Answer:
We are given:
V1 = 5.5L T1 = -38 C or 235 k
V2 = 1.3L T2 = T
From the gas equation:
PV = nRT
Since the pressure (P) , number of moles (n) and the universal gas constant (R) are constants, we can write the same equation as:
V / T = k (where k is a constant)
so a bit more insight, since the values noted above are constant, when multiplied by each other, they will provide us with a constant number irrespective of the value of the variables
Changing the variables for the first case:
V1 / T1 = k (where k is the same constant) ----------------(1)
Similarly,
V2 / T2 = k (again, k has the same value)----------------(2)
From (1) and (2):
k is the common value
V1 / T1 = V2 / T2
Replacing the variables
5.5 / 235 = 1.3 / T
T = 1.3 * 235 / 5.5
T = 55.54 k
Therefore, at 55.54 K the gas will have a volume of 1.3L
Light of wavelength 580 nm falls on a slit that is 3.70×10−3mm wide. Part A Estimate how far the first brightest diffraction fringe is from the strong central maximum if the screen is 10.0 m away.
Answer:
Explanation:
wavelength λ = 580 x 10⁻⁹ m
slit width d = 3.7 x 10⁻⁶ m
distance of screen D = 10 m
distance of first bright fringe = 1.5 x λ D / d
= 1.5 x 580 x 10⁻⁹ x 10 / 3.7 x 10⁻⁶
= 2351.34 x 10⁻³ m
= 2351.34 mm .
how much power is used if it takes frank (a 450 N boy ) 3 seconds to run 2 meters ?
Answer:
300
Explanation:
450Newton × 2Meter ÷ 3sec
Help me out on this?
PLEASE HELP EASY MULTIPLE CHOICE!!!!!!!!!!!
Answer:
options C is correct
Explanation:
asking questions is super in this education life
Answer:
option c should be the answer
Define reflection of sound?
An airplane accelerates down a runway at 4.3 m/s2 for 48 s until it finally lifts off the ground. Determine the distance traveled before takeoff.
I
Answer:
x=4953.6m
Explanation:
used formula x=xo+vot+1/2at^2
The car alarm on a stationary car emits sound waves with a frequency of 450 Hz. If you are moving away from the stationary car at 20 m/s, what alarm frequency do you perceive
Answer:
Explanation:
The frequency of wave is directly proportional to velocity
f = kV
k = f/V
f1/V1 = f2/V2
Given
f1 = 450Hz
V1 = 343m/s
f2 = ?
V2 = 20m/s
Substitute into the formula
450/343 = f2/20
Cross multiply
343f2 = 450×20
343f2 = 9000
f2 = 9000/343
f2 = 26.24Hz
how do you Convert 50 g to kg in an equation for physics
Answer:
Divide by 1000
Explanation:
What must be true if a wave's wavelength is short?
A
Its frequency is low.
B
It does not carry energy.
с
Its frequency is high.
D
The waves are visible.
Answer:
im sure its A
Explanation:
The acceleration of the spacecraft in which the Apollo astronauts took off from the moon was 3.4 m/s2 m / s 2 . On the moon, g g = 1.6 m/s2 m / s 2 . what's the apparent weight
Complete Question
The acceleration of the spacecraft in which the Apollo astronauts took off from the moon was 3.4 m/s2. On the moon, g = 1.6 m/s2. What was the apparent weight of a 75 kg astronaut during takeoff?
Answer:
The value is [tex]N = 375 \ N[/tex]
Explanation:
From the question we are told that
The acceleration is [tex]a = 3.4 \ m/s^2[/tex]
The acceleration due to gravity in the moon is [tex]g = 1.6 m/s^2[/tex]
The mass of the astronaut is [tex]m = 75 \ kg[/tex]
Generally the apparent weight is mathematically represented as
[tex]W = ma + mg[/tex]
=> [tex]W = 3.4 * 75 + 1.6 * 75[/tex]
=> [tex]W = 375 \ N[/tex]
The feeling of weightlessness occurs because _____________________.
there is no supporting force under your mass.
there is no gravity present.
there is only a small amount of gravity present.
Answer:
there is only a small amount of gravity present.
Explanation:
this is because the only force acting upon your body during free fall is the force of gravity which is a non contact force.
Thanks to me, you can see straight through the wall. What am I?
Answer:
A window
Explanation:
Answer:
a window.. duh
Explanation:
Which of the organisms in the food web above is the top level carnivore
Answer:
apex consumers
Explanation:
they are top
Which resistance training system helps to increase intensity and optimize time
A. Rest-pause
B.Pyramid
C.Occlusion
D.Superset
Answer:
superset
Explanation:
an air filled parallel plate capacitor has a capacitor of 1.3 pico farad. the separation of the plates is doubled and wax is inserted between them, the new capacitance is 2.6 pico farad. find the dielectric constant of the wax
A 849-kg car starts from rest on a horizontal roadway and accelerates eastward for 5.00 s when it reaches a speed of 35.0 m/s. What is the average force exerted on the car during this time
Answer:
The average force exerted on the car during this time is 5,943 N
Explanation:
Given;
mass of the car, m = 849 kg
initial velocity of the car, u = 0
time of motion of the car, t = 5.00 s
final velocity of the car, v = 35 m/s
The average force exerted on the car during this time is given by;
[tex]F = ma \\\\F = \frac{m(v-u)}{t}\\\\F = \frac{849(35-0)}{5}\\\\F = \frac{849(35)}{5}\\\\ F = 849*7\\\\F = 5,943 \ N[/tex]
Therefore, the average force exerted on the car during this time is 5,943 N
Answer:
5943N
Let's say (+x) = eastward
Average horizontal acceleration
ax = vx -v0x/5.00s
= 35.0m/s-0/5.00s
= +7.09m/s
From here we apply the second law of newton
During this period average horizontal force acting on car
Summation x = max = (849kg)(+7.09m/s²)
= 5943N
+5.943x10³N
= 5.94kN east ward.
An empty 50-g bowl rests on a scale that measures force (in newtons). Water is then poured into the scale from a height of 0.50 m and rate of 10 mL/s. Assuming that the water does not splash as it comes to rest, calculate the reading on the scale at t = 5.0 s
Answer:
1 Newton
Explanation:
Mass of bowl (Mb) = 50 g = 0.05 kg
Initial Velocity (Vo) = 10 mL/s = 10g/s
time (t) = 5.0s
Mass of water (Mw) = 10 g/s * 5s = 50 g = 0.05 kg
*Vob = initial velocity of bowl
*Vow = initial velocity of water
*Vf = final velocity
*g = gravity = 9.8
Conservation of momentum [Inelastic Collision]:
(m1)(Vo1) + (m2)(Vo2) = (M1+M2)Vf(Mw)(Vow) + (Mb)(Vob) = (Mw+Mb)Vf(50g)(10g/s) + (50g)(0) = (50g + 50g)(Vf)Vf = 500/100 = 5g/s = 0.005kg/sImpulse-Momentum Theorem:
Δp = mΔvScale Reading:
Δp + Mw(g) + Mb(g)= (0.05kg + 0.05kg)*(0.05kg/s) + (0.05kg*9.8) +(0.05kg*9.8)= 0.9805 = 1 Newtonthe neuron is considered a (a. Cell. (B.artery. (C. Vein
Answer:
A Cell
Explanation:
Why is our (a person's) gravitational pull NOT as strong as the Earth's gravitational pull
on us?
Gravity doesn't act on us
The Earth is closer to us than the Moon
Our mass doesn't change so the pull is really the same
We are much smaller than the Earth.
Answer:With gravity, two things with mass will want to move toward each other. However, we humans don't feel our gravity pulling on another person because it's not very big, but we do all feel the pull of Earth's gravity all the time - we're not all floating in the air, because that would be happening without Earth's gravity!
Explanation:
BRAINLIEST. Agraph is probelow. The graph shows the speed of a car traveling east over a 12 second period. Based on the information in the graph, it can be
that in the first second
Answer:speeding up constantly
Explanation:
The graph between the time and the speed of the car shows that the speed is increasing constantly, so, option C is correct.
What is speed?A moving object's rate of change in distance traveled is measured as speed. Speed is a scalar, which implies it is a measurement with a magnitude but no direction.
A thing that moves quickly and with high speed, covering a lot of ground in a short time. On the other hand, a slow-moving object traveling at a low speed covers a comparatively small distance in the same amount of time. An object with zero speed does not move at all.
Given:
The graph shows the speed of a car traveling east over a 12-second period,
As you can see from the graph, at time t = 0 sec the speed is 10 m/s,
At t = 3 sec, the speed = 15.3 m/s
At t = 6 sec, the speed = 20.3 m/s
Thus, speed is increasing constantly.
To know more about Speed:
https://brainly.com/question/13074982
#SPJ2
What is the force of a 12 kg object that is accelerating 6 m/s
We are given:
Mass of object (m) = 12 kg
acceleration (a) = 6 m/s²
Solving for the Force:
From newton's second law of motion:
F = ma
replacing the variables
F = 12*6
F = 72N
I need help with this please
Suppose a signal from a vibrating motor is to be sampled discretely with a digital data acquisition system to determine the RPM of the motor. It is known that the maximum possible RPM is 1800. What is the minimum sampling frequency (in Hz) with which the signal can be sampled in order to measure the RPM of the motor
Answer:
f > 60 Hz
Explanation:
According to Nyquist's Sampling Theorem, to be fully reconstructed without any aliasing, the signal must be sampled at least more than twice during the period of the maximum frequency of the signal.In this case, the signal to be sampled has only one frequency.However, as we have the information in RPM, we need to convert this to cycles/sec (Hz) first, as follows:[tex]f = \frac{1800 rev}{min} * \frac{1 min}{60 sec} = 30 Hz[/tex]
Per Nyquist, fs > 2*30 Hz⇒ fs > 60 Hz
Weight of a person's muscles, bones, tendons, and ligaments.
A. flexibility
B. lean mass
C. aerobic
A truck with a mass of 1330 kg and moving with a speed of 15.0 m/s rear-ends a 805 kg car stopped at an intersection. The collision is approximately elastic since the car is in neutral, the brakes are off, the metal bumpers line up well and do not get damaged. Find the speed of both vehicles after the collision in meters per second.
Answer:
The Speed of the vehicles is 9.34m/s
Explanation:
For an elastic collision the two bodies move with similar velocities after collision
Given
M1=1330kg
V1=15m/s
M2=805kg
V2=0(the car is parked on neutral)
The formula is
M1V1+M2V2=(M1+M2)V
1330*15+805*0=(1330+805)V
19950+0=2135V
2135V=19950
divide both sides by 2135
V=19950/2135
V=9.34m/s
Which of the following is true about the following lever?
Answer:
It will rotate counter-clockwise.
Explanation:
The reason is that there is more Nm on the left side which will lift the lever towards the left side.
The lever would rotate counterclockwise as the torque on the left is higher, so, option B is correct.
What is torque?The force which causes the object to rotate about any axis is called perpendicular distance.
Torque is a twisting or turning force that frequently results in rotation around an axis, which may be a fixed point or the center of mass. The ability of something rotating, such as a gear or a shaft, to overcome turning resistance is another way to think of torque.
Given:
The force on the left side, f = 40 N,
The force on the right side, F = 80 N,
The distance of the pivot from the left side, d = 9 m,
The distance of the pivot from the right side, d = 3 m,
Calculate the torque on both side as shown below,
Torque on the left side = 40 × 9
Torque on the left side = 360 Nm
Torque on the right side = 80 × 3
Torque on the right side = 240 Nm,
Here, the torque on the left side is more,
Thus, the lever will rotate counterclockwise.
To know more about torque:
https://brainly.com/question/28220969
#SPJ2
a man weighing 490 n on earth weighs only 81.7 n on the moon. His mass on the moon is__kg. (Use g=9.8 m/s2
Answer:
m = 50 [kg]
Explanation:
In order to solve this problem we must be clear about the difference between weight and mass. Weight is the product of mass by the acceleration of the planet or the star. While the mass is always preserved it never changes regardless of where it is located.
So for the earth we have:
g = gravity acceleration = 9.8 [m/s^2]
m = mass [kg]
W = weigth = 490 [N]
therefore the mass will be:
m = W/g
m = 490/9.8
m = 50 [kg]
Now it is important to remember that the mass will be the same on the moon or on the earth, but the weight will be different, because the gravity acceleration of the moon is different from the gravity acceleration on earth
So the gravity on the moon is equal to:
81.7 = 50 * gm
gm = 1.634 [m/s^2]
A 20m length wire 1.5mm in diameter has a resistance of 2.5 ohm what is the resistance of a 35m length of wire 3mm in diameter made of the same material?
From the calculations, the resistance of the material is 1.1 ohm.
What is the resistance of the wire?Given that;
R α l/A
R = ρl/A
R = resistance
l = length
A = Area
ρ = resistivity
Now;
A = πr^2
A = 3.142 * (1.5 * 10^-3/2)^2
A = 1.77 * 10^-6 m^2
ρ = RA/l
ρ = 2.5 * 1.77 * 10^-6 /20
ρ = 2.2 * 10^-7 ohm/m
Now;
R =ρl/A
A = 3.142 * (3 * 10^-3/2)^2
A = 7.1 * 10^-6 m^2
Thus
R = 2.2 * 10^-7 * 35/ 7.1 * 10^-6
R = 1.1 ohm
Learn more about resistivity:https://brainly.com/question/14547003
#SPJ1
How long does it take a P-wave to travel 7,000 km? ______ minutes b) How long does it take an S-wave to travel 7,000 km? ______ minutes c) How long does it take a Love wave to travel 7,000 km? ______ minutes d) How long does it take a Rayleigh wave to travel 7,000 km? ______minutes
Answer:
A. 8.64 secs.
B. 14.58 secs.
C. 26.002 secs.
D. 33.46secs.
Explanation:
A. P wave would travel 7000km
p-wave travels on a speed of 13.5km/s
= 7000km/13.5km/s
= 8.64 secs.
B. S-wave time to travel 7000km
s-wave travels on a speed of 8km/s
= 7000km/8km/s
= 14.58 secs.
C Love wave travels at a speed of 10,000m/s ( 2.7778 m/s ).
= 7000km to miles
= 4349.598m/2.788m/s
= 26.002 secs.
D. Rayleigh wave to travel 7,000 km
10,000m/s ( 2.1667 m/s ).
= 7000km to miles
= 4349.598m/2.1667m/s
= 33.46secs.
Before the development of quantum theory, Ernest Rutherford's experiments with gold atoms led him to propose the so-called Rutherford Model of atomic structure. The basic idea is that the nucleus of the atom is a very dense concentration of positive charge, and that negatively charged electrons orbit the nucleus in much the same manner as planets orbit a star. His experiments appeared to show that the average radius of an electron orbit around the gold nucleus must be about 10−1010−10 m. Stable gold has 79 protons and 118 neutrons in its nucleus.
What is the strength of the nucleus' electric field at the orbital radius of the electrons?
What is the kinetic energy of an electron in a circular orbit around the gold nucleus?
Answer:
1. [tex] E = 1.14 \cdot 10^{13} N/C [/tex]
2. [tex]E_{k} = 9.1 \cdot 10^{-17} J[/tex]
Explanation:
1. The strength of the nucleus' electric field (E):
[tex]E = \frac{kq}{r^{2}}[/tex]
Where:
k: is the Coulomb constant = 9x10⁹ Nm²/C²
q: is the proton charge = 1.6x10⁻¹⁹ C
r: is the radius = 10⁻¹⁰ m
[tex]E = \frac{kq}{r^{2}} = \frac{9\cdot 10^{9} Nm^{2}/C^{2}*79*1.6 \cdot 10^{-19} C}{(10^{-10} m)^{2}} = 1.14 \cdot 10^{13} N/C[/tex]
2. The kinetic energy (Ek) of an electron is the following:
[tex] E_{k} = \frac{1}{2}mv^{2} [/tex]
Where:
m is the electron's mass = 9.1x10⁻³¹ kg
v: is the speed of the electron
We can find the speed of the electron by equaling the centripetal force (Fc) and the electrostatic force (Fe):
[tex] F_{c} = F_{e} [/tex]
[tex] \frac{mv^{2}}{r} = \frac{kq^{2}}{r^{2}} = qE [/tex]
[tex] v^{2} = \frac{qEr}{m} = \frac{1.6 \cdot 10^{-19} C*1.14 \cdot 10^{13} N/C*10^{-10} m}{9.1 \cdot 10^{-31} kg} = 2.00 \cdot 10^{14} m^{2}/s^{2} [/tex]
Now, we can find the kinetic energy:
[tex] E_{k} = \frac{1}{2}mv^{2} = \frac{1}{2}9.1 \cdot 10^{-31} kg*2.00 \cdot 10^{14} m^{2}/s^{2} = 9.1 \cdot 10^{-17} J [/tex]
I hope it helps you!