The number of ubatomic particle in an ion i different from the number in a neutral element. Complete figure 1 to how the miing information about each ion

Oxygens are present on the reactants side of this equation is 3

Reactant is a substance that enters into and is altered in the course of a chemical reaction and the substance to the left of the arrow in a chemical equation are called reactant and a reactant is a substances that is present at the start of a chemical reaction and the substances to the right arrow are called product and a product is a substances that is present at end of chemical reaction

Here given reaction is

KCIO₃  → KCI + O₂

Here 3 oxygen atom are seen in the reactant so 3 oxygen atom are in the reactant side in the equation

Know more about oxygens

https://brainly.com/question/22394338

#SPJ1

The enthalpy change (in KJ) of the chemical reaction that raises the temperature of the solution by 2.40 °C is 8.976×10⁻³ KJ

We'll begin by obtainig the mass of the solution. This can be obtained as follow:

Mass = density × volume

Mass of solution = 1.25 × 250

Mass of solution = 312.5 g

Next, we shall determine the heat energy absorbed by the solution. This can be obataned as follow:

Q = MCΔT

Q = 312.5 × 3.74 × 2.4

Q = 2805 J

Finally, we shall detetrmine the enthalpy change. This can be obtained as follow:

Q = m × ΔH

2.805 = 312.5 × ΔH

Divide both sides by 312.5

ΔH = 2.805 / 312.5

ΔH = 8.976×10⁻³ KJ

Thus, the enthalpy change is 8.976×10⁻³ KJ

Learn more about enthalpy change:

https://brainly.com/question/24170335

https://brainly.com/question/12031167

#SPJ1

Answer:

There are 2 modes in O2.

O2 is dioxygen.

Explanation:

Two oxygen atoms joined together for dioxygen.

Also, for reference, the prefix "di" means "two," "twice," or "double."

On performing the operation, we get 0.72

The operation is 3.0x104/4.0x108=312/432=0.72

To learn more about division visit:

brainly.com/question/21416852

#SPJ1

The orange circle is the colored form that Gillian won't require for her version of the chain of electron transport.

Many physical processes, such as gravity, electrical interactions, weak interplay, electricity, magnets, chemistry, & thermal conductivity, depend on electrons.

A negatively charged particle known as an electron can either be free or attached to an atom (not bound). One of the three main types of atoms within an atom is an electron that is bonded to it; the other two were protons and neutrons.

To know more about Electron visit:

https://brainly.com/question/1255220

#SPJ4

Pressure is a large and continuous force that is either exerted or given on or against an object or thing by something coming into contact with it.

Hope this helps! :)

Remove the sample from the sample chamber, turn off the light bulb and clean up around the spectrophotometer.

There are methods for determining the concentration of a sample. Here are our options. UV Photomedium The correct answer for the UV spectrum is all I need? This allows me to determine the concentration in the UV spectrum photometer. Absorption of visible light by compounds creates distinct spectra. Different spectrum is what it means. you can see what it looks like. Interaction bits are between light and matter. If a sample is given here and absorbs light, allowing an absorber to absorb it, a different spectrum will be seen.

To know more about spectrophotometer

https://brainly.com/question/24195565

#SPJ4

The value of Δ[tex]S^{o}[/tex] for the surrounding when 2.41 moles of [tex]H_{2}[/tex] gas react at standard condition is 48.2 J/K.

Entropy change can be defined as the difference between the entropies of all the reactants and products multiplied by the corresponding number of moles for each.

Δ[tex]S_{rxn}[/tex] = Σ(n ×  [tex]S_{product}[/tex]) - Σ(n ×  [tex]S_{reactant}[/tex])

where, n = number of moles

For the given reaction:

[tex]H_{2}[/tex](g) + [tex]Cl_{2}[/tex](g) = [tex]2HCl[/tex](g)

The standard absolute entropies (S) are:

[tex]H_{2}[/tex] = 131 J/K .mole

[tex]Cl_{2}[/tex] = 223 J/K .mole

[tex]HCl[/tex] = 187 J/K .mole

On putting these values in above equation for calculating entropy change:

Δ[tex]S_{rxn}[/tex] = 2 × 187 - (131 + 223)

Δ[tex]S_{rxn}[/tex] = 374−131−223 = 20 J/K .mole

Entropy change of the surroundings when 1 mole of [tex]H_{2}[/tex] reacts  = 20 J/K .mole

Now, when 2.41 moles of [tex]H_{2}[/tex] react, the entropy change of surrounding can be calculated as = 20 × 2.41 = 48.2 J/K

Therefore, the value of Δ[tex]S^{o}[/tex] when given moles of [tex]H_{2}[/tex] react is 48.2 J/K.

To know more about entropy change problems, visit:

https://brainly.com/question/15050709

#SPJ4

The molar mass of the unknown gas will be 70.75 g / mol.

What is graham law?

Graham's law states that the rate of diffusion or of effusion of a gas is inversely proportional to the square root of its molecular weight.

R1 / R2 = √ M2 / M1

            = t2 / t1

Rn2/ R unknown = √ M unknown / Mn2

M unknown / 28gm/mol      =  t unknown / t N2

                           = 337 x 337 / 212 x 212 sec

                           = 337 x 337 x 28 / 212 x 218

                           = 70.75 gm / mol

The molar mass of the unknown gas will be 70.75 g / mol.

To know more about Graham's law from the given link

https://brainly.com/question/27968061

#SPJ4

Answer:  3.39 moles

Explanation:

Answer:

3.39

Explanation:

The molecular formula for Neon is Ne. The SI base unit for the amount of substance is the mole. 1 grams of Neon is equal to 0.049554750566163 moles.

The molarity of Na₃PO₄ in the solution is 1 M.

What is molarity?
Molar concentration, also known as molarity, amount concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume. The number of moles per litre, denoted by the unit symbol mol/L as well as mol/dm3 in SI units, is the most widely used unit for molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.

From the question,

We are to determine the molarity of the solution.

First, we will determine the number of moles of the solute (Na₃PO₄) present

Mass of Na₃PO₄ = 82 g

Using the formula

[tex]number of moles = mass/molar mass[/tex]

Molar mass of Na₃PO₄ = 163.94 g/mol

∴ Number of moles of Na₃PO₄ present = [tex]82/163.94[/tex]

Number of moles of Na₃PO₄ present = 0.500 moles

Now, for the molarity of the solution

Using the formula
Molarity = no. of moles/volume

Volume of the solution = 500 mL = 0.5 L

∴ Molarity of the solution = [tex]0.500/0.5[/tex]

Molarity of the solution = 1 M

Hence, the molarity of the solution is 1 M.

To learn more about molarity click on the given link:

https://brainly.com/question/14469428

#SPJ4

Groups of elements that should have very similar chemical properties are:

Correct Answer: letter C.

This is because they are all in the same column of the periodic table.

This column is called the alkali metals. The alkali metals are the elements in group 1 of the periodic table. They are all very reactive, due to the fact that they only have one valence electron in their outermost energy level. This makes them very prone to losing that electron, which is why they are often found in compounds rather than in their pure form. The most common alkali metal is sodium, which is found in table salt.

Based on the periodic table, which of the following groups of elements should have very similar chemical properties?

Group of answer choices:

A. potassium (K), aluminum (Al), neon (Ne)

B. carbon (C), iodine (I), hydrogen (H)

C. lithium (Li), sodium (Na), potassium (K)

D. manganese (Mn), magnesium (Mg), molybdenum (Mo)

Learn more about properties of the elements:

https://brainly.com/question/13080138

#SPJ4

The statement which is not correct about Fuel is that wood does not burn.

Hence, option D is not correct

What do you mean by Fuel?

Fuel can be defined as any substance that upon combustion produces a usable amount of energy which is generally  known as fuel.The characteristics of good fuel includes that  it should have a high calorific value,  environment-friendly and should burn completely without leaving any residue. Fuel should be cheap and readily available. The burning of wood will include an indirect reaction.

Examples include : wood, coal, biogas, LPG, petrol, diesel etc.

Types of Fuels:

Hence, The statement which is not correct about Fuel is that wood does not burn.

Hence, option D is not correct

To know more about fuel from the given link

https://brainly.com/question/28738695

#SPJ4

The element could be X is phosphorus .

What is element?

An element is the fundamental item that can't be easily broken onto smaller of pieces. In chemistry and physics, an elementary is a substance that can't be broken down by non-nuclear reactions. In computing and the  mathematics, an element is the  distinct piece of a larger system or set.

An ionic compound is formed by the ions, which their charges replaced, so the compound Na₂X is formed by the ions Na⁺ and X⁻². Thus, X must gain two electrons to be stable at the octet, so it has 6 valence electrons. Because it can accommodate up to 12 electrons, the element expands the octet, do it must be in the 3rd period or higher.

To know more about element click-

https://brainly.com/question/18096867

#SPJ1

Answer:

the correct answer is C.

Explanation:

Zn3(PO4)2 is the chemical formula for Zinc phosphate.

The chemical formula for zinc (II) phosphate is Zn₃(PO₄)₂. Therefore, option C is correct.

Zinc (II) phosphate is an inorganic compound. It is composed of zinc cations (Zn²⁺) and phosphate anions (PO₄³⁻). The Roman numeral "II" in the compound name indicates that the oxidation state of the zinc ion is +2.

Zinc (II) phosphate is a white crystalline solid that is insoluble in water. It is commonly used in various applications, including as a corrosion inhibitor in coatings and paints, as a component in dental cement, and as a nutrient supplement in some fertilizers.

Learn more about Zinc phosphate, here:

https://brainly.com/question/28959000

#SPJ6

Must first be inspected in oil sample analysis, low pressure intake circuit for leaks. Correct asnwer: letter C.

Oil analysis helps prevent engine damage by identifying potential problems and addressing them before they cause major damage. By monitoring the health of your engine oil, you can avoid costly repairs and extend the life of your engine.

Some ways to prevent engine damage from occurring include:

Additionally, oil analysis can help identify potential problems early on, allowing you to take corrective action before major damage occurs.

The group of options with respect to the question, which of the following should be inspected first? Son:

A) Tribology

B) engine off, engine hot: syringe at mid-sump level

C)  low pressure intake circuit for leaks

D) thick film and boundary

Correct answer: letter C.

Learn more about engine damage:

https://brainly.com/question/28404358

#SPJ4

In chemical reactions, there are open-chain compounds and closed-chain compounds. (Answer look at the picture)

Open-chain compounds (Aliphatic) are carbonate compounds with chains that do not meet between ends, saturated or unsaturated both branched and unbranched.

Closed-chain compounds is a term in chemistry used for compounds whose atoms are joined together to form rings. The number of elements making up the ring varies and is more than three. The elements that make up the cycle are also different from the elements carbon (carbon cycle), elements other than carbon (inorganic cycle), or both (heterocyclics).

Cyclic compounds can be called aromatic if they meet several conditions, namely:

Learn more about open-chain compounds at https://brainly.com/question/12947948

#SPJ4

The question is not scientific as it measures weight with a unit of mass.

Mass of water filling the flask =268.92 g - 93.667 g = 175.25 g . Molecular weight of the flask = 175.25 g / (1.00 g/cm^3) = 284.4 cm^3.

A given molecule's mass, expressed in daltons, is known as its molecular mass. Because different isotopes of an element are present in different molecules of the same compound, their molecular masses can vary. The mass of a substance per mole is its molecular weight. Typically, grams per mole are used to measure this. Molecular weight, also known as molecular mass, is the mass of a substance's molecules, based on 12 as the carbon-12 atom's atomic weight. In real life, it is calculated by adding the atomic weights of the atoms in the compound's molecular formula. The properties of a polymer are inversely correlated with its molecular weight. Mechanical properties typically increase as the molecular weight does.

Learn more about Molecular weight here:

https://brainly.com/question/27988184

#SPJ4

Answer:

The answer is D

Explanation:

Hope this helps!

In terms of supplying sufficient quantities of drinking water, the most important property of an aquifer is high permeability.

Anything over which a person or a company has legal ownership is considered property. Property can refer to both real objects, like homes, automobiles, or appliances, as well as intangible items with the potential for future value, like stock and bond certificates.

Anything that someone, whether a person or a company, has a legal claim to is referred to be property. The owners have some enforceable rights over it because they have a legal title. It can fall into one of two categories: tangible or intangible. Automobiles, business equipment, furniture, and real estate are examples of tangibles.

Property Assets include any land, buildings, and all improvements thereon as well as any rights to the aforementioned.

Learn more about property:

https://brainly.com/question/27470882

#SPJ4

The percentage purity of the chalk would be 88.82%.

The percentage purity of a compound is a measure of how pure the compound is.

In this case, the percent purity of the chalk is calculated as:

Percentage purity = mass of calcium carbonate/mass of chalk x 100%

From the equation of the reaction:[tex]CaCO_3 + 2 HCl --- > CaCl_2 + CO_2 + H_2O[/tex]

0.36 L of carbon dioxide was collected at STP.

Recall that: 1 mole of gas at STP = 22.4 L

Thus, 0.36 L of carbon dioxide at STP would be:

0.36/22.4 = 0.0161 mol

From the equation of the reaction, the mole ratio of carbon dioxide produced to calcium carbonate that reacted is 1:1. Thus, the equivalent mol of calcium carbonate that reacted would also be 0.0151 mol.

Molar mass of calcium carbonate = 100 g/mol

Mass of 0.0151 mol calcium carbonate = 0.0151 x 100

                                                                = 1.51 grams.

Percent purity of the chalk = 1.51/1.70 x 100

                                            = 88.82%

The percentage purity of the chalk is, therefore, 88.82%.

More on percentage purity can be found here: https://brainly.com/question/27966200

#SPJ1

Regioselectivity is the preference of chemical bonding or breaking in one direction over all other possible, stereospecific mechanism specifies the stereochemical outcome of a given reactant.

Regioselectivity occurs when two possible reaction products are regioisomers. Stereoselectivity exists when two possible reaction products are stereoisomers. Chemoselectivity occurs when a reactant within a substrate prefers one functional group over another. Markovnikov's law predicts the regiochemistry of his HX addition to unsymmetrically substituted alkenes.

The Zaitsev and Hoffman rule describes the principle of regioselectivity in elimination reactions. Regioselective means that the reaction selectively produces one regioisomer as the major product. The two alkenes are positional isomers because the double bonds are in different regions. A process that favors bond formation at certain atoms over other possible atoms.

Learn more about Regioselectivity here:-https://brainly.com/question/16410118

#SPJ4

The relative atomic mass of hydrogen 1.00

The atomic mass of an element is the average mass of the atoms of an element measured in atomic mass unit

Here given data is

99.30% of H atoms

0.70% H atoms

So we have to calculate the relative atomic mass of hydrogen. = ?

So the relative atomic mass = (isotope abundance × isotope mass) + (isotope abundance × isotope mass)

Relative atomic mass = (99.30% × 1) + (0.70% × 1)

Relative atomic mass = 1.00

Know more about hydrogen

https://brainly.com/question/25640729

#SPJ9

Element may have more than eight valence electrons around it when present in a covalent compound is phosphorous

Valence electron are the electron located at the outermost shell of an atom and an atom like phosphorous or sulfur which has more than an octet is said to have expanded its valence shell and this can only occur when the valence shell has enough orbitals to accommodate the extra electron for example in the case of phosphorous the valence shell has a principle quantum number n = 3 and the maximum number of electron possible in the valence shell of the second row element is eight however the element of third row such as phosphorous and sulfur can form stable system by sharing eight or more electron

Know more about element

https://brainly.com/question/10055601

#SPJ4

From the formula unit potassium carbonate, there are two potassium ions and one carbonate ion.

The term formula unit refers to the smallest unit of an ionic compound. Indicates the ratio of ions in a compound. For potassium carbonate, the unit of the formula is K₂CO₃.

In recent years, potassium carbonate (K₂CO₃.) has been extensively employed as a mild base catalyst in several chemical processes, including Knoevenagel and Nitroaldol Condensation O-alkylation the production of 2H-chromenes , and monomethylation reactions

there fore, From this formula unit we can see that there are two potassium ions and one carbonate ion.

learn more about Formula unit in details:

Brainly.com/question/19293051

#SPJ4

Letting the evaporation of methanol will be a mistake due to its toxic nature.

Methanol belongs to the functional group alcohol. Being volatile, it evaporates quickly. Moreover, it also absorbed quickly through the skin. The compound is highly toxic and the intake should be completely avoided.

Some of the common problems associated with methanol toxicity are different organs like respiratory system, Central nervous system and cardiovascular system along with metabolic acidosis. The symptoms of methanol poisoning are CNS depression, headache, confusion, dizziness, failure in muscle coordination. The metabolism of methanol into formic acid results in end organ toxicity which may be lethal.

Learn more about methanol -

https://brainly.com/question/14889608

#SPJ4

In this drama, a crucible would represent the constant building action leading to the climax of the pot.

What is crucible?

A crucible is a ceramic as well as metal vessel used to melt metals or subject other substances to extremely high temperatures. Crucibles can be made from any material that can withstand temperatures high enough to melt and otherwise change their contents, despite historically being most frequently made of clay. The crucible's shape has changed over time, with designs that take into account both regional variation and the process for that they are used. The earliest crucible forms date to Iran and Eastern Europe in the sixth or fifth millennia B.C.

Similar to the contents of a crucible, the characters seem to be constantly enduring severe trials; in this case, the witching trials. The crucible would, in my opinion, symbolize the town itself and its residents. The symbolism of this suggests a theme of the townspeople going through the witching trials and coming out with a "refined" lesson. The unnecessary accusations and trials will teach a hard lesson to the people who live within the town and influence their future.

To learn more about crucible click on the given link:
https://brainly.com/question/27816330
#SPJ4

there is a complex formed between iodine and many organic compound when you place the developed tlc plate in an iodine chamber

A commonly used semi-destructive visualization method is to expose a developed TLC plate to iodine  (I2)  vapor. An "iodine chamber" can be created by adding a few iodine crystals to a TLC chamber, or by adding a few iodine crystals to a chamber containing a portion of powdered silica or alumina (Figure 2.33a). When a developed TLC plate is placed in the chamber and capped, the iodine sublimes and reacts with the compounds on the plate, forming yellow-brown spots (Figure 2.33d). The coloration occurs because iodine forms colored complexes with many organic compounds. This stain will work with approximately half the compounds you may encounter.

This method is considered "semi-destructive" because complexation is reversible, and the iodine will eventually evaporate from the TLC plate, leaving the original compound behind. When the coloration fades, it is theoretically possible to use another visualization technique on the TLC plate, although it's possible the compound may have also evaporated by that time.

learn more about TLC here https://brainly.com/question/13086570

#SPJ4

Asnwer: average atomic mass of chromium is 52amu

Calculations:

49.946amu: 4.350%= 0.0435

51.941amu: 83.790%= 0.8379

52.941amu: 9.500%= 0.095

53.939amu: 2.360%= 0.0236

Average atomic mass of chromium = 0.0435(49.946) + 0.8379(51.941) + 0.095(52.941) + 0.0236(53.939)

= 51.9963703amu

= 52 amu

Should be aware of the R/S configuration CIP rules' priority ranking. A) -CECH (option A).

Stereocenter. An atom that is connected to four different atoms is known as a stereogenic center, and simply a stereocenter. A stereocenter, also known as a stereogenic center, is a particle group in which any two groups can be exchanged to produce a stereoisomer.

When a carbon is joined to four other atoms, or groups of atoms, chiral centers are created. Although they are mirror reflections of one another, chiral compounds are not identical. Stereocenters are also chiral centers, although not usually the other way around.

To know more about Stereocenters visit:

https://brainly.com/question/23096013

#SPJ4