The specific heat of octane, C8H18 (1), is 2.22 J/g K. The specific heat of water is 4.184 J/gK.. Does it take more energy to increase 1 mole of water by 10 °C or 1 mole of octane?​

The electrode indicated is the cathode

The contents of the beaker are the electrolyte

Electrons flow from the cathode  to the anode

Dilute sulfuric acid will give colorless gases at both electrodes

The electrodes used could be made from platinum since they are inert.

Electrolysis is a process of using an electric current to drive a non-spontaneous chemical reaction.

This involves the use of an electrolytic cell, where an external power source is used to drive a chemical reaction that would otherwise not occur.

During electrolysis, positive and negative ions move toward the electrodes (positively charged anode and negatively charged cathode) where they undergo oxidation and reduction reactions respectively.

The process is commonly used in the production of metals, such as aluminum, and in the purification of copper and other metals. It is also used in various industrial and laboratory applications, including electroplating, electrorefining, and the production of hydrogen and oxygen gas.

Learn more about electrolysis at: https://brainly.com/question/12994141

#SPJ1

The molar mass of NaCl is 58.44 g/mol, which means that one mole of NaCl contains 6.022 x 10^23 formula units (Avogadro's number).

To determine the number of formula units in a teaspoon of salt, we need to first determine how many moles of NaCl are present in 5.0 g of salt. This can be done using the following formula:

moles = mass / molar mass

moles = 5.0 g / 58.44 g/mol = 0.0854 mol

Next, we can use Avogadro's number to convert moles of NaCl to formula units:

formula units = moles x Avogadro's number

formula units = 0.0854 mol x 6.022 x 10^23 formula units/mol = 5.14 x 10^22 formula units

Therefore, there are approximately 5.14 x 10^22 formula units of NaCl in a teaspoon of salt.

Sublimation and the coma is the only part of the comet that exists when it is further than 5 A.U from the sun.

Generally by the time that the comet comes within about 5 AU of the Sun, sublimation has generally formed a noticeable atmosphere that can easily escape the comet's weak gravity. The coma basically forms as the escaping atmosphere which drags away dust particles that have been mixed with the sublimating ice.

Generally when a comet is at a great distance away from the Sun, it exists as a dirty snowball several kilmometers across. But when it comes closer to the Sun, the warming of its surface causes its materials to melt and vaporize which produces the comet's characteristic tail.

Learn more about comet from the link given below.

https://brainly.com/question/12443607

#SPJ4

In the year 2000, the population of Arctic foxes reached its peak.

A region's population is the total number of people living there. Typically, it is expressed as the number of persons in a given volume or region. A census is typically performed to estimate population in order to ascertain its size, density, and distribution. The term "population" can also refer to the variety of species present in a region. Population growth is the gradual rise in a species' number of individuals in a particular area.

At that time, the total number of Arctic foxes in their habitat, which stretches from northern Europe and Asia over the tundra of the Arctic Circle, was believed to be 745,000. Based on the International Union for Conservation of Nature's most recent estimations, this population figure.

The Arctic fox is a very tough species that can endure some of the world's harshest environments. They can also adjust to their surroundings and eat a range of foods, such as grass, eggs, carrion, small mammals, and carrion.

Unfortunately, a variety of causes are causing the Arctic fox population to decline at the moment. Additionally, human actions like hunting, habitat loss, and fur trapping are lowering their numbers.

The Arctic fox is not now facing extinction, according to the IUCN, which has classified it as a species of Least Concern. However, the species is threatened by a number of factors, and unless conservation efforts are made, its population is likely to keep declining.

Reducing human influences on the Arctic fox's environment is crucial for its protection. This entails restricting hunting and trapping in addition to minimising habitat loss and pollution. The ability of the species to adapt to climate change should also be improved, and their population numbers and trends should be tracked. If these steps are adopted, the number of Arctic foxes may eventually return to its original high.

To know more about Arctic fox, visit:

https://brainly.com/question/15396055

#SPJ1

The complete question is,

Which year saw the highest arctic fox population? How many people attended?

The mass of butane, C₄H₁₀ needed to produce 70.8 g of carbon dioxide, CO₂ is 23.3 g

First, we shall write the balanced equation for the reaction. Details below:

2C₄H₁₀ + 13O₂ -> 8CO₂ + 10H₂O

From the balanced equation above,

352 g of CO₂ were obtained from 1 16 g of C₄H₁₀

Finally, we shall determine the mass of butane, C₄H₁₀ neeeded to produce 70.8 g of carbon dioxide, CO₂. Details below:

From the balanced equation above,

352 g of CO₂ were obtained from 116 g of C₄H₁₀

Therefore,

70.8 g of CO₂ will be obtain from  = (70.8 × 116) / 352 = 23.3 g of C₄H₁₀

Thus, the mass of butane needed is 23.3 g

Learn more about mass:

https://brainly.com/question/21940152

#SPJ1

True. A specific type of dipole-dipole attraction results from the interaction of a hydrogen (H) atom and a weak electronegative atom

A particular kind of dipole-dipole interaction known as a hydrogen bond occurs when a hydrogen atom is covalently connected to an element that is strongly electronegative, such as nitrogen (N), oxygen (O), or fluorine (F), and another weakly electronegative atom that is present nearby. The strongly electronegative atom draws the electrons in the hydrogen-self bond, leaving the hydrogen with a partial positive charge and the electronegative atom with a partial negative charge. As a result, this interaction takes place. A hydrogen bond, a relatively potent attraction, is produced when the hydrogen atom's partial positive charge interacts electrostatically with the surrounding electronegative atom's partial negative charge. Many biological processes, such as the binding of DNA base pairs, protein folding, and cell division, depend on hydrogen bonding.

Learn more about hydrogen bond here:

brainly.com/question/30885458

#SPJ1

The enthalpy change for the reaction is 443.5 kJ/mol, this indicates that the reaction is exothermic, meaning that heat is released during the reaction.

The enthalpy change of a reaction can be calculated using the following equation:

ΔH = ΣΔH(products) - ΣΔH(reactants)

where ΔH is the enthalpy change, Σ is the sum, and the subscripts refer to the enthalpy of the products and reactants.

Using the data provided, we can look up the standard enthalpy of formation (ΔHf°) for each substance involved in the reaction:

ΔHf°(CO(g)) = -110.5 kJ/mol

ΔHf°(H₂(g)) = -285.8 kJ/mol

ΔHf°(CH₃OH(l)) = -238.6 kJ/mol

To calculate the enthalpy change of the reaction, we can plug in these values into the equation:

ΔH = [ΔHf°(CH₃OH(l))] - [ΔHf°(CO(g)) + 2ΔHf°(H₂(g))]

ΔH = [-238.6 kJ/mol] - [-110.5 kJ/mol + 2(-285.8 kJ/mol)]

ΔH = [-238.6 kJ/mol] - [-682.1 kJ/mol]

ΔH = 443.5 kJ/mol

To learn more about enthalpy follow the link:

https://brainly.com/question/16720480

#SPJ1

Due to changes in stream temperature, stream flow due to shortages or increased storms, and other stressors which can affect ecosystem health, these aquatic ecosystems are at risk from climate change.

The long-term trend of the weather in a place is called the climate. Hour by hour, day by day, month by month, or even year by year, the weather might change. Due to changes in stream temperature (which results in a corresponding drop in oxygen levels).

Stream flow due to shortages or increased storms, and other stressors (such as increased storm runoff such as nutrients, pollutants, along with sediment) which can affect ecosystem health, these aquatic ecosystems are at risk from climate change.

To know more about climate, here:

https://brainly.com/question/10440860

#SPJ1

Answer: 10.51 kg of iron is produced in the reaction.

Explanation: The balanced equation for the reaction between iron III oxide and iron is:

2Fe2O3 + 3C → 4Fe + 3CO2

From the equation, we can see that 2 moles of Fe2O3 react to produce 4 moles of Fe. We can use the molar mass of Fe2O3 to convert the given mass to moles, and then use the mole ratio to calculate the moles of Fe produced. Finally, we can convert the moles of Fe to mass using the molar mass of Fe.

The molar mass of Fe2O3 is:

2(55.85 g/mol Fe) + 3(16.00 g/mol O) = 159.69 g/mol Fe2O3

So, 15 kg (or 15000 g) of Fe2O3 is equal to:

15000 g / 159.69 g/mol = 94.03 mol Fe2O3

According to the balanced equation, 2 moles of Fe2O3 produce 4 moles of Fe. So, 94.03 moles of Fe2O3 will produce:

4/2 x 94.03 = 188.06 moles of Fe

The molar mass of Fe is 55.85 g/mol, so the mass of Fe produced is:

188.06 mol x 55.85 g/mol = 10507.8 g or 10.51 kg

Breaking tension describes this circumstance. Tensiometers function up to 0.5 bar. The vacuum gauge of the majority of commercial tensiometers has a suction scale that ranges from 0 to 100 cb.

A tube filled with water and fitted with a specific porous tip and vacuum gauge is a tensiometer. This device monitors soil water suction, which is akin to the method a plant root employs to get water from the ground. upkeep of the field as seen to the right. Tensiometers are reusable and not very expensive.

In comparison to ECH2O-5TE and Watermark without site-specific calibration, Tensiometer gave relatively reliable soil moisture measurements, according to statistical analysis of the results. Watermark overestimated the water content of the soil, while ECH2O-5TE did not.

To know more about Tensiometer's visit:

https://brainly.com/question/30151191

#SPJ1

The molarity of the ascorbic acid ([tex]C_6H_8O_6[/tex]) solution is 0.622 M.

To find the molarity of solution, we need to first calculate number of moles of ascorbic acid present in solution, using the formula:

moles = mass / molar mass

The molar mass of ascorbic acid is:

6(12.01 g/mol) + 8(1.01 g/mol) + 6(16.00 g/mol) = 176.12 g/mol

So, the number of moles of ascorbic acid present in the solution is:

moles = 5.48 g / 176.12 g/mol = 0.0311 mol

Next, we need to calculate the volume of the solution in liters, using the conversion:

[tex]1 mL = 1 * 10^{-3} L[/tex]

50.0 mL x 1 L / 1000 mL = 0.0500 L

Finally, we can calculate the molarity of the solution:

molarity = 0.0311 mol / 0.0500 L = 0.622 M

To know more about ascorbic acid, here

brainly.com/question/23844517

#SPJ1

The reaction in the experiment is exothermic reaction and 158.72 kilo joules at 34.51 degrees celsius is released.

For more information on change in enthalpy kindly visit to

https://brainly.com/question/15457334

#SPJ1

The absorbance of this solution at this wavelength would be 0.287.

We can use the relationship between percent transmittance (%T) and absorbance (A) :

% T = 10 ^ ( - A )

Rearranging this equation, we can solve for A:

A = - log (%T / 100 )

Substituting the given value, we get:

A = - log ( 51. 6 / 100) = - log (0. 516) = 0. 287

Therefore, the absorbance of this solution at 550 nm is 0.287 .

Find out more on absorbance at https://brainly.com/question/14919298

#SPJ1

Eruption triangulation is a method for locating an earthquake's epicenter.

The area right above the spot in the Earth's crust where an earthquake originates or begins is known as the epicenter. It marks the spot on the Earth's surface where the earthquake's seismic waves first touchdown.

The distance between the earthquake's epicenter and a number of seismograph stations is calculated using seismograms, which are records of the ground motion brought on by an earthquake.

The following are the steps to find an earthquake's epicenter:

A minimum of three separate seismograph stations should have data collected. The epicenter's distance from each station is determined by keeping track of the time the earthquake waves arrived at each station.

Map out the positions of each seismograph station.

Draw circles with an equal radius around each seismograph station using the distance information. Each circle's radius is equal to how far away the station is from the epicenter.

At the place where the circles converge, there is an epicenter.

It is crucial to keep in mind that determining the epicenter of an earthquake is not an exact science, and the precision of the position will vary depending on a number of variables, such as the caliber of the seismograms and the distance between the earthquake and the seismograph stations.

To know more about epicenter, visit:

https://brainly.com/question/14261978

#SPJ9

Explanation:

Humidity levels are high, averaging around 82% due to the warm moist trade winds that flow through the archipelago, as well as sea surface temperatures, a rich and vibrant vegetative cover and abundant rainfall.

Answer:

Pressure of the gas =766.4 mmHg.

Explanation:

Gas pressure greater than atmospheric pressure = Atmospheric pressure + Height

745.0 mm + 26.4 cm = 766.4 mmHg.

Answer:

Explanation:

The total mark for this paper is 60.

t The marks for each question are shown in brackets

– use this as a guide as to how much time to spend on each question.

t Questions labelled with an asterisk (*) are ones where the quality of your

written communication will be assessed

– you should take particular care with your spelling, punctuation and grammar, as

well as the clarity of expression, on these questions.

Advice

t Read each question carefully before you start to answer it.

t Keep an eye on the time.

t Try to answer every question.

t Check your answers if you have time at the end.

1) New plants start to grow and sprout: As temperatures warm up in the spring, seeds that have been dormant over the winter start to germinate and new plants start to grow.

Sprout is a type of plant that is grown from a seed. It is usually a young plant that has just started to grow, and is usually eaten raw or lightly cooked. Some of the most common sprouts are alfalfa, broccoli, and mung bean. Sprouts are highly nutritious, as they contain a large amount of vitamins, minerals, protein, and antioxidants. They are a great addition to salads, sandwiches, and stir-fries, and can also be used as a topping for soups or curries. Sprouts are easy to grow at home, and can be enjoyed in a variety of dishes.

2) The leaves on trees start to change colors: As temperatures warm up in the spring, deciduous trees start to produce new leaves that are lighter in color than the leaves they had in the fall.

To learn more about sprout

https://brainly.com/question/20696518

#SPJ1

Answer:

1. Ionic Compound

2.Lithium Oxide

3. Li2O

Explanation:

This is an Ionic Compound because (Lithium) the metal or cation is giving away electrons to the oxygen a nonmental or anion so both can have a full valence electron shell or have all the electrons on the outer most shell.

This is also Lithium Oxide because the metal goes first then the nonmetal and the ending of the non metal is ending with an ide.

The chemical formula is the periodic table symbols (usually the metal first) and then the charges are switched. E.g  Sample A has charge of 3 and sample B has a charge of 2. The formula would be A2B3. If the charge is 1 then you can leave it blank because it is understood. E.g is sample B had a charge of 1 then it would be AB3

The specific heat capacity of the metal can be calculated to be 2.03 J/g･ °C. This result can be explained by the fact that the heat lost by the metal is equal to the heat gained by the ethylene glycol, since no other source of heat is present.

Specific heat capacity is the amount of heat energy needed to raise the temperature of a unit mass of a substance by 1 degree Celsius. It is measured in joules per kilogram Kelvin (J/kg K).

The specific heat capacity (c) of the metal can be calculated using the following equation:

Q = mc∆T

Where Q is the heat lost by the metal, m is the mass of the metal, and ∆T is the change in temperature of the metal.

Q = (115.0 g)(c)(165.0 °C - 25.8 °C)

On the other hand, the heat gained by the ethylene glycol can be calculated using the following equation:

Q = (265.0 g)(2.43 J/g･ °C)(41.5 °C - 25.8 °C)

By equating the two equations, we can solve for the specific heat capacity of the metal:

(115.0 g)(c)(165.0 °C - 25.8 °C) = (265.0 g)(2.43 J/g･ °C)(41.5 °C - 25.8 °C)

c = 2.03 J/g･ °C

Therefore, the specific heat capacity of the metal can be calculated to be 2.03 J/g･ °C.

This result can be explained by the fact that the heat lost by the metal is equal to the heat gained by the ethylene glycol, since no other source of heat is present.

For more questions related to ethylene glycol

https://brainly.com/question/11994953

#SPJ1

Answer:

reducing it with a reducing agent

Answer:

Gold is the most malleable and ductile metal. It is soft and usually alloyed to give it more stability as it is easily bent. It is a great conductor of heat and electricity, but its greatest strength comes from the fact that does not react with oxygen. It is found that gold is unaffected by air, water, bases and most acids.

100 mL of 3 M HCl can be neutralized with exactly 200 mL of 1.5 M NaOH. If this reaction is done in a coffee cup calorimeter, temperature would increase.

A chemical reaction known as neutralisation occurs when an acid and a base quantitatively react with one another. Alternate spellings include Neutralisation. The pH in the neutralised solution is determined by the acidity of the reactant.

Have you ever overindulged in spicy food and felt your stomach start to burn? This results from the stomach producing acid. The use of an antacid, which counteracts the effects of acid, can solve this issue; this process is known as a neutralisation response. 100 mL of 3 M HCl can be neutralized with exactly 200 mL of 1.5 M NaOH. If this reaction is done in a coffee cup calorimeter, temperature would increase.

To know more about neutralisation reaction, here:

https://brainly.com/question/23008798

#SPJ1

Answer:

If a solution appears red, it is most likely that green light is being absorbed the strongest. When light passes through a solution, the solution absorbs certain colors of light while allowing others to pass through. The color that we see is the color that is not absorbed and is transmitted through the solution. In the case of a red solution, red light is transmitted while green light is absorbed. This selective absorption of light is due to the specific chemical composition of the solution.

The balanced equation for the given chemical reaction can be written as 3CsCl + K[tex]_3[/tex]PO[tex]_4[/tex]→ Cs[tex]_3[/tex] (PO[tex]_4[/tex]) + 3KCl.

An equation per a chemical reaction is said to be balanced if both the reactants plus the products have the same number of atoms and total charge for each component of the reaction. In other words, each component of the reaction have an equal balance of mass and charge.

The components and outcomes of a chemical reaction are listed in an imbalanced chemical equation, but the amounts necessary to meet the conservation of mass are not specified. The balanced equation for the given chemical reaction can be written as 3CsCl + K[tex]_3[/tex]PO[tex]_4[/tex]→ Cs[tex]_3[/tex] (PO[tex]_4[/tex]) + 3KCl.

To know more about balanced equation, here:

https://brainly.com/question/7181548

#SPJ1

The standard reduction potential of Y₃⁺ is +1.97 V.

The cell potential of a galvanic cell is given by the difference between the standard reduction potentials of the two half-cells. In this case, the cell consists of two half-cells:

Y₂O₃(s) + 6H⁺(aq) + 3e⁻ → 2Y³⁺(aq) + 3H₂O(l) E° = +1.97 V

AgBr(s) + e⁻ → Ag(s) + Br⁻(aq) E° = +0.65 V

The cell potential is given as 1.32 V. We know the reduction potential of one half-cell (AgBr/Ag), so we can use it to determine the reduction potential of the other half-cell (Y₂O₃/Y³⁺):

E°cell = E°reduction (Y³⁺) - E°reduction (AgBr)

1.32 V = E°reduction (Y³⁺) - 0.65 V

E°reduction (Y³⁺) = 1.32 V + 0.65 V

E°reduction (Y³⁺) = 1.97 V

Therefore, Y₃⁺ has a typical reduction potential of +1.97 V, which is the reduction potential of Y₃⁺ under standard conditions (1 M concentration, 1 atm pressure, 25°C temperature).

To know more about the Cell potential, here

https://brainly.com/question/3657985

#SPJ1

The container received 15.7 moles of gas.

Volume is a unit used to describe how much space an object or substance occupies. It is a physical quantity that, depending on the situation, is typically measured in measures like liters, cubic meters, or cubic feet.

The ideal gas law can be used since the gas's temperature and pressure are constant:

PV = nRT

n is the number of moles, P is the pressure, V is the volume, R is the gas constant, and T is the temperature.

The following equation can be used to link the initial and final volumes because the pressure and temperature are constant.

V1 / n1 = V2 / n2

where V1 and n1 represent the beginning volume and molecular count, and V2 and n2 represent the ultimate volume and molecular count.

To solve for n2 we can rearrange this equation as follows:

n2 = (V2 / V1) * n1

Plugging in the values we are familiar with yields:

n2 = (17.1 L / 3.10 L) * 3.51 mol.

n2 = 19.2 mol

As a result, the container was filled with the following amount of gas:

n2 - n1= 19.2 mol - 3.51 mol = 15.7 mol

As a result, the container received 15.7 moles of gas.

To know more about volume, visit:

brainly.com/question/13338592

#SPJ1

An increase in the internal energy of a system can be caused by several factors, such as heating, compression, and work done on the system.

In general, any process that adds energy to a system will result in an increase in its internal energy. For example, if heat is added to a gas in a closed container, the gas molecules will start moving faster and colliding more frequently, resulting in an increase in the internal energy of the gas.

Similarly, if work is done on a system, such as by compressing a gas, the internal energy of the gas will increase due to the increased kinetic energy of its molecules.

Learn more about internal energy of the system, here:

https://brainly.com/question/28333978

#SPJ1

Dipolar molecules have a separation of charge with a positive center and a negative center located at two different points, resulting in a net dipole moment. The correct option is true

Dipolar molecules are molecules that have a separation of charge, resulting in a positive center and a negative center located at two different points in the molecule.

This separation of charge creates a net dipole moment, which is a measure of the molecule's polarity. The magnitude and direction of the dipole moment depend on the difference in electronegativity between the atoms in the molecule and the molecule's geometry.

Learn more about Dipolar molecules here : brainly.com/question/25670145

#SPJ1

The cell potential (Ecell) at 25°C (298 K) for the given reaction is 1.065 V which means that the reaction is spontaneous because the calculated Ecell is positive

The cell potential (Ecell) for the given reaction can be calculated using the Nernst equation:

Ecell = E°cell - (RT ÷ nF) × ln(Q)

where E°cell = standard cell potential, R = gas constant, T = temperature in Kelvin, n = number of electrons transferred in the reaction, F = Faraday constant, and Q is the reaction quotient.

Since two electrons are transported in the half-reactions, n in this instance equals 2. With the help of the species concentrations, it is possible to determine the reaction quotient Q:

Q = [Fe2+] ÷ [Cu2+]

Q = 0.645 ÷ 0.064

Q = 10.078

Now, we can calculate the Ecell:

Ecell = E°cell - (RT ÷ nF) × ln(Q)

Ecell = (0.337 - (-0.440)) - (8.31 × 298 ÷ (2 × 96500)) × ln(10.078)

Ecell = 1.065 V

To learn more about cell follow the link:

https://brainly.com/question/1313684

#SPJ1