Two particles are separated by 0.38 m and have charges of -6.25x 10 C and 2.91 x 10 C. Use Coulomb's law to predict the force between the particles if the distance is doubled. The equation for Coulomb's law is Fe = g, and the constant, k, equals 9.00 x 10° Nm/C A. -1.13 x 10-6 N OB. 1.13x 106N O C. 2.83 x 10-7 N OD.-2.83x 10N sUBMIT​

Answer:

v = 1.74 m/s

Explanation:

Given that,

Diameter of a circular track, d = 100 m

Distance covered for the 4 laps,

[tex]D=4\pi d\\\\D=4\pi \times 100\\\\D=1256.63\ m[/tex]

Time, t = 12 minutes = 720 s

We need to find the velocity of the peter. It can be calculated as follows :

[tex]v=\dfrac{D}{t}\\\\v=\dfrac{1256.63\ m}{720\ s}\\\\v=1.74\ m/s[/tex]

So, the speed is running with a velocity of 1.74 m/s.

Peter is running at 1.7453 m/sec.

Given to us,

Diameter of the circular track, D = 100 meters,

Number of laps Peter run, L = 4 laps,

Time taken by Peter, t = 12 minutes,

1 lap = circumference of the circle,

4 laps = 4 x circumference of the circle,

As we know, the circumference of a circle is given by πD.

So, 4 laps = 4 x circumference of the circle,

[tex]\begin{aligned}4 laps &= 4\times \pi \times D\\&= 4 \times \pi \times 100\\& = 1,256.6370\ meters\\\end{aligned}[/tex]

Also, we know that 1 minute has 60 sec.

so, 4 minutes = (4 x 60) seconds

Further, speed is given [tex]\bold{(\dfrac{Distance}{Time} )}[/tex]

Thus,

[tex]\begin{aligned}speed &= \dfrac{Distance\ coverd\ by\ Peter}{Time\ taken\ by\ Peter}\\&=\dfrac{1,256.6370}{12\times 60}\\&=1.7453\ m/sec \end{aligned}[/tex]

Hence, Peter is running at 1.7453 m/sec.

To know more visit:

https://brainly.com/question/7359669

Answer:

hello your question is incomplete attached below is the complete question

Answer : attached below

Explanation:

A) finding the particular solution at t = 0

attached below is the detailed solution of the particular solution knowing that t = 0

Answer:

Its A

Explanation:

Just did the quiz

The pair of objects that should be strongly attracted is option A. A positively charged particle and a negatively charged particle.

When there is a positively charged particle  & the negatively charged particle so due to this it should be strongly attracted.  Also, when there are two positively charged particles, or a negative one or a include negative one or neutral one so it should not be strongly attracted. Therefore, the option A is correct.

learn more about particles here: https://brainly.com/question/12734041

Answer:

It is si-32

Explanation:

Answer:

silicon-32

Explanation:

just took the quiz and got it right

Answer:

20000

Explanation:

Newtons Second law states that the force acting on an object is equal to its mass times its acceleration, f=ma. To solve for force, plug in your values for m and a, and then solve. f = (1000)*(20) = 20000

Answer:

We are given:

V1 = 5.5L          T1 = -38 C   or   235 k

V2 = 1.3L           T2 = T

From the gas equation:

PV = nRT

Since the pressure (P) , number of moles (n) and the universal gas constant (R) are constants, we can write the same equation as:

V / T = k  (where k is a constant)

so a bit more insight, since the values noted above are constant, when multiplied by each other, they will provide us with a constant number irrespective of the value of the variables

Changing the variables for the first case:

V1 / T1 = k   (where k is the same constant) ----------------(1)

Similarly,

V2 / T2 = k  (again, k has the same value)----------------(2)

From (1) and (2):

k is the common value

V1 / T1 = V2 / T2

Replacing the variables

5.5 / 235 = 1.3 / T

T = 1.3 * 235 / 5.5

T = 55.54 k

Therefore, at 55.54 K the gas will have a volume of 1.3L

Density ρ is mass m per unit volume v, or

ρ = m / v

Solving for v gives

v = m / ρ

So the given object has a volume of

v = (130 g) / (65 g/cm³) = 2 cm³

Answer:

a: 19.6 meters b: 9.8meters per second

Explanation:

speed and object falls is 9.8 meters per second. 9.8 meter times 2 is 19.8 meters.

Answer:

Explanation:

To find the force given the mass , velocity and time can be found by using the formula

[tex]f = \frac{m \times v}{t} \\ [/tex]

where

m is the mass

v is the velocity

t is the time

From the question

m = 1500 kg

v = 30 m/s

t = 3 s

We have

[tex]f = \frac{1500 \times 30}{3} = \frac{45000}{3} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

At constant velocity, his weight equals the force of friction. In other words, there is no net force. If however, he loosens his grip and decreases the friction force, he will accelerate downward.

Explanation:

Answer:

Yes at A the mechanical energy is conserved.

Yes at B the part of mechanical energy is conserved potential energy and  kinetic energy and some is lost as frictional force.

Explanation:

Ratio = Eb/ Ea=  1058.3 J/2940 J= 0.3599

Ratio = Ec/ Eb= 0J/ 1058.3 J= 0

At point A the skater is at rest  or it is the starting point and the whole energy is due to the position of the  skater i.e= mgh = 50 *9.8*6=  2940 J

Since there's no movement there is no Kinetic energy = 0 J

Yes at A the mechanical energy is conserved.

At point B the skater has traveled for some of the distance . It has potential energy and  kinetic energy.

Yes at B the part of mechanical energy is conserved as potential energy and  kinetic energy.

The total Mechanical energy = 1058.3 J

At point B Total Mechanical energy = PE+ KE

1058.3J = 980 J + 78.3 J

1058.3 J = mgh + 1/2mv²

      = 50*2*9.8 + 1/2 *50*(8.85)²

       = 980 J + 78.3 J

As the total energy of the system must remain the same some of the mechanical energy is lost as frictional force at point B .

2940 J-1058.3 J= 1881.7

At Point C the skater has arrived at the end point and the height , speed, PE, KE and ME  all are zero.

(a) The ratio of the mechanical energy at B and mechanical energy at A is 0.36.

(b) The ratio of the mechanical energy at C and mechanical energy at A is 0.

(c) mechanical energy is conserved between a and b.

(d) mechanical energy is not conserved between b and c.

The given parameters;

The ratio of the mechanical energy at B and mechanical energy at A;

[tex]ratio = \frac{E_b}{E_a} = \frac{1058.3}{2940} = 0.36[/tex]

The ratio of the mechanical energy at C and mechanical energy at A;

[tex]ratio = \frac{E_c}{E_a} = \frac{0}{2940} = 0[/tex]

The change mechanical energy between A and B from the given position;

[tex]\Delta E = mg(h_b - h_a) - \frac{1}{2}m(v_b^2 - v_a^2)\\\\ \Delta E = 50\times 9.8(2-6) \ - \ \frac{1}{2} \times 50(8.85^2 - 0)\\\\\Delta E =- 1960 + 1960\\\\\Delta E = 0 \ J[/tex]

Thus, we can conclude that mechanical energy is conserved between a and b.

The change mechanical energy between A and B from the given position;

[tex]\Delta E = mg(h_c - h_b) - \frac{1}{2}m(v_c^2 - v_b^2)\\\\ \Delta E = 50\times 9.8(0-2) \ - \ \frac{1}{2} \times 50(0^2 - 8.85^2)\\\\\Delta E = -980 + 1960 \\\\\Delta E = 980 \ J[/tex]

Thus, we can conclude that mechanical energy is not conserved between b and c.

Learn more here:https://brainly.com/question/19969393

Answer:

The number of turns in the solenoid is 22366.

Explanation:

The number of turns in the solenoid can be found using the following equation:

[tex] B = \mu_{0} I\frac{N}{L} [/tex]

Where:

B: is the magnetic field = 8.90 T

L: is the solenoid's length = 0.300 m

N: is the number of turns =?

I: is the current = 95 A

μ₀: is the magnetic constant = 4π×10⁻⁷ H/m

By solving equation (1) for N we have:

[tex] N = \frac{BL}{\mu_{0} I} = \frac{8.90 T*0.300 m}{4\pi \cdot 10^{-7} H/m*95 A} = 22366 turns [/tex]

Therefore, the number of turns in the solenoid is 22366.

I hope it helps you!

Answer:

we need the image to do so.

Explanation:

sorry

Answer:

Each box represents an element and contains its atomic number, symbol, average atomic mass, and (sometimes) name.

Explanation:

Answer:

An element's period and group

Answer:

The final speed of the block moving at the instant the spring has been compressed is approximately 3.674 meters per second.

Explanation:

The spring constant is 2000 newtons per meter. Let consider the spring-block system, from Principle of Energy Conservation we can represent it by the following model:

[tex]U_{k,1}+K_{1} = U_{k,2}+K_{2}[/tex]

[tex]K_{2} = K_{1}+(U_{k,1}-U_{k,2})[/tex] (Eq. 1)

Where:

[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Initial and final kinetic energies of the block, measured in joules.

[tex]U_{k,1}[/tex], [tex]U_{k,2}[/tex] - Initial and final elastic potential energy, measured in joules.

And we expand the equation above by definitions of elastic potential energy and kinetic energy:

[tex]\frac{1}{2}\cdot m \cdot v_{2}^{2} = \frac{1}{2}\cdot m\cdot v_{1}^{2} + \frac{1}{2}\cdot k\cdot (x_{1}^{2}-x_{2}^{2})[/tex]

[tex]v_{2} = \sqrt{v_{1}^{2}+\frac{k}{m}\cdot (x_{1}^{2}-x_{2}^{2}) }[/tex] (Eq. 1b)

Where:

[tex]m[/tex] - Mass of the block, measured in kilograms.

[tex]k[/tex] - Spring constant, measured in newtons per meter.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Initial and final velocities of the block, measured in meters per second.

[tex]x_{1}[/tex], [tex]x_{2}[/tex] - Initial and final positions of spring, measured in meters.

If we know that [tex]v_{1} = 6\,\frac{m}{s}[/tex], [tex]k = 2000\,\frac{N}{m}[/tex], [tex]m = 2\,kg[/tex], [tex]x_{1} = 0\,m[/tex] and [tex]x_{2} = 0.15\,m[/tex], the final speed of the block moving at the instant the spring has been compressed is:

[tex]v_{2} = \sqrt{\left(6\,\frac{m}{s} \right)^{2}+\left(\frac{2000\,\frac{N}{m} }{2\,kg} \right)\cdot [(0\,m)^{2}-(0.15\,m)^{2}]}[/tex]

[tex]v_{2}\approx 3.674\,\frac{m}{s}[/tex]

The final speed of the block moving at the instant the spring has been compressed is approximately 3.674 meters per second.

Answer:

Uniformly accelerated rectilinear motion (MRUA), also known as uniformly varied rectilinear motion (MRUV), is one in which a mobile moves along a straight path being subjected to a constant acceleration.

Explanation:

Answer:

913 hours ur welcome :)

Answer:

The one with the faster velocity is the one with a velocity of -10m/s

Answer: The options are not given.

Here are the options.

a) There is an additional force lifting up on you.

(b) At the top you continue going straight and the seat moves out from under you.

(c) You press on the seat less than when the coaster is at rest.Thus the seat presses less on you. (

d) Both b and c are correct.

(e) a, b, and c are correct.

The correct option Is D.

B.At the top you continue going straight and the seat moves out from under you. C.At the same time, you press on the seat less than when the coaster is at rest because the normal force expirienced will be less.

Explanation:

At the top you continue going straight and the seat moves out from under you.At the same time, you press on the seat less than when the coaster is at rest because the normal force expirienced will be less because it is as a result of a phenomenon called Weightlessness. This occur when there is no force or little force is acting on your body. At the top you continue going straight and the seat moves out from under you because there is no force acting on your body and when the body is in free fall i.e acceleration due to gravity , the person is not supported by any thing at.

That is the scenarion that occur...

v² - u² = 2 a ∆x

where u = initial velocity (27 m/s), v = final velocity (0), a = acceleration (-8 m/s², taken to be negative because we take direction of movement to be positive), and ∆x = stopping distance.

So

0² - (27 m/s)² = 2 (-8 m/s²) ∆x

∆x = (27 m/s)² / (16 m/s²)

∆x ≈ 45.6 m

The stopping distance of car achieved during the braking is of 45.56 m.

Given data:

The initial speed of car is, u = 27 m/s.

The final speed of car is, v = 0 m/s. (Because car comes to stop finally)

The magnitude of deacceleration is, [tex]a = 8\;\rm m/s^{2}[/tex].

In order to find the stopping distance of the car, we need to use the third kinematic equation of motion. Third kinematic equation of motion is the relation between the initial speed, final speed, acceleration and distance covered.

Therefore,

[tex]v^{2}=u^{2}+2(-a)s[/tex]

Here, s is the stopping distance.

Solving as,

[tex]0^{2}=27^{2}+2(-8)s\\\\s = 45.56 \;\rm m[/tex]

Thus, we can conclude that the stopping distance of car achieved during the braking is of 45.56 m.

Learn more about the kinematic equation of motion here:

https://brainly.com/question/11298125

Answer:

x = 73.71 [m]

Explanation:

In order to solve this problem we must use two formulas of kinematics. It is important to make it clear that these formulate are for uniformly accelerated motion, i.e. with constant acceleration.

[tex]v_{f }= v_{i}-(a*t)[/tex]

where:

Vf = fnal velocity = 0

Vi = initial velocity = 32.4 [m/s]

t = time = 4,55 [s]

a = acceleration or desacceleration [m/s^2]

0 = 32.4 - (a*4.55)

a = 7.12 [m/s^2]

Note: it is important to clarify that the negative sign in the above equation is because the car stops and decreases its speed to zero, thus its final velocity is equal to zero.

Now using the following equation:

[tex]x = x_{o} + (v_{i}*t)-(\frac{1}{2} )*a*t^{2}[/tex]

where:

xo = initial distance = 0

x = final distance [m]

Therefore we have:

x = 0 + (32.4*4.55) - (0.5*7.12*4.55^2)

x = 73.71 [m]

Answer:

they were in two places in flint and Birmingham and in Birmingham it is hot but flint of cold the Simi is they both have Sunday school for Joetta

Explanation:

use in your own words teachers know when your not trust me.

Complete Question

The complete question is shown on the first and second uploaded image

Answer:

The expression is  [tex]W_c =  P_o V_o ln (R_v)[/tex]  

Explanation:

Generally smallest workdone done by  a gas is mathematically represented as

          [tex]dW  =  PdV[/tex]

Generally for an isothermal process

    [tex]PV  =  nRT = constant [/tex]

=>   [tex]P = \frac{nRT}{V}[/tex]

Generally the total workdone is mathematically represented as

   [tex]W_c =  \int\limits^{v_f}_{V_o} {\frac{nRT}{V} } \, dV[/tex]

=> [tex]W_c = nRT  \int\limits^{V_f}_{V_o} {\frac{1}{V} } \, dV[/tex]

=>  [tex]nRT [lnV]   | \left \ {V_f}} \atop {V_o}} \right.[/tex]

=>  [tex]W_c = nRT [ln(V_f) - ln(V_o)][/tex]

=>  [tex]W_c = nRT ln \frac{V_f}{V_o}[/tex]

From the question [tex]\frac{V_f}{V_o }  =  R_v[/tex]

=> [tex]W_c =  P Vln (R_v)[/tex]

at initial  state

[tex]W_c =  P_o V_o ln (R_v)[/tex]  

This question involves the concepts of mass, acceleration due to gravity, weight, Newton's Gravitational Law, gravitational force, and graphs.

Graph "A" re[resents the best relationship between acceleration due to gravity, and mass for objects.

The relationship between the mass of earth and the acceleration due to gravity can be found by equating the weight of the object and the gravitational force, from Newton's Gravitational Law on it:

[tex]Weigth = Gravitational\ Force\\\\mg = \frac{GmM}{r^2}\\\\g = \frac{GM}{r^2} ---------- eqn(1)[/tex]

where,

g = acceleration due to gravity

G = universal gravitational constant

M = mass of Earth

r = radius of Earth

Hence, it is clear from equation (1), that mass of the Earth and the acceleration due to gravity have a direct relationship with each other. Therefore the graph between them will be a straight line, which is Graph A.

Learn more about Newton's Law of Gravitation here:

brainly.com/question/17931361?referrer=searchResults

The attached picture illustrates Newton's Law of Gravitation.

Answer:

Dividing the silicon density by 1000 and then multiply it by 1000000.

Explanation:

A kilogram equals 1000 grams and a cubic meter equals 1000000 cubic centimeters. Hence, we must divide the silicon density by 1000 and then multiply itby 1000000 to convert the value into kilograms per cubic centimeter. That is:

[tex]x = 2.33\,\frac{g}{cm^{3}}\times \frac{1\,kg}{1000\,g}\times \frac{1000000\,cm^{3}}{1\,m^{3}}[/tex]

[tex]x = 2330\,\frac{kg}{m^{3}}[/tex]

In a nutshell, we must multiply the density of silicon by 1000 to obtains its value in kilograms per cubic meter.

Answer:

The appropriate response is "Optical printer ".

Explanation:

Answer:

The acceleration of the box is 0.67 m/s²

Explanation:

Given that,

Mass of box = 30.0 kg

Horizontal force = 230 N

Friction force = 210 N

We need to calculate the acceleration of the box

Using balance equation

[tex]F-f_{k}=ma[/tex]

[tex]a=\dfrac{F-f_{k}}{m}[/tex]

Where, F = horizontal force

[tex]f_{k}[/tex] =frictional force

m= mass of box

a = acceleration

Put the value into the formula

[tex]a=\dfrac{230-210}{30}[/tex]

[tex]a=0.67\ m/s^2[/tex]

Hence, The acceleration of the box is 0.67 m/s²