These diagrams show two atoms of fluorine and an atom of magnesium.

On the left, a purple circle labeled F is shown twice, both times surrounded by 2 concentric circles. The inner circle has 2 small green spheres. The outer circle has 7 small green spheres. On the right, a purple circle labeled M g surrounded by 3 concentric circles. The inner circle has 2 small green spheres. The middle circle has 8 small green spheres. The outer circle has 1 small green sphere.
Which shows the correct steps in the formation of an ionic bond between these atoms?

A magnesium atom accepts six electrons from the fluorine atoms → Each fluorine atom donates three of the electrons → The magnesium atom becomes a -2 ion → Each fluorine atom becomes a +1 ion
A magnesium atom donates two electrons to the fluorine atoms → Each fluorine atom accepts one of the electrons → The magnesium atom becomes a -2 ion → Each fluorine atom becomes a +1 ion
A magnesium atom accepts two electrons from the fluorine atoms → Each fluorine atom donates one of the electrons → The magnesium atom becomes a -2 ion → Each fluorine atom becomes a +1 ion
A magnesium atom donates two electrons to the fluorine atoms → Each fluorine atom accepts one of the electrons → The magnesium atom becomes a +2 ion → Each fluorine atom becomes a -1 ion

Answer: White bread

Explanation:

There are 20 electrons in the cyclobutadiene molecule shown in the image.

Cyclobutadiene is a molecule that contains 4 carbon atoms and 4 hydrogen atoms. The chemical formula for cyclobutadiene is C4H4. It is a highly reactive molecule and is unstable in its pure form. It has a square planar shape, and each carbon atom is bonded to two neighboring carbon atoms and one hydrogen atom.

Each carbon atom in cyclobutadiene has four valence electrons, and each hydrogen atom has one valence electron. Valence electrons are the outermost electrons in an atom and are involved in chemical bonding. The number of valence electrons in an atom is determined by the group number in the periodic table.

Carbon is in group 14, so it has 4 valence electrons. Hydrogen is in group 1, so it has 1 valence electron. The total number of valence electrons in cyclobutadiene is calculated by adding the valence electrons of all the atoms.

4 carbon atoms x 4 valence electrons per carbon atom = 16 valence electrons4 hydrogen atoms x 1 valence electron per hydrogen atom = 4 valence electrons Total number of valence electrons = 16 + 4 = 20Therefore, there are 20 electrons in the cyclobutadiene molecule shown in the image.

To know more about cyclobutadiene molecule refer here: https://brainly.com/question/28178372#

#SPJ11

Answer:

D

Explanation:

With the collision, obviously Ball 2's velocity increased, while Ball 1 slowed down a little bit due to the impact. This decrease in velocity caused a decrease in Ball 1's Momentum. Satisfying both conditions, option D is right.

Answer:

60.0g Na2SO4

Na2SO4 molar mass 142.04g

divide 60.0 by 142.02

And you get the answer .422moles Na2SO4

let me know if you need more explanation

Option B is correct. benzene (C6H6). Pentane is an aliphatic hydrocarbon with only nonpolar C-C and C-H bonds, making it a nonpolar solvent. Its chemical formula is C₅H₁₂.

Benzene (C₆H₆) is also a nonpolar compound, consisting of a hexagonal ring of carbon atoms with hydrogen atoms attached. The carbon-carbon (C-C) bonds and carbon-hydrogen (C-H) bonds in benzene are nonpolar, resulting in a nonpolar molecule.

On the other hand, pentanol (C₅H₁₁OH), acetic acid (C₂H₄O₂), and ethyl methyl ketone (C₄H₈O) contain polar functional groups such as hydroxyl (-OH), carboxyl (-COOH), and carbonyl (-CO-) groups, respectively. These polar functional groups create polarity within the molecules.

Read more on Benzene here https://brainly.com/question/14788042

#SPJ4

Answer:

Decomposition Reaction

Explanation:

Ba(NO₃)₂(s) ⇒ BaO(s) + N₂(g) + 3 O₂(g)

Barium nitrate decomposes into the chemical species that were used to create it.

Answer:

Potassium

Explanation:

Most reactive metal in the reactivity series

The element in the question is referred to the alkali metal which is known as Potassium

Potassium is a highly reactive metal and reacts with Hydrochloric acid to

form a salt known as Potassium chloride and hydrogen gas.

Hcl + K ⇒ Kcl₍s₎ + H₂₍g₎

Potassium has a white color but when it reacts with water it explodes and

gives out a purple-red color as a result of the high excitation of electrons.

Read more on https://brainly.com/question/22993452

Answer: There is no eclipse. However, two or four times a year, the Moon travels through some portion of the Earth's penumbral or umbral shadows, resulting in one of the three types of eclipses mentioned above. When the Moon crosses between the Earth and the Sun, this occurs. This is only possible when the Moon is in its New Moon phase.

Explanation:

HOPE THIS HELPS!!! : )

Explanation:

molarity = no. of moles of solute/solution in litres

molarity =0.202/7.98

=0.025 M

Answer:

100gmol

Explanation:

In the neutralization reaction, the Brønsted-Lowry conjugate acid-base pairs are the acid HCl and the base OH- as well as the acid H₂O and the base Cl-.

The neutralization reaction involves the formation of two Brønsted-Lowry conjugate acid-base pairs. The acid-base pairs are HCl (acid) and OH⁻ (base), as well as H₂O (acid) and Cl⁻ (base). In this reaction, the acid donates a proton (H+) to the base, resulting in the formation of water and a salt. HCl donates a proton to OH- to form water, while H₂O donates a proton to Cl⁻ to form hydrochloric acid (HCl). The transfer of protons between the acid and base creates the conjugate acid-base pairs.

Brønsted-Lowry acid-base theory describes the transfer of protons (H+) between acids and bases. Acids are proton donors, while bases are proton acceptors. In a neutralization reaction, an acid reacts with a base to form a salt and water.

The acid donates a proton to the base, forming a conjugate base, while the base accepts the proton, forming a conjugate acid. In the given neutralization reaction, HCl is the acid and OH- is the base, forming water. Simultaneously, H₂O acts as an acid, donating a proton to Cl⁻, which acts as a base, forming HCl. Understanding conjugate acid-base pairs is essential in comprehending acid-base reactions and their equilibrium.

Learn more about: Neutralization reaction

brainly.com/question/27745033

#SPJ11

Answer:

1CH₄ + 2O₂ -> 1CO₂ + 2H₂O

Explanation:

Reactants:

1 C

4 H

4 O

Products:

1 C

4 H

4 O

The equation is balanced.

Answer: 2556.455 J/(kg.°C)

Explanation:

Im assuming the 148.20 is in grams

The equation is Q=mcΔT

Q= Heat (J)

m= Mass

c= SHC (specific heat capacity)

ΔT= Temp change

Answer:

Energía geotérmica (calor → energía eléctrica) Motores térmico, como el motor de combustión interna utilizado en automóviles o el motor de vapor (calor → energía mecánica) Energía térmica oceánica (calor → energía eléctrica) Represas hidroeléctricas (energía potencial gravitacional → energía eléctrica)

Explanation:

Answer:

One type of energy can change into another type of energy. Energy transformation means the changing of energy from one type to another, e.g. from kinetic energy to electrical energy, or from potential energy to kinetic energy.

Explanation:

Answer:

A. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

B. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

C. Particle emitted = beta particles; protons gained = 1; Change in mass = 0

D. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

E. Particle emitted = gamma ray; protons gained = 0; Change in mass = 0

F. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

Explanation:

Radioactivity is the spontaneous disintegration of nucleus of an atom resulting in emission of particles and radiation unyil a stable atomic nuclei is obtained. Substances that are exhibit radioactivity are known as radioactive substances and are usually isotopes of stable atoms.

The types of radiation emitted by a radioactive substances include alpha rays, beta rays, and gamma rays.

Alpha rays or particles are fast moving positively charged particles with a mass number of four and atomic number of two. Thus, each alpha particle is a helium nucleus.

Beta rays or particles are vary fast moving stream of electrons having a mass number of zero and a charge of -1.

Gamma rays are not particles but are electromagnetic waves similar to visible light and X-rays but with shorter wavelengths. They have no mass or charge.

An atom emitting alpha particles has its mass reducing by 4 units and its atomic number decreasing by 2.

An atom emitting beta particles as it decays has no change in mass but its atomic number increases by 1.

From the table:

A. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

B. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

C. Particle emitted = beta particles; protons gained = 1; Change in mass = 0

D. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

E. Particle emitted = gamma ray; protons gained = 0; Change in mass = 0

F. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

The number of molecules present is the only quantity that will be the same for both flasks. The quantity that will be the same for both flasks is:

d. number of molecules present

The number of molecules present in each flask is determined by the ideal gas equation, which states that the number of molecules (n) is proportional to the product of the pressure (P), volume (V), and the inverse of the temperature (T):

PV = nRT

Since the two flasks have the same volume, the number of molecules present will be the same if the temperature and pressure are also the same.

However, for the other quantities listed:

a. average molecular speed: The average molecular speed of a gas is directly proportional to the square root of the temperature. Since the temperatures in the two flasks are different (0°C and the other temperature is not specified), the average molecular speeds will be different.

b. density: The density of a gas is determined by its molar mass and pressure. Since [tex]H_2[/tex] and [tex]CO_2[/tex] have different molar masses, their densities will be different even if the pressures are the same.

c. average molecular kinetic energy: The average molecular kinetic energy of a gas is directly proportional to the temperature. Since the temperatures in the two flasks are different, the average molecular kinetic energies will be different.

Therefore, the number of molecules present is the only quantity that will be the same for both flasks.

Learn more about kinetic energy at

brainly.com/question/31912401

#SPJ4

a. Acetylsalicylic acid is a weak acid because it dissociates only partially in water.

b. The expression for Ka for acetylsalicylic acid is

Ka = [H+][C9H7O4O-]/[C9H8O4].

The ionization of acetylsalicylic acid is,

                    C9H8O4    +     H2O  ⇌     H3O+   +  C9H7O4O-

Initial               0.20 M                                0                  0

Change              - x                                     + x              + x

Equilibrium     0.20 - x                                x                   x

The value of Ka for acetylsalicylic acid is 3.0 × 10-4.

Ka = [H+][C9H7O4O-]/[C9H8O4]= 3.0 × 10-4

[H+]^2/[C9H8O4] = 3.0 × 10^-4 × [0.20 - x]

The ionization constant expression is solved for the value of x using the quadratic equation,

0.60 x 10-4 = x^2

               x = 0.0077 M

[H+] = 7.8 × 10-4

The percentage of ionization is,

% ionization = (x/[C9H8O4]) × 100

                    = (0.0077/[0.20]) × 100

                    = 3.85%

Therefore, the % ionization for the solution of acetylsalicylic acid is 3.85%.

Learn more about the % ionization:

brainly.com/question/14907187

#SPJ11

Answer:

saturated

Explanation:

It is not dense enough to be supersaturated.

Answer:

unsaturated

Explanation:

salts arent fatty

Answer:

Global warming stresses ecosystems through temperature rises, water shortages, increased fire threats, drought, weed and pest invasions, intense storm damage and salt invasion, just to name a few.

Explanation:

Global warming stresses ecosystems through temperature rises, water shortages, increased fire threats, drought, weed and pest invasions, intense storm damage and salt invasion, just to name a few.

Answer:

If the choices were coal, petroleum, and natural gas, I would say that petroleum has the greatest impact on the CO₂ levels in the atmosphere. I chose petroleum because of transportation, such as cars, trucks, planes, and more.

The rate law for the reaction is `rate = k[NH4][NO2]` and the rate constant is `k = 0.004 M^-2 s^-1`.

The rate law for the reaction:

`NH4NO2 -> N2 + 2H2O` is `rate = k[NH4NO2]`.

Given that the reaction is first order with respect to both NH4 and NO2, it can be written as `rate = k[NH4][NO2]`. The rate constant k is calculated by plugging in the rate data from the experiment and solving for k.

Example of how to solve for the rate constant k:

Suppose the following rate data was obtained in an experiment where the concentration of NH4 and NO2 were varied:| Experiment | [NH4] (M) | [NO2] (M) | Rate (M/s) || 1 | 0.1 | 0.2 | 4.0x10^-4 || 2 | 0.2 | 0.2 | 8.0x10^-4 || 3 | 0.2 | 0.1 | 4.0x10^-4 |Substituting the given data into the rate law:

Experiment 1: 4.0x10^-4 = k(0.1 M)(0.2 M) = 0.002 k

Experiment 2: 8.0x10^-4 = k(0.2 M)(0.2 M) = 0.008 k

Experiment 3: 4.0x10^-4 = k(0.2 M)(0.1 M) = 0.002 k

Taking the average of the three k values:

k = (0.002 + 0.008 + 0.002)/3 = 0.004 M^-2 s^-1

Therefore, the rate law for the reaction is `rate = k[NH4][NO2]` and the rate constant is `k = 0.004 M^-2 s^-1`.

Learn more about rate law  here:

https://brainly.com/question/30379408

#SPJ11

Explanation:

The terms ‘sand’ and ‘soil’ are often interchanged and used synonymously with one another. Many people consider them the same, but when scrutinized, they are quite different from each other. First and foremost, sand is a type of soil–so is silt, clay, peat, and loam. These types of soils are generated when rocks break up into their constituent parts and are acted upon by outside forces, such as wind, water, and natural salts. The broad definition of soil refers to the loose layer of earth that covers the surface of the planet. Sand, on the other hand, is defined as loose material that consists of rocks or mineral grains.

Answer:

soil is defined as the top layer of the land surface of the earth that is composed of disintegrated rock particles, humus, water, and air.

sand is defined as a loose material that consists of rocks or mineral grains.

Explanation:

The mixing of colored light and colored paint follows different color models and produces different outcomes due to the properties of light and pigments.

Mixing colored light and mixing colored paint are not the same. When mixing colored light, such as using equipment in a lab, the primary colors are red, green, and blue (RGB). By combining different intensities of these colors, you can create various shades and hues. Mixing all three primary colors at full intensity produces white light.

On the other hand, mixing colored paint involves using the subtractive color model. The primary colors are cyan, magenta, and yellow (CMY). When you mix paints, the pigments absorb certain wavelengths of light, and the reflected light determines the perceived color. Mixing all three primary colors in paint results in a dark, muddy color, not white.

To know more about the Paint, here

https://brainly.com/question/30576747

#SPJ4

To prepare a 25.00 mL solution of 0.0250 M NaF, you can follow either of the following procedures:

a. Using Solid NaF:

b. Using 0.100 M NaF Solution:

Both procedures involve careful measurement and mixing of the NaF compound with distilled water in a volumetric flask. The resulting solutions will have a concentration of 0.0250 M NaF.

Read more on glassware here https://brainly.com/question/5017654

#SPJ4

Answer:

fossil fuels are an  nonrenewable resource that people are hoping to replace with renewable resources

Explanation:

(CH₃)₂CO, also known as acetone, is a liquid at room temperature and has a surface tension of 23.8 mN/m.

Surface tension is defined as the tendency of the surface of a liquid to behave like an elastic sheet. The substances with the lowest surface tension are those that tend to spread out to a greater extent on the surface rather than to form a droplet.

Out of the given substances, the one with the lowest surface tension is (e) (CH₃)₂CO, which is acetone.

A) CH₃OH, also known as methanol, is a liquid at room temperature and has a surface tension of 22.6 mN/m.

B) CH₃CH₂CH₂CH₃, also known as butane, is a gas at room temperature and therefore does not have a surface tension value.

C) C₆H₁₄, also known as hexane, is a liquid at room temperature and has a surface tension of 18.4 mN/m.

D) H₂O, also known as water, is a liquid at room temperature and has a surface tension of 71.97 mN/m.

E) (CH₃)₂CO, also known as acetone, is a liquid at room temperature and has a surface tension of 23.8 mN/m.

To know more about acetone refer here: https://brainly.com/question/8854109#

#SPJ11