This diagram shows two different forces acting on a skateboarder. The
combined mass of the skateboard and the person is 81.5 kg. Based on this
information, what is the acceleration of the skateboarder?
Air resistance = 11.40 N
mi
Applied force = 52.80
A. 0.51 m/s2 to the left
O B. 1.94 m/s2 to the right
O C. 1.94 m/s2 to the left
O D. 0.51 m/s2 to the right

Answer:

Kindly check the explanation section.

Explanation:

For the design we are asked for in this question/problem there is the need for us to calculate or determine the strength in fracture and that of the yield. Also, we need to calculate for the block shear strength.

From the question, we have that the factored load = 500kips. Also, note that the tension splice must not slip.

Also, the shear force are resisted by friction, that is to say shear resistance = 1.13 × Tb × Ns.

Assuming our db = 3/4 inches, then the slip critical resistance to shear service load = 18ksi(refer to AISC manual for the table).

If db = 7/8 inches, then the shear force resistance for n bolt = 10.2kips, n > 49.6.

The yielding strength = 0.9 × Aj × Fhb= 736 kips > 500

The fracture strength = .75 × Ah × Fhb = 309 kips.

The bearing strength of 7/8 inches bolt at the edge hole and other holes = 46 kips and 102 kips.

Answer:

4.63rad/s

Explanation:

The centripetal force is expressed as;

F = mv²/r

M is the mass of the disk = 8kg

v is the linear speed = wr

r is the radius = 0.21m

Force = 36N

Write the force in term of the angular velocity

F = m(wr)²/r

F = mw²r²/r

F = mw²r

36 = 8w²(0.21)

36 = 1.68w²

w² = 36/1.68

w² = 21.43

w = √21.43

w = 4.63rad/s

Hence the angular speed is now 4.63rad/s

Answer:

881.84905 LBS

Explanation:

ThErE :p

3922.66 newtons.

This is an exact amount, to get newtons form kg, multiply by 9.8, or in this case, 10.

This gives you 4000 newtons

Answer:You need to give more explanation sorry

Explanation:

Answer:

4.20 seconds

Explanation:

Supposing that silly goose weighs 69 pounds, we need to start on the math.

Simple maths, truly and really. 69/1=69, of course.

Therefore it will take 4.20 seconds for silly goose to hit the ground. if he is going to be a silly goose though, he can just go in the pond, instead of wasting his time.

Answer:

Correct choice: D. Object A is the fastest

Explanation:

In a distance vs time graph, the distance is plotted vertically, and the time is plotted horizontally.

The diagram shows three graphs of objects A, B, and C.

The graph of A shows the object traveled 12 meters in 3 seconds, for a speed of 12/3= 4 m/s.

The graph of B shows the object traveled 8 meters in 4 seconds for a speed of 8/4=2 m/s.

Finally, the object C travels 4 meters in 4 seconds, for a speed of 4/4= 1 m/s

Thus, the fastest object is A.

Answer:

ns for high-speed rail in the United States date back to the High Speed Ground Transportation Act of 1965. Various state and federal proposals have followed. Despite being one of the world's first countries to get high-speed trains (the Metroliner service in 1969), it failed to spread. Definitions of what constitutes high-speed rail vary, including a range of speeds over 110 mph (180 km/h) and dedicated rail lines. Inter-city railwith top speeds between 90 and 125 mph (140 and 200 km/h) is sometimes referred to in the United States as higher-speed rail.[1]

Amtrak's Acela Express (reaching 150 mph, 240 km/h), Silver Star, Northeast Regional, Keystone Service, Vermonter and certain MARC Penn Line express trains (all five reaching 125 mph, 201 km/h) are the only high-speed services in the country.

As of 2020, the California High-Speed Rail Authority is working on the California High-Speed Rail project and construction is under way on sections traversing the Central Valley. The Central Valley section is planned to open in 2029 and Phase I is planned for completion in 2031.[2]

Contents

1 Definitions in American context

2 History

2.1 Faster inter-city trains: 1920–1941

2.2 Post-war period: 1945–1960

2.3 First attempts: 1960–1992

2.4 Renewed interest: 1993–2008

2.5 Plans for 2008–2013

3 Current state and regional efforts

3.1 The Northeast

3.1.1 Northeast Corridor: Next Generation High-Speed Rail

3.1.1.1 Proposed routes

3.1.2 Northeast Maglev proposal

3.1.3 New Jersey–New York City upgrades

3.1.4 New York

3.1.5 Pennsylvania

3.2 Western States

3.2.1 California

3.2.2 Pacific Northwest

3.2.3 Arizona

3.3 Mid-Atlantic and the South

3.3.1 Florida

3.3.2 Southeast

3.3.3 Texas

3.4 Midwest

3.4.1 Illinois and the Midwest

3.5 The Southwest

4 Federal high-speed rail initiatives

4.1 American Recovery and Reinvestment Act of 2009

4.1.1 Strategic plan

4.2 2009 federal grant funding

4.3 2010 allocation

4.3.1 Cancellation of funds for Wisconsin, Ohio, and Florida

4.4 2011 and 2012 proposals and rejections of funding

5 See also

6 Notes

7 Further reading

8 External links

Explanation:

An open cluster is a group of up to a few thousand stars that were formed from the same giant molecular cloud, and are still loosely gravitationally bound to each other. In contrast, globular clusters are very tightly bound by gravity. ... Open clusters are very important objects in the study of stellar evolution.

Answer:

1>500gf

1>300gf

its answer

Answer:

Explanation:

Find the complete question attached

Using the principle of moment

Clockwise moment = Anticlockwise moment

AntiClockwise moment = M × 2.0

ACW moment = 2M

Clockwise moment = 40×4

Clockwise moment = 160kgcm

Equate both expression and calculate M

2M = 160

M = 160/2

M = 80kg

Hence the mass of his friend is 80kg

Answer:

just as rea was situated at a distance in picture and a half dozen years old in his first comment in picture the actor was the first thing he had ever heard about it he reati was the only person who has

Explanation:

plz help you get the best in your house but muje has been in a relationship since the last

Answer:

Although you may not typically think of the skin as an organ, it is in fact made of tissues that work together as a single structure to perform unique and critical functions. The skin and its accessory structures make up the integumentary system, which provides the body with overall protection. The skin is made of multiple layers of cells and tissues, which are held to underlying structures by connective tissue (Figure 5.1.1). The most superficial layer of the skin is the epidermis which is attached to the deeper dermis. Accessory structures, hair, glands, and nails, are found associated with the skin. The deeper layer of skin is well vascularized (has numerous blood vessels) and is superficial to the hypodermics. It also has numerous sensory, and autonomic and sympathetic nerve fibers ensuring communication to and from the brain.

Explanation:

Describe the layers of the skin and the functions of each layer

-Identify the components of the integumentary system

-Describe the layers of the skin and the functions of each layer

-Describe the layers of the epidermis and dermis

-Identify and describe the hypodermis and fascia

-Describe the role of keratinocytes and their life cycle

-Describe the role of melanocytes in skin pigmentation

By cooling down the food, the thermal energy in the food molecules is reduced.

A refrigerator is an appliance that is commonly used in the home for the purpose of cooling down a substnace especially water and drinks.

Due to the fact that the molecules that compose matter are is in a state of constant random motion, the food molecules contain thermal energy. Hence, by cooling down the food, the thermal energy in the food molecules is reduced.

Learn more about thermal energy: https://brainly.com/question/11278589

Answer:

2 and 8

Explanation:

please mark me brainiest I would really appreciate it.

This question is incomplete, the complete question is;

A block of mass m begins at rest at the top of a ramp at elevation h with whatever PE is associated with that height. The block slides down the ramp over a distance d until it reaches the bottom of the ramp.

How much of its original total energy (in J) survives as KE when it reaches the ground? m = 9.9 kg h = 4.9 m d = 5 m μ = 0.3 θ = 36.87°

Answer:

the amount of its original total energy (in J) that survives as KE when it reaches the ground will is 358.975 J

Explanation:

Given that;

m = 9.9 kg

h = 4.9 m

d = 5 m

μ = 0.3

θ = 36.87°

Now from conservation of energy, the energy is;

Et = mgh

we substitute

Et = 9.9 × 9.8 × 4.9

= 475.398 J

Also the loss of energy i

E_loss = (umg cosθ) d

we substitute

E_loss  = 0.3 × 9.9 × 9.8 × cos36.87°  × 5

= 116.423 J

so the amount of its original total energy (in J) that survives as KE when it reaches the ground will be

E = Et - E_loss

E = 475.398 J - 116.423 J

E = 358.975 J

Answer:

The magnitude of the net force acting on an object is equal to the mass. and the direction is in 20N

Explanation:

This question is incomplete, the complete question is;

A gong makes a loud noise when struck. The noise gradually gets less and less loud until it fades below the sensitivity of the human ear. The simplest model of how the gong produces the sound we hear treats the gong as a damped harmonic oscillator. The tone we hear is related to the frequency f of the oscillation, and its loudness is proportional to the energy of the oscillation.

If the loudness drops to 90 % of its original value in 5.0 s , what is the time constant of the damped oscillation

Answer: the time constant of the damped oscillation is 47.44s

Explanation:

Given that;

t = 5.0s

Lets say Ao is the amplitude of initial loudness and later A(t) = 0.9 Ao

EXPRESSION for amplitude is  A(t) = Ao e^-t / T

t is time while T is time constant

so

0.9Ao = Ao e^-t / T  

0.9 = e^ -t/T

So we take the natural log of both the sides

ln (0.9) = -t/T

-0.1054 =  -t/T

0.1054 =  t/T

WE now substitute our value of t

0.1054 =  t/T

0.1054T =  5.0

T = 5 / 0.1054

T = 47.44s

therefore the time constant of the damped oscillation is 47.44s

Answer:

Sigmund Freud

Explanation:

Answer:

Wilhelm Wundt

Answer:

35.35 m

Explanation:

The following data were obtained from the question:

Initial velocity (u) = 20 m/s

Angle of projection (θ) = 30°

Acceleration due to gravity (g) = 9.8 m/s²

Range (R) =.?

The range (i.e how far away) of the ball can be obtained as follow:

R = u² Sine 2θ /g

R = 20² Sine (2×30) / 9.8

R = 400 Sine 60 / 9.8

R = (400 × 0866) / 9.8

R = 346.4 / 9.8

R = 35.35 m

Therefore, the range (i.e how far away) of the ball is 35.35 m

Complete Question:

A pilot drops a package from a plane flying horizontally at a constant speed. Neglecting air resistance, when the package hits the ground the horizontal location of the plane will

A. be behind the package.

B. be over the package.

C. be in front of the package.

D. depend on the speed of the plane when the package was released.

Answer:

B.

Explanation:

As no other horizontal forces are present, due to the horizontal movement and the vertical one are independent each other (as they are perpendicular), the plane and the package continue moving horizontally at the same speed, so when the package hits the ground (due to the action of gravity in the vertical direction only) the plane will be exactly over the package.

The package hits the ground in such a way that the plane will be exactly over the package.

The given problem is based on the effect of air resistance on the motion of object. The resistive force exerted on any object on account of dust, and other air particles is known as air resistance or simply as air drag.

In the given problem, as no other horizontal forces are present, due to the horizontal movement and the vertical one are independent each other (as they are perpendicular), the plane and the package continue moving horizontally at the same speed.

So when the package hits the ground (due to the action of gravity in the vertical direction only) the plane will be exactly over the package.

Thus, we can conclude that the package hits the ground in such a way that the plane will be exactly over the package.

Learn more about the air drag here:

https://brainly.com/question/14755232

Answer:

Hello your question is incomplete attached below is the complete question

answer : 49 seconds

Explanation:

considering only Hysteresis loss

we have to calculate the Area affected/under the  Hysteresis loss

= volume * area

= 4 * ( 1.5 * 20 ) =  120 tesla. A/m

next we calculate the volume of the material

= mass of material / density

= 500 grams / 7.9 g/cm^3  = 6.33 * 10^-5 m^3

next we calculate the heat lost per cycle

= 6.33 * 10^-5 m^3 * 120 = 0.007596 joules

The total heat required to raise  temperature by 1°c

= Cp * ΔT * n

= 3R * n * ΔT  = 3(8.314) * 8.95 * 1  = 223.23 Joules

where n = number of moles = 500grams / 55.85 = 8.95moles

ΔT = 1

Therefore the time required to have to operate at a frequency of 60 cps

= Total heat required  / heat lost per cycle

=( 223.23 / 0.007596 ) 60 cps

= 489.796 seconds ≈  49 seconds

Answer:

communication, if you don't talk you'll never know what's going on.

Explanation:

Answer:

The electric potential energy of the system is 7.87x10⁻²⁰ J.

Explanation:

The electric potential energy is given by:

[tex]E = \int{Fdr} = \frac{Kq_{1}q_{2}}{r}[/tex]

Where:

q₁ = q₂ is the charge of the protons = 1.62x10⁻¹⁹ C

r is the distance = 3x10⁻⁹ m

K: is the electrostatic constant = 9x10⁹ Nm²/C²

[tex] E = \frac{Kq_{1}q_{2}}{r} = \frac{9\cdot 10^{9} Nm^{2}/C^{2}*(1.62 \cdot 10^{-19} C)^{2}}{3\cdot 10^{-9} m} = 7.87 \cdot 10^{-20} J [/tex]

Therefore, the electric potential energy of the system is 7.87x10⁻²⁰ J.

I hope it helps you!

The electric potential energy of the system should be 7.87x10⁻²⁰ J.

SInce We know that

fdr = kq1q2/r

Here

q₁ = q₂ i.e. is the charge of the protons = 1.62x10⁻¹⁹ C

r should be the distance = 3x10⁻⁹ m

K should be the electrostatic constant = 9x10⁹ Nm²/C²

Now electric potential energy should be

= (9x10⁹ Nm²/C² * 1.62x10⁻¹⁹ C) /  3x10⁻⁹ m

=  7.87x10⁻²⁰ J.

hence, The electric potential energy of the system should be 7.87x10⁻²⁰ J.

learn more about energy here: https://brainly.com/question/17384612

This question is incomplete, the complete question is;

Two blocks, M1M1 and M2,M2, are connected by a massless string that passes over a massless pulley as shown in the figure. M2,M2, which has a mass of 25.0 kg,25.0 kg, rests on a long ramp of angle =25.0∘.θ=25.0∘. Friction can be ignored in this problem.

Determine the mass 1m1 of block M1M1 for which the two blocks are in equilibrium (no acceleration).

Answer:

the mass m1m1 of block M1M1 for which the two blocks are in equilibrium (no acceleration) is 10.57 kg

Explanation:

Given that;

m₂ = 25 kg

θ = 25°

Now at equilibrium, T = m₁g ------------------lets say equ 1

and also T = m₂gsinθ

therefore

m₁g = m₂gsinθ

m₁ = m₂sinθ

so we substitute

m₁ = 25 × sin(25)

m₁ = 25 × 0.4226

m₁ = 10.565 ≈ 10.57 kg

therefore the mass m1m1 of block M1M1 for which the two blocks are in equilibrium (no acceleration) is 10.57 kg

Answer:

South pole

Explanation:

In a bar magnet, field lines go from the North Pole to the South Pole (outside the magnet).

As the earth magnetic field lines go from South Pole (geographic) to the North one, this means that the North pole (geographic) really behaves as a South Pole (magnetic).

Answer:

A. decantation and screening

Explanation:

Decantation is the one of the process of separating the mixture. In this process the precipitated liquid is separated from the solid. According to the given instruction for the recipe, the fat which is in liquid state is separated from meat. In the process of screening, more liquid is separated by placing the mixture on the screen. Here, the gravity plays an important role for the process of separation.  

Answer:

a

Explanation:

Answer:

N2 + 3H2 ----->  2NH3

Explanation:

Reactants side:

2 Nitrogen

5 Hydrogen

Products Side:

2 Nitrogen

5 Hydrogen

Answer:

the box is going south at 10n

Explanation:

Answer:

Pressure increases as you move deeper below earth's surface.

Tempurature  increases as you move deeper below earth's surface.

Hope this helps!

Explanation:

Answer:

It is independent of the path of the body and depends only on the starting and ending points.

Explanation:

In Physics we define a conservative force as a force that is independent of the path of the body and depends only on the starting and ending points.

For conservative forces we can write;

KEi + PEi = KEf +PEf

where;

KEi= initial kinetic energy

PEi= initial potential energy

KEf= final kinetic energy

PEf= final potential energy

This equation is known as the principle conservation of mechanical energy . It applies only to conservative forces where friction is negligible. The term KE + PE  is also known as the total mechanical energy of the system.

Answer:

I=10.0A

Explanation: