TNT has a heat of combustion of -3406 kJ/mol compared to sugar's -5639 kJ/mol. TNT will blow up more quickly since it burns at a lower temperature. The heat-up time for sugar will be substantially longer.
What does explosion look like in TNT?A common way to convey energy is to use the term "TNT equivalent," which is often used to refer to the energy generated in an explosion. According to this convention, a ton of TNT is equal to 4.184 gigajoules, or around the amount of energy produced when a metric ton (1,000 kilograms) of TNT detonates.
How many gigajoules are there?The unit of measurement for energy consumption is the gigajoule (abbreviated as GJ), which is equal to one billion joules. At typical conditions, a gigajoule of natural gas is around 25.5 cubic meters. Approximately 27 liters of fuel oil, 39 liters of propane, 26 liters of gasoline, or 277 kilowatt hours of electricity are equivalent to one gigajoule of natural gas.
Learn more about explosives on:
https://brainly.com/question/24102834
#SPJ4
Why are 6 co2 molecules required during the calvin cycle to make one molecule of glucose?.
6 co2 molecules required during the calvin cycle to make one molecule of glucose beacuse One carbohydrate molecule requires six rounds of the Calvin cycle to create since it contains six carbon atoms (one for each carbon dioxide molecule fixed).
What is calvin cycle?
The C3 cycle is another name for the Calvin cycle. The process by which the carbon from the carbon cycle gets fixed into sugars is a series of chemical processes. The chloroplast of the plant cell is where it takes place.
Because the main stable intermediate is the 3-carbon compound glyceraldehyde-3-phosphate, C3-type plants—so named because it is their most frequent set of carbon fixation reactions—are observed. The Calvin cycle, which best describes these reactions.
The processes of photosynthesis that utilise the energy accumulated by the light-dependent reactions to create glucose and other carbohydrates molecules are known as the Calvin cycle.
To earn more about calvin cycle
Here: https://brainly.com/question/920840
#SPJ4
Which body systems within marching band members are interacting so they can play their instruments while walking in the parade? List the systems below.
Squirrel: Digestive, Circulatory, Muscular, and Nervous systems.
Soccer: Skeletal/muscular, circulatory, respiratory, and body systems.
What is body systems?For Squirrel:
The digestive system functions to break food down into smaller pieces that are more suitable for swallowing and absorbing the available nutrients. It transports to various cells of living organisms.
musculature allows animals to keep their balance on branches and avoid falling.
The nervous system controls all living things. The nervous system controls all physical activity. Among many other functions, it is involved in maintaining balance and maintaining alertness during meals.
Soccer player:
This person is trying to hit the ball to score a goal. He seems to be adjusting his arms and legs to allow this.
The muscular and skeletal systems work together to support and strengthen the body. They allow the movement of the whole body to reach the target.
The respiratory system is also involved in this person's running performance. He has to breathe constantly to get enough oxygen while running and exhaling exhaust fumes.
The circulatory system transports oxygen to various cells in the body that use it on demand, especially muscle cells. The system also removes waste.
The nervous system controls all physical activity. It performs a variety of functions, including maintaining balance and coordination while running, alerting other players and focusing on the ball, and controlling a player's thoughts and strategies during the game.
To know more about body systems click-
https://brainly.com/question/342055
#SPJ1
Nuclear decay occurs according to first-order kinetics. How long will it take for a sample of titanium-45 to decay from 65.0 grams to 25.0 grams? The half-life of titanium-45 is 3.08 hours 2.15 hours 32.9 hours 5.13 hours
A sample of titanium-45 will degrade from 65 grams to 25 grams in 4.24 hours.
The formula for the half-life of a first-order reaction is = 0.693/k.
Half-life is 3.08 hours, given.
So k = 0.225
First order reaction rate is calculated using:
where k is the reaction rate and 0.225 is the reaction time
R' = 25g, the total quantity.
original quantity = 65g
With these parameters entered, we obtain t=4.24 hours.
As a result, a sample of titanium-45 will degrade from 65.0 grams to 25.0 grams in 4.24 hours.
To know more about first-order reaction visit:-
https://brainly.com/question/1769080
#SPJ4
what component in the solar cell provides electrons to replace the electrons released by the dye?
The component in the solar cell system which provides electrons to replace the electrons released by the dye simply is the graphite layer.
How the graphite layer release electrons to replace the dye electronsThe graphite layer is one of the major parts oth the solar cell. It help in the provision of electrons by acting as a counter electrode within the electrolyte. In order, this layer is part responsible for replacing electrons produced by dyes.
In conclusion, we can now confirm from all said and done from above that the solar cell too has a way of producing electrons.
Read more on solar cell:
https://brainly.com/question/19483420
#SPJ1
which gas sample has the greater mass
Answer:
what are the gas samples
what volume of methane gas, ch4, has the same number of atoms as 6.00 l of krypton gas at the same temperature and pressure?
6l volume of methane gas, ch4, has the same number of atoms as 6.00 l of krypton gas at the same temperature and pressure.
The Avogadro's law can be used to connect the volume of the gas to its number of moles. This law asserts that at the same temperature and pressure, gases with the same molar amount will occupy the same volume. The number of atoms in the two gases must be equal if the number of moles is the same. Accordingly, if Kr and methane both have the same number of particles, their respective volumes would be the same.
To know more about Avogadros law visit
https://brainly.com/question/4133756
#SPJ4
vessel a contains co(g) at 0 oc and 1 atm. vessel b contains so2(g) at 20 oc and 0.5 atm. the two vessels have same volume. a. which vessel contains more molecules? b. which contains more mass? c. in which vessel is the average kinetic energy of molecules higher? d. in which vessel is the rms speed of molecules higher?
Vessel B has more mass. Explanation: Because temperature and average kinetic energy of molecules are directly proportional to each other.
The average kinetic energy of a substance's particles is directly inversely correlated with its temperature. As the temperature increases, the particles must travel more quickly because their mass remains constant.
The relationship between a gas particle's average kinetic energy and temperature is linear. The pace at which the gas molecules flow rises with temperature. At a specific temperature, the average kinetic energy of all gases is identical.
Molecules of gas move more quickly when they are lighter. Because of this, as the gas's temperature rises, its volume also does so. The more gas particles there are, the more likely it is that they will hit the container's walls, hence the frequency of collisions must rise.
Find out more about kinetic energy
brainly.com/question/29187582
#SPJ4
A student draws a diagram that describes how she thinks people see in the dark. Based on her drawing, she predicts that if people stay
in a totally dark room for a long time, eventually their eyes will adjust to the darkness and they will be able to see.
When she tries this experiment in a totally dark room, it turns out that her prediction was incorrect, and that she is unable to adjust to
the darkness. What should she do with her drawing?
Because her drawing does not accurately represent what really happens, she should make a new version of it that better predicts what she
actually experienced in the dark room.
Because her drawing was not useful in making an accurate prediction, she should discard it and not use drawings anymore to make
predictions.
Because her drawing represents how she thinks the world works, she should not change it but should be confident that she can use it to
make accurate predictions.
O
Because her drawing represents how she thinks the world works, she should use it to make other predictions and keep checking them until
one of them turns out to be correct
Answer:
A: Because her drawing does not accurately represent what really happens, she should make a new version of it that better predicts what she actually experienced in the dark room.
what happens to water with dextrose after a few days?
Since dextrose cannot be autoclaved and IV administration makes sterility essential, even if the solution may be chemically stable for months, the shorter BUD that will be utilized is 14 days according on USP sterility requirements.
What do you mean by Dextrose ?A basic sugar, glucose has the chemical formula C6H12O6. The most prevalent monosaccharide, a type of carbohydrate, is glucose.
(Dextrose dextrorotary glucose), a monosaccharide made from corn, is frequently referred to as "corn sugar" in commerce. It is additionally called glucose. A very refined white sugar, corn sugar has no corn (maize) flavor. Hexose-type sugar glucose contains a group of six carbon atoms.
A simple sugar derived from corn or wheat with the term dextrose is chemically equivalent to glucose, or blood sugar. Dextrose is a typical sweetener used in baked products and is present in things like processed foods and corn syrup.
To know more about Dextrose please click here ; https://brainly.com/question/1940961
#SPJ1
kiki makes a table to compare the particles in a magnesium atom to those in a magnesium ion. a 3 column table with 3 rows. the first column is not labeled but have entries protons, neutrons, electrons. the second column is labeled magnesium atom with entries 12, 12, 12. the last column is labeled magnesium ion with entries x, y, z. she knows that a magnesium ion has an electric field that points away from the ion. what values should she use to complete her table?
The neutral magnesium atom has 12 protons, 12 neutrons, and 12 electrons.Ten electrons, twelve protons, and twelve neutrons make up the magnesium ion.
Protons, neutrons, and electrons make up an element's atom. Protons and electrons are distributed equally among neutral atoms. Gain or loss of electrons causes the formation of ions.
For the atom of magnesium: The neutral magnesium atom has 12 protons, 12 neutrons, and 12 electrons.
Regarding the magnesium ion:
It possesses two less electrons than the magnesium ion. As a result, there are 10 electrons, 12 protons, and 12 neutrons in each magnesium ion.
To know more about protons visit
https://brainly.com/question/12535409
#SPJ4
Answer:B:12 12 10
Explanation:edge
Referring to the drawing to the right.the beaker contains a 5% salt solution and the bag contains a 15%salt solution in which direction will water move
According to the concept of diffusion the water will move from 5% salt solution to 15%salt solution.
What is diffusion?Diffusion is defined as the process of movement of molecules which takes place under concentration gradient. It helps in movement of substances in and out from the cell.The molecules move from lower concentration region to a higher concentration region till the concentration becomes equal.
There are 2 main types of diffusion:
1) simple diffusion-process in which substances move through a semi-permeable membrane without the aid of transport proteins.
2) facilitated diffusion- It is a passive movement of molecules across cell membrane from higher concentration region to lower concentration.
There are 2 types of facilitated diffusion one is osmosis and dialysis.
Learn more about diffusion,here:
https://brainly.com/question/14852229
#SPJ1
How many liters of carbon dioxide are produced in the combustion of 1.00 g of octane, C8H18?
2C8H18 + 25O2 --> 16CO2 + 18H2O
Answer:
1558.27 ml or 1.56 L
Explanation:
The molecular mass of octane is 114.23 g/mol so 1.00 g of octane equals to:
(1.00 g( x (1 mol/114.23g) = 0.00875 mol
From the chemical equation:
2C8H18 + 25O2 --> 16CO2 + 18H2O
you know that 2 mol of octane will produce 16 mol of CO2
so 0.00875 mol of octane will produce:
0.00875 x (16/2) = 0.07 moleof CO2
The molecular mass of CO2 is 44.01 g/mol so 0.07 mol will equal to
44.01 x 0.07 = 3.0807 g of CO2
Under “standard” conditions of 0 degrees Celsius and 1 atmosphere of pressure, carbon dioxide exhibits a density of 0.001977 g/mL
since d = m/V => V = m/d = 3.0807/0.001977 = 1558.27 ml or 1.56 L
NOTE: if you have a specific temperature or pressure, you can use the formula for ideal gas PV=nRT to solve for volume.
I hope this helps you to understand the question
Potassium iodide is an ionic compound. (i) describe what happens, in terms of electron loss and gain, when a potassium atom reacts with an iodine atom.
Iodine atoms gain electrons in this process, resulting in negatively charged iodide ions, while potassium atoms lose electrons, resulting in positively charged potassium ions. There is oxidation and reduction.
What does oxidation mean?The oxidation status of the substrate can change during redox reactions. Similar to how losing electrons or increasing the oxidation state is oxidation while gaining electrons is reduction.
When oxygen comes into contact with a material or an element, an oxidation reaction occurs. Another way to look about oxidation is as the procedure through which the species of reactants lose their hydrogen. Oxidation is the loss of electrons in a molecule, an atom, or an ion.
Oxidation reactions produce new functional groups in molecules or change existing functional groups in molecules.
To know more about ionic compound visit:-
https://brainly.com/question/9167977
#SPJ4
66.7 mL of Ethanol was dissolved in 222.2 mL of water. What is the volume % of the ethanol in the solution?
Respond with the correct number of signficant figures in scientific notation. (Use E notation and only 1 digit before decimal, for example, 2.5E5 for 2.5 times 10 to the power of 5)
66.7 mL of Ethanol was dissolved in 222.2 mL of water. the volume % of the ethanol in the solution is 30.0 %.
Given that :
volume of the solute = 66.7 mL
volume of the solution = 222.2 mL
by using the volume % formula we can directly determine the volume % of ethanol, the percent by volume expression is given as :
volume % = (volume of solute / volume of solution ) × 100 %
volume % = (66.7 / 222.2 ) × 100 %
volume % = 0.300 × 100 %
volume % = 30 .0 %
( v / v ) % = 30.0 %
Thus, the percent by volume is 30.0 %.
To learn more about percent by volume here
https://brainly.com/question/23847585
#SPJ4
Given 5.67 x 1023 molecules of NaF, how many moles are present?
Answer:
a
Explanation:
What do atoms consist of:____.
A. elements
B. compounds
C. charged and uncharged particles
D. neutrons moving around a nucleus
Answer: i think is D
Explanation:
current u.s $1 coins are composed of manganese-brass consisting of 6.0% zinc, 3.5% manganese, 2.0% nickel, and the remaining Cu. each dollar has a total mass of 8.1 G. Calculate the mass of each of the four metal constituents in the dollar coin 
The mass of the zinc in the dollar coin is about 0.486 grams, the mass of the manganese is about 0.285 grams, the mass of the nickel is about 0.162 grams, and the mass of the copper is about 7.135 grams.
What is an alloy?
An alloy is the mixture of two or more elements, at least one of which is a metal. Alloys are typically created to improve upon the properties of the individual metals, such as increasing strength or corrosion resistance. They are used in a wide range of applications, including in the construction of buildings, vehicles, and electronic devices. The specific properties of an alloy depend on the metals that it is made of and the proportion of each metal in the mixture.
According to the problem:
The mass of each metal in the dollar coin has some specific percentage.
Multiply the percentage composition of the metal by the total mass of the coin to determine the mass percentage for each metal:
Zinc: [tex]6.0\% \times 8.1 grams = \frac{6.0}{100} \times 8.1=0.486 grams[/tex]
Manganese: [tex]3.5\% \times 8.1 grams = \frac{3.5}{100} \times 8.1=0.285 grams[/tex]
Nickel: [tex]2.0\% \times 8.1 grams = \frac{2.0}{100} \times 8.1=0.162 grams[/tex]
Copper:
[tex](100\% - 6.0\% - 3.5\% - 2.0\%) \times 8.1 grams = 88.5\% \times 8.1 grams = \frac{88.5}{100} \times 8.1=0.486 grams[/tex]
So the mass of the zinc in the dollar coin is about 0.486 grams, the mass of the manganese is about 0.285 grams, the mass of the nickel is about 0.162 grams, and the mass of the copper is about 7.135 grams.
To know more about alloy, visit:
https://brainly.com/question/1759694
#SPJ1
Which TWO of the following changes can be classified as physical
A. Ice melting on a warm day
B. Fireworks going off on July 4th
C. Baking soda reacting with vinegar
D. Glass shattering as it hits the floor
The two changes that can be classified as physical are as follows:
Ice melting on a warm day (option A)Glass shattering as it hits the floor (option D).What is a physical change?A physical change in chemistry is a change affecting the form of a chemical substance, but not its chemical composition.
When matter changes its observable properties, we can say it has undergone a physical change.
Physical change is a type of change where the physical properties of matter change. Physical changes include;
State of matterchange in colourchange in odoursolubilityTherefore, melting of ice, which is a change of state and shattering of glass are examples of physical change.
Learn more about physical change at: https://brainly.com/question/17931044
#SPJ1
how many electrons can be contained in all of the orbitals with a principle energy level of 3?
Answer:
Thus, the second principal energy level can hold up to eight electrons, two in the s orbital and six in the p orbital. The third principal energy level has one s orbital, three p orbitals, and five d orbitals, which can each hold up to 10 electrons. This allows for a maximum of 18 electrons.
How many moles of chlorine gas can be produced if 4 moles of fecl3 react with 4 moles of o2.
6 moles of chlorine gas can be produced if 4 moles of fecl3 react with 4 moles of o2.
FeCl3+O2-->Fe2O3+Cl2 is not balanced.
We first need to balance the equation. The balanced equation:
4FeCl3 + 3O2 ==> 2Fe2O3 + 6Cl2
moles FeCl3 present =4 moles
moles O2 present = 4 moles
Since the mole ration in the balanced equation is 4 FeCl3 : 3 O2, the limiting reactant will be FeCl3.
So, moles Cl2 that can be produced = 4 moles FeCl3 x 6Cl2/4 moles FeCl3 = 6 moles Cl2.
What do you mean by Chlorine gas?
Chlorine gas is a greenish-yellow gas with a pungent odor that is highly toxic and corrosive. It is often used as a disinfectant and bleach in water treatment and swimming pools. Exposure to chlorine gas can cause severe irritation of the eyes, skin, and respiratory tract, and can even be fatal in large doses.
What are Moles?
Moles are a unit of measurement in chemistry used to measure the amount of a substance. The mole is defined as the amount of a substance that contains as many elementary entities (atoms, molecules, ions, etc.) as there are atoms in exactly 12 grams of carbon-12. The mole is a base unit in the International System of Units (SI) and has the symbol mol.
To know more about moles,
https://brainly.com/question/1427235
#SPJ4
Which intermediate product does not
evolve into a gas?
A) NH₂OH(aq)
B) H₂CO3(aq)
C) H₂SO3(aq)
D) NaCl(aq)
Answer:C
Explanation:I got it correct not no genius though.
what is the name of the compound made of zinc ions, zn⁺², and fluoride ions, f⁻¹?
Zinc fluoride is the term given to the mixture of the ions zinc (zn+2) and fluoride (f1).
Is zinc reactive or stable?Reactivity, by a reaction with the carbon dioxide in the air. Zinc emits zinc oxide fumes as it burns in the air, which produces a vivid bluish-green flame. With acids, alkalis, and other non-metals, zinc interacts easily.
With what can zinc react?Under normal circumstances, zinc and air quickly react, gradually generating a dull, grey zinc oxide covering. Zinc also combines to halogens, oxygen, chalcogens, alkalis, acids, ammonia and ammonium salts, as well as less reactive metals. Zinc is an amphoteric metal because it may react with the both acids and alkalis.
To know more about Zinc visit:
https://brainly.com/question/13890062
#SPJ4
Which energy output objects work with the solar panels?
Answer:
The energy output objects that work with solar panels include solar inverters, charge controllers, batteries, and electric grid systems.
Explanation:
At the end of the diffusion process, the concentration of substances on each side is.
At the end of the diffusion process, the concentration of substances on each side is. equal. This is because the diffusion process causes the substances to move from areas of high concentration to areas of low concentration until they are evenly distributed.
What is concentration?
Concentration in chemistry is calculated by dividing a constituent's abundance by the mixture's total volume. Mass concentration, molarity, number concentration, as well as volume concentration are four different categories of mathematical description. Any type of chemical mixture can be referred to by the term "concentration," but solutes as well as solvents in solutions are most frequently mentioned. There are different types of molar (amount) concentration, including normal concentration as well as osmotic concentration. The word "concentration" is derived from the French verb "concentrer," which means "to put at the centre" and comes from the root con-.
To learn more about concentration
https://brainly.com/question/23437000
#SPJ4
why should care be taken tha tht easample is above the solvent level before the tlc plat eis placed into the devleioping hcambe
If the solvent level covers the sample, the sample spot will be washed off into the solvent before it travels up the TLC plate
The intermolecular interactions between the solvent and the solute are the main determinant of the solubility of the solute in a given solvent. The solute will dissolve in the solvent if the solvent surrounds and solvates the solute. In contrast to interactions between the solute and other solutes or between the solvent and other solvents, the solute must therefore create greater interactions with the solvent in order to dissolve. It is questionable if a homogeneous solution will develop in a mixture if the solvent-solute interactions are weaker than the solvent-solvent interactions and the solute-solute interactions.
why should care be taken tha tht easample is above the solvent level before the tlc plat eis placed into the devleioping hcambe
Learn more about solvent here:
https://brainly.com/question/14797683
#SPJ4
the pka of acetic acid (hc2h3o2) is 4.8. if you make a buffer that contains 0.1 m hc2h3o2 and 0.2 m nac2h3o2, what is the approximate ph of the solution?
Solutions Buffer. pH of solution is adjusted by adding 0.10 M HCl to 100 mL of water. A buffer aids in pH maintenance while adding M NaCH. 3. COO (sodium acetate) (sodium acetate).
How do I figure out pKa?The negative log of the Ka is known as the pKa. All we would need to do is take the Ka and the negative log of it in order to determine the pKa for methanol. Therefore, the pKa is equal to the negative log of 2.9 x 10 16 .
How is pKa determined from pH?There are distinct Ka and pKa values for each dissociation. The weak acid and its conjugate base are present in equal amounts when the moles of base added are half that of the total moles of acid. CB/WA is equal to 1, and the HH equation states that pH = pKa + log(1) or pH = pKa.
Calculation:0.10 M HCl to 100 mL of water
pKa for methanol = 2.9 x 10 16 .
pH = pKa + log(1) or pH = pKa.
To know more about pH scales visit:-
https://brainly.com/question/491373
#SPJ4
A beaker contains a 25 ml solution of an unknown monoprotic acid that reacts in a 1:1 stochiometric ratio with naoh. Titrate the solution with naoh to determine the concentration of the acid.
The molarity of the acid is : 0.82 Molar
Calculate the molarity of acid?
Volume of acid = 25 ml
Molarity of base = 0.5 M
Volume of base = 41.00 ml
Since, acid and base reacts in 1:1 stoichiometric ratio, we can use the molar equivalence formula as:
M(acid) × V(acid) = M(Base) × V(Base)
M(acid) = 0.82 M
What is Molarity?
Molarity (M) is the amount of a substance in a given volume of solution. Molarity is defined as the number of moles of solute per liter of solution. Molarity is also called the molarity of a solution.
To know more about Molarity, check out:
https://brainly.com/question/26873446
#SPJ4
Determine the empirical formula of a compound containing 0.928 g of gallium and 0.412 g of phosphorus.
Empirical formula of a compound can be determined using their number moles in the given weights. Thus number of moles of both gallium and phosphorous are 0.013 . Thus, empirical formula of this composition is GaP.
What is empirical formula?Empirical formula of a compound is derived from the number of moles of each element present in the compound. It will be different from the molecular formula of the compound.
Atomic mass of phosphorous = 31 g/mol
Atomic mass of gallium = 69.72 g/mol
Number of moles of 0.412 g of P = 0.412 g/31 g = 0.013.
No.of moles in 0.928 g of Ga = 0.928 / 69.72 = 0.013.
The ratio of their number of moles = 0.013 :0.013 = 1 :1.
Therefore, the empirical formula of the compound containing 0.928 g of gallium and 0.412 g of phosphorus is GaP.
To find more on empirical formula, refer here:
https://brainly.com/question/14044066
#SPJ1
Which of the following is true of real machines?
The statement that is correct about real machines is that work output is less then work input. So the correct option is A.
Why the statement is correct?This is correct because in a real machine the production of work will never be greater than the input it has of work, since the machines themselves will lose energy in some way during the formation of the production of work. When losing energy, then, there will be less production and material than there was at the beginning of production.
This is quite the opposite in an ideal machine, where all the work that will be put in becomes the work output. It changes because in the ideal situation it does not take into account various variables that occur in reality that can cause energy to be lost in the process.
Therefore, we can confirm that the correct option is A. work output is less then work input.
To learn more about real machine visit: https://brainly.com/question/11752408
#SPJ1
Which of the following is true of real machines?
A. work output is less then work input
B. work output equals work input
C. work input is decreased because of friction
D. work output is greater than work input
write any two utilities of the radiation obtained from nuclear reaction
Answer: Radiation (obtained by nuclear reactions) is used in medicine, academics, industry, and electricity. In addition to that, radiation has been useful in areas such as agriculture, archaeology, space exploration, law enforcement, geology, and many others.
The radiation emitted from nuclear reactions are used in various fields such as medical field, agriculture, research fields etc.
What is nuclear reaction?Unstable radioactive elements undergo emission of charged particles such as alpha or beta and produce their isotopes or new elements. This reactions involving the change to atomic nuclei by reducing the number of protons or neutrons is called nuclear reactions.
The radiation emitted from nuclear reaction is very useful in many fields, especially in medical fields. Many diagnostic techniques are based on radiation. Similarly radiation is used in cancer treatments.
Suitable radiations are used in agricultural field for pest control. There is a branch itself in science to study the various utilities of radiations and there are tremendous experiments and researches are conducted based on suitable radiations.
To find more on uses of radiations, refer here:
https://brainly.com/question/14307079
#SPJ2