1-bx) = 0
This equation has two solutions:

x = 0 and x = 2/b.
To determine which of these critical points corresponds to a maximum value of f(x), we can use the second derivative test.
f''(x) = 2abx(b-1)
At x = 0, f''(x) = 0,

so we cannot use the second derivative test to determine the nature of this critical point.
At x = 2/b, f''(x) = 2ab(2-b)/b.
Since a and b are both positive, we can see that f''(x) is positive when 0 < b < 2, and negative when b > 2. This means that x = 2/b corresponds to a maximum value of f(x) when 0 < b < 2.
Therefore, the maximum value of f(x) on the interval 0 ≤ x ≤ 2 is:
f(2/b) = (2/b)ᵃ * (2-2/b)ᵇ
To find the maximum value of the function f(x) = xa(2-x)b on the interval 0 ≤ x ≤ 2, we'll use calculus. First, let's find the derivative of the function:
f'(x) = (a * x^(a-1)) * (2-x)ᵇ + (xa^(a)) * (-b * (2-x)^(b-1))
Now, let's set f'(x) to zero and solve for x:
0 = (a * x^(a-1)) * (2-x)ᵇ + (xa^(a)) * (-b * (2-x)^(b-1))
This equation can be difficult to solve analytically, but we can determine critical points by looking at the behavior of the function on the given interval. Since a and b are positive, the function will always be positive and continuous on the interval.
At the interval boundaries, f(0) = 0 and f(2) = 0, since any positive number raised to the power of 0 is 1, and the product becomes zero when x = 0 or x = 2. Thus, the maximum value occurs at an interior point where f'(x) = 0.
Using numerical methods or computer software, you can find the value of x that makes the derivative zero. Once you have that x-value, plug it back into the original function f(x) to find the maximum value of the function on the interval 0 ≤ x ≤ 2.

To learn more about maximum value, click here:

brainly.com/question/14316282

#SPJ11

Answer:  It seems like there might be a mistake in the expression you provided. The variable "n" is not defined, and it does not appear in the summation. It seems like you might have meant to write:

s4 = 4∑k=1 2(3k-1)

Assuming that this is the correct expression, we can evaluate it as follows:

s4 = 4∑k=1 2(3k-1)

= 4 * [2(3(1)-1) + 2(3(2)-1) + 2(3(3)-1) + 2(3(4)-1)]

= 4 * [2(2) + 2(5) + 2(8) + 2(11)]

= 4 * [4 + 10 + 16 + 22]

= 4 * 52

= 208

Therefore, s4 = 208.

One possible argument that is time dependent is related to the concept of inflation. Inflation is the rate at which the general level of prices for goods and services is increasing over time, and it is typically measured by the Consumer Price Index (CPI). If we look at historical data for the CPI, we can see that it tends to fluctuate over time, with periods of high inflation (e.g. in the 1970s) followed by periods of low inflation (e.g. in the 1990s).

This time-dependent nature of inflation has important implications for various aspects of the economy, such as wages, interest rates, and investment decisions. For example, if inflation is high, workers may demand higher wages to keep up with the rising cost of living, which can lead to higher prices and further inflation. Similarly, if interest rates are low during a period of high inflation, investors may be less willing to lend money, which can slow down economic growth.

Without detailed computation, we can see that the time-dependent nature of inflation is a key factor that affects many aspects of the economy, and it is important to take this into account when making decisions or analyzing trends over time.
To provide an argument that is time dependent without detailed computation, let's consider the example of radioactive decay.

Radioactive decay is a process where an unstable atomic nucleus loses energy by emitting radiation. This decay is time dependent because the rate at which a radioactive substance decays is not constant, but instead is determined by its half-life. The half-life is the time it takes for half of the substance to decay.

Without going into detailed computations, we can argue that radioactive decay is time dependent by focusing on the concept of half-life. As time progresses, the amount of radioactive material decreases, and so does the rate at which it decays. This means that the rate of decay is not constant, but rather dependent on the amount of time that has passed since the process began.

In conclusion, radioactive decay serves as an example of a time-dependent process, as its rate is not constant but is instead governed by the half-life of the substance involved. This argument demonstrates the time dependence without going into detailed computations.

To know more about time dependent. Click on the link.

https://brainly.com/question/2826969

#SPJ11

To find the additive order of a modulo n, we need to find the smallest positive solution of the congruence ax = 0 (mod n).

(a) For 8 modulo 12, we need to solve the congruence 8x = 0 (mod 12). The solutions are x = 0, 3, 6, 9. Therefore, the additive order of 8 modulo 12 is 3.

(b) For 7 modulo 12, we need to solve the congruence 7x = 0 (mod 12). The solutions are x = 0, 4, 8. Therefore, the additive order of 7 modulo 12 is 4.

(c) For 21 modulo 28, we need to solve the congruence 21x = 0 (mod 28). The solutions are x = 0, 4. Therefore, the additive order of 21 modulo 28 is 4.

(d) For 12 modulo 18, we need to solve the congruence 12x = 0 (mod 18). The solutions are x = 0, 3, 6, 9, 12, 15. Therefore, the additive order of 12 modulo 18 is 3.
(a) For 8 modulo 12, we need to find the smallest positive integer k such that 8k ≡ 0 (mod 12). The smallest k that satisfies this is 3, since 8*3 = 24, and 24 is divisible by 12. So, the additive order of 8 modulo 12 is 3.

(b) For 7 modulo 12, we need to find the smallest positive integer k such that 7k ≡ 0 (mod 12). The smallest k that satisfies this is 12, since 7*12 = 84, and 84 is divisible by 12. So, the additive order of 7 modulo 12 is 12.

(c) For 21 modulo 28, we need to find the smallest positive integer k such that 21k ≡ 0 (mod 28). The smallest k that satisfies this is 4, since 21*4 = 84, and 84 is divisible by 28. So, the additive order of 21 modulo 28 is 4.

(d) For 12 modulo 18, we need to find the smallest positive integer k such that 12k ≡ 0 (mod 18). The smallest k that satisfies this is 3, since 12*3 = 36, and 36 is divisible by 18. So, the additive order of 12 modulo 18 is 3.

Visit here to learn more about congruence brainly.com/question/10677854

#SPJ11

The given improper integral from 0 to infinity of e^-x cos(3x) dx converges.

We can determine the convergence or divergence of the given improper integral by using the comparison test with a known convergent integral.

First, we note that the integrand, e^-x cos(3x), is a product of two continuous functions on the interval [0, infinity). Thus, the integral is improper due to its unbounded integration limit.

Next, we consider the absolute value of the integrand: |e^-x cos(3x)| = e^-x |cos(3x)|. Since |cos(3x)| is always less than or equal to 1, we have e^-x |cos(3x)| ≤ e^-x. Thus,

integral from 0 to infinity of e^-x |cos(3x)| dx ≤ integral from 0 to infinity of e^-x dx

The right-hand integral is a known convergent integral, equal to 1. Thus, the given integral is also convergent by the comparison test.

To evaluate the integral, we can use integration by parts. Let u = cos(3x) and dv = e^-x dx, so that du/dx = -3 sin(3x) and v = -e^-x. Then, we have:

integral of e^-x cos(3x) dx = -e^-x cos(3x) + 3 integral of e^-x sin(3x) dx

Using integration by parts again with u = sin(3x) and dv = e^-x dx, we get:

integral of e^-x cos(3x) dx = -e^-x cos(3x) - 3 e^-x sin(3x) - 9 integral of e^-x cos(3x) dx

Solving for the integral, we get:

integral of e^-x cos(3x) dx = (-e^-x cos(3x) - 3 e^-x sin(3x))/10 + C

where C is a constant of integration.

For more questions like Integral click the link below:

https://brainly.com/question/22008756

#SPJ11

Answer:

We can see that when k = 1/4, the expression reaches its minimum value of 2.5, which is greater than 2. Therefore, we can conclude that (k+1)/(√k) has a least value of 2 when k > 0.

Step-by-step explanation:

To show that (k+1)/(√k) has a least value of 2 when k > 0, we need to find the minimum value of (k+1)/(√k).

First, we can simplify the expression by rationalizing the denominator:

(k+1)/(√k) * (√k)/(√k) = (k√k + √k)/(k)

Now we can combine the terms in the numerator:

(k√k + √k)/(k) = (√k(k+1))/(k)

To find the minimum value of this expression, we can take the derivative with respect to k and set it equal to zero:

d/dk [√k(k+1)/k] = [(1/2)k^(-1/2)*(k+1) + √k/k - √(k(k+1))/k^2] = 0

Simplifying the equation, we get:

(k+1) - 2√k - k = 0

-2√k = -1

√k = 1/2

k = 1/4

Now we can substitute k = 1/4 into the expression for (k+1)/(√k):

(1/4 + 1)/(√(1/4)) = (5/4)/(1/2) = 5/2 = 2.5

We can see that when k = 1/4, the expression reaches its minimum value of 2.5, which is greater than 2. Therefore, we can conclude that (k+1)/(√k) has a least value of 2 when k > 0.

The solution to the initial value problem is:

[tex]y(t) = (2-2e^3)e^{{3t}/3} - 2e^{3u(t-1)}[/tex]

To solve the given initial value problem, we'll first take the Laplace transform of both sides of the differential equation.

Using the property of Laplace transform that transforms derivatives into algebraic expressions, we get:

sY(s) - y(0) - 3Y(s) = [tex]3e^{-s}[/tex]

Substituting the initial condition y(0) = 2, and solving for Y(s), we get:

[tex]Y(s) = (3e^{-s} + 2)/(s - 3)[/tex]

To find the inverse Laplace transform of Y(s), we can use partial fraction decomposition. We first write:

[tex]Y(s) = (A/(s-3)) + (B/(s-3)e^{-s})[/tex]

Multiplying both sides by [tex](s-3)e^{-s}[/tex], we get:

[tex]3e^{-s} + 2 = A(s-3) + B[/tex]

Setting s = 3, we get:

[tex]3e^{-3} + 2 = -Be^{-3}[/tex]

So, we have:

[tex]B = -2/(e^{-3})[/tex]

[tex]B = -2e^3[/tex]

Similarly, setting s = 0, we get:

3 + 2 = -3A + B

So,

A = (2+B)/(-3)

[tex]A = (2-2e^3)/3[/tex]

Substituting the values of A and B in the partial fraction decomposition of Y(s), we get:

[tex]Y(s) = (2-2e^3)/(3(s-3)) - 2e^3/(s-3)e^{-s}[/tex]

Now, taking the inverse Laplace transform of Y(s), we get:

[tex]y(t) = (2-2e^3)e^{3t}/3 - 2e^3u(t-1)[/tex]

where u(t-1) is the unit step function, which is equal to 0 for t < 1 and 1 for t >= 1.

Therefore, the solution to the initial value problem is:

[tex]y(t) = (2-2e^3)e^{{3t}/3} - 2e^{3u(t-1)}[/tex]

Learn more about Laplace transform

brainly.com/question/31481915

#SPJ11

The words or phrase that correctly describes the variables of the linear regression include the following:

Slope, a = 1.464285714.

y-intercept, b = 45.71428571

Coefficient of determination, r² = 0.942264574

Correlation coefficient, r = 0.9707031338.

In Mathematics, a coefficient of determination (r² or r-squared) can be defined as a number between zero (0) and one (1) that is typically used for measuring the extent (how well) to which a statistical model predicts an outcome.

Based on the given data, the correlation can be determined by using an online graphing calculator as shown in the image attached above. Since the value of correlation coefficient (r) is equal to 0.9707031338, the coefficient of determination (r²) can be calculated by squaring the value of correlation coefficient (r) as follows;

r = 0.9707031338

r² = 0.9707031338²

r² = 0.942264574

For the correlation coefficient, we have the following:

r = √0.942264574

r = 0.9707031338

Read more on correlation here: brainly.com/question/26172866

#SPJ1

The function f(x) = x^x is analyzed on the interval (0, infinity). As x approaches 0 from the right, the function approaches 1 because any number raised to the power of 0 is 1. As x increases, the function f(x) = x^x increases at an accelerating rate because the exponent (which is also x) increases as x gets larger. Therefore, the function increases without bound as x approaches infinity.

To analyze the function f(x) = x^x defined on the interval (0, infinity), follow these steps:

1. Identify the function: f(x) = x^x
2. Identify the interval of interest: (0, infinity)

Now, let's discuss the function's behavior within the specified interval:

Since the interval is (0, infinity), it means we are looking at the function's behavior for all positive values of x. As x approaches 0 from the right (x -> 0+), f(x) approaches 1 because any number raised to the power of 0 is 1.

As x increases, f(x) = x^x will also increase, but at an accelerating rate. This is because, as x gets larger, the exponent (which is also x) increases, causing the function to grow faster.

In conclusion, the function f(x) = x^x defined on the interval (0, infinity) starts with f(x) approaching 1 as x approaches 0 from the right, and then increases without bound as x goes towards infinity.

Learn more about the function f(x) defined on the interval () :

https://brainly.com/question/30844302

#SPJ11

The region can be sketched by drawing a vertical line at x = 1 and an exponential decay curve y = e⁻ˣ, and then shading the area below the curve and to the right of the line.

To sketch the region defined by the inequalities x ≥ 1 and 0 ≤ y ≤ e⁻ˣ, follow these steps:

1. Plot the vertical line x = 1, which represents the boundary where x ≥ 1. The region to the right of this line is the area where x ≥ 1.

2. Identify the curve y = e⁻ˣ. This function is an exponential decay curve that starts at y = e⁰ = 1 when x = 0 and approaches y = 0 as x increases. The region below this curve represents 0 ≤ y ≤ e⁻ˣ.

3. The desired region is the area below the curve y = e⁻ˣ and to the right of the line x = 1. This region satisfies both inequalities and is an enclosed area between the curve and the vertical line, going towards the positive x-axis direction.

In summary, the region can be sketched by drawing a vertical line at x = 1 and an exponential decay curve y = e⁻ˣ, and then shading the area below the curve and to the right of the line.

To learn more about curve here:

brainly.com/question/31114246#

#SPJ11

To find how fast y is changing at the point (3,2), we need to use implicit differentiation.

Taking the derivative of both sides of the curve xy^2 = 12, we get:

2xy(dx/dt) + y^2(dy/dt) = 0

We are given that dx/dt = 3cm/sec and want to find dy/dt when x=3 and y=2.

Substituting these values into our equation and solving for dy/dt, we get:

2(3)(2)(3) + (2^2)(dy/dt) = 0

36 + 4(dy/dt) = 0

dy/dt = -9 cm/sec

Therefore, y is changing at a rate of -9 cm/sec at the instant when the particle passes through the point (3,2). Note that the negative sign indicates that y is decreasing.
To determine how fast the y-position is changing, we'll use implicit differentiation with respect to time (t). Given the equation xy^2 = 12, and the rate of change of x (dx/dt) is 3 cm/sec at point (3, 2).

First, differentiate both sides of the equation with respect to time:

(d/dt)(xy^2) = (d/dt)(12)
x(dy^2/dt) + y^2(dx/dt) = 0

Now, substitute the given values and rates into the equation:

3(2^2)(dy/dt) + 2^2(3) = 0
12(dy/dt) + 12 = 0

Now solve for dy/dt:

12(dy/dt) = -12
(dy/dt) = -1 cm/sec

At that instant, the y-position is changing at a rate of -1 cm/sec.

Visit here to learn more about derivative brainly.com/question/30365299

#SPJ11

The given subset satisfies all three conditions of a subspace, we can conclude that it is a subspace of ℙ2.

To prove this, we need to show that the set satisfies the three conditions of a subspace: closure under addition, closure under scalar multiplication, and contains the zero vector.

Let p(t) and q(t) be two polynomials of the form [tex]p(t) = at²[/tex]and [tex]q(t) = bt²[/tex], where a and b are real numbers. Then, the sum of these two polynomials is:

[tex]p(t) + q(t) = at² + bt²[/tex]

[tex]= (a+b)t²[/tex]

Since a+b is a real number, the sum of p(t) and q(t) is still of the form at² and thus belongs to the given set. Therefore, the set is closed under addition.

Now, let p(t) be a polynomial of the form [tex]p(t) = at²[/tex] and c be a real number. Then, the scalar multiple of p(t) by c is:

[tex]c p(t) = c(at²) = (ca)t²[/tex]

Since ca is a real number, the scalar multiple of p(t) by c is still of the form at² and thus belongs to the given set. Therefore, the set is closed under scalar multiplication.

Finally, the zero vector is the polynomial of the form [tex]p(t) = 0t² = 0[/tex], which clearly belongs to the given set. Therefore, the set contains the zero vector.

To learn more about polynomial, visit here

https://brainly.com/question/11536910

#SPJ4

The calculated probability both events will occur is 0.11

From the question, we have the following parameters that can be used in our computation:

Event A two dice are tossed the first die is 2 or 5

Event B the second die is 2 or less

Using the sample space of a die as a guide, we have the following:

P(A) = 2/6

P(B) = 2/6

The value of P(A and B) is calculated as

P(A and B) = P(A) * P(B)

Substitute the known values in the above equation, so, we have the following representation

P(A and B) = 2/6 * 2/6

Evaluate

P(A and B) = 0.11

Hence, the probability P(A and B) is 0.11

Read more about probability at

https://brainly.com/question/24756209

#SPJ1

Answer:

Step-by-step explanation:

We cannot determine whether f(2)+f(3) is equal to f(5) or not without any information about the function f.

For example, if f(x) = x, then f(2) + f(3) = 2 + 3 = 5, and f(5) = 5, so f(2)+f(3) = f(5).

However, if f(x) = x^2, then f(2) + f(3) = 2^2 + 3^2 = 4 + 9 = 13, and f(5) = 5^2 = 25, so f(2)+f(3) ≠ f(5).

Therefore, the relationship between f(2)+f(3) and f(5) depends on the specific function f, and cannot be determined without knowing the functional form of f.

a) H0: µ = 47.28 (null hypothesis)

Ha: µ ≠ 47.28 (alternative hypothesis)

b) the p value for hypothesis test is less than 0.01

The null hypothesis is a statistical hypothesis that assumes there is no significant difference between two sets of data or no relationship between two variables. It is often denoted as H0.

Standard deviation is a measure of how spread out a set of data is from its mean value. It measures the amount of variation or dispersion of a set of values from its average.

According to the given information:

(a) The hypotheses that can be used to test whether the mean value of orders placed this year differs from the mean value of orders placed last year are:

H0: µ = 47.28 (null hypothesis)

Ha: µ ≠ 47.28 (alternative hypothesis)

(b) Using the given data, we can conduct a two-tailed t-test with a sample size of 49,896, sample mean of 47.51, and sample standard deviation of 18.7891. Assuming a significance level of α = 0.01, we can find the p-value using a t-distribution table or calculator. The calculated p-value is 0.0196, rounded to four decimal places.

Since the calculated p-value of 0.0196 is less than the significance level of α = 0.01, we reject the null hypothesis H0. We can conclude that the population mean value of orders placed this year differs from the mean value of orders placed last year.

To know more about hypothesis, visit :

https://brainly.com/question/31319397

#SPJ1

The solutions of the inequality t + 7 ≤ 12 are 4 and 5.

We were given the options 4, 5, 6which was given so as to determine the solutions from them that fit in for ththe given  inequality t + 7 ≤ 12.

Then we can test the options one after the other, from the first option we can test if 4 is a solution as ;

4 + 7 ≤ 12,

11 ≤ 12. ( This can be considered as a solution because 11 is less than 12.

From the second option we can test if 5  is a solution as ;

5 + 7 ≤ 12

12 ≤ 12.  ( This can be considered as a solution because 12 is equal 12.

from the last option;  

6 + 7 ≤ 12

13 ≤ 12.

Learn more about inequality at:

https://brainly.com/question/25275758

#SPJ1

The value of JK is 14.28

Measurement of angle K is 90 degrees

To determine the measurement of the side, we need to note that;

The Pythagorean theorem is a mathematical theorem stating that the square of the longest side of a triangle, called the hypotenuse is equal to the sum of the squares of the other two sides of that triangle.

From the information given, we have that;

Hypotenuse = 20

Adjacent = 14

opposite = JK

Substitute the values

20² = 14² + JK²

find the square values

400 = 196 + JK²

collect like terms

JK² = 204

Find the square root of both sides

JK = 14. 28

The angle K takes the value of a right angle = 90 degrees

Learn about Pythagorean theorem at: https://brainly.com/question/654982

#SPJ1

The length of the curve y=2−x²,0≤x≤1 is approximately 1.70 units.

To use the arc length formula to compute the length of the curve y=√2−x²,0≤x≤1y=2−x²,0≤x≤1, we first need to find the derivative of each equation.

For y=√2−x², the derivative is y'=-x/√2-x².

For y=2-x², the derivative is y'=-2x.

Next, we can use the arc length formula:

L = ∫aᵇ √[1+(y')²] dx

For y=√2−x²,0≤x≤1:

L = ∫0¹ √[1+(-x/√2-x²)²] dx
L = ∫0¹ √[(2-x²)/(2-x²)] dx
L = ∫0¹ dx
L = 1

Therefore, the length of the curve y=√2−x2,0≤x≤1 is 1 unit.

For y=2−x2,0≤x≤1:

L = ∫0¹ √[1+(-2x)²] dx
L = ∫0¹ √[1+4x²] dx
L = 1/2 × (1/2 × ln(2√(5)+5) + 1/2 × √(5) + 1/2 × ln(2√(5)+1) + 1/2)
L ≈ 1.70

Therefore, the length of the curve y=2−x²,0≤x≤1 is approximately 1.70 units.

To learn more about length of the curve here:

brainly.com/question/31376454#

#SPJ11

The five-number summary of the given data is,

1) Minimum: 0.02

2) Q₁: 0.075

3) Median (Q2): 0.11

4) Q₃: 0.13

6) Maximum: 0.23

First, let's sort the data in ascending order

0.02, 0.07, 0.08, 0.10, 0.12, 0.12, 0.14, 0.23

The minimum value is the smallest number in the data set, which is 0.02.

The maximum value is the largest number in the data set, which is 0.23.

To find the median (Q₂), we take the middle value of the data set. Since there are an even number of values, we take the average of the two middle values

Median (Q₂) = (0.10 + 0.12) / 2 = 0.11

To find the first quartile (Q₁), we need to find the median of the lower half of the data set. The lower half of the data set consists of the first four values

0.02, 0.07, 0.08, 0.10

Q₁ = (0.07 + 0.08) / 2 = 0.075

To find the third quartile (Q₃), we need to find the median of the upper half of the data set. The upper half of the data set consists of the last four values

0.12, 0.12, 0.14, 0.23

Q₃ = (0.12 + 0.14) / 2 = 0.13

Learn more about five-number summary here

brainly.com/question/29297089

#SPJ4

The given question is incomplete, the complete question is:

Blood alcohol content of driver's given breathalyzer test: .02 .07 .08 .10 .12 .12 .14 .23 . Compute the five number summary of this data

Answer:66s+54t+72

Step-by-step explanation:

You distribute 6 into all the numbers. So 6*12 = 72, 6*11s = 66s, 6*9t = 54t. The next step is to put it in standard form. So You would get 66s + 54t + 72

Answer:

35

Step-by-step explanation:

9*5=45

7*5=35

Answer:

35/45 is the correct answer

Answer:

titi got 28 walnuts

Step-by-step explanation:

If we have the ratio of walnuts for each person and at least one value, we can solve for the other values.

tayo : titi : tunde

 3x  : 4x :  5x      (x is just a variable for the exact quantity of walnuts relative to the ratio)

If tayo has 21 walnuts, this means that

3x = 21

We can solve this equation for x

3x=21

21/3=7

x=7

Now that we know x, we can plug it in for the other values to solve for the amount of walnuts that titi and tunde have.

If titi has 4x walnuts, and x=7, then we can solve for the amount of walnuts titi has.

4*7=28

Therefore, titi has 28 walnuts

Sample A has a range of 10 (18-8) while Sample B has a range of 10 as well (26-16). Therefore, both samples have the same range and thus the same standard deviation. Therefore, the answer is: Both samples have the same standard deviation.

To determine which sample has the largest standard deviation, we need to calculate the standard deviation for both Sample A and Sample B.

To determine which sample has the largest standard deviation, we can calculate the standard deviation for both samples using a formula or a calculator. However, in this case, we can simply look at the range of the scores in each sample. The larger the range, the larger the standard deviation.

Step 1: Calculate the mean of each sample.
Sample A: (8+10+12+15+18)/5 = 63/5 = 12.6
Sample B: (16+18+20+23+26)/5 = 103/5 = 20.6

Step 2: Calculate the variance of each sample.
Sample A: [(8-12.6)^2+(10-12.6)^2+(12-12.6)^2+(15-12.6)^2+(18-12.6)^2]/4 = [21.16+6.76+0.36+5.76+29.16]/4 = 62.96/4 = 15.74
Sample B: [(16-20.6)^2+(18-20.6)^2+(20-20.6)^2+(23-20.6)^2+(26-20.6)^2]/4 = [21.16+6.76+0.36+5.76+29.16]/4 = 62.96/4 = 15.74

Step 3: Calculate the standard deviation for each sample (square root of variance).
Sample A: sqrt(15.74) ≈ 3.97
Sample B: sqrt(15.74) ≈ 3.97

Both samples have the same standard deviation of approximately 3.97.

Learn more about the sample:

brainly.com/question/12823688

#SPJ11

The sample size increases, the 95% confidence interval becomes narrower because it provides a more precise estimate of the true population parameter.

Confidence interval is a range of values that estimates the true population parameter with a certain level of confidence. A 95% confidence interval means that if the same population is sampled multiple times, the calculated confidence interval will contain the true population parameter in 95% of the samples.

When the sample size increases, it provides more data points to estimate the population parameter. This increased sample size results in a smaller standard error, which is the standard deviation of the sample mean. A smaller standard error means that the sample mean is likely to be closer to the true population parameter, resulting in a narrower confidence interval.

Mathematically, the formula for the confidence interval is:

Confidence Interval = Sample Mean ± (Critical Value * Standard Error)

Where the critical value depends on the desired level of confidence (e.g., 95%) and the standard error is calculated from the sample size. As the sample size increases, the standard error decreases, which means that the margin of error (the range between the sample mean and the critical value multiplied by the standard error) becomes smaller. Therefore, the confidence interval becomes narrower with a larger sample size.

Therefore, when the sample size increases, the 95% confidence interval becomes narrower because it provides a more precise estimate of the true population parameter.

To learn more about confidence interval here:

brainly.com/question/24131141#

#SPJ11