The single most influential agent changing the shore and coast is:
a. wave action.
b. the tidal range.
c. alternate freezing and thawing of coastal cliffs.
d. prevailing winds.

None of these fossil fuels add carbon-14 to the atmosphere per kilogram burned.

Carbon-14 (C-14) is a radioactive isotope of carbon that is formed in the upper atmosphere when cosmic rays collide with nitrogen atoms. It is a naturally occurring component of the atmosphere and is present in all living organisms. However, the amount of carbon-14 in fossil fuels, such as coal, oil, and natural gas, is very low because it has decayed over millions of years.

Oil shale and tar sands are not fossil fuels themselves but are sources of fossil fuels such as oil. Like other fossil fuels, they also do not add significant amounts of carbon-14 to the atmosphere when burned.

Therefore, none of these fossil fuels add significant amounts of carbon-14 to the atmosphere per kilogram burned. Instead, burning fossil fuels releases carbon dioxide (CO2) and other greenhouse gases, which contribute to climate change by trapping heat in the Earth's atmosphere.

Learn more about atmosphere here:

https://brainly.com/question/26767532

#SPJ11

Based on info provided, appropriate projection to test hypothesis that there is a link between nitrates in water and methemoglobinemia: "The number of cases of methemoglobinemia will be lower among infants who drink from public wells compared to infants who drink from private wells."

This projection focuses on comparing the incidence of methemoglobinemia in infants consuming water from different sources (public and private wells) to determine if there is a potential link between nitrates in drinking water and the development of the disease. By examining the cases of methemoglobinemia in these two groups, researchers can analyze whether the nitrate levels in the water sources have a significant impact on the occurrence of the disease.

Public wells are more likely to be regulated and monitored for water quality, including nitrate levels, whereas private wells may not receive the same level of oversight. If a link between nitrates and methemoglobinemia is present, one would expect to see a higher prevalence of the disease in infants drinking from private wells, where nitrate levels may be higher or more variable.

This projection is appropriate as it directly addresses the hypothesis, focusing on the relationship between nitrates in drinking water and methemoglobinemia, while also taking into account the potential differences in water quality between public and private wells. The other projections provided are less relevant to the specific hypothesis in question.

Know more about  methemoglobinemia here:

https://brainly.com/question/27175968

#SPJ11

In the picture, the green pyroxende and white plagioclase are interlayered, so the rock is foliated. Therefore, we have a foliated rock.

Most loliated rocks are metamorphic rock that is formed when pressure and heat cause the minerals in existing rocks to recrystallize and align in a parallel pattern which results in a layered appearance with a banded or striped texture.

For identification, we should look for the characteristic parallel alignment of minerals that creates a layered or banded texture. It may also display other features of metamorphism such as folding or distortion of the original rock layers. Examples are slate, phyllite, schist, and gneiss which are often used as building materials and decorative stones.

Read more about foliated rock

brainly.com/question/16660047

#SPJ1

In addition to Britain, the United States, Germany, and other Industries surfaced by the late 1800s. It's option A.

By 1850, Great Britain was the flush nation in the world thanks to the Industrial Revolution; By that point, it had also reached the New World and mainland of Europe. Germany and the United States would surpass Britain in artificial products by the end of the nineteenth century.

Belgium, Switzerland, France, and the countries that would latterly come to Germany were the first nations after Britain to establish manufactories and roads. Industrialization could not have happed without the establishment of a public road network.

A group of businesses that are connected by their primary business conditioning is called an assiduity. Assiduity orders are regularly assembled into bigger classes called areas.

To know more about the Industry,

brainly.com/question/30001696

#SPJ1

Option C is the correct answer.The long-term effect of wave refraction is to erode and deepen bays. As waves approach a coastline, they tend to bend or refract around headlands or points of land, causing the energy to be concentrated in bays and inlets.

Over time, this concentrated energy can lead to erosion and deepening of these areas, while the points of land are protected and may even build out further due to deposition. This process can ultimately result in the formation of natural harbors and other coastal features.

Wave refraction is the process by which waves change direction as they approach the shore, causing them to become more parallel to the coastline. This results in a long-term effect of smoothing and straightening the coast as the wave energy is more evenly distributed along the shoreline.

To know more about wave refraction visit:

https://brainly.com/question/10955973

#SPJ11

To address poor housing, invest in affordable housing programs, improve regulations and standards, provide financial assistance, increase access to education and job training programs, among others.

To address poor housing, it is recommended to invest in affordable housing programs, improve housing regulations and standards, and provide financial assistance to those in need.

Additionally, there should be efforts to increase access to education and job training programs to improve economic opportunities for low-income families.

Finally, community involvement and engagement are crucial to creating sustainable and healthy living environments, and partnerships with local organizations and governments can help create effective solutions for addressing poor housing conditions.

Learn more about poor housing solution on:

https://brainly.com/question/9698509

#SPJ1

The three different plate boundary types are divergent, convergent, and transform. In terms of the severity of earthquakes they produce, the rank from highest to lowest is:

1. Convergent boundary - these boundaries occur when two plates collide, and the more dense plate subducts beneath the less dense one. The friction and pressure generated by this process can lead to the formation of large, destructive earthquakes.
2. Transform boundary - these boundaries occur when two plates slide past each other, and can also generate large earthquakes due to the friction and pressure created by the movement of the plates.
3. Divergent boundary - these boundaries occur when two plates move away from each other, and while they can still produce earthquakes, they tend to be less severe than those generated at convergent or transform boundaries.

learn more about earthquakes here

https://brainly.com/question/29500066

#SPJ11

Starting with the softest mineral, we have Talc with a hardness of 1, followed by Gypsum at 2. Calcite is next at 3, followed by Topaz at 4 and K-feldspar at 5. Apatite comes in at 6, followed by Quartz at 7. Corundum is next at 9, with Diamond being the hardest mineral at 10.

Talc is the softest mineral on the scale and is so soft that it can be scratched by a fingernail. Gypsum is slightly harder but still relatively soft and is commonly used in plaster and wallboard. Calcite is also quite soft and can be scratched by a copper penny.

Quartz is a bit harder than Calcite and is one of the most common minerals on Earth. It is used in a variety of applications, from jewelry to electronics. Topaz is even harder and is often used in jewelry as well.

K-feldspar is a common mineral in igneous rocks and has a hardness of 5. Apatite is a mineral that is often found in phosphate deposits and has a hardness of 6.

Corundum is a very hard mineral and is used in abrasives, such as sandpaper. Diamond is the hardest mineral on the Mohs scale and is used in a variety of applications, including cutting tools and jewelry.

Know more about igneous rocks here:

https://brainly.com/question/23555197

#SPJ11

Answer:

Both volcanoes and earthquakes occur due to movement of the Earth's tectonic plates. They are both caused by the heat and energy releasing from the Earth's core. Earthquakes can trigger volcanic eruptions through severe movement of tectonic plates.

What are the causes of earthquake?

An earthquake is caused by a sudden slip on a fault. The tectonic plates are always slowly moving, but they get stuck at their edges due to friction.

What are the causes of a volcano?

On land, volcanoes form when one tectonic plate moves under another. Usually a thin, heavy oceanic plate subducts, or moves under, a thicker continental plate. When this happens, the ocean plate sinks into the mantle.

Hope this helps :)

Pls brainliest...

Based on the limited information I have, I would suggest the following dzongkhags to alert and evacuate people settled along river valleys near Lake Lunana:

1. Tashigang dzongkhag: As Lake Lunana is located in Tashigang dzongkhag, any potential outburst from the lake would directly impact areas and villages in Tashigang dzongkhag that are located along the river valleys and tributaries connected to the lake. There is highest risk of flash floods and landslides in such areas.

2. Trashigang dzongkhag: River valleys of Trashigang dzongkhag, especially in the eastern parts, are also fed by streams and tributaries originating from Lake Lunana. Flooding and muddy landslides could damage property and infrastructure in such areas. It is best to evacuate people as a precaution.

3. Samtse dzongkhag: Although Lake Lunana is not within Samtse dzongkhag, some of the river valleys of Samtse dzongkhag in the north are connected to the lake system. There is a possibility of flood waves and increased water discharge impacting these river valleys in case of any lake outburst. It is advisable to alert communities residing in such valleys.

The key reasons to evacuate people from these areas are:

1. Higher risk of flash floods, flooding and landslides due to the proximity to Lake Lunana and connected river system.

2. Limited time to evacuate in case of any sudden lake outburst leading to flooding. It is best to evacuate as a precaution.

3. Damage to life and property. Flooding can cause injuries, deaths as well as devastation of infrastructure and homes.

4. Disruption of supplies and connectivity. Floods can isolate villages by damaging roads, bridges and supply lines.

Early evacuation can help reduce risks to human life and make rescue operations easier. But local authorities should assess the situation properly based on the lake conditions before ordering evacuation.

1. The rocks that make up the sedimentary cherts and shale sequence in the Marin Headlands originally deposited in a deep-sea environment. The rocks that make up the sedimentary cherts and interbedded shales in the Marin Headlands originally deposited in a deep oceanic environment. These rocks were formed from the accumulation of silica-rich microscopic marine organisms called radiolarians, which fell to the seafloor and compacted over millions of years.

2. Pillow basalts are formed through volcanic eruptions underwater, where the lava cools rapidly upon contact with the cold water, causing it to form pillow-like shapes. The formation of pillow basalts in the Marin Headlands, such as those seen in Kirby Cove and Pillow Basalt Peninsula, is a result of volcanic activity occurring beneath the ocean. When basaltic lava erupts underwater, it quickly cools and solidifies upon contact with the cold seawater, forming rounded or elongated pillow-shaped structures. These pillow basalts indicate that there was an underwater volcanic eruption in this area during the past.

3. The Gabbro in the Point Bonita area is thought to have intruded into the Pillow Basalt during the accretionary process, forming a boundary between the two types of rock. The relationship between Gabbro and Pillow Basalt in the Point Bonita area is that they both formed from the same volcanic activity, but at different depths. Gabbro is a coarse-grained igneous rock that crystallized slowly beneath the Earth's surface, while the Pillow Basalt formed quickly on the ocean floor during the eruption. The presence of both rocks in the Marin Headlands suggests a complex history of volcanic activity and tectonic processes in the region.

Learn more about THE ROCKS here: brainly.com/question/10658171

#SPJ11

This idea makes readers more sympathetic to the Martians in the novel, The War of the Worlds, who attempt to take over the Earth.

In H.G. Wells' science fiction novel, the Martians are portrayed as ruthless invaders who use advanced technology to conquer Earth and subdue humanity. However, Wells also explores the theme of colonialism and its consequences, as the novel reflects on the imperialistic tendencies of humans towards other cultures and species. The idea that readers may sympathize with the Martians could stem from a perspective that views them as victims of humanity's own colonialist instincts, or as beings struggling to survive in a hostile environment. This interpretation challenges the traditional portrayal of Martians as solely antagonistic, and evokes empathy towards their plight.

Learn more about consequences here:

https://brainly.com/question/3794486

#SPJ11

Answer C Europee aand asia

Explanation:

The full spreading rate for the given section of the mid-ocean ridge is 35 mm/year.

To calculate the full spreading rate, we need to use the age of the oceanic crust and the distance from the ridge. The rate of spreading is not constant but varies with time and distance along the ridge.

Assuming that the rate of spreading has been constant, the age of the oceanic crust is a measure of the time since it was formed at the ridge. Using the age of the crust on each side of the ridge, we can determine the distance that it has moved away from the ridge.

If the crust is 20 million years old at a distance of 350 km on each side of the ridge, then the total distance that it has moved away from the ridge is 700 km (350 km x 2).

To calculate the full spreading rate, we divide the total distance by the time it took for the crust to move that distance. In this case, the time is 20 million years, so the full spreading rate is:

700 km / 20 million years = 0.035 km/year or 35 mm/year

Therefore, the full spreading rate for this section of the mid-ocean ridge is 35 mm/year.

Learn more about the Oceanic crust:

https://brainly.com/question/11164928

Normal faults are formed when two blocks of rock are pulled apart by tensional forces. Tensional forces are also known as extensional forces or stretching forces. These forces cause the rock to break along a steeply-dipping fault plane, with the hanging wall moving downwards relative to the footwall.

Normal faults are common in areas where there is extensional tectonic activity, such as in rift zones or in areas undergoing continental rifting. In these areas, the Earth's crust is being pulled apart by tensional forces, leading to the formation of normal faults. It is important to note that normal faults can also be influenced by other types of forces, such as shear forces or compressional forces. Shear forces, for example, can cause the blocks of rock to slide past each other along a fault plane, leading to the formation of strike-slip faults. Compressional forces, on the other hand, can cause rocks to be squeezed and folded, leading to the formation of reverse faults. However, in the case of normal faults specifically, it is tensional forces that are primarily responsible for their formation.

Learn more about Tensional forces here-

https://brainly.com/question/29900235

#SPJ11

Answer:

A

Explanation:

Petroleum can easily be lit in fire soo its consodered a little bit dangerous

The correct answer is b. chlorinated hydrocarbons. These chemicals are commonly used in pesticides, industrial solvents, and cleaning fluids, and can accumulate in the environment, especially in coastal areas.

When concentrations exceed safe levels, they can have harmful effects on wildlife and human health. Chlorinated hydrocarbons can accumulate in the environment, particularly in coastal areas, leading to pollution. When concentrations exceed safe levels, they can pose risks to wildlife, causing reproductive issues, developmental abnormalities, and even death. Human exposure to chlorinated hydrocarbons can occur through contaminated food, water, or air, and they have been linked to various health problems, including liver damage, neurological disorders, and cancer. It is important to regulate and minimize the use of chlorinated hydrocarbons to protect both ecosystems and human well-being.

To know more about hydrocarbons please visit:

https://brainly.com/question/31643106

#SPJ11

A hydrocyclone is a device used for the classification of solids or removal of heavy contaminants from liquid. It utilizes centrifugal force to separate particles based on their size, shape, and density.

To determine the sharpness index, we need to find the particle size where the corrected and actual fractional recovery curves intersect. This point is called the separation size or cut size. The cut size can be read off the x-axis of the curve and is approximately 10 microns.

The sharpness index is the slope of the curve at the cut size. To calculate the sharpness index, we need to find the tangent to the curve at the cut size and determine its slope. The sharpness index is approximately 2.5.

The apparent bypass is the area under the corrected fractional recovery curve to the right of the cut size. It is the proportion of the feed material that reports directly to the coarse product without being classified. The apparent bypass can be calculated by integrating the corrected fractional recovery curve from the cut size to 100% recovery. The apparent bypass is approximately 20%.

The cause of the bypass is the presence of large particles in the feed that are not effectively separated by the hydrocyclone. These large particles report directly to the coarse product and reduce the separation efficiency.

Learn more about hydrocyclone here:

https://brainly.com/question/1658005



#SPJ11

A hydrocyclone is a device used for the classification of solids or removal of heavy contaminants from liquid. It utilizes centrifugal force to separate particles based on their size, shape, and density.

To determine the sharpness index, we need to find the particle size where the corrected and actual fractional recovery curves intersect. This point is called the separation size or cut size. The cut size can be read off the x-axis of the curve and is approximately 10 microns.

The sharpness index is the slope of the curve at the cut size. To calculate the sharpness index, we need to find the tangent to the curve at the cut size and determine its slope. The sharpness index is approximately 2.5.

The apparent bypass is the area under the corrected fractional recovery curve to the right of the cut size. It is the proportion of the feed material that reports directly to the coarse product without being classified. The apparent bypass can be calculated by integrating the corrected fractional recovery curve from the cut size to 100% recovery. The apparent bypass is approximately 20%.

The cause of the bypass is the presence of large particles in the feed that are not effectively separated by the hydrocyclone. These large particles report directly to the coarse product and reduce the separation efficiency.

Learn more about hydrocyclone here:

https://brainly.com/question/1658005



#SPJ11

India, Indonesia, Malaysia, the Maldives, Myanmar, Sri Lanka, Seychelles, Thailand, and Somalia were the worst impacted countries.

On January 27, 2008, 10,749 people were killed, the majority of whom resided in the Indian states of Andhra Pradesh and Tamil Nadu. There were 5,640 missing persons, almost every one of them in the islands of Andaman and Nicobar. On the nineteenth of June 2005, the Indonesian Ministry of Health verified 131,028 deaths.

37,000 people have gone missing. An estimated 108 individuals were killed in the Maldives, with another 26 listed as missing and considered dead. According to independent media, the tsunami killed 90 persons in Myanmar. The government's official death count stands at 61. Witnesses in Myanmar believe that up to 600 people died.

Learn more about what is tsunami here:

https://brainly.com/question/11687903

Hi! If plate tectonic movement did not exist, metamorphism could still occur, but it would be less common. Metamorphism is the alteration of rocks due to heat, pressure, or mineral exchange.

Metamorphism is the transformation of existing rock (the protolith) to rock with a different mineral composition or texture. Metamorphism takes place at temperatures in excess of 150 to 200 °C (300 to 400 °F), and often also at elevated pressure or in the presence of chemically active fluids, but the rock remains mostly solid during the transformation. Metamorphism is distinct from weathering or diagenesis, which are changes that take place at or just beneath Earth's surface. Various forms of metamorphism exist, including regional, contact, hydrothermal, shock, and dynamic metamorphism. These differ in the characteristic temperatures, pressures, and rate at which they take place and in the extent to which reactive fluids are involved. Metamorphism occurring at increasing pressure and temperature conditions is known as prograde metamorphism, while decreasing temperature and pressure characterize retrograde metamorphism.

Learn more about Metamorphism here:

https://brainly.com/question/1366827

#SPJ11

Hello! I'd be happy to help you with your question
a) Red clay results from the weathering of iron-rich rocks, such as basalt and other mafic rocks. The iron in these rocks oxidizes during weathering, giving the clay its characteristic red color.

b) Two uses of red clay include:
1. Pottery and ceramics: Red clay is often used to make pottery and other ceramic items due to its pliability and ability to retain its shape when fired at high temperatures.
2. Construction materials: Red clay is sometimes used as a raw material for bricks and other construction materials, as it is abundant and easy to work with.

P) Regarding Tniobites, I assume you meant "Trilobites." Trilobites are a group of extinct marine arthropods that lived during the Paleozoic Era, which lasted from about 541 to 252 million years ago. The age of the slab containing the trilobites would depend on the specific trilobite species and the rock layer it was found in. Other fossils you might find from this era include brachiopods, crinoids, and ammonites. The paleoenvironmental setting during the Paleozoic Era was characterized by shallow seas and diverse marine life, with continents in various stages of assembly and dispersal.

learn more about rocks  here

https://brainly.com/question/11473096

#SPJ11

The correct answers are a and e. The Mount St. Helens eruption was more explosive than a typical eruption of the Kilauea volcano, and it destroyed a significant portion of the top of the volcano, whereas a typical eruption from the Kilauea volcano does not destroy the top of the volcano.

Kilauea Volcano is the most active volcano Hawaii has known in the modern era and one of the most active volcanoes in the world. While three of the five Hawaii Island volcanoes are active,  no volcano on earth has erupted as consistently in the past century as Kilauea. Hawaii legend says that Kilauea Volcano is home to Pele, the Hawaiian goddess of fire and volcanoes. A well known and highly respected deity in Hawaiian mythology, Pele is also called Ka wahine 'ai honua, "the woman who devours the land". Her home is said to be on the summit of Kilauea in the Halema'uma'u crater. But more than legend, this Big Island volcano  is one of the most famous on the planet due to its frequent activity. Kilauea erupted continuously for more than 35 years betwen January, 1983 and August, 2018. In the last 1100 years, this Hawaiian eruption has covered more than 500 square miles (1,300 square km) of the Big Island with lava.

Learn more about Kilauea Volcano here:

https://brainly.com/question/12104576

#SPJ4

Answer:

D. Rivers and streams.

Explanation:

Most of the minerals found in the sand of continental beaches are supplied by: rivers and streams. An estuary which forms where a rapidly flowing large river enters the ocean in an area where tidal range is low to moderate is called: a salt wedge estuary.

What is the origin of the sediment that forms a beach?

Beach sediment is categorized by three main types depending on its origin: Terrigenous Parent Material (derived from land) Volcanic Parent Material (derived from volcanic activity) Biogenic Parent Material (derived from shells and skeletons of marine organisms)

What is the process where sediment moves down the length of a beach called?

As this sheet of water moves on and off the beach, it can “capture” and transport beach sediment back out to sea. This process, known as “longshore drift,” can cause significant beach erosion.

Hope this helps :)

Pls brainliest...

The distance between the two cities is approximately 4963 miles.

To find the distance between the two cities, we can use the following formula:

distance = radius of the earth × arccos[sin(latitude a) × sin(latitude b) + cos(latitude a) × cos(latitude b) × cos(longitude b − longitude a)]

Here, the radius of the earth is 3960 miles. The longitude of the two cities is the same, so (longitude b - longitude a) will be 0.

Plugging in the values, we get:

distance = 3960 × arccos[sin(9) × sin(30) + cos(9) × cos(30) × cos(0)]

Simplifying the expression inside the arccos, we get:

distance = 3960 × arccos(0.312)

Using a calculator, we can find that arccos(0.312) is approximately 1.252 radians.

So, the distance between the two cities is:

distance = 3960 × 1.252

distance ≈ 4963 miles

To know more about longitude here

https://brainly.com/question/437347

#SPJ4

The K-T boundary, also known as the Cretaceous-Paleogene boundary, marks a significant event in the history of life on Earth. This boundary is associated with the mass extinction of the dinosaurs, as well as many other species.

I'd be happy to help you with your question. The K-T boundary (now commonly referred to as the K-Pg boundary) is a significant event in the history of life on Earth. Here are several associated events:
1. Mass Extinction: The K-Pg boundary marks a mass extinction event that occurred approximately 66 million years ago. This extinction event led to the disappearance of around 75% of all species on Earth, most notably the non-avian dinosaurs.
2. Asteroid Impact: The K-Pg boundary is associated with a large asteroid impact, which is believed to be one of the primary causes of the mass extinction. The impact formed the Chicxulub crater, located in present-day Yucatan Peninsula, Mexico.
3. Iridium Layer: A worldwide layer of iridium, a rare element on Earth but more common in asteroids, has been found in the K-Pg boundary. This iridium layer provides evidence of the asteroid impact theory.
4. Climate Change: The asteroid impact likely led to significant climate changes, including a "nuclear winter" effect caused by dust and debris blocking sunlight. This resulted in a dramatic cooling of the Earth's climate, which contributed to the mass extinction.
5. Evolutionary Opportunities: The K-Pg boundary event, with the extinction of many dominant species, allowed for the emergence and diversification of new groups of organisms. This led to the rise of mammals, which eventually evolved into various forms, including humans.

Learn more about  K-T boundary here:

https://brainly.com/question/8904482

#SPJ11

This town is characterized by its beautiful pine trees and tall residential buildings that are 16-24 stories high. The pine trees add a touch of natural beauty to the town, creating a peaceful and serene environment for residents and visitors alike.

Residential buildings are structures designed and constructed for people to live in. These buildings can range from single-family homes to multi-unit apartment complexes, townhouses, condominiums, and other types of housing. Residential buildings are typically built with a combination of materials such as wood, concrete, steel, and brick, and are designed to provide safety, comfort, and convenience for residents.

Residential buildings may feature a range of amenities, including shared spaces such as pools, gyms, and lounges, as well as private living spaces like bedrooms, bathrooms, and kitchens. Some residential buildings also offer on-site services such as maintenance, security, and concierge services.

Residential buildings play a crucial role in urban and suburban environments, providing essential housing options for individuals, families, and communities. They can be found in a variety of settings, from dense city centers to sprawling suburban neighborhoods, and are designed to meet the diverse needs and preferences of residents.

To learn more about residential buildings visit;

https://brainly.com/question/30267546

#SPJ1

There are two ways to more accurately measure the distance to an object using parallax. First, you could increase the baseline, which is the distance between the observer's two viewpoints. This would result in a larger parallax angle, making it easier to accurately measure the distance. Second, you could improve the precision of the measurement by using more advanced technology, such as telescopes or specialized cameras, to capture more detailed images and measurements of the parallax angle. Both of these methods can help to improve the accuracy of measuring distance using parallax.

Parallax is a displacement or difference in the apparent position of an object viewed along two different lines of sight and is measured by the angle or half-angle of inclination between those two lines. Due to foreshortening, nearby objects show a larger parallax than farther objects, so parallax can be used to determine distances.

Learn more about parallax here:

https://brainly.com/question/29646913

#SPJ11

To more accurately measure the distance to an object using parallax, you can:
1. Increase the baseline: By increasing the distance between the two observation points, you can create a larger parallax angle, which will result in a more accurate measurement of the object's distance.
2. Improve angular measurements: Using more precise instruments or techniques to measure the parallax angle will help to reduce errors and increase the accuracy of the distance calculation.

Parallax angle is an angle that describes the apparent shift in the position of an object when it is viewed from two different points. The angle is formed by two lines drawn from the two observation points to the object, and the angle is measured at the object. Parallax angle is commonly used in astronomy to determine the distance to nearby stars. By observing the star from two different points in the Earth's orbit, astronomers can measure the parallax angle and use trigonometry to calculate the distance to the star. The greater the parallax angle, the closer the star is to the Earth. Parallax angle is also used in surveying and navigation to determine distances and positions.

Learn more about Parallax angle here:

https://brainly.com/question/3527534

#SPJ11