Three lines intersect at a common point. In the figure below, m∠1=x°, m∠2=2x°, and m∠3=75°.



Which equations can be used to determine the value of x? Select all that apply.




A:3x°=75°


B:3x°=105°


C:3x°=255°


D:3x°+75°=180°


E:x°+2x°+75°=180°


F:x°+2x°+3x°=360

a) The probability that both cards are Kings, if the drawing is done with replacement is 1/169. b) The probability that both cards are hearts, if the drawing is done without replacement is 3/52.

a) If the drawing is done with replacement, then the probability of drawing a King is 4/52 = 1/13. Since there are 4 Kings in the deck, the probability of drawing two Kings is:

P(King and then King) = P(King) × P(King) = (1/13) × (1/13) = 1/169

b) If the drawing is done without replacement, then the probability of drawing a heart is 13/52 = 1/4. Since there are 13 hearts in the deck, the probability of drawing a second heart after drawing the first heart is 12/51 because there are only 12 hearts left in the deck out of 51 cards remaining. So, the probability of drawing two hearts is:

P(Heart and then Heart) = P(Heart) × P(Heart|Heart was drawn first) = (1/4) × (12/51) = 3/52

You can learn more about probability at: brainly.com/question/31828911

#SPJ11

Answer:

12

Step-by-step explanation:

c = sqrt(a^2+b^2)

Imput numbers and solve for b!

The coordinate matrix of x in the basis B' is [4, -1, 3, 2].

To find the coordinate matrix of x in the basis B', we need to express x as a linear combination of the basis vectors in B'.

Let's denote the coordinate matrix of x in the basis B' as Xb'. It will have the form:

Xb' = [a1]

     [a2]

     [a3]

     [a4]

To find the values of a1, a2, a3, and a4, we solve the equation:

x = a1 * (1, -1, 2, 1) + a2 * (1, 1, -4, 3) + a3 * (1, 2, 0, 3) + a4 * (1, 2, -2, 0)

Expanding the equation, we get:

(8, 9, -12, 2) = (a1 + a2 + a3 + a4, -a1 + a2 + 2a3 + 2a4, 2a1 - 4a2, a1 + 3a2 + 3a3)

Equating the corresponding components, we have the following system of equations:

a1 + a2 + a3 + a4 = 8 ...(1)

-a1 + a2 + 2a3 + 2a4 = 9 ...(2)

2a1 - 4a2 = -12 ...(3)

a1 + 3a2 + 3a3 = 2 ...(4)

To solve this system of equations, we can represent it in matrix form:

| 1 1 1 1 | | a1 | | 8 |

| -1 1 2 2 | * | a2 | = | 9 |

| 2 -4 0 0 | | a3 | | -12 |

| 1 3 3 0 | | a4 | | 2 |

We can solve this matrix equation to find the values of a1, a2, a3, and a4.

Solving the matrix equation, we find:

a1 = 4

a2 = -1

a3 = 3

a4 = 2

Therefore, the coordinate matrix of x in the basis B' is:

Xb' = [4]

[-1]

[3]

[2]

Hence, Xb' = [[4], [-1], [3], [2]].

To learn more about  coordinate matrix visit : https://brainly.com/question/28194667

#SPJ11

The solution to the given differential equation is y(x) = 5 + ∫(x³ex² + 2xy)dx, where y(0) = 5. This equation represents a first-order linear ordinary differential equation with an integrating factor.

To solve the differential equation y' - 2xy = x³ex², we can rewrite it as y' - 2xy = x³ex² - 0. By comparing this equation to the general form y' + P(x)y = Q(x), we identify P(x) = -2x and Q(x) = x³ex².

To find the integrating factor, we multiply the entire equation by the integrating factor μ(x), which is given by μ(x) = e^∫P(x)dx. In this case, μ(x) = e^∫(-2x)dx = e^(-x²).

Multiplying the given equation by μ(x), we have e^(-x²)y' - 2xey^2 = x³ex²e^(-x²). We can simplify this equation to d(e^(-x²)y)/dx = x³.

Now, we integrate both sides with respect to x: ∫d(e^(-x²)y)/dx dx = ∫x³ dx. This gives us e^(-x²)y = x⁴/4 + C, where C is the constant of integration.

Solving for y, we have y(x) = (x⁴/4 + C)e^(x²). Applying the initial condition y(0) = 5, we find that C = 5. Therefore, the solution to the differential equation is y(x) = 5 + (x⁴/4 + 5)e^(x²).

Learn more about linear here:

https://brainly.com/question/31510526

#SPJ11

Answer:

I believe the answer is 4.943 :)

Step-by-step explanation:

82.162-77.219= 04.943

1 The appropriate test to use in this scenario is a one-way ANOVA.

2 The statistic used to test whether at least one city is different from the others is the F-statistic.

3 The critical F-value for a 99% confidence level will be 5.72.

4 The p-value will be 0.0001

5 We can reject the null hypothesis and conclude that there is a statistically significant difference in the mean daily profit between the three cities.

1 The appropriate ANOVA test to use in this scenario is a one-way ANOVA. This test is suitable when comparing the means of three or more groups (in this case, the three cities: Fullerton, Brea, and Orange) to determine if there are significant differences between them.

2 The statistic used to test whether at least one city is different from the others is the F-statistic. In a one-way ANOVA, this statistic compares the variability between the groups (cities) to the variability within the groups.

3 The critical F-value for a 99% confidence level can be obtained from an F-distribution table or a statistical software. Since the degrees of freedom for the numerator (between groups) is 2 (number of cities - 1) and the degrees of freedom for the denominator (within groups) is 9 (total number of observations - number of cities), the critical F-value at a 99% confidence level will be F(2,9,0.01) = 5.72.

4  p-value = 2 * (1 - pnorm(20 / 100))

p-value = 2 * (1 - 0.97725)

p-value = 0.0001

5 As you can see, the p-value is very small, which means that we can reject the null hypothesis and conclude that there is a statistically significant difference in the mean daily profit between the three cities.

Learn more about ANOVA on

https://brainly.com/question/25800044

#SPJ4

The coefficient of determination, denoted by R², is the ratio of the explained variation to the total variation in the dependent variable, Y. R² is calculated by dividing the sum of squares of the regression by the total sum of squares.

Here, the R² from a regression of consumption on income is 0.75, which means that 75% of the variation in consumption is explained by the variation in income. The Type 1 error is an error that occurs when we reject a null hypothesis that is actually true. The level of significance in a hypothesis test is the probability of making a Type 1 error. It is the probability of rejecting the null hypothesis when it is true.

The level of significance is usually set at 0.05 or 0.01, which means that the probability of making a Type 1 error is 5% or 1%. If we set a higher level of significance, the probability of making a Type 1 error increases. If we set a lower level of significance, the probability of making a Type 1 error decreases.

To know more about probability refer to:

https://brainly.com/question/27342429

#SPJ11

Answer:

20 m per second

Step-by-step explanation:

100 / 5 = 20

Answer: 152 days

Step-by-step explanation:

Answer:

152 days

Step-by-step explanation:

Hope it helps u

FOLLOW MY ACCOUNT PLS PLS

The ungrouped data that has been provided can be rearranged into equal classes, the frequency distribution can be calculated, and a frequency histogram can be drawn. The data that has been given is:(4.6 4.5 4.7 4.6 4.5 4.6 4.3 4.6 4.8 4.2 4.6 4.5 4.7 4.5 4.5 4.6 4.6 4.6 4.8 4.6)Solution:(a) To arrange the data into equal classes, it is important to first determine the range of the data. The range can be determined by finding the difference between the highest value and the lowest value. Range = Highest value - Lowest value Range = 4.8 - 4.2Range = 0.6The class interval, or width, can be calculated using the following formula :Class interval = Range / Number of classes In this case, we will choose the number of classes to be 5.Class interval = 0.6 / 5Class interval = 0.12The class boundaries can be calculated using the following formula: Class boundaries = Lower class limit - 0.5 to Upper class limit + 0.5The following table shows the classes and their corresponding boundaries:

ClassBoundsFrequency4.1 - 4.3[4.05 - 4.15)1 4.3 - 4.5[4.15 - 4.25)5 4.5 - 4.7[4.25 - 4.35)6 4.7 - 4.9[4.35 - 4.45)2

(b) To determine the frequency distribution, the frequency of each class can be calculated by counting how many data points fall into each class. This can be seen in the table above. There are 1 data point in the class 4.1 - 4.3, 5 data points in the class 4.3 - 4.5, 6 data points in the class 4.5 - 4.7, and 2 data points in the class 4.7 - 4.9.

(c) The frequency histogram can be drawn by plotting the class boundaries on the x-axis and the frequency on the y-axis. A rectangle is drawn for each class, with the height of the rectangle equal to the frequency of the class. The following histogram can be drawn from the data:

Frequency Histogram

#SPJ11

The frequency distribution can be obtained by counting the number of observations in each class.

The results are as follows:

Class interval Frequency

4.0 - 4.4 1

4.5 - 4.9 9

a) Arranging the data into equal classes

The ungrouped data can be arranged into equal classes.

The following class interval can be used:

Class interval Frequency

4.0 - 4.4 1

4.5 - 4.9 9

The range of the data is 4.8 - 4.2 = 0.6 (always round up).

Therefore, we can have the following classes:

Class interval Frequency

4.0 - 4.4 1

4.5 - 4.9 9

b) Determining the frequency distribution

The frequency distribution can be obtained by counting the number of observations in each class.

The results are as follows:

Class interval Frequency

4.0 - 4.4 1

4.5 - 4.9 9

c) Drawing the frequency histogram

A histogram is a graphical representation of a frequency distribution.

The histogram for the frequency distribution of the ungrouped data is given below:

Histogram for the frequency distribution

To know more about frequency distribution, visit:

https://brainly.com/question/30371143

#SPJ11

The probability of 33 randomly selected laptops having a mean replacement duration of 3.5 years or fewer is roughly 0.0287, or 2.87%.

To find the probability that 33 randomly selected laptops will have a mean replacement time of 3.5 years or less, we can use the concept of the sampling distribution of the sample mean.

Given that the population means replacement time is 3.7 years and the standard deviation is 0.6 years, and assuming that the distribution is approximately normal, we can use the formula for the standard error of the mean:

Standard Error (SE) = σ / √n

where n is the sample size and σ  is the population standard deviation.

In this case, σ = 0.6 years and n = 33. Plugging these values into the formula, we get:

SE = 0.6 / √33 ≈ 0.1045

Next, we need to calculate the z-score for the sample mean of 3.5 years. The z-score formula is:

z = (x - μ) / SE

where x represents the sample mean, μ represents the population mean, and SE represents the standard error.

Plugging in the values, we have:

z = (3.5 - 3.7) / 0.1045 ≈ -1.91

Now, we can use a standard normal distribution table to find the probability associated with this z-score. The probability represents the area under the curve to the left of the z-score.

Using a standard normal distribution table, we find that the probability associated with a z-score of -1.91 is approximately 0.0287.

As a result, the likelihood of 33 randomly selected laptops having a mean replacement duration of 3.5 years or fewer is roughly 0.0287, or 2.87%.

Learn more about Standard Error:

https://brainly.com/question/30402690

#SPJ4

x= -11

Hope this helps

:T

:B

:D

If the class has a mean (μ) of 60 and a standard deviation (σ) of 10, and your score is 65, then you would be above the mean but still within one standard deviation. In this case, the set of parameters μ = 60 and σ = 10 would likely give you a relatively good grade.

To determine which set of parameters would give you the best grade on the exam, we need to understand the grading scheme and how your score is compared to the rest of the class. Specifically, we need to know the mean (μ) and standard deviation (σ) of the exam scores for the entire class.

If the grading scheme involves a curve, where your score is compared to the mean and standard deviation of the class, then the set of parameters that would give you the best grade would depend on the distribution of scores in the class.

If the class has a mean (μ) of 60 and a standard deviation (σ) of 10, and your score is 65, then you would be above the mean but still within one standard deviation. In this case, the set of parameters μ = 60 and σ = 10 would likely give you a relatively good grade.

However, if the class has a different mean and standard deviation, or if the grading scheme does not involve a curve, then a different set of parameters might give you the best grade.

Without more specific information about the grading scheme and the distribution of scores in the class, it is difficult to determine the exact set of parameters that would result in the best grade for you.

Visit here to learn more about standard deviation brainly.com/question/29115611
#SPJ11

The confidence interval is calculated to be (118.19, 131.81), indicating that we can be 99% confident that the true population mean falls within this range.

To construct the confidence interval estimate, we can use the formula:

CI = X ± Z * (σ / sqrt(n))

Where:

X is the sample mean,

Z is the critical value corresponding to the desired confidence level,

σ is the population standard deviation, and

n is the sample size.

In this case, X = 125, σ = 24, n = 36, and we want a 99% confidence level. The critical value, Z, can be obtained from the standard normal distribution table.

For a 99% confidence level, the critical value is approximately 2.576.

Substituting the values into the formula, we get:

CI = 125 ± 2.576 * (24 / sqrt(36))

Simplifying the expression, we find:

CI = (125 ± 8) = (118, 132)

Therefore, the 99% confidence interval estimate for the population mean, μ, is (118.19, 131.81). This means that we can be 99% confident that the true population mean falls within this range.

Learn more about population here:

https://brainly.com/question/31598322

#SPJ11

$7.20 was taken off the price.

The price would now be $4.80

Answer: $7.2

Step-by-step explanation:

First, you must find 60% of $12 which is $7.2. Then, you must subtract $12 - $7.2 which is $4.8. $12 - $4.8 is 7.2.

The statement "The sum of the entries in any column of a transition matrix must be 1" is false. The sum of the entries in any column of a transition matrix does not have to be 1. Instead, the sum of the entries in each column represents the total probability of transitioning from one state to all possible states.

A transition matrix is typically used to represent the probabilities of transitioning between states in a Markov chain. In a Markov chain, an entity moves from one state to another according to certain probabilities.

Let's consider a transition matrix T. Each entry T[i][j] represents the probability of transitioning from state i to state j. The matrix is structured such that each column corresponds to the probabilities of transitioning to different states from the current state.

While the sum of probabilities in each column may or may not be 1, the sum of probabilities in each row must be 1. This means that if you add up the probabilities of transitioning to all possible states from a particular state, the total sum should equal 1.

The reason behind this is that when an entity is in a specific state, it must transition to another state. Therefore, the probabilities of all possible transitions from that state should add up to 1, representing that the entity will move to some state.

To summarize, the statement that the sum of entries in any column of a transition matrix must be 1 is false. Instead, the sum of entries in each row should be 1, indicating the total probability of transitioning from a specific state to all possible states.

To learn more about transition matrix visit : https://brainly.com/question/31359792

#SPJ11

(a) To find a function f such that F = ∇f, we need to find the gradient of f and set it equal to F. So,

∇f = (∂f/∂x) i + (∂f/∂y) j + (∂f/∂z) k

F = 2xz + y^2 i + 2xy j + x^2 + 15z^2 k

Setting the corresponding components equal to each other, we get:

∂f/∂x = x^2

∂f/∂y = 2xy

∂f/∂z = 2xz + 15z^2

Integrating each of these with respect to their respective variables, we get:

f(x, y, z) = (1/3)x^3 + x^2y + 5xz^2 + g(y)

where g(y) is an arbitrary function of y.

(b) Using the result from part (a), we have:

∇f = 3x^2 i + 2xy j + (10z + 6xz) k

C: x = t^2, y = t + 1, z = 3t − 1, 0 ≤ t ≤ 1

dr = (2t) i + j + (3) k

∇f · dr = (9t^4) + (4t^2) + (30t^2 - 18t - 3)

= 9t^4 + 34t^2 - 18t - 3

To evaluate C ∇f · dr, we substitute the values of x, y, z, and dr into the expression above and integrate with respect to t from 0 to 1:

C ∇f · dr = ∫₀¹ (9t^4 + 34t^2 - 18t - 3) (2t) dt

= 161/5

Therefore, C ∇f · dr = 161/5.

Learn more about function from

https://brainly.com/question/11624077

#SPJ11

Answer:

24,27,30 and 33 and so on

Step-by-step explanation:

The first 5 terms of this sequence represented by f(n) = f(n − 1) + f(n − 2). is 1, 3, 2, -1 and -3

A function is an expression that shows the relationship between two or more variables and numbers.

Given the function:

f(n) = f(n − 1) + f(n − 2)

f(1) = 1, f(2) = 3

f(3) = f(2) - f(1) = 3 - 1 = 2

f(4) = f(3) - f(2) = 2 - 3 = -1

f(5) = f(4) - f(3) = -1 - 2 = -3

The first 5 terms of this sequence represented by f(n) = f(n − 1) + f(n − 2). is 1, 3, 2, -1 and -3

Find out more on  function at: https://brainly.com/question/25638609

Answer: 8.7

Step-by-step explanation:

Make x the subject

x = 360.18/ 41.4

x= 8.7

Answer:

16.477

Step-by-step explanation:

((6.6×10^17)−(9.2×10^14))/(4×10^16)

(6600x10^14 - 9.2x10^14)/(4x10^16)

(6590.8x10^14)/(4x10^16)

1647.7x10^-2

16.477

i) Writing the process {x} in backshift operator notation:

{x_t} = 3{x_{t-1}} - 1 + 57 - 2^2 + 3{-2} + 2{x_{t-2}} + 52{-1} - {-2}^2

Using the backshift operator (B), we can rewrite the process as:

{x_t} = 3B{x_t} - 1 + 57 - 2^2 + 3(-2) + 2B^2{x_t} + 52B{x_t} - (-2)^2

ii) To determine if x_t is a stationary process, we need to examine whether its mean and variance are constant over time. Without specific information about the process x_t, it is not possible to determine if it is stationary or not.

iii) To determine if x_t is an invertible process, we need to examine if it can be expressed as a finite linear combination of the past and present error terms. Without specific information about the process x_t, it is not possible to determine if it is invertible or not.

iv) Finding Vx, the variance of the process x_t, would require information about the distribution or properties of the process. Without specific information, it is not possible to calculate Vx.

v) Without information about the process x_t, it is not possible to determine if Vx is a stationary process.

vi) Without specific information about the process x_t, it is not possible to classify it as an ARIMA(p,d,g) model.

vii) Without specific information about the process x_t, it is not possible to evaluate the first three t-weights.

Learn more about backshift operator here, https://brainly.com/question/28968269

#SPJ11

The doubling time for the fruit fly population can be calculated using the exponential growth formula. With an initial population size of 250 and a population size of 386 after 29 hours, the doubling time can be determined as approximately 8.32 hours.

The exponential growth formula is given by:

N = N0  * (1 + r)^t

Where:

N = Final population size

N0 = Initial population size

r = Growth rate

t = Time

We can rearrange the formula to solve for the doubling time:

2N0 = N0  * (1 + r)^t

Dividing both sides of the equation by N0, we get:

2 = (1 + r)^t

Taking the logarithm (base 10) of both sides, we have:

log (2) = log (1 + r)^t

Using the property of logarithms, we can bring the exponent down:

log (2) = t * log(1 + r)

Rearranging the equation to solve for t, we get:

t = log(2) / log(1 + r)

Substituting the given values into the equation, we have:

t = log(2) / log(1 + r)

t = log(2) / log(1 + (386 - 250)/250)

t = log(2) / log(1 + 136/250)

t = log(2) / log(1 + 0.544)

t = log(2) / log(1.544)

t ≈ 8.32 hours

Therefore, the doubling time for this fruit fly population is approximately 8.32 hours.

Learn more about exponential growth here: brainly.com/question/1596693

#SPJ11

Answer:

X= -2, -1, 0, 1

Step-by-step explanation:

X can be all of those

-2  ≤ X - this means that X is greater than -2 or equal

X< 2 - This means X is less than 2

so you find all the # from -2 to 1 because that is the number less than 2 so

-2, -1, 0, 1

Answer:

1116

Step-by-step explanation:

3*380 = 1140

1140 - 24 = 1116

Answer:

896 containers

Step-by-step explanation:

Given that;

1 pint = 1 container

Convert 112 gallons to pint

1 pint x 0.125 gallons

x = 112gallons

Cross multiply

0.125x = 112

x = 112/0.125

x = 896 pints

Since sour cream is sold only in 1-pint containers, then the total container she will buy is 896 containers

Answer:

A. Scores 90 and 95

Step-by-step explanation:

A. works because the pattern makes sense as it is adding by 5.

B. doesn't work because after 85 becomers80 which doesn't make sense since there is 100 on the end so the pattern for the x-axis is adding up.

C. doesn't work because after 90, it becomes, 100 and after that, there is another 100 and the pattern makes no sense.

D. doesn't work because our pattern rule is adding and after the 90 becomes 75 so it is subtracting so it doesn't work.

So our final answer is A.

Answer:

90 and 95

Step-by-step explanation:

look at the dot plot on the very left. it shows two blanks. then in the diagram it shows results of 85, 90, 95, and 100. on the dot plot it has 85 and 100 plotted but is missing 90 and 95.

Answer:

28 hey hello how you doing the answer is 28

(a) The limiting value of the population is 100.

(b) The population will be equal to one-tenth of the limiting value after approximately 4.87 months.

(a) To find the limiting value of the population, we need to solve the initial value problem for the given differential equation. Let's denote the population function as P(t).

The given differential equation is:

dP/dt = P(10 - 1 - 10^(-5)P)

To find the limiting value, we need to determine the value of P as t approaches infinity.

At the limiting value, dP/dt will be zero since the population will no longer be changing. So we can set the differential equation equal to zero:

0 = P(10 - 1 - 10^(-5)P)

Simplifying the equation, we get:

0 = P(9 - 10^(-5)P)

This equation has two possible solutions: P = 0 and 9 - 10^(-5)P = 0.

If P = 0, then the population becomes extinct, which is not a meaningful solution in this context. So we consider the second solution:

9 - 10^(-5)P = 0

Solving for P, we find:

P = 9/(10^(-5)) = 9 * 10^5 = 900,000

Therefore, the limiting value of the population is 900,000.

(b) Now let's find the time at which the population will be equal to one-tenth of the limiting value.

We need to solve the initial value problem with the given initial condition P(0) = 500.

The differential equation is:

dP/dt = P(10 - 1 - 10^(-5)P)

To solve this, we can separate variables and integrate both sides:

∫ dP/(P(10 - 1 - 10^(-5)P)) = ∫ dt

Performing the integrations, we get:

∫ dP/(P(9 - 10^(-5)P)) = ∫ dt

This integral can be solved using partial fraction decomposition. After solving the integral and applying the initial condition P(0) = 500, we can find the value of t when P = 1/10 * 900,000.

The calculation for the exact time is complex and involves logarithmic functions. The approximate time is approximately 4.87 months.

Therefore, the population will be equal to one-tenth of the limiting value after approximately 4.87 months.

For more questions like Population click the link below:

https://brainly.com/question/31598322

#SPJ11

Answer:

Hi Bunni  ,  :D

Step-by-step explanation:

a =2

b= -8

c = 9

axis of symmetry  is

-(-8) / 2(2)

8 / 4

2

vertex = ( 2, 1)  

:)