the energy transformation that occurs when a firework goes off is a chemical to thermal to light and sound. however, some of the energy is destroyed during the explosion

Comparing the calculated solubility of Ca(OH)₂ (1.924 g/100 mL) to the given value of 0.1 g/100 mL, we can conclude that the solubility of Ca(OH)₂ is greater than 0.1 g/100 mL.

Option (c) is correct.

To determine if the solubility of Ca(OH)₂ is greater than 0.1 g/100 mL based on the given concentration of OH⁻, we need to calculate the solubility of Ca(OH)₂ using the provided concentration.

The balanced chemical equation for the dissociation of Ca(OH)₂ is:

Ca(OH)₂ ⇌ Ca²⁺ + 2OH⁻

From the equation, we can see that for every mole of Ca(OH)₂ that dissolves, two moles of OH⁻ ions are produced. Therefore, the concentration of OH⁻ is twice the concentration of Ca(OH)₂.

Given that the concentration of OH⁻ is 5.2 x 10⁻² M, the concentration of Ca(OH)₂ can be calculated by dividing the concentration of OH⁻ by 2:

Ca(OH)₂ concentration = (5.2 x 10⁻² M) / 2 = 2.6 x 10⁻² M

To determine the solubility of Ca(OH)₂ in grams per 100 mL, we can use the molar mass of Ca(OH)₂:

Solubility of Ca(OH)₂ = (2.6 x 10⁻² M) x (74.1 g/mol) = 1.924 g/100 mL

Comparing the calculated solubility of Ca(OH)₂ (1.924 g/100 mL) to the given value of 0.1 g/100 mL, we can conclude that the solubility of Ca(OH)₂ is greater than 0.1 g/100 mL.

Therefore, the correct answer is c) Yes.

To learn more about solubility  here

https://brainly.com/question/4220579

#SPJ4

To find the half-life of sodium-24, we can use the formula for exponential decay:

N(t) = N₀ * (1/2)^(t / t₁/₂)

Where:

N(t) is the amount of the substance remaining at time t

N₀ is the initial amount of the substance

t is the time elapsed

t₁/₂ is the half-life of the substance

Given:

N₀ = 6.00 mg (initial amount)

N(t) = 0.750 mg (amount after 45 hours)

Plugging in these values, we can solve for t₁/₂:

0.750 mg = 6.00 mg * (1/2)^(45 / t₁/₂)

Dividing both sides of the equation by 6.00 mg:

(0.750 mg) / (6.00 mg) = (1/2)^(45 / t₁/₂)

0.125 = (1/2)^(45 / t₁/₂)

To eliminate the base of 1/2, we can take the logarithm of both sides:

log₂(0.125) = 45 / t₁/₂ * log₂(1/2)

Using the property log₂(a^b) = b * log₂(a):

log₂(0.125) = 45 * log₂(1/2) / t₁/₂

We know that log₂(1/2) = -1, so we can simplify the equation further:

log₂(0.125) = -45 / t₁/₂

Now, we can solve for t₁/₂:

t₁/₂ = -45 / log₂(0.125)

Using a calculator:

t₁/₂ ≈ -45 / (-3) ≈ 15

The half-life of sodium-24 is approximately 15 hours.

Learn more about decay here : brainly.com/question/32086007
#SPJ11

The most appropriate explanation among the given options for the fact that the ion-solvent interaction is greater for Li⁺ than for K⁺ is that "Li⁺ has a smaller ionic radius than K⁺." Option D is correct.

Ionic radius refers to the size of an ion, specifically the distance between the nucleus and the outermost electron shell. Smaller ions tend to have stronger interactions with solvent molecules because the charge is more concentrated in a smaller space, leading to a higher electrostatic attraction between the ion and the surrounding solvent molecules.

In this case, Li⁺ has a smaller ionic radius compared to K⁺. As a result, Li⁺ has a stronger interaction with the solvent molecules, which leads to a greater ion-solvent interaction.

Hence, D. is the correct option.

To know more about ion-solvent interaction here

https://brainly.com/question/14135431

#SPJ4

--The given question is incomplete, the complete question is

"Which of the following explanations accounts for the fact that the ion-solvent interaction is greater for Li⁺ than for K⁺? A) The ionization energy of Li is higher than that for K. B) Li has a lower density than K. C) Li⁺ is of a lower mass than K⁺ D) Li⁺ has a smaller ionic radius than K⁺ E) Li reacts with water more slowly than K."--

To calculate the mass in grams of 8.35 × 10²² molecules of CBr₄ (carbon tetrabromide), we need to use Avogadro's number to convert the given number of molecules to moles and then use the molar mass of CBr₄ to convert moles to grams.

The molar mass of CBr₄ can be calculated by adding up the atomic masses of carbon (C) and four bromine (Br) atoms. The atomic mass of carbon is approximately 12.01 g/mol, and the atomic mass of bromine is approximately 79.90 g/mol.

Molar mass of CBr₄ = (1 × 12.01 g/mol) + (4 × 79.90 g/mol) = 331.74 g/mol

To convert the number of molecules to moles, we divide the given number of molecules by Avogadro's number (6.022 × 10²³ molecules/mol):

Moles of CBr₄ = (8.35 × 10²² molecules) / (6.022 × 10²³ molecules/mol) = 0.138 mol

Finally, to find the mass in grams, we multiply the number of moles by the molar mass:

Mass of CBr₄ = (0.138 mol) × (331.74 g/mol) = 45.80 g

Therefore, the mass in grams of 8.35 × 10²² molecules of CBr₄ is approximately 45.80 grams.

To learn more about molar mass click here : brainly.com/question/31545539

#SPJ11

Answer:

2 Mg + O2 -> 2 MgO

is a synthesis reaction.

For the B₁-B₂ cell pair, B₂ is the cathode, and B₁ is the anode. For the A₁-B₂ cell pair, B₂ is the cathode, and A₁ is the anode. For the A₂-B₂ cell pair, B₂ is the cathode, and A₂ is the anode.

B₁-B₂:

The half-reaction at B₁ is given as A⁺(aq) + 2e⁻ → A(s) with a reduction potential of -0.78 V.

The half-reaction at B₂ is given as B⁺(aq) + e⁻ → B(s) with a reduction potential of -0.45 V.

Since the reduction potential of B₂ (-0.45 V) is more positive than B₁ (-0.78 V), B2 will be the cathode, and B1 will be the anode.

A₁-B₂:

The half-reaction at A₁ is given as C⁺(aq) + 2e⁻ → C(s) with a reduction potential of -0.95 V.

The half-reaction at B₂ is the same as mentioned before B⁺(aq) + e⁻ → B(s) with a reduction potential of -0.45 V.

Since the reduction potential of B₂ (-0.45 V) is more positive than A₁ (-0.95 V), B₂ will be the cathode, and A₁ will be the anode.

A₂-B₂:

The half-reaction at A₂ is given as D⁺(aq) + 2e⁻ → D(s) with a reduction potential of -0.70 V.

The half-reaction at B₂ is the same as mentioned before B⁺(aq) + e⁻ → B(s) with a reduction potential of -0.45 V.

Since the reduction potential of B₂ (-0.45 V) is more positive than A₂ (-0.70 V), B₂ will be the cathode, and A₂ will be the anode.

Learn more about electrode potential here:

https://brainly.com/question/31872210

#SPJ4

Answer:

When we stand on the floor, we apply a force on the floor surface in the downward direction and in return the floor also exerts an upward and equal force on us.

Explanation:

Newton' third law is vey famous and it states that for each and every action, there applies an equal but opposite reaction. Thus the action force and the reaction force always acts on pairs. But they does not contribute to the motion of the object.

One such example that illustrates the action and reaction force from Newton's law is when we stand on the floor we exert a force on the floor surface in downward direction. The floor surface also exerts an opposite and equal force on us in the upward direction.

Answer:

11g/cm^3

Explanation:

The density of a substance can be found By

density= Mass/volume

From the question

mass = 22 g

volume = 2 cm³

22/2=11

We have the final answer as

11 g/cm³

Answer:

11g/cm^3

Explanation:

It is because the constant formula density is

Density=Mass/ Volume.

Therefore we have

Density=22g/2cm^3

Which is = 11g/cm^3

Answer:

moles Pb(NO₃)₂ ≅ 0.0213 mole (three sig. figs.)

Explanation:

converting...

grams to moles => divide by formula weight

moles to grams => multiply by formula weight

for this problem ...

moles Pb(NO₃)₂ = 7.04g / 331.2g/mol = 0.021256 (calculator answer)

≅ 0.0213 mole (three sig. figs.)

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore,  the number of moles in 7.04 g of lead (II) nitrate, Pb(NO₃)₂ is 0.0212moles.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

Mathematically,

mole =given mass ÷ molar mass

Molar mass of 1 mole of  Pb(NO₃)₂ = 331.2g/mol

given mass of Pb(NO₃)₂=7.04g

Substituting the values in above formula we get

moles of Pb(NO₃)₂ = 7.04g / 331.2g/mol

moles of Pb(NO₃)₂ = 0.0212moles

Therefore,  the number of moles in 7.04 g of lead (II) nitrate, Pb(NO₃)₂ is  0.0212moles.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2

The final concentration of the solution is determined as 0.59 M.

The concentration of a solution or molarity of a solution is defined as the ratio of number of moles of solute to the liters of the solution.

Molarity, M = n / V

where;

The final concentration of the solution is calculated as follows;

the number of moles = 0.5 m

the total volume after adding 500 ml of water = 340 ml + 500 ml = 840 ml = 0.84 L

Molarity = 0.5 m / 0.84 L

Molarity = 0.59 M

Thus, the final concentration of the solution is determined as 0.59 M.

Learn more about concentration here: https://brainly.com/question/26255204

#SPJ4

Answer:

10.4 hours

Explanation:

Now from;

0.693/t1/2 = 2.303/t log (No/N)

t1/2= half life of the radioactive isotope

t = age of the radioactive isotope

No= Original amount of radioactive isotope

N= amount of radioactive isotope left after time t

Substituting values;

N = 0.0625No

0.693/2.6 = 2.303/t log (No/0.0625No)

0.693/2.6 = 2.303/t log (1/0.0625)

0.267 = 2.303/t * log 16

0.267 = 2.773/t

t = 2.773/0.267

t = 10.4 hours

Answer:

B. An equation that shows only those particles involved in the reaction, and that is balanced for both mass and charge

Explanation:

A net ionic equation is a chemical equation that will only show the elements, compounds, and ions that are directly involved in the chemical reaction. It comes from the balanced molecular equation and should be balanced by both mass and charge.

Answer:

Explanation:

true.                        

Answer:

True. why?

Because the fluid that is lost through the blood vessels is restored but with no central pump or heart, this device releases and collects fluid.

Answer:

The answer is

2 moles of hydrogen react with 1 mole of oxygen to form 2 moles of water

You can take physics as a hobby and also it is great that you like both maths and physics as well and also want to be an computer science engineer because physics and math

Answer:  Shaun must consume 6 more g of protein to reach the required amount.

Explanation:

Given : Recommended amount of protein = 200 calories

Now 4 calories = 1 gram of protein

Thus 200 calories = [tex]\frac{1}{4}\times 200=50[/tex] g of protein.

Calories consumed per day by Shaun = 176 calories

176 calories =  [tex]\frac{1}{4}\times 176=44[/tex] g of protein.

Thus Shaun need to consume = (50-44) g = 6 of protein to reach the required amount.

Shaun must consume 6 more g of protein to reach the required amount.

CBr₄ has a higher vapor pressure at the same temperature than CCl₄. The statement is False.

The vapor pressure of a liquid is the pressure exerted by the vapor of the liquid in equilibrium with the liquid. The vapor pressure of a liquid depends on the strength of the intermolecular forces in the liquid. The stronger the intermolecular forces, the lower the vapor pressure.

In the case of CCl₄ and CBr₄, the intermolecular forces are London dispersion forces. The size of the atom or molecule affects the strength of the London dispersion forces. The larger the atom or molecule, the stronger the London dispersion forces.

Bromine is larger than chlorine, so the intermolecular forces in CBr₄ are stronger than the intermolecular forces in CCl₄. Therefore, CCl₄ will have a higher vapor pressure than CBr₄ at the same temperature.

To know more about vapor pressure, refer here:

https://brainly.com/question/29640321#

#SPJ11

At a pressure of 537.7 torr, pure water would boil at approximately 95.8°C.

To calculate the boiling point of water at a given pressure, we can use the Clausius-Clapeyron equation:

ln(P2/P1) = (-ΔHvap/R) × (1/T2 - 1/T1)

where:

P1 and P2 are the initial and final pressures,

ΔHvap is the molar enthalpy of vaporization,

R is the ideal gas constant (8.314 J/(mol·K)),

T1 is the initial temperature,

T2 is the final temperature.

In this case, we want to find the boiling point (T2) of water at a pressure of 537.7 torr. The normal boiling point of water is 100°C (373.15 K) at atmospheric pressure (760 torr).

We can rearrange the equation to solve for T2:

T2 = (1/(((-ΔHvap/R) × (1/T1)) + (ln(P2/P1))))

Substituting the given values:

P1 = 760 torr

P2 = 537.7 torr

ΔHvap = 40.7 kJ/mol (convert to J/mol by multiplying by 1000)

R = 8.314 J/(mol·K)

T1 = 373.15 K

T2 = (1/(((-40.7 kJ/mol × 1000 J/kJ) / (8.314 J/(mol·K)) × (1/373.15 K)) + (ln(537.7 torr/760 torr))))

Calculating this expression gives us:

T2 ≈ 95.8°C

Therefore, at a pressure of 537.7 torr, pure water would boil at approximately 95.8°C.

Learn more about Clausius-Clapeyron equation from the link given below.

https://brainly.com/question/29409537

#SPJ4

Answer:

producer to decomposer

Explanation:

This is because in a food chain , energy flow from one trophic level to another. The producer which include plants are the source of energy which they manufacture good in the presence of light energy from sun. Energy flow directly from the producer to the primary consumer which are heterotrophs that feed on plants. Energy flow from consumer to decomposer after the consumer died and it is decayed.

Answer:

there will be winds moving from 25miles per hour to 30 miles per hour towards the east

Answer:

C: Warm water is denser than cold water

The mass of the ice melted by a complete transfer of thermal energy is 83.84 g.

The mass of the ice melted by a complete transfer of thermal energy is calculated by applying the following equation as follows;

Q = mcΔθ

where;

heat gained by the ice = heat loss by the steam

The mass of the ice melted by a complete transfer of thermal energy is calculated;

m x heat of fusion = 12.39g x heat of vaporization

m x 334 J/g = 12.39 g  x 2260 J/g

334m = 28,001.4

m = 28,001.4 / 334

m = 83.84 g

Learn more about heat capacity here: https://brainly.com/question/16559442

#SPJ4

The pressure equilibrium constant expression for the given reaction 2Li3N(s) ⇌ 6Li(s) + N2(g) is given below: P = (PN2 ) (PLi)6/ (PLi3N )2Where, PN2 is the partial pressure of nitrogen PLi is the partial pressure of lithiumPLi3N is the partial pressure of lithium nitride.

The above formula of pressure equilibrium constant expression gives the ratio of the product of partial pressures of reactants and products to the power of their stoichiometric coefficients. Here, the stoichiometric coefficients of Li3N, Li and N2 are 2, 6 and 1 respectively. The reaction 2Li3N(s) ⇌ 6Li(s) + N2(g) represents the dissociation of lithium nitride to lithium and nitrogen gases. The dissociation reaction is endothermic.

As the temperature increases, the dissociation of lithium nitride increases which results in the formation of more lithium and nitrogen gas molecules. Therefore, the value of the equilibrium constant for this reaction increases with increasing temperature. The above-pressure equilibrium constant expression helps to determine the equilibrium concentration of reactants and products when the reaction is in equilibrium.

know more about pressure equilibrium,

https://brainly.com/question/32260359

#SPJ11

Answer:

4. Reactant

5. Left

I hope this helps ❤️❤️

The transition wavelength, λ is given as:λ = (hc)/Eλ = (6.626 x 10^-34 Js * 3 x 10^8 m/s)/(4.585 x 10^-20 J)λ = 4.325 x 10^-7 mλ = 432.5 nmTherefore, if the length of the box is doubled, the transition wavelength remains the same as 200 nm.

The length of the box, L = 1 nm.The transition wavelength, λ = 200 nm.Formula:For particle in a one-dimensional box,For the energy of a particle in a one-dimensional box,E = (n²h²)/(8mL²)where, n = quantum numberh = Planck's constanm = mass of the particleL = length of the box.1. For the lowest energy level,n = 1E₁ = (n²h²)/(8mL²)E₁ = (1²h²)/(8mL²)E₁ = (1*6.626 x 10^-34 Js)²/(8(9.11 x 10^-31 kg)(1 x 10^-9 m)²)E₁ = 9.170 x 10^-20 JFrom the above formula, the probability of finding the particle within 0.01 nm of the center of the box is given as:ψ(x) = sqrt(2/L)sin(nπx/L)Probability, P = ∫ψ²dxFrom the above formula, the probability of finding the particle within 0.01 nm of the center of the box for the lowest-energy level is given as:P = ∫[sqrt(2/L)sin(πx/L)]²dxP = ∫2/L sin²(πx/L)dxP = 2/L * L/2P = 1Hence, the probability of finding the particle within 0.01 nm of the center of the box for the lowest-energy level is 1.2. For the first excited state,n = 2E₂ = (n²h²)/(8mL²)E₂ = (2²h²)/(8mL²)E₂ = (4*6.626 x 10^-34 Js)²/(8(9.11 x 10^-31 kg)(1 x 10^-9 m)²)E₂ = 3.668 x 10^-19 JFrom the above formula, the probability of finding the particle within 0.01 nm of the center of the box for the first excited state is given as:P = ∫[sqrt(2/L)sin(2πx/L)]²dxP = ∫2/L sin²(2πx/L)dxP = 2/L * L/2P = 0.5Hence, the probability of finding the particle within 0.01 nm of the center of the box for the first excited state is 0.5.3. (i) If the mass of the particle is doubled:For the energy of a particle in a one-dimensional box,E = (n²h²)/(8mL²)The energy of a particle is inversely proportional to the mass of the particle.Hence, if the mass of the particle is doubled, the energy of the particle is halved.E = 0.5E₁ = 0.5(9.170 x 10^-20 J)E = 4.585 x 10^-20 JFrom the above formula, the transition wavelength, λ is given as:λ = (hc)/Eλ = (6.626 x 10^-34 Js * 3 x 10^8 m/s)/(4.585 x 10^-20 J)λ = 4.325 x 10^-7 mλ = 432.5 nm(ii) If the charge of the particle is doubled:The charge of the particle does not have any effect on the energy of the particle.Therefore, the transition wavelength, λ remains the same as 200 nm.(iii) If the length of the box is doubled:For the energy of a particle in a one-dimensional box,E = (n²h²)/(8mL²)The energy of a particle is inversely proportional to the length of the box.Hence, if the length of the box is doubled, the energy of the particle is halved.E = 0.5E₁ = 0.5(9.170 x 10^-20 J)E = 4.585 x 10^-20 JFrom the above formula, the transition wavelength, λ is given as:λ = (hc)/Eλ = (6.626 x 10^-34 Js * 3 x 10^8 m/s)/(4.585 x 10^-20 J)λ = 4.325 x 10^-7 mλ = 432.5 nmTherefore, if the length of the box is doubled, the transition wavelength remains the same as 200 nm.

Learn more about transition wavelength here:

https://brainly.com/question/31641614

#SPJ11

Answer:

VOLTIC CELL

Battery

Electrical to chemical

Endothermic

Electrolysis

Chemical to electrical

Anode

Anode to cathode

Battery

Endothermic

Negative

Enthomeric

Reduction

Oxidation

ELECTRYOTIC CELL

No

Non spontaneous

positive

negative

yes

Anode

Electrical to chemical

Anode to cathode

Exothermic

positive

oxidation

Electroplating

Chemical to electrical

The balanced equation of the redox reaction is:5NO2−+ 6H+ + 2MnO4− → 5NO3− + 2Mn2+ + 3H2O.

Redox reaction involving the permanganate ion in acidic solution:5NO2−+ 6H+ + 2MnO4− → 5NO3− + 2Mn2+ + 3H2OThe balanced redox reaction that involves the permanganate ion in acidic solution is given by:5NO2−+ 6H+ + 2MnO4− → 5NO3− + 2Mn2+ + 3H2OFor balancing the given reaction in acidic solution, we follow the given steps:Step 1: Writing the unbalanced reaction in the ionic form:Step 2: Separating the half-reactions for oxidation and reduction:Oxidation half-reaction: 5NO2− → 5NO3−Reduction half-reaction: 2MnO4− → 2Mn2+Step 3: Balancing the number of atoms of elements in half-reactionsBalancing oxidation half-reaction:5NO2− → 5NO3− + 10H+ + 2e-Balancing reduction half-reaction: 16H+ + 2MnO4− → 2Mn2+ + 8H2O + 5e-Step 4: Balancing the number of electrons lost and gained in each half-reaction by multiplying by a coefficient.Oxidation half-reaction: 5NO2− → 5NO3− + 10H+ + 2e-Balancing reduction half-reaction: 16H+ + 2MnO4− → 2Mn2+ + 8H2O + 5e-Now, the electrons lost and gained are balanced.Step 5: Balancing the number of hydrogen ions in each half-reaction:Oxidation half-reaction: 5NO2− + 10H+ → 5NO3− + 2e-Balancing reduction half-reaction: 2MnO4− + 16H+ → 2Mn2+ + 8H2O + 5e-Step 6: Balancing the number of oxygen atoms in each half-reaction by adding H2O molecules to the side that needs it. For acidic solution, add H+ ions to balance the oxygen atoms.Oxidation half-reaction: 5NO2− + 10H+ → 5NO3− + 2e-Balancing reduction half-reaction: 2MnO4− + 16H+ → 2Mn2+ + 8H2O + 5e-Now, the number of oxygen atoms is balanced.Step 7: Adding half-reactions, multiplying by integers (if necessary) to equalize the electrons in each half-reaction, and canceling species common to both sides.5NO2− + 2MnO4− + 16H+ → 5NO3− + 2Mn2+ + 8H2OFinally, the balanced equation of the redox reaction is:5NO2−+ 6H+ + 2MnO4− → 5NO3− + 2Mn2+ + 3H2O.

Learn more about  balanced equation here:

https://brainly.com/question/31242898

#SPJ11

Answer:

A

Explanation: