This is similar to the last problem, except that the first number on a line is an ID number that identifies an account. The same ID number may appear on any number of lines. Use a Dictionary to accumulate, for each ID, the sum of all the numbers that are on all the lines with that ID number. Call the input file id_data.txt. Write an output file called ID_sums.txt. On each line of the output fille, print an ID number and the sum. Sort the lines by the numerical order of the IDs
Answers
Answer:
Following are the code to this question:
def getSum(ID):#defining a method getSum that accept an ID
t= 0#defining a variable t
while ID!= 0:#defining while loop to check ID not equal to 0
t+= ID % 10# holding remainder value
ID = ID // 10#holding quotient value
return t#return total value
def readRecord(S):#defining a method readRecord that hold list
f_Read = open("idInfo.txt","r")#defining a variable f_Read to open file
for C_ID in f_Read:#defining for loop to hold file value
C_ID = C_ID.replace('\n', '')#use replace method
S[C_ID] = getSum(int(C_ID))#use list to method value
f_Read.close()#close file
def sortRecord(ID_List, t_List):#defining a sortRecord
for x in range(len(ID_List) - 1):#defining for loop to calculate the length of list
for y in range(0, len(ID_List) - x - 1):#defining for loop to calculate the length of list
if ID_List[y] > ID_List[y+1]:#defining if block to check value is greater
ID_List[y], ID_List[y+1] = ID_List[y+1], ID_List[y]#swap the value
t_List[y], t_List[y+1] = t_List[y+1], t_List[y]#swap the value
def showReport(ID, t):#defining a method showReport that accept id and t
for i in range(len(ID)):#defining for loop to hold index value
print(ID[i]," ",t[i])#print index value
def writeRecord(ID_List, t_List):#defining a method writeRecord that accept two list
f_Write = open("idSorted.txt","w")#defining a variable f_Write to hold store value in file
for i in range(len(ID_List)):#defining a for loop to store value with index
f_Write.write(ID_List[i])#hold list value
f_Write.write(" ") #for space
f_Write.write(str(t_List[i]) + "\n")# add index value
f_Write.close()#close file
def run():#defining method run
S = {}#defining an empty list
readRecord(S)#passing list into readRecord method
ID_List = list(S.keys())#defining a variable that holds key value in list
t_List = list(S.values())#defining a variable that holds values value in list
sortRecord(ID_List, t_List)#calling a method sortRecord by passing value
showReport(ID_List, t_List)#calling a method showReport by passing value
writeRecord(ID_List, t_List)#calling a method writeRecord by passing value
if "run":
run()
Output:
Please find the attached file.
Explanation:
In the above program code, 6 method getSum, readRecord, sortRecord,showReport, writeRecord, and run method is defined, in which getSum and readRecord is used a single list store value in parameters, and in other methods, it accepts two parameter to store value in key and values form and use a txt file to store and take value.
In the run method, an empty list s is declared, that pass into the variable ID_List and t_List, and call the method, in this program two a text file "idInfo.txt" is used, that holds some value in the file, and create another file that is "idSorted.txt", in this file it stores the value in the numerical order of the ID's.
Related Questions
Add the beginning comments at the top of the program.
In the first part of your program, create a for loop that runs three times:
Inside the for loop, prompt the user for an integer
Prompt the user for another integer
Call the function compare (you are going to create this function next)
Pass the variables that you used for the integer inputs from above
Create a function called compare (remember the function definition should go at the top of the program) and use two variables in the parameters of the function:
Inside of the function, create an if / elif / else structure that compares the two values passed into the function
If one value is less than the other, output that to the user (Ex: 2 is less than 4)
Elif the other value is less than the other output something similar (Ex: 4 is less than 9)
Else, output that they are equal to each other
That is it for the first part of the program.
Next, create an empty list called names.
Create a loop that runs 6 times:
Inside of the for loop, prompt the user for a name
Append the name to the list
Outside of the for loop, prompt the user for how many people they would like to vote off the island.
Call the function eliminate and pass the variable you used from step 7 to it.
Also, this function will return a value, so store this back function call back to a new variable.
Create a function called eliminate and create a variable to use as the parameter:
Inside the function, randomly shuffle (use the shuffle() method) all the values in the list (you will need to import random at the top of the program)
Then using a for loop, loop it as many times as the value that was passed to the function:
Inside the for loop, remove one name from the list (use the pop() method)
Outside the for loop, but still inside the function, return the list of remaining people
Underneath where you left off in step 8, print the remaining people that are left: those that did not get voted off the island.
WILL GIVE BRAINIEST!
Answers
Answer:
#################
# Python Practice
#################
# Part 1
# ------------------------------------------------------
run_compare = 3
ran_compare = 0
while run_compare != ran_compare:
num1 = int(input('Please input the first number: '))
num2 = int(input('Please input the second number: '))
def compare(number1, number2):
if number1 < number2:
print(f'{num1} is less than {num2}')
elif number1 > number2:
print(f'{num1} is greater to {num2}')
else:
print(f'{num1} is equal than {num2}')
compare(num1, num2)
ran_compare += 1
# ------------------------------------------------------
# Part 2
run_name = 6
ran_name = 0
names = []
# ------------------------------------------------------
while run_name != ran_name:
name = input(str('Please insert a name: '))
names.append(name)
print(names)
ran_name += 1
# ------------------------------------------------------
give me a second im going to resolve the last part but this is what i have so far
Following are the program to the given question:
Program Explanation:
Import random package as r.Defining a method "compare" that takes two variable "n1,n2" inside the parameter.In the next step, a conditional statement is declaed that checks the parameter value and prints its value. Defining a method "eliminate" that takes two variable "n, names" inside the parameter.It calls the shuffle method, and define a for loop that removes names value and return its value.In the next step, a for loop is defined inside this two variable "i1, i2" is declared that inputs value and calls the comapre value.In the next line, an empty list "names" is declared inside this a for loop is defined that inputs name value and calls the "eliminate" method and print its calculated value.Program:
import random as r#import package random
def compare(n1, n2):#defining a method compare that takes two parameters
if n1<n2:#defining if block that checks n1 value less than n2 value
print("{} is less than {}".format(n1, n2))#print value with the message
elif n2<n1:#defining if block that checks n2 value less than n1 value
print("{} is less than {}".format(n2, n1))#print value with the message
else:#defining else block
print("{} and {} are equal".format(n1, n2))#print value with the message
def eliminate(n, names):#defining a method eliminate that takes two parameters
r.shuffle(names)#calling the shuffle method
for i in range(n):#defining a for loop that checks n values
names.pop()#calling pop method to remove value
return names #return a names value
for i in range(3):#defining a for loop that inputs value
i1 = int(input("Enter an integer: "))#defining i1 value to input value
i2 = int(input("Enter another integer: "))#defining i2 value to input value
compare(i1, i2)#calling the compare method
print()#using print to break line
names= [] #defining an empty list
for i in range(6) :#defining a loop that inputs name value
name = input("Enter name: ")#defining name variable that inputs value
names.append(name)#calling append method
n = int(input("\nHow many people you would like to vote off the island: "))#defining n variable that input value
new_names = eliminate(n, names)#defining new_names that calling eliminate method
print("\nRemaining people that did not get voted off the island:")#print message
if(len(new_names) != 0):#defining if block that checks new_names length not equal to 0
for name in new_names:#defining a for loop that checks name is in new_names
print(name)#print name value
else:#defining else block
print("None")#print message None
Output:
Please find the attached file.
Learn more:
brainly.com/question/21922031
If any one has mincraft on ps4 bedrock we can finish building a BIG city world all we need to put is a shop and money dispensers thx
Answers
Answer:
cool i want a ps5
Explanation:
what type of computer is an ATM attached to ?
Answers
If this doesn’t help lmk I can add something else
For all programs, you should write a small amount of code and _______
it before moving on to add more code?
Answers
Answer:
test
Explanation:
One newly popular development paradigm is "test-driven development"; which borrows agile engineering principles in architecting project components.
Which of the following calculates to 10?
3*(6+2/2)
(3* 6) + 2/2
(3* 6+ 2)/2
3*6+2/2
Answers
Answer:
C. (3* 6+ 2)/2
Explanation:
Arithmetic operation are performed sequentially using the rule known as bracket of division, multiplication, addition and subtraction (BODMAS).
(3* 6 + 2)/2
Simplifying the above mathematical expression, we have;
(18 + 2)/2
= 20/2 = 10
If you need to change the typeface of a document, which menu will you choose?
Answers
Format menu
Format menu is used to change typeface of a document
When save a newly created template, you use which extension for the file type? .doc, .docx, .doct, .dotx?
Answers
Answer:
The main difference between the two file formats is that in DOC, your document is saved in a binary file that includes all the related formatting and other relevant data while a DOCX file is actually a zip file with all the XML files associated with the document.
Write a program that reads a list of integers into a list as long as the integers are greater than zero, then outputs the smallest and largest integers in the list.
Ex: If the input is:
10
5
3
21
2
-6
the output is:
2 and 21
Answers
n = 1
lst = []
while n > 0:
lst.append(n := int(input()))
lst.pop(-1)
print(str(min(lst)) +" and "+str(max(lst)))
I wrote this code in python 3.8. I hope this helps
If there is a need to write code in order to help the player move through the game, which team member would create this code?
Answers
Answer:
the main programmer
Explanation:
or the person who studies the algorithm and writes the code
hence, the programmer or main programmer
A software engineer is somebody who develops, creates, maintains, tests, and evaluates software using principles of software development. The term "programmer" is sometimes used as a synonym, although it may also imply a lack of engineering degrees or abilities.
Software developers, sometimes known as software architects, collaborate closely with clients to plan and develop software. Most software engineers do not start coding, they do establish a strong foundation in programming skills in order to communicate successfully with programmers.It must cover the full software development, commencing with only an analysis of the needs and ending with the design, test, and development of the technology to suit these goals.Therefore, the answer is "Software Engineer".
Learn more:
brainly.com/question/23661471
Which line of code will move the raft to the Skykomish River?
class raft:
def __init__(self,capacity):
self.capacity = capacity
self.location = 'Gauley'
self.repairs = []
def moveRaft(self, newLocation):
self.location = newLocation
myRaft = raft(30)
A. myRaft.moveRaft(self,'Skykomish')
B. myRaft.moveRaft('Skykomish')
C. moveRaft('self, Skykomish')
D. myRaft.moveRaft() = 'Skykomish'
Answers
Answer:
myRaft.moveRaft('Skykomish')
Explanation:
myRaft = raft(30)
myRaft.moveRaft('Skykomish')
If you add the following line, you can see that the raft is now located on the Skykomish River.
myRaft.moveRaft('Skykomish') is the line of code will move the raft to the Skykomish River. Hence, option B is correct.
What is Skykomish River?Given that the North and South Forks of the Skykomish Rivers pass through it, the Upper Sky Valley is a canoeist and angler's dream. The Sky Valley's world-class whitewater rapids are a great option if you're searching for a wilder ride than floating around or wading into many fishing holes.
The Skykomish River will be navigable from its mouth to the point where its north and south forks meet. There will be no impediments in the Snoqualmie River from its mouth to Snoqualmie Falls. As long as the fishery is open, which is anticipated to last until anglers are allowed to keep up to two coho salmon that are at least 12 inches in length.
Thus, option B is correct.
For more information about Skykomish River, click here:
https://brainly.com/question/29104642
#SPJ2
What is a segment?
1. a set of data or information
2. the main piece of cable in the network
3. a piece of hardware connecting pieces of cable
4. a length of uninterrupted cable connecting two devices
Answers
Hope this helps!!
The New Slide command on the Ribbon lets you choose ________.
Question 3 options:
slide dimensions
print settings
slide layouts
transitions
Answers
Answer: slide layouts
Explanation:
Just took the test hope this helps ❤️✨
The New Slide command on the Ribbon lets you choose slide layouts. Thus, option C is correct.
What is New Slide?
Make your arrangement selection in the New Slide message box for your new presentation. Study slide layouts in more detail. Choose Add Slide. That new slide has now been added, allowing you to start adding information by clicking within a placeholder.
You may select slide patterns using Ribbon's New Slide command. To have the new slide display just below the selected slide there in the slide window, click on that slide. On the Insert tab, in the Slides grouping, choose the New Slide option.
The fresh slide needs to be displayed beneath the current slide. Select the initial of the two rolls and initiatives Slide to insert a new slideshow seen between existing ones. Therefore, option C is the correct option.
Learn more about New Slide, here:
https://brainly.com/question/1372598
#SPJ2
Explain the consequences of using bits to represent data.
Answers
Answer:
Each description of a PC needs to clarify how the PC handles data: numbers, text, pictures, sound, films, directions.
Using bits to represent data implies that the computer has to use a lot of memory since every character has a group of bits representing it.
The PC is an electronic gadget. Every one of its wires can either convey electric flow or... not convey current. Thus, similar to a light switch, it sees just two states. Incidentally, this is sufficient to make the entire thought work. Indeed, any framework that can speak to in any event two states can speak to data. Take, for instance, the Morse code that is utilized in telecommunication. Morse is a sound transmission framework that can convey a short signal (spoke to by a dab) and a long beeeeeep (spoke to by a scramble). Any letter or number can be spoken to by a mix of these two images. Snap here to see a Morse interpreter.
Explanation:
Essentially with PCs. To speak to a number, we utilize the parallel number-crunching framework, not the decimal number framework that we use in regular day to day existence. In the double framework, any number can be spoken to utilizing just two images, 0 and 1. (Morse is nearly, yet not exactly (because of the delays between letters) a paired framework. A framework firmly identified with Morse is utilized by PCs to do information pressure (more about this later).
A bit which is also called a binary digit is the smallest unit of data. A combination of two or more bits is regarded as bytes.
A bit is usually processed by the electrical parts of a computer system. Internet speed is measured in bits and it reflects two opposite commands which could be either yes/no , on/off etc.
The consequence of using bit to represent data is due to the advantages which includes:
Easy computation : Due to the simplicity and it involving less complex calculations, the bits gives room for less errors.Ease of Coding: The bits is the simplest and smallest unit of data which makes it less stressful when used in coding operations.Ease of Operation: Devices which operates with the bits system makes it easier for humans to operate when compared to other complex forms.Read more on https://brainly.com/question/19667078
What is the name of the tab that becomes available after you add and select an image in your PowerPoint presentation?
Home
Insert
Picture
View
ASAP PLS
Answers
Answer:
INSERT
Explanation:
INSERT PCIURE
write algorithm and flowchart to calculate sum,difference, product and quotient of two integer number given by the user.
Answers
Answer:
Step1: Start
Step2: Initialize the count variable to zero
Step3: Initialize the sum variable to zero
Step4: Read a number say x
Step 5: Add 1 to the number in the count variable
Step6: Add the number x to the sum variable.
Step7: Is the count variable in the memory greater than 50?
If yes, display the sum: go to step 8.
If No, Repeat from step 4
Step8: Stop
Explanation:
Given all of the limitations of MBR, is it still relevant in current day use?
Answers
Explanation:
MBR does have its limitations. For starters, MBR only works with disks up to 2 TB in size. MBR also only supports up to four primary partitions—if you want more, you have to make one of your primary partitions an “extended partition” and create logical partitions inside it.
What’s the term for a current flow in which electrons move in one direction
Answers
Answer:
Direct Current
Explanation:
MARK ME BRAINLIEst pls
Kevin needs to get his data from a database into a text file to send to another group. He needs to _____.
A. export
B. sort
C. link
D. import
Answers
I got it right on test
Answer:
pretty sure that it would be A. Export :)
----------------------------------------------------------------------------------------------------------------
Explanation:
Because B and C don't make too much sense, and D would mean to 'bring in' and A means the opposite, which is take out.
What do you understand by storage devices ? Name any two storage devices.
Answers
Answer:
Types of storage devices
Primary Storage: Random Access Memory (RAM) Random Access Memory, or RAM, is the primary storage of a computer. ...
Secondary Storage: Hard Disk Drives (HDD) & Solid-State Drives (SSD) ...
Hard Disk Drives (HDD) ...
Solid-State Drives (SSD) ...
External HDDs and SSDs. ...
Flash memory devices. ...
Optical Storage Devices. ...
Floppy Disks.
Answer:
this are the 2 examples of storage device
Hard Disk Drives (HDD)
Solid-State Drives (SSD)
Explanation:
basically storage device is a piece of hardware that is primarily used for storing data.
I hope it helps mate
mark me brainliest plsss
I will always help you understanding your assingments
have a great day
#Captainpower :)
A(n) __________ records the activities of computer operators surrounding each event in a transaction.
A. threat analysis
B. audit trail
C. DNA profile
D. expert systems analysis
Answers
Answer:
B. audit trail
Explanation:
A(n) audit trail records the activities of computer operators surrounding each event in a transaction.
Jordan uses a spreadsheet to keep track of how many hits each player on a baseball team has had in each game
throughout the season. For every game, each player's name appears in a column that Jordan has titled "Player."
Next to that, a column titled "Hits" shows the number of hits for each player in a single game.
What function should Jordan use to find the average number of hits per game for player A_Clemente?
O SUMIF(Hits, "A Clemente", Player)
O SUMIF(Player, "A Clemente". Hits)
O AVERAGEIF(Hits, "A Clemente", Player)
O AVERAGEIF(Player,"A_Clemente", Hits)
Answers
Answer:
AVERAGEIF(Player, "A_Clemente", Hits)
Explanation:
The AVERAGEIF function allows users to calcule the mean value of numerical columns while also Given certain constraints within a single function call. The AVERAGEIF takes in 3 arguments.
The first is a column which houses the range of the constraint we would like to apply on our function.
The second argument is the constraint itself which should reside within the values in the range defined in the first argument.
The third argument is the numerical column whose average is calculated based on the defined constraint.
Therefore, in the scenario above, Player is the column containing player names, which it's value will later be used as a constraint
"Clemente_A" the constraint, only values pertaining to Clemente_A will be defined.
Hits, the numeric column whose value is averaged based on the constraint given.
Any one know 23 24 25?
Answers
24- C
25- i’m not sure what it is but the definition to it is that it represents a range of text that has been deleted from a document. so which ever one is closest to it.
What is the best approach to testing a website? visit all pages to verify that they load visit every page and verify all links visit the pages with hyperlinks visit all pages that appear on the navigation menu
Answers
Answer:
B. visit every page and verify all links
Explanation:
I just took the test, and only one year late.
Answer:
THe answer s b
Explanation:
write a an algorithm to find out volume?
Answers
Define the radius of the sphere.
Define the pie and assign (22/7)
Calculate the volume of the sphere as (4/3)*pie*r3
Assign the volume of the sphere to volume_of_sphere.
Print the volume of the sphere.
April is worried that she is not a "good speller" so she plans to let the spelling checker correct all her mistakes. What would be the most helpful advice for April?
Answers
Answer:
Likely, the best option would be to use the "auto-correct" function found on Microsoft Word or Google Docs. There are other forms of spell-checking such as Grammarly or by using a dictionary.
Explanation:
They have tools meant for checking for grammatical errors and can be used to better enhance your overall writing.
Explain to Alana why she might not want to blast her boss on social media just yet.
Answers
Answer: She might get fired. And who knows, if she doesn't, she might get a raise!
If I want to control the aperture and I want the camera to control the shutter speed which setting on the mode dial is most appropriate?
a)AV
b) TV
c) M
d) P
since this is my last question im giving 100 points and brainliest
Answers
Answer:
answer is a
hopes this helps
The Register Set that stores temporary results related to the computations are
Answers
Answer:
ooh Bhai sahab
Explanation:
ooh Bhai Yaar Mata tyo gari sanisanisanisani
The U.S. military's standard for computer security is known as
DCS-3000.
TEMPEST.
Daubert standard.
Carnivore.
Answers
daubert answer lllllllll
explain the major innavotions made from the establishment of abacus
Answers
Answer:
The abacus is one of many counting devices invented to help count large numbers.
Explanation: