The density of a pure liquid at 25 degrees Celsius was calculated by determining the mass and volume of a sample of the liquid. A student measured the mass of a clean, dry 25.00 mL volumetric flask, filled the flask to its calibration mark with the liquid, and then measured the mass of the flask and liquid. The recorded measurements are shown in the table above. On the basis of this information, to how many significant figures should the density of the liquid be reported?
Answers
Answer
The density of the liquid is 0.82 g/mL.
Explanation:
From the question given above, the following data were obtained:
Mass of empty flask = 18.990 g
Mass of flask + liquid = 39.439 g
Volume of liquid = 25 mL
Density of liquid =..?
Next, we shall determine the mass of the liquid. This can be obtained as follow:
Mass of empty flask = 18.990 g
Mass of flask + liquid = 39.439 g
Mass of liquid =.?
Mass of liquid = (Mass of flask + liquid) – (Mass of empty flask)
Mass of liquid = 39.439 – 18.990
Mass of liquid = 20.503 g
Finally, we shall determine the density of the liquid as follow:
Mass of liquid = 20.503 g
Volume of liquid = 25 mL
Density of liquid =..?
Density = mass / volume
Density of liquid = 20.503 / 25
Density of liquid = 0.82 g/mL
Related Questions
What happens to the particles of a liquid when energy is removed from them?
A. The motion of the particles increases and the distance between the particles increases.
B. The motion of the particles increases and the distance between the particles decreases.
C. The motion of the particles decreases and the distance between the particles increases.
D. The motion of the particles decreases and the distance between the particles decreases.
Answers
Answer:
b im pretty sure it is b
Explanation b The motion of the particles increases and the distance between the particles decreases.
The motion of the particles decreases and the distance between the particles increases, the correct option is C.
What are different states of matter?The matter is anything that has mass and occupies space.
Matter can exist in four different states: solid, liquid, gas, and plasma.
By examining the arrangement of molecules, it is possible to comprehend the characteristics of the many forms of matter.
The state of a solid turns to a liquid when it is heated past its melting point.
A liquid turns into a gas when it is heated past the point at which it vaporizes.
Solids have a distinct shape and dimension and are densely packed.
Liquids fill the container's space and are loosely packed.
Gas has a large intermolecular distance and is not stiff.
When energy is removed from the particles of a liquid, the speed gets slowed, and so the motion decreases, as the motion is limited they become packed and the distance between them decreases, and the intermolecular forces increases.
To know more about Different states of matter
brainly.com/question/1134312
#SPJ6
А. B
Which of the following is true about the picture above? What would it be?
Answers
Answer:
Container A is a solution and Container B is a colloid.
Explanation:
Container A is a solution as the tyndall efffect is not present. You cannot see the light bean through the glass.
Container B is a suspension or a colloid as you can see the beam through the glass.
The first option proposes Container A is a colloid...this is not correct
The third option is not true as the tyndall effect is only displayed in container B
The fourth option is not correct the tyndall effect is not present in container A meaning it would not be a suspension or a colloid and you can see the tyndall effect in container B indicating its not a solution
Technetium-104 has a half-life of 18.0 minutes. How much of a 165.0 g sample remains after 126 minutes?
Answers
Answer:
1.28g
Explanation:
honestly just put it a half life caculator i couldnt tell you how to do it if my life depended on it ♂️
You are conducting an experiment with two very reactive substances. One will react with oxygen (O) and other substances in the air, and the other will react to metal in a container. What type of environment can you seal them in so they only react with each other?
Answers
Answer:
seal them in a glass container in an atmosphere of argon (Ar) gas
Explanation:
Calculate the volume 3.00 moles of a gas will occupy at 24.0 °C and 762.4 mm Hg.
Answers
Answer:
Use formula of PV = nRT
Change formula to solve for Volume = nRT/P
R is a constant 0.08206
Convert C to Kelvin which is just +273
And turn mmHg into atm which is around 1 atm
Plug in and solve
7 Which activity occurs in a plant cell but NOT in an animal cell? *
A Energy is released after food molecules are broken down.
B Materials are transported from one part of the cell to another part of the cell.
C Waste molecules are stored in vacuoles.
D Food is produced using light energy.
Answers
Answer:
don't know sorry
Explanation:
(-_-)
In reality, energy conversion from burning fuel is never 100% efficient. Significant loss of energy due to heating occurs. If the generator were only 20% efficient (which is more realistic), how much energy in joules would be converted to electrical energy and how much would be lost to heat? (2 points)
Answers
Answer:
Electrical energy = 130000000 J and Heat energy = 520000000 J
Explanation:
Multiply the amount of joules from the last question (650000000) by .20 and .80. (Which are the percentages)
by . Figure the density of the liquid in each beaker: The mass and volume of each liquid have been given in Table 1. Using the formula for density and a calculator, figure the density of each liquid and record it in the density column of Table 1. Round and write your answer out to the nearest hundredth. (This means you will have two numbers after the decimal point.) Don't forget to write the units!!!!!! (Hint: The formula was the answer to #2 on the front page.)
Answers
Answer:
Well what are the numbers but ik that it ius 5
Explanation:
A student states that photosynthesis is conducted only in plant cells and that cellular respiration occurs only in animal cells. Tell whether the student is correct and why. In your response, be sure to describe both processes and the structures involved. Upload your answer below.
Answers
Answer:
This is correct
Explanation:
This is correct because for photosynthesis you need organelles such as chloroplasts, chloroplasts absorb light energy and convert it into usable energy for plants. Animal cells do not have chloroplasts/similar organelles so they can't absorb energy from the sun, Animal cells use mitochondria which takes energy from our food and breaks it down into usable energy(such as ATP) to be transported.
what do you mean by international understanding peace
and cooperation
Answers
Answer:
International understanding or internationalism is a feeling that the individual is a not only a member of his country, but a member of the world as well. To ensure world peace. To prevent world wars. To promote human welfare. To promote mutual understanding and interdependence.
What do Lucille's cells need in order for her body to function properly? How might a problem with Lucille's respiratory system lead to low levels of oxygen in her cells? Why does having low levels of oxygen in her cells make it difficult for Lucille to play soccer?
Answers
Answer:
In order for her body to act correctly, Lucille's cells require glucose and oxygen. A problem with Lucille's respiratory system leading to low levels of oxygen in her cells is known as Hypoxemia. Having low levels of oxygen in her cells will make it difficult for Lucille to play soccer because she would not be able to breathe .If her respiratory system doesn't function properly, so enough oxygen molecules will not move into her respiratory system , ensuring that her cells won't have enough oxygen molecules. Playing soccer is difficult if you don't have enough air.Explanation:
ABOUT HYPOXEMIA -: It is called hypoxemia to have low oxygen levels in your blood. It is called hypoxia to have insufficient oxygen levels in the tissues. Hypoxemia at high altitudes can occur. Hypoxemia that induces low levels of oxygen in the tissues of the body is called hypoxia. The two words are often used by people interchangeably, but they are not the same thing.
The capacity of the body to supply normal amounts of oxygen to the blood can interfere with a number of conditions and circumstances. Some of hypoxemia's most prevalent causes include:
Heart problems, heart defects included .Lung disorders such as asthma , bronchitis, emphysema. High-altitude areas where oxygen is lower in the air. Powerful drugs for pain or other conditions that delay respiration . Sleep apnea (breathing impairment during sleep) .Lung tissue inflammation or scarring (as in pulmonary fibrosis).Answer:
In order for her body to act correctly, Lucille's cells require glucose and oxygen.
A problem with Lucille's respiratory system leading to low levels of oxygen in her cells is known as Hypoxemia.
Having low levels of oxygen in her cells will make it difficult for Lucille to play soccer because she would not be able to breathe .If her respiratory system doesn't function properly, so enough oxygen molecules will not move into her respiratory system , ensuring that her cells won't have enough oxygen molecules. Playing soccer is difficult if you don't have enough air.
Explanation:
ABOUT HYPOXEMIA -: It is called hypoxemia to have low oxygen levels in your blood. It is called hypoxemia to have insufficient oxygen levels in the tissues. Hypoxemia at high altitudes can occur. Hypoxemia that induces low levels of oxygen in the tissues of the body is called hypoxia. The two words are often used by people interchangeably, but they are not the same thing.
The capacity of the body to supply normal amounts of oxygen to the blood can interfere with a number of conditions and circumstances. Some of hypoxemia's most prevalent causes include:
Heart problems, heart defects included .
Lung disorders such as asthma , bronchitis, emphysema.
High-altitude areas where oxygen is lower in the air.
Powerful drugs for pain or other conditions that delay respiration .
Sleep apnea (breathing impairment during sleep) .
Lung tissue inflammation or scarring (as in pulmonary fibrosis).
Based on the article "Will the real atomic model please stand up?," describe what Dalton's theory states about a molecule of water. Dalton's theory about compounds tells us that all water molecules have different kinds of atoms, two hydrogen atoms for every one oxygen atom.
Answers
Answer:
Follows are the solution to this question:
Explanation:
The characterization with water molecules would be that light waves are made up of 2 different types of atoms (2 hydrogen and 1 oxygen atoms), as per the Dalton theory. There are many multiple times as many atoms of hydrogen as oxygen atoms in each water molecules. For every two hydrogen atoms, all water molecules have one oxygen atom.
Answer:
Sample Response: Dalton’s theory about compounds tells us that all water molecules have different kinds of atoms, two hydrogen atoms for every one oxygen atom.
Explanation:
Arrange the following metals in order of increasing reactivity Pb,Al, Sn,Q,Au,and Mg.
Answers
Answer:
Sn, Q,Au, Al,Pb
Explanation:
Because thats hw that works
HOPE IT HElPS
Which of the following is true about metals?
A. They are usually less reflective in luster than metalloids.
B.
They are usually better conductors than nonmetals.
C. They are usually less malleable than nonmetals.
D.
They are usually more brittle than metalloids.
Answers
An element, X, has 2 isotopes, X-32 with an abundance of 31.5% and X-35 with an abundance
of 68.5%. What is the average atomic mass of element X?
Answers
Answer:
amu = 34.055 or 34.1
Explanation:
to calculate the average mass, first convert the percentages into decimals. Then, calculate the mass numbers. To get this number, multiply the decimal by the mass number for each isotope and, then add them together.
( 0.315 x 32 ) + (0.685 x 35 ) = 34.055
What occurs to the particles in a fluid during convection ?
Answers
Answer: what are options
Explanation:
Which event is part of a convection current in the air?
A. Cool air sinks.
B. Cool air rises.
C. Warm air swirls.
D. Warm air sinks
Answers
Answer:
The answer is (Cool air sinks)
Explanation:
hope I help
The Cool air sinks are the part of a convection current in the air. Therefore, option A is correct.
What is convection current ?Convection currents are a type of natural heat transfer that involves the transfer of energy and heat from one location to another. We can use the sensation of heat when placing our hands over a campfire as an example of this. Convection currents are to blame for this.
Convection is a method of heat transfer in which gases or liquids are moved between areas of varying temperatures. Natural or free convection is the term used to describe convection that occurs naturally.
Convection currents move heat from one place to another by using the mass motion of a fluid, such as water, air, or molten rock. Convection currents' ability to transfer heat is what drives ocean currents, atmospheric weather, and geology.
Thus, option A is correct.
To learn more about convection current, follow the link;
https://brainly.com/question/9739063
#SPJ5
Plowing is an example of what Energy?
a. Kinetic Energy
b. Potencial Energy
Answers
Answer:
mechanical or kinetic eg hammer and nails
Scientists and nutritionists have long suspected that high-fructose corn syrup, used to
sweeten soft drinks, is one of the causes of childhood obesity. In a recent study, at the
University of Cincinnati, researchers found that mice that drank water with added
fructose ate less solid food, gained more weight, and put on 90% more body fat than
mice that drank only water. Scientists concluded that fructose may affect metabolism in
a way that favors fat storage.
What is the independent variable?
The mice that drank only water
The presence of fructose in their diet
The quantity of water provided
The weight gained by the mice
Answers
Answer:
The presence of fructose in their diet
Explanation:
The independent variable in an experiment is the type of variable which is changed at intervals in order to study if it has a direct effect on the dependent variable.
The dependent variable in the experiment is the amount of weight gained by the mice in each group and the control group is the mice who drank the water without the fructose added.
Explain how you would dilute a 1 mol/dm solution to one-tenth of its original
concentration.
Answers
Answer:
13.123.
Explanation:
When boiling a pot of water on the stove without a lid on the pot, the _____________. A energy and water molecules are free to escape into the surrounding environment. B molecules can escape out into the environment, but the energy are forced to stay in the system. C energy can escape out into the environment, but the molecules are forced to stay in the system. D both the energy and molecules are trapped in the system.
Answers
Answer:
A) Energy and Water molecules are free to escape into the surrounding environment.
Explanation:
Hello! This is the correct answer! (I took the K12 test)
I hope this helps! Have a blessed day! :)
When boiling a pot of water on the stove without a lid on the pot, the energy and water molecules are free to escape into the surrounding environment.
What is boiling?Boiling point of a substance is the temperature at which the substance changes from liquid state to gaseous state where these two systems comes in equilibrium.
Thus when a liquid is boiled, the liquid molecules get more energy to move apart and they escape into gaseous state. With change in state of the substance, the energy also be transferred from the liquid to the environment.
If the pot is closed with a lid, then both energy can be transferred but molecules get trapped inside. But here the pot is open and thus the gas molecules and energy are free to move outside.
Therefore, option A is correct for the boiling of water in an open pot.
To learn more about boiling, refer the link below;
https://brainly.com/question/23026747
#SPJ5
2. What are the units for the mass of a solid? mass of a liquid?
Answers
Answer:
I'm not sure myself but I'd say mass since it's a solid
Would love some help pleaseee. and please at least read the question instead of skipping it please.
Measuring tools can have errors. Errors lead to ___________________ results and _______________ conclusions. To calculate the difference of the accepted value and the experimental value, scientists use this formula:
percent error = (experimental value − ) × 100. accepted value
Minimizing Bias
People show bias when they want everyone to accept their results. Bias can arise for many reasons:
• Companies show bias when they depict only the research details that are in the best interest of their ____________.
• Scientists may be biased toward their _____________ and modify results suit their needs.
• Scientists may also show to bias get their research published in ______________ ______________.
Such biases often lead to _______________ facts. An important part of scientific thinking is identifying biases and taking the necessary steps to minimize them.
For results to be considered scientifically accurate, any scientist, regardless of his or her own bias, should be able to replicate the experiment and get the same results.
Summary
Think of some studies you’ve heard about. How can you tell whether the studies were well-designed and scientifically accurate or had biases?
Answers
Answer: this looks like your homework
Explanation:if you want help you are going to have to ask a specific question instead of giving people your homework.
Answer:
Honestly I would search this up maybe there might be a pdf with the answers. Sorry chemistry isn't my thing:(
Explanation:
The ion X2- belongs to an element in Group
Answers
Answer:
ion X²- an element in group VI A.
Which statements about scientific explanations are true?
I. Scientific explanations must prove that a hypothesis is true.
II. Scientific explanations should be based on evidence or data.
III. Scientific explanations must have logical and consistent arguments.
IV. Scientific explanations should use scientific principles, models, and theories.
Answers
Answer:
The statement that is true is:
II. Scientific explanations should be based on evidence or data.
~Lylliara Jackson~
lonic bonding
10. If two atoms that differ in electronegativity combine by chemical reaction and
share electrons, the bond that joins them will be
(1 Point)
ionic bond
polar covalent
nonpolar covalent
a hydrogen bond
Answers
Answer:
polar covalent
Explanation:
If they do not equally share the electron then it is polar and covalent bonds share electrons
Choose each statement that is scientific.
a. The universe's average temperature and rate of expansion support the idea that it began as one super-dense and hot mass 13.8 billion years ago.
b.The opinions of randomly selected participants in a survey prove the idea that global temperatures are not increasing on Earth.
c.Ocean tides are caused by the uneven gravitational pulls of the Moon and Sun on different parts of Earth.
d.Human life is more valuable than other forms of life on Earth because humans are more intelligent than other organisms.
Answers
Answer:
he universe's average temperature and rate of expansion support the idea that it began as one super-dense and hot mass 13.8 billion years ago.
Ocean tides are caused by the uneven gravitational pulls of the Moon and Sun on different parts of Earth.
Explanation:
These statements are objective truths or rational speculations adequately supported by evidence. The others are from unreliable sources, and are based on opinion.
the answer is A!
Answer:
A and C are correct, I took the test
Explanation:
A physical change is easier / more difficult to reverse than a chemical change.
Answers
Answer:
the answer is that a physical change is easier to reverse then a chemical change.
Explanation: In order for a physical change to take place it's easier to just undo what happened then if it was a chemical change because in order for very few chemical changes to reverse to it's original substance you would need another chemical change.
Rubbing alcohol or isopropanol can be described by the chemical formula C3H7OH. One milliliter of isopropanol has a mass of 0.76 g, so its density is 0.76 g/mL. Isopropanol is often used as a cleaner or a disinfectant and evaporates when placed on warm objects. However, caution must be taken when using isopropanol, because it is also highly flammable. Which of the following is a chemical property of isopropanol?
A. One mL of isopropanol has a mass of 0.76 g.
B. Isopropanol has a density of 0.76 g/mL.
C. Isopropanol evaporates when placed on a warm object.
D. Isopropanol is flammable.
Answers
A chemical property of isopropanol : D. Isopropanol is flammable.
Further explanationThere are changes that occur in the mater: physical changes and chemical changes
Classification uses the principle of the initial and final state of the substance.
Physical changes do not form new substances, so the properties of the particles remain the same.(size,volume,shape)
Example : boiling and freezing, just change its phase form from liquid to gas or from liquid to solid
Chemical changes/reaction form new substances(products) that are different from the initial substances(reactants)
Example : toxic, corroded
So :
the physical properties of isopropanol :mass, density, evaporation
the chemical properties of isopropanol :highly flammable
Answer:
D. Isopropanol is flammable.
Explanation:
Mass, volume, temperature, phase of matter, color, texture, density, and hardness are all examples of physical properties. However, flammability is an example of a chemical property.
Chemical properties describe an object's potential to change its chemical composition. These properties depend on the types of atoms found in the object and the arrangement of those atoms (and their subatomic particles).
Which element has the electron con guration 1s 2 2s 2 2p 3 ? A. boron B. nitrogen C.
uorine D. phosphorus
Answers
Answer:
I believe it’s nitrogen
Explanation:
Becasue nitrogen is the 7th element