The signboard truss is designed to support a horizontal wind load of 800 lb. A separate analysis shows that 5 8 of this force is transmitted to the center connection at C and the rest is equally divided between D and B. Calculate the forces in members BE and BC.

Answer:

The answer is "828.75"

Explanation:

Please find the correct question:

For W21x93 BEAM,

[tex]Z_x = 221.00 in^3 \\\\\to \frac{b_t}{2t_f} =4.53\\\\\to \frac{h}{t_w}=32.3[/tex]

For A992 STREL,

[tex]F_y= 50\ ks[/tex]

Check for complete section:

[tex]\to \frac{b_t}{2t_f} =4.53 < \frac{65}{\sqrt{f_y = 9.19}}\\\\\to \frac{h}{t_w} =32.3 < \frac{640}{\sqrt{f_y = 90.5}}[/tex]

Design the strength of beam =[tex]\phi_b Z_x F_y\\\\[/tex]

                                                [tex]=0.9 \times 221 \times 50\\\\=9945 \ in \ \ kips\\\\=\frac{9945}{12}\\\\= 828.75 \ft \ kips \\[/tex]

Answer:

it's B I think

Explanation:

hopefully that helps you

Answer: C

Explanation: A mortar mixer is the equipment that would help Seth in the process of building a wall of bricks. A mortar mixer is used to mix the mortar, which is the binding material used to hold the bricks together. It ensures the mortar is properly mixed to the right consistency for laying the bricks.

Answer:

The answer is "Option D".

Explanation:

[tex]\to \epsilon_T= 0\\\\\to R+R_1=500 \ lb \\\\\to \epsilon \ M_{pin} > 0\\\\\to -R \times 20 +(500 \times 5) =0\\\\\to 2500 =20R\\\\\to 20R= 2500\\\\\to R= \frac{2500}{20}\\\\\to R= \frac{250}{2}\\\\\to R= 125 \ lb \\\\\to R_1 =500-125\\[/tex]

         [tex]=375 \ lb \\[/tex]

Answer:

Anne is a mechanical engineer.

Explanation:

There are many different types of engineers (mechanical, industrial, electrical, chemical and civil) around the world. When a job involves designing machines, it falls under mechanical engineering. Such job requires a person to be as creative as possible, so he/she can come up with an innovative design that will be reasonable when used.

Designing machines includes spacecrafts. Therefore, Anne is a mechanical engineer working for NASA.

This question is incomplete, the complete question is;

Determine the greatest pressure drop allowed over the 10-m-long pipe caused by viscous friction, so the flow remains laminar.

The 125-mm-diameter smooth pipe is transporting SAE 10W-30 oil with ρ=920 kg/m3 and µ=0.2 N.s/m2 .

Answer: the greatest pressure drop allowed is 14247 Pascals

Explanation:

LAMINAR FLOW INF PIPE

greatest pressure drop

(P1 - P2) = pressure drop

(P1 - P2) = 32uvl / D²

so (P1 - P2) ∝ V

greatest pressure drop is only at very high velocity

now Re (Reynold Number = svd / u

Re ∝ V

so velocity is high when Re is high

Re = 2000 ( Highest for LAMINAR)

Re = 2000 = svd / u

now in the question we were given that

s = 920 kg/m³, u = 0.2 NS/m², d = 125mm = 0.125m, l = 10m

so we substitute;

2000 = (920 × v × 0.125) / 0.2

v = 3.48 m/s

now pressure drop = (P1 - P2) = 32UVL / d²

we substitute

(P1 - P2)  = (32(0.2) (3.48)(10)) / (0.125)²

(P1 - P2) = 14247 Pascals

therefore the greatest pressure drop allowed is 14247 Pascals

Answer:

C₁₀ = 6.3 KN

Explanation:

The catalog rating of a bearing can be found by using the following formula:

C₁₀ = F [Ln/L₀n₀]^1/3

where,

C₁₀ = Catalog Rating = ?

F = Design Load = 2.75 KN

L = Design Life = 1800 rev/min

n = No. of Hours Desired = 10000 h

L₀ = Rating Life = 500 rev/min

n₀ = No. of Hours Rated = 3000 h

Therefore,

C₁₀ = [2.75 KN][(1800 rev/min)(10000 h)/(500 rev/min)(3000 h)]^1/3

C₁₀ = (2.75 KN)(2.289)

C₁₀ = 6.3 KN

Answer: aerofoil type blades

Explanation: they are more difficult to make but offer better performance and higher rotational speeds making them ideal for electrical energy generation.

Answer:

In 2019, the average term length was 69 months for new cars and 65 months for used vehicles. Most car loans are available in 12 month increments, lasting between two and eight years. The most common loan terms are 24, 36, 48, 60, 72, and 84 months, according to Autotrader

Explanation:

The color of white light bends the most when it is refracted by a prism is green after the violet.

The shorter the wavelength of the mild, the greater its miles refracted. As a result, crimson mild is refracted the least, and violet mild is refracted the most - inflicting the colored mild to unfold out to shape a spectrum.

The hues of white mild withinside the order of lowering wavelength are crimson orange-yellow inexperienced blue indigo violet. Fro the listing we are given withinside the alternatives inexperienced has the shortest wavelength than others. Therefore inexperienced will bend the most.

Read more about the refracted :

https://brainly.com/question/1360744

#SPJ2

Answer:

1) titration

2) titrand

3) equivalence point

4) titrant

5) Burette

6) Indicator

Explanation:

The process in which a known volume of a standard solution is added to another solution so that the standard solution can react with the solution of unknown concentration such that its concentration is determined  can be referred to as titration.

The solution which is added to another solution  is called the titrant.  The titrand is the solution of unknown concentration

A burette is a glassware used to slowly add a known volume of the titrant to the titrand.

The indicator used signals the point when the reaction is complete by a color change. At this point, a stoichiometric amount of titrant has been added to the titrand. This is also referred to as the equivalence point.

Answer:

changes of Mass affect the planet because... I'm sorry If this didn't help.

Answer:

1) titration

2) titrand

3) equivalence point

4) titrant

5) Burette

6) Indicator

Explanation:

The process of adding a known volume a standard solution to another solution to react with it in order to determine the concentration of the unknown solution is known as titration.

The solution to which another solution of known concentration is added is called the titrand while the solution of known concentration is called the titrant.

A burette is a glassware used to slowly add a known volume of the titrant to the titrand. An indicator shows the point when the reaction is complete by a color change. This is the point when the required amount of one solution has been added to the second solution. It is also called the equivalence point.

I. The process of slowly adding a solution to react with another solution and determine the concentration of one of the solutions based on the reaction between them: Titration.

II. A solution of an unknown concentration that has another solution slowly added to it: Analyte.

III. When the required amount of one solution has been added to the second solution to complete the reaction: Endpoint.

IV. A solution of known concentration that is slowly added to a solution of unknown concentration: Titrant.

V. A glassware that allows a solution to be precisely and slowly added to another solution: Burette.

VI. A reagent added to the analyte solution that changes color when the reaction is complete: Indicator.

Titration is also referred to as titrimetry or volumetric analysis and it can be defined as a chemical process in which a solution of known concentration is slowly added to a solution of unknown concentration, in order to determine the concentration or quantity of the analyte (solution of an unknown concentration)

For example, titration can be used to determine the concentration of a basic solution by titrating it with an acid solution of known concentration that is required to neutralize the basic solution.

In Chemistry, the following terms and apparatus are used for the titration of solutions:

Read more: https://brainly.com/question/23307058

Answer:

Aerodynamic drag can be reduced by altering the density of the air and the vehicle speed, but these factors are not easily controlled. Instead, to reduce drag, car manufacturers can make the height and width of the front of the car smaller. ... This shape reduces drag and the forces that try to propel the car backwards.

Answer:

Car manufacturers can make the height and width of the front of the car smaller.

Explanation:

The shape reduces drag and the forces it to propel the car backwards.

Answer:

1. They needed to develop multiple components in software programs.

2. The ability to overlap the development to be more evolutionary in nature.

3. The need to be more risk-averse or the unwillingness to take risks led to the use of a spiral model.

Explanation:

Software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications.

In SDLC, a waterfall model can be defined as a process which involves sequentially breaking the software development into linear phases. Thus, the development phase takes a downward flow like a waterfall and as such each phase must be completed before starting another without any overlap in the process.

An incremental model refers to the process in which the requirements or criteria of the software development is divided into many standalone modules until the program is completed.

Also, a spiral model can be defined as an evolutionary SDLC that is risk-driven in nature and typically comprises of both an iterative and a waterfall model. Spiral model of SDLC consist of these phases; planning, risk analysis, engineering and evaluation.

What motivated software engineers to move from the waterfall model to the incremental or spiral model is actually due to the following fact;

Answer:

attached below is the solution

Explanation:

hello  attached below is the sequence of push and pop operations on stack memory

For The collatz method below

public void collatz(int n) {

if (n == 1) return;

else if (n % 2 == 0)

collatz(n / 2);

else collatz(3*n + 1); }

Answer:

hello your question is incomplete attached below is the missing diagram to the question and the detailed solution

Answer : principal stresses : 0.82 MPa, -33.492 MPa

              shear stress = 17.157 MPa

              ∅ = 9.09 ≈ 10°

Explanation:

The principal stress ( б1 ) = 0.82 MPa

                                 ( б2 ) = -33.492 MPa

The shear stress = 17.157 MPa

∅ = 9.09 ≈ 10°

attached below is the detailed solution and the Mohr's circle

Answer:

a) the rate of heat transfer from the pipe to the air is 23.866 watts

b) YES, the rate of heat transfer changes to 3518.61 watt

Explanation:

Given that:

steam is saturated at 17.90 bar.

the pipe is stainless steel and has an outside diameter of 6.75 cm

length = 34.7 m

Air flows over the pipe at 7.6 m/s

Bulk fluid temperature of 27°C

we know that

hD/k = 0.028 (Re)^0.8 (Pr)^0.33

Outside diameter of pipe = 6.75 cm

length of the pipe = 34.7 m

velocity of air = 7.6 m/s

Cp of air = 1.005 kJ/Kgk

viscosity of air = 1.81 × 10⁻⁵ kg/(m.sec)

thermal conductivity of air = 2.624 × 10⁻⁵ kw/m.k

so as

hD/k = 0.028 (Re)^0.8 (Pr)^0.33

hD/k = 0.028 (Dvp / u)^0.8 (Cpu / k)^0.33

(h × 0.0675 / 2.624 × 10⁻⁵) = (0.028 ([0.0675 × 7.6 × 1.225] / [1.81 ×10⁻⁵])^0.8) (((1.005 × 1.81 × 10⁻⁵) / (2.624 × 10⁻⁵))^0.33))

h = 0.0414 w/m².k

a)

Now to find the rate of heat transfer Q

Q = hAΔT

Q = 0.0414 × (2π × 0.03375 × 34.7) × (105.383 - 27)

Q = 23.866 watts

therefore the rate of heat transfer from the pipe to the air is 23.866 watts

b)

Now the flow direction changes to parallel flow, then

(h × 0.0675 / 2.624 × 10⁻⁵) = (0.028 ([34.7 × 7.6 × 1.225] / [1.81 ×10⁻⁵])^0.8) (((1.005 × 1.81 × 10⁻⁵) / (2.624 × 10⁻⁵))^0.33))

h = 6.1036 w/m².k

so from the steam table, saturated steam at 17.70 bar, temperature of steam will be 105.383°C

so to find the rate of heat transfer Q

Q = hAΔT

Q = 6.1036 × (2π × 0.03375 × 34.7) × (105.383 - 27)

Q = 3518.61 watt

Therefore the rate of heat transfer changes to 3518.61 watt

Answer:

The outer diameter of the ball is 6.2138 cm

Explanation:

The formula to apply is ;

Heat loss ,

[tex]Q/t=kA*\frac{( T_1-T_2)}{d}[/tex]

where ;

Q/t=total heat loss from the ball = 1600 w

k=coefficient of heat transmission through the ball= 2.75 W/m.˚C

A=area in m² of the ball with the coefficient of heat transmission

T₁=Hot temperature

T₂=Cold temperatures

d=thickness of the ball

Area of spherical ball using internal diameter, 3cm= 0.03 m will be

Radius = half the diameter = 0.03/2 = 0.015

Area = 4 *π*r²

Area = 4*π*0.015² = 0.002827 m²

Apply the formula for heat loss to get the thickness as:

1600 = {2.75 * 0.002827 *(250-30 ) }/d

1600 =1.711/d

1600d = 1.711

d=1.711/1600 = 0.001069 m

d= 0.1069

Using internal radius and the thickness to get outer radius as;

3 + 0.1069 = 3.1069 cm

Outer diameter will be twice the outer radius

2*3.1069 = 6.2138 cm

Answer:

it should be accuracy

Explanation:

Answer:

option C

Explanation:

Answer:

is it multiple choice or....

Answer:

Yes, this is completely independent.

Explanation:

Yes, this is completely independent. Even though there are no South American individuals that are majoring in biomedical engineering in this party it is still a completely independent factor. The origin of birth of an individual does not tie them to a specific degree or field of expertise, therefore a South American individual can study anything they want including mechanical engineering, electrical engineering, or biomedical engineering.

1. When the interviewer asked if you have any questions at the end of the interview don't say no. You should always say yes your interviewer is expecting you to ask a few good questions before ending the interview.

2. Always thank the interviewer for their time and effort to interview you. This would look very good for you and its a nice way to help wrap up the interview.

Answer: the cancer risk for an adult male drinking the water for 10 years is 2.88 × 10⁻⁶

Explanation:

firstly, we find the time t required to travel for the contaminant to the well;

Given that, contamination flowing rate = 0.5 ft/day

Distance of well from the site = 1 mile =  5280 ft

so t = 5280 / 0.5 = 10560 days

k is given as 1.94 x 10⁻⁴ 1/day

next we find the Pollutant concentration Ct in the well

Ct = C₀ × e^-( 1.94 x 10⁻⁴ × 10560)

Ct = 0.3 x e^-(kt)  

Ct= 0.0386 mg/L

next we determine the chronic daily intake, CDI

CDI =  (C x CR x EF x ED) / (BW x AT)

where C is average concentration of the contaminant(0.0368mg/L), CR is contact rate (2L/day), EF is exposure frequency (350days/Year), ED is exposure duration (10 years), BW is average body weight (70kg).

now we substitute  

CDI = (0.0368 x 2 x 350 x 10) / ((70x 365) x 70)

= 257.7 / 1788500

= 0.000144 mg/Kg.day

CDI = 1.44 x 10⁻⁴ mg/kg.day  

Finally we calculate the cancer risk, R

Slope factor SF is given as 0.02 Kg.day/mg

Risk, R = I x SF

= 1.44 x 10⁻⁴ mg/kg.day  x 0.02Kg.day/mg    

R = 2.88 × 10⁻⁶

therefore the cancer risk for an adult male drinking the water for 10 years is 2.88 × 10⁻⁶

The final specific internal energy : 190 kJ/kg

The laws of thermodynamics 1 state that: energy can be changed but cannot be destroyed or created  

The equation is:  

[tex]\tt E_{in}-E_{out}=\Delta E~system\\\\\Delta E=\Delta U+\Delta KE+\Delta PE\\\\\Delta U=m(U_2-U_1)\\\\Q-W=\Delta U+\Delta KE+\Delta PE[/tex]  

Energy owned by the system is expressed as internal energy (U)  

This internal energy can change if it absorbs heat Q (U> 0), or releases heat (U <0). Or the internal energy can change if the system does work or accepts work (W)  

The sign rules for heat and work are set as follows:  

• The system receives heat, Q +  

• The system releases heat, Q -  

• The system does work, W -  

• the system accepts work, W +  

A closed system of mass 20 kg⇒m=20 kg

Heat transfer of 1000 kJ from the system to the surroundings⇒Q=-1000 kJ

The work done on the system is 200 kJ⇒W=+200 kJ

The initial specific internal energy of the system is 250 kJ /kg⇒U₁ = 250 kj/kg

Neglect changes in kinetic and potential energy⇒ΔKE+ΔPE=0, so

Q-W = ΔU

Input in equation

[tex]\tt -1000-200=20(U_2-250)\\\\-1200=20U_2-5000\\\\3800=20U_2\\\\U_2=190~kJ/kg[/tex]

Answer:

science is hard but human cloning this is legendary but still its up to the government but me i would allow this because its something that science can upgrade to

Explanation:

Answer:

hello your question lacks the required diagram attached below is the diagram

answer : 58.47 N

Explanation:

The magnitude of the force acting on the Pin D

Fd = [tex]\sqrt{Dx^2 + Dy^2}[/tex]

    = [tex]\sqrt{16.80^2 + 56^2}[/tex]

    = 58.465 N

Dx = 16.80 N

Dy = 56 N

hello attached below is the detailed solution