The question is incomplete, the complete question is;
The rate of reaction was measured during a chemical reaction. After the first 3 seconds, the rate of reaction was 1.8 x10−6 M/s. Which of the following would you expect after another 3 seconds? a
The rate would be higher, and the concentration of reactants would be lower.
b
The rate would be higher, and the concentration of reactants would be higher.
c
The rate would be lower, and the concentration of reactants would be lower.
d
The rate would be lower, and the concentration of reactants would be higher.
Answer:
The rate would be lower, and the concentration of reactants would be lower.
Explanation:
The rate of reaction refers to how quickly or slowly the reactants disappear or the products appear in a given reaction. The rate of reaction depends on the concentration of the reactants. Thus, as concentration decreases with time, the rate of reaction decreases accordingly.
Therefore, reaction rates tend to decrease with time since the concentration of the reactants decrease with time as the reactants are being converted into products. Thus after three seconds, the rate would be lower, and the concentration of reactants would be lower. Hence the answer above.
Answer:
The rate would be lower, and the concentration of reactants would be higher.
Explanation:
I took the test and i think i got it right
In the coal-gasification process, carbon monoxide is converted to carbon dioxide via the following reaction: CO (g) H2O (g) CO2 (g) H2 (g) In an experiment, 0.35 mol of CO and 0.40 mol of H2O were placed in a 1.00-L reaction vessel. At equilibrium, there were 0.19 mol of CO remaining. Keq at the temperature of the experiment is __________. A) 5.47 B) 1.0 C) 1.78 D) 0.75 E) 0.56
Answer: [tex]K_{eq}[/tex] at the temperature of the experiment is 0.56.
Explanation:
Moles of [tex]CO[/tex] = 0.35 mole
Moles of [tex]H_2O[/tex] = 0.40 mole
Volume of solution = 1.00 L
Initial concentration of [tex]CO[/tex] = [tex]\frac{0.35mol}{1.00L}=0.35M[/tex]
Initial concentration of [tex]H_2O[/tex] = [tex]\frac{0.40mol}{1.00L}=0.40M[/tex]
Equilibrium concentration of [tex]CO[/tex] = [tex]\frac{0.19mol}{1.00L}=0.19M[/tex]
The given balanced equilibrium reaction is,
[tex]CO(g)+H_2O(g)\rightleftharpoons CO_2(g)+H_2(g)[/tex]
Initial conc. 0.35 M 0.40 M 0 M 0M
At eqm. conc. (0.35-x) M (0.40-x) M (x) M (x) M
Given: (0.35-x) = 0.19
x= 0.16 M
The expression for equilibrium constant for this reaction will be,
[tex]K_{eq}=\frac{[CO_2]\times [H_2]}{[CO]\times [H_2O]}[/tex]
Now put all the given values in this expression, we get :
[tex]K_{eq}=\frac{0.16\times 0.16}{(0.35-0.16)\times (0.40-0.16)}[/tex]
[tex]K_{eq}=\frac{0.16\times 0.16}{(0.19)\times (0.24)}=0.56[/tex]
Thus [tex]K_{eq}[/tex] at the temperature of the experiment is 0.56.
what is the major organic product obtained from the following sequence of reactions 1. naoch2ch3 ch3ch2oh 2. ph br 1. naoch2ch3 ch3ch2oh 2. br 1. lialh4 et2o 2. h3o
Really stuck on this question !! Pls help
Answer:
can not be determined
Explanation:
because when I tried to calculate it it didn't give me the answer options that was in the pic so it's definitely C
does anyone know if this is positive,negative or neutral?
Answer:
HERE
Explanation:
Question:
Does anyone know if this is positive,negative or neutral?
Answer:
Netarual
Explanation:
I but the Images down below
PLEASEEE HELP!!!! ILL MARK BRAINLESS FIRST PERSON!!!!!
Answer:
A. it should have a cell wall to give it structure
what will the sun become when it dies
Answer:
It will become a red giant
Explanation:
When the sun runs out of its hydrogen fuel and the hydrogen atoms are combined together to make helium atoms, it expands into a red giant, which is made up of helium atoms and gases.
please need help..
no attachments thankyou
1. A sample of a chemical compound has 2.96g carbon, 0.414g hydrogen, 0.675g oxygen and 2.96 sulphur.
calculate it's empirical formula.
2.if it's mass was 972g, determine its molecular formula.
Answer:
1. The empirical formula => C₆H₁₀OS₂
2. Molecular formula => C₃₆H₆₀O₆S₁₂
Explanation:
1. Determination of the empirical formula.
Carbon (C) = 2.96 g
Hydrogen (H) = 0.414 g
Oxygen (O) = 0.675 g
Sulphur (S) = 2.96 g
Divide by their molar mass
C = 2.96 / 12 = 0.247
H = 0.414 / 1 = 0.414
O = 0.675 / 16 = 0.042
S = 2.96 / 32 = 0.0925
Divide by the smallest
C = 0.247 / 0.042 = 6
H = 0.414 / 0.042 = 10
O = 0.042 / 0.042 = 1
S = 0.0925 /0.042 = 2
Therefore, the empirical formula is
C₆H₁₀OS₂
2. Determination of the molecular formula.
Molar mass of compound = 972 g/mol
Empirical formula => C₆H₁₀OS₂
Molecular formula =>?
Molecular formula = [C₆H₁₀OS₂]ₙ
Molecular formula = molar mass of compound
Thus,
[C₆H₁₀OS₂]ₙ = 972
[(12×6) + (10×1) + 16 + (32×2)]n = 972
[72 + 10 + 16 + 64]n = 32
162n = 972
Divide both side by 162
n = 972 / 162
n = 6
Molecular formula = [C₆H₁₀OS₂]ₙ
Molecular formula = [C₆H₁₀OS₂]₆
Molecular formula = C₃₆H₆₀O₆S₁₂
A solution with a pH of 5.30 has a H+ concentration of
Answer:
5.01 x 10^-6 M
Explanation:
PH= -log [H+]
[H+] = 10^-PH
what is the largest recognized landmasses?
Answer:
The continents are, from largest to smallest: Asia, Africa, North America, South America, Antarctica, Europe, and Australia.
Explanation:
There ya go Hope this helped
How does artificial selection change a population over time?
How many watts do I consume if I eat a 600 Calorie sandwich in 600 seconds
Answer:
1 watt is conduned by you ok
Help plz:)))I’ll mark u Brainliest
Answer:
2.475 mol of O2 formed.
Explanation:
Given 1.65 moles of KClO3 as the target amount in the reactant, used the coefficient of the balanced chemical reaction involved to determine the number of moles of O2 molecules formed.
x mole of O2 = 1.65 mol KClO3 x [(3 mol O2)/ (2 mol KClO3)] = 2.475 mol of O2
x mole of O2 formed = 2.475 mol of O2
!!!!!!
According to the following reaction, how many moles of dinitrogen
monoxide will be formed upon the complete reaction of 0.192 moles
ammonium nitrate?
ammonium nitrate (aq)
>dinitrogen monoxide (g) +
water (1)
…moles dinitrogen monoxide
Answer:
0.192 mol N₂O
Explanation:
Step 1: Write the balanced equation
NH₄NO₃(aq) ⇒ N₂O(g) + 2 H₂O(l)
Step 2: Establish the appropriate molar ratio
According to the balanced equation, the molar ratio of NH₄NO₃ to N₂O is 1:1.
Step 3: Calculate the number of moles of N₂O formed upon complete reaction of 0.192 moles of NH₄NO₃
We will use the previously established molar ratio.
0.192 mol NH₄NO₃ × 1 mol N₂O/1 mol NH₄NO₃ = 0.192 mol N₂O
Base your answer on the equation and diagram below represent an electrochemical cell at 298 K and 1 atmosphere.
When the switch is closed, electrons flow from
A) Ag+(aq) to Mg2+(aq)
B) Mg(s) to Ag(s)
C) Ag(s) to Mg(s)
D) Mg2+(aq) to Ag+(aq)
When the switch is closed, electrons flow from the solid magnesium electrode, Mg(s) to solid silver electrode, Ag(s).
Electronegativity of metals
Electronegativity of metals refers to the ability of the atoms of metallic elements to attract electrons from the other metallic elements.
Electronegativity increases down the activity series.
Silver (Ag) will have more tendency to attract electron more than magnesium (Mg).
Thus, when the switch is closed, electrons flow from the solid magnesium electrode, Mg(s) to solid silver electrode, Ag(s).
Learn more about electronegativity here: https://brainly.com/question/24977425
#SPJ2
TRUE or FALSE: We have 2 copies of each gene because we have 2 parents.
What is a cell? ♀️
Answer:
Cell is defined as the smallest unit or basic unit of life.
the smallest part of a living thing that can carry out the activities needed for life. Basically the unit of all forms of life.
Explanation:
hope this helps in anyway :)
Which of the following is NOT an indication that a chemical reaction has taken place?
Answer:
WHERE ARE THE CHOICES?
PLEASE MAKE SURE THAT YOUR QUESTION IS RIGHT BEFORE POSTING IT シ︎
Change of state of matter is not an indication that a chemical change has taken place.
What is matter?Matter is a substance which is made up of various types of particles which occupy space and have inertia . All living things and objects are made up of various types of particles that occupy space and have inertia .
Depending on temperature and other factors matter is able to exist in different phases. Most common of which are solid, liquid and gas. Matter can exist in more than one state depending on the temperature and pressure .
State of matter can be changed by heating or cooling and even by changing the applied pressure.When a state changes matter does not break rather its state changes though its chemical composition remains same.
Physical characteristics of matter are shape, color, size and temperature. Every matter is made up of elements which cannot be broken down further by ordinary chemical reactions.
Learn more about matter,here:
https://brainly.com/question/12972782
#SPJ6
Which molecule is shown below?
H
H-C-H
H
Η Η Η Η
H-C-C-C-C-C-C-H
1 | | |
H H H H H H
O A. 2-ethylhexane
B. 2-methylhexane
C. 3-ethylhexane
D. 3-methylhexane
Answer:
b. 2-methylhexane
Explanation:
ap3x approved
The molecule shown below is - 2-methylhexane and the correct option is option B.
What is IUPAC Nomenclature?
The IUPAC system of nomenclature is a set of logical rules framed which are mainly aimed at giving an unambiguous name to an organic compound.
IUPAC stands for International Union of Pure and Applied Chemistry
A prefix to the name comes before the molecule. The prefix of the molecule's name is based on the number of carbon atoms.
For example, a chain of six carbon atoms would be named using the prefix hex-.
The suffix to the name is an ending that is applied that describes the types of chemical bonds in the molecule.
The molecule has 6 carbon atoms and a methyl group at the second position.
Therefore, The molecule is 2-methylhexane and the correct option is option B.
Learn more about IUPAC Nomenclature, here:
https://brainly.com/question/30086566
#SPJ7
other two substances present in breathed out air
Answer:
Gases we Breathe Out
It is the same air that we inhale. ... The amount of inhaled air contains 21% of oxygen and 0.04% of carbon dioxide, while the air we breathe out contains 16.4% of oxygen and 4.4% of carbon dioxide.
Answer:
Inhaled air is by volume 78% nitrogen, 20.95% oxygen and small amounts of other gases including argon, carbon dioxide, neon, helium, and hydrogen. The gas exhaled is 4% to 5% by volume of carbon dioxide, about a 100 fold increase over the inhaled amount.
Calculate the volume of 0.250 M H2SO4 that contains 0.00255 mol H2SO4.
Answer:
0.0102 L or 10.2 mL
Explanation:
From the question given above, the following data were obtained:
Molarity = 0.250 M
Mole = 0.00255 mole
Volume =?
Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:
Molarity = mole / Volume
With the above formula, we can obtain the volume as follow:
Molarity = 0.250 M
Mole = 0.00255 mole
Volume =?
Molarity = mole / Volume
0.250 = 0.00255 / volume
Cross multiply
0.250 × volume = 0.00255
Divide both side by 0.250
Volume = 0.00255 / 0.250
Volume = 0.0102 L
Covert 0.0102 L to mL.
1 L = 1000 mL
Therefore,
0.0102 L = 0.0102 L × 1000 / 1 L
0.0102 L = 10.2 mL
Thus, the volume is 0.0102 L or 10.2 mL
Can you tell me any chemical reaction that occur due to kinetic energy
Answer:
The molecules in gasoline (octane, the chemical formula shown) contain chemical energy. This energy is transformed into kinetic energy that allows a car to race on a racetrack.
What happens to the rate constant as activation energy increases?
A. The rate constant decreases.
B. The rate constant levels off.
C. The rate constant does not change.
D. The rate constant increases.
Answer:
A. The rate constant decreases
Explanation:
i took the quiz on a pex and it was correct
please help ME WITH CHEM I DONT HAVE ENOUGH TIME! calculate the number of hydrogen molecules that it would have contained at stp if it had a volume of 200,00m cubed.
We know that, at STP, one mole of a gas occupies 22.4 L of volume
we'll use the same principle to solve this problem
Converting given volume to Liters:
We know that 1 m³ = 1000 L
So, 20000 m³ = (20000)*(1000) L = 2 * 10⁷ L
Converting Liters to moles:
As mentioned above, at STP, one mole occupies 22.4 Liters
Number of moles in 2 * 10⁷ L = 2 * 10⁷ / 22.4
Number of moles = 8.9 * 10⁵ moles
Converting moles to number of particles:
We know that 1 mole contains 6.022 * 10²³ molecules
So, 8.9 * 10⁵ moles contain [(8.9 * 10⁵) * (6.022 * 10²³)] molecules
Number of molecules = 53.6 * 10²⁸ molecules
In proper scientific notation:
Number of molecules = 5.36 * 10²⁹ molecules
How does carbonic acid work to maintain blood pH? (Select all that apply.) Check All That Apply When blood is too basic, carbonic acid can ionize to bicarbonate and H+ ions, adding H+ ions to the blood. When blood is too basic, carbonic acid can ionize to bicarbonate and H+ ions, adding H+ ions to the blood. When blood becomes too acidic, bicarbonate combines with extra H+ ions to form carbonic acid, removing H+ ions from the blood. When blood becomes too acidic, bicarbonate combines with extra H+ ions to form carbonic acid, removing H+ ions from the blood. Carbonic acid is added to the blood until the pH reaches 7.4. Carbonic acid is added to the blood until the pH reaches 7.4. Carbonic acid always lowers the blood pH to 7.4. Carbonic acid always lowers the blood pH to 7.4. Carbonic acid can raise or lower the pH of blood. Carbonic acid can raise or lower the pH of blood.
Answer:
When blood is too basic, carbonic acid can ionize to bicarbonate and H+ ions, adding H+ ions to the blood.
When blood becomes too acidic, bicarbonate combines with extra H+ ions to form carbonic acid, removing H+ ions from the blood.
Carbonic acid can raise or lower the pH of blood.
Explanation:
A buffer is a solution that resists changes to its pH when small quantities of acids or bases are added to it. The human blood serves as a buffer as it contains a buffer of carbonic acid (H2CO3) and bicarbonate anion (HCO3-) which serves to maintain blood pH between 7.35 and 7.45. Other buffering systems in blood exist such as the Hydrogen ion and oxygen gas which affects oxygen binding to haemoglobin, however the carbonic-acid-bicarbonate buffer is the most important buffer for maintaining acid-base balance in the blood.
A buffer solution is made up of an acid and its conjugate base or a base and its conjugate acid. For carbonic acid-bicarbonate buffer, carbonic acid serves as the acid while bicarbonate serves as the base. When a little quantity of a base as hydroxide ions is added to a buffer, the acid reacts with it and remove it from the solution. On the other hand, when a little quantity of an acid as hydrogen ions are added to a buffer, the conjugate base reacts with it and remove it from the solution, thus keeping the pH of the solution fairly constant.
In the carbonic acid-bicarbonate buffer:
When blood is too basic, carbonic acid can ionize to bicarbonate and H+ ions, adding H+ ions to the blood.
When blood becomes too acidic, bicarbonate combines with extra H+ ions to form carbonic acid, removing H+ ions from the blood.
Thus, carbonic acid can raise or lower the pH of blood.
Carbonic acid work to maintain blood pH as follows:
When blood is too basic, carbonic acid can ionize to bicarbonate and H+ ions, adding H+ ions to the blood.When blood becomes too acidic, bicarbonate combines with extra H+ ions to form carbonic acid, removing H+ ions from the blood.Carbonic acid can raise or lower the pH of blood.WHAT IS BUFFER SOLUTION:A buffer is a solution that resists changes to its pH when small quantities of acids or bases are added to it. A buffer is made up of an acid and its conjugate base or a base and its conjugate acid. Carbonic acid is an example of buffer that contains an acid with it's conjugate base.This means that, carbonic acid works to maintain blood pH as follows:
When blood is too basic, carbonic acid can ionize to bicarbonate and H+ ions, adding H+ ions to the blood.When blood becomes too acidic, bicarbonate combines with extra H+ ions to form carbonic acid, removing H+ ions from the blood.Carbonic acid can raise or lower the pH of blood.Learn more about buffers at: https://brainly.com/question/24188850
If the acid dissociation constant, Ka, for an acid HA is 8 x 104 at 25°C, what percent of the acid is dissociated
in a 0.50 M solution of HA at 25°C?
A
08%
Answer:
Percent dissociated = 3.92%
Explanation:
The equilibrium of the weak acid, HA, is:
HA ⇄ H⁺ + A⁻
Where Ka = 8x10⁻⁴ is: [H⁺] [A⁻] / [HA]
As both H⁺ and A⁻ comes from the same equilibrium we can write the concentrations of the species as follows:
[H⁺] = X
[A⁻] = X
[HA] = 0.50M - X
Where X is reaction coordinate
Replacing:
8x10⁻⁴ = X² / 0.50-X
4x10⁻⁴ - 8x10⁻⁴X - X² = 0
Solving for X:
X = -0.02M. False solution. There is no negative concentrations
X = 0.0196M. Right solution.
Replacing:
[A⁻] = 0.0196M
Percent of the acid that is dissociated is:
[A⁻] / [HA]₀ * 100
[HA]₀ is its initial concentration = 0.50M
0.0196M / 0.50M * 100
Percent dissociated = 3.92%PLEASEEE PLEASEE HELP THIS IS MY FINAL EXAM AND I HAVE 30 MINS REMAINING
You have 5 moles of O2. How many moles of CO2, are produced?
Answer:
1
Explanation:
1234567891011121314151617181920
Which of the following is an example of an environmental impact of agriculture?
high use of mineral resources
high use of water
high use of gold, copper, and silver
high use of rock supplies
Answer:
high use of mineral resources
Explanation:
brainliest pls
When ammonium nitrate dissolves in water, the solution becomes cold.
NH4NO3(s) <-> NH4+(aq) + NO3-(aq)
The reaction is thermodynamically favorable. The signs of ΔG and ΔS for the reaction are which of the following?
A.
B.
C.
D.
B.
Delta G is negative and Delta S is positive.
Please help will give brainliest
Perform the following
mathematical operation, and
report the answer to the correct
number of significant figures.
328 x 0.125 = [?]
Answer: 41.0
Explanation: When you multiply the two numbers you get 41 but you need to have the same amount of significant numbers as the number in the problem with the least significant numbers. I hope this helps
Part F
Using what you have learned in the above questions, calculate the minimum amount of water (in liters) that would be required to completely
dissolve 5.Og AgBr.
Using this same calculation, calculate the minimum amount of water (In liters) that would be required to completely dissolve 26 silver lons.
Answer: did you ever find the answer? I need part E, F, and G if you found them please!!!!! I’m begging, my school year ends in 30 minutes and I gotta get this submitted!!!!!!
Explanation: