The vine has a fixed end, so Tarzan's path is circular. So the vine must not only support Tarzan's weight (or some component of it) but must also provide centripetal force to curve Tarzan's velocity. At Tarzan's lowest point, this can be expressed as:_________.

Answers

Answer 1

Answer: hello your question lacks some data attached below is the missing data

answer : T - mg = ma[tex]_{c}[/tex]

Explanation:

Given that the vine has a fixed end and Tarzan's path is circular

At Tarzans lowest point the point can be expressed as shown below.

It can be expressed as : T - mg = ma[tex]_{c}[/tex]

The Vine Has A Fixed End, So Tarzan's Path Is Circular. So The Vine Must Not Only Support Tarzan's Weight
The Vine Has A Fixed End, So Tarzan's Path Is Circular. So The Vine Must Not Only Support Tarzan's Weight

Related Questions

What's scientific notation

Answers

Scientific notation is a way of expressing numbers that are too large or too small to be conveniently written in decimal form. It may be referred to as scientific form or standard index form, or standard form in the UK.

Dierks is a scientist who is currently focusing on developing a ceramic that holds heat well. He is trying to develop the ceramic to make a higher-temperature curling iron. The application of solid-state physics Dierks is most likely involved in is (BLANK).

Answers

Answer:

i need this 2

Explanation:

Answer:

Materials Science

Explanation:

Materials Science: "The study of the characteristics of materials such as glass, plastics, and metals."

Ceramics is a glass so they are studying materials science.

Hope this helped ! :)

A first aid provider is trained to do the following except:
A) diagnose the victims condition
B) recognize, asses and prioritize the need for first aid
C) seek professional medical assistance when necessary
D) provide appropriate first aid care

Answers

A.
They’re supposed to help the person and cannot diagnose them as that is the job of a doctor

hhhhhhhhhhhhhhhheeeeeeeeeeeeeeeeeeeeellllllllllllllllllllllllllllllllllpppppppppppp

Answers

Answer:

I'm pretty sure the answer is broken

Explanation:

Liana draws a diagram to show the direction of the electric force acting on a charged particle in a uniform electric field.

Which change would make the diagram correct?
A. Changing the charge to negative
B. Making the field lines point down
C. Changing the force to point right
D. Removing the force arrow

Answers

Answer:

changing the force to point right is the correct answer :)

The direction of the force acting on the field should be changed to point towards the right.

What is an electric field?

An electric field is referred to as the region where the influence of charge is felt. Thus, the force acts in the direction of the electric field when the field is uniform.

Having said that, it follows that the direction of the force acting on the field should be changed to point towards the right.

Learn more about electric field:https://brainly.com/question/15800304

#SPJ9

Please help me do this problem

Answers

Answer:

i) acceleration from B to D is 0, because the velocity is constant (stays the same)

ii) whatever units of distathat might be, we can calculate the number:

for 4 time-steps (2 to 6) the velocity is 6 per time step, that makes 24 distance units in these 4 time steps. it's the same the area underneath the graph.

there is also the vertical line from 0 to 2. we can calculate that distance like the area of a triangle with 2*6 / 2 = 6

the total distance from 0 to D is therefore 30

What are the units for impulse?

m/s

Kg

Ns

Newtons

Answers

Answer:

Kg.m/s is the unit for impulse

Explanation:

If i were wrong please correct me.

Molten iron has a density of 7.0 g/cm. In its solid state, iron has a density of
8.0 g/cm?
Calculate the volume of 10 kg of molten iron.

Volume =​

Answers

Answer: 1250 cm^3

As we know density = mass/ volume

Replacing the value in the above formula

8.0 = 1000/ volume

Here, kilogram needs to converted into mass

Volume = 10000/8

Volume = 1260 cm^3

Which of earths spheres are involved in the water cycle

Answers

Answer:

All of the major spheres of the Earth are involved in the water cycle. The four spheres are the atmosphere, hydrosphere, lithosphere, and biosphere....

Explanation:

pa follow thanks ☺️

Which of earths spheres are involved in the water cycle ?

Hydrosphere, atmosphere, lithosphere, and biosphere are all sphere involved in the water cycle.

What is Hydrosphere ?

Hydrosphere is a discontinuous layer of water at or near Earth’s surface. It includes all liquid and frozen surface waters, groundwater held in soil and rock, and atmospheric water vapour.

What is atmosphere?

Atmosphere refers to the gases surrounding a star or planetary body held in place by gravity. ... The composition of the Earth's atmosphere is about 78 percent nitrogen, 21 percent oxygen, 0.9 percent argon, with water vapor, carbon dioxide, and other gases.

What is lithosphere?

A lithosphere is the rigid, outermost shell of a terrestrial-type planet or natural satellite. On Earth, it is composed of the crust and the portion of the upper mantle that behaves elastically on time scales of thousands of years or greater.

What is Biosphere?

The biosphere, also known as the ecosphere, is the worldwide sum of all ecosystems. It can also be termed the zone of life on Earth. The biosphere is virtually a closed system with regards to matter, with minimal inputs and outputs.

#CarryOnLearning

#BrainliestBunch

-BrainliestUser

The distance between an object and a reference point is the object's what?

Answers

Answer:

Displacement

Explanation:

The distance between an object and a certain reference point is called displacement. This is not to be confused with distance, which represents the total distance the object has travelled to get a certain point, regardless of how long it is. Displacement always represents the shortest distance (a straight line) between the initial and final points.

Answer:

Displacement is the distance and direction of an object's change in position from a reference point. Suppose a runner jogs to the 50-m mark and then turns around and runs back to the 20-m mark.

Can someone help me :)

Answers

Answer:

undergone a chemical change

Explanation:

Answer:

undergone a chemical change

define pressure snd state its SI units to​

Answers

Pressure is defined as the perpendicular force acting per unit area.

Its SI unit is pascal.

Explanation:

Formula to calculate pressure is,

P=F/A

Where as,

P = Pressure

F = Force

A = Area

Its SI unit is pascal(pa).

Tom is throwing an baseball at an aluminum can,
present an argument about the likely kinetic energy of the ball before and after.
describe the evidence that would support the argument.
present an argument about the likely kinetic energy of the can before and after.
describe the evidence that would support the argument.

Answers

Answer:

The question relates to the conservation of energy principle, the conservation of the linear momentum, and Newton's Laws of motion

Part A

1) Tom throwing a baseball at a can

The initial velocity of the baseball = v₂

The initial kinetic energy of the baseball, K.E.₂ = (1/2)·m₂·v₂²

∴ The final kinetic energy of the baseball, K.E.₂' = (1/2)·m₂·v₂'² < (1/2)·m₂·v₂²

Therefore, the energy of the ball before the collision is lesser than the energy of the ball after the collision

2) The evidence that would likely support the claim is that the baseball's height above the ground reduces rapidly immediately after the collision which is due to the reduced velocity, and therefore, the reduced (kinetic) energy

The final velocity of the baseball v₂' < v₂

Part B

1) The argument

The initial velocity of the can = v₁ = 0 (The can is initially  at rest)

The initial kinetic energy of the can, K.E.₁ = (1/2)·m₁·v₁² = 0

The final velocity of the can v₁' > v₁ = 0

∴ The final kinetic energy of the can, K.E.₁ = (1/2)·m₁·v₁² > 0

Given that the velocity of the can increases from zero to a positive value after collision with the baseball, the kinetic energy of the can is increased from zero before the collision to a positive value after the collision

2) An evidence in support of the argument is the motion of the can which was initially at rest which is an indication of increase in energy podded by the can

Explanation:

A ball at rest has a mass of 2.5 kg. Determine the force required to accelerate the ball to 2.5 m/s?

Answers

Answer:

6.25 N

Explanation:

F = ma

F = 2.5 × 2.5

F = 6.25 Newtons

A certain AM radio wave has a frequency of 24Hz. Given that radio waves travel at 3 m/s, what is the wavelength of this radio wave?

Answers

Answer:

Wavelength of AM radio wave = 0.125 meter

Explanation:

Given:

Frequency of AM radio wave = 24 Hz

Velocity of AM radio wave = 3 m/s

Find:

Wavelength of AM radio wave

Computation:

Wavelength = Velocity / Frequency

Wavelength of AM radio wave = Velocity of AM radio wave / Frequency of AM radio wave

Wavelength of AM radio wave = 3 / 24

Wavelength of AM radio wave = 0.125 meter

can someone please help me with this question... thank u ❤️​

Answers

Answer:

Which of the following... : constant velocity horizontal motion

A ball is thrown at certain... : 0 m/s

what current flows between a voltage of 120v across a resistance of 30Ω?​

Answers

Answer:

4 amp

Explanation:

From ohm's law,

V=IR

so,

I=V/R

I=120/30

I=4amp ans..

What is a sound wave?

Answers

A sound wave is the pattern of disturbance caused by the movement of energy traveling through a medium (such as air, water, or any other liquid or solid matter) as it propagates away from the source of the sound. The source is some object that causes a vibration, such as a ringing telephone, or a person's vocal chords.

what is substances ?????

Answers

Substance:-

A substance is matter which has a specific composition and specific properties.

A rope horizontally pulls a massive object lying on a surface with friction with a constant
velocity. What describes the force on the rope?

Answers

Answer:

Equal to the frictional force

Explanation:

Question; The options given with regards to a similar question posted online are;

A. Equal (equivalent) to the frictional force

B. Larger than the frictional force

C. Equal to the object's weight

D. More than the object's weight

Explanation

According to Newton's first law of motion, every object shall remain at rest or continue moving with uniform (constant speed) motion unless there is a net force acting on the object

Given that the velocity of the massive block, lying on the surface that has friction, being pulled by the rope = Constant

Therefore;

The net force acting on the moving block while being pulled by the rope = 0

From which we have;

The pulling force = The resistive force

Where;

The pulling force = The (pulling) force (applied) on the rope

The resistive force = The frictional force of the surface which tends to prevent the motion of the block

Therefore, given that the net force acting on the block = 0

The force on the rope = The frictional force (of the surface)

The correct option is option A. Equal to the frictional force.

You might have noticed that a feather falls slowly toward the ground, while a ball falls rapidly. Which statement correctly explains the motion of these objects?

1. The ball does not experience fluid friction as it falls.
2. Gravity is the only force acting on the feather and the ball.
3.The acceleration of the ball and feather are the same.
4. The feather experiences more fluid friction than the ball.

Answers

Answer:

4. the feather experiences more fluid friction than the ball

¿Cuál es la presión que soporta un buzo sumergido a 10 metros de profundidad en el mar? Datos: Densidad del agua de mar = 1025 kg/m^3 Presión atmosférica 101325 Pa Y por que

Answers

Answer:

The pressure at the depth is 201775 Pa.

Explanation:

Depth, h = 10 m

density, d = 1025 kg/m3

atmospheric pressure, Po = 101325 Pa

The total pressure at the depth is

P = Po + h d g

P = 101325 + 10 x 1025 x 9.8

P = 101325 + 100450

P = 201775 Pa

A crate of mass 2 kg is being pulled to the right across a rough horizontal surface by constant force F. The force F is applied at an angle of 20° to the horizontal, as shown in the diagram. how can l draw a labelled free body showing all force​

Answers

Explanation:

Finding the (maximum) respective prime powers would yield the answer. Also we need not ... Is perfectly divisible by 720^n? ... So we can say that for any positive value of n it not

divisible.

Cuatro contenedores idénticos tienen la misma cantidad de gas helio a la misma temperatura inicial. Los recipientes también cuentan con un émbolo móvil que no permite que el helio escape. Cada muestra de gas sigue un proceso distinto como se describe a continuación: Muestra 1: 500 J de calor salen del gas y este realiza 300 J de trabajo. Muestra 2: 500 J de calor entran al gas y este realiza 300 J de trabajo. Muestra 3: 500 J de calor salen del gas y se hace un trabajo de 300 J sobre él. Muestra 4: 500 J de calor entran al gas y se hace un trabajo de 300 J sobre él.

Answers

Answer:

1)  ΔE = -800 J, 2) ΔE = 200 J, 3)  ΔE = -200 J, 4) ΔE = 800 J

Explanation:

For this exercise let's use the first law of thermodynamics

             

          ΔE = Q + W

Where we will apply this expression to several cases

1) output Q = 500 J and does work of W = 300 J.

The two processes involve an energy output

         ΔE = - 500 - 300

         ΔE = -800 J

Therefore, the internal energy of the gas decreases by this amount,

2) enter Q = 500J and do work of W = 300 J

         Positive heat is added and does negative work

         ΔE = 500 - 300

         ΔE = 200 J

3) they leave Q = 500 J and do (work on the gas) W = 300J

negative heat and positive work come out

          ΔE = -500 + 300

          ΔE = -200 J

4) heat enters Q = 500 J, work on gas W = 300 J

both positive

         ΔE = 500 + 300

         ΔE = 800 J

What quantities are needed to calculate angular momentum? There is more than one answer.

A.
Radius

B.
Acceleration

C.
Mass

D.
Velocity

Answers

Answer

Velocity, Mass, and Radius

Explanation:

radius is what the size of the thing moving and the mass and velocity is both part of momentum because of speed and direction, BUT acceleration is both the change in speed and direction, not speed for direction themselves, so it is Velocity, Mass, and Radius

also i'm planning on becoming a trusted helper for brainly!

When do we say that work is done?​

Answers

Answer:

Work is said to be done when a force applied to an object moves that object. We can calculate work by multiplying the force by the movement of the object.

Answer:

Work is done by a force on an object if (i) a force acts on the object and (ii) the object is displaced from its original position

A light ray strikes a reflective plane surface at an angle of 65º with the surface.
Answer the following questions (show your work)
1) Determine the angle of incidence.
2)Determine the angle made by the incident and reflected rays.

Answers

Answer:

65degrees

130degrees

Explanation:

In reflection, the angle of incidence(i) is the same as the angle of reflection (r)

Given that

Angle of reflection is 65degrees

Hence

i=r = 65degrees

Angle that angle made by the incident and reflected rays = i+r = 65+65

Angle that angle made by the incident and reflected rays = i+r = 130degrees

How much pressure is created by a circular piston that is 0.24 meter in diameter
with a Force of 200.0 N? N/m2 ... (round answer to nearest ones place -no decimal)

Answers

Answer:

4000 N/m²

Explanation:

Area = πr²

Area = π x 0.12² (diameter/2)

Area = 0.05 m²

Pressure = force/area

Pressure = 200/0.05

Pressure = 4000 N/m²

Hope this helps!

Determine the value of F
l will give BRAINLIEST.....​

Answers

Answer:

10 N

Explanation:

From the diagram,

Applying the principle of moment,

Sum of clockwise moment = sum of anti clockwise moment.

Assuming: the 10 N is placed on the 5 cm mark, F is placed on the 40 cm mark, The 25 N is placed on the 10 cm mark, the 30 N is placed on the 75 cm mark, and the 40 N is placed on the 80 cm mark.

Therefore,

10(50-5)+F(50-40)+40(80-50) = 30(75-50)+25(50-10)

450+10F+1200 = 750+1000

10F+1650 = 1750

10F = 1750-1650

10F = 100

F = 100/10

F = 10 N

In Einstein’s analysis, a photon striking the surface of a conductor is absorbed by an electron. Which statement describes the set of energy transfers that could occur?
A. the electron receives either all or none of the photon's energy
B. The electron may receive any fraction of the photon's energy, including all or none of it
C. The electron may receive only certain quantized amounts of the photon's energy, including all or none of it

Answers

Answer:

the correct answer is A

Explanation:

In an Einstein-type analysis, the photon is absorbed, it loses all its energy, therefore the electron must receive all or none of the energy of the incident photon. In a type of inelastic shock.

Let's analyze the different answers

A) true. In photon it is completely absorbed or passes without interaction

B) False. The photon must change energy, but in this case there is no absorption of the photon

C) False. In the insistent analyzes, the quantization of the electron in discrete states is not mentioned.

Therefore the correct answer is A

Other Questions
What are the traditional on weaving cloth in asian country? What makes it hard to diagnose psychological disorders? Assume a varible is declared in a block of code within a pair of curly braces. The scope of the variable ______ Group of answer choices starts from its declaration point and extends to the end of the block. starts from its declaration point and extends to the end of the entire program. covers the entire block, including the code before the declaration point. covers the entire program, including the code in the other blocks. the number of calls received by an office on Monday morning between 8:00am and 9:30 am has a mean of 3.Calculate the probability of getting no more than 3 calls between eight and nine in the morning. A certain light truck can go around a flat curve having a radius of 150m with a max speed if 26.5. What is the max speed it can go around a curve having a radius of 76.0m What is geopolitically distinctive The peak value of the electric field component of an electromagnetic wave is E. At a particular instant, the intensity of the wave is of 0.020 W/m2. If the electric field were increased to 5E, what would be the intensity of the wave? Write an equation of a line in slope-intercept form with a slope of -12 and a y-intercept of 3.ay = 3x - 12y = -12(3)+bOb3= -12x + bOdy=-12x + 3 (b) In a continuous series the average weight of some students is 75 kg and the sum of the weights is 6000 kg. Find the number of students. How do these opposing viewpoints show evidence of sectiona in the United States in the 1850s? explain about grassland i think of a number, multiply it by 3, add 4 and square the answer Collins middle school's basketball team won 75% of their games if they lost the board games how many games did they win? Find the value of x.6 3 2 x Hunter is studying a new form of plastic chip that can be added onto a credit card, linking it to a bank accountseparate from the main card. This chip works by passing an electric current through a sensing coil. What applicationof solid-state physics is Hunter most likely working with?O electromagnetismO metallurgyO quantum mechanicsO crystallography (125/64)-1/3 as a radical-1/3 is square it should be and the top of 64 outside the bracket Help please !! Thank u In a group of five students, there are two boys and three girls. The instructor randomly selects one student to record for the group and another student to spy on the other groups. Find P(boy first and girl second), the probability of selecting one of the boys first, and then selecting a girl for the second role which of the following elements are more reactive than the others. A. calcium (Ca)B. Magnesium (Mg) C. potassium (K) D. Sodium (Na) for private goods allocated in markets, a. prices guide the decisions of buyers and sellers and these decisions lead to an inefficient allocation of resources. b. the government guides the decisions of buyers and sellers and these decisions lead to an efficient allocation of resources. c. prices guide the decisions of buyers and sellers and these decisions lead to an efficient allocation of resources. d. the government guides the decisions of buyers and sellers and these decisions lead to an inefficient allocation of resources