The elaboration likelihood model emphasizes the use of __________ persuasion and __________ persuasion methods. a. direct . . . elaborative b. peripheral . . . elaborative c. direct . . . peripheral d. indirect . . . direct

Answers

Answer 1

The elaboration likelihood model emphasizes the use of direct persuasion and peripheral persuasion methods.

What is direct persuasion and peripheral persuasion?

This theory involves a dual process which explains how attitudes are changed in individuals through persuasion.

These methods help in the formation of attitude which makes, in this case,  option use of direct persuasion and peripheral persuasion.

See more about persuasion at brainly.com/question/25799066

#SPJ4

Answer 2

Answer:

C. direct . . . peripheral

Explanation:

Because I said so.


Related Questions

I have ten moles of iron atoms in the reactant side of a reaction. Do I have enough information to determine how many moles of iron atoms I will have following the reaction? If so, how many moles of iron atoms will I have at the end of a reaction? If not, what else do I need to know?

Answers

Answer:

See below

Explanation:

If your reaction equation is balanced, you will know the number of Fe atoms following the reaction.....it will be the same on both sides of the equation.

Why can alkaline batteries not be recharged

Answers

Answer:

The biggest risk with recharging alkaline batteries is leakage. As you probably know, alkaline batteries leak even under normal circumstances. Internal off gassing, made worse by heat, creates pressure that can breach battery seals. Therefore, the risk of leakage is an even bigger risk when recharging.

when 2 moles of C6H6 react with excess Oxygen gas, how many moles of water are produced?
C6H6 + 9 O2 ------> 6CO2 + 6 H20

Answers

Answer:

12 moles H₂O

Explanation:

To find the amount of water produced, you need to use the given amount and multiply it by the mole-to-mole ratio from the equation. These numbers are the coefficients of the molecules you are converting from and to. When writing the ratio, make sure to arrange it in a way that allows for the cancellation of units.

1 C₆H₆ + 9 O₂ ----> 6 CO₂ + 6 H₂O

2 moles C₆H₆          6 moles H₂O
---------------------  x  -------------------------  =  12 moles H₂O
                                 1 mole C₆H₆

how does air move around the earth

Answers

Sun heats the Earth more at the equator than at the poles

Calculate the volume of hydrogen chloride gas, HCl at s.t.p that would yield 1.2dm3 of 0.15mol/dm3 aqueous HCl solution. (Molar volume of a gas at s.t.p = 22.4dm3)

Answers

The volume of hydrogen chloride gas, HCl at s.t.p yielded is determined as 4.032 dm³.

Number of moles of the HCl gas yield

The number of moles of the gas yield is calculated as follows;

n = 1.2 dm³ x 0.15 mol/dm³

n = 0.18 mole

one mole of HCl gas at stp = 22.4 dm³

0.18 mole = ?

= 0.18 x 22.4 dm³

= 4.032 dm³

Thus, the volume of hydrogen chloride gas, HCl at s.t.p yielded is determined as 4.032 dm³.

Learn more about volume of gas here: https://brainly.com/question/25736513

#SPJ1

For compounds of similar size and/or molar mass, which attractive force would result in the highest melting point

Answers

The compounds with high Intermolecular forces , will result in the highest melting point.

What is Melting Point ?

The temperature at which the solid and liquid form of a solvent are in equilibrium and applying any more heat will lead to melting of the solid into liquid is called Melting Point.

The Intermolecular force that would result in highest melting point is the Ion-Ion interaction , the more the bonding the higher will be the melting point.

To know more about Ion-Ion Interaction

https://brainly.com/question/7988007

#SPJ1

A new band sensation is playing a concert and recording it for a live album to be released this summer. select all the statements that are true for band producing sound.

a) the frequency or amplitude of the sound waves will not change
b) the frequency or amplitude of the sound waves will change if the singer varies their voice
c)producing sound changes the wane from an electromagnetic wave to a mechanical wave
d)the produced sound waves are mechanical waves
e)the produced sound waves are electromagnetic waves
f) producing the sound does not change the wave type
g) producing sound changes the wave from mechanical wave to an electromagnetic wave

Answers

They travel in compressions and rarefactions and are propagated through air.

What are sound waves?

Sound waves are longitudinal waves. They travel in compressions and rarefactions and are propagated through air.

The following are true about sound waves:

the frequency or amplitude of the sound waves will change if the singer varies their voice.the produced sound waves are mechanical waves. producing the sound does not change the wave type

Learn more about sound waves:https://brainly.com/question/11797560

#SPJ1

Identify the solutions among the following mixtures
Soil, Sea water, Air, Coal, Soda water​

Answers

Answer:

Out of the above mixtures, seawater, air, and soda water are solutions.

hope this helps :3

A balloon inflated in a room at ayo℃ has a volume
of 4,004, the balloon is then heated to a tempicture of
58°C. What is the new volume if the pressure remains constient?

Answers

Answer:

new volume = 4.458 Liters

Explanation:

A balloon inflated in a room at 24°c has a volume of 4.00Liters The balloon is heated to a temperature of 58°c.What is the new volume if the pressure remains constant

charles law

volume1/temperature1 = volume2/temperature2

temperature has to be converted to kelvin

temperature 1 = 24+273=297

temperature 2 = 58+273=

4/297 = volume2/331

volume2 = (4*331)/297

volume2 = 4.45791245791 Liters

https://brainly.in/question/10937106?

How does the kinetic energy of solids, liquids, and gases compare?
OA. Gases have no kinetic energy, solids have a little, and liquids have
the most.
O
B. Gases have the same kinetic energy as liquids, which is more than
solids.
O
C. Gases have the highest kinetic energy, followed by liquids, and
then solids.
O D. Gases have the lowest kinetic energy, followed by liquids, and then
solids.

Answers

Answer:

Gases have the highest kinetic energy, followed by liquids, and then solids.

Explanation:

Question:

How does the kinetic energy of solids, liquid, and gases compare ?

Context:

Higher kinetic energy causes particles to vibrate or move around faster. Solids have the lowest kinetic energy so vibrate very little.

Liquids have more kinetic energy so particles slide past each other.

Gases have the most kinetic energy so fly around in the air.

Answer:

C

Explanation:

you can relate this with their temprature, more kinetic energy means more movement of molecules. This creates heat which then melts or vaporizes substances. So, as K.E increases a substance will change from solid to liquid and eventually gas.

In a neutralization reaction, an aqueous solution of an arrhenius acid reacts with an aqueous solution of an arrhenius base to produce:.

Answers

An aqueous solution of an arrhenius acid reacts with an aqueous solution of an arrhenius base to produce water and salt.

What is a Salt?

This is a compound which is formed as a result of a neutralization reaction between acid and base.

Arrhenius acid reacts with an aqueous solution of an arrhenius base to produce water and salt due to increased concentration of H+ and OH- respectively.

Read more about Salt here https://brainly.com/question/13818836

#SPJ1

How many atoms are in 3.2 moles of N2

Answers

Answer:

38.54 x 10^23 atoms of N2

Explanation:

Each mole contains Avagadro's Number ( 6.022 x10^23) of particles

   3.2   x     6.022 x 10^23 = 19.27 x 10^23 MOLECULES

   N2  is TWO atoms    soooo    2 x 19.27 x 10^23 = 38.54 x 10^23 atoms

What is the name of the configuration management procedure that involves the collection of information about a system under normal operating conditions, to be used as a comparison when conditions are abnormal

Answers

The name of the configuration management procedure that involves the collection of information about a system under normal operating conditions is Baselining.

What is Baselining?

Baselining is a management process used to analyze a collection of information about a particular system.

This procedure (Baselining) is well known to analyze computer performance in a given network.

In conclusion, the name of the configuration management procedure that involves the collection of information about a system under normal operating conditions is Baselining.

Learn more about Baselining here:

https://brainly.com/question/25836560

#SPJ1

Which planet do scientists believe prevented the asteroids in the asteroid belt from forming a planet?.

Answers

The planet that scientists believe prevented the asteroids in the asteroid belt from forming a planet is Jupiter.

What are asteroids?

Asteroids are known to be leftovers from the formation of the solar system for about 4.6 billion years ago.

Why Jupiter prevented asteroids

The gravity in Jupiter is so strong, that it caused the instability of asteroid orbits within the Kirkwood gapsIt prevented planetary bodies from forming in between Mars and itselfIt also caused small objects to collide with each other and fragment into the asteroids seen today

Therefore, Jupiter made asteroids form group of debris, rather than forming a planet.

Learn more about asteroids here:

https://brainly.com/question/11996385

#SPJ1

Ahmed doesn't believe in electromagnetism so he makes an electromagnet to prove his teacher wrong. To his surprise, the electromagnet works and he's able to pick up metal objects with it. Even still, he's not satisfied with his electromagnet because it's very weak. What can he do to make it stronger?

Answers: use a weaker battery
1. use a stronger battery
2. use a plastic nail
3. glue the wire to the nail
4. wrap the wire around the nail fewer times

Answers

Answer:

1) Use a stronger battery

Explanation:

I'm going to quote Northeastern University (I could try to type out an explanation but this will probably be more concise)

"Electromagnets are made of coils of wire with electricity passing through them. Moving charges create magnetic fields, so when the coils of wire in an electromagnet have an electric current passing through them, the coils behave like a magnet."

4) So, if the coils are creating a moving charge, and there are more coils, each coil will be "setting up" its own magnetic field.  This means that less coils will make the electromagnet weaker

2) Because it is an electromagnet, a plastic nail is not going to produce the same effect. An electromagnet is picking up metal, and it is not picking up plastic. This is because plastic (a material with low permeability) does not have a magnetic field that is able to interact with a magnet.

[Permeability is a measure of how easily magnetic lines of force can pass through a material.]

3) There's not really a point that I can imagine of gluing the wire to the nail. Glue would put more distance between the nail and the magnet than nothing being there at all.

1) More voltage in a battery produces a larger current in the wire. This means that the strength of an electromagnet is affected by the voltage/strength of the battery. So, a stronger battery would make the electromagnet stronger, and a weaker battery would make the electromagnet weaker.

The electromagnet works, and he's able to pick up metal objects with it, he does to make it stronger  to use a stronger battery. Therefore, option 1 is correct.

What is electromagnet ?

An electromagnet is a type of magnet where an electric current creates the magnetic field. The wire that makes up an electromagnet is typically twisted into a coil. A magnetic field is produced by a current flowing through the wire and is concentrated in the hole in the center of the coil.

Electrical devices including motors, generators, speakers, computers, and MRI machines cannot be built without electromagnets. They are well known for their ability to lift and move heavy magnetic objects, such as scrap iron.

Many electromagnets have an advantage over permanent magnets because they can be easily turned on and off, and increasing or decreasing the amount of electricity flowing around the core can control their strength.

Thus, option 1 is correct.

To learn more about electromagnet, follow the link;

https://brainly.com/question/3427992

#SPJ2

Ammonia is produced by reacting hydrogen and nitrogen gases. If 30.0L of hydrogen is mixed with 12.0L of nitrogen at the same temperature and pressure, what is the maximum volume of ammonia gas that could be produced?

Answers

[tex](2.4L)NH_3[/tex] is the maximum volume of ammonia gas that could be produced.

What is a mole?

A mole is a very important unit of measurement that chemists use. A mole of something means you have 602,214,076,000,000,000,000,000 of that thing, like how having a dozen eggs means you have twelve eggs.

Here is the balanced equation:

[tex]N_2 +3H_2[/tex] → [tex]2NH_3[/tex]

At STP, 1 mole has a volume of 22.4 Liters. To do a dimensional analysis conversion from Liters to moles:

Please observe that Liters and moles vary directly, therefore, we can simply multiply each of the coefficients (that represent moles) by

1.2 L to obtain the volumes:

[tex]\frac{N Litres}{1} \frac{1}{22.4 Litres} =\frac{N }{22.4} mole[/tex]

[tex](1.2L)N_2+(3.6L)H_2 = (2.4L)NH_3[/tex]

Hence, [tex](2.4L)NH_3[/tex] is the maximum volume of ammonia gas that could be produced.

Learn more about the moles here:

https://brainly.com/question/15209553

#SPJ1

pls help me with this chem question

Answers

Answer:

B

Explanation:

i just know

Answer:

B

Explanation:

Hydrocarbons are with hydrogen and carbon only, so therefore you can immediately eliminate C and D. Therefore, we are left with A and B. Unsaturated hydrocarbons have double bonds or more, so B would be our answer (Double bond between carbon 1 and 2)

how many moles of oxygen from the are needed to consume 2.49 mol c55h104o6

Answers

The answer is approximately 20

What is a real-life example of equilibrium and what would happen if there was a shift in the system of that example?

Answers

Answer:

Refrigerator

Explanation:

Think about it. Equilibrium is between 2 "places", and if you didn't open the fridge, there would be a buildup of cold air.

Because of that buildup, it would keep getting colder until it isn't possible to get cold anymore. That is equilibrium.

However, if you were to open the door for a very, very long time, you would lower the temp. inside the fridge, therefore causing for the room you are in to be slightly colder, and the fridge to decrease in cold. The fridge will still be slightly cold, but it won't be lukewarm if you leave it for 2 hours. (Unless it's broken)

That is equilibrium :)

Common Tasks for Chemists.

Answers

Answer:

analysis organic and inorganic compounds,refine substances and chemicals products

I need help please;-;

Answers

The order of increasing reactivity of the metals is: magnesium, sodium, and potassium.

How does the reactivity of metals increase?

The reactivity of metals increases as one goes down the group and increases from right to left in th periodic table.

For the three elements, sodium potassium, and Magnesium, the least reactive is magnesium while the most reactive is potassium.

This is because of increase in reactivity based on the properties of the elements.

Therefore, the order of increasing reactivity of the metals is: magnesium, sodium, and potassium.

Learn more about reactivity of metals at: https://brainly.com/question/24866635

#SPJ1

6. Explain the impact on fresh water of:
a. Farming wastes
b. Household pollutants
c. Industrial wastes
d. Erosion
e. Oil and Gasoline
f. heat
7. In your opinion which of the above-mentioned pollutions is more dangerous?

Answers

Fresh water pollutants  are substances which pollute fresh water and  industrial waste, is most harmful fresh water pollutant to man and aquatic organisms.

What are pollutants?

Pollutants are substances which cause harm when they are present in the environment.

Pollutants include chemicals such as petroleum and material such as sewage.

The presence of pollutants in freshwater results in water pollution and make the water unfit for drinking purposes and also harms aquatic life in freshwaters.

Some freshwater pollutants include:

Farming wastesHousehold pollutantsIndustrial wastesErosionOil and Gasolineheat

Of these pollutants, the most dangerous fresh water pollutant is industrial wastes as they kill aquatic organisms most due to the presence of harmful chemicals in them.

Therefore, fresh water pollutants such as industrial waste is most harmful to man and aquatic organisms.

Learn more about pollutants at: https://brainly.com/question/1235358

#SPJ1

From the dissolution of a gas sample, two more gases were obtained, namely 150 cm3 of N2 and 450 cm3 of H2 .What is the formula for dissolved gas.

Answers

450 X 250 X + 25m this is correct

how many grans of NaoH Are needed to neutralize grans of H2So4​

Answers

Answer :]

to convert from g NaOH to mol NaOH. = 1.48 g NaOH are needed to neutralize the acid.

Classify the following as mixtures or pure substances. (a) the vegetable soup you had for lunch (b) the fertilizer your dad spreads on the front lawn in the spring (c) the salt you sprinkle on your French fries (d) the hydrogen peroxide you cleaned a cut finger with

Answers

(a) The vegetable soup you had for lunch: mixtures substances

(b) The fertilizer your dad spreads on the front lawn in the spring:   mixtures substances

(c) the salt you sprinkle on your French fries: pure substances

(d) the hydrogen peroxide you cleaned a cut finger with:  pure substances

What are mixtures?

In chemistry and related fields, a mixture refers to a substance that is composed of two or more substances. This is the opposite of a pure substance that has not been combined with others. In the case of vegetable soup, this is a mixture because it integrates multiple substances such as water, salt, vegetables, etc.

On the other hand, a mixture is classified as homogeneous if the elements are completely integrated, and the final substance is uniform or as heterogeneous if the mixture is not uniform. In the case of the soup, this can be classified as a heterogeneous mixture because in most cases you can identify the elements in it such as pieces of vegetables and therefore it is not a uniform or homogeneous mixture.

Thus, this could be the answer.

To learn more about mixture click here:

https://brainly.com/question/7709515

#SPJ1

How to balance the equation Mg2+HO2=Cu3O+H2

Answers

I think the answer is 2Mg + H2O4 = Cu12O4 + 2H

I’m really not sure though so it might be wrong… I’m not the best at balancing equations lol

When an atom loses an electron, it becomes d. ionized. e. a plasma. a. dissociated. b. an isotope. c. sublimated.

Answers

Answer:

When an atom loses an electron it becomes ionized

What is the mass of 5.00 moles of KaS04?
A
34.8 grams
B
174 grams
C
675 grams
D
870 grams

Answers

Answer: D

Explanation:

I assume you meant [tex]\text{K}_{2}\text{SO}_{4}[/tex].

The atomic mass of potassium is 39.0983 g/mol.The atomic mass of sulfur is 32.065 g/mol.The atomic mass of oxygen is 15.9994 g/mol.

So, the formula mass of potassium sulfate is 2(39.0983)+32.065+4(15.9994)=174.2592 g/mol.

So, 5.00 moles have a mass of (5.00)(174.2592), which is about 870 g

Select all statements that correctly describe the stability of eclipsed and staggered conformers. Multiple select question. Staggered conformers possess torsional strain. Eclipsed conformers possess torsional strain. Staggered conformers are lower in energy than eclipsed conformers. Electron-electron repulsion between bonds in an eclipsed conformer may contribute to the low energy of this conform

Answers

Eclipsed conformers possess torsional strain and Staggered conformers are lower in energy than eclipsed conformers are TRUE about the stability of conformers.  

What does 'eclipsed conformers' mean?

Eclipsed conformers are molecular arrangements where two substituents are very close and thus produce torsion.

Moreover, Staggered conformers are molecular arrangements where substituents are found at a maximum length.

In conclusion, Eclipsed conformers possess torsional strain and Staggered conformers are lower in energy than eclipsed conformers are TRUE about the stability of conformers.  

Learn more about Eclipsed conformers here:

https://brainly.com/question/17634613

#SPJ1

The distance between city A and city B is 22 miles. The distance between city B and city C is 54 miles. The distance between city A and city C is 51 miles.

What type of triangle is created by the three cities?

an acute triangle, because 222 + 542 >512
an acute triangle, because 222 + 512 >542
an obtuse triangle, because 222 + 542 >512
an obtuse triangle, because 222 + 512 >542

Answers

The type of triangle that is created by the three cities is an obtuse triangle, because 22 + 51 > 54.

What is an obtuse triangle?

Obtuse triangle is a type of triangle in which any of its angle is greater than 90 degrees, and the sum of the interior angles must by equal to 180 degrees.

Considering length AB and AC = 22 miles + 51 miles = 73 miles

The sum of length AB and AC is greater than length BC, and the opposite angle of side BC is greater than 90 degrees.

Thus, the type of triangle that is created by the three cities is an obtuse triangle, because 22 + 51 > 54.

Learn more about obtuse triangle here: https://brainly.com/question/5023725

#SPJ1

Other Questions
18 lb. 6 oz. divided by 7 (asap) Will mark brainliest!! Compare and contrast the American and French Revolutions. Talk about the economic, political, or social conditions that were present. What is the only u. S. City to have hosted the winter olympics twice?. How would a modern crime scene investigation Unit have helped to establish David Milgaards innocence On which objects (from Model 3- above) would a compass help identify North and South directions?Moon, Callisto, and GanymedeVenus, Earth, and GanymedeVenus, Earth, and Mars In 2019, selected automobiles had an average cost of $12,000. the average cost of those same automobiles is now $13,200. what was the rate of increase for these automobiles between the two time periods? ( What does nine + ten equal? What is the function of the Output Unit Please I need help asap A cone has a height of 15 feet and a radius of 11 feet. What is its volume?Use 3.14 and round your answer to the nearest hundredth.cubic feet? 5/6 of all the money in Salma's bank account is 55,000. how much money does Salma have in her bank account?please answer tn=2(n-1)Given the formula for the nth term, state the first 5 terms of each sequence. Combine like terms to simplify the expression:-50 m+ 10-3 m+ (-13) = If you have (4-9x)+23/9 what is the value of xA 17B 23C 5D 2 What is the ......from Lagos to benin by air There are 60 feet between the bases on a softball diamond. How far does a catcher throw drone home plate to second base Why did the formation of League of Nation mandates in the former Ottoman Empire lead to conflict? The mandates conflicted with regions formed by earlier agreements.The mandates were different sizes, which made some stronger than others.The mandates had different resources that were important to other regions.The mandates were formed without consideration of cultural, religious, and ethnic borders. can someone please help me find a line passing through the points (3,8) and (5,10)? I will reward branliest to the one who gets it correct. please help asap!!what effect did Chinese culture have on Korea during the postclassical period? PLEASE HELP URGENTA triangle has one side that is 5 units long, one 25 angle, and one 90 angle. Complete the two diagrams to create two different triangles with these measurements. Label the 90 angle in each diagram.